FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 11-23-2011, 03:43 PM
Michal Suchanek
 
Default Bug#649735: linux-image-3.0.0-2-amd64: kernel oops on removing an USB floppy drive

Package: linux-2.6
Version: 3.0.0-5
Severity: normal


Hello,

running a kernel compiled from the 3.0.0-5 sources with some Radeon
patches I see a bug after removing an USB floppy drive.

I removed it because it was obviously broken and seemed to block mtools
forever trying to read from it.


-- Package-specific info:
** Kernel log: boot messages should be attached

[1280596.120022] usb 8-2: new full speed USB device number 2 using uhci_hcd
[1280596.444036] usb 8-2: New USB device found, idVendor=0644, idProduct=0000
[1280596.444040] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[1280596.444043] usb 8-2: Product: TEAC FD-05PUB
[1280596.444045] usb 8-2: Manufacturer: TEAC
[1280596.448198] scsi13 : usb-storage 8-2:1.0
[1280597.478069] scsi 13:0:0:0: Direct-Access TEAC FD-05PUB 1026 PQ: 0 ANSI: 0 CCS
[1280597.491315] sd 13:0:0:0: Attached scsi generic sg8 type 0
[1280597.862055] sd 13:0:0:0: [sdg] Attached SCSI removable disk
[1280612.710061] sd 13:0:0:0: [sdg] READ CAPACITY failed
[1280612.710065] sd 13:0:0:0: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[1280612.710069] sd 13:0:0:0: [sdg] Sense Key : Medium Error [current]
[1280612.710073] sd 13:0:0:0: [sdg] Add. Sense: Medium format corrupted
[1280612.838073] sd 13:0:0:0: [sdg] Write Protect is on
[1280612.838076] sd 13:0:0:0: [sdg] Mode Sense: 00 46 94 80
[1280612.966053] sd 13:0:0:0: [sdg] No Caching mode page present
[1280612.966057] sd 13:0:0:0: [sdg] Assuming drive cache: write through
[1280613.478056] sd 13:0:0:0: [sdg] READ CAPACITY failed
[1280613.478060] sd 13:0:0:0: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[1280613.478064] sd 13:0:0:0: [sdg] Sense Key : Medium Error [current]
[1280613.478068] sd 13:0:0:0: [sdg] Add. Sense: Medium format corrupted
[1280613.734067] sd 13:0:0:0: [sdg] No Caching mode page present
[1280613.734072] sd 13:0:0:0: [sdg] Assuming drive cache: write through
[1280716.296046] usb 8-2: USB disconnect, device number 2
[1280716.416262] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[1280716.416323] IP: [<ffffffffa01da794>] sd_revalidate_disk+0x33/0x1603 [sd_mod]
[1280716.416378] PGD bbcd0067 PUD b55ae067 PMD 0
[1280716.416409] Oops: 0000 [#1] SMP
[1280716.416433] CPU 1
[1280716.416446] Modules linked in: des_generic ecb md4 hmac cifs fscache omfs jfs xfs reiserfs ext4 jbd2 crc16 ext2 hfs hfsplus vfat fat vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) nls_utf8 isofs udf crc_itu_t dm_mod uinput binfmt_misc pci_stub bridge stp xt_tcpudp xt_conntrack xt_state xt_dscp xt_DSCP xt_CLASSIFY ipt_LOG ipt_REJECT xt_owner nf_conntrack_tftp nf_nat_ftp nf_conntrack_ftp nf_nat_sip nf_conntrack_sip nf_nat_h323 nf_conntrack_h323 nf_nat_pptp nf_conntrack_pptp nf_conntrack_proto_gre nf_nat_proto_gre nf_nat_irc nf_conntrack_irc iptable_filter iptable_nat ipt_MASQUERADE nf_nat xt_multiport xt_iprange nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables tun fuse kvm_intel kvm snd_pcm_oss snd_mixer_oss coretemp loop snd_hda_codec_hdmi snd_hda_codec_analog joydev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq dell_wmi sparse_keymap evdev snd_timer snd_seq_device snd dcdbas tpm_tis i2c_i801 tpm tpm_bios parport_pc psmouse parport pcspkr wmi se
rio_raw soundcore snd_page_alloc processor button thermal_sys ext3 jbd mbcache sg sd_mod sr_mod crc_t10dif cdrom usb_storage ahci usbhid hid uas libahci sata_sil24 uhci_hcd radeon ttm drm_kms_helper ata_generic e1000e ehci_hcd drm i2c_algo_bit i2c_core power_supply usbcore libata scsi_mod [last unloaded: vboxdrv]
[1280716.417277]
[1280716.417288] Pid: 3603, comm: udisks-daemon Tainted: G O 3.0.0-kmscur1flush1-amd64 #2 Dell Inc. OptiPlex 960 /0Y958C
[1280716.417368] RIP: 0010:[<ffffffffa01da794>] [<ffffffffa01da794>] sd_revalidate_disk+0x33/0x1603 [sd_mod]
[1280716.417429] RSP: 0018:ffff8800c73b7af8 EFLAGS: 00010246
[1280716.417462] RAX: 0000000000000000 RBX: ffff88011e8844c0 RCX: 0000000000000001
[1280716.417505] RDX: 0000000000000001 RSI: ffff8800c4344d80 RDI: ffff880020227000
[1280716.417548] RBP: 0000000000000000 R08: 00000008ffffffff R09: ffff880027318740
[1280716.417590] R10: ffff880027318740 R11: ffff880027318740 R12: ffff880020227000
[1280716.417633] R13: 0000000000000000 R14: ffff88011e8844d8 R15: ffff88011e8844c0
[1280716.417676] FS: 00007fa4061cd7a0(0000) GS:ffff880127c40000(0000) knlGS:0000000000000000
[1280716.417724] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[1280716.417759] CR2: 0000000000000008 CR3: 00000000af7ed000 CR4: 00000000000426e0
[1280716.417802] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[1280716.417844] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[1280716.417887] Process udisks-daemon (pid: 3603, threadinfo ffff8800c73b6000, task ffff88011f9c0870)
[1280716.417939] Stack:
[1280716.417953] ffff8801232b4000 ffffffff811043aa 000000000000001d ffff880020227048
[1280716.418002] 0000000000000000 ffff880020227000 000000000000001d ffff88011e8844d8
[1280716.418051] ffff88011e8844c0 ffff880020227000 ffff88011e8844c0 ffff88011e8844c0
[1280716.418100] Call Trace:
[1280716.418120] [<ffffffff811043aa>] ? iget5_locked+0x5c/0x11c
[1280716.418157] [<ffffffff8113d770>] ? rescan_partitions+0xac/0x418
[1280716.418195] [<ffffffff81117357>] ? __blkdev_get+0x1a2/0x38a
[1280716.418230] [<ffffffff811177e6>] ? blkdev_get+0x2a7/0x2a7
[1280716.418264] [<ffffffff81117706>] ? blkdev_get+0x1c7/0x2a7
[1280716.418299] [<ffffffff811177e6>] ? blkdev_get+0x2a7/0x2a7
[1280716.418334] [<ffffffff810effb0>] ? __dentry_open+0x182/0x29c
[1280716.418370] [<ffffffff810f8eba>] ? dget+0x12/0x1e
[1280716.418400] [<ffffffff810fb745>] ? do_last+0x44f/0x565
[1280716.418433] [<ffffffff810fc319>] ? path_openat+0xc7/0x315
[1280716.418467] [<ffffffff810fc591>] ? do_filp_open+0x2a/0x6e
[1280716.418503] [<ffffffff81032fc7>] ? should_resched+0x5/0x23
[1280716.418539] [<ffffffff8131e27f>] ? _cond_resched+0x7/0x1c
[1280716.418574] [<ffffffff81105313>] ? alloc_fd+0x64/0x109
[1280716.418606] [<ffffffff810f0ee6>] ? do_sys_open+0x5e/0xe5
[1280716.418641] [<ffffffff813244d2>] ? system_call_fastpath+0x16/0x1b
[1280716.418678] Code: 55 53 48 81 ec 88 00 00 00 48 8b af 28 03 00 00 65 48 8b 04 25 28 00 00 00 48 89 44 24 78 31 c0 8b 05 21 8b e4 ff 48 89 7c 24 48 <4c> 8b 7d 08 c1 e8 15 83 e0 07 83 f8 03 76 43 48 8b 8d 78 02 00
[1280716.418861] RIP [<ffffffffa01da794>] sd_revalidate_disk+0x33/0x1603 [sd_mod]
[1280716.418909] RSP <ffff8800c73b7af8>
[1280716.418931] CR2: 0000000000000008
[1280716.428807] ---[ end trace 4b08d25f56fd78d7 ]---
[1280717.824020] usb 8-2: new full speed USB device number 3 using uhci_hcd
[1280718.152060] usb 8-2: New USB device found, idVendor=0644, idProduct=0000
[1280718.152065] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[1280718.152068] usb 8-2: Product: TEAC FD-05PUB
[1280718.152070] usb 8-2: Manufacturer: TEAC
[1280718.156166] scsi14 : usb-storage 8-2:1.0
[1280719.206100] scsi 14:0:0:0: Direct-Access TEAC FD-05PUB 1026 PQ: 0 ANSI: 0 CCS
[1280719.212452] sd 14:0:0:0: Attached scsi generic sg8 type 0
[1280719.590090] sd 14:0:0:0: [sdg] Attached SCSI removable disk
[1280725.472048] usb 8-2: USB disconnect, device number 3
[1280790.226541] usb 2-4: USB disconnect, device number 5
[1281143.565826] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[1281143.565838] PM: Marking nosave pages: 00000000cfdff000 - 0000000100000000
[1281143.566839] PM: Basic memory bitmaps created
[1281143.572946] Syncing filesystems ... done.
[1281143.573275] Freezing user space processes ...
[1281163.588020] Freezing of tasks failed after 20.01 seconds (1 tasks refusing to freeze, wq_busy=0):
[1281163.588090] blkid D ffff880127cd2840 0 5179 1 0x00800004
[1281163.588096] ffff8800c448e040 0000000000000086 0000000000000000 ffff880122c26f60
[1281163.588101] 0000000000012840 ffff8801059bffd8 ffff8801059bffd8 ffff8800c448e040
[1281163.588106] 0000000000000100 00000001059bfb60 ffff8801059bfb60 ffff88011e8844d8
[1281163.588111] Call Trace:
[1281163.588119] [<ffffffff8131eb2b>] ? __mutex_lock_common.isra.6+0xff/0x164
[1281163.588123] [<ffffffff8131ea19>] ? mutex_lock+0x1a/0x2d
[1281163.588128] [<ffffffff81117243>] ? __blkdev_get+0x8e/0x38a
[1281163.588133] [<ffffffff81032fc7>] ? should_resched+0x5/0x23
[1281163.588136] [<ffffffff811177e6>] ? blkdev_get+0x2a7/0x2a7
[1281163.588139] [<ffffffff81117706>] ? blkdev_get+0x1c7/0x2a7
[1281163.588143] [<ffffffff811177e6>] ? blkdev_get+0x2a7/0x2a7
[1281163.588146] [<ffffffff81116863>] ? bdget+0x39/0x113
[1281163.588149] [<ffffffff811177e6>] ? blkdev_get+0x2a7/0x2a7
[1281163.588153] [<ffffffff810effb0>] ? __dentry_open+0x182/0x29c
[1281163.588157] [<ffffffff810f8eba>] ? dget+0x12/0x1e
[1281163.588160] [<ffffffff810fb745>] ? do_last+0x44f/0x565
[1281163.588164] [<ffffffff810fc319>] ? path_openat+0xc7/0x315
[1281163.588168] [<ffffffff810c6acd>] ? pte_offset_kernel+0x16/0x35
[1281163.588171] [<ffffffff810fc591>] ? do_filp_open+0x2a/0x6e
[1281163.588175] [<ffffffff81032fc7>] ? should_resched+0x5/0x23
[1281163.588178] [<ffffffff8131e27f>] ? _cond_resched+0x7/0x1c
[1281163.588182] [<ffffffff81105313>] ? alloc_fd+0x64/0x109
[1281163.588186] [<ffffffff810f0ee6>] ? do_sys_open+0x5e/0xe5
[1281163.588190] [<ffffffff813244d2>] ? system_call_fastpath+0x16/0x1b
[1281163.588194]
[1281163.588196] Restarting tasks ... done.
[1281163.609060] PM: Basic memory bitmaps freed

** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 960
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A01
board_vendor: Dell Inc.
board_name: 0Y958C
board_version: A00

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e10] (rev 03)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset HECI Controller [8086:2e14] (rev 03)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:03.2 IDE interface [0101]: Intel Corporation 4 Series Chipset PT IDER Controller [8086:2e16] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe80 [size=8]
Region 1: I/O ports at fe90 [size=4]
Region 2: I/O ports at fea0 [size=8]
Region 3: I/O ports at feb0 [size=4]
Region 4: I/O ports at fef0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_generic

00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset Serial KT Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ec98 [size=8]
Region 1: Memory at febd8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network Connection [8086:10de] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at febd9000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ecc0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at febda000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller [8086:3a6e] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at febdc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000f0300000-00000000f04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 [8086:3a72] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000f0100000-00000000f02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface Controller [8086:3a14] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family) SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 50
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=32]
Region 5: Memory at f0000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller [8086:3a60] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at febdb000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Redwood [Radeon HD 5670] [1002:68d8] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:e151]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe9e0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at dc00 [size=256]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon

01:00.1 Audio device [0403]: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series] [1002:aa60]
Subsystem: PC Partner Limited Device [174b:aa60]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 52
Region 0: Memory at fe9dc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

03:00.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3531 [SATALink/SATARaid] Serial ATA Controller [1095:3531] (rev 01)
Subsystem: Silicon Image, Inc. SiI 3531 [SATALink/SATARaid] Serial ATA Controller [1095:3531]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe7fd000 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at fe7fe000 (64-bit, non-prefetchable) [size=8K]
Region 4: I/O ports at cc80 [size=128]
Capabilities: <access denied>
Kernel driver in use: sata_sil24


** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 074: ID 047d:2048 Kensington
Bus 003 Device 073: ID 04b3:301b IBM Corp. SK-8815 Keyboard
Bus 003 Device 072: ID 04b3:301a IBM Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0644:0200 TEAC Corp. All-In-One Multi-Card Reader CA200/B/S
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: wheezy/sid
APT prefers stable
APT policy: (900, 'stable'), (500, 'testing'), (410, 'unstable'), (200, 'experimental'), (111, 'oldstable'), (107, 'natty-updates'), (107, 'natty')
Architecture: amd64 (x86_64)

Kernel: Linux 3.0.0-kmscur1flush1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-3.0.0-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99+lm tools for generating an initramfs
ii linux-base 3.3 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-3.0.0-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver

Versions of packages linux-image-3.0.0-2-amd64 suggests:
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version
pn linux-doc-3.0. <none> (no description available)

Versions of packages linux-image-3.0.0-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.34 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-3.0.0-2-amd64/prerm/removing-running-kernel-3.0.0-2-amd64: true
linux-image-3.0.0-2-amd64/postinst/missing-firmware-3.0.0-2-amd64:
linux-image-3.0.0-2-amd64/postinst/ignoring-ramdisk:
linux-image-3.0.0-2-amd64/postinst/depmod-error-initrd-3.0.0-2-amd64: false



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111123164349.8516.81323.reportbug@OptiPlex960.ru k.cuni.cz">http://lists.debian.org/20111123164349.8516.81323.reportbug@OptiPlex960.ru k.cuni.cz
 

Thread Tools




All times are GMT. The time now is 09:20 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org