FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 12-11-2011, 05:22 PM
Felipe Salvador
 
Default Bug#651723: more info

I don't know if it is important but with or without
CONFIG_PREVENT_FIRMWARE_BUILD make no difference on debian source.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.1.4-01 (3.1.4) (root@atahualpa) (gcc version 4.6.2 (Debian 4.6.2-7) ) #1 SMP PREEMPT Sun Dec 11 17:58:06 CET 2011
Command line: BOOT_IMAGE=/vmlinuz-3.1.4-01 root=UUID=e03d479b-b9ad-41d9-871c-d381cb6bdba2 ro pci=nomsi radeon.modeset=1 radeon.agpmode=-1 radeon.hw_i2c=1 quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: System manufacturer System Product Name/M2V, BIOS 2101 02/21/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000007ffb0000
0000000000 - 007fe00000 page 2M
007fe00000 - 007ffb0000 page 4k
kernel direct mapping tables up to 7ffb0000 @ 1fffc000-20000000
RAMDISK: 37916000 - 37c83000
ACPI: RSDP 00000000000fa960 00024 (v02 ACPIAM)
ACPI: XSDT 000000007ffb0100 0004C (v01 A_M_I_ OEMXSDT 02000821 MSFT 00000097)
ACPI: FACP 000000007ffb0290 000F4 (v03 A_M_I_ OEMFACP 02000821 MSFT 00000097)
ACPI: DSDT 000000007ffb05c0 04E3F (v01 A0498 A0498000 00000000 INTL 20060113)
ACPI: FACS 000000007ffbe000 00040
ACPI: APIC 000000007ffb0390 00068 (v01 A_M_I_ OEMAPIC 02000821 MSFT 00000097)
ACPI: MCFG 000000007ffb0400 0003C (v01 A_M_I_ OEMMCFG 02000821 MSFT 00000097)
ACPI: OEMB 000000007ffbe040 00060 (v01 A_M_I_ AMI_OEM 02000821 MSFT 00000097)
ACPI: HPET 000000007ffb5400 00038 (v01 A_M_I_ OEMHPET 02000821 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000007ffb0000
Initmem setup node 0 0000000000000000-000000007ffb0000
NODE_DATA [000000007ffab000 - 000000007ffaffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffb0
On node 0 totalpages: 524095
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 8127 pages used for memmap
DMA32 zone: 511985 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88007fc00000 s70016 r8192 d24192 u1048576
pcpu-alloc: s70016 r8192 d24192 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515899
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.1.4-01 root=UUID=e03d479b-b9ad-41d9-871c-d381cb6bdba2 ro pci=nomsi radeon.modeset=1 radeon.agpmode=-1 radeon.hw_i2c=1 quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 488e000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 2051088k/2096832k available (4996k kernel code, 452k absent, 45292k reserved, 2483k data, 604k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:512 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
HPET config register value = 0xFFFFFFFF. Disabling HPET
Fast TSC calibration using PIT
Detected 2835.346 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5670.69 BogoMIPS (lpj=2835346)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
MCE: In-kernel MCE decoding enabled.
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9a000
Brought up 2 CPUs
Total of 2 processors activated (11339.48 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 7ffbe000 (139264 bytes)
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, ffffffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x80000000-0xfcffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff37ffff]
pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d3fff])
pci 0000:00:00.0: [1106:0351] type 0 class 0x000600
pci 0000:00:00.1: [1106:1351] type 0 class 0x000600
pci 0000:00:00.2: [1106:2351] type 0 class 0x000600
pci 0000:00:00.3: [1106:3351] type 0 class 0x000600
pci 0000:00:00.4: [1106:4351] type 0 class 0x000600
pci 0000:00:00.5: [1106:5351] type 0 class 0x000800
pci 0000:00:00.6: [1106:6238] type 0 class 0x000600
pci 0000:00:00.7: [1106:7351] type 0 class 0x000600
pci 0000:00:01.0: [1106:b999] type 1 class 0x000604
pci 0000:00:02.0: [1106:a238] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: [1106:c238] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.1: [1106:d238] type 1 class 0x000604
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PME# disabled
pci 0000:00:03.2: [1106:e238] type 1 class 0x000604
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: [1106:f238] type 1 class 0x000604
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:0f.0: [1106:0591] type 0 class 0x000101
pci 0000:00:0f.0: reg 10: [io 0xcc00-0xcc07]
pci 0000:00:0f.0: reg 14: [io 0xc880-0xc883]
pci 0000:00:0f.0: reg 18: [io 0xc800-0xc807]
pci 0000:00:0f.0: reg 1c: [io 0xc480-0xc483]
pci 0000:00:0f.0: reg 20: [io 0xc400-0xc40f]
pci 0000:00:0f.0: reg 24: [io 0xc000-0xc0ff]
pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.0: reg 20: [io 0xb480-0xb49f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.1: reg 20: [io 0xb800-0xb81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.2: reg 20: [io 0xb880-0xb89f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.3: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
pci 0000:00:10.4: reg 10: [mem 0xfbcffc00-0xfbcffcff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
pci 0000:00:11.0: [1106:3337] type 0 class 0x000601
pci 0000:00:11.7: [1106:287e] type 0 class 0x000600
pci 0000:00:13.0: [1106:337b] type 1 class 0x000604
pci 0000:00:13.1: [1106:337a] type 1 class 0x000604
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: [1002:7288] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xfbde0000-0xfbdeffff 64bit]
pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:72a8] type 0 class 0x000380
pci 0000:02:00.1: reg 10: [mem 0xfbdf0000-0xfbdfffff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06-06]
pci 0000:00:03.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 05-05]
pci 0000:00:03.1: bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
pci 0000:00:03.2: PCI bridge to [bus 04-04]
pci 0000:00:03.2: bridge window [mem 0xfad00000-0xfadfffff 64bit pref]
pci 0000:00:03.3: PCI bridge to [bus 03-03]
pci 0000:00:03.3: bridge window [mem 0xfac00000-0xfacfffff 64bit pref]
pci 0000:80:01.0: [1106:3288] type 0 class 0x000403
pci 0000:80:01.0: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: PME# disabled
pci 0000:80:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:13.0: PCI bridge to [bus 80-80]
pci 0000:00:13.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:07:08.0: [1095:3512] type 0 class 0x000104
pci 0000:07:08.0: reg 10: [io 0xec00-0xec07]
pci 0000:07:08.0: reg 14: [io 0xe880-0xe883]
pci 0000:07:08.0: reg 18: [io 0xe800-0xe807]
pci 0000:07:08.0: reg 1c: [io 0xe480-0xe483]
pci 0000:07:08.0: reg 20: [io 0xe400-0xe40f]
pci 0000:07:08.0: reg 24: [mem 0xfbeffc00-0xfbeffdff]
pci 0000:07:08.0: reg 30: [mem 0xfbe00000-0xfbe7ffff pref]
pci 0000:07:08.0: supports D1 D2
pci 0000:00:13.1: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:13.1: bridge window [io 0xe000-0xefff]
pci 0000:00:13.1: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:13.1: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:13.1: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:13.1: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:13.1: bridge window [mem 0x80000000-0xff37ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks= none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 000000007ffb0000 - 000000007fffffff
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x80000000-0xff37ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0061]
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: [io 0x00f0-0x00ff]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x03f0-0x03f5]
pnp 00:04: [io 0x03f7]
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [io 0x0378-0x037f]
pnp 00:05: [irq 7]
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0c00-0x0c0f]
pnp 00:06: [io 0x0d00-0x0d0f]
pnp 00:06: [io 0x0a20-0x0a2f]
pnp 00:06: [io 0x0a30-0x0a3f]
system 00:06: [io 0x0c00-0x0c0f] has been reserved
system 00:06: [io 0x0d00-0x0d0f] has been reserved
system 00:06: [io 0x0a20-0x0a2f] has been reserved
system 00:06: [io 0x0a30-0x0a3f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x005f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x03e0-0x03e7]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x0800-0x087f]
pnp 00:08: [io 0x0400-0x041f]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
system 00:08: [io 0x03e0-0x03e7] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0400-0x041f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0070-0x0071]
pnp 00:09: [irq 8]
pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io 0x0060]
pnp 00:0c: [io 0x0064]
pnp 00:0c: [irq 1]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0d: [irq 12]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0e: [mem 0xe0000000-0xefffffff]
system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [mem 0x00000000-0x0009ffff]
pnp 00:0f: [mem 0x000c0000-0x000cffff]
pnp 00:0f: [mem 0x000e0000-0x000fffff]
pnp 00:0f: [mem 0x00100000-0x7fffffff]
pnp 00:0f: [mem 0xff380000-0xffffffff]
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0f: [mem 0xff380000-0xffffffff] could not be reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:03.3: BAR 14: assigned [mem 0x80000000-0x803fffff]
pci 0000:00:03.3: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:03.2: BAR 14: assigned [mem 0x80400000-0x807fffff]
pci 0000:00:03.2: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:03.1: BAR 14: assigned [mem 0x80800000-0x80bfffff]
pci 0000:00:03.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:03.0: BAR 14: assigned [mem 0x80c00000-0x80ffffff]
pci 0000:00:03.0: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06-06]
pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:03.0: bridge window [mem 0x80c00000-0x80ffffff]
pci 0000:00:03.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 05-05]
pci 0000:00:03.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:03.1: bridge window [mem 0x80800000-0x80bfffff]
pci 0000:00:03.1: bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
pci 0000:00:03.2: PCI bridge to [bus 04-04]
pci 0000:00:03.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.2: bridge window [mem 0x80400000-0x807fffff]
pci 0000:00:03.2: bridge window [mem 0xfad00000-0xfadfffff 64bit pref]
pci 0000:00:03.3: PCI bridge to [bus 03-03]
pci 0000:00:03.3: bridge window [io 0x1000-0x1fff]
pci 0000:00:03.3: bridge window [mem 0x80000000-0x803fffff]
pci 0000:00:03.3: bridge window [mem 0xfac00000-0xfacfffff 64bit pref]
pci 0000:00:13.0: PCI bridge to [bus 80-80]
Switched to NOHz mode on CPU #0
pci 0000:00:13.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:13.1: PCI bridge to [bus 07-07]
pci 0000:00:13.1: bridge window [io 0xe000-0xefff]
pci 0000:00:13.1: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: enabling device (0106 -> 0107)
pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.1: enabling device (0106 -> 0107)
pci 0000:00:03.1: PCI INT B -> GSI 35 (level, low) -> IRQ 35
pci 0000:00:03.1: setting latency timer to 64
pci 0000:00:03.2: enabling device (0106 -> 0107)
pci 0000:00:03.2: PCI INT C -> GSI 39 (level, low) -> IRQ 39
pci 0000:00:03.2: setting latency timer to 64
pci 0000:00:03.3: enabling device (0106 -> 0107)
pci 0000:00:03.3: PCI INT D -> GSI 43 (level, low) -> IRQ 43
Switched to NOHz mode on CPU #1
pci 0000:00:03.3: setting latency timer to 64
pci 0000:00:13.0: setting latency timer to 64
pci 0000:00:13.1: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xff37ffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0x80c00000-0x80ffffff]
pci_bus 0000:06: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0x80800000-0x80bfffff]
pci_bus 0000:05: resource 2 [mem 0xfae00000-0xfaefffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0x80400000-0x807fffff]
pci_bus 0000:04: resource 2 [mem 0xfad00000-0xfadfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0x80000000-0x803fffff]
pci_bus 0000:03: resource 2 [mem 0xfac00000-0xfacfffff 64bit pref]
pci_bus 0000:80: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x80000000-0xff37ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3508k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1323626799.203:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
DLM installed
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.17)
msgmni has been set to 4012
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.1: setting latency timer to 64
pcieport 0000:00:03.2: setting latency timer to 64
pcieport 0000:00:03.3: setting latency timer to 64
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
radeon 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
radeon 0000:02:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV570 0x1002:0x7288 0x174B:0xE190).
radeon 0000:02:00.0: PCI: Disallowing DAC for device
radeon: No suitable DMA available.
[drm] register mmio base: 0xFBDE0000
[drm] register mmio size: 65536
ATOM BIOS: 113
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:02:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 1027298 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 3 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x00040000).
radeon 0000:02:00.0: WB enabled
[drm] Loading R500 Microcode
radeon_cp: Failed to load firmware "radeon/R520_cp.bin"
[drm:r100_cp_init] *ERROR* Failed to load firmware!
radeon 0000:02:00.0: failed initializing CP (-2).
radeon 0000:02:00.0: Disabling GPU acceleration
[drm] radeon: cp finalized
radeon 0000:02:00.0: ffff88007a859000 unpin not necessary
failed to evaluate ATIF got AE_BAD_PARAMETER
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I
[drm] HPD2
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP3: INTERNAL_LVTM1
[drm] Connector 1:
[drm] S-video
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] DFP1: INTERNAL_KLDSCP_TMDS1
[drm] Radeon display connector DVI-I-1: Found valid EDID
[drm] Radeon display connector DVI-I-2: No monitor connected or invalid EDID
[drm] Possible lm64 thermal controller at 0x4c
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.11.0 20080528 for 0000:02:00.0 on minor 0
IT8712 SuperIO detected.
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
loop: module loaded
Loading iSCSI transport class v2.0-870.
sata_sil 0000:07:08.0: version 2.4
sata_sil 0000:07:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xfbeffc00 tf 0xfbeffc80 irq 18
ata2: SATA max UDMA/100 mmio m512@0xfbeffc00 tf 0xfbeffcc0 irq 18
sata_via 0000:00:0f.0: version 2.6
sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi2 : sata_via
scsi3 : sata_via
ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21
ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21
pata_via 0000:00:0f.1: version 0.3.4
scsi4 : pata_via
scsi5 : pata_via
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
Solarflare NET driver v3.1
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbcffc00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.1.4-01 ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b480
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.1.4-01 uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.1.4-01 uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.1.4-01 uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 23, io base 0x0000bc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.1.4-01 uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input3
rtc_cmos 00:09: RTC can wake from S4
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
i2c /dev entries driver
md: raid0 personality registered for level 0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP veno registered
TCP scalable registered
TCP lp registered
TCP yeah registered
TCP illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 4
NET: Registered protocol family 9
X.25 for Linux Version 0.2
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
sctp: Hash tables configured (established 65536 bind 65536)
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Registering the dns_resolver key type
registered taskstats version 1
rtc_cmos 00:09: setting system clock to 2011-12-11 18:07:41 UTC (1323626861)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-8: STM3320418AS, CC37, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA STM3320418AS CC37 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: new high speed USB device number 2 using ehci_hcd
ata3.00: ATAPI: ASUS DRW-22B2ST, 1.00, max UDMA/100
ata3.00: configured for UDMA/100
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: ATA-8: STM3320418AS, CC37, max UDMA/133
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA STM3320418AS CC37 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM ASUS DRW-22B2ST 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
usb 1-4: new high speed USB device number 5 using ehci_hcd
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >
sd 1:0:0:0: [sdb] Attached SCSI disk
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-4: New USB device found, idVendor=0b05, idProduct=1706
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: 802.11g WLAN Drive
usb 1-4: Manufacturer: ASUS
ata4.00: ATA-8: OCZ-AGILITY2, 1.29, max UDMA/133
ata4.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA OCZ-AGILITY2 1.29 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 >
sd 3:0:0:0: [sdc] Attached SCSI disk
usb 2-2: new low speed USB device number 2 using uhci_hcd
Freeing unused kernel memory: 604k freed
udevd[118]: starting version 175
usb 2-2: New USB device found, idVendor=046a, idProduct=002b
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 046a:002b as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input4
generic-usb 0003:046A:002B.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:002b] on usb-0000:00:10.0-2/input0
input: HID 046a:002b as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/input/input5
generic-usb 0003:046A:002B.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:002b] on usb-0000:00:10.0-2/input1
usb 3-1: new low speed USB device number 2 using uhci_hcd
usb 3-1: New USB device found, idVendor=046d, idProduct=c51b
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Receiver
usb 3-1: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input6
generic-usb 0003:046D:C51B.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-1/input0
generic-usb 0003:046D:C51B.0004: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.1-1/input1
EXT4-fs (sdc7): INFO: recovery required on readonly filesystem
EXT4-fs (sdc7): write access will be enabled during recovery
EXT4-fs (sdc7): recovery complete
EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.4: new high speed USB device number 6 using ehci_hcd
usb 1-1.4: New USB device found, idVendor=058f, idProduct=6362
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Mass Storage Device
usb 1-1.4: Manufacturer: Generic
usb 1-1.4: SerialNumber: 058F312D81B
scsi6 : usb-storage 1-1.4:1.0
udevd[380]: starting version 175
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
snd_hda_intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
hda_intel: position_fix set to 1 for device 1043:81e7
snd_hda_intel 0000:80:01.0: setting latency timer to 64
snd_hda_intel 0000:80:01.0: PCI: Disallowing DAC for device
usb 1-4: reset high speed USB device number 5 using ehci_hcd
hda_codec: ALC660: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:13.0/0000:80:01.0/input/input7
scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
scsi: killing requests for dead queue
scsi: killing requests for dead queue
scsi: killing requests for dead queue
scsi: killing requests for dead queue
scsi: killing requests for dead queue
scsi: killing requests for dead queue
scsi: killing requests for dead queue
scsi: killing requests for dead queue
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:1: Attached scsi generic sg5 type 0
sd 6:0:0:2: Attached scsi generic sg6 type 0
sd 6:0:0:3: Attached scsi generic sg7 type 0
sd 6:0:0:0: [sdd] Attached SCSI removable disk
sd 6:0:0:1: [sde] Attached SCSI removable disk
sd 6:0:0:2: [sdf] Attached SCSI removable disk
sd 6:0:0:3: [sdg] Attached SCSI removable disk
phy0 -> rt2500usb_validate_eeprom: EEPROM recovery - NIC: 0xfff0
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 2570, rf: 0005, rev: 0005.
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2500usb-phy0::radio
Registered led device: rt2500usb-phy0::quality
usbcore: registered new interface driver rt2500usb
kvm: Nested Virtualization enabled
EXT4-fs (sdc7): re-mounted. Opts: (null)
EXT4-fs (sdc7): re-mounted. Opts: discard,errors=remount-ro
md: md128 stopped.
md: bind<sda2>
md: bind<sdb2>
bio: create slab <bio-1> at 1
md/raid0:md128: looking at sdb2
md/raid0:md128: comparing sdb2(2923648) with sdb2(2923648)
md/raid0:md128: END
md/raid0:md128: ==> UNIQUE
md/raid0:md128: 1 zones
md/raid0:md128: looking at sda2
md/raid0:md128: comparing sda2(2923648) with sdb2(2923648)
md/raid0:md128: EQUAL
md/raid0:md128: FINAL 1 zones
md/raid0:md128: done.
md/raid0:md128: md_size is 5847296 sectors.
******* md128 configuration *********
zone0=[sdb2/sda2/]
zone offset=0kb device offset=0kb size=2923648kb
**********************************

md128: detected capacity change from 0 to 2993815552
md128: unknown partition table
md: md123 stopped.
md: bind<sda5>
md: bind<sdb5>
md/raid0:md123: looking at sdb5
md/raid0:md123: comparing sdb5(2923520) with sdb5(2923520)
md/raid0:md123: END
md/raid0:md123: ==> UNIQUE
md/raid0:md123: 1 zones
md/raid0:md123: looking at sda5
md/raid0:md123: comparing sda5(2923520) with sdb5(2923520)
md/raid0:md123: EQUAL
md/raid0:md123: FINAL 1 zones
md/raid0:md123: done.
md/raid0:md123: md_size is 5847040 sectors.
******* md123 configuration *********
zone0=[sdb5/sda5/]
zone offset=0kb device offset=0kb size=2923520kb
**********************************

md123: detected capacity change from 0 to 2993684480
md123: unknown partition table
md: md122 stopped.
md: bind<sda6>
md: bind<sdb6>
md/raid0:md122: looking at sdb6
md/raid0:md122: comparing sdb6(2923520) with sdb6(2923520)
md/raid0:md122: END
md/raid0:md122: ==> UNIQUE
md/raid0:md122: 1 zones
md/raid0:md122: looking at sda6
md/raid0:md122: comparing sda6(2923520) with sdb6(2923520)
md/raid0:md122: EQUAL
md/raid0:md122: FINAL 1 zones
md/raid0:md122: done.
md/raid0:md122: md_size is 5847040 sectors.
******* md122 configuration *********
zone0=[sdb6/sda6/]
zone offset=0kb device offset=0kb size=2923520kb
**********************************

md122: detected capacity change from 0 to 2993684480
md122: unknown partition table
md: md124 stopped.
md: bind<sda7>
md: bind<sdb7>
md/raid0:md124: looking at sdb7
md/raid0:md124: comparing sdb7(19534848) with sdb7(19534848)
md/raid0:md124: END
md/raid0:md124: ==> UNIQUE
md/raid0:md124: 1 zones
md/raid0:md124: looking at sda7
md/raid0:md124: comparing sda7(19534848) with sdb7(19534848)
md/raid0:md124: EQUAL
md/raid0:md124: FINAL 1 zones
md/raid0:md124: done.
md/raid0:md124: md_size is 39069696 sectors.
******* md124 configuration *********
zone0=[sdb7/sda7/]
zone offset=0kb device offset=0kb size=19534848kb
**********************************

md124: detected capacity change from 0 to 20003684352
md124: unknown partition table
md: md126 stopped.
md: bind<sda8>
md: bind<sdb8>
md/raid0:md126: looking at sdb8
md/raid0:md126: comparing sdb8(19534848) with sdb8(19534848)
md/raid0:md126: END
md/raid0:md126: ==> UNIQUE
md/raid0:md126: 1 zones
md/raid0:md126: looking at sda8
md/raid0:md126: comparing sda8(19534848) with sdb8(19534848)
md/raid0:md126: EQUAL
md/raid0:md126: FINAL 1 zones
md/raid0:md126: done.
md/raid0:md126: md_size is 39069696 sectors.
******* md126 configuration *********
zone0=[sdb8/sda8/]
zone offset=0kb device offset=0kb size=19534848kb
**********************************

md126: detected capacity change from 0 to 20003684352
md126: unknown partition table
md: md127 stopped.
md: bind<sda9>
md: bind<sdb9>
md/raid0:md127: looking at sdb9
md/raid0:md127: comparing sdb9(97658880) with sdb9(97658880)
md/raid0:md127: END
md/raid0:md127: ==> UNIQUE
md/raid0:md127: 1 zones
md/raid0:md127: looking at sda9
md/raid0:md127: comparing sda9(97658880) with sdb9(97658880)
md/raid0:md127: EQUAL
md/raid0:md127: FINAL 1 zones
md/raid0:md127: done.
md/raid0:md127: md_size is 195317760 sectors.
******* md127 configuration *********
zone0=[sdb9/sda9/]
zone offset=0kb device offset=0kb size=97658880kb
**********************************

md127: detected capacity change from 0 to 100002693120
md127: unknown partition table
md: md125 stopped.
md: bind<sda10>
md: bind<sdb10>
md/raid0:md125: looking at sdb10
md/raid0:md125: comparing sdb10(479250816) with sdb10(479250816)
md/raid0:md125: END
md/raid0:md125: ==> UNIQUE
md/raid0:md125: 1 zones
md/raid0:md125: looking at sda10
md/raid0:md125: comparing sda10(479250816) with sdb10(479250816)
md/raid0:md125: EQUAL
md/raid0:md125: FINAL 1 zones
md/raid0:md125: done.
md/raid0:md125: md_size is 958501632 sectors.
******* md125 configuration *********
zone0=[sdb10/sda10/]
zone offset=0kb device offset=0kb size=479250816kb
**********************************

md125: detected capacity change from 0 to 490752835584
md125: unknown partition table
Adding 2923644k swap on /dev/md128. Priority:-1 extents:1 across:2923644k
EXT4-fs (sdc1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sdc1): mounted filesystem without journal. Opts: (null)
EXT4-fs (sdc8): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (sdc5): mounted filesystem without journal. Opts: discard
EXT4-fs (md125): mounted filesystem with ordered data mode. Opts: (null)
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
wlan0: authenticate with 00:27:19:d4:1e:e8 (try 1)
wlan0: authenticated
wlan0: associate with 00:27:19:d4:1e:e8 (try 1)
wlan0: RX AssocResp from 00:27:19:d4:1e:e8 (capab=0x431 status=0 aid=1)
wlan0: associated
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
EXT4-fs (sdc7): re-mounted. Opts: discard,errors=remount-ro,commit=0
EXT4-fs (sdc8): re-mounted. Opts: discard,commit=0
EXT4-fs (sdc5): re-mounted. Opts: discard,commit=0
EXT4-fs (md125): re-mounted. Opts: commit=0
virtuoso-t[2919]: segfault at 0 ip 00007f4825513e72 sp 00007fffbfabccd0 error 4 in libc-2.13.so[7f48254dc000+17a000]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.1.5-01 (root@atahualpa) (gcc version 4.6.2 (Debian 4.6.2-6) ) #1 SMP PREEMPT Sat Dec 10 16:50:59 CET 2011
Command line: BOOT_IMAGE=/vmlinuz-3.1.5-01 root=UUID=e03d479b-b9ad-41d9-871c-d381cb6bdba2 ro pci=nomsi radeon.modeset=1 radeon.agpmode=-1 radeon.hw_i2c=1 quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: System manufacturer System Product Name/M2V, BIOS 2101 02/21/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000007ffb0000
0000000000 - 007fe00000 page 2M
007fe00000 - 007ffb0000 page 4k
kernel direct mapping tables up to 7ffb0000 @ 1fffc000-20000000
RAMDISK: 37916000 - 37c83000
ACPI: RSDP 00000000000fa960 00024 (v02 ACPIAM)
ACPI: XSDT 000000007ffb0100 0004C (v01 A_M_I_ OEMXSDT 02000821 MSFT 00000097)
ACPI: FACP 000000007ffb0290 000F4 (v03 A_M_I_ OEMFACP 02000821 MSFT 00000097)
ACPI: DSDT 000000007ffb05c0 04E3F (v01 A0498 A0498000 00000000 INTL 20060113)
ACPI: FACS 000000007ffbe000 00040
ACPI: APIC 000000007ffb0390 00068 (v01 A_M_I_ OEMAPIC 02000821 MSFT 00000097)
ACPI: MCFG 000000007ffb0400 0003C (v01 A_M_I_ OEMMCFG 02000821 MSFT 00000097)
ACPI: OEMB 000000007ffbe040 00060 (v01 A_M_I_ AMI_OEM 02000821 MSFT 00000097)
ACPI: HPET 000000007ffb5400 00038 (v01 A_M_I_ OEMHPET 02000821 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000007ffb0000
Initmem setup node 0 0000000000000000-000000007ffb0000
NODE_DATA [000000007ffab000 - 000000007ffaffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffb0
On node 0 totalpages: 524095
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 8127 pages used for memmap
DMA32 zone: 511985 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88007fc00000 s70016 r8192 d24192 u1048576
pcpu-alloc: s70016 r8192 d24192 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515899
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.1.5-01 root=UUID=e03d479b-b9ad-41d9-871c-d381cb6bdba2 ro pci=nomsi radeon.modeset=1 radeon.agpmode=-1 radeon.hw_i2c=1 quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 688e000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 2050668k/2096832k available (4997k kernel code, 452k absent, 45712k reserved, 2898k data, 604k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:512 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
HPET config register value = 0xFFFFFFFF. Disabling HPET
Fast TSC calibration using PIT
Detected 2835.380 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5670.76 BogoMIPS (lpj=2835380)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
MCE: In-kernel MCE decoding enabled.
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9a000
Brought up 2 CPUs
Total of 2 processors activated (11339.55 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 7ffbe000 (139264 bytes)
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, ffffffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x80000000-0xfcffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff37ffff]
pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d3fff])
pci 0000:00:00.0: [1106:0351] type 0 class 0x000600
pci 0000:00:00.1: [1106:1351] type 0 class 0x000600
pci 0000:00:00.2: [1106:2351] type 0 class 0x000600
pci 0000:00:00.3: [1106:3351] type 0 class 0x000600
pci 0000:00:00.4: [1106:4351] type 0 class 0x000600
pci 0000:00:00.5: [1106:5351] type 0 class 0x000800
pci 0000:00:00.6: [1106:6238] type 0 class 0x000600
pci 0000:00:00.7: [1106:7351] type 0 class 0x000600
pci 0000:00:01.0: [1106:b999] type 1 class 0x000604
pci 0000:00:02.0: [1106:a238] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: [1106:c238] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.1: [1106:d238] type 1 class 0x000604
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PME# disabled
pci 0000:00:03.2: [1106:e238] type 1 class 0x000604
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: [1106:f238] type 1 class 0x000604
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:0f.0: [1106:0591] type 0 class 0x000101
pci 0000:00:0f.0: reg 10: [io 0xcc00-0xcc07]
pci 0000:00:0f.0: reg 14: [io 0xc880-0xc883]
pci 0000:00:0f.0: reg 18: [io 0xc800-0xc807]
pci 0000:00:0f.0: reg 1c: [io 0xc480-0xc483]
pci 0000:00:0f.0: reg 20: [io 0xc400-0xc40f]
pci 0000:00:0f.0: reg 24: [io 0xc000-0xc0ff]
pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.0: reg 20: [io 0xb480-0xb49f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.1: reg 20: [io 0xb800-0xb81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.2: reg 20: [io 0xb880-0xb89f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.3: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
pci 0000:00:10.4: reg 10: [mem 0xfbcffc00-0xfbcffcff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
pci 0000:00:11.0: [1106:3337] type 0 class 0x000601
pci 0000:00:11.7: [1106:287e] type 0 class 0x000600
pci 0000:00:13.0: [1106:337b] type 1 class 0x000604
pci 0000:00:13.1: [1106:337a] type 1 class 0x000604
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: [1002:7288] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xfbde0000-0xfbdeffff 64bit]
pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:72a8] type 0 class 0x000380
pci 0000:02:00.1: reg 10: [mem 0xfbdf0000-0xfbdfffff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06-06]
pci 0000:00:03.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 05-05]
pci 0000:00:03.1: bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
pci 0000:00:03.2: PCI bridge to [bus 04-04]
pci 0000:00:03.2: bridge window [mem 0xfad00000-0xfadfffff 64bit pref]
pci 0000:00:03.3: PCI bridge to [bus 03-03]
pci 0000:00:03.3: bridge window [mem 0xfac00000-0xfacfffff 64bit pref]
pci 0000:80:01.0: [1106:3288] type 0 class 0x000403
pci 0000:80:01.0: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: PME# disabled
pci 0000:80:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:13.0: PCI bridge to [bus 80-80]
pci 0000:00:13.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:07:08.0: [1095:3512] type 0 class 0x000104
pci 0000:07:08.0: reg 10: [io 0xec00-0xec07]
pci 0000:07:08.0: reg 14: [io 0xe880-0xe883]
pci 0000:07:08.0: reg 18: [io 0xe800-0xe807]
pci 0000:07:08.0: reg 1c: [io 0xe480-0xe483]
pci 0000:07:08.0: reg 20: [io 0xe400-0xe40f]
pci 0000:07:08.0: reg 24: [mem 0xfbeffc00-0xfbeffdff]
pci 0000:07:08.0: reg 30: [mem 0xfbe00000-0xfbe7ffff pref]
pci 0000:07:08.0: supports D1 D2
pci 0000:00:13.1: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:13.1: bridge window [io 0xe000-0xefff]
pci 0000:00:13.1: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:13.1: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:13.1: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:13.1: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:13.1: bridge window [mem 0x80000000-0xff37ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks= none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 000000007ffb0000 - 000000007fffffff
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp
 

Thread Tools




All times are GMT. The time now is 06:32 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org