Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#649540: ACPI failures on Dell Latitude D6220 (http://www.linux-archive.org/debian-kernel/601115-bug-649540-acpi-failures-dell-latitude-d6220.html)

Juliusz Chroboczek 11-22-2011 12:01 AM

Bug#649540: ACPI failures on Dell Latitude D6220
 
Package: linux-image-3.1.0-1-amd64
Version: 3.1.1-1

I'm trying to track down the low battery life on a Dell Latitude D6220
with BIOS version A03. The ACPI thermal zone always indicates 25
degrees (although both coretemp and i8k indicate reasonable values), and
rebooting hangs without reboot=pci.

With no parameters, the kernel complains with:

[ 227.525937] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)
[ 227.525946] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880128e7a3d0), AE_TIME (20110623/psparse-536)
...

(Please see full log attached).

Adding acpi_serialize causes udev to hang; if you wait for long enough,
udev enters a timeout loop (repeatedly timing out when trying to call
modprobe).

Adding reboot=pci makes reboot work.

Adding ec_delay=1000 has no apparent effect.

Adding pcie_aspm=force has no apparent effect.

-- Juliusz Chroboczek

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1-amd64 (Debian 3.1.1-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Mon Nov 14 08:02:25 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/pirx-root ro reboot=pci pcie_aspm=force quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000091400 (usable)
[ 0.000000] BIOS-e820: 0000000000091400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000caa29000 (usable)
[ 0.000000] BIOS-e820: 00000000caa29000 - 00000000caa6d000 (reserved)
[ 0.000000] BIOS-e820: 00000000caa6d000 - 00000000cadb7000 (usable)
[ 0.000000] BIOS-e820: 00000000cadb7000 - 00000000cade7000 (reserved)
[ 0.000000] BIOS-e820: 00000000cade7000 - 00000000cafe7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cafe7000 - 00000000cafff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cafff000 - 00000000cb000000 (usable)
[ 0.000000] BIOS-e820: 00000000cb800000 - 00000000cfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 00000000ffc20000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000012e000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Latitude E6220/0R97MN, BIOS A03 09/19/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x12e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0C8000000 mask FFC000000 write-back
[ 0.000000] 4 base 0CB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FE0000000 write-back
[ 0.000000] 6 base 120000000 mask FF0000000 write-back
[ 0.000000] 7 base 12E000000 mask FFE000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cb000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f1c40] f1c40
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000008c000] 8c000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
[ 0.000000] 0000000000 - 00cb000000 page 2M
[ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000012e000000
[ 0.000000] 0100000000 - 012e000000 page 2M
[ 0.000000] kernel direct mapping tables up to 12e000000 @ cadb1000-cadb7000
[ 0.000000] RAMDISK: 36ab8000 - 37554000
[ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000caffde18 00074 (v01 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000caf7e018 08461 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
[ 0.000000] ACPI: FACS 00000000cafe4e40 00040
[ 0.000000] ACPI: APIC 00000000caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: TCPA 00000000cafe5d18 00032 (v02 00000000 00000000)
[ 0.000000] ACPI: SSDT 00000000caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
[ 0.000000] ACPI: MCFG 00000000cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
[ 0.000000] ACPI: BOOT 00000000cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000caf7d018 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
[ 0.000000] ACPI: SSDT 00000000caf7c018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903)
[ 0.000000] ACPI: DMAR 00000000caf87c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000012e000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000012e000000
[ 0.000000] NODE_DATA [000000012dffb000 - 000000012dffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880129600000-ffff88012cffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0012e000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000091
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000caa29
[ 0.000000] 0: 0x000caa6d -> 0x000cadb7
[ 0.000000] 0: 0x000cafff -> 0x000cb000
[ 0.000000] 0: 0x00100000 -> 0x0012e000
[ 0.000000] On node 0 totalpages: 1018101
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 811436 pages, LIFO batch:31
[ 0.000000] Normal zone: 2576 pages used for memmap
[ 0.000000] Normal zone: 185840 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000caa29000 - 00000000caa6d000
[ 0.000000] PM: Registered nosave memory: 00000000cadb7000 - 00000000cade7000
[ 0.000000] PM: Registered nosave memory: 00000000cade7000 - 00000000cafe7000
[ 0.000000] PM: Registered nosave memory: 00000000cafe7000 - 00000000cafff000
[ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cb800000
[ 0.000000] PM: Registered nosave memory: 00000000cb800000 - 00000000cfa00000
[ 0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
[ 0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f31c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012dc00000 s80768 r8192 d21632 u131072
[ 0.000000] pcpu-alloc: s80768 r8192 d21632 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1001184
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/pirx-root ro reboot=pci pcie_aspm=force quiet
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.000000] Memory: 3925872k/4947968k available (3290k kernel code, 875564k absent, 146532k reserved, 3428k data, 556k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:808 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2494.801 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4989.60 BogoMIPS (lpj=9979204)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000044] Security Framework initialized
[ 0.000367] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001397] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001837] Mount-cache hash table entries: 256
[ 0.001952] Initializing cgroup subsys cpuacct
[ 0.001958] Initializing cgroup subsys memory
[ 0.001969] Initializing cgroup subsys devices
[ 0.001972] Initializing cgroup subsys freezer
[ 0.001974] Initializing cgroup subsys net_cls
[ 0.001976] Initializing cgroup subsys blkio
[ 0.002003] CPU: Physical Processor ID: 0
[ 0.002005] CPU: Processor Core ID: 0
[ 0.002009] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002010] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002013] mce: CPU supports 7 MCE banks
[ 0.002024] CPU0: Thermal monitoring enabled (TM1)
[ 0.002031] using mwait in idle threads.
[ 0.002454] ACPI: Core revision 20110623
[ 0.008849] DMAR: Host address width 36
[ 0.008851] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.008858] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.008860] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.008865] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.008866] DMAR: RMRR base: 0x000000cadc6000 end: 0x000000cadd5fff
[ 0.008868] DMAR: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
[ 0.008870] DMAR: No ATSR found
[ 0.008940] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.008942] HPET id 0 under DRHD base 0xfed91000
[ 0.008943] HPET id 0 under DRHD base 0xfed91000
[ 0.008944] HPET id 0 under DRHD base 0xfed91000
[ 0.008945] HPET id 0 under DRHD base 0xfed91000
[ 0.008947] HPET id 0 under DRHD base 0xfed91000
[ 0.008948] HPET id 0 under DRHD base 0xfed91000
[ 0.008949] HPET id 0 under DRHD base 0xfed91000
[ 0.008950] HPET id 0 under DRHD base 0xfed91000
[ 0.009185] Enabled Interrupt-remapping
[ 0.009187] Enabling x2apic
[ 0.009188] Enabled x2apic
[ 0.009194] Switched APIC routing to cluster x2apic.
[ 0.009568] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049208] CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz stepping 07
[ 0.155752] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.155758] ... version: 3
[ 0.155759] ... bit width: 48
[ 0.155760] ... generic registers: 4
[ 0.155761] ... value mask: 0000ffffffffffff
[ 0.155763] ... max period: 000000007fffffff
[ 0.155764] ... fixed-purpose events: 3
[ 0.155765] ... event mask: 000000070000000f
[ 0.156000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156094] Booting Node 0, Processors #1
[ 0.156097] smpboot cpu 1: start_ip = 8c000
[ 0.263753] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.263839] #2
[ 0.263841] smpboot cpu 2: start_ip = 8c000
[ 0.371562] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.371659] #3
[ 0.371661] smpboot cpu 3: start_ip = 8c000
[ 0.479411] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.479435] Brought up 4 CPUs
[ 0.479438] Total of 4 processors activated (19954.93 BogoMIPS).
[ 0.481757] devtmpfs: initialized
[ 0.484387] PM: Registering ACPI NVS region at cade7000 (2097152 bytes)
[ 0.484599] print_constraints: dummy:
[ 0.484651] NET: Registered protocol family 16
[ 0.484731] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.484734] ACPI: bus type pci registered
[ 0.484806] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.484808] PCI: not using MMCONFIG
[ 0.484810] PCI: Using configuration type 1 for base access
[ 0.484817] dmi type 0xB1 record - unknown flag
[ 0.485295] bio: create slab <bio-0> at 0
[ 0.485382] ACPI: Added _OSI(Module Device)
[ 0.485384] ACPI: Added _OSI(Processor Device)
[ 0.485386] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.485387] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.486542] ACPI: EC: Look up EC in DSDT
[ 0.491410] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.619593] ACPI: SSDT 00000000cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
[ 0.619912] ACPI: Dynamic OEM Table Load:
[ 0.619914] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
[ 0.631466] ACPI: SSDT 00000000cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
[ 0.631824] ACPI: Dynamic OEM Table Load:
[ 0.631826] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
[ 0.643276] ACPI: SSDT 00000000cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
[ 0.643574] ACPI: Dynamic OEM Table Load:
[ 0.643576] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
[ 0.727098] ACPI: Interpreter enabled
[ 0.727101] ACPI: (supports S0 S3 S4 S5)
[ 0.727124] ACPI: Using IOAPIC for interrupt routing
[ 0.727143] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.727597] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 1.382531] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
[ 1.430170] ACPI: No dock devices found.
[ 1.430172] HEST: Table not found.
[ 1.430174] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.430576] \_SB_.PCI0:_OSC invalid UUID
[ 1.430577] _OSC request data:1 8 1f
[ 1.430581] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.431297] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.431300] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.431302] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.431304] pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xfeafffff]
[ 1.431306] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 1.431317] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 1.431350] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
[ 1.431359] pci 0000:00:02.0: reg 10: [mem 0xe0c00000-0xe0ffffff 64bit]
[ 1.431365] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.431369] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
[ 1.431417] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 1.431440] pci 0000:00:16.0: reg 10: [mem 0xe1cb0000-0xe1cb000f 64bit]
[ 1.431502] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.431507] pci 0000:00:16.0: PME# disabled
[ 1.431536] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
[ 1.431554] pci 0000:00:19.0: reg 10: [mem 0xe1c00000-0xe1c1ffff]
[ 1.431563] pci 0000:00:19.0: reg 14: [mem 0xe1c80000-0xe1c80fff]
[ 1.431571] pci 0000:00:19.0: reg 18: [io 0x3080-0x309f]
[ 1.431620] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.431625] pci 0000:00:19.0: PME# disabled
[ 1.431649] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 1.431669] pci 0000:00:1a.0: reg 10: [mem 0xe1c70000-0xe1c703ff]
[ 1.431742] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.431747] pci 0000:00:1a.0: PME# disabled
[ 1.431771] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 1.431786] pci 0000:00:1b.0: reg 10: [mem 0xe1c60000-0xe1c63fff 64bit]
[ 1.431841] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.431845] pci 0000:00:1b.0: PME# disabled
[ 1.431871] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 1.431973] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.431978] pci 0000:00:1c.0: PME# disabled
[ 1.432013] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 1.432110] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.432114] pci 0000:00:1c.1: PME# disabled
[ 1.432150] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[ 1.432249] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.432254] pci 0000:00:1c.2: PME# disabled
[ 1.432292] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 1.432393] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.432397] pci 0000:00:1c.5: PME# disabled
[ 1.432434] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 1.432455] pci 0000:00:1d.0: reg 10: [mem 0xe1c50000-0xe1c503ff]
[ 1.432528] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.432532] pci 0000:00:1d.0: PME# disabled
[ 1.432557] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
[ 1.432672] pci 0000:00:1f.2: [8086:282a] type 0 class 0x000104
[ 1.432690] pci 0000:00:1f.2: reg 10: [io 0x30d0-0x30d7]
[ 1.432698] pci 0000:00:1f.2: reg 14: [io 0x30c0-0x30c3]
[ 1.432706] pci 0000:00:1f.2: reg 18: [io 0x30b0-0x30b7]
[ 1.432714] pci 0000:00:1f.2: reg 1c: [io 0x30a0-0x30a3]
[ 1.432722] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
[ 1.432730] pci 0000:00:1f.2: reg 24: [mem 0xe1c40000-0xe1c407ff]
[ 1.432762] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.432766] pci 0000:00:1f.2: PME# disabled
[ 1.432784] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 1.432800] pci 0000:00:1f.3: reg 10: [mem 0xe1c30000-0xe1c300ff 64bit]
[ 1.432821] pci 0000:00:1f.3: reg 20: [io 0x3040-0x305f]
[ 1.432916] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.433162] pci 0000:02:00.0: [8086:422b] type 0 class 0x000280
[ 1.433309] pci 0000:02:00.0: reg 10: [mem 0xe1b00000-0xe1b01fff 64bit]
[ 1.433883] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.433918] pci 0000:02:00.0: PME# disabled
[ 1.442175] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 1.442184] pci 0000:00:1c.1: bridge window [mem 0xe1b00000-0xe1bfffff]
[ 1.442263] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
[ 1.442268] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 1.442274] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe19fffff]
[ 1.442282] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 1.444098] pci 0000:09:00.0: [1217:8221] type 0 class 0x000805
[ 1.444141] pci 0000:09:00.0: reg 10: [mem 0xe1a20000-0xe1a201ff]
[ 1.444401] pci 0000:09:00.0: supports D1 D2
[ 1.444403] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.444413] pci 0000:09:00.0: PME# disabled
[ 1.444510] pci 0000:09:00.1: [1217:8231] type 0 class 0x000180
[ 1.444553] pci 0000:09:00.1: reg 10: [mem 0xe1a10000-0xe1a10fff]
[ 1.444611] pci 0000:09:00.1: reg 18: [mem 0xe1a00000-0xe1a007ff]
[ 1.444811] pci 0000:09:00.1: supports D1 D2
[ 1.444813] pci 0000:09:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.444823] pci 0000:09:00.1: PME# disabled
[ 1.451764] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[ 1.451771] pci 0000:00:1c.5: bridge window [mem 0xe1a00000-0xe1afffff]
[ 1.451806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.452050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.452094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.452142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.452199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.452296] \_SB_.PCI0:_OSC invalid UUID
[ 1.452298] _OSC request data:1 1f 1f
[ 1.452301] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.452340] \_SB_.PCI0:_OSC invalid UUID
[ 1.452341] _OSC request data:1 0 1d
[ 1.452344] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.452345] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.456395] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.456444] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.456492] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.456539] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.456587] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 1.456633] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.456681] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 1.456728] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.456814] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 1.456822] vgaarb: loaded
[ 1.456823] vgaarb: bridge control possible 0000:00:02.0
[ 1.456854] PCI: Using ACPI for IRQ routing
[ 1.458511] PCI: pci_cache_line_size set to 64 bytes
[ 1.460347] reserve RAM buffer: 0000000000091400 - 000000000009ffff
[ 1.460350] reserve RAM buffer: 00000000caa29000 - 00000000cbffffff
[ 1.460353] reserve RAM buffer: 00000000cadb7000 - 00000000cbffffff
[ 1.460356] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
[ 1.460359] reserve RAM buffer: 000000012e000000 - 000000012fffffff
[ 1.460452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.460457] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.462472] Switching to clocksource hpet
[ 1.464040] pnp: PnP ACPI init
[ 1.464051] ACPI: bus type pnp registered
[ 1.464423] pnp 00:00: [bus 00-3e]
[ 1.464425] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.464427] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.464429] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.464431] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.464433] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.464434] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.464436] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.464438] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.464439] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.464441] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.464443] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.464445] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.464446] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.464448] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.464451] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.464452] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.464454] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.464456] pnp 00:00: [mem 0xcfa00000-0xfeafffff window]
[ 1.464458] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.464501] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.464514] pnp 00:01: [io 0x0000-0x001f]
[ 1.464515] pnp 00:01: [io 0x0081-0x0091]
[ 1.464517] pnp 00:01: [io 0x0093-0x009f]
[ 1.464518] pnp 00:01: [io 0x00c0-0x00df]
[ 1.464520] pnp 00:01: [dma 4]
[ 1.464540] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.464548] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.464565] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.464644] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.464679] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 1.464681] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 1.464691] pnp 00:04: [io 0x00f0]
[ 1.464702] pnp 00:04: [irq 13]
[ 1.464721] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.464731] pnp 00:05: [io 0x002e-0x002f]
[ 1.464733] pnp 00:05: [io 0x004e-0x004f]
[ 1.464734] pnp 00:05: [io 0x0061]
[ 1.464736] pnp 00:05: [io 0x0063]
[ 1.464737] pnp 00:05: [io 0x0065]
[ 1.464739] pnp 00:05: [io 0x0067]
[ 1.464740] pnp 00:05: [io 0x0070]
[ 1.464741] pnp 00:05: [io 0x0080]
[ 1.464743] pnp 00:05: [io 0x0092]
[ 1.464744] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.464746] pnp 00:05: [io 0x0680-0x069f]
[ 1.464747] pnp 00:05: [io 0x1000-0x100f]
[ 1.464749] pnp 00:05: [io 0xffff]
[ 1.464750] pnp 00:05: [io 0xffff]
[ 1.464751] pnp 00:05: [io 0x0400-0x047f]
[ 1.464753] pnp 00:05: [io 0x0500-0x057f]
[ 1.464755] pnp 00:05: [io 0x164e-0x164f]
[ 1.464791] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.464793] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.464795] system 00:05: [io 0xffff] has been reserved
[ 1.464797] system 00:05: [io 0xffff] has been reserved
[ 1.464799] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.464802] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.464804] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.464806] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.464814] pnp 00:06: [io 0x0070-0x0077]
[ 1.464820] pnp 00:06: [irq 8]
[ 1.464840] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.464851] pnp 00:07: [io 0x0060]
[ 1.464852] pnp 00:07: [io 0x0064]
[ 1.464858] pnp 00:07: [irq 1]
[ 1.464877] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.466009] Switched to NOHz mode on CPU #0
[ 1.466086] Switched to NOHz mode on CPU #3
[ 1.466095] Switched to NOHz mode on CPU #2
[ 1.466132] Switched to NOHz mode on CPU #1
[ 1.470850] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 1.470864] pnp 00:09: [irq 12]
[ 1.470886] pnp 00:09: Plug and Play ACPI device, IDs DLL04a9 PNP0f13 (active)
[ 1.471043] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 1.471044] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 1.471046] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 1.471048] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 1.471049] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[ 1.471051] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 1.471053] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 1.471054] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 1.471056] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 1.471057] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 1.471059] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 1.471061] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 1.471106] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.471108] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.471110] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.471113] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.471115] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.471117] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.471120] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.471122] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.471125] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.471127] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.471129] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.471515] pnp 00:0b: [irq 23]
[ 1.471546] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 1.486783] pnp 00:0c: [mem 0x20000000-0x201fffff]
[ 1.486786] pnp 00:0c: [mem 0x40000000-0x401fffff]
[ 1.486842] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[ 1.486844] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
[ 1.486847] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.486855] pnp: PnP ACPI: found 13 devices
[ 1.486856] ACPI: ACPI bus type pnp unregistered
[ 1.493369] PCI: max bus depth: 1 pci_try_num: 2
[ 1.493419] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.493436] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 1.493443] pci 0000:00:1c.1: bridge window [mem 0xe1b00000-0xe1bfffff]
[ 1.493456] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
[ 1.493459] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 1.493466] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe19fffff]
[ 1.493471] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 1.493480] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[ 1.493487] pci 0000:00:1c.5: bridge window [mem 0xe1a00000-0xe1afffff]
[ 1.493513] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.493519] pci 0000:00:1c.0: setting latency timer to 64
[ 1.493532] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.493538] pci 0000:00:1c.1: setting latency timer to 64
[ 1.493549] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.493554] pci 0000:00:1c.2: setting latency timer to 64
[ 1.493562] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.493567] pci 0000:00:1c.5: setting latency timer to 64
[ 1.493571] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.493573] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.493574] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.493576] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
[ 1.493578] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 1.493580] pci_bus 0000:02: resource 1 [mem 0xe1b00000-0xe1bfffff]
[ 1.493582] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.493583] pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe19fffff]
[ 1.493585] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
[ 1.493587] pci_bus 0000:09: resource 1 [mem 0xe1a00000-0xe1afffff]
[ 1.493650] NET: Registered protocol family 2
[ 1.493787] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.494678] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.496416] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.496633] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.496635] TCP reno registered
[ 1.496643] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.496665] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.496798] NET: Registered protocol family 1
[ 1.496811] pci 0000:00:02.0: Boot video device
[ 1.498648] PCI: CLS 64 bytes, default 64
[ 1.498686] Unpacking initramfs...
[ 1.702277] Freeing initrd memory: 10864k freed
[ 1.703640] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.703645] Placing 64MB software IO TLB between ffff8800c6a29000 - ffff8800caa29000
[ 1.703647] software IO TLB at phys 0xc6a29000 - 0xcaa29000
[ 1.703662] Simple Boot Flag at 0xf3 set to 0x1
[ 1.704133] audit: initializing netlink socket (disabled)
[ 1.704142] type=2000 audit(1321922798.548:1): initialized
[ 1.722244] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.733832] VFS: Disk quotas dquot_6.5.2
[ 1.733865] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.733933] msgmni has been set to 7688
[ 1.734117] alg: No test for stdrng (krng)
[ 1.734147] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.734150] io scheduler noop registered
[ 1.734152] io scheduler deadline registered
[ 1.734172] io scheduler cfq registered (default)
[ 1.734589] intel_idle: MWAIT substates: 0x21120
[ 1.734591] intel_idle: v0.4 model 0x2A
[ 1.734592] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.734636] ERST: Table is not found!
[ 1.734638] GHES: HEST is not enabled!
[ 1.734696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.934159] Linux agpgart interface v0.103
[ 1.934224] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.934304] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.935221] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.935325] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.935426] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.935632] i8042: Warning: Keylock active
[ 1.936862] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.936867] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.936950] mousedev: PS/2 mouse device common for all mice
[ 1.936991] rtc_cmos 00:06: RTC can wake from S4
[ 1.937103] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.937129] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.937281] cpuidle: using governor ladder
[ 1.937485] cpuidle: using governor menu
[ 1.937646] TCP cubic registered
[ 1.937736] NET: Registered protocol family 10
[ 1.937839] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.938334] Mobile IPv6
[ 1.938336] NET: Registered protocol family 17
[ 1.938339] Registering the dns_resolver key type
[ 1.938620] PM: Hibernation image not present or could not be loaded.
[ 1.938632] registered taskstats version 1
[ 1.946768] rtc_cmos 00:06: setting system clock to 2011-11-22 00:46:39 UTC (1321922799)
[ 1.946819] Initializing network drop monitor service
[ 1.947714] Freeing unused kernel memory: 556k freed
[ 1.947770] Write protecting the kernel read-only data: 6144k
[ 1.950239] Freeing unused kernel memory: 788k freed
[ 1.952407] Freeing unused kernel memory: 696k freed
[ 2.004192] udevd[61]: starting version 172
[ 2.027046] SCSI subsystem initialized
[ 2.027640] e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
[ 2.027642] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.027766] sdhci: Secure Digital Host Controller Interface driver
[ 2.027769] sdhci: Copyright(c) Pierre Ossman
[ 2.028004] sdhci-pci 0000:09:00.0: SDHCI controller found [1217:8221] (rev 5)
[ 2.034577] usbcore: registered new interface driver usbfs
[ 2.034603] usbcore: registered new interface driver hub
[ 2.037964] usbcore: registered new device driver usb
[ 2.038396] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.040990] libata version 3.00 loaded.
[ 2.067544] sdhci-pci 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.067554] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.067669] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.067704] sdhci-pci 0000:09:00.0: Invalid iomem size. You may experience problems.
[ 2.067810] sdhci-pci 0000:09:00.0: setting latency timer to 64
[ 2.067837] mmc0: no vmmc regulator found
[ 2.067852] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 2.067887] Registered led device: mmc0::
[ 2.067964] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA
[ 2.121723] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.121726] ACPI: Thermal Zone [THM] (25 C)
[ 2.360989] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 84:8f:69:f0:33:bc
[ 2.360993] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.361045] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 9041FF-0FF
[ 2.361112] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.361145] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.361149] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.361173] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.361204] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.365085] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.365101] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe1c70000
[ 2.377304] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.377352] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.377355] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.377357] usb usb1: Product: EHCI Host Controller
[ 2.377358] usb usb1: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd
[ 2.377360] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.377496] hub 1-0:1.0: USB hub found
[ 2.377500] hub 1-0:1.0: 2 ports detected
[ 2.377565] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.377590] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.377594] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.377600] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.377628] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.381513] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.381520] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe1c50000
[ 2.397324] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.397350] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.397353] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.397355] usb usb2: Product: EHCI Host Controller
[ 2.397356] usb usb2: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd
[ 2.397358] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.399204] hub 2-0:1.0: USB hub found
[ 2.399208] hub 2-0:1.0: 2 ports detected
[ 2.399279] ahci 0000:00:1f.2: version 3.0
[ 2.399297] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.399372] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 2.399408] ahci: SSS flag set, parallel bus scan disabled
[ 2.413309] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode
[ 2.413313] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 2.413319] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.445874] scsi0 : ahci
[ 2.446011] scsi1 : ahci
[ 2.446111] scsi2 : ahci
[ 2.446215] scsi3 : ahci
[ 2.446316] scsi4 : ahci
[ 2.446414] scsi5 : ahci
[ 2.549951] ata1: SATA max UDMA/133 abar m2048@0xe1c40000 port 0xe1c40100 irq 43
[ 2.549956] ata2: SATA max UDMA/133 abar m2048@0xe1c40000 port 0xe1c40180 irq 43
[ 2.549958] ata3: DUMMY
[ 2.549961] ata4: SATA max UDMA/133 abar m2048@0xe1c40000 port 0xe1c40280 irq 43
[ 2.549965] ata5: SATA max UDMA/133 abar m2048@0xe1c40000 port 0xe1c40300 irq 43
[ 2.549968] ata6: SATA max UDMA/133 abar m2048@0xe1c40000 port 0xe1c40380 irq 43
[ 2.688931] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.700905] Refined TSC clocksource calibration: 2494.334 MHz.
[ 2.700910] Switching to clocksource tsc
[ 2.821391] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.821394] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.821729] hub 1-1:1.0: USB hub found
[ 2.821807] hub 1-1:1.0: 6 ports detected
[ 2.868702] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.932609] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.966470] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.970090] ata1.00: ATA-8: SAMSUNG SSD PM810 2.5" 7mm 128GB, AXM08D1Q, max UDMA/133
[ 2.970110] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.973185] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.974449] ata1.00: configured for UDMA/133
[ 2.974626] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM81 AXM0 PQ: 0 ANSI: 5
[ 3.066706] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.066710] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.067046] hub 2-1:1.0: USB hub found
[ 3.067118] hub 2-1:1.0: 8 ports detected
[ 3.140657] usb 1-1.4: new full speed USB device number 3 using ehci_hcd
[ 3.237216] usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187
[ 3.237226] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.237232] usb 1-1.4: Product: DW375 Bluetooth Module
[ 3.237237] usb 1-1.4: Manufacturer: Dell Computer Corp
[ 3.237241] usb 1-1.4: SerialNumber: D0DF9AB482E6
[ 3.292144] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.308251] usb 1-1.5: new high speed USB device number 4 using ehci_hcd
[ 3.521291] usb 1-1.5: New USB device found, idVendor=1bcf, idProduct=2804
[ 3.521295] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.521297] usb 1-1.5: Product: Laptop_Integrated_Webcam_HD
[ 3.521298] usb 1-1.5: Manufacturer: CN018T967248719N0BP8A01
[ 3.611734] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.765571] usb 2-1.8: new full speed USB device number 3 using ehci_hcd
[ 3.884285] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5801
[ 3.884288] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.884290] usb 2-1.8: Product: 5880
[ 3.884292] usb 2-1.8: Manufacturer: Broadcom Corp
[ 3.884293] usb 2-1.8: SerialNumber: 0123456789ABCD
[ 3.884442] usb 2-1.8: config 0 descriptor??
[ 3.931341] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.250911] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.254204] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 4.254279] sd 0:0:0:0: [sda] Write Protect is off
[ 4.254282] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.254305] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.256484] sda: sda1 sda2 < sda5 >
[ 4.257058] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.258408] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.575923] device-mapper: uevent: version 1.0.3
[ 4.575986] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 224.594603] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 224.597138] alg: No test for __cbc-aes-aesni (cryptd(__driver-cbc-aes-aesni))
[ 225.183256] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 225.445610] udevd[369]: starting version 172
[ 225.509058] ACPI: acpi_idle yielding to intel_idle
[ 225.510012] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 225.510824] ACPI: Lid Switch [LID]
[ 225.510896] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 225.510902] ACPI: Power Button [PBTN]
[ 225.510965] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 225.510970] ACPI: Sleep Button [SBTN]
[ 225.511023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 225.511027] ACPI: Power Button [PWRF]
[ 225.522507] ACPI: AC Adapter [AC] (on-line)
[ 225.547824] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 225.553516] ACPI: Battery Slot [BAT0] (battery present)
[ 225.554650] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 225.563240] Bluetooth: Core ver 2.16
[ 225.563259] NET: Registered protocol family 31
[ 225.563262] Bluetooth: HCI device and connection manager initialized
[ 225.563265] Bluetooth: HCI socket layer initialized
[ 225.563267] Bluetooth: L2CAP socket layer initialized
[ 225.563272] Bluetooth: SCO socket layer initialized
[ 225.583870] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 225.592542] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 225.648926] ACPI: Battery Slot [BAT1] (battery absent)
[ 225.649177] wmi: Mapper loaded
[ 225.649775] usbcore: registered new interface driver btusb
[ 225.650092] Linux media interface: v0.10
[ 225.651995] parport_pc 00:08: [io 0x0378-0x037b]
[ 225.653801] parport_pc 00:08: [irq 5]
[ 225.664203] Linux video capture interface: v2.00
[ 225.665856] cfg80211: Calling CRDA to update world regulatory domain
[ 225.674115] [drm] Initialized drm 1.1.0 20060810
[ 225.674590] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (1bcf:2804)
[ 225.696012] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input6
[ 225.696137] usbcore: registered new interface driver uvcvideo
[ 225.696140] USB Video Class driver (1.1.1)
[ 225.707617] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 225.707620] Copyright(c) 2003-2011 Intel Corporation
[ 225.708352] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 225.708357] i915 0000:00:02.0: setting latency timer to 64
[ 225.708566] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 225.708575] iwlagn 0000:02:00.0: setting latency timer to 64
[ 225.708610] iwlagn 0000:02:00.0: pci_resource_len = 0x00002000
[ 225.708613] iwlagn 0000:02:00.0: pci_resource_base = ffffc90000678000
[ 225.708615] iwlagn 0000:02:00.0: HW Revision ID = 0x35
[ 225.708700] iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
[ 225.708732] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 225.708781] iwlagn 0000:02:00.0: L1 Disabled; Enabling L0S
[ 225.723816] iwlagn 0000:02:00.0: device EEPROM VER=0x43a, CALIB=0x6
[ 225.723820] iwlagn 0000:02:00.0: Device SKU: 0X1f0
[ 225.723822] iwlagn 0000:02:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 225.723844] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 225.755743] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 225.755753] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 225.755754] [drm] Driver supports precise vblank timestamp query.
[ 225.757245] iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
[ 225.757534] Registered led device: phy0-led
[ 225.762280] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 225.764362] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
[ 225.828324] input: Dell WMI hotkeys as /devices/virtual/input/input7
[ 226.399268] fbcon: inteldrmfb (fb0) is primary device
[ 226.400751] [drm:ironlake_update_pch_refclk] *ERROR* enabling SSC on PCH
[ 226.610766] Console: switching to colour frame buffer device 170x48
[ 226.614413] fb0: inteldrmfb frame buffer device
[ 226.614415] drm: registered panic notifier
[ 227.026871] parport_pc 00:08: activated
[ 227.026877] parport_pc 00:08: reported by Plug and Play ACPI
[ 227.525937] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)
[ 227.525946] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880128e7a3d0), AE_TIME (20110623/psparse-536)
[ 227.525957] ACPI Error: Method parse/execution failed [ECRB] (Node ffff880128e7a268), AE_TIME (20110623/psparse-536)
[ 227.525963] ACPI Error: Method parse/execution failed [ECGB] (Node ffff880128e7adf8), AE_TIME (20110623/psparse-536)
[ 227.525968] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VID_.LCD_._ADR] (Node ffff880128e7e470), AE_TIME (20110623/psparse-536)
[ 227.526053] parport_pc 00:08: disabled
[ 228.025281] ACPI: EC: input buffer is not empty, aborting transaction
[ 228.025331] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)
[ 228.025341] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880128e7a3d0), AE_TIME (20110623/psparse-536)
[ 228.025351] ACPI Error: Method parse/execution failed [ECRB] (Node ffff880128e7a268), AE_TIME (20110623/psparse-536)
[ 228.025359] ACPI Error: Method parse/execution failed [ECGB] (Node ffff880128e7adf8), AE_TIME (20110623/psparse-536)
[ 228.025365] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VID_._DOD] (Node ffff880128e7e588), AE_TIME (20110623/psparse-536)
[ 228.025376] ACPI Exception: AE_TIME, Evaluating _DOD (20110623/video-1147)
[ 230.037628] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
[ 230.119123] acpi device:37: registered as cooling_device4
[ 230.187742] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 230.188068] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 230.188139] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 230.188192] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 230.188251] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 230.188277] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 230.734860] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 230.737699] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 230.738029] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 230.738364] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 230.746851] input: HDA Intel PCH Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 230.746923] input: HDA Intel PCH Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 230.746982] input: HDA Intel PCH Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 230.747039] input: HDA Intel PCH HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 230.747297] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 230.747352] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 230.747406] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 230.948804] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 230.976031] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=650
[ 231.001177] loop: module loaded
[ 231.110931] Adding 5099516k swap on /dev/mapper/pirx-swap_1. Priority:-1 extents:1 across:5099516k
[ 231.247153] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 231.258335] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 231.711429] Bluetooth: RFCOMM TTY layer initialized
[ 231.711434] Bluetooth: RFCOMM socket layer initialized
[ 231.711436] Bluetooth: RFCOMM ver 1.11
[ 231.713657] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 231.713660] Bluetooth: BNEP filters: protocol multicast
[ 232.568416] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18
[ 232.611072] TCP lp registered
[ 271.487699] iwlagn 0000:02:00.0: L1 Disabled; Enabling L0S
[ 271.493890] iwlagn 0000:02:00.0: Radio type=0x0-0x3-0x1
[ 271.733813] iwlagn 0000:02:00.0: L1 Disabled; Enabling L0S
[ 271.740047] iwlagn 0000:02:00.0: Radio type=0x0-0x3-0x1
[ 271.843175] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 275.367898] wlan0: authenticate with fa:86:f2:e1:5a:20 (try 1)
[ 275.565870] wlan0: authenticate with fa:86:f2:e1:5a:20 (try 2)
[ 275.571554] wlan0: authenticated
[ 275.571722] wlan0: associate with fa:86:f2:e1:5a:20 (try 1)
[ 275.586628] wlan0: RX AssocResp from fa:86:f2:e1:5a:20 (capab=0x411 status=0 aid=1)
[ 275.586638] wlan0: associated
[ 275.591149] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 315.443248] iwlagn 0000:02:00.0: Tx aggregation enabled on ra = fa:86:f2:e1:5a:20 tid = 0

Jonathan Nieder 11-22-2011 12:15 AM

Bug#649540: ACPI failures on Dell Latitude D6220
 
reassign 649540 src:linux-2.6 3.1.1-1
quit

Hi,

Juliusz Chroboczek wrote:

> I'm trying to track down the low battery life on a Dell Latitude D6220
> with BIOS version A03. The ACPI thermal zone always indicates 25
> degrees (although both coretemp and i8k indicate reasonable values), and
> rebooting hangs without reboot=pci.
>
> With no parameters, the kernel complains with:
>
> [ 227.525937] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)

Is this a regression? (E.g., does the squeeze kernel behave the same
way?)

[...]
> ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)
> ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880128e7a3d0), AE_TIME (20110623/psparse-536)
> ACPI Error: Method parse/execution failed [ECRB] (Node ffff880128e7a268), AE_TIME (20110623/psparse-536)
> ACPI Error: Method parse/execution failed [ECGB] (Node ffff880128e7adf8), AE_TIME (20110623/psparse-536)
> ACPI Error: Method parse/execution failed [\_SB_.PCI0.VID_.LCD_._ADR] (Node ffff880128e7e470), AE_TIME (20110623/psparse-536)
> parport_pc 00:08: disabled
> ACPI: EC: input buffer is not empty, aborting transaction
> ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)

Yeah, sounds like nothing good.

Your best bet is probably to contact linux-acpi@vger.kernel.org,
attaching "dmesg" and "acpidump" output. If doing so, please cc
either me or this bug log so we can track it.

Thanks for a clear report.

Sincerely,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111122011539.GA15046@elie.hsd1.il.comcast.net">h ttp://lists.debian.org/20111122011539.GA15046@elie.hsd1.il.comcast.net


All times are GMT. The time now is 03:00 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.