FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 12-21-2011, 09:22 AM
AlanKim Zimmerman
 
Default Bug#627372: Console turns black during boot.

I revisited this problem tonight, and it seems related to the xserver-xorg-video-intel package.

In desperation, I uninstalled it.

# uname -a
Linux alanz-laptop 3.1.0-1-686-pae #1 SMP Mon Nov 14 08:24:20 UTC 2011 i686 GNU/Linux



It now boots without problems.

The video seems fine, I get
# glxgears
1503 frames in 5.0 seconds = 300.567 FPS

It seems to be running on the fbdev.

Extract from /var/log/Xorg.0.log
-----------------------------------


[*** 39.149] (II) LoadModule: "intel"
[*** 39.251] (WW) Warning, couldn't open module intel
[*** 39.251] (II) UnloadModule: "intel"
[*** 39.251] (II) Unloading intel
[*** 39.251] (EE) Failed to load module "intel" (module does not exist, 0)


[*** 39.251] (II) LoadModule: "vesa"
[*** 39.251] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[*** 39.259] (II) Module vesa: vendor="X.Org Foundation"
[*** 39.259]**** compiled for 1.11.0, module version = 2.3.0


[*** 39.259]**** Module class: X.Org Video Driver
[*** 39.259]**** ABI class: X.Org Video Driver, version 11.0
[*** 39.259] (II) LoadModule: "fbdev"
[*** 39.259] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so


[*** 39.260] (II) Module fbdev: vendor="X.Org Foundation"
[*** 39.260]**** compiled for 1.11.0, module version = 0.4.2
[*** 39.260]**** ABI class: X.Org Video Driver, version 11.0
[*** 39.260] (II) VESA: driver for VESA chipsets: vesa


[*** 39.260] (II) FBDEV: driver for framebuffer: fbdev
[*** 39.260] (++) using VT number 7

[*** 39.281] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[*** 39.281] vesa: Ignoring device with a bound kernel driver


[*** 39.281] (WW) Falling back to old probe method for vesa
[*** 39.281] (II) Loading sub module "fbdevhw"
[*** 39.281] (II) LoadModule: "fbdevhw"
[*** 39.282] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so


[*** 39.293] (II) Module fbdevhw: vendor="X.Org Foundation"
[*** 39.293]**** compiled for 1.11.2.901, module version = 0.0.2
[*** 39.293]**** ABI class: X.Org Video Driver, version 11.0
[*** 39.293] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so


[*** 39.293] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[*** 39.294] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[*** 39.294] (II) FBDEV(1): using default device
[*** 39.294] (II) FBDEV(1): Creating default Display subsection in Screen section


-----------------------------------

Note: If I boot with 'Debian GNU/Linux, with Linux 3.0.0-1-686-pae', the screen stays black.

Alan
 
Old 12-22-2011, 09:16 AM
Jonathan Nieder
 
Default Bug#627372: Console turns black during boot.

Hi Alan,

Alan Zimmerman wrote:

> I revisited this problem tonight, and it seems related to the
> xserver-xorg-video-intel package.
>
> In desperation, I uninstalled it.
>
> # uname -a
> Linux alanz-laptop 3.1.0-1-686-pae #1 SMP Mon Nov 14 08:24:20 UTC 2011 i686 GNU/Linux
>
> It now boots without problems.
[...]
> Extract from /var/log/Xorg.0.log
> -----------------------------------
> [ 39.149] (II) LoadModule: "intel"
> [ 39.251] (WW) Warning, couldn't open module intel

When the console turns black, is the machine still usable? (For example,
can you use ctrl-alt-delete to reboot?) Please also check whether booting
in "recovery mode" with xserver-xorg-video-intel installed works.

If it does, please get "dmesg" output and output from

/usr/share/bug/xserver-xorg-video-intel/script 3>&1

after booting and reproducing the problem. It should be possible to
get this information by either "driving blind" or ssh-ing in from
another machine.

Thanks and hope that helps,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111222101617.GB6548@elie.Belkin">http://lists.debian.org/20111222101617.GB6548@elie.Belkin
 
Old 12-22-2011, 12:19 PM
AlanKim Zimmerman
 
Default Bug#627372: Console turns black during boot.

Hi

I reinstalled the video-intel package.

When the console turns black, the machine is still usable. Booting in recovery mode makes no difference.

Attached are the dmesg logs, and the bug script output, after booting normally with the driver installed.



Regards
* Alan

On Thu, Dec 22, 2011 at 12:16 PM, Jonathan Nieder <jrnieder@gmail.com> wrote:


Hi Alan,



Alan Zimmerman wrote:



> I revisited this problem tonight, and it seems related to the

> xserver-xorg-video-intel package.

>

> In desperation, I uninstalled it.

>

> # uname -a

> Linux alanz-laptop 3.1.0-1-686-pae #1 SMP Mon Nov 14 08:24:20 UTC 2011 i686 GNU/Linux

>

> It now boots without problems.

[...]

> Extract from /var/log/Xorg.0.log

> -----------------------------------

> [ * *39.149] (II) LoadModule: "intel"

> [ * *39.251] (WW) Warning, couldn't open module intel



When the console turns black, is the machine still usable? *(For example,

can you use ctrl-alt-delete to reboot?) *Please also check whether booting

in "recovery mode" with xserver-xorg-video-intel installed works.



If it does, please get "dmesg" output and output from



* * * */usr/share/bug/xserver-xorg-video-intel/script 3>&1



after booting and reproducing the problem. *It should be possible to

get this information by either "driving blind" or ssh-ing in from

another machine.



Thanks and hope that helps,

Jonathan



-*- mode: compilation; default-directory: "/usr/share/bug/xserver-xorg-video-intel/" -*-
Compilation started at Thu Dec 22 14:59:50

/usr/share/bug/xserver-xorg-video-intel/script 3>&1
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Apr 9 2011 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2048200 Dec 11 13:33 /usr/bin/Xorg

VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)

/etc/X11/xorg.conf does not exist.

/etc/X11/xorg.conf.d does not exist.

KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1

Kernel version (/proc/version):
-------------------------------
Linux version 3.1.0-1-686-pae (Debian 3.1.5-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Sun Dec 11 20:40:16 UTC 2011

Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 32827 Oct 24 13:47 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 33559 Oct 24 16:57 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 36788 Nov 8 16:52 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 32778 Dec 22 14:45 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 33.675]
X.Org X Server 1.11.2.902 (1.11.3 RC 2)
Release Date: 2011-12-09
[ 33.675] X Protocol Version 11, Revision 0
[ 33.675] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 33.675] Current Operating System: Linux alanz-laptop 3.1.0-1-686-pae #1 SMP Sun Dec 11 20:40:16 UTC 2011 i686
[ 33.675] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=7910f557-5c71-42d1-bfd8-4ff17af1d3fd ro vga=785
[ 33.676] Build Date: 11 December 2011 11:26:25AM
[ 33.676] xorg-server 2:1.11.2.902-1 (Cyril Brulebois <kibi@debian.org>)
[ 33.676] Current version of pixman: 0.24.0
[ 33.676] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 33.676] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33.676] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 22 14:45:26 2011
[ 33.889] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 33.982] (==) No Layout section. Using the first Screen section.
[ 33.982] (==) No screen section available. Using defaults.
[ 33.983] (**) |-->Screen "Default Screen Section" (0)
[ 33.983] (**) | |-->Monitor "<default monitor>"
[ 34.018] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 34.018] (==) Automatically adding devices
[ 34.018] (==) Automatically enabling devices
[ 34.182] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 34.182] Entry deleted from font path.
[ 34.456] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 34.456] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 34.456] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 34.474] (II) Loader magic: 0xb77f8580
[ 34.474] (II) Module ABI versions:
[ 34.474] X.Org ANSI C Emulation: 0.4
[ 34.474] X.Org Video Driver: 11.0
[ 34.474] X.Org XInput driver : 13.0
[ 34.474] X.Org Server Extension : 6.0
[ 34.476] (--) PCI:*(0:0:2:0) 8086:2a42:1025:034b rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000050d0/8
[ 34.476] (--) PCI: (0:0:2:1) 8086:2a43:1025:034b rev 7, Mem @ 0xd3400000/1048576
[ 34.476] (II) Open ACPI successful (/var/run/acpid.socket)
[ 34.476] (II) LoadModule: "extmod"
[ 34.662] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 34.671] (II) Module extmod: vendor="X.Org Foundation"
[ 34.671] compiled for 1.11.2.902, module version = 1.0.0
[ 34.671] Module class: X.Org Server Extension
[ 34.671] ABI class: X.Org Server Extension, version 6.0
[ 34.671] (II) Loading extension SELinux
[ 34.671] (II) Loading extension MIT-SCREEN-SAVER
[ 34.671] (II) Loading extension XFree86-VidModeExtension
[ 34.671] (II) Loading extension XFree86-DGA
[ 34.671] (II) Loading extension DPMS
[ 34.671] (II) Loading extension XVideo
[ 34.671] (II) Loading extension XVideo-MotionCompensation
[ 34.671] (II) Loading extension X-Resource
[ 34.671] (II) LoadModule: "dbe"
[ 34.671] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 34.672] (II) Module dbe: vendor="X.Org Foundation"
[ 34.672] compiled for 1.11.2.902, module version = 1.0.0
[ 34.672] Module class: X.Org Server Extension
[ 34.672] ABI class: X.Org Server Extension, version 6.0
[ 34.672] (II) Loading extension DOUBLE-BUFFER
[ 34.672] (II) LoadModule: "glx"
[ 34.672] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 34.690] (II) Module glx: vendor="X.Org Foundation"
[ 34.690] compiled for 1.11.2.902, module version = 1.0.0
[ 34.690] ABI class: X.Org Server Extension, version 6.0
[ 34.690] (==) AIGLX enabled
[ 34.690] (II) Loading extension GLX
[ 34.690] (II) LoadModule: "record"
[ 34.690] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 34.691] (II) Module record: vendor="X.Org Foundation"
[ 34.691] compiled for 1.11.2.902, module version = 1.13.0
[ 34.691] Module class: X.Org Server Extension
[ 34.691] ABI class: X.Org Server Extension, version 6.0
[ 34.691] (II) Loading extension RECORD
[ 34.691] (II) LoadModule: "dri"
[ 34.691] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 34.705] (II) Module dri: vendor="X.Org Foundation"
[ 34.705] compiled for 1.11.2.902, module version = 1.0.0
[ 34.705] ABI class: X.Org Server Extension, version 6.0
[ 34.705] (II) Loading extension XFree86-DRI
[ 34.705] (II) LoadModule: "dri2"
[ 34.706] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 34.706] (II) Module dri2: vendor="X.Org Foundation"
[ 34.706] compiled for 1.11.2.902, module version = 1.2.0
[ 34.706] ABI class: X.Org Server Extension, version 6.0
[ 34.706] (II) Loading extension DRI2
[ 34.706] (==) Matched intel as autoconfigured driver 0
[ 34.706] (==) Matched vesa as autoconfigured driver 1
[ 34.706] (==) Matched fbdev as autoconfigured driver 2
[ 34.706] (==) Assigned the driver to the xf86ConfigLayout
[ 34.706] (II) LoadModule: "intel"
[ 34.707] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 35.219] (II) Module intel: vendor="X.Org Foundation"
[ 35.219] compiled for 1.11.1.902, module version = 2.17.0
[ 35.219] Module class: X.Org Video Driver
[ 35.219] ABI class: X.Org Video Driver, version 11.0
[ 35.219] (II) LoadModule: "vesa"
[ 35.219] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 35.387] (II) Module vesa: vendor="X.Org Foundation"
[ 35.387] compiled for 1.11.0, module version = 2.3.0
[ 35.387] Module class: X.Org Video Driver
[ 35.387] ABI class: X.Org Video Driver, version 11.0
[ 35.387] (II) LoadModule: "fbdev"
[ 35.387] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 35.653] (II) Module fbdev: vendor="X.Org Foundation"
[ 35.653] compiled for 1.11.0, module version = 0.4.2
[ 35.653] ABI class: X.Org Video Driver, version 11.0
[ 35.653] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 35.654] (II) VESA: driver for VESA chipsets: vesa
[ 35.654] (II) FBDEV: driver for framebuffer: fbdev
[ 35.654] (++) using VT number 7

[ 35.783] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 35.783] (WW) Falling back to old probe method for vesa
[ 35.783] (WW) Falling back to old probe method for fbdev
[ 35.783] (II) Loading sub module "fbdevhw"
[ 35.783] (II) LoadModule: "fbdevhw"
[ 35.809] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 35.822] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 35.822] compiled for 1.11.2.902, module version = 0.0.2
[ 35.822] ABI class: X.Org Video Driver, version 11.0
[ 35.822] drmOpenDevice: node name is /dev/dri/card0
[ 35.823] drmOpenDevice: open result is 9, (OK)
[ 35.823] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 35.823] drmOpenDevice: node name is /dev/dri/card0
[ 35.823] drmOpenDevice: open result is 9, (OK)
[ 35.823] drmOpenByBusid: drmOpenMinor returns 9
[ 35.823] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 35.823] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 35.823] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 35.823] (==) intel(0): RGB weight 888
[ 35.823] (==) intel(0): Default visual is TrueColor
[ 35.823] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 35.823] (--) intel(0): Chipset: "GM45"
[ 35.823] (**) intel(0): Relaxed fencing enabled
[ 35.823] (**) intel(0): Wait on SwapBuffers? enabled
[ 35.823] (**) intel(0): Triple buffering? enabled
[ 35.823] (**) intel(0): Framebuffer tiled
[ 35.823] (**) intel(0): Pixmaps tiled
[ 35.823] (**) intel(0): 3D buffers tiled
[ 35.823] (**) intel(0): SwapBuffers wait enabled
[ 35.823] (==) intel(0): video overlay key set to 0x101fe
[ 35.823] (II) intel(0): Output LVDS1 has no monitor section
[ 35.924] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 35.956] (II) intel(0): Output VGA1 has no monitor section
[ 35.975] (II) intel(0): Output HDMI1 has no monitor section
[ 35.975] (II) intel(0): Output DP1 has no monitor section
[ 36.024] (II) intel(0): Output DP2 has no monitor section
[ 36.024] (II) intel(0): EDID for output LVDS1
[ 36.024] (II) intel(0): Manufacturer: AUO Model: 205c Serial#: 0
[ 36.024] (II) intel(0): Year: 2008 Week: 1
[ 36.024] (II) intel(0): EDID Version: 1.3
[ 36.024] (II) intel(0): Digital Display Input
[ 36.024] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
[ 36.024] (II) intel(0): Gamma: 2.20
[ 36.024] (II) intel(0): No DPMS capabilities specified
[ 36.024] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 36.024] (II) intel(0): First detailed timing is preferred mode
[ 36.024] (II) intel(0): redX: 0.584 redY: 0.333 greenX: 0.338 greenY: 0.571
[ 36.024] (II) intel(0): blueX: 0.158 blueY: 0.133 whiteX: 0.313 whiteY: 0.329
[ 36.024] (II) intel(0): Manufacturer's mask: 0
[ 36.024] (II) intel(0): Supported detailed timing:
[ 36.024] (II) intel(0): clock: 65.5 MHz Image Size: 256 x 144 mm
[ 36.024] (II) intel(0): h_active: 1366 h_sync: 1390 h_sync_end 1406 h_blank_end 1406 h_border: 0
[ 36.024] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 776 v_border: 0
[ 36.024] (II) intel(0): Unknown vendor-specific block f
[ 36.024] (II) intel(0): AUO
[ 36.024] (II) intel(0): B116XW02 V0
[ 36.024] (II) intel(0): EDID (in hex):
[ 36.024] (II) intel(0): 00ffffffffffff0006af5c2000000000
[ 36.024] (II) intel(0): 01120103801a0e780a99859555569228
[ 36.024] (II) intel(0): 22505400000001010101010101010101
[ 36.024] (II) intel(0): 01010101010196195628500008301810
[ 36.024] (II) intel(0): 24000090100000180000000f00000000
[ 36.024] (II) intel(0): 00000000000000000020000000fe0041
[ 36.024] (II) intel(0): 554f0a202020202020202020000000fe
[ 36.024] (II) intel(0): 004231313658573032205630200a00f8
[ 36.024] (II) intel(0): EDID vendor "AUO", prod id 8284
[ 36.024] (II) intel(0): Printing DDC gathered Modelines:
[ 36.024] (II) intel(0): Modeline "1366x768"x0.0 65.50 1366 1390 1406 1406 768 770 774 776 -hsync -vsync (46.6 kHz)
[ 36.025] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 36.025] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 36.025] (II) intel(0): Printing probed modes for output LVDS1
[ 36.025] (II) intel(0): Modeline "1366x768"x60.0 65.50 1366 1390 1406 1406 768 770 774 776 -hsync -vsync (46.6 kHz)
[ 36.025] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 36.025] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 36.025] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 36.025] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 36.025] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 36.025] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 36.056] (II) intel(0): EDID for output VGA1
[ 36.075] (II) intel(0): EDID for output HDMI1
[ 36.075] (II) intel(0): EDID for output DP1
[ 36.136] (II) intel(0): EDID for output DP2
[ 36.136] (II) intel(0): Output LVDS1 connected
[ 36.136] (II) intel(0): Output VGA1 disconnected
[ 36.136] (II) intel(0): Output HDMI1 disconnected
[ 36.136] (II) intel(0): Output DP1 disconnected
[ 36.136] (II) intel(0): Output DP2 disconnected
[ 36.136] (II) intel(0): Using exact sizes for initial modes
[ 36.136] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 36.136] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 36.136] (II) intel(0): Kernel page flipping support detected, enabling
[ 36.136] (**) intel(0): Display dimensions: (260, 140) mm
[ 36.136] (**) intel(0): DPI set to (133, 139)
[ 36.136] (II) Loading sub module "fb"
[ 36.136] (II) LoadModule: "fb"
[ 36.136] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.255] (II) Module fb: vendor="X.Org Foundation"
[ 36.255] compiled for 1.11.2.902, module version = 1.0.0
[ 36.255] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.255] (II) Loading sub module "dri2"
[ 36.255] (II) LoadModule: "dri2"
[ 36.255] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 36.255] (II) Module dri2: vendor="X.Org Foundation"
[ 36.255] compiled for 1.11.2.902, module version = 1.2.0
[ 36.255] ABI class: X.Org Server Extension, version 6.0
[ 36.255] (II) UnloadModule: "vesa"
[ 36.255] (II) Unloading vesa
[ 36.256] (II) UnloadModule: "fbdev"
[ 36.256] (II) Unloading fbdev
[ 36.256] (II) UnloadModule: "fbdevhw"
[ 36.256] (II) Unloading fbdevhw
[ 36.256] (==) Depth 24 pixmap format is 32 bpp
[ 36.256] (II) intel(0): [DRI2] Setup complete
[ 36.256] (II) intel(0): [DRI2] DRI driver: i965
[ 36.256] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 36.494] (II) UXA(0): Driver registered support for the following operations:
[ 36.494] (II) solid
[ 36.494] (II) copy
[ 36.494] (II) composite (RENDER acceleration)
[ 36.494] (II) put_image
[ 36.494] (II) get_image
[ 36.494] (==) intel(0): Backing store disabled
[ 36.494] (==) intel(0): Silken mouse enabled
[ 36.494] (II) intel(0): Initializing HW Cursor
[ 36.516] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 36.517] (==) intel(0): DPMS enabled
[ 36.517] (==) intel(0): Intel XvMC decoder enabled
[ 36.517] (II) intel(0): Set up textured video
[ 36.517] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 36.518] (II) intel(0): direct rendering: DRI2 Enabled
[ 36.518] (==) intel(0): hotplug detection: "enabled"
[ 36.518] (--) RandR disabled
[ 36.518] (II) Initializing built-in extension Generic Event Extension
[ 36.518] (II) Initializing built-in extension SHAPE
[ 36.518] (II) Initializing built-in extension MIT-SHM
[ 36.518] (II) Initializing built-in extension XInputExtension
[ 36.518] (II) Initializing built-in extension XTEST
[ 36.518] (II) Initializing built-in extension BIG-REQUESTS
[ 36.518] (II) Initializing built-in extension SYNC
[ 36.518] (II) Initializing built-in extension XKEYBOARD
[ 36.518] (II) Initializing built-in extension XC-MISC
[ 36.518] (II) Initializing built-in extension SECURITY
[ 36.518] (II) Initializing built-in extension XINERAMA
[ 36.518] (II) Initializing built-in extension XFIXES
[ 36.518] (II) Initializing built-in extension RENDER
[ 36.518] (II) Initializing built-in extension RANDR
[ 36.518] (II) Initializing built-in extension COMPOSITE
[ 36.518] (II) Initializing built-in extension DAMAGE
[ 36.518] (II) SELinux: Disabled on system
[ 37.021] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 37.021] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 37.021] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 37.021] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 37.021] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 37.022] (II) AIGLX: Loaded and initialized i965
[ 37.022] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 37.023] (II) intel(0): Setting screen physical size to 361 x 203
[ 40.227] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 40.227] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 40.227] (II) LoadModule: "evdev"
[ 40.227] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.240] (II) Module evdev: vendor="X.Org Foundation"
[ 40.240] compiled for 1.11.0, module version = 2.6.0
[ 40.241] Module class: X.Org XInput Driver
[ 40.241] ABI class: X.Org XInput driver, version 13.0
[ 40.241] (II) Using input driver 'evdev' for 'Power Button'
[ 40.241] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.241] (**) Power Button: always reports core events
[ 40.241] (**) Power Button: Device: "/dev/input/event5"
[ 40.241] (--) Power Button: Found keys
[ 40.241] (II) Power Button: Configuring as keyboard
[ 40.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 40.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 40.241] (**) Option "xkb_rules" "evdev"
[ 40.241] (**) Option "xkb_model" "pc105"
[ 40.241] (**) Option "xkb_layout" "us"
[ 40.242] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 40.242] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 40.242] (II) Using input driver 'evdev' for 'Video Bus'
[ 40.242] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.242] (**) Video Bus: always reports core events
[ 40.242] (**) Video Bus: Device: "/dev/input/event9"
[ 40.242] (--) Video Bus: Found keys
[ 40.242] (II) Video Bus: Configuring as keyboard
[ 40.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9"
[ 40.242] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 40.242] (**) Option "xkb_rules" "evdev"
[ 40.242] (**) Option "xkb_model" "pc105"
[ 40.242] (**) Option "xkb_layout" "us"
[ 40.243] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 40.243] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 40.243] (II) Using input driver 'evdev' for 'Power Button'
[ 40.243] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.243] (**) Power Button: always reports core events
[ 40.243] (**) Power Button: Device: "/dev/input/event2"
[ 40.243] (--) Power Button: Found keys
[ 40.243] (II) Power Button: Configuring as keyboard
[ 40.243] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input2/event2"
[ 40.243] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 40.243] (**) Option "xkb_rules" "evdev"
[ 40.243] (**) Option "xkb_model" "pc105"
[ 40.243] (**) Option "xkb_layout" "us"
[ 40.244] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 40.244] (II) No input driver/identifier specified (ignoring)
[ 40.245] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 40.245] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 40.245] (II) Using input driver 'evdev' for 'Sleep Button'
[ 40.245] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.245] (**) Sleep Button: always reports core events
[ 40.245] (**) Sleep Button: Device: "/dev/input/event4"
[ 40.245] (--) Sleep Button: Found keys
[ 40.245] (II) Sleep Button: Configuring as keyboard
[ 40.245] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input4/event4"
[ 40.245] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 40.245] (**) Option "xkb_rules" "evdev"
[ 40.245] (**) Option "xkb_model" "pc105"
[ 40.245] (**) Option "xkb_layout" "us"
[ 40.246] (II) config/udev: Adding input device CNF9011 (/dev/input/event8)
[ 40.246] (**) CNF9011: Applying InputClass "evdev keyboard catchall"
[ 40.246] (II) Using input driver 'evdev' for 'CNF9011'
[ 40.246] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.246] (**) CNF9011: always reports core events
[ 40.246] (**) CNF9011: Device: "/dev/input/event8"
[ 40.246] (--) CNF9011: Found keys
[ 40.246] (II) CNF9011: Configuring as keyboard
[ 40.246] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8/event8"
[ 40.246] (II) XINPUT: Adding extended input device "CNF9011" (type: KEYBOARD, id 10)
[ 40.246] (**) Option "xkb_rules" "evdev"
[ 40.246] (**) Option "xkb_model" "pc105"
[ 40.246] (**) Option "xkb_layout" "us"
[ 40.247] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 40.247] (II) No input driver/identifier specified (ignoring)
[ 40.248] (II) config/udev: Adding input device HDA Intel HDMI/DP (/dev/input/event11)
[ 40.248] (II) No input driver/identifier specified (ignoring)
[ 40.248] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
[ 40.248] (II) No input driver/identifier specified (ignoring)
[ 40.248] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[ 40.249] (II) No input driver/identifier specified (ignoring)
[ 40.249] (II) config/udev: Adding input device Microsoft Compact Optical Mouse 500 (/dev/input/event1)
[ 40.249] (**) Microsoft Compact Optical Mouse 500: Applying InputClass "evdev pointer catchall"
[ 40.249] (II) Using input driver 'evdev' for 'Microsoft Compact Optical Mouse 500'
[ 40.249] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.249] (**) Microsoft Compact Optical Mouse 500: always reports core events
[ 40.249] (**) Microsoft Compact Optical Mouse 500: Device: "/dev/input/event1"
[ 40.249] (--) Microsoft Compact Optical Mouse 500: Found 3 mouse buttons
[ 40.249] (--) Microsoft Compact Optical Mouse 500: Found scroll wheel(s)
[ 40.249] (--) Microsoft Compact Optical Mouse 500: Found relative axes
[ 40.249] (--) Microsoft Compact Optical Mouse 500: Found x and y relative axes
[ 40.249] (II) Microsoft Compact Optical Mouse 500: Configuring as mouse
[ 40.249] (II) Microsoft Compact Optical Mouse 500: Adding scrollwheel support
[ 40.249] (**) Microsoft Compact Optical Mouse 500: YAxisMapping: buttons 4 and 5
[ 40.249] (**) Microsoft Compact Optical Mouse 500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 40.250] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input1/event1"
[ 40.250] (II) XINPUT: Adding extended input device "Microsoft Compact Optical Mouse 500" (type: MOUSE, id 11)
[ 40.250] (II) Microsoft Compact Optical Mouse 500: initialized for relative axes.
[ 40.250] (**) Microsoft Compact Optical Mouse 500: (accel) keeping acceleration scheme 1
[ 40.250] (**) Microsoft Compact Optical Mouse 500: (accel) acceleration profile 0
[ 40.250] (**) Microsoft Compact Optical Mouse 500: (accel) acceleration factor: 2.000
[ 40.250] (**) Microsoft Compact Optical Mouse 500: (accel) acceleration threshold: 4
[ 40.250] (II) config/udev: Adding input device Microsoft Compact Optical Mouse 500 (/dev/input/mouse0)
[ 40.250] (II) No input driver/identifier specified (ignoring)
[ 40.251] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 40.251] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 40.251] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 40.251] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.251] (**) AT Translated Set 2 keyboard: always reports core events
[ 40.251] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 40.251] (--) AT Translated Set 2 keyboard: Found keys
[ 40.251] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 40.251] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 40.251] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 40.251] (**) Option "xkb_rules" "evdev"
[ 40.251] (**) Option "xkb_model" "pc105"
[ 40.251] (**) Option "xkb_layout" "us"
[ 40.252] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 40.252] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 40.252] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 40.252] (II) LoadModule: "synaptics"
[ 40.253] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 40.299] (II) Module synaptics: vendor="X.Org Foundation"
[ 40.299] compiled for 1.11.0, module version = 1.4.1
[ 40.299] Module class: X.Org XInput Driver
[ 40.299] ABI class: X.Org XInput driver, version 13.0
[ 40.299] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 40.299] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 40.299] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 40.299] (**) Option "Device" "/dev/input/event7"
[ 40.300] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5612
[ 40.300] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4618
[ 40.300] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 40.300] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 40.300] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 40.304] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 40.304] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 40.308] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 40.308] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 40.308] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 40.308] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 40.308] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 40.308] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 40.308] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 40.308] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 40.308] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 40.308] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 40.309] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 40.309] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 40.309] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 40.309] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 40.309] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 40.309] (**) Option "Device" "/dev/input/mouse1"
[ 40.309] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range. defaulting to 1615 - 5685
[ 40.309] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range. defaulting to 1729 - 4171
[ 40.309] (--) SynPS/2 Synaptics TouchPad: invalid pressure range. defaulting to 0 - 256
[ 40.309] (--) SynPS/2 Synaptics TouchPad: invalid finger width range. defaulting to 0 - 16
[ 40.329] (EE) Query no Synaptics: 6003C8
[ 40.329] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 40.329] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 40.329] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[ 40.329] (II) UnloadModule: "synaptics"
[ 40.329] (II) Unloading synaptics
[ 40.330] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 40.330] (II) No input driver/identifier specified (ignoring)
[ 40.331] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event14)
[ 40.331] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 40.331] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 40.331] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.331] (**) ACPI Virtual Keyboard Device: always reports core events
[ 40.331] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event14"
[ 40.331] (--) ACPI Virtual Keyboard Device: Found keys
[ 40.331] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 40.331] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event14"
[ 40.331] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 14)
[ 40.331] (**) Option "xkb_rules" "evdev"
[ 40.331] (**) Option "xkb_model" "pc105"
[ 40.331] (**) Option "xkb_layout" "us"
[ 40.365] (II) intel(0): EDID vendor "AUO", prod id 8284
[ 40.365] (II) intel(0): Printing DDC gathered Modelines:
[ 40.365] (II) intel(0): Modeline "1366x768"x0.0 65.50 1366 1390 1406 1406 768 770 774 776 -hsync -vsync (46.6 kHz)
[ 54.883] (II) intel(0): EDID vendor "AUO", prod id 8284
[ 54.883] (II) intel(0): Printing DDC gathered Modelines:
[ 54.883] (II) intel(0): Modeline "1366x768"x0.0 65.50 1366 1390 1406 1406 768 770 774 776 -hsync -vsync (46.6 kHz)
[ 54.986] (II) intel(0): EDID vendor "AUO", prod id 8284
[ 54.986] (II) intel(0): Printing DDC gathered Modelines:
[ 54.986] (II) intel(0): Modeline "1366x768"x0.0 65.50 1366 1390 1406 1406 768 770 774 776 -hsync -vsync (46.6 kHz)
[ 55.086] (II) intel(0): EDID vendor "AUO", prod id 8284
[ 55.086] (II) intel(0): Printing DDC gathered Modelines:
[ 55.086] (II) intel(0): Modeline "1366x768"x0.0 65.50 1366 1390 1406 1406 768 770 774 776 -hsync -vsync (46.6 kHz)
[ 55.186] (II) intel(0): EDID vendor "AUO", prod id 8284
[ 55.186] (II) intel(0): Printing DDC gathered Modelines:
[ 55.186] (II) intel(0): Modeline "1366x768"x0.0 65.50 1366 1390 1406 1406 768 770 774 776 -hsync -vsync (46.6 kHz)

udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=11143696

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
E: DMI_VENDOR=Packard Bell
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=11166451
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: KEY=3e000b 0 0 0 0 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14703478

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9
E: DMI_VENDOR=Packard Bell
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14706975
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input2
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=11163087

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input2/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input2/event2
E: DMI_VENDOR=Packard Bell
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=11166433
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input3
E: EV=21
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: UDEV_LOG=3
E: USEC_INITIALIZED=11135829

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input3/event3
N: input/event3
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input3/event3
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=11146939

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input4
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=11123300

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input4/event4
N: input/event4
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input4/event4
E: DMI_VENDOR=Packard Bell
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=11166064
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
E: EV=3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=CNF9011
E: ID_MODEL_ENC=CNF9011
E: ID_MODEL_ID=b175
E: ID_PATH=pci-0000:00:1a.7-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_1a_7-usb-0_2_1_0
E: ID_REVISION=1357
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._CNF9011_SN 0001
E: ID_SERIAL_SHORT=SN0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chiconyx20Electronicsx20Co.x2cx20Ltd .
E: ID_VENDOR_ID=04f2
E: KEY=100000 0 0 0 0 0 0
E: MODALIAS=input:b0003v04F2pB175e1357-e0,1,kD4,ramlsfw
E: NAME="CNF9011"
E: PHYS="usb-0000:00:1a.7-2/button"
E: PRODUCT=3/4f2/b175/1357
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=13444078

P: /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8/event8
N: input/event8
S: input/by-id/usb-Chicony_Electronics_Co.__Ltd._CNF9011_SN0001-event-if00
S: input/by-path/pci-0000:00:1a.7-usb-0:2:1.0-event
E: DEVLINKS=/dev/input/by-id/usb-Chicony_Electronics_Co.__Ltd._CNF9011_SN0001-event-if00 /dev/input/by-path/pci-0000:00:1a.7-usb-0:2:1.0-event
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8/event8
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=CNF9011
E: ID_MODEL_ENC=CNF9011
E: ID_MODEL_ID=b175
E: ID_PATH=pci-0000:00:1a.7-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_1a_7-usb-0_2_1_0
E: ID_REVISION=1357
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._CNF9011_SN 0001
E: ID_SERIAL_SHORT=SN0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chiconyx20Electronicsx20Co.x2cx20Ltd .
E: ID_VENDOR_ID=04f2
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=13447938
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:1b.0/input/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input10
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0269e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/269/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14931321

P: /devices/pci0000:00/0000:00:1b.0/input/input10/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input10/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14942614

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw8,
E: NAME="HDA Intel HDMI/DP"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=100
E: UDEV_LOG=3
E: USEC_INITIALIZED=14933153

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14940034

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: UDEV_LOG=3
E: USEC_INITIALIZED=14934699

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14938908

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: UDEV_LOG=3
E: USEC_INITIALIZED=14933955

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14941831

P: /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input1
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input1
E: EV=17
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Compact_Optical_Mouse_500
E: ID_MODEL_ENC=Compactx20Opticalx20Mousex20500
E: ID_MODEL_ID=0737
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_0
E: ID_REVISION=0104
E: ID_SERIAL=Microsoft_Compact_Optical_Mouse_500
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoftx20
E: ID_VENDOR_ID=045e
E: KEY=70000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0003v045Ep0737e0111-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="Microsoft Compact Optical Mouse 500"
E: PHYS="usb-0000:00:1d.0-1/input0"
E: PRODUCT=3/45e/737/111
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ=""
E: USEC_INITIALIZED=12047073

P: /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input1/event1
N: input/event1
S: input/by-id/usb-Microsoft_Compact_Optical_Mouse_500-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Compact_Optical_Mouse_500-event-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input1/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Compact_Optical_Mouse_500
E: ID_MODEL_ENC=Compactx20Opticalx20Mousex20500
E: ID_MODEL_ID=0737
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_0
E: ID_REVISION=0104
E: ID_SERIAL=Microsoft_Compact_Optical_Mouse_500
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoftx20
E: ID_VENDOR_ID=045e
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=12052261

P: /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input1/mouse0
N: input/mouse0
S: input/by-id/usb-Microsoft_Compact_Optical_Mouse_500-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Compact_Optical_Mouse_500-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input1/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Compact_Optical_Mouse_500
E: ID_MODEL_ENC=Compactx20Opticalx20Mousex20500
E: ID_MODEL_ID=0737
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_0
E: ID_REVISION=0104
E: ID_SERIAL=Microsoft_Compact_Optical_Mouse_500
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoftx20
E: ID_VENDOR_ID=045e
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=12050806

P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D, 7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD ,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=10768853

P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: DMI_VENDOR=Packard Bell
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=11165573
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/platform/i8042/serio1/input/input7
E: ABS=2608000 11000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input7
E: EV=b
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=6420 0 30000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35, 36,39,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=9
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=12029145

P: /devices/platform/i8042/serio1/input/input7/event7
N: input/event7
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/platform/i8042/serio1/input/input7/event7
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=13037113

P: /devices/platform/i8042/serio1/input/input7/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/input/input7/mouse1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=13037876

P: /devices/platform/pcspkr/input/input6
E: DEVPATH=/devices/platform/pcspkr/input/input6
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=11338752

P: /devices/platform/pcspkr/input/input6/event6
N: input/event6
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/platform/pcspkr/input/input6/event6
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=11341840

P: /devices/virtual/input/input14
E: DEVPATH=/devices/virtual/input/input14
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: KEY=ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe
E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F ,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,9 0,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0, A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1 ,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C 2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2, D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3 ,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F 4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw
E: NAME="ACPI Virtual Keyboard Device"
E: PRODUCT=3/0/0/4
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=22414017

P: /devices/virtual/input/input14/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/virtual/input/input14/event14
E: DMI_VENDOR=Packard Bell
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=22417473
E: XKBLAYOUT=us
E: XKBMODEL=pc105


DRM Information from dmesg:
---------------------------
[ 4.652548] Linux agpgart interface v0.103
[ 4.658092] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 4.663744] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.676521] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 4.682297] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 13.317956] [drm] Initialized drm 1.1.0 20060810
[ 13.531045] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.531048] [drm] Driver supports precise vblank timestamp query.
[ 14.015048] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 14.018054] fbcon: inteldrmfb (fb0) is primary device
[ 14.018486] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
[ 14.019954] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[ 14.400232] fb0: inteldrmfb frame buffer device
[ 14.400235] drm: registered panic notifier
[ 14.707868] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0


Compilation finished at Thu Dec 22 14:59:52
 
Old 12-22-2011, 06:36 PM
Jonathan Nieder
 
Default Bug#627372: Console turns black during boot.

Alan Zimmerman wrote:

> I reinstalled the video-intel package.
>
> When the console turns black, the machine is still usable. Booting in
> recovery mode makes no difference.

I see. Removing the intel driver means removing the file in
/etc/modprobe.d that enables kernel mode setting (see NEWS.Debian.gz),
which works around the bug.

> Attached are the dmesg logs, and the bug script output, after booting
> normally with the driver installed.

Here's the relevant snippet:

> fbcon: inteldrmfb (fb0) is primary device
> [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
> render error detected, EIR: 0x00000010
> IPEIR: 0x00000000
> IPEHR: 0x00000000
> INSTDONE: 0xfffffffe
> INSTPS: 0x00000000
> INSTDONE1: 0xffffffff
> ACTHD: 0x00000000
> page table error
> PGTBL_ER: 0x00000001
> [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking

Please also provide the content of the /debug/dri/0/i915_error_state
file.

Then we can take this upstream, following instructions from [1].

Thanks for a clear report,
Jonathan

[1] http://intellinuxgraphics.org/how_to_report_bug.html



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111222193647.GB8650@elie.Belkin">http://lists.debian.org/20111222193647.GB8650@elie.Belkin
 
Old 12-23-2011, 08:56 PM
Jonathan Nieder
 
Default Bug#627372: Console turns black during boot.

found 627372 linux-2.6/3.1.5-1
quit

Alan Zimmerman wrote:

> I actually had that in my original mail, then figured that since I was
> removing the video-intel driver and it sorted it, the issue was not
> necessarily relevant.
>
> When I have a moment I will generate the upstream bug report.

Thanks. We'll want the bug number so we can track it.

>> Alan Zimmerman wrote:

>>> [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state

BTW, the way to get this file is

mount -t debugfs debugfs /sys/kernel/debug
cat /sys/kernel/debug/dri/0/i915_error_state >error_event.log

Good luck,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111223215640.GD21769@elie.Belkin">http://lists.debian.org/20111223215640.GD21769@elie.Belkin
 
Old 12-26-2011, 06:48 PM
AlanKim Zimmerman
 
Default Bug#627372: Console turns black during boot.

The bug has been reported as https://bugs.freedesktop.org/show_bug.cgi?id=44156

Alan

On Thu, Dec 22, 2011 at 9:36 PM, Jonathan Nieder <jrnieder@gmail.com> wrote:


Alan Zimmerman wrote:



> I reinstalled the video-intel package.

>

> When the console turns black, the machine is still usable. Booting in

> recovery mode makes no difference.



I see. *Removing the intel driver means removing the file in

/etc/modprobe.d that enables kernel mode setting (see NEWS.Debian.gz),

which works around the bug.



> Attached are the dmesg logs, and the bug script output, after booting

> normally with the driver installed.



Here's the relevant snippet:



> fbcon: inteldrmfb (fb0) is primary device

> [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state

> render error detected, EIR: 0x00000010

> * IPEIR: 0x00000000

> * IPEHR: 0x00000000

> * INSTDONE: 0xfffffffe

> * INSTPS: 0x00000000

> * INSTDONE1: 0xffffffff

> * ACTHD: 0x00000000

> page table error

> * PGTBL_ER: 0x00000001

> [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking



Please also provide the content of the /debug/dri/0/i915_error_state

file.



Then we can take this upstream, following instructions from [1].



Thanks for a clear report,

Jonathan



[1] http://intellinuxgraphics.org/how_to_report_bug.html
 
Old 01-01-2012, 07:34 AM
Jonathan Nieder
 
Default Bug#627372: Console turns black during boot.

Hi,

AlanKim Zimmerman wrote:

> BTW, I hope there is enough detail there. Seems the i915 debug info ended
> up empty, and the detailed dmesg seems to have junk.
>
> Not sure I have the will right now to reinstall the driver, shut down and
> reboot in the flaky mode.
>
> I will if required, though. Let me know.

Unfortunately the upstream bug seems to be stalled. Do you have any
idea what happened to the error state? E.g., was there any message
when trying to mount debugfs or trying to capture the error state with
"cat"?

Testing should be as simple as booting with the i915.modeset=1
parameter on the kernel command line (choose the kernel in grub, hit
"e" for detailed options, move to the line starting with "linux", and
you can add parameters to the end of the line and hit ctrl-x to boot)
--- no need to install the intel X driver again. Does 3.2-rc7 from
experimental show the same symptoms?



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120101083455.GE2402@elie.hsd1.il.comcast.net">ht tp://lists.debian.org/20120101083455.GE2402@elie.hsd1.il.comcast.net
 
Old 01-01-2012, 10:30 AM
AlanKim Zimmerman
 
Default Bug#627372: Console turns black during boot.

Hi

I reinstalled the driver, and booted with i915.modeset=1 drm.debug=14 log_buf_len=16M

Attached is the dmesg output.
Note: I attached an external screen, which shows up after around >30 secs in the dmesg.



The i915_error_state contents is
--------------------
no error state collected
------------------------

I am about to install 3.2-rc7 and try that in the same config.

Alan



On Sun, Jan 1, 2012 at 10:34 AM, Jonathan Nieder <jrnieder@gmail.com> wrote:


Hi,



AlanKim Zimmerman wrote:



> BTW, I hope there is enough detail there. Seems the i915 debug info ended

> up empty, and the detailed dmesg seems to have junk.

>

> Not sure I have the will right now to reinstall the driver, shut down and

> reboot in the flaky mode.

>

> I will if required, though. Let me know.



Unfortunately the upstream bug seems to be stalled. *Do you have any

idea what happened to the error state? *E.g., was there any message

when trying to mount debugfs or trying to capture the error state with

"cat"?



Testing should be as simple as booting with the i915.modeset=1

parameter on the kernel command line (choose the kernel in grub, hit

"e" for detailed options, move to the line starting with "linux", and

you can add parameters to the end of the line and hit ctrl-x to boot)

--- no need to install the intel X driver again. *Does 3.2-rc7 from

experimental show the same symptoms?



[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1-686-pae (Debian 3.1.5-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Sun Dec 11 20:40:16 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b9e74000 (usable)
[ 0.000000] BIOS-e820: 00000000b9e74000 - 00000000b9ebf000 (reserved)
[ 0.000000] BIOS-e820: 00000000b9ebf000 - 00000000b9f83000 (usable)
[ 0.000000] BIOS-e820: 00000000b9f83000 - 00000000b9fbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b9fbf000 - 00000000b9fe3000 (usable)
[ 0.000000] BIOS-e820: 00000000b9fe3000 - 00000000b9ff6000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b9ff6000 - 00000000b9ffe000 (usable)
[ 0.000000] BIOS-e820: 00000000b9ffe000 - 00000000b9fff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b9fff000 - 00000000ba000000 (usable)
[ 0.000000] BIOS-e820: 00000000ba000000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Packard Bell ENBFXS/ENBFXS, BIOS V1.07 12/2/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BA000000 mask FFE000000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] log_buf_len: 16777216
[ 0.000000] early log buf free: 127427(97%)
[ 0.000000] RAMDISK: 36ccc000 - 3765e000
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT b9ffe120 0007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP b9ff5000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT b9fe9000 07D74 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS b9f8f000 00040
[ 0.000000] ACPI: HPET b9ff4000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC b9ff3000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG b9ff2000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! b9ff1000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC b9fe8000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT b9fe7000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe6000 002E2 (v01 ACRSYS ACRPRDCT 00001000 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe5000 00C51 (v01 ACRSYS ACRPRDCT 00001000 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe4000 006A1 (v01 ACRSYS ACRPRDCT 00001000 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe3000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4230MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b9e74
[ 0.000000] 0: 0x000b9ebf -> 0x000b9f83
[ 0.000000] 0: 0x000b9fbf -> 0x000b9fe3
[ 0.000000] 0: 0x000b9ff6 -> 0x000b9ffe
[ 0.000000] 0: 0x000b9fff -> 0x000ba000
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1023732
[ 0.000000] free_area_init_node: node 0, pgdat c1438840, node_mem_map f34cc200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8461 pages used for memmap
[ 0.000000] HighMem zone: 787546 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f3200000 s31744 r0 d21504 u524288
[ 0.000000] pcpu-alloc: s31744 r0 d21504 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1013491
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=7910f557-5c71-42d1-bfd8-4ff17af1d3fd ro i915.modeset=1 drm.debug=14 log_buf_len=16M
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000379fe:00140000)
[ 0.000000] Memory: 4021300k/5242880k available (2766k kernel code, 73628k reserved, 1585k data, 408k init, 3184028k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1440000 - 0xc14a6000 ( 408 kB)
[ 0.000000] .data : 0xc12b39ac - 0xc143ff00 (1585 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12b39ac (2766 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f2c0a000 soft=f2c0c000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1296.787 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.57 BogoMIPS (lpj=5187148)
[ 0.004134] pid_max: default: 32768 minimum: 301
[ 0.004266] Security Framework initialized
[ 0.004369] Mount-cache hash table entries: 512
[ 0.005040] Initializing cgroup subsys cpuacct
[ 0.005167] Initializing cgroup subsys memory
[ 0.005255] Initializing cgroup subsys devices
[ 0.005318] Initializing cgroup subsys freezer
[ 0.005382] Initializing cgroup subsys net_cls
[ 0.005446] Initializing cgroup subsys blkio
[ 0.005554] CPU: Physical Processor ID: 0
[ 0.005616] CPU: Processor Core ID: 0
[ 0.008008] mce: CPU supports 6 MCE banks
[ 0.008079] CPU0: Thermal monitoring enabled (TM2)
[ 0.008145] using mwait in idle threads.
[ 0.008866] ACPI: Core revision 20110623
[ 0.024068] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067644] CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
[ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.068003] ... version: 2
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] CPU 1 irqstacks, hard=f2cf4000 soft=f2cf6000
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.160044] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160213] Brought up 2 CPUs
[ 0.160276] Total of 2 processors activated (5187.05 BogoMIPS).
[ 0.162490] devtmpfs: initialized
[ 0.162490] PM: Registering ACPI NVS region at b9f83000 (245760 bytes)
[ 0.162490] print_constraints: dummy:
[ 0.162490] NET: Registered protocol family 16
[ 0.164018] ACPI: bus type pci registered
[ 0.164333] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.164420] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.164487] PCI: Using MMCONFIG for extended config space
[ 0.164551] PCI: Using configuration type 1 for base access
[ 0.165210] bio: create slab <bio-0> at 0
[ 0.165210] ACPI: Added _OSI(Module Device)
[ 0.165210] ACPI: Added _OSI(Processor Device)
[ 0.165210] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.165210] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.168992] ACPI: EC: Look up EC in DSDT
[ 0.171930] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.175141] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.175854] ACPI: SSDT b9e7dc98 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.176714] ACPI: Dynamic OEM Table Load:
[ 0.176858] ACPI: SSDT (null) 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.177270] ACPI: SSDT b9e7b598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.178105] ACPI: Dynamic OEM Table Load:
[ 0.178249] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.200498] ACPI: SSDT b9e7ce18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.201395] ACPI: Dynamic OEM Table Load:
[ 0.201539] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.212202] ACPI: SSDT b9e7df18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.213062] ACPI: Dynamic OEM Table Load:
[ 0.213206] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.240118] ACPI: Interpreter enabled
[ 0.240187] ACPI: (supports S0 S3 S4 S5)
[ 0.240449] ACPI: Using IOAPIC for interrupt routing
[ 0.448399] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.448802] ACPI: No dock devices found.
[ 0.448865] HEST: Table not found.
[ 0.448930] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.449558] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.450679] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.450748] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.450817] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.450902] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.450999] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.451033] DMAR: Forcing write-buffer flush capability
[ 0.451098] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.451194] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.451214] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.451228] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.451238] pci 0000:00:02.0: reg 20: [io 0x50d0-0x50d7]
[ 0.451286] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.451304] pci 0000:00:02.1: reg 10: [mem 0xd3400000-0xd34fffff 64bit]
[ 0.451408] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.451470] pci 0000:00:1a.0: reg 20: [io 0x50a0-0x50bf]
[ 0.451554] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.451587] pci 0000:00:1a.7: reg 10: [mem 0xd6705c00-0xd6705fff]
[ 0.451698] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.451705] pci 0000:00:1a.7: PME# disabled
[ 0.451744] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.451769] pci 0000:00:1b.0: reg 10: [mem 0xd6700000-0xd6703fff 64bit]
[ 0.451855] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.451862] pci 0000:00:1b.0: PME# disabled
[ 0.451895] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.451984] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.451990] pci 0000:00:1c.0: PME# disabled
[ 0.452037] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.452126] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.452132] pci 0000:00:1c.1: PME# disabled
[ 0.452168] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[ 0.452258] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.452265] pci 0000:00:1c.2: PME# disabled
[ 0.452311] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.452395] pci 0000:00:1d.0: reg 20: [io 0x5080-0x509f]
[ 0.452476] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.452558] pci 0000:00:1d.1: reg 20: [io 0x5060-0x507f]
[ 0.452634] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.452716] pci 0000:00:1d.2: reg 20: [io 0x5040-0x505f]
[ 0.452809] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.452841] pci 0000:00:1d.7: reg 10: [mem 0xd6705800-0xd6705bff]
[ 0.452952] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.452959] pci 0000:00:1d.7: PME# disabled
[ 0.452990] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.453078] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.453241] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.453272] pci 0000:00:1f.2: reg 10: [io 0x50c8-0x50cf]
[ 0.453286] pci 0000:00:1f.2: reg 14: [io 0x50dc-0x50df]
[ 0.453299] pci 0000:00:1f.2: reg 18: [io 0x50c0-0x50c7]
[ 0.453313] pci 0000:00:1f.2: reg 1c: [io 0x50d8-0x50db]
[ 0.453326] pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
[ 0.453339] pci 0000:00:1f.2: reg 24: [mem 0xd6705000-0xd67057ff]
[ 0.453393] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.453399] pci 0000:00:1f.2: PME# disabled
[ 0.453427] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.453452] pci 0000:00:1f.3: reg 10: [mem 0xd6706000-0xd67060ff 64bit]
[ 0.453489] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
[ 0.453544] pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180
[ 0.453580] pci 0000:00:1f.6: reg 10: [mem 0xd6704000-0xd6704fff 64bit]
[ 0.453745] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.453812] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.453820] pci 0000:00:1c.0: bridge window [mem 0xd5700000-0xd66fffff]
[ 0.453829] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.453928] pci 0000:04:00.0: [8086:4232] type 0 class 0x000280
[ 0.453971] pci 0000:04:00.0: reg 10: [mem 0xd4600000-0xd4601fff 64bit]
[ 0.454131] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.454141] pci 0000:04:00.0: PME# disabled
[ 0.460055] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.460124] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.460131] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd56fffff]
[ 0.460141] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.460311] pci 0000:05:00.0: [1969:1063] type 0 class 0x000200
[ 0.460416] pci 0000:05:00.0: reg 10: [mem 0xd3500000-0xd353ffff 64bit]
[ 0.460459] pci 0000:05:00.0: reg 18: [io 0x1000-0x107f]
[ 0.460775] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.460802] pci 0000:05:00.0: PME# disabled
[ 0.468086] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.468154] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.468162] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd45fffff]
[ 0.468172] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.468264] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.468344] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.468349] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.468353] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.468358] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.468387] pci_bus 0000:00: on NUMA node 0
[ 0.468393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.468874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.468971] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.469065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.469187] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.469255] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.469339] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.478209] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.478768] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.479327] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.479884] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.480420] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.481072] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.481718] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.482274] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.482852] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.482852] vgaarb: loaded
[ 0.482852] vgaarb: bridge control possible 0000:00:02.0
[ 0.482852] PCI: Using ACPI for IRQ routing
[ 0.485913] PCI: pci_cache_line_size set to 64 bytes
[ 0.486067] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.486071] reserve RAM buffer: 00000000b9e74000 - 00000000bbffffff
[ 0.486078] reserve RAM buffer: 00000000b9f83000 - 00000000bbffffff
[ 0.486084] reserve RAM buffer: 00000000b9fe3000 - 00000000bbffffff
[ 0.486089] reserve RAM buffer: 00000000b9ffe000 - 00000000bbffffff
[ 0.486094] reserve RAM buffer: 00000000ba000000 - 00000000bbffffff
[ 0.486276] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.486351] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.486617] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.492054] Switching to clocksource hpet
[ 0.494961] pnp: PnP ACPI init
[ 0.495038] ACPI: bus type pnp registered
[ 0.495643] pnp 00:00: [bus 00-ff]
[ 0.495648] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.495652] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.495656] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.495660] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.495664] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.495668] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.495674] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.495678] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.495682] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.495686] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.495691] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.495695] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.495699] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.495703] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.495707] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.495711] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.495715] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.495719] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.495723] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.495816] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.495816] Switched to NOHz mode on CPU #0
[ 0.495904] Switched to NOHz mode on CPU #1
[ 0.596242] pnp 00:01: [io 0x002e-0x002f]
[ 0.596246] pnp 00:01: [io 0x004e-0x004f]
[ 0.596249] pnp 00:01: [io 0x164e-0x164f]
[ 0.596253] pnp 00:01: [io 0x0061]
[ 0.596256] pnp 00:01: [io 0x0070]
[ 0.596259] pnp 00:01: [io 0x0080]
[ 0.596262] pnp 00:01: [io 0x0092]
[ 0.596265] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.596268] pnp 00:01: [io 0x0063]
[ 0.596271] pnp 00:01: [io 0x0065]
[ 0.596274] pnp 00:01: [io 0x0067]
[ 0.596277] pnp 00:01: [io 0x0600-0x060f]
[ 0.596281] pnp 00:01: [io 0x0610]
[ 0.596284] pnp 00:01: [io 0x0800-0x080f]
[ 0.596287] pnp 00:01: [io 0x0810-0x0817]
[ 0.596290] pnp 00:01: [io 0x0820-0x0823]
[ 0.596293] pnp 00:01: [io 0x0400-0x047f]
[ 0.596297] pnp 00:01: [io 0x0500-0x057f]
[ 0.596300] pnp 00:01: [io 0x0068]
[ 0.596303] pnp 00:01: [io 0x006c]
[ 0.596306] pnp 00:01: [io 0xff2c-0xff2f]
[ 0.596310] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.596313] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.596317] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.596320] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.596324] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.596327] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.596331] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[ 0.596334] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.596371] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x2fff]
[ 0.596554] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.596622] system 00:01: [io 0x0610] has been reserved
[ 0.596688] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.596756] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.596824] system 00:01: [io 0x0820-0x0823] has been reserved
[ 0.596891] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.596959] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.597027] system 00:01: [io 0xff2c-0xff2f] has been reserved
[ 0.597095] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.597164] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.597233] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.597302] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.597370] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.597439] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.597509] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.597578] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.597647] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.597665] pnp 00:02: [io 0x0000-0x001f]
[ 0.597671] pnp 00:02: [io 0x0081-0x0091]
[ 0.597674] pnp 00:02: [io 0x0093-0x009f]
[ 0.597677] pnp 00:02: [io 0x00c0-0x00df]
[ 0.597681] pnp 00:02: [dma 4]
[ 0.597733] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.597772] pnp 00:03: [io 0x0070-0x0077]
[ 0.597825] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.597935] pnp 00:04: [irq 0 disabled]
[ 0.597946] pnp 00:04: [irq 8]
[ 0.597949] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.598004] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.598023] pnp 00:05: [io 0x00f0]
[ 0.598031] pnp 00:05: [irq 13]
[ 0.598086] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.598104] pnp 00:06: [mem 0xfff00000-0xffffffff]
[ 0.598158] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.598216] pnp 00:07: [io 0x0060]
[ 0.598220] pnp 00:07: [io 0x0064]
[ 0.598227] pnp 00:07: [irq 1]
[ 0.598282] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.598401] pnp 00:08: [irq 12]
[ 0.598463] pnp 00:08: Plug and Play ACPI device, IDs SYN1b36 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.598678] pnp: PnP ACPI: found 9 devices
[ 0.598742] ACPI: ACPI bus type pnp unregistered
[ 0.598806] PnPBIOS: Disabled by ACPI PNP
[ 0.637488] PCI: max bus depth: 1 pci_try_num: 2
[ 0.637538] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.637606] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.637678] pci 0000:00:1c.0: bridge window [mem 0xd5700000-0xd66fffff]
[ 0.637750] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.637839] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.637906] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.637977] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd56fffff]
[ 0.638049] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.638137] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.638203] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.638274] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd45fffff]
[ 0.638344] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.638432] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.638515] pci 0000:00:1c.0: enabling device (0001 -> 0003)
[ 0.638587] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.638660] pci 0000:00:1c.0: setting latency timer to 64
[ 0.638673] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.638744] pci 0000:00:1c.1: setting latency timer to 64
[ 0.638757] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.638828] pci 0000:00:1c.2: setting latency timer to 64
[ 0.638838] pci 0000:00:1e.0: setting latency timer to 64
[ 0.638844] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.638848] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.638853] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.638857] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.638861] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.638865] pci_bus 0000:02: resource 1 [mem 0xd5700000-0xd66fffff]
[ 0.638869] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.638874] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.638877] pci_bus 0000:04: resource 1 [mem 0xd4600000-0xd56fffff]
[ 0.638882] pci_bus 0000:04: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.638886] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff]
[ 0.638890] pci_bus 0000:05: resource 1 [mem 0xd3500000-0xd45fffff]
[ 0.638894] pci_bus 0000:05: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.638899] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.638903] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.638907] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.638911] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.638983] NET: Registered protocol family 2
[ 0.639213] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.639669] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.640345] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.640694] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.640763] TCP reno registered
[ 0.640825] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.640901] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.641193] NET: Registered protocol family 1
[ 0.641273] pci 0000:00:02.0: Boot video device
[ 2.240020] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.840021] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.840249] PCI: CLS 64 bytes, default 64
[ 3.840307] Unpacking initramfs...
[ 4.280419] Freeing initrd memory: 9800k freed
[ 4.285364] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 4.285437] Simple Boot Flag at 0x44 set to 0x1
[ 4.286112] audit: initializing netlink socket (disabled)
[ 4.286197] type=2000 audit(1325415826.280:1): initialized
[ 4.321320] highmem bounce pool size: 64 pages
[ 4.321395] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.336777] VFS: Disk quotas dquot_6.5.2
[ 4.337031] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.337328] msgmni has been set to 1654
[ 4.337716] alg: No test for stdrng (krng)
[ 4.337828] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.337915] io scheduler noop registered
[ 4.337981] io scheduler deadline registered
[ 4.338065] io scheduler cfq registered (default)
[ 4.338261] pcieport 0000:00:1c.0: setting latency timer to 64
[ 4.338330] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 4.338437] pcieport 0000:00:1c.1: setting latency timer to 64
[ 4.338500] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 4.338601] pcieport 0000:00:1c.2: setting latency timer to 64
[ 4.338664] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 4.338929] intel_idle: MWAIT substates: 0x3122220
[ 4.338932] intel_idle: does not run on family 6 model 23
[ 4.338985] ERST: Table is not found!
[ 4.339050] GHES: HEST is not enabled!
[ 4.339131] isapnp: Scanning for PnP cards...
[ 4.693327] isapnp: No Plug & Play device found
[ 4.693499] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.696545] Linux agpgart interface v0.103
[ 4.696809] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 4.697088] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.699190] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 4.699433] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 4.699739] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 4.716954] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.717029] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.717294] mousedev: PS/2 mouse device common for all mice
[ 4.718580] rtc_cmos 00:03: RTC can wake from S4
[ 4.718802] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.718905] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.718989] cpuidle: using governor ladder
[ 4.719055] cpuidle: using governor menu
[ 4.719473] TCP cubic registered
[ 4.719601] NET: Registered protocol family 10
[ 4.720626] Mobile IPv6
[ 4.720691] NET: Registered protocol family 17
[ 4.720761] Registering the dns_resolver key type
[ 4.720850] Using IPI No-Shortcut mode
[ 4.721075] PM: Hibernation image not present or could not be loaded.
[ 4.721095] registered taskstats version 1
[ 4.728627] rtc_cmos 00:03: setting system clock to 2012-01-01 11:03:48 UTC (1325415828)
[ 4.728831] Initializing network drop monitor service
[ 4.729043] Freeing unused kernel memory: 408k freed
[ 4.729317] Write protecting the kernel text: 2768k
[ 4.729438] Write protecting the kernel read-only data: 1092k
[ 4.729507] NX-protecting the kernel data: 3376k
[ 4.739085] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.751175] udevd[48]: starting version 175
[ 4.815488] usbcore: registered new interface driver usbfs
[ 4.815596] usbcore: registered new interface driver hub
[ 4.825310] atl1c 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.825416] atl1c 0000:05:00.0: setting latency timer to 64
[ 4.826474] SCSI subsystem initialized
[ 4.835928] usbcore: registered new device driver usb
[ 4.836530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.836642] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 4.836743] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.836749] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.836881] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.837003] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.840951] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 4.848825] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.848901] ACPI: Thermal Zone [TZ01] (51 C)
[ 4.850494] libata version 3.00 loaded.
[ 4.856789] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.864069] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xd6705c00
[ 4.896041] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.896154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.896228] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.896349] usb usb1: Product: EHCI Host Controller
[ 4.896478] usb usb1: Manufacturer: Linux 3.1.0-1-686-pae ehci_hcd
[ 4.896548] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.899040] hub 1-0:1.0: USB hub found
[ 4.899110] hub 1-0:1.0: 2 ports detected
[ 4.899304] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.899406] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.899411] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.899490] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.899612] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.903573] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 4.903863] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd6705800
[ 4.916028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.916151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.916224] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.916311] usb usb2: Product: EHCI Host Controller
[ 4.916379] usb usb2: Manufacturer: Linux 3.1.0-1-686-pae ehci_hcd
[ 4.916450] usb usb2: SerialNumber: 0000:00:1d.7
[ 4.916789] hub 2-0:1.0: USB hub found
[ 4.916860] hub 2-0:1.0: 6 ports detected
[ 4.917050] ahci 0000:00:1f.2: version 3.0
[ 4.917071] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.917209] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 4.917265] ahci: SSS flag set, parallel bus scan disabled
[ 4.917373] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 4.917463] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs
[ 4.917558] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.920951] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
[ 4.924650] scsi0 : ahci
[ 4.924861] scsi1 : ahci
[ 4.925044] scsi2 : ahci
[ 4.925221] scsi3 : ahci
[ 4.925509] ata1: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705100 irq 43
[ 4.925597] ata2: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705180 irq 43
[ 4.925682] ata3: DUMMY
[ 4.925745] ata4: DUMMY
[ 4.925850] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.925931] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.925936] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.926015] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.926147] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050a0
[ 4.926264] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.926337] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.926422] usb usb3: Product: UHCI Host Controller
[ 4.926490] usb usb3: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 4.926560] usb usb3: SerialNumber: 0000:00:1a.0
[ 4.926798] hub 3-0:1.0: USB hub found
[ 4.926868] hub 3-0:1.0: 2 ports detected
[ 4.927035] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.927113] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.927118] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.927194] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 4.927312] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
[ 4.927424] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.927496] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.927581] usb usb4: Product: UHCI Host Controller
[ 4.927649] usb usb4: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 4.927719] usb usb4: SerialNumber: 0000:00:1d.0
[ 4.927946] hub 4-0:1.0: USB hub found
[ 4.928077] hub 4-0:1.0: 2 ports detected
[ 4.928242] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.928320] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.928325] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.928401] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 4.928528] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
[ 4.928642] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.928714] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.928799] usb usb5: Product: UHCI Host Controller
[ 4.928867] usb usb5: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 4.928937] usb usb5: SerialNumber: 0000:00:1d.1
[ 4.929156] hub 5-0:1.0: USB hub found
[ 4.929225] hub 5-0:1.0: 2 ports detected
[ 4.929386] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 4.929464] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.929469] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.929545] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 4.929661] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005040
[ 4.929773] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.929845] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.929931] usb usb6: Product: UHCI Host Controller
[ 4.929998] usb usb6: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 4.930068] usb usb6: SerialNumber: 0000:00:1d.2
[ 4.930559] hub 6-0:1.0: USB hub found
[ 4.930631] hub 6-0:1.0: 2 ports detected
[ 5.208028] usb 1-2: new high speed USB device number 2 using ehci_hcd
[ 5.284024] Refined TSC clocksource calibration: 1296.749 MHz.
[ 5.284098] Switching to clocksource tsc
[ 5.373930] usb 1-2: New USB device found, idVendor=04f2, idProduct=b175
[ 5.374002] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 5.374073] usb 1-2: Product: CNF9011
[ 5.374139] usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
[ 5.374208] usb 1-2: SerialNumber: SN0001
[ 5.416023] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.417067] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC60F, max UDMA/133
[ 5.417140] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.418331] ata1.00: configured for UDMA/133
[ 5.418639] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[ 5.848025] usb 4-1: new low speed USB device number 2 using uhci_hcd
[ 5.908024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.912154] ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, AP04, max UDMA/133
[ 5.916995] ata2.00: configured for UDMA/133
[ 5.922498] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N AP04 PQ: 0 ANSI: 5
[ 5.931555] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 5.931746] sd 0:0:0:0: [sda] Write Protect is off
[ 5.931816] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.931858] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.934424] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.934511] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.934728] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.025425] usb 4-1: New USB device found, idVendor=045e, idProduct=0737
[ 6.025499] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.025571] usb 4-1: Product: Compact Optical Mouse 500
[ 6.025640] usb 4-1: Manufacturer: Microsoft
[ 6.290369] sda: sda1 sda2 < sda5 >
[ 6.290976] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.306785] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input1
[ 6.307012] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.0-1/input0
[ 6.307130] usbcore: registered new interface driver usbhid
[ 6.307200] usbhid: USB HID core driver
[ 6.677707] PM: Starting manual resume from disk
[ 6.677790] PM: Hibernation image partition 8:5 present
[ 6.677793] PM: Looking for hibernation image.
[ 6.677930] PM: Image not found (code -22)
[ 6.677933] PM: Hibernation image not present or could not be loaded.
[ 6.688671] EXT3-fs (sda1): recovery required on readonly filesystem
[ 6.688745] EXT3-fs (sda1): write access will be enabled during recovery
[ 6.718601] kjournald starting. Commit interval 5 seconds
[ 6.718791] EXT3-fs (sda1): recovery complete
[ 6.721211] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 9.442224] udevd[259]: starting version 175
[ 11.098288] ACPI: acpi_idle registered with cpuidle
[ 11.098558] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input2
[ 11.098657] ACPI: Power Button [PWRB]
[ 11.098809] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input3
[ 11.098950] ACPI: Lid Switch [LID0]
[ 11.099092] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input4
[ 11.099184] ACPI: Sleep Button [SLPB]
[ 11.100271] Monitor-Mwait will be used to enter C-1 state
[ 11.100311] Monitor-Mwait will be used to enter C-2 state
[ 11.100343] Monitor-Mwait will be used to enter C-3 state
[ 11.100351] Marking TSC unstable due to TSC halts in idle
[ 11.100612] Switching to clocksource hpet
[ 11.102381] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 11.102475] ACPI: Power Button [PWRF]
[ 11.161417] wmi: Mapper loaded
[ 11.411097] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 11.664632] iTCO_vendor_support: vendor-support=0
[ 11.703247] cfg80211: Calling CRDA to update world regulatory domain
[ 11.707629] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 12.262022] Linux media interface: v0.10
[ 12.299187] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 12.367320] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 12.596230] ACPI: Battery Slot [BAT0] (battery present)
[ 12.602075] ACPI: AC Adapter [AC] (on-line)
[ 12.722260] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 12.723238] acer_wmi: Brightness must be controlled by generic video driver
[ 12.795411] Linux video capture interface: v2.00
[ 12.934178] uvcvideo: Found UVC 1.00 device CNF9011 (04f2:b175)
[ 12.950236] input: CNF9011 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
[ 12.950442] usbcore: registered new interface driver uvcvideo
[ 12.952831] USB Video Class driver (1.1.1)
[ 13.005119] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 13.005199] Copyright(c) 2003-2011 Intel Corporation
[ 13.005330] iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.005409] iwlagn 0000:04:00.0: setting latency timer to 64
[ 13.005436] iwlagn 0000:04:00.0: pci_resource_len = 0x00002000
[ 13.005506] iwlagn 0000:04:00.0: pci_resource_base = f827c000
[ 13.005575] iwlagn 0000:04:00.0: HW Revision ID = 0x0
[ 13.005726] iwlagn 0000:04:00.0: irq 44 for MSI/MSI-X
[ 13.005768] iwlagn 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 13.005918] iwlagn 0000:04:00.0: L1 Enabled; Disabling L0S
[ 13.025445] iwlagn 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4
[ 13.025516] iwlagn 0000:04:00.0: Device SKU: 0Xf0
[ 13.025611] iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 13.084614] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 13.084816] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 13.085189] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.340041] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 13.384796] iwlagn 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692
[ 13.385147] Registered led device: phy0-led
[ 13.478712] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 13.519079] usb 3-1: New USB device found, idVendor=0489, idProduct=e011
[ 13.519157] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 13.519235] usb 3-1: Product: Acer Module
[ 13.519301] usb 3-1: Manufacturer: Broadcom Corp
[ 13.519368] usb 3-1: SerialNumber: C0CB38DF93E2
[ 13.542561] [drm] Initialized drm 1.1.0 20060810
[ 13.827098] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.827178] i915 0000:00:02.0: setting latency timer to 64
[ 13.879191] [drm:intel_opregion_setup], graphic opregion physical addr: 0xb9f8c018
[ 13.879226] [drm:intel_opregion_setup], Public ACPI methods supported
[ 13.879231] [drm:intel_opregion_setup], SWSCI supported
[ 13.879234] [drm:intel_opregion_setup], ASLE supported
[ 13.879271] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 13.879279] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.879353] [drm] Driver supports precise vblank timestamp query.
[ 13.879430] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d
[ 13.879435] [drmarse_general_definitions], crt_ddc_bus_pin: 2
[ 13.879443] [drmarse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 13.879448] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 65500 1366 1390 1406 1406 768 770 774 776 0x8 0xa
[ 13.879458] [drmarse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 13.879462] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 13.879470] [drmarse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 13.879484] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 13.879505] [drm:intel_modeset_init], 2 display pipes available.
[ 13.879522] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
[ 13.889615] Bluetooth: Core ver 2.16
[ 13.889711] NET: Registered protocol family 31
[ 13.889781] Bluetooth: HCI device and connection manager initialized
[ 13.889855] Bluetooth: HCI socket layer initialized
[ 13.889924] Bluetooth: L2CAP socket layer initialized
[ 13.890230] Bluetooth: SCO socket layer initialized
[ 13.931774] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 13.932398] [drm:intel_panel_get_backlight], get backlight PWM = 0
[ 13.932404] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 13.932444] [drm:intel_panel_get_backlight], get backlight PWM = 0
[ 13.932496] [drm:intel_setup_outputs], probing SDVOB
[ 13.934500] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 13.934505] [drm:intel_sdvo_init], No SDVO device found on SDVOB
[ 13.934541] [drm:intel_setup_outputs], probing HDMI on SDVOB
[ 13.934592] [drm:intel_setup_outputs], probing DP_B
[ 13.934641] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[ 13.935145] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 13.935149] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 13.935652] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 13.935656] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 13.935696] [drm:intel_setup_outputs], probing SDVOC
[ 13.937710] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 13.937715] [drm:intel_sdvo_init], No SDVO device found on SDVOC
[ 13.937749] [drm:intel_setup_outputs], probing DP_D
[ 13.937798] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[ 13.938301] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 13.938305] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 13.938808] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 13.938812] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 13.938856] [drm:intel_tv_init], Integrated TV is not present.
[ 13.938862] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 13.938867] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 14.236041] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
[ 14.236049] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[ 14.236055] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
[ 14.236065] [drm:intel_update_fbc],
[ 14.236069] [drm:intel_update_fbc], no output, disabling
[ 14.236075] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
[ 14.236085] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[ 14.248031] [drm:intel_update_fbc],
[ 14.248035] [drm:intel_update_fbc], no output, disabling
[ 14.248039] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
[ 14.285043] [drm:init_status_page], render ring hws offset: 0x00000000
[ 14.285210] [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000
[ 14.285228] [drm:init_status_page], bsd ring hws offset: 0x00021000
[ 14.285386] [drm:i915_setup_compression], FBC base 0xbc000000, ll base 0x00000000, size 32M
[ 14.285426] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 14.285432] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 14.285449] [drm:i915_driver_irq_handler],
[ 14.285452] [drm:drm_helper_probe_single_connector_modes], pipe B underrun
[ 14.285458] [CONNECTOR:5:LVDS-1]
[ 14.285462] [drm:intel_opregion_asle_intr], non asle set request??
[ 14.285541] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 14.285547] [drm:drm_mode_debug_printmodeline], Modeline 21:"1366x768" 60 65500 1366 1390 1406 1406 768 770 774 776 0x48 0xa
[ 14.285555] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 14.300048] [drm:intel_crt_detect], CRT not detected via hotplug
[ 14.300055] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 14.300062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1]
[ 14.308189] Intel AES-NI instructions are not detected.
[ 14.309880] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected
[ 14.309886] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17P-1]
[ 14.309891] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 14.309897] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17P-1] disconnected
[ 14.309902] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19P-2]
[ 14.310406] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 14.316616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 14.324602] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 14.332034] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 14.332040] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19P-2] disconnected
[ 14.332046] [drm:drm_setup_crtcs],
[ 14.332051] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 14.332055] [drm:drm_enable_connectors], connector 11 enabled? no
[ 14.332060] [drm:drm_enable_connectors], connector 14 enabled? no
[ 14.332064] [drm:drm_enable_connectors], connector 17 enabled? no
[ 14.332068] [drm:drm_enable_connectors], connector 19 enabled? no
[ 14.332073] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 14.332078] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 14.332083] [drm:drm_target_preferred], found mode 1366x768
[ 14.332087] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 14.332093] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 4
[ 14.340535] [drm:intelfb_create], allocated 1366x768 fb: 0x00042000, bo f7176680
[ 14.340699] fbcon: inteldrmfb (fb0) is primary device
[ 14.342559] [drm:drm_crtc_helper_set_config],
[ 14.342563] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[ 14.342573] [drm:drm_crtc_helper_set_config],
[ 14.342576] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=1 (x y) (0 0)
[ 14.342583] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 14.342587] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[ 14.342590] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 14.342596] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 65500 1366 1390 1406 1406 768 770 774 776 0x48 0xa
[ 14.342603] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 14.342607] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 14.342611] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 14.342615] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 14.342618] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 65500 1366 1390 1406 1406 768 770 774 776 0x48 0xa
[ 14.342629] [drm:drm_crtc_helper_set_mode], [CRTC:4]
[ 14.342633] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 14.342638] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 14.342659] [drm:intel_opregion_asle_intr], non asle set request??
[ 14.342701] [drm:i9xx_crtc_mode_set], Mode for pipe B:
[ 14.342704] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 65500 1366 1390 1406 1406 768 770 774 776 0x48 0xa
[ 14.343010] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
[ 14.380045] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
[ 14.380053] [drm:intel_update_fbc],
[ 14.380056] [drm:intel_update_fbc], fbc set to per-chip default
[ 14.380059] [drm:intel_update_fbc], fbc disabled per module param
[ 14.380065] [drm:g4x_check_srwm], SR watermark: display plane 52, cursor 6
[ 14.380069] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=23, cursor=6, SR: plane=52, cursor=6
[ 14.380077] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
[ 14.380082] [drm:g4x_check_srwm], SR watermark: display plane 52, cursor 6
[ 14.380086] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=23, cursor=6, SR: plane=52, cursor=6
[ 14.380575] [drm:intel_update_fbc],
[ 14.380578] [drm:intel_update_fbc], fbc set to per-chip default
[ 14.380581] [drm:intel_update_fbc], fbc disabled per module param
[ 14.380585] [drm:intel_lvds_enable], applying panel-fitter: 0, 0
[ 14.498289] padlock_aes: VIA PadLock not detected.
[ 14.510372] usbcore: registered new interface driver btusb
[ 14.776047] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 14.776053] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2649450
[ 14.776058] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 14.776069] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 14.776073] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 14.776083] [drm:i915_driver_irq_handler], pipe B underrun
[ 14.776090] [drm:intel_opregion_asle_intr], non asle set request??
[ 14.776135] [drm:drm_crtc_helper_set_config],
[ 14.776139] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=1 (x y) (0 0)
[ 14.776151] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 14.783431] Console: switching to colour frame buffer device 170x48
[ 14.783444] [drm:drm_crtc_helper_set_config],
[ 14.783447] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=1 (x y) (0 0)
[ 14.783456] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 14.790787] fb0: inteldrmfb frame buffer device
[ 14.790790] drm: registered panic notifier
[ 15.092112] acpi device:07: registered as cooling_device2
[ 15.092445] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 15.092633] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 15.092844] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 15.093210] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.093377] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 15.093420] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 15.188046] hda_codec: ALC269: BIOS auto-probing.
[ 15.189868] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 15.193596] HDMI status: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 15.196193] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.196423] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 15.196645] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 16.249663] Adding 5892092k swap on /dev/sda5. Priority:-1 extents:1 across:5892092k
[ 16.427552] EXT3-fs (sda1): using internal journal
[ 16.566163] loop: module loaded
[ 18.199818] RPC: Registered named UNIX socket transport module.
[ 18.202423] RPC: Registered udp transport module.
[ 18.205021] RPC: Registered tcp transport module.
[ 18.207559] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 18.352191] FS-Cache: Loaded
[ 18.428379] FS-Cache: Netfs 'nfs' registered for caching
[ 18.448673] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.000145] fuse init (API version 7.17)
[ 21.507792] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 21.510729] DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
[ 21.513193] NET: Registered protocol family 12
[ 22.707161] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 22.731854] atl1c 0000:05:00.0: irq 47 for MSI/MSI-X
[ 22.796614] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.816064] [drm:intel_crt_detect], CRT not detected via hotplug
[ 24.816072] [drmutput_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[ 24.825871] [drmutput_poll_execute], [CONNECTOR:14:HDMI-A-1] status updated from 2 to 2
[ 24.825877] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 24.825883] [drmutput_poll_execute], [CONNECTOR:17P-1] status updated from 2 to 2
[ 24.826388] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 24.832576] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 24.840532] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 24.848027] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 24.848034] [drmutput_poll_execute], [CONNECTOR:19P-2] status updated from 2 to 2
[ 28.548684] iwlagn 0000:04:00.0: L1 Enabled; Disabling L0S
[ 28.554057] iwlagn 0000:04:00.0: Radio type=0x1-0x2-0x0
[ 28.673178] iwlagn 0000:04:00.0: L1 Enabled; Disabling L0S
[ 28.678601] iwlagn 0000:04:00.0: Radio type=0x1-0x2-0x0
[ 28.727728] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 37.450411] wlan0: authenticate with 00:14:d1:e2:a4:b8 (try 1)
[ 37.522084] apm: BIOS not found.
[ 37.648099] wlan0: authenticate with 00:14:d1:e2:a4:b8 (try 2)
[ 37.650008] wlan0: authenticated
[ 37.654643] wlan0: associate with 00:14:d1:e2:a4:b8 (try 1)
[ 37.659105] wlan0: RX AssocResp from 00:14:d1:e2:a4:b8 (capab=0x411 status=0 aid=2)
[ 37.659111] wlan0: associated
[ 37.664143] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.780845] Bluetooth: RFCOMM TTY layer initialized
[ 38.783419] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.783542] Bluetooth: RFCOMM socket layer initialized
[ 38.783546] Bluetooth: RFCOMM ver 1.11
[ 38.791137] Bluetooth: BNEP filters: protocol multicast
[ 41.314108] [drm:drm_crtc_helper_set_config],
[ 41.314112] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=1 (x y) (0 0)
[ 41.314126] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 41.470052] [drm:i915_driver_open],
[ 41.470109] [drm:drm_crtc_helper_set_config],
[ 41.470113] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[ 41.470123] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 41.470128] [drm:drm_crtc_helper_set_config],
[ 41.470132] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=1 (x y) (0 0)
[ 41.470141] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 41.470193] [drm:i915_driver_open],
[ 41.470718] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
[ 41.470726] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
[ 41.470806] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 41.470811] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 41.470827] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 41.470833] [drm:drm_mode_debug_printmodeline], Modeline 21:"1366x768" 60 65500 1366 1390 1406 14
 
Old 01-01-2012, 11:19 AM
AlanKim Zimmerman
 
Default Bug#627372: Console turns black during boot.

Hi

Attached is the debug dmesg for 3.2-rc7. The problem is still there.

Alan

On Sun, Jan 1, 2012 at 1:30 PM, AlanKim Zimmerman <alan.zimm@gmail.com> wrote:


Hi

I reinstalled the driver, and booted with i915.modeset=1 drm.debug=14 log_buf_len=16M

Attached is the dmesg output.


Note: I attached an external screen, which shows up after around >30 secs in the dmesg.


The i915_error_state contents is
--------------------
no error state collected
------------------------

I am about to install 3.2-rc7 and try that in the same config.

Alan




On Sun, Jan 1, 2012 at 10:34 AM, Jonathan Nieder <jrnieder@gmail.com> wrote:



Hi,



AlanKim Zimmerman wrote:



> BTW, I hope there is enough detail there. Seems the i915 debug info ended

> up empty, and the detailed dmesg seems to have junk.

>

> Not sure I have the will right now to reinstall the driver, shut down and

> reboot in the flaky mode.

>

> I will if required, though. Let me know.



Unfortunately the upstream bug seems to be stalled. *Do you have any

idea what happened to the error state? *E.g., was there any message

when trying to mount debugfs or trying to capture the error state with

"cat"?



Testing should be as simple as booting with the i915.modeset=1

parameter on the kernel command line (choose the kernel in grub, hit

"e" for detailed options, move to the line starting with "linux", and

you can add parameters to the end of the line and hit ctrl-x to boot)

--- no need to install the intel X driver again. *Does 3.2-rc7 from

experimental show the same symptoms?





[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-rc7-686-pae (Debian 3.2~rc7-1~experimental.1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Wed Dec 28 21:26:25 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b9e74000 (usable)
[ 0.000000] BIOS-e820: 00000000b9e74000 - 00000000b9ebf000 (reserved)
[ 0.000000] BIOS-e820: 00000000b9ebf000 - 00000000b9f83000 (usable)
[ 0.000000] BIOS-e820: 00000000b9f83000 - 00000000b9fbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b9fbf000 - 00000000b9fe3000 (usable)
[ 0.000000] BIOS-e820: 00000000b9fe3000 - 00000000b9ff6000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b9ff6000 - 00000000b9ffe000 (usable)
[ 0.000000] BIOS-e820: 00000000b9ffe000 - 00000000b9fff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b9fff000 - 00000000ba000000 (usable)
[ 0.000000] BIOS-e820: 00000000ba000000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Packard Bell ENBFXS/ENBFXS, BIOS V1.07 12/2/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BA000000 mask FFE000000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] log_buf_len: 16777216
[ 0.000000] early log buf free: 127411(97%)
[ 0.000000] RAMDISK: 36c72000 - 37631000
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT b9ffe120 0007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP b9ff5000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT b9fe9000 07D74 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS b9f8f000 00040
[ 0.000000] ACPI: HPET b9ff4000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC b9ff3000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG b9ff2000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! b9ff1000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC b9fe8000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT b9fe7000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe6000 002E2 (v01 ACRSYS ACRPRDCT 00001000 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe5000 00C51 (v01 ACRSYS ACRPRDCT 00001000 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe4000 006A1 (v01 ACRSYS ACRPRDCT 00001000 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe3000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4230MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b9e74
[ 0.000000] 0: 0x000b9ebf -> 0x000b9f83
[ 0.000000] 0: 0x000b9fbf -> 0x000b9fe3
[ 0.000000] 0: 0x000b9ff6 -> 0x000b9ffe
[ 0.000000] 0: 0x000b9fff -> 0x000ba000
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1023732
[ 0.000000] free_area_init_node: node 0, pgdat c140bb40, node_mem_map f3472200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8461 pages used for memmap
[ 0.000000] HighMem zone: 787546 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f3200000 s33024 r0 d24320 u524288
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1013491
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-rc7-686-pae root=UUID=7910f557-5c71-42d1-bfd8-4ff17af1d3fd ro i915.modeset=1 drm.debug=14 log_buf_len=16M
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000379fe:00140000)
[ 0.000000] Memory: 4021300k/5242880k available (2810k kernel code, 73628k reserved, 1362k data, 408k init, 3184028k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1414000 - 0xc147a000 ( 408 kB)
[ 0.000000] .data : 0xc12be86c - 0xc1413400 (1362 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12be86c (2810 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f2c06000 soft=f2c08000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1296.629 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.25 BogoMIPS (lpj=5186516)
[ 0.004133] pid_max: default: 32768 minimum: 301
[ 0.004249] Security Framework initialized
[ 0.004317] AppArmor: AppArmor disabled by boot time parameter
[ 0.004403] Mount-cache hash table entries: 512
[ 0.004641] Initializing cgroup subsys cpuacct
[ 0.004710] Initializing cgroup subsys memory
[ 0.004782] Initializing cgroup subsys devices
[ 0.004845] Initializing cgroup subsys freezer
[ 0.004907] Initializing cgroup subsys net_cls
[ 0.004970] Initializing cgroup subsys blkio
[ 0.005078] CPU: Physical Processor ID: 0
[ 0.005140] CPU: Processor Core ID: 0
[ 0.005203] mce: CPU supports 6 MCE banks
[ 0.005274] CPU0: Thermal monitoring enabled (TM2)
[ 0.005339] using mwait in idle threads.
[ 0.006068] ACPI: Core revision 20110623
[ 0.020069] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020561] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061244] CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
[ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064003] ... version: 2
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] CPU 1 irqstacks, hard=f2cf2000 soft=f2cf4000
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.156046] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156217] Brought up 2 CPUs
[ 0.156279] Total of 2 processors activated (5186.74 BogoMIPS).
[ 0.159535] devtmpfs: initialized
[ 0.160026] PM: Registering ACPI NVS region at b9f83000 (245760 bytes)
[ 0.160370] print_constraints: dummy:
[ 0.160516] NET: Registered protocol family 16
[ 0.160730] ACPI: bus type pci registered
[ 0.160916] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.161003] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.161071] PCI: Using MMCONFIG for extended config space
[ 0.161136] PCI: Using configuration type 1 for base access
[ 0.161979] bio: create slab <bio-0> at 0
[ 0.161979] ACPI: Added _OSI(Module Device)
[ 0.161979] ACPI: Added _OSI(Processor Device)
[ 0.161979] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.161979] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.165737] ACPI: EC: Look up EC in DSDT
[ 0.168726] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.171991] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.172663] ACPI: SSDT b9e7dc98 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.173533] ACPI: Dynamic OEM Table Load:
[ 0.173676] ACPI: SSDT (null) 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.174083] ACPI: SSDT b9e7b598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.174918] ACPI: Dynamic OEM Table Load:
[ 0.175060] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.196494] ACPI: SSDT b9e7ce18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.197395] ACPI: Dynamic OEM Table Load:
[ 0.197540] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.208201] ACPI: SSDT b9e7df18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.211492] ACPI: Dynamic OEM Table Load:
[ 0.211636] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.236118] ACPI: Interpreter enabled
[ 0.236190] ACPI: (supports S0 S3 S4 S5)
[ 0.236453] ACPI: Using IOAPIC for interrupt routing
[ 0.444208] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.444616] ACPI: No dock devices found.
[ 0.444679] HEST: Table not found.
[ 0.444743] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.445357] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.446464] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.446533] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.446601] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.446685] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.446784] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.446846] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.446867] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.446880] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.446890] pci 0000:00:02.0: reg 20: [io 0x50d0-0x50d7]
[ 0.446937] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.446954] pci 0000:00:02.1: reg 10: [mem 0xd3400000-0xd34fffff 64bit]
[ 0.447060] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.447137] pci 0000:00:1a.0: reg 20: [io 0x50a0-0x50bf]
[ 0.447230] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.447261] pci 0000:00:1a.7: reg 10: [mem 0xd6705c00-0xd6705fff]
[ 0.447373] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.447380] pci 0000:00:1a.7: PME# disabled
[ 0.447418] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.447445] pci 0000:00:1b.0: reg 10: [mem 0xd6700000-0xd6703fff 64bit]
[ 0.447534] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.447540] pci 0000:00:1b.0: PME# disabled
[ 0.447573] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.447662] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.447668] pci 0000:00:1c.0: PME# disabled
[ 0.447704] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.447793] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.447800] pci 0000:00:1c.1: PME# disabled
[ 0.447835] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[ 0.447924] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.447931] pci 0000:00:1c.2: PME# disabled
[ 0.447975] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.448065] pci 0000:00:1d.0: reg 20: [io 0x5080-0x509f]
[ 0.448150] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.448219] pci 0000:00:1d.1: reg 20: [io 0x5060-0x507f]
[ 0.448296] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.448379] pci 0000:00:1d.2: reg 20: [io 0x5040-0x505f]
[ 0.448473] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.448505] pci 0000:00:1d.7: reg 10: [mem 0xd6705800-0xd6705bff]
[ 0.448619] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.448626] pci 0000:00:1d.7: PME# disabled
[ 0.448656] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.448747] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.448905] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.448937] pci 0000:00:1f.2: reg 10: [io 0x50c8-0x50cf]
[ 0.448950] pci 0000:00:1f.2: reg 14: [io 0x50dc-0x50df]
[ 0.448963] pci 0000:00:1f.2: reg 18: [io 0x50c0-0x50c7]
[ 0.448976] pci 0000:00:1f.2: reg 1c: [io 0x50d8-0x50db]
[ 0.448989] pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
[ 0.449003] pci 0000:00:1f.2: reg 24: [mem 0xd6705000-0xd67057ff]
[ 0.449060] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.449067] pci 0000:00:1f.2: PME# disabled
[ 0.449095] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.449121] pci 0000:00:1f.3: reg 10: [mem 0xd6706000-0xd67060ff 64bit]
[ 0.449156] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
[ 0.449210] pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180
[ 0.449245] pci 0000:00:1f.6: reg 10: [mem 0xd6704000-0xd6704fff 64bit]
[ 0.449407] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.449475] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.449482] pci 0000:00:1c.0: bridge window [mem 0xd5700000-0xd66fffff]
[ 0.449492] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.449626] pci 0000:04:00.0: [8086:4232] type 0 class 0x000280
[ 0.449700] pci 0000:04:00.0: reg 10: [mem 0xd4600000-0xd4601fff 64bit]
[ 0.449931] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.449966] pci 0000:04:00.0: PME# disabled
[ 0.450108] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.450176] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.450183] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd56fffff]
[ 0.450193] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.450280] pci 0000:05:00.0: [1969:1063] type 0 class 0x000200
[ 0.450312] pci 0000:05:00.0: reg 10: [mem 0xd3500000-0xd353ffff 64bit]
[ 0.450331] pci 0000:05:00.0: reg 18: [io 0x1000-0x107f]
[ 0.450438] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.450446] pci 0000:05:00.0: PME# disabled
[ 0.456050] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.456118] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.456125] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd45fffff]
[ 0.456135] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.456230] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.456311] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.456316] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.456321] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.456325] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.456355] pci_bus 0000:00: on NUMA node 0
[ 0.456361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.456837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.456933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.457027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.457148] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.457216] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.457299] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.466213] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.466772] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.467328] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.467884] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.468417] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.469067] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.469718] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.470272] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.470992] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.470992] vgaarb: loaded
[ 0.470992] vgaarb: bridge control possible 0000:00:02.0
[ 0.470992] PCI: Using ACPI for IRQ routing
[ 0.473900] PCI: pci_cache_line_size set to 64 bytes
[ 0.474063] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.474067] reserve RAM buffer: 00000000b9e74000 - 00000000bbffffff
[ 0.474074] reserve RAM buffer: 00000000b9f83000 - 00000000bbffffff
[ 0.474080] reserve RAM buffer: 00000000b9fe3000 - 00000000bbffffff
[ 0.474085] reserve RAM buffer: 00000000b9ffe000 - 00000000bbffffff
[ 0.474090] reserve RAM buffer: 00000000ba000000 - 00000000bbffffff
[ 0.474258] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.474332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.474600] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.480143] Switching to clocksource hpet
[ 0.483008] pnp: PnP ACPI init
[ 0.483089] ACPI: bus type pnp registered
[ 0.483676] pnp 00:00: [bus 00-ff]
[ 0.483681] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.483685] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.483688] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.483693] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.483697] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.483701] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.483704] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.483708] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.483713] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.483717] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.483721] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.483724] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.483728] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.483732] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.483736] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.483740] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.483744] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.483748] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.483752] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.483848] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.584240] pnp 00:01: [io 0x002e-0x002f]
[ 0.584244] pnp 00:01: [io 0x004e-0x004f]
[ 0.584248] pnp 00:01: [io 0x164e-0x164f]
[ 0.584251] pnp 00:01: [io 0x0061]
[ 0.584254] pnp 00:01: [io 0x0070]
[ 0.584257] pnp 00:01: [io 0x0080]
[ 0.584263] pnp 00:01: [io 0x0092]
[ 0.584266] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.584269] pnp 00:01: [io 0x0063]
[ 0.584272] pnp 00:01: [io 0x0065]
[ 0.584275] pnp 00:01: [io 0x0067]
[ 0.584278] pnp 00:01: [io 0x0600-0x060f]
[ 0.584282] pnp 00:01: [io 0x0610]
[ 0.584285] pnp 00:01: [io 0x0800-0x080f]
[ 0.584288] pnp 00:01: [io 0x0810-0x0817]
[ 0.584291] pnp 00:01: [io 0x0820-0x0823]
[ 0.584295] pnp 00:01: [io 0x0400-0x047f]
[ 0.584298] pnp 00:01: [io 0x0500-0x057f]
[ 0.584301] pnp 00:01: [io 0x0068]
[ 0.584304] pnp 00:01: [io 0x006c]
[ 0.584307] pnp 00:01: [io 0xff2c-0xff2f]
[ 0.584311] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.584315] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.584318] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.584322] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.584325] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.584328] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.584332] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[ 0.584335] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.584372] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x2fff]
[ 0.584559] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.584627] system 00:01: [io 0x0610] has been reserved
[ 0.584693] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.584760] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.584827] system 00:01: [io 0x0820-0x0823] has been reserved
[ 0.584894] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.584960] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.585028] system 00:01: [io 0xff2c-0xff2f] has been reserved
[ 0.585096] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.585165] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.585234] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.585302] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.585371] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.585440] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.585510] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.585578] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.585647] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.585665] pnp 00:02: [io 0x0000-0x001f]
[ 0.585668] pnp 00:02: [io 0x0081-0x0091]
[ 0.585672] pnp 00:02: [io 0x0093-0x009f]
[ 0.585675] pnp 00:02: [io 0x00c0-0x00df]
[ 0.585678] pnp 00:02: [dma 4]
[ 0.585733] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.585772] pnp 00:03: [io 0x0070-0x0077]
[ 0.585828] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.585938] pnp 00:04: [irq 0 disabled]
[ 0.585949] pnp 00:04: [irq 8]
[ 0.585953] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.586009] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.586028] pnp 00:05: [io 0x00f0]
[ 0.586036] pnp 00:05: [irq 13]
[ 0.586097] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.586115] pnp 00:06: [mem 0xfff00000-0xffffffff]
[ 0.586171] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.586229] pnp 00:07: [io 0x0060]
[ 0.586233] pnp 00:07: [io 0x0064]
[ 0.586240] pnp 00:07: [irq 1]
[ 0.586298] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.586416] pnp 00:08: [irq 12]
[ 0.586480] pnp 00:08: Plug and Play ACPI device, IDs SYN1b36 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.586693] pnp: PnP ACPI: found 9 devices
[ 0.586756] ACPI: ACPI bus type pnp unregistered
[ 0.586820] PnPBIOS: Disabled by ACPI PNP
[ 0.625312] PCI: max bus depth: 1 pci_try_num: 2
[ 0.625361] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.625429] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.625501] pci 0000:00:1c.0: bridge window [mem 0xd5700000-0xd66fffff]
[ 0.625571] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.625660] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.625727] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.625798] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd56fffff]
[ 0.625868] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.625956] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.626022] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.626093] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd45fffff]
[ 0.626163] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.626252] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.626335] pci 0000:00:1c.0: enabling device (0001 -> 0003)
[ 0.626414] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.626487] pci 0000:00:1c.0: setting latency timer to 64
[ 0.626502] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.626572] pci 0000:00:1c.1: setting latency timer to 64
[ 0.626587] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.626658] pci 0000:00:1c.2: setting latency timer to 64
[ 0.626668] pci 0000:00:1e.0: setting latency timer to 64
[ 0.626674] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.626679] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.626683] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.626687] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.626691] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.626695] pci_bus 0000:02: resource 1 [mem 0xd5700000-0xd66fffff]
[ 0.626699] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.626703] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.626707] pci_bus 0000:04: resource 1 [mem 0xd4600000-0xd56fffff]
[ 0.626711] pci_bus 0000:04: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.626715] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff]
[ 0.626719] pci_bus 0000:05: resource 1 [mem 0xd3500000-0xd45fffff]
[ 0.626723] pci_bus 0000:05: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.626727] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.626731] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.626734] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.626738] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.626811] NET: Registered protocol family 2
[ 0.626967] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.627360] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.627947] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.628267] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.628336] TCP reno registered
[ 0.628399] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.628473] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.628651] NET: Registered protocol family 1
[ 0.628730] pci 0000:00:02.0: Boot video device
[ 2.228020] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.828021] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.828253] PCI: CLS 64 bytes, default 64
[ 3.828317] Unpacking initramfs...
[ 4.275901] Freeing initrd memory: 9980k freed
[ 4.280962] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 4.281036] Simple Boot Flag at 0x44 set to 0x1
[ 4.281721] audit: initializing netlink socket (disabled)
[ 4.281802] type=2000 audit(1325417748.276:1): initialized
[ 4.311232] highmem bounce pool size: 64 pages
[ 4.311307] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.326679] VFS: Disk quotas dquot_6.5.2
[ 4.326804] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.326981] msgmni has been set to 1654
[ 4.327312] alg: No test for stdrng (krng)
[ 4.327421] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.327507] io scheduler noop registered
[ 4.327573] io scheduler deadline registered
[ 4.327657] io scheduler cfq registered (default)
[ 4.327853] pcieport 0000:00:1c.0: setting latency timer to 64
[ 4.327926] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 4.328056] pcieport 0000:00:1c.1: setting latency timer to 64
[ 4.328123] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 4.328230] pcieport 0000:00:1c.2: setting latency timer to 64
[ 4.328296] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 4.328573] intel_idle: MWAIT substates: 0x3122220
[ 4.328576] intel_idle: does not run on family 6 model 23
[ 4.328629] ERST: Table is not found!
[ 4.328694] GHES: HEST is not enabled!
[ 4.328777] isapnp: Scanning for PnP cards...
[ 4.682931] isapnp: No Plug & Play device found
[ 4.683097] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.688556] Linux agpgart interface v0.103
[ 4.688823] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 4.689110] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.691245] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 4.691487] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 4.691808] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 4.708071] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.708146] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.708420] mousedev: PS/2 mouse device common for all mice
[ 4.710176] rtc_cmos 00:03: RTC can wake from S4
[ 4.710508] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.710611] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.710695] cpuidle: using governor ladder
[ 4.710760] cpuidle: using governor menu
[ 4.711143] TCP cubic registered
[ 4.711265] NET: Registered protocol family 10
[ 4.712130] Mobile IPv6
[ 4.712194] NET: Registered protocol family 17
[ 4.712263] Registering the dns_resolver key type
[ 4.712354] Using IPI No-Shortcut mode
[ 4.712588] PM: Hibernation image not present or could not be loaded.
[ 4.712603] registered taskstats version 1
[ 4.720116] rtc_cmos 00:03: setting system clock to 2012-01-01 11:35:49 UTC (1325417749)
[ 4.720319] Initializing network drop monitor service
[ 4.720518] Freeing unused kernel memory: 408k freed
[ 4.720772] Write protecting the kernel text: 2812k
[ 4.720894] Write protecting the kernel read-only data: 1104k
[ 4.720962] NX-protecting the kernel data: 3332k
[ 4.730600] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.742983] udevd[49]: starting version 175
[ 4.798774] atl1c 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.798862] atl1c 0000:05:00.0: setting latency timer to 64
[ 4.817652] usbcore: registered new interface driver usbfs
[ 4.817762] usbcore: registered new interface driver hub
[ 4.827638] usbcore: registered new device driver usb
[ 4.828402] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.828520] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 4.828617] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.828623] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.828721] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.828842] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.832810] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 4.838980] SCSI subsystem initialized
[ 4.844345] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.844421] ACPI: Thermal Zone [TZ01] (54 C)
[ 4.853508] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xd6705c00
[ 4.869110] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.869225] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.869298] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.869385] usb usb1: Product: EHCI Host Controller
[ 4.869454] usb usb1: Manufacturer: Linux 3.2.0-rc7-686-pae ehci_hcd
[ 4.869525] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.869786] hub 1-0:1.0: USB hub found
[ 4.869859] hub 1-0:1.0: 2 ports detected
[ 4.870068] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.882571] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.882579] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.882668] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.883184] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.887133] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 4.888512] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd6705800
[ 4.892632] libata version 3.00 loaded.
[ 4.900904] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
[ 4.904169] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.904299] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.904372] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.904458] usb usb2: Product: EHCI Host Controller
[ 4.904526] usb usb2: Manufacturer: Linux 3.2.0-rc7-686-pae ehci_hcd
[ 4.904597] usb usb2: SerialNumber: 0000:00:1d.7
[ 4.905073] hub 2-0:1.0: USB hub found
[ 4.905145] hub 2-0:1.0: 6 ports detected
[ 4.905342] ahci 0000:00:1f.2: version 3.0
[ 4.905379] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.905519] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 4.905573] ahci: SSS flag set, parallel bus scan disabled
[ 4.905677] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 4.905766] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs
[ 4.905859] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.912854] scsi0 : ahci
[ 4.913078] scsi1 : ahci
[ 4.913258] scsi2 : ahci
[ 4.916588] scsi3 : ahci
[ 4.916899] ata1: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705100 irq 43
[ 4.916987] ata2: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705180 irq 43
[ 4.917072] ata3: DUMMY
[ 4.917135] ata4: DUMMY
[ 4.933037] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.933162] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.933243] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.933248] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.933329] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.933471] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050a0
[ 4.933592] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.933672] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.933758] usb usb3: Product: UHCI Host Controller
[ 4.933826] usb usb3: Manufacturer: Linux 3.2.0-rc7-686-pae uhci_hcd
[ 4.933897] usb usb3: SerialNumber: 0000:00:1a.0
[ 4.934477] hub 3-0:1.0: USB hub found
[ 4.934549] hub 3-0:1.0: 2 ports detected
[ 4.934729] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.934808] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.934813] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.934892] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 4.935009] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
[ 4.935123] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.935196] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.935282] usb usb4: Product: UHCI Host Controller
[ 4.935351] usb usb4: Manufacturer: Linux 3.2.0-rc7-686-pae uhci_hcd
[ 4.935422] usb usb4: SerialNumber: 0000:00:1d.0
[ 4.935658] hub 4-0:1.0: USB hub found
[ 4.935728] hub 4-0:1.0: 2 ports detected
[ 4.935898] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.935976] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.935982] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.936082] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 4.936213] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
[ 4.936325] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.936399] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.936485] usb usb5: Product: UHCI Host Controller
[ 4.936553] usb usb5: Manufacturer: Linux 3.2.0-rc7-686-pae uhci_hcd
[ 4.936623] usb usb5: SerialNumber: 0000:00:1d.1
[ 4.936968] hub 5-0:1.0: USB hub found
[ 4.937039] hub 5-0:1.0: 2 ports detected
[ 4.937213] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 4.937292] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.937298] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.937375] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 4.937520] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005040
[ 4.937632] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.937704] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.937789] usb usb6: Product: UHCI Host Controller
[ 4.937857] usb usb6: Manufacturer: Linux 3.2.0-rc7-686-pae uhci_hcd
[ 4.937927] usb usb6: SerialNumber: 0000:00:1d.2
[ 4.938168] hub 6-0:1.0: USB hub found
[ 4.938238] hub 6-0:1.0: 2 ports detected
[ 5.180025] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 5.280023] Refined TSC clocksource calibration: 1296.749 MHz.
[ 5.280096] Switching to clocksource tsc
[ 5.346001] usb 1-2: New USB device found, idVendor=04f2, idProduct=b175
[ 5.346073] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 5.346144] usb 1-2: Product: CNF9011
[ 5.346209] usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
[ 5.346278] usb 1-2: SerialNumber: SN0001
[ 5.408024] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.409069] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC60F, max UDMA/133
[ 5.409144] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.410337] ata1.00: configured for UDMA/133
[ 5.410576] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[ 5.644012] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 5.821123] usb 4-1: New USB device found, idVendor=045e, idProduct=0737
[ 5.821195] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.821267] usb 4-1: Product: Compact Optical Mouse 500
[ 5.821335] usb 4-1: Manufacturer: Microsoft
[ 5.900026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.904160] ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, AP04, max UDMA/133
[ 5.908996] ata2.00: configured for UDMA/133
[ 5.914476] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N AP04 PQ: 0 ANSI: 5
[ 5.924219] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 5.924412] sd 0:0:0:0: [sda] Write Protect is off
[ 5.924483] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.924526] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.926550] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.926637] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.926887] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.932475] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input1
[ 5.932717] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.0-1/input0
[ 5.932835] usbcore: registered new interface driver usbhid
[ 5.932904] usbhid: USB HID core driver
[ 5.974836] sda: sda1 sda2 < sda5 >
[ 5.975399] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.417785] PM: Starting manual resume from disk
[ 6.417867] PM: Hibernation image partition 8:5 present
[ 6.417870] PM: Looking for hibernation image.
[ 6.418041] PM: Image not found (code -22)
[ 6.418045] PM: Hibernation image not present or could not be loaded.
[ 6.500394] kjournald starting. Commit interval 5 seconds
[ 6.500541] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 8.876938] udevd[266]: starting version 175
[ 10.275589] Monitor-Mwait will be used to enter C-1 state
[ 10.275631] Monitor-Mwait will be used to enter C-2 state
[ 10.275664] Monitor-Mwait will be used to enter C-3 state
[ 10.275671] Marking TSC unstable due to TSC halts in idle
[ 10.275772] ACPI: acpi_idle registered with cpuidle
[ 10.275963] Switching to clocksource hpet
[ 10.366118] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input2
[ 10.366216] ACPI: Power Button [PWRB]
[ 10.366381] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input3
[ 10.366517] ACPI: Lid Switch [LID0]
[ 10.366666] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input4
[ 10.366763] ACPI: Sleep Button [SLPB]
[ 10.366935] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 10.367025] ACPI: Power Button [PWRF]
[ 10.648728] wmi: Mapper loaded
[ 10.939897] ACPI: AC Adapter [AC] (on-line)
[ 11.118854] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 11.252205] cfg80211: Calling CRDA to update world regulatory domain
[ 11.281782] iTCO_vendor_support: vendor-support=0
[ 11.415162] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 11.487205] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.488546] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 11.574367] Linux media interface: v0.10
[ 12.456204] ACPI: Battery Slot [BAT0] (battery present)
[ 12.686250] Linux video capture interface: v2.00
[ 12.787749] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 12.787824] Copyright(c) 2003-2011 Intel Corporation
[ 12.787986] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 12.788122] iwlwifi 0000:04:00.0: setting latency timer to 64
[ 12.788173] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000
[ 12.788243] iwlwifi 0000:04:00.0: pci_resource_base = f8238000
[ 12.788312] iwlwifi 0000:04:00.0: HW Revision ID = 0x0
[ 12.788647] iwlwifi 0000:04:00.0: irq 44 for MSI/MSI-X
[ 12.788763] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 12.791272] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 12.803978] [drm] Initialized drm 1.1.0 20060810
[ 12.810822] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4
[ 12.810893] iwlwifi 0000:04:00.0: Device SKU: 0Xf0
[ 12.810973] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 12.888292] uvcvideo: Found UVC 1.00 device CNF9011 (04f2:b175)
[ 12.904233] input: CNF9011 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
[ 12.904468] usbcore: registered new interface driver uvcvideo
[ 12.904538] USB Video Class driver (1.1.1)
[ 12.915225] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.915302] i915 0000:00:02.0: setting latency timer to 64
[ 12.970057] [drm:intel_opregion_setup], graphic opregion physical addr: 0xb9f8c018
[ 12.970083] [drm:intel_opregion_setup], Public ACPI methods supported
[ 12.970087] [drm:intel_opregion_setup], SWSCI supported
[ 12.970090] [drm:intel_opregion_setup], ASLE supported
[ 12.970133] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 12.970142] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.970214] [drm] Driver supports precise vblank timestamp query.
[ 12.970290] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[ 12.970294] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d
[ 12.970298] [drmarse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96 display_clock_mode 0
[ 12.970305] [drmarse_general_definitions], crt_ddc_bus_pin: 2
[ 12.970312] [drmarse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 12.970316] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 65500 1366 1390 1406 1406 768 770 774 776 0x8 0xa
[ 12.970325] [drmarse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 12.970329] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 12.970337] [drmarse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 12.970349] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 12.970367] [drm:intel_modeset_init], 2 display pipes available.
[ 12.970384] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
[ 12.977591] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 12.978692] acer_wmi: Function bitmap for Communication Device: 0x91
[ 12.978940] acer_wmi: Brightness must be controlled by generic video driver
[ 13.023721] [drm:intel_panel_get_backlight], get backlight PWM = 0
[ 13.023726] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 13.023766] [drm:intel_panel_get_backlight], get backlight PWM = 0
[ 13.023818] [drm:intel_setup_outputs], probing SDVOB
[ 13.025829] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 13.025833] [drm:intel_sdvo_init], No SDVO device found on SDVOB
[ 13.025870] [drm:intel_setup_outputs], probing HDMI on SDVOB
[ 13.025927] [drm:intel_setup_outputs], probing DP_B
[ 13.025977] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[ 13.026481] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 13.026485] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 13.026988] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 13.026992] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 13.027031] [drm:intel_setup_outputs], probing SDVOC
[ 13.029033] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 13.029037] [drm:intel_sdvo_init], No SDVO device found on SDVOC
[ 13.029070] [drm:intel_setup_outputs], probing DP_D
[ 13.029120] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[ 13.029623] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 13.029627] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 13.030129] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 13.030133] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 13.030178] [drm:intel_tv_init], Integrated TV is not present.
[ 13.030184] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 13.030189] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 13.034112] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 13.034305] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 13.034459] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.325342] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692
[ 13.325727] Registered led device: phy0-led
[ 13.328070] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
[ 13.328076] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[ 13.328082] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
[ 13.328092] [drm:intel_update_fbc],
[ 13.328095] [drm:intel_update_fbc], no output, disabling
[ 13.328101] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
[ 13.328110] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[ 13.336063] [drm:intel_update_fbc],
[ 13.336068] [drm:intel_update_fbc], no output, disabling
[ 13.336074] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
[ 13.373115] [drm:init_status_page], render ring hws offset: 0x00000000
[ 13.373279] [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000
[ 13.373297] [drm:init_status_page], bsd ring hws offset: 0x00021000
[ 13.373454] [drm:i915_setup_compression], FBC base 0xbc000000, ll base 0x00000000, size 32M
[ 13.373494] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 13.373500] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 13.373517] [drm:i915_driver_irq_handler], pipe B underrun
[ 13.373522] [drm:drm_helper_probe_single_connector_modes],
[ 13.373527] [drm:intel_opregion_asle_intr], non asle set request??
[ 13.373531] [CONNECTOR:5:LVDS-1]
[ 13.373610] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 13.373615] [drm:drm_mode_debug_printmodeline], Modeline 21:"1366x768" 60 65500 1366 1390 1406 1406 768 770 774 776 0x48 0xa
[ 13.373624] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 13.388038] [drm:intel_crt_detect], CRT not detected via hotplug
[ 13.388044] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 13.388050] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1]
[ 13.397845] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected
[ 13.397851] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17P-1]
[ 13.397856] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 13.397861] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17P-1] disconnected
[ 13.397866] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19P-2]
[ 13.398369] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 13.402676] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 13.404529] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 13.412542] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 13.420044] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 13.420052] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19P-2] disconnected
[ 13.420059] [drm:drm_setup_crtcs],
[ 13.420064] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 13.420068] [drm:drm_enable_connectors], connector 11 enabled? no
[ 13.420072] [drm:drm_enable_connectors], connector 14 enabled? no
[ 13.420077] [drm:drm_enable_connectors], connector 17 enabled? no
[ 13.420081] [drm:drm_enable_connectors], connector 19 enabled? no
[ 13.420085] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 13.420090] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 13.420094] [drm:drm_target_preferred], found mode 1366x768
[ 13.420098] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 13.420104] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 4
[ 13.431868] [drm:intelfb_create], allocated 1366x768 fb: 0x00042000, bo f7239ac0
[ 13.432047] fbcon: inteldrmfb (fb0) is primary device
[ 13.434224] [drm:drm_crtc_helper_set_config],
[ 13.434228] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[ 13.434234] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 13.434239] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 13.434251] [drm:intel_opregion_asle_intr], non asle set request??
[ 13.434264] [drm:drm_crtc_helper_set_config],
[ 13.434267] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=1 (x y) (0 0)
[ 13.434280] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 13.434283] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[ 13.434287] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 13.434293] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 65500 1366 1390 1406 1406 768 770 774 776 0x48 0xa
[ 13.434300] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 13.434304] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 13.434308] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 13.434312] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 13.434315] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 65500 1366 1390 1406 1406 768 770 774 776 0x48 0xa
[ 13.434325] [drm:drm_crtc_helper_set_mode], [CRTC:4]
[ 13.434329] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 13.434333] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 13.434343] [drm:intel_opregion_asle_intr], non asle set request??
[ 13.434390] [drm:i9xx_crtc_mode_set], Mode for pipe B:
[ 13.434394] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 65500 1366 1390 1406 1406 768 770 774 776 0x48 0xa
[ 13.434700] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
[ 13.468096] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
[ 13.468103] [drm:intel_update_fbc],
[ 13.468106] [drm:intel_update_fbc], fbc set to per-chip default
[ 13.468109] [drm:intel_update_fbc], fbc disabled per module param
[ 13.468114] [drm:g4x_check_srwm], SR watermark: display plane 52, cursor 6
[ 13.468119] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=23, cursor=6, SR: plane=52, cursor=6
[ 13.468128] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
[ 13.468133] [drm:g4x_check_srwm], SR watermark: display plane 52, cursor 6
[ 13.468137] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=23, cursor=6, SR: plane=52, cursor=6
[ 13.468627] [drm:intel_update_fbc],
[ 13.468630] [drm:intel_update_fbc], fbc set to per-chip default
[ 13.468633] [drm:intel_update_fbc], fbc disabled per module param
[ 13.468637] [drm:intel_lvds_enable], applying panel-fitter: 0, 0
[ 13.556042] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 13.726203] usb 3-1: New USB device found, idVendor=0489, idProduct=e011
[ 13.726208] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 13.726212] usb 3-1: Product: Acer Module
[ 13.726215] usb 3-1: Manufacturer: Broadcom Corp
[ 13.726218] usb 3-1: SerialNumber: C0CB38DF93E2
[ 13.831972] Bluetooth: Core ver 2.16
[ 13.831996] NET: Registered protocol family 31
[ 13.832020] Bluetooth: HCI device and connection manager initialized
[ 13.832024] Bluetooth: HCI socket layer initialized
[ 13.832027] Bluetooth: L2CAP socket layer initialized
[ 13.832034] Bluetooth: SCO socket layer initialized
[ 13.856159] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 13.856164] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2649450
[ 13.856175] [drm:intel_panel_get_max_backlight], max backlight PWM = 2649450
[ 13.856185] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 13.856189] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 13.856203] [drm:intel_opregion_asle_intr], non asle set request??
[ 13.856246] [drm:drm_crtc_helper_set_config],
[ 13.856248] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=1 (x y) (0 0)
[ 13.856261] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 13.863365] Console: switching to colour frame buffer device 170x48
[ 13.863378] [drm:drm_crtc_helper_set_config],
[ 13.863381] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=1 (x y) (0 0)
[ 13.863390] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 13.871213] fb0: inteldrmfb frame buffer device
[ 13.871216] drm: registered panic notifier
[ 13.873992] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 13.875100] usbcore: registered new interface driver btusb
[ 14.172092] acpi device:07: registered as cooling_device2
[ 14.172432] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 14.172613] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 14.172784] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.173130] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.173296] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 14.173338] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 14.275563] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 14.280961] HDMI status: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 14.283841] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.287358] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.290270] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 15.300731] Adding 5892092k swap on /dev/sda5. Priority:-1 extents:1 across:5892092k
[ 15.492369] EXT3-fs (sda1): using internal journal
[ 15.689009] loop: module loaded
[ 17.590241] RPC: Registered named UNIX socket transport module.
[ 17.592765] RPC: Registered udp transport module.
[ 17.595303] RPC: Registered tcp transport module.
[ 17.597807] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.722699] FS-Cache: Loaded
[ 17.788221] FS-Cache: Netfs 'nfs' registered for caching
[ 17.798537] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.646558] fuse init (API version 7.17)
[ 21.377549] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 21.380743] DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
[ 21.383404] NET: Registered protocol family 12
[ 22.047166] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 22.360884] atl1c 0000:05:00.0: irq 47 for MSI/MSI-X
[ 22.420648] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.920047] [drm:intel_crt_detect], CRT not detected via hotplug
[ 23.920054] [drmutput_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[ 23.929850] [drmutput_poll_execute], [CONNECTOR:14:HDMI-A-1] status updated from 2 to 2
[ 23.929856] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 23.929862] [drmutput_poll_execute], [CONNECTOR:17P-1] status updated from 2 to 2
[ 23.930367] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 23.936537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 23.944535] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 23.952070] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 23.952077] [drmutput_poll_execute], [CONNECTOR:19P-2] status updated from 2 to 2
[ 27.844197] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 27.849840] iwlwifi 0000:04:00.0: Radio type=0x1-0x2-0x0
[ 27.969209] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 27.974903] iwlwifi 0000:04:00.0: Radio type=0x1-0x2-0x0
[ 28.024069] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.242374] [drm:drm_crtc_helper_set_config],
[ 34.242378] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=1 (x y) (0 0)
[ 34.242393] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 34.415555] [drm:i915_driver_open],
[ 34.415615] [drm:drm_crtc_helper_set_config],
[ 34.415619] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[ 34.415631] [drm:drm_crtc_helper_set_config],
[ 34.415635] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=1 (x y) (0 0)
[ 34.415649] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 34.415702] [drm:i915_driver_open],
[ 34.416254] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
[ 34.416263] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
[ 34.416347] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 34.416353] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 34.416370] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 34.416376] [drm:drm_mode_debug_printmodeline], Modeline 21:"1366x768" 60 65500 1366 1390 1406 1406 768 770 774 776 0x48 0xa
[ 34.416386] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 34.516141] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 34.516148] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 34.532165] [drm:intel_crt_detect], CRT not detected via hotplug
[ 34.532177] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 34.532186] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 34.532190] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 34.548099] [drm:intel_crt_detect], CRT not detected via hotplug
[ 34
 
Old 01-01-2012, 11:55 AM
AlanKim Zimmerman
 
Default Bug#627372: Console turns black during boot.

Hi Jonathan

Just booted my laptop normally and logged in blind, with the driver installed, and captured some i915 error log.

See attached

Alan


On Sun, Jan 1, 2012 at 2:19 PM, AlanKim Zimmerman <alan.zimm@gmail.com> wrote:


Hi

Attached is the debug dmesg for 3.2-rc7. The problem is still there.

Alan



On Sun, Jan 1, 2012 at 1:30 PM, AlanKim Zimmerman <alan.zimm@gmail.com> wrote:

Hi

I reinstalled the driver, and booted with i915.modeset=1 drm.debug=14 log_buf_len=16M

Attached is the dmesg output.



Note: I attached an external screen, which shows up after around >30 secs in the dmesg.


The i915_error_state contents is
--------------------
no error state collected
------------------------

I am about to install 3.2-rc7 and try that in the same config.

Alan



On Sun, Jan 1, 2012 at 10:34 AM, Jonathan Nieder <jrnieder@gmail.com> wrote:




Hi,



AlanKim Zimmerman wrote:



> BTW, I hope there is enough detail there. Seems the i915 debug info ended

> up empty, and the detailed dmesg seems to have junk.

>

> Not sure I have the will right now to reinstall the driver, shut down and

> reboot in the flaky mode.

>

> I will if required, though. Let me know.



Unfortunately the upstream bug seems to be stalled. *Do you have any

idea what happened to the error state? *E.g., was there any message

when trying to mount debugfs or trying to capture the error state with

"cat"?



Testing should be as simple as booting with the i915.modeset=1

parameter on the kernel command line (choose the kernel in grub, hit

"e" for detailed options, move to the line starting with "linux", and

you can add parameters to the end of the line and hit ctrl-x to boot)

--- no need to install the intel X driver again. *Does 3.2-rc7 from

experimental show the same symptoms?







[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1-686-pae (Debian 3.1.5-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Sun Dec 11 20:40:16 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b9e74000 (usable)
[ 0.000000] BIOS-e820: 00000000b9e74000 - 00000000b9ebf000 (reserved)
[ 0.000000] BIOS-e820: 00000000b9ebf000 - 00000000b9f83000 (usable)
[ 0.000000] BIOS-e820: 00000000b9f83000 - 00000000b9fbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b9fbf000 - 00000000b9fe3000 (usable)
[ 0.000000] BIOS-e820: 00000000b9fe3000 - 00000000b9ff6000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b9ff6000 - 00000000b9ffe000 (usable)
[ 0.000000] BIOS-e820: 00000000b9ffe000 - 00000000b9fff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b9fff000 - 00000000ba000000 (usable)
[ 0.000000] BIOS-e820: 00000000ba000000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Packard Bell ENBFXS/ENBFXS, BIOS V1.07 12/2/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BA000000 mask FFE000000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 36ccc000 - 3765e000
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT b9ffe120 0007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP b9ff5000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT b9fe9000 07D74 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS b9f8f000 00040
[ 0.000000] ACPI: HPET b9ff4000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC b9ff3000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG b9ff2000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! b9ff1000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC b9fe8000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT b9fe7000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe6000 002E2 (v01 ACRSYS ACRPRDCT 00001000 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe5000 00C51 (v01 ACRSYS ACRPRDCT 00001000 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe4000 006A1 (v01 ACRSYS ACRPRDCT 00001000 1025 01000013)
[ 0.000000] ACPI: SSDT b9fe3000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4230MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b9e74
[ 0.000000] 0: 0x000b9ebf -> 0x000b9f83
[ 0.000000] 0: 0x000b9fbf -> 0x000b9fe3
[ 0.000000] 0: 0x000b9ff6 -> 0x000b9ffe
[ 0.000000] 0: 0x000b9fff -> 0x000ba000
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1023732
[ 0.000000] free_area_init_node: node 0, pgdat c1438840, node_mem_map f44cc200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8461 pages used for memmap
[ 0.000000] HighMem zone: 787546 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f4200000 s31744 r0 d21504 u524288
[ 0.000000] pcpu-alloc: s31744 r0 d21504 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1013491
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=7910f557-5c71-42d1-bfd8-4ff17af1d3fd ro vga=785
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000379fe:00140000)
[ 0.000000] Memory: 4037684k/5242880k available (2766k kernel code, 57244k reserved, 1585k data, 408k init, 3184028k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1440000 - 0xc14a6000 ( 408 kB)
[ 0.000000] .data : 0xc12b39ac - 0xc143ff00 (1585 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12b39ac (2766 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f3c0a000 soft=f3c0c000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1296.712 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.42 BogoMIPS (lpj=5186848)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004092] Security Framework initialized
[ 0.004139] Mount-cache hash table entries: 512
[ 0.004751] Initializing cgroup subsys cpuacct
[ 0.004821] Initializing cgroup subsys memory
[ 0.004852] Initializing cgroup subsys devices
[ 0.004858] Initializing cgroup subsys freezer
[ 0.004864] Initializing cgroup subsys net_cls
[ 0.004870] Initializing cgroup subsys blkio
[ 0.004921] CPU: Physical Processor ID: 0
[ 0.004927] CPU: Processor Core ID: 0
[ 0.004935] mce: CPU supports 6 MCE banks
[ 0.004949] CPU0: Thermal monitoring enabled (TM2)
[ 0.004956] using mwait in idle threads.
[ 0.005621] ACPI: Core revision 20110623
[ 0.020069] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020435] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061403] CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
[ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064003] ... version: 2
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] CPU 1 irqstacks, hard=f3cf4000 soft=f3cf6000
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.152043] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152102] Brought up 2 CPUs
[ 0.152110] Total of 2 processors activated (5186.91 BogoMIPS).
[ 0.154268] devtmpfs: initialized
[ 0.154268] PM: Registering ACPI NVS region at b9f83000 (245760 bytes)
[ 0.154268] print_constraints: dummy:
[ 0.154268] NET: Registered protocol family 16
[ 0.154268] ACPI: bus type pci registered
[ 0.154268] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.154268] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.154268] PCI: Using MMCONFIG for extended config space
[ 0.154268] PCI: Using configuration type 1 for base access
[ 0.156469] bio: create slab <bio-0> at 0
[ 0.156469] ACPI: Added _OSI(Module Device)
[ 0.156469] ACPI: Added _OSI(Processor Device)
[ 0.156469] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.156469] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.159092] ACPI: EC: Look up EC in DSDT
[ 0.162912] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.165936] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.166589] ACPI: SSDT b9e7dc98 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.167303] ACPI: Dynamic OEM Table Load:
[ 0.167312] ACPI: SSDT (null) 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.167572] ACPI: SSDT b9e7b598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.168265] ACPI: Dynamic OEM Table Load:
[ 0.168274] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.192498] ACPI: SSDT b9e7ce18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.193242] ACPI: Dynamic OEM Table Load:
[ 0.193251] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.204201] ACPI: SSDT b9e7df18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.204908] ACPI: Dynamic OEM Table Load:
[ 0.204917] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.232118] ACPI: Interpreter enabled
[ 0.232131] ACPI: (supports S0 S3 S4 S5)
[ 0.232181] ACPI: Using IOAPIC for interrupt routing
[ 0.440397] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.440741] ACPI: No dock devices found.
[ 0.440748] HEST: Table not found.
[ 0.440756] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.441308] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.442379] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.442389] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.442397] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.442408] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.442433] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.442467] DMAR: Forcing write-buffer flush capability
[ 0.442473] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.442509] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.442530] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.442544] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.442553] pci 0000:00:02.0: reg 20: [io 0x50d0-0x50d7]
[ 0.442601] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.442619] pci 0000:00:02.1: reg 10: [mem 0xd3400000-0xd34fffff 64bit]
[ 0.442731] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.442813] pci 0000:00:1a.0: reg 20: [io 0x50a0-0x50bf]
[ 0.442909] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.442941] pci 0000:00:1a.7: reg 10: [mem 0xd6705c00-0xd6705fff]
[ 0.443050] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.443057] pci 0000:00:1a.7: PME# disabled
[ 0.443095] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.443121] pci 0000:00:1b.0: reg 10: [mem 0xd6700000-0xd6703fff 64bit]
[ 0.443207] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.443213] pci 0000:00:1b.0: PME# disabled
[ 0.443247] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.443337] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.443343] pci 0000:00:1c.0: PME# disabled
[ 0.443380] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.443469] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.443475] pci 0000:00:1c.1: PME# disabled
[ 0.443511] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[ 0.443600] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.443607] pci 0000:00:1c.2: PME# disabled
[ 0.443652] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.443735] pci 0000:00:1d.0: reg 20: [io 0x5080-0x509f]
[ 0.443818] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.443899] pci 0000:00:1d.1: reg 20: [io 0x5060-0x507f]
[ 0.443982] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.444073] pci 0000:00:1d.2: reg 20: [io 0x5040-0x505f]
[ 0.444167] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.444200] pci 0000:00:1d.7: reg 10: [mem 0xd6705800-0xd6705bff]
[ 0.444312] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.444319] pci 0000:00:1d.7: PME# disabled
[ 0.444350] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.444439] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.444601] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.444632] pci 0000:00:1f.2: reg 10: [io 0x50c8-0x50cf]
[ 0.444645] pci 0000:00:1f.2: reg 14: [io 0x50dc-0x50df]
[ 0.444659] pci 0000:00:1f.2: reg 18: [io 0x50c0-0x50c7]
[ 0.444672] pci 0000:00:1f.2: reg 1c: [io 0x50d8-0x50db]
[ 0.444685] pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
[ 0.444699] pci 0000:00:1f.2: reg 24: [mem 0xd6705000-0xd67057ff]
[ 0.444754] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.444760] pci 0000:00:1f.2: PME# disabled
[ 0.444788] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.444812] pci 0000:00:1f.3: reg 10: [mem 0xd6706000-0xd67060ff 64bit]
[ 0.444847] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
[ 0.444901] pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180
[ 0.444938] pci 0000:00:1f.6: reg 10: [mem 0xd6704000-0xd6704fff 64bit]
[ 0.445100] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.445111] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.445118] pci 0000:00:1c.0: bridge window [mem 0xd5700000-0xd66fffff]
[ 0.445128] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.445262] pci 0000:04:00.0: [8086:4232] type 0 class 0x000280
[ 0.445337] pci 0000:04:00.0: reg 10: [mem 0xd4600000-0xd4601fff 64bit]
[ 0.445563] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.445597] pci 0000:04:00.0: PME# disabled
[ 0.445742] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.445753] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.445760] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd56fffff]
[ 0.445770] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.445860] pci 0000:05:00.0: [1969:1063] type 0 class 0x000200
[ 0.445893] pci 0000:05:00.0: reg 10: [mem 0xd3500000-0xd353ffff 64bit]
[ 0.445911] pci 0000:05:00.0: reg 18: [io 0x1000-0x107f]
[ 0.446021] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.446029] pci 0000:05:00.0: PME# disabled
[ 0.452049] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.452060] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.452067] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd45fffff]
[ 0.452077] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.452170] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.452192] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.452196] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.452201] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.452205] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.452235] pci_bus 0000:00: on NUMA node 0
[ 0.452241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.452723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.452819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.452913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.453035] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.453045] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.453054] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.461827] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.461934] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.462037] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.462141] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.462243] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.462349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.462454] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.462555] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.462684] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.462684] vgaarb: loaded
[ 0.462684] vgaarb: bridge control possible 0000:00:02.0
[ 0.462684] PCI: Using ACPI for IRQ routing
[ 0.465462] PCI: pci_cache_line_size set to 64 bytes
[ 0.465627] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.465631] reserve RAM buffer: 00000000b9e74000 - 00000000bbffffff
[ 0.465638] reserve RAM buffer: 00000000b9f83000 - 00000000bbffffff
[ 0.465644] reserve RAM buffer: 00000000b9fe3000 - 00000000bbffffff
[ 0.465649] reserve RAM buffer: 00000000b9ffe000 - 00000000bbffffff
[ 0.465653] reserve RAM buffer: 00000000ba000000 - 00000000bbffffff
[ 0.465836] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.465852] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.465864] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.468053] Switching to clocksource hpet
[ 0.470910] pnp: PnP ACPI init
[ 0.470932] ACPI: bus type pnp registered
[ 0.471478] pnp 00:00: [bus 00-ff]
[ 0.471484] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.471488] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.471491] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.471496] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.471500] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.471504] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.471510] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.471514] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.471518] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.471522] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.471526] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.471530] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.471534] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.471538] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.471542] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.471546] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.471550] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.471554] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.471558] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.471651] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.471885] Switched to NOHz mode on CPU #0
[ 0.471957] Switched to NOHz mode on CPU #1
[ 0.572245] pnp 00:01: [io 0x002e-0x002f]
[ 0.572249] pnp 00:01: [io 0x004e-0x004f]
[ 0.572252] pnp 00:01: [io 0x164e-0x164f]
[ 0.572256] pnp 00:01: [io 0x0061]
[ 0.572259] pnp 00:01: [io 0x0070]
[ 0.572262] pnp 00:01: [io 0x0080]
[ 0.572265] pnp 00:01: [io 0x0092]
[ 0.572268] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.572271] pnp 00:01: [io 0x0063]
[ 0.572275] pnp 00:01: [io 0x0065]
[ 0.572278] pnp 00:01: [io 0x0067]
[ 0.572281] pnp 00:01: [io 0x0600-0x060f]
[ 0.572284] pnp 00:01: [io 0x0610]
[ 0.572288] pnp 00:01: [io 0x0800-0x080f]
[ 0.572291] pnp 00:01: [io 0x0810-0x0817]
[ 0.572294] pnp 00:01: [io 0x0820-0x0823]
[ 0.572297] pnp 00:01: [io 0x0400-0x047f]
[ 0.572301] pnp 00:01: [io 0x0500-0x057f]
[ 0.572304] pnp 00:01: [io 0x0068]
[ 0.572307] pnp 00:01: [io 0x006c]
[ 0.572311] pnp 00:01: [io 0xff2c-0xff2f]
[ 0.572314] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.572318] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.572321] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.572325] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.572329] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.572332] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.572336] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[ 0.572339] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.572375] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x2fff]
[ 0.572483] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.572492] system 00:01: [io 0x0610] has been reserved
[ 0.572500] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.572508] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.572516] system 00:01: [io 0x0820-0x0823] has been reserved
[ 0.572524] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.572532] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.572540] system 00:01: [io 0xff2c-0xff2f] has been reserved
[ 0.572549] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.572558] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.572566] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.572575] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.572584] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.572593] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.572601] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.572610] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.572619] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.572637] pnp 00:02: [io 0x0000-0x001f]
[ 0.572643] pnp 00:02: [io 0x0081-0x0091]
[ 0.572646] pnp 00:02: [io 0x0093-0x009f]
[ 0.572649] pnp 00:02: [io 0x00c0-0x00df]
[ 0.572653] pnp 00:02: [dma 4]
[ 0.572705] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.572745] pnp 00:03: [io 0x0070-0x0077]
[ 0.572798] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.572907] pnp 00:04: [irq 0 disabled]
[ 0.572918] pnp 00:04: [irq 8]
[ 0.572921] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.572975] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.572995] pnp 00:05: [io 0x00f0]
[ 0.573003] pnp 00:05: [irq 13]
[ 0.573058] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.573076] pnp 00:06: [mem 0xfff00000-0xffffffff]
[ 0.573129] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.573187] pnp 00:07: [io 0x0060]
[ 0.573191] pnp 00:07: [io 0x0064]
[ 0.573198] pnp 00:07: [irq 1]
[ 0.573253] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.573372] pnp 00:08: [irq 12]
[ 0.573433] pnp 00:08: Plug and Play ACPI device, IDs SYN1b36 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.573648] pnp: PnP ACPI: found 9 devices
[ 0.573655] ACPI: ACPI bus type pnp unregistered
[ 0.573662] PnPBIOS: Disabled by ACPI PNP
[ 0.612293] PCI: max bus depth: 1 pci_try_num: 2
[ 0.612343] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.612353] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.612365] pci 0000:00:1c.0: bridge window [mem 0xd5700000-0xd66fffff]
[ 0.612376] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.612392] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.612400] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.612412] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd56fffff]
[ 0.612423] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.612438] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.612447] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.612458] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd45fffff]
[ 0.612469] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.612484] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.612509] pci 0000:00:1c.0: enabling device (0001 -> 0003)
[ 0.612524] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.612536] pci 0000:00:1c.0: setting latency timer to 64
[ 0.612549] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.612560] pci 0000:00:1c.1: setting latency timer to 64
[ 0.612572] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.612582] pci 0000:00:1c.2: setting latency timer to 64
[ 0.612593] pci 0000:00:1e.0: setting latency timer to 64
[ 0.612599] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.612603] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.612607] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.612611] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.612615] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.612619] pci_bus 0000:02: resource 1 [mem 0xd5700000-0xd66fffff]
[ 0.612624] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.612628] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.612632] pci_bus 0000:04: resource 1 [mem 0xd4600000-0xd56fffff]
[ 0.612636] pci_bus 0000:04: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.612641] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff]
[ 0.612644] pci_bus 0000:05: resource 1 [mem 0xd3500000-0xd45fffff]
[ 0.612649] pci_bus 0000:05: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.612653] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.612657] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.612662] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.612666] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.612739] NET: Registered protocol family 2
[ 0.612912] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.613305] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.613895] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.614185] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.614193] TCP reno registered
[ 0.614200] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.614216] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.614519] NET: Registered protocol family 1
[ 0.614543] pci 0000:00:02.0: Boot video device
[ 2.212020] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.812021] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.812191] PCI: CLS 64 bytes, default 64
[ 3.812248] Unpacking initramfs...
[ 4.252323] Freeing initrd memory: 9800k freed
[ 4.257201] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 4.257213] Simple Boot Flag at 0x44 set to 0x1
[ 4.257829] audit: initializing netlink socket (disabled)
[ 4.257852] type=2000 audit(1325420786.252:1): initialized
[ 4.293554] highmem bounce pool size: 64 pages
[ 4.293568] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.307424] VFS: Disk quotas dquot_6.5.2
[ 4.307619] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.307855] msgmni has been set to 1686
[ 4.308175] alg: No test for stdrng (krng)
[ 4.308223] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.308235] io scheduler noop registered
[ 4.308241] io scheduler deadline registered
[ 4.308265] io scheduler cfq registered (default)
[ 4.308399] pcieport 0000:00:1c.0: setting latency timer to 64
[ 4.308467] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 4.308579] pcieport 0000:00:1c.1: setting latency timer to 64
[ 4.308642] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 4.308745] pcieport 0000:00:1c.2: setting latency timer to 64
[ 4.308808] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 4.309025] vesafb: mode is 640x480x16, linelength=1280, pages=0
[ 4.309033] vesafb: scrolling: redraw
[ 4.309040] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 4.309294] vesafb: framebuffer at 0xc0000000, mapped to 0xf8280000, using 640k, total 640k
[ 4.318081] Console: switching to colour frame buffer device 80x30
[ 4.326987] fb0: VESA VGA frame buffer device
[ 4.327197] intel_idle: MWAIT substates: 0x3122220
[ 4.327200] intel_idle: does not run on family 6 model 23
[ 4.327251] ERST: Table is not found!
[ 4.327407] GHES: HEST is not enabled!
[ 4.327583] isapnp: Scanning for PnP cards...
[ 4.638395] isapnp: No Plug & Play device found
[ 4.643678] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.650123] Linux agpgart interface v0.103
[ 4.655662] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 4.661305] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.674036] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 4.679816] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 4.685631] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 4.711565] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.717175] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.722783] mousedev: PS/2 mouse device common for all mice
[ 4.728291] rtc_cmos 00:03: RTC can wake from S4
[ 4.733924] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.739409] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.744848] cpuidle: using governor ladder
[ 4.750241] cpuidle: using governor menu
[ 4.755940] TCP cubic registered
[ 4.761341] NET: Registered protocol family 10
[ 4.766749] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.778595] Mobile IPv6
[ 4.783913] NET: Registered protocol family 17
[ 4.789686] Registering the dns_resolver key type
[ 4.794915] Using IPI No-Shortcut mode
[ 4.800217] PM: Hibernation image not present or could not be loaded.
[ 4.800236] registered taskstats version 1
[ 4.816356] rtc_cmos 00:03: setting system clock to 2012-01-01 12:26:27 UTC (1325420787)
[ 4.827063] Initializing network drop monitor service
[ 4.832667] Freeing unused kernel memory: 408k freed
[ 4.838281] Write protecting the kernel text: 2768k
[ 4.843705] Write protecting the kernel read-only data: 1092k
[ 4.849030] NX-protecting the kernel data: 3376k
[ 4.878814] udevd[48]: starting version 175
[ 4.939403] usbcore: registered new interface driver usbfs
[ 4.957168] atl1c 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.966232] SCSI subsystem initialized
[ 4.975563] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.980776] ACPI: Thermal Zone [TZ01] (52 C)
[ 4.994091] usbcore: registered new interface driver hub
[ 5.016282] atl1c 0000:05:00.0: setting latency timer to 64
[ 5.023093] usbcore: registered new device driver usb
[ 5.029755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.035208] libata version 3.00 loaded.
[ 5.036397] ahci 0000:00:1f.2: version 3.0
[ 5.036423] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.041913] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 5.041965] ahci: SSS flag set, parallel bus scan disabled
[ 5.047375] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 5.058470] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs
[ 5.070022] ahci 0000:00:1f.2: setting latency timer to 64
[ 5.076668] scsi0 : ahci
[ 5.082300] scsi1 : ahci
[ 5.087814] scsi2 : ahci
[ 5.093219] scsi3 : ahci
[ 5.098627] ata1: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705100 irq 43
[ 5.109353] ata2: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705180 irq 43
[ 5.109357] ata3: DUMMY
[ 5.109359] ata4: DUMMY
[ 5.109426] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 5.109454] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.109459] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.109526] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.109569] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.113460] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 5.113481] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xd6705c00
[ 5.120028] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.120062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.120066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.120070] usb usb1: Product: EHCI Host Controller
[ 5.120072] usb usb1: Manufacturer: Linux 3.1.0-1-686-pae ehci_hcd
[ 5.120075] usb usb1: SerialNumber: 0000:00:1a.7
[ 5.120253] hub 1-0:1.0: USB hub found
[ 5.120261] hub 1-0:1.0: 2 ports detected
[ 5.120377] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.120397] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.120402] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.120418] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.120460] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.124355] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5.124378] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd6705800
[ 5.137307] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
[ 5.140024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.140074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.140078] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.140082] usb usb2: Product: EHCI Host Controller
[ 5.140085] usb usb2: Manufacturer: Linux 3.1.0-1-686-pae ehci_hcd
[ 5.140088] usb usb2: SerialNumber: 0000:00:1d.7
[ 5.140250] hub 2-0:1.0: USB hub found
[ 5.140256] hub 2-0:1.0: 6 ports detected
[ 5.291044] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.296353] Refined TSC clocksource calibration: 1296.749 MHz.
[ 5.301552] Switching to clocksource tsc
[ 5.301568] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.301580] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.301585] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.301599] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.301647] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050a0
[ 5.301697] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.301701] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.301705] usb usb3: Product: UHCI Host Controller
[ 5.301708] usb usb3: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 5.301711] usb usb3: SerialNumber: 0000:00:1a.0
[ 5.366167] hub 3-0:1.0: USB hub found
[ 5.371645] hub 3-0:1.0: 2 ports detected
[ 5.377157] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.382676] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.382681] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.388119] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 5.399073] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
[ 5.404718] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.410379] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.421456] usb usb4: Product: UHCI Host Controller
[ 5.427049] usb usb4: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 5.432707] usb usb4: SerialNumber: 0000:00:1d.0
[ 5.438473] hub 4-0:1.0: USB hub found
[ 5.444058] hub 4-0:1.0: 2 ports detected
[ 5.449759] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.455498] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.455505] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.461108] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 5.472149] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
[ 5.477890] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.483685] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.494880] usb usb5: Product: UHCI Host Controller
[ 5.500497] usb usb5: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 5.506185] usb usb5: SerialNumber: 0000:00:1d.1
[ 5.511884] hub 5-0:1.0: USB hub found
[ 5.512020] usb 1-2: new high speed USB device number 2 using ehci_hcd
[ 5.523004] hub 5-0:1.0: 2 ports detected
[ 5.528671] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 5.534457] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.534462] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.540246] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 5.551678] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005040
[ 5.557598] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.563492] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.574940] usb usb6: Product: UHCI Host Controller
[ 5.580731] usb usb6: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 5.586492] usb usb6: SerialNumber: 0000:00:1d.2
[ 5.592342] hub 6-0:1.0: USB hub found
[ 5.597976] hub 6-0:1.0: 2 ports detected
[ 5.685897] usb 1-2: New USB device found, idVendor=04f2, idProduct=b175
[ 5.691636] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 5.697484] usb 1-2: Product: CNF9011
[ 5.703183] usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
[ 5.708992] usb 1-2: SerialNumber: SN0001
[ 5.776028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.783619] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC60F, max UDMA/133
[ 5.789422] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.796324] ata1.00: configured for UDMA/133
[ 5.802279] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[ 6.096015] usb 4-1: new low speed USB device number 2 using uhci_hcd
[ 6.281717] usb 4-1: New USB device found, idVendor=045e, idProduct=0737
[ 6.287640] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.293599] usb 4-1: Product: Compact Optical Mouse 500
[ 6.299503] usb 4-1: Manufacturer: Microsoft
[ 6.304025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.308085] ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, AP04, max UDMA/133
[ 6.320643] ata2.00: configured for UDMA/133
[ 6.331259] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N AP04 PQ: 0 ANSI: 5
[ 6.357498] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 6.369650] sd 0:0:0:0: [sda] Write Protect is off
[ 6.369927] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input1
[ 6.387616] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.387718] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.0-1/input0
[ 6.387808] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.413567] usbcore: registered new interface driver usbhid
[ 6.420208] usbhid: USB HID core driver
[ 6.463963] sda: sda1 sda2 < sda5 >
[ 6.470977] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.483373] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.496389] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.504626] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.889873] PM: Starting manual resume from disk
[ 6.902745] PM: Hibernation image partition 8:5 present
[ 6.902748] PM: Looking for hibernation image.
[ 6.902909] PM: Image not found (code -22)
[ 6.902912] PM: Hibernation image not present or could not be loaded.
[ 6.978410] kjournald starting. Commit interval 5 seconds
[ 6.978604] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 9.482478] udevd[264]: starting version 175
[ 10.938174] ACPI: acpi_idle registered with cpuidle
[ 10.938914] Monitor-Mwait will be used to enter C-1 state
[ 10.939120] Monitor-Mwait will be used to enter C-2 state
[ 10.939164] Monitor-Mwait will be used to enter C-3 state
[ 10.939174] Marking TSC unstable due to TSC halts in idle
[ 10.951526] Switching to clocksource hpet
[ 11.125029] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input2
[ 11.137895] ACPI: Power Button [PWRB]
[ 11.144039] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input3
[ 11.156668] ACPI: Lid Switch [LID0]
[ 11.164584] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input4
[ 11.178193] ACPI: Sleep Button [SLPB]
[ 11.184586] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 11.197383] ACPI: Power Button [PWRF]
[ 11.234995] wmi: Mapper loaded
[ 11.295717] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 11.646228] cfg80211: Calling CRDA to update world regulatory domain
[ 11.729430] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 11.739128] acer_wmi: Brightness must be controlled by generic video driver
[ 11.870120] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.913030] [drm] Initialized drm 1.1.0 20060810
[ 12.001008] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 12.018873] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 12.025498] Copyright(c) 2003-2011 Intel Corporation
[ 12.032734] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.032975] iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 12.033014] iwlagn 0000:04:00.0: setting latency timer to 64
[ 12.033064] iwlagn 0000:04:00.0: pci_resource_len = 0x00002000
[ 12.033067] iwlagn 0000:04:00.0: pci_resource_base = f8234000
[ 12.033070] iwlagn 0000:04:00.0: HW Revision ID = 0x0
[ 12.033335] iwlagn 0000:04:00.0: irq 44 for MSI/MSI-X
[ 12.033454] iwlagn 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 12.033614] iwlagn 0000:04:00.0: L1 Enabled; Disabling L0S
[ 12.053641] iwlagn 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4
[ 12.053644] iwlagn 0000:04:00.0: Device SKU: 0Xf0
[ 12.097082] i915 0000:00:02.0: setting latency timer to 64
[ 12.098504] iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 12.152571] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 12.152584] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.152735] ACPI: AC Adapter [AC] (on-line)
[ 12.154579] [drm] Driver supports precise vblank timestamp query.
[ 12.155647] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
[ 12.166679] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 12.238348] iTCO_vendor_support: vendor-support=0
[ 12.258061] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 12.259178] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 12.260720] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.352038] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 12.530068] usb 3-1: New USB device found, idVendor=0489, idProduct=e011
[ 12.531075] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 12.532071] usb 3-1: Product: Acer Module
[ 12.533027] usb 3-1: Manufacturer: Broadcom Corp
[ 12.533969] usb 3-1: SerialNumber: C0CB38DF93E2
[ 12.569473] iwlagn 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692
[ 12.570925] Registered led device: phy0-led
[ 12.628460] checking generic (c0000000 a0000) vs hw (c0000000 10000000)
[ 12.628466] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 12.630343] Console: switching to colour dummy device 80x25
[ 12.630673] fbcon: inteldrmfb (fb0) is primary device
[ 12.630782] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
[ 12.632238] render error detected, EIR: 0x00000010
[ 12.632241] IPEIR: 0x00000000
[ 12.632243] IPEHR: 0x00000000
[ 12.632246] INSTDONE: 0xfffffffe
[ 12.632248] INSTPS: 0x00000000
[ 12.632250] INSTDONE1: 0xffffffff
[ 12.632252] ACTHD: 0x00000000
[ 12.632255] page table error
[ 12.632257] PGTBL_ER: 0x00000001
[ 12.632262] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[ 12.935749] Linux media interface: v0.10
[ 12.984063] Console: switching to colour frame buffer device 170x48
[ 12.991862] fb0: inteldrmfb frame buffer device
[ 12.991865] drm: registered panic notifier
[ 13.211375] Bluetooth: Core ver 2.16
[ 13.211456] NET: Registered protocol family 31
[ 13.211509] Bluetooth: HCI device and connection manager initialized
[ 13.211582] Bluetooth: HCI socket layer initialized
[ 13.211638] Bluetooth: L2CAP socket layer initialized
[ 13.211700] Bluetooth: SCO socket layer initialized
[ 13.271902] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 13.296167] acpi device:07: registered as cooling_device2
[ 13.296501] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 13.299105] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 13.301691] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.856257] ACPI: Battery Slot [BAT0] (battery present)
[ 13.867976] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 13.969495] Linux video capture interface: v2.00
[ 14.019076] uvcvideo: Found UVC 1.00 device CNF9011 (04f2:b175)
[ 14.037963] input: CNF9011 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
[ 14.040645] usbcore: registered new interface driver uvcvideo
[ 14.043116] USB Video Class driver (1.1.1)
[ 14.326128] Intel AES-NI instructions are not detected.
[ 14.560770] padlock_aes: VIA PadLock not detected.
[ 14.574367] usbcore: registered new interface driver btusb
[ 14.908339] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.911106] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 14.911150] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 15.139598] hda_codec: ALC269: BIOS auto-probing.
[ 15.143852] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 15.160835] HDMI status: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 15.165913] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.168645] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 15.171390] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 16.234398] Adding 5892092k swap on /dev/sda5. Priority:-1 extents:1 across:5892092k
[ 16.425602] EXT3-fs (sda1): using internal journal
[ 16.571708] loop: module loaded
[ 18.473714] RPC: Registered named UNIX socket transport module.
[ 18.476404] RPC: Registered udp transport module.
[ 18.479088] RPC: Registered tcp transport module.
[ 18.481755] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 18.625810] FS-Cache: Loaded
[ 18.702002] FS-Cache: Netfs 'nfs' registered for caching
[ 18.722297] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.262655] fuse init (API version 7.17)
[ 22.225932] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 22.228673] DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
[ 22.231086] NET: Registered protocol family 12
[ 22.436282] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 22.483234] atl1c 0000:05:00.0: irq 47 for MSI/MSI-X
[ 22.544618] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.977546] iwlagn 0000:04:00.0: L1 Enabled; Disabling L0S
[ 28.982902] iwlagn 0000:04:00.0: Radio type=0x1-0x2-0x0
[ 29.101174] iwlagn 0000:04:00.0: L1 Enabled; Disabling L0S
[ 29.106553] iwlagn 0000:04:00.0: Radio type=0x1-0x2-0x0
[ 29.156050] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 37.051228] apm: BIOS not found.
[ 38.053291] wlan0: authenticate with 00:14:d1:e2:a4:b8 (try 1)
[ 38.055309] wlan0: authenticated
[ 38.060017] wlan0: associate with 00:14:d1:e2:a4:b8 (try 1)
[ 38.064132] wlan0: RX AssocResp from 00:14:d1:e2:a4:b8 (capab=0x11 status=0 aid=8)
[ 38.064137] wlan0: associated
[ 38.069307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 40.577287] Bluetooth: RFCOMM TTY layer initialized
[ 40.577295] Bluetooth: RFCOMM socket layer initialized
[ 40.577298] Bluetooth: RFCOMM ver 1.11
[ 40.577521] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 40.577525] Bluetooth: BNEP filters: protocol multicast
[ 49.888105] wlan0: no IPv6 routers present
[ 93.349063] postgres (2187): /proc/2187/oom_adj is deprecated, please use /proc/2187/oom_score_adj instead.
[ 306.448294] usb 4-1: USB disconnect, device number 2
[ 307.928066] usb 4-1: new low speed USB device number 3 using uhci_hcd
[ 308.107769] usb 4-1: New USB device found, idVendor=045e, idProduct=0737
[ 308.111215] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 308.114622] usb 4-1: Product: Compact Optical Mouse 500
[ 308.117979] usb 4-1: Manufacturer: Microsoft
[ 308.147966] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input15
[ 308.151551] generic-usb 0003:045E:0737.0002: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.0-1/input0
[ 33.740]
X.Org X Server 1.11.2.902 (1.11.3 RC 2)
Release Date: 2011-12-09
[ 33.740] X Protocol Version 11, Revision 0
[ 33.740] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 33.740] Current Operating System: Linux alanz-laptop 3.1.0-1-686-pae #1 SMP Sun Dec 11 20:40:16 UTC 2011 i686
[ 33.740] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=7910f557-5c71-42d1-bfd8-4ff17af1d3fd ro vga=785
[ 33.740] Build Date: 11 December 2011 11:26:25AM
[ 33.740] xorg-server 2:1.11.2.902-1 (Cyril Brulebois <kibi@debian.org>)
[ 33.740] Current version of pixman: 0.24.0
[ 33.740] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 33.740] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33.740] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 1 14:26:56 2012
[ 33.954] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 34.036] (==) No Layout section. Using the first Screen section.
[ 34.036] (==) No screen section available. Using defaults.
[ 34.036] (**) |-->Screen "Default Screen Section" (0)
[ 34.036] (**) | |-->Monitor "<default monitor>"
[ 34.071] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 34.071] (==) Automatically adding devices
[ 34.071] (==) Automatically enabling devices
[ 34.235] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 34.235] Entry deleted from font path.
[ 34.420] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 34.420] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 34.420] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 34.439] (II) Loader magic: 0xb7724580
[ 34.439] (II) Module ABI versions:
[ 34.439] X.Org ANSI C Emulation: 0.4
[ 34.439] X.Org Video Driver: 11.0
[ 34.439] X.Org XInput driver : 13.0
[ 34.439] X.Org Server Extension : 6.0
[ 34.440] (--) PCI:*(0:0:2:0) 8086:2a42:1025:034b rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000050d0/8
[ 34.440] (--) PCI: (0:0:2:1) 8086:2a43:1025:034b rev 7, Mem @ 0xd3400000/1048576
[ 34.440] (II) Open ACPI successful (/var/run/acpid.socket)
[ 34.440] (II) LoadModule: "extmod"
[ 34.537] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 34.546] (II) Module extmod: vendor="X.Org Foundation"
[ 34.546] compiled for 1.11.2.902, module version = 1.0.0
[ 34.546] Module class: X.Org Server Extension
[ 34.546] ABI class: X.Org Server Extension, version 6.0
[ 34.546] (II) Loading extension SELinux
[ 34.546] (II) Loading extension MIT-SCREEN-SAVER
[ 34.546] (II) Loading extension XFree86-VidModeExtension
[ 34.546] (II) Loading extension XFree86-DGA
[ 34.546] (II) Loading extension DPMS
[ 34.546] (II) Loading extension XVideo
[ 34.546] (II) Loading extension XVideo-MotionCompensation
[ 34.546] (II) Loading extension X-Resource
[ 34.546] (II) LoadModule: "dbe"
[ 34.547] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 34.547] (II) Module dbe: vendor="X.Org Foundation"
[ 34.547] compiled for 1.11.2.902, module version = 1.0.0
[ 34.547] Module class: X.Org Server Extension
[ 34.547] ABI class: X.Org Server Extension, version 6.0
[ 34.547] (II) Loading extension DOUBLE-BUFFER
[ 34.547] (II) LoadModule: "glx"
[ 34.548] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 34.680] (II) Module glx: vendor="X.Org Foundation"
[ 34.680] compiled for 1.11.2.902, module version = 1.0.0
[ 34.680] ABI class: X.Org Server Extension, version 6.0
[ 34.680] (==) AIGLX enabled
[ 34.680] (II) Loading extension GLX
[ 34.680] (II) LoadModule: "record"
[ 34.681] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 34.681] (II) Module record: vendor="X.Org Foundation"
[ 34.681] compiled for 1.11.2.902, module version = 1.13.0
[ 34.681] Module class: X.Org Server Extension
[ 34.681] ABI class: X.Org Server Extension, version 6.0
[ 34.681] (II) Loading extension RECORD
[ 34.681] (II) LoadModule: "dri"
[ 34.682] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 34.782] (II) Module dri: vendor="X.Org Foundation"
[ 34.782] compiled for 1.11.2.902, module version = 1.0.0
[ 34.782] ABI class: X.Org Server Extension, version 6.0
[ 34.782] (II) Loading extension XFree86-DRI
[ 34.782] (II) LoadModule: "dri2"
[ 34.783] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 34.783] (II) Module dri2: vendor="X.Org Foundation"
[ 34.783] compiled for 1.11.2.902, module version = 1.2.0
[ 34.783] ABI class: X.Org Server Extension, version 6.0
[ 34.783] (II) Loading extension DRI2
[ 34.783] (==) Matched intel as autoconfigured driver 0
[ 34.783] (==) Matched vesa as autoconfigured driver 1
[ 34.783] (==) Matched fbdev as autoconfigured driver 2
[ 34.783] (==) Assigned the driver to the xf86ConfigLayout
[ 34.783] (II) LoadModule: "intel"
[ 34.784] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 34.942] (II) Module intel: vendor="X.Org Foundation"
[ 34.942] compiled for 1.11.1.902, module version = 2.17.0
[ 34.942] Module class: X.Org Video Driver
[ 34.942] ABI class: X.Org Video Driver, version 11.0
[ 34.942] (II) LoadModule: "vesa"
[ 34.942] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 35.070] (II) Module vesa: vendor="X.Org Foundation"
[ 35.070] compiled for 1.11.0, module version = 2.3.0
[ 35.070] Module class: X.Org Video Driver
[ 35.070] ABI class: X.Org Video Driver, version 11.0
[ 35.070] (II) LoadModule: "fbdev"
[ 35.070] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 35.070] (II) Module fbdev: vendor="X.Org Foundation"
[ 35.070] compiled for 1.11.0, module version = 0.4.2
[ 35.070] ABI class: X.Org Video Driver, version 11.0
[ 35.070] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 35.072] (II) VESA: driver for VESA chipsets: vesa
[ 35.072] (II) FBDEV: driver for framebuffer: fbdev
[ 35.072] (++) using VT number 7

[ 35.214] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 35.214] (WW) Falling back to old probe method for vesa
[ 35.214] (WW) Falling back to old probe method for fbdev
[ 35.214] (II) Loading sub module "fbdevhw"
[ 35.214] (II) LoadModule: "fbdevhw"
[ 35.301] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 35.320] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 35.320] compiled for 1.11.2.902, module version = 0.0.2
[ 35.320] ABI class: X.Org Video Driver, version 11.0
[ 35.320] drmOpenDevice: node name is /dev/dri/card0
[ 35.320] drmOpenDevice: open result is 9, (OK)
[ 35.320] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 35.320] drmOpenDevice: node name is /dev/dri/card0
[ 35.320] drmOpenDevice: open result is 9, (OK)
[ 35.320] drmOpenByBusid: drmOpenMinor returns 9
[ 35.320] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 35.320] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 35.320] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 35.320] (==) intel(0): RGB weight 888
[ 35.320] (==) intel(0): Default visual is TrueColor
[ 35.320] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 35.320] (--) intel(0): Chipset: "GM45"
[ 35.320] (**) intel(0): Relaxed fencing enabled
[ 35.321] (**) intel(0): Wait on SwapBuffers? enabled
[ 35.321] (**) intel(0): Triple buffering? enabled
[ 35.321] (**) intel(0): Framebuffer tiled
[ 35.321] (**) intel(0): Pixmaps tiled
[ 35.321] (**) intel(0): 3D buffers tiled
[ 35.321] (**) intel(0): SwapBuffers wait enabled
[ 35.321] (==) intel(0): video overlay key set to 0x101fe
[ 35.321] (II) intel(0): Output LVDS1 has no monitor section
[ 35.420] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 35.452] (II) intel(0): Output VGA1 has no monitor section
[ 35.471] (II) intel(0): Output HDMI1 has no monitor section
[ 35.471] (II) intel(0): Output DP1 has no monitor section
[ 35.520] (II) intel(0): Output DP2 has no monitor section
[ 35.520] (II) intel(0): EDID for output LVDS1
[ 35.520] (II) intel(0): Manufacturer: AUO Model: 205c Serial#: 0
[ 35.520] (II) intel(0): Year: 2008 Week: 1
[ 35.520] (II) intel(0): EDID Version: 1.3
[ 35.520] (II) intel(0): Digital Display Input
[ 35.520] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
[ 35.520] (II) intel(0): Gamma: 2.20
[ 35.520] (II) intel(0): No DPMS capabilities specified
[ 35.520] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 35.520] (II) intel(0): First detailed timing is preferred mode
[ 35.520] (II) intel(0): redX: 0.584 redY: 0.333 greenX: 0.338 greenY: 0.571
[ 35.520] (II) intel(0): blueX: 0.158 blueY: 0.133 whiteX: 0.313 whiteY: 0.
 

Thread Tools




All times are GMT. The time now is 05:14 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org