FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 11-16-2011, 08:41 AM
Erik de Castro Lopo
 
Default Bug#648939: USB mouse stops work on battery power

Package: linux-2.6
Version: 3.1.1-1
Severity: normal


Mouse works when the laptop is connected to power but stops about 20 seconds
after power is disconnected. Re=connecting power and the mouse starts working
again. This problem did not exist in 2.6.32 but did in 3.0.


-- Package-specific info:
** Version:
Linux version 3.1.0-1-amd64 (Debian 3.1.1-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Mon Nov 14 08:02:25 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=b9dc7b52-178d-41d2-90dc-5ffb7af06598 ro quiet

** Not tainted

** Kernel log:
[ 10.921574] loop: module loaded
[ 11.780675] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.551950] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input12
[ 14.147453] fuse init (API version 7.17)
[ 16.623745] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 19.936221] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 19.992087] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 19.992532] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.502904] Bluetooth: Core ver 2.16
[ 22.502924] NET: Registered protocol family 31
[ 22.502925] Bluetooth: HCI device and connection manager initialized
[ 22.502928] Bluetooth: HCI socket layer initialized
[ 22.502929] Bluetooth: L2CAP socket layer initialized
[ 22.502936] Bluetooth: SCO socket layer initialized
[ 22.612317] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.612319] Bluetooth: BNEP filters: protocol multicast
[ 22.672165] Bluetooth: RFCOMM TTY layer initialized
[ 22.672169] Bluetooth: RFCOMM socket layer initialized
[ 22.672170] Bluetooth: RFCOMM ver 1.11
[ 23.894729] lp0: using parport0 (interrupt-driven).
[ 24.118226] ppdev: user-space parallel port driver
[ 26.105566] Bridge firewalling registered
[ 26.391395] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 26.935906] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 27.038157] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 27.448317] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 27.504127] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 27.504677] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.499398] Ebtables v2.0 registered
[ 28.619794] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 33.731596] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 33.731884] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 33.731920] ehci_hcd 0000:00:1a.7: PME# enabled
[ 33.744547] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 33.744751] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 33.744950] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 33.744990] ehci_hcd 0000:00:1d.7: PME# enabled
[ 33.828123] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xd8826c00-0xd8826fff] (PCI address [0xd8826c00-0xd8826fff])
[ 33.828144] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[ 33.828167] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 33.828198] ehci_hcd 0000:00:1a.7: PME# disabled
[ 33.828209] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 33.828216] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 33.972086] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xd8826800-0xd8826bff] (PCI address [0xd8826800-0xd8826bff])
[ 33.972107] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[ 33.972130] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 33.972171] ehci_hcd 0000:00:1d.7: PME# disabled
[ 33.972182] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 33.972189] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 34.025193] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 34.025200] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 34.073919] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 34.073935] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 34.115264] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 34.115281] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 34.818238] e1000e 0000:00:19.0: PCI INT A disabled
[ 34.818246] e1000e 0000:00:19.0: PME# enabled
[ 40.602886] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 40.693995] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 96.304601] iwlagn 0000:02:00.0: RF_KILL bit toggled to enable radio.
[ 96.388960] iwlagn 0000:02:00.0: L1 Disabled; Enabling L0S
[ 96.389338] iwlagn 0000:02:00.0: Radio type=0x0-0x2-0x0
[ 96.544411] iwlagn 0000:02:00.0: L1 Disabled; Enabling L0S
[ 96.544795] iwlagn 0000:02:00.0: Radio type=0x0-0x2-0x0
[ 96.591349] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 97.004069] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 97.176393] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
[ 97.176396] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 97.176398] usb 3-1: Product: HP Integrated Module
[ 97.176399] usb 3-1: Manufacturer: Broadcom Corp
[ 97.222873] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 97.393899] Intel AES-NI instructions are not detected.
[ 97.436594] padlock_aes: VIA PadLock not detected.
[ 97.453428] usbcore: registered new interface driver btusb
[ 104.628217] wlan0: authenticate with 00:18:39:c9:09:95 (try 1)
[ 104.631155] wlan0: authenticated
[ 104.638500] wlan0: waiting for beacon from 00:18:39:c9:09:95
[ 104.683209] wlan0: beacon received
[ 104.700042] wlan0: associate with 00:18:39:c9:09:95 (try 1)
[ 104.703392] wlan0: RX AssocResp from 00:18:39:c9:09:95 (capab=0x431 status=0 aid=1)
[ 104.703395] wlan0: associated
[ 104.710199] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 115.312033] wlan0: no IPv6 routers present
[ 1256.170264] exe (5993): /proc/5993/oom_adj is deprecated, please use /proc/5993/oom_score_adj instead.
[ 1378.998011] Monitor-Mwait will be used to enter C-2 state
[ 1379.004531] Monitor-Mwait will be used to enter C-3 state
[ 1379.393363] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 1379.524342] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 1379.742233] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 1379.766042] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 1379.979269] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 1379.982177] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 1379.983379] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 1379.988041] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 1379.988080] ehci_hcd 0000:00:1d.7: PME# enabled
[ 1381.872060] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 1381.872131] ehci_hcd 0000:00:1a.7: PME# enabled
[ 1381.896103] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 1381.940121] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 1381.968120] uhci_hcd 0000:00:1d.0: PCI INT A disabled

** Model information
sys_vendor: Hewlett-Packard
product_name: HP EliteBook 6930p
product_version: F.16
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68PCU Ver. F.16
board_vendor: Hewlett-Packard
board_name: 30DB
board_version: KBC Version 87.2A

** Loaded modules:
Module Size Used by
cryptd 14517 0
aes_x86_64 16796 3
aes_generic 33026 1 aes_x86_64
ecb 12737 1
btusb 17502 2
ip6table_filter 12540 0
ip6_tables 22175 1 ip6table_filter
ebtable_nat 12580 0
ebtables 26235 1 ebtable_nat
ipt_MASQUERADE 12594 3
iptable_nat 12928 1
nf_nat 18242 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 14078 4 iptable_nat,nf_nat
nf_defrag_ipv4 12483 1 nf_conntrack_ipv4
xt_state 12503 1
nf_conntrack 52670 5 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv 4,xt_state
ipt_REJECT 12502 2
xt_CHECKSUM 12471 1
iptable_mangle 12536 1
acpi_cpufreq 12935 1
mperf 12453 1 acpi_cpufreq
cpufreq_powersave 12454 0
cpufreq_stats 12866 0
xt_tcpudp 12570 5
cpufreq_userspace 12576 0
iptable_filter 12536 1
cpufreq_conservative 13147 0
ip_tables 22042 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 19028 12 ip6table_filter,ip6_tables,ebtables,ipt_MASQUERADE ,iptable_nat,xt_state,ipt_REJECT,xt_CHECKSUM,iptab le_mangle,xt_tcpudp,iptable_filter,ip_tables
bridge 66534 0
stp 12392 1 bridge
ppdev 12763 0
lp 17149 0
rfcomm 33622 10
bnep 17567 2
bluetooth 119290 23 btusb,rfcomm,bnep
binfmt_misc 12957 1
uinput 17440 1
fuse 61981 3
loop 22597 0
firewire_sbp2 18077 0
kvm_intel 121792 0
kvm 278183 1 kvm_intel
pata_pcmcia 16836 1
uvcvideo 57788 0
videodev 70858 1 uvcvideo
media 18148 2 uvcvideo,videodev
v4l2_compat_ioctl32 16567 1 videodev
snd_hda_codec_analog 77709 1
i915 348449 3
arc4 12458 2
tpm_infineon 12985 0
pcmcia 32691 1 pata_pcmcia
snd_hda_intel 26182 4
iwlagn 166592 0
snd_hda_codec 72799 2 snd_hda_codec_analog,snd_hda_intel
mac80211 183093 1 iwlagn
drm_kms_helper 27227 1 i915
yenta_socket 22899 0
hp_wmi 13329 0
drm 167371 4 i915,drm_kms_helper
sparse_keymap 12760 1 hp_wmi
pcmcia_rsrc 17533 1 yenta_socket
joydev 17266 0
snd_hwdep 13186 1 snd_hda_codec
snd_pcm 63744 3 snd_hda_intel,snd_hda_codec
hp_accel 21104 0
pcmcia_core 18294 3 pcmcia,yenta_socket,pcmcia_rsrc
lis3lv02d 17832 1 hp_accel
wmi 13243 1 hp_wmi
i2c_algo_bit 12841 1 i915
parport_pc 22364 1
parport 31858 3 ppdev,lp,parport_pc
snd_seq 45093 0
snd_timer 22917 3 snd_pcm,snd_seq
snd_seq_device 13176 1 snd_seq
evdev 17562 18
i2c_core 23876 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
cfg80211 132703 2 iwlagn,mac80211
ac 12624 0
snd 52798 14 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,s nd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
battery 13109 0
power_supply 13475 2 ac,battery
tpm_tis 17454 0
tpm 17862 2 tpm_infineon,tpm_tis
tpm_bios 12948 1 tpm
pcspkr 12579 0
soundcore 13065 1 snd
input_polldev 12906 1 lis3lv02d
snd_page_alloc 13003 2 snd_hda_intel,snd_pcm
container 12581 0
video 17628 1 i915
psmouse 55543 0
serio_raw 12850 0
rfkill 19012 5 bluetooth,hp_wmi,cfg80211
processor 27949 3 acpi_cpufreq
button 12937 1 i915
ext4 312988 2
mbcache 13065 1 ext4
jbd2 62015 1 ext4
crc16 12343 2 bluetooth,ext4
dm_mod 63353 0
usbhid 36379 0
hid 77192 1 usbhid
sg 25874 0
sd_mod 36136 4
crc_t10dif 12348 1 sd_mod
sr_mod 21899 0
cdrom 35401 1 sr_mod
uhci_hcd 26865 0
sdhci_pci 13483 0
sdhci 26577 1 sdhci_pci
firewire_ohci 31530 0
mmc_core 63754 1 sdhci
firewire_core 48407 2 firewire_sbp2,firewire_ohci
crc_itu_t 12347 1 firewire_core
ata_generic 12479 0
ahci 24997 3
libahci 22860 1 ahci
ehci_hcd 40215 0
libata 140545 4 pata_pcmcia,ata_generic,ahci,libahci
usbcore 124095 6 btusb,uvcvideo,usbhid,uhci_hcd,ehci_hcd
e1000e 125122 0
thermal 17383 0
thermal_sys 18040 3 video,processor,thermal
scsi_mod 162376 5 firewire_sbp2,sg,sd_mod,sr_mod,libata

** Network interface configuration:

auto lo
iface lo inet loopback





** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether d8:d3:85:99:04:09 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:21:6a:a5:2c:6e brd ff:ff:ff:ff:ff:ff
inet 192.168.200.111/24 brd 192.168.200.255 scope global wlan0
inet6 fe80::221:6aff:fea5:2c6e/64 scope link
valid_lft forever preferred_lft forever
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
link/ether 8e:7e:37:8d:c7:89 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 18900 298 0 0 0 0 0 0 18900 298 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 53019544 50117 0 0 0 0 0 0 5289598 37061 0 0 0 0 0 0
virbr0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

*** Protocol statistics:
Ip:
49657 total packets received
0 forwarded
0 incoming packets discarded
49657 incoming packets delivered
37329 requests sent out
47 dropped because of missing route
Icmp:
124 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 124
124 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 124
IcmpMsg:
InType3: 124
OutType3: 124
Tcp:
707 active connections openings
0 passive connection openings
30 failed connection attempts
39 connection resets received
25 connections established
48891 segments received
36055 segments send out
515 segments retransmited
0 bad segments received.
172 resets sent
Udp:
504 packets received
124 packets to unknown port received.
0 packet receive errors
634 packets sent
UdpLite:
TcpExt:
249 TCP sockets finished time wait in fast timer
1196 delayed acks sent
Quick ack mode was activated 54 times
38839 packet headers predicted
3640 acknowledgments not containing data payload received
3197 predicted acknowledgments
15 congestion windows recovered without slow start after partial ack
90 other TCP timeouts
54 DSACKs sent for old packets
4 DSACKs received
16 connections reset due to unexpected data
31 connections reset due to early user close
42 connections aborted due to timeout
TCPSackShiftFallback: 4
IpExt:
InMcastPkts: 52
OutMcastPkts: 40
InOctets: 52305684
OutOctets: 4120270
InMcastOctets: 6658
OutMcastOctets: 6290


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 7138 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>

00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d8827000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:03.2 IDE interface [0101]: Intel Corporation Mobile 4 Series Chipset PT IDER Controller [8086:2a46] (rev 07) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at 7130 [disabled] [size=8]
Region 1: I/O ports at 714c [disabled] [size=4]
Region 2: I/O ports at 7128 [disabled] [size=8]
Region 3: I/O ports at 7148 [disabled] [size=4]
Region 4: I/O ports at 7100 [disabled] [size=16]
Capabilities: <access denied>

00:03.3 Serial controller [0700]: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection [8086:2a47] (rev 07) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 7120 [size=8]
Region 1: Memory at d8825000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d8800000 (32-bit, non-prefetchable) [disabled] [size=128K]
Region 1: Memory at d8824000 (32-bit, non-prefetchable) [disabled] [size=4K]
Region 2: I/O ports at 70e0 [disabled] [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 70c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 70a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 7080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at d8826c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at d8820000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d8700000-d87fffff
Prefetchable memory behind bridge: 00000000d8f00000-00000000d90fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: d8600000-d86fffff
Prefetchable memory behind bridge: 00000000d8d00000-00000000d8efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=43, sec-latency=0
I/O behind bridge: 00005000-00006fff
Memory behind bridge: d4600000-d85fffff
Prefetchable memory behind bridge: 00000000d8b00000-00000000d8cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=44, subordinate=84, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d0600000-d45fffff
Prefetchable memory behind bridge: 00000000d8900000-00000000d8afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 7060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 7040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 7020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 20
Region 0: Memory at d8826800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=85, subordinate=89, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0500000-d05fffff
Prefetchable memory behind bridge: 00000000dc000000-00000000dfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at 7118 [size=8]
Region 1: I/O ports at 7144 [size=4]
Region 2: I/O ports at 7110 [size=8]
Region 3: I/O ports at 7140 [size=4]
Region 4: I/O ports at 7000 [size=32]
Region 5: Memory at d8826000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

02:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4236]
Subsystem: Intel Corporation Device [8086:1011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at d8600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn

85:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 06) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0501000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

85:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 25)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: Memory at d0501900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci

85:09.2 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev bb)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 22
Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=85, secondary=86, subordinate=89, sec-latency=176
Memory window 0: dc000000-dffff000 (prefetchable)
Memory window 1: f0000000-f3fff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002000-000020ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b053 Chicony Electronics Co., Ltd
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]


-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.1.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.utf8, LC_CTYPE=en_AU.utf8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.1.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.40
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.3
ii module-init-tools 3.16-1

Versions of packages linux-image-3.1.0-1-amd64 recommends:
ii firmware-linux-free 3

Versions of packages linux-image-3.1.0-1-amd64 suggests:
pn grub-pc 1.99-12
pn linux-doc-3.1 <none>

Versions of packages linux-image-3.1.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi 0.34
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>

-- debconf information:
linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false
linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true
* linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111116204134.e3afd7f9a7e2071908d80a8d@mega-nerd.com">http://lists.debian.org/20111116204134.e3afd7f9a7e2071908d80a8d@mega-nerd.com
 
Old 11-16-2011, 09:23 PM
Jonathan Nieder
 
Default Bug#648939: USB mouse stops work on battery power

Erik de Castro Lopo wrote:

> Mouse works when the laptop is connected to power but stops about 20 seconds
> after power is disconnected. Re=connecting power and the mouse starts working
> again. This problem did not exist in 2.6.32 but did in 3.0.

Weird. Sounds like ACPI breakage. Can you bisect? (A few iterations to
narrow down the regression range would already be pretty helpful.)

Thanks,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111116222324.GF14251@elie.hsd1.il.comcast.net">h ttp://lists.debian.org/20111116222324.GF14251@elie.hsd1.il.comcast.net
 
Old 11-16-2011, 09:41 PM
Erik de Castro Lopo
 
Default Bug#648939: USB mouse stops work on battery power

Jonathan Nieder wrote:

> Erik de Castro Lopo wrote:
>
> > Mouse works when the laptop is connected to power but stops about 20 seconds
> > after power is disconnected. Re=connecting power and the mouse starts working
> > again. This problem did not exist in 2.6.32 but did in 3.0.
>
> Weird. Sounds like ACPI breakage. Can you bisect? (A few iterations to
> narrow down the regression range would already be pretty helpful.)

I've looked in the repo and the kernel versions seem to jump from
2.6.32 to 3.0.0. Are there debian packages for kernels between
2.6.32 and 3.0.0 or do i have to compile them myself?

Erik
--
----------------------------------------------------------------------
Erik de Castro Lopo
http://www.mega-nerd.com/



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111117094100.71bd2d4ec4e56850da3aca96@mega-nerd.com">http://lists.debian.org/20111117094100.71bd2d4ec4e56850da3aca96@mega-nerd.com
 
Old 11-16-2011, 09:48 PM
Jonathan Nieder
 
Default Bug#648939: USB mouse stops work on battery power

Erik de Castro Lopo wrote:

> I've looked in the repo and the kernel versions seem to jump from
> 2.6.32 to 3.0.0. Are there debian packages for kernels between
> 2.6.32 and 3.0.0 or do i have to compile them myself?

Intermediate versions are at <http://snapshot.debian.org/>. Sorry,
I should have mentioned so before.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111116224816.GB17851@elie.hsd1.il.comcast.net">h ttp://lists.debian.org/20111116224816.GB17851@elie.hsd1.il.comcast.net
 
Old 11-20-2011, 09:47 AM
Erik de Castro Lopo
 
Default Bug#648939: USB mouse stops work on battery power

Jonathan Nieder wrote:

> Intermediate versions are at <http://snapshot.debian.org/>. Sorry,
> I should have mentioned so before.

Both 2.6.37-2-amd64 and 2.6.38-2-amd64 have the same problem.

Trying to find more kernels to test.

Erik
--
----------------------------------------------------------------------
Erik de Castro Lopo
http://www.mega-nerd.com/



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111120214745.1c245fd8cbea11e49d42151e@mega-nerd.com">http://lists.debian.org/20111120214745.1c245fd8cbea11e49d42151e@mega-nerd.com
 
Old 11-20-2011, 09:59 AM
Jonathan Nieder
 
Default Bug#648939: USB mouse stops work on battery power

found 648939 linux-2.6/2.6.37-2
quit

Erik de Castro Lopo wrote:

> Both 2.6.37-2-amd64 and 2.6.38-2-amd64 have the same problem.

BTW, a more useful version number is that shown in parentheses by
"cat /proc/version" (also shown by "dpkg-query -W
linux-image-$(uname -r)"), since it changes more often than the
package name.

> Trying to find more kernels to test.

The list of available versions is at [1]. Thanks for your patience.

Sincerely,
Jonathan

[1] http://snapshot.debian.org/package/linux-2.6/



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111120105957.GA20301@elie.hsd1.il.comcast.net">h ttp://lists.debian.org/20111120105957.GA20301@elie.hsd1.il.comcast.net
 
Old 11-20-2011, 10:23 AM
Erik de Castro Lopo
 
Default Bug#648939: USB mouse stops work on battery power

Jonathan Nieder wrote:

> found 648939 linux-2.6/2.6.37-2
> quit
>
> Erik de Castro Lopo wrote:
>
> > Both 2.6.37-2-amd64 and 2.6.38-2-amd64 have the same problem.
>
> BTW, a more useful version number is that shown in parentheses by
> "cat /proc/version" (also shown by "dpkg-query -W
> linux-image-$(uname -r)"), since it changes more often than the
> package name.

Noted.

Here are two more data points (version numbers from /proc/version):

Good 2.6.32-5-amd64 (Debian 2.6.32-39)
Bad 2.6.33-2-amd64 (Debian 2.6.33-1~experimental.5)

Are those two close enough?

Erik
--
----------------------------------------------------------------------
Erik de Castro Lopo
http://www.mega-nerd.com/



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111120222310.730e83d8cd0f2bd1007baede@mega-nerd.com">http://lists.debian.org/20111120222310.730e83d8cd0f2bd1007baede@mega-nerd.com
 
Old 11-20-2011, 10:31 AM
Jonathan Nieder
 
Default Bug#648939: USB mouse stops work on battery power

found 648939 linux-2.6/2.6.33-1~experimental.5
quit

Erik de Castro Lopo wrote:

> Here are two more data points (version numbers from /proc/version):
>
> Good 2.6.32-5-amd64 (Debian 2.6.32-39)
> Bad 2.6.33-2-amd64 (Debian 2.6.33-1~experimental.5)

Ah, that's a much more manageable range.

> Are those two close enough?

I assume 2.6.33-1~experimental.3 reproduces it, too?

If so, that's as much as we can learn from the pre-compiled packages,
yes. I'll try to find time tomorrow to look through the package list
and see if any of the changes in 2.6.33 jumps out at me.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111120113158.GC20301@elie.hsd1.il.comcast.net">h ttp://lists.debian.org/20111120113158.GC20301@elie.hsd1.il.comcast.net
 
Old 11-20-2011, 10:33 AM
Jonathan Nieder
 
Default Bug#648939: USB mouse stops work on battery power

Jonathan Nieder wrote:

> If so, that's as much as we can learn from the pre-compiled packages,
> yes. I'll try to find time tomorrow to look through the package list
> and see if any of the changes in 2.6.33 jumps out at me.

By "package list" I meant "upstream changelog". Sorry for the thinko.

Sleepily,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111120113327.GD20301@elie.hsd1.il.comcast.net">h ttp://lists.debian.org/20111120113327.GD20301@elie.hsd1.il.comcast.net
 
Old 11-20-2011, 06:17 PM
Erik de Castro Lopo
 
Default Bug#648939: USB mouse stops work on battery power

Jonathan Nieder wrote:

> found 648939 linux-2.6/2.6.33-1~experimental.5
> quit
>
> Erik de Castro Lopo wrote:
>
> > Here are two more data points (version numbers from /proc/version):
> >
> > Good 2.6.32-5-amd64 (Debian 2.6.32-39)
> > Bad 2.6.33-2-amd64 (Debian 2.6.33-1~experimental.5)
>
> Ah, that's a much more manageable range.
>
> > Are those two close enough?
>
> I assume 2.6.33-1~experimental.3 reproduces it, too?

Yes, problem was reproduced in 2.6.33-1~experimental.3. No problem
with 2.6.32-39.

> If so, that's as much as we can learn from the pre-compiled packages,
> yes. I'll try to find time tomorrow to look through the package list
> and see if any of the changes in 2.6.33 jumps out at me.

Great. Thanks.

Erik
--
----------------------------------------------------------------------
Erik de Castro Lopo
http://www.mega-nerd.com/



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111121061702.b93295bb2c3a26c73f8afdb7@mega-nerd.com">http://lists.debian.org/20111121061702.b93295bb2c3a26c73f8afdb7@mega-nerd.com
 

Thread Tools




All times are GMT. The time now is 07:29 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org