Bug#648310: pegasus: Pegasus driver in kernel 3.0.0-1-amd64 fails when using USB network adapter.
Package: linux-2.6
Version: 3.0.0-3 Severity: grave File: pegasus Justification: renders package unusable Please see fault in dmesg: pegasus 4-1:1.0: eth3: update_eth_regs_async, status -22 Utilizing USB network adapter listed as follows: 07a6:0986 ADMtek, Inc. AN986 Pegasus Ethernet ifconfig, ethtool, etc allow configuration of the device but no data will actually pass through it. I turned down the other ethernet adapters on the machine and was unable to ping past the first directly connected host to the Pegasus adapter. -- Package-specific info: ** Version: Linux version 3.0.0-1-amd64 (Debian 3.0.0-3) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 16:21:11 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=58ebd269-072a-4ff9-91e5-590efa23f4db ro quiet ** Not tainted ** Kernel log: [ 4.241765] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.241767] [drm] Driver supports precise vblank timestamp query. [ 4.241778] [drm] radeon: irq initialized. [ 4.241784] mtrr: type mismatch for f0000000,8000000 old: write-back new: write-combining [ 4.241787] [drm] Detected VRAM RAM=128M, BAR=128M [ 4.241789] [drm] RAM width 128bits DDR [ 4.241851] [TTM] Zone kernel: Available graphics memory: 4034950 kiB. [ 4.241853] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 4.241855] [TTM] Initializing pool allocator. [ 4.241883] [drm] radeon: 128M of VRAM memory ready [ 4.241886] [drm] radeon: 512M of GTT memory ready. [ 4.241904] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 4.245780] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 4.252865] radeon 0000:01:05.0: WB enabled [ 4.253252] [drm] Loading RS690/RS740 Microcode [ 4.341491] [drm] radeon: ring at 0x00000000A0001000 [ 4.341510] [drm] ring test succeeded in 1 usecs [ 4.341662] [drm] radeon: ib pool ready. [ 4.341736] [drm] ib test succeeded in 0 usecs [ 4.341783] failed to evaluate ATIF got AE_BAD_PARAMETER [ 4.342045] [drm] Radeon Display Connectors [ 4.342047] [drm] Connector 0: [ 4.342048] [drm] VGA [ 4.342051] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 4.342053] [drm] Encoders: [ 4.342055] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.342057] [drm] Connector 1: [ 4.342058] [drm] S-video [ 4.342059] [drm] Encoders: [ 4.342061] [drm] TV1: INTERNAL_KLDSCP_DAC1 [ 4.342063] [drm] Connector 2: [ 4.342064] [drm] HDMI-A [ 4.342067] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 4.342069] [drm] Encoders: [ 4.342070] [drm] DFP3: INTERNAL_LVTM1 [ 4.393126] [drm] Radeon display connector VGA-1: Found valid EDID [ 4.402631] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID [ 4.555138] [drm] fb mappable at 0xF0040000 [ 4.555141] [drm] vram apper at 0xF0000000 [ 4.555143] [drm] size 5242880 [ 4.555145] [drm] fb depth is 24 [ 4.555146] [drm] pitch is 5120 [ 4.555232] fbcon: radeondrmfb (fb0) is primary device [ 4.582047] Console: switching to colour frame buffer device 160x64 [ 4.591920] fb0: radeondrmfb frame buffer device [ 4.591922] drm: registered panic notifier [ 4.591928] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:05.0 on minor 0 [ 4.592732] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.592799] HDA Intel 0000:01:05.2: irq 42 for MSI/MSI-X [ 7.620009] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 8.624010] hda-intel: No response from codec, disabling MSI: last cmd=0x000f0000 [ 9.628012] hda-intel: Codec #0 probe error; disabling it... [ 11.772009] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503 [ 12.219260] Adding 4882428k swap on /dev/sda2. Priority:-1 extents:1 across:4882428k [ 12.224843] EXT4-fs (sda1): re-mounted. Opts: (null) [ 12.544956] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.643031] loop: module loaded [ 14.029671] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 14.041068] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 14.781227] r8169 0000:02:00.0: eth2: link down [ 14.781235] r8169 0000:02:00.0: eth2: link down [ 14.782592] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 14.895616] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.913809] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 16.746723] r8169 0000:02:00.0: eth2: link up [ 16.748079] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 23.973241] vortex[1454] general protection ip:7f5760b7bcaa sp:7fff4e41e050 error:0 in libmysqlclient.so.16.0.0[7f5760af0000+1cf000] [ 24.475371] sshd (1654): /proc/1654/oom_adj is deprecated, please use /proc/1654/oom_score_adj instead. [ 327.700020] usb 4-1: new full speed USB device number 2 using ohci_hcd [ 327.875053] usb 4-1: New USB device found, idVendor=07a6, idProduct=0986 [ 327.875057] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 327.875060] usb 4-1: Product: USB to 10/100TX [ 327.875063] usb 4-1: Manufacturer: Admtek Inc. [ 327.875065] usb 4-1: SerialNumber: 0001 [ 327.922619] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 327.995701] pegasus 4-1:1.0: eth0, ADMtek AN986 "Pegasus" USB Ethernet (evaluation board), 00:48:54:b2:0d:0b [ 327.995726] usbcore: registered new interface driver pegasus [ 328.076615] udev[561]: renamed network interface eth0 to eth3 [ 394.337072] pegasus 4-1:1.0: eth3: update_eth_regs_async, status -22 [ 394.340498] pegasus 4-1:1.0: eth3: update_eth_regs_async, status -22 [ 543.519734] r8169 0000:02:00.0: eth2: link down [ 543.519746] r8169 0000:02:00.0: eth2: link down [ 543.521328] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 543.743364] pegasus 4-1:1.0: eth3: update_eth_regs_async, status -22 [ 545.583247] r8169 0000:02:00.0: eth2: link up [ 545.584618] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 578.785337] r8169 0000:02:00.0: eth2: link down [ 578.785348] r8169 0000:02:00.0: eth2: link down [ 578.786724] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 580.816738] r8169 0000:02:00.0: eth2: link up [ 580.818055] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 640.155287] r8169 0000:02:00.0: eth2: link down [ 640.155299] r8169 0000:02:00.0: eth2: link down [ 640.156856] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 640.372380] pegasus 4-1:1.0: eth3: update_eth_regs_async, status -22 [ 642.266533] r8169 0000:02:00.0: eth2: link up [ 642.267864] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 846.102125] pegasus 4-1:1.0: eth3: update_eth_regs_async, status -22 [ 846.105573] pegasus 4-1:1.0: eth3: update_eth_regs_async, status -22 [ 846.110328] pegasus 4-1:1.0: eth3: update_eth_regs_async, status -22 ** Model information sys_vendor: MICRO-STAR INTERANTIONAL CO.,LTD product_name: MS-7368 product_version: 1.0 chassis_vendor: To Be Filled By O.E.M. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: V1.5 board_vendor: MICRO-STAR INTERANTIONAL CO.,LTD board_name: MS-7368 board_version: 1.0 ** Loaded modules: Module Size Used by pegasus 22294 0 iptable_filter 12536 1 iptable_mangle 12536 0 iptable_nat 12928 0 nf_nat 18306 1 iptable_nat nf_conntrack_ipv4 18176 3 iptable_nat,nf_nat nf_conntrack 57034 3 iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 12483 1 nf_conntrack_ipv4 ip_tables 22131 3 iptable_filter,iptable_mangle,iptable_nat x_tables 19024 4 iptable_filter,iptable_mangle,iptable_nat,ip_table s loop 22711 0 firewire_sbp2 18062 0 snd_hda_codec_hdmi 26321 1 snd_hda_intel 26140 0 snd_hda_codec 72699 2 snd_hda_codec_hdmi,snd_hda_intel radeon 652630 1 snd_hwdep 13186 1 snd_hda_codec ttm 52979 1 radeon drm_kms_helper 27216 1 radeon drm 163280 3 radeon,ttm,drm_kms_helper snd_pcm 68104 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_timer 22581 1 snd_pcm snd 52823 6 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd _hwdep,snd_pcm,snd_timer processor 27942 0 thermal_sys 17949 1 processor i2c_algo_bit 12850 1 radeon soundcore 13152 1 snd power_supply 13475 1 radeon snd_page_alloc 13043 2 snd_hda_intel,snd_pcm shpchp 31343 0 tpm_tis 13152 0 tpm 17819 1 tpm_tis edac_core 35343 0 sp5100_tco 12900 0 pcspkr 12579 0 i2c_piix4 12536 0 psmouse 55656 0 i2c_core 23909 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4 edac_mce_amd 17103 0 k8temp 12531 0 serio_raw 12846 0 pci_hotplug 27232 1 shpchp tpm_bios 12944 1 tpm evdev 17558 0 button 12930 0 ext4 313917 3 mbcache 13066 1 ext4 jbd2 62574 1 ext4 crc16 12343 1 ext4 sg 25985 0 sr_mod 21811 0 cdrom 35093 1 sr_mod sd_mod 36259 6 crc_t10dif 12348 1 sd_mod usbhid 40516 0 ata_generic 12479 0 hid 73172 1 usbhid firewire_ohci 35553 0 ahci 25089 4 libahci 22767 1 ahci pata_atiixp 12697 0 r8169 42411 0 mii 12675 2 pegasus,r8169 firewire_core 48371 2 firewire_sbp2,firewire_ohci ohci_hcd 26576 0 libata 149043 4 ata_generic,ahci,libahci,pata_atiixp crc_itu_t 12347 1 firewire_core floppy 53265 0 scsi_mod 162442 5 firewire_sbp2,sg,sr_mod,sd_mod,libata ehci_hcd 40090 0 usbcore 128338 5 pegasus,usbhid,ohci_hcd,ehci_hcd ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] Subsystem: ATI Technologies Inc RS690 Host Bridge [1002:7910] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 Bus: primary=00, secondary=01, subordinate=01, sec-latency=128 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe800000-fe9fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7327] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at a000 [size=4] Region 2: I/O ports at 9000 [size=8] Region 3: I/O ports at 8000 [size=4] Region 4: I/O ports at 7000 [size=16] Region 5: Memory at fe7ff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe7fb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe7fa000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at fe7ff000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Capabilities: <access denied> Kernel driver in use: piix4_smbus 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Kernel driver in use: pata_atiixp 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr+ DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690 [Radeon X1200 Series] [1002:791e] (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7327] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0000000 (64-bit, prefetchable) [size=128M] Region 2: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at c000 [size=256] Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon 01:05.2 Audio device [0403]: ATI Technologies Inc Radeon X1200 Series Audio Controller [1002:7919] Subsystem: ATI Technologies Inc Radeon X1200 Series Audio Controller [1002:7919] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe9e8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:368c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at d800 [size=256] Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 03:06.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:368d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 128 (8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at e800 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 07a6:0986 ADMtek, Inc. AN986 Pegasus Ethernet Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 045e:001e Microsoft Corp. IntelliMouse Explorer Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-3.0.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs ii linux-base 3.3 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-3.0.0-1-amd64 recommends: ii firmware-linux-free 3 Binary firmware for various driver Versions of packages linux-image-3.0.0-1-amd64 suggests: ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version pn linux-doc-3.0. <none> (no description available) Versions of packages linux-image-3.0.0-1-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.33 Binary firmware for various driver ii firmware-linux-nonfree 0.33 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk: linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false * linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64: -- To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org Archive: 20111110135659.5476.98774.reportbug@cinderella">ht tp://lists.debian.org/20111110135659.5476.98774.reportbug@cinderella |
Bug#648310: pegasus: Pegasus driver in kernel 3.0.0-1-amd64 fails when using USB network adapter.
Hi,
Matthew Goff wrote: > Version: 3.0.0-3 [...] > Please see fault in dmesg: pegasus 4-1:1.0: eth3: update_eth_regs_async, status -22 > Utilizing USB network adapter listed as follows: 07a6:0986 ADMtek, Inc. AN986 Pegasus Ethernet > > ifconfig, ethtool, etc allow configuration of the device but no data will > actually pass through it. I turned down the other ethernet adapters on the > machine and was unable to ping past the first directly connected host to the > Pegasus adapter. Thanks for reporting. Is this a regression? If so, what was the last working kernel version and first broken one you found? If not, has this card worked on any other OS before? Jonathan who never had trouble with his SMC 2202USB/ETH (EZ Connect USB) using pegasus on lenny, but is not sure where that adaptor is now -- To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org Archive: 20111110173759.GE13412@elie.hsd1.il.comcast.net">h ttp://lists.debian.org/20111110173759.GE13412@elie.hsd1.il.comcast.net |
Bug#648310: pegasus: Pegasus driver in kernel 3.0.0-1-amd64 fails when using USB network adapter.
This is actually my first attempt to use this adapter after digging it out of a box. I booted my box back into 2.6.32 and have the same results. All other machines in my home are on Win 7 x64 which no longer supports the adapter.*
I did manage to find some WinXP x64 drivers that 7 was able to accept, and the adapter did work and get me out onto the web, but then faulted out with no apparent cause. Given the inability to get this working on my Debian machine and the lack of proper Windows drivers to validate the adapter is working I'd venture you could close this report rather than chase what may end up being a faulty adapter on my part. Thanks,Matt Goff On Thu, Nov 10, 2011 at 11:37 AM, Jonathan Nieder <jrnieder@gmail.com> wrote: Hi, Matthew Goff wrote: > Version: 3.0.0-3 [...] > Please see fault in dmesg: pegasus 4-1:1.0: eth3: update_eth_regs_async, status -22 > Utilizing USB network adapter listed as follows: 07a6:0986 ADMtek, Inc. AN986 Pegasus Ethernet > > ifconfig, ethtool, etc allow configuration of the device but no data will > actually pass through it. I turned down the other ethernet adapters on the > machine and was unable to ping past the first directly connected host to the > Pegasus adapter. Thanks for reporting. Is this a regression? *If so, what was the last working kernel version and first broken one you found? *If not, has this card worked on any other OS before? Jonathan who never had trouble with his SMC 2202USB/ETH (EZ Connect USB) using pegasus on lenny, but is not sure where that adaptor is now |
Bug#648310: pegasus: Pegasus driver in kernel 3.0.0-1-amd64 fails when using USB network adapter.
forcemerge 586289 648310
tags 586289 + moreinfo quit Hi again, Matthew Goff wrote: > This is actually my first attempt to use this adapter after digging it out > of a box. I booted my box back into 2.6.32 and have the same results. All > other machines in my home are on Win 7 x64 which no longer supports the > adapter. > > I did manage to find some WinXP x64 drivers that 7 was able to accept, and > the adapter did work and get me out onto the web, but then faulted out with > no apparent cause. Very weird, but I'm reopening the bug since someone else reported similar trouble getting a pegasus card to cooperate. Maybe the two examples can shed light on each other. -- To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org Archive: 20111123133842.GA6841@elie.hsd1.il.comcast.net">ht tp://lists.debian.org/20111123133842.GA6841@elie.hsd1.il.comcast.net |
| All times are GMT. The time now is 06:36 PM. |
VBulletin, Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.