FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 11-08-2011, 08:48 PM
Michel Normand
 
Default Bug#648088: rt2x00lib: Kernel Oops rt2x00queue_init_queues of Linux 2.6.32-5-686 Debian 6.0.3

Package: linux-2.6
Version: 2.6.32-38
Severity: normal
File: rt2x00lib

Kernel Oops if I am trying to use the wireless D-link pci card.
I am removing manually the packages firmware-ralink to avoid the card to be initialized and generate the related Oops.

-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-38) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 04:15:24 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=c65d3d24-40b5-4fda-b5ad-53c147e8a6ad ro single

** Not tainted

** Kernel log:
Nov 7 10:22:28 DIM5000 kernel: [ 330.956522] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
Nov 7 10:22:28 DIM5000 kernel: [ 330.958532] BUG: unable to handle kernel NULL pointer dereference at (null)
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] IP: [<f83a9a44>] rt2x00queue_init_queues+0x1f/0x59 [rt2x00lib]
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] *pde = 00000000
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] Oops: 0002 [#1] SMP
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] last sysfs file: /sys/devices/virtual/net/lo/type
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] Modules linked in: binfmt_misc btrfs zlib_deflate crc32c libcrc32c ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs exportfs reiserfs ext4 jbd2 crc16 ext2 fuse loop usblp usbhid hid arc4 ecb snd_intel8x0 rt61pci crc_itu_t b44 snd_ac97_codec i915 ac97_bus rt2x00pci ssb snd_pcm rt2x00lib mmc_core drm_kms_helper sg snd_seq led_class uhci_hcd ehci_hcd drm pcmcia pcmcia_core i2c_algo_bit sr_mod usbcore dcdbas snd_timer mac80211 i2c_i801 mii snd_seq_device video cfg80211 rfkill parport_pc pcspkr parport snd eeprom_93cx6 nls_base cdrom processor output rng_core i2c_core evdev button soundcore snd_page_alloc psmouse serio_raw ext3 jbd mbcache sd_mod crc_t10dif ata_generic ata_piix libata thermal thermal_sys scsi_mod
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003]
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] Pid: 1998, comm: wpa_supplicant Not tainted (2.6.32-5-686 #1) Dimension 5000
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] EIP: 0060:[<f83a9a44>] EFLAGS: 00210202 CPU: 0
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] EIP is at rt2x00queue_init_queues+0x1f/0x59 [rt2x00lib]
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] EAX: 00000000 EBX: ef614c00 ECX: 00000000 EDX: 00000000
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] ESI: 00000001 EDI: ef4f3a40 EBP: ef48cba0 ESP: f6553e30
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] Process wpa_supplicant (pid: 1998, ti=f6552000 task=ef63a640 task.ti=f6552000)
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] Stack:
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] ef4f3a40 00000000 ef4f3bb4 f83a89ed ef4f3a40 00000000 f83a8af4 ef48c800
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] <0> ef4f3260 00000000 f80bc8e8 ef48c800 00000000 ef4f3814 ef48c800 0000000d
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] <0> ef48c800 00001003 00000000 ef48c800 ef48c830 f80ca9c8 00000001 c11daefd
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] Call Trace:
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<f83a89ed>] ? rt2x00lib_stop+0x4f/0xb4 [rt2x00lib]
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<f83a8af4>] ? rt2x00lib_start+0xa2/0xaa [rt2x00lib]
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<f80bc8e8>] ? ieee80211_open+0x232/0x585 [mac80211]
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<c11daefd>] ? dev_open+0x90/0xcc
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<c11da7c7>] ? dev_change_flags+0xa2/0x153
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<c1219493>] ? devinet_ioctl+0x236/0x4cb
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<c11ccbe1>] ? sock_ioctl+0x1c9/0x1ee
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<c11cca18>] ? sock_ioctl+0x0/0x1ee
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<c10bdce0>] ? vfs_ioctl+0x1c/0x5f
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<c10be274>] ? do_vfs_ioctl+0x4aa/0x4e5
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<c11cd10b>] ? sock_map_fd+0x46/0x50
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<c1270478>] ? do_page_fault+0x2f1/0x307
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<c10be2f0>] ? sys_ioctl+0x41/0x58
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] [<c10030fb>] ? sysenter_do_call+0x12/0x28
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] Code: cb 89 7b 04 31 c0 5a 5b 5e 5f 5d c3 57 89 c7 56 53 8b 98 cc 02 00 00 eb 30 89 d8 31 f6 e8 0a ff ff ff eb 1a 6b c6 14 8b 53 04 46 <c7> 04 02 00 00 00 00 8b 57 04 03 43 04 8b 52 2c ff 52 20 0f b7
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] EIP: [<f83a9a44>] rt2x00queue_init_queues+0x1f/0x59 [rt2x00lib] SS:ESP 0068:f6553e30
Nov 7 10:22:28 DIM5000 kernel: [ 330.960003] CR2: 0000000000000000
Nov 7 10:22:28 DIM5000 kernel: [ 331.068692] ---[ end trace 1f66917b4293e3ad ]---
===
* dmesg extracted info
===
[ 7.192732] rt61pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.200022] phy0 -> rt61pci_init_eeprom: Error - Invalid RF chipset detected.
[ 7.200029] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 7.202233] rt61pci 0000:04:00.0: PCI INT A disabled
===
$dpkg -l | grep wireless
ii firmware-ralink 0.28+squeeze1 Binary firmware for Ralink wireless cards
ii rutilt 0.16-2 Configuration tool for rt2x00 wireless network cards
ii wireless-tools 30~pre9-5 Tools for manipulating Linux Wireless Extensions
===
$modinfo rt61pci
filename: /lib/modules/2.6.32-5-686/kernel/drivers/net/wireless/rt2x00/rt61pci.ko
license: GPL
firmware: rt2661.bin
firmware: rt2561s.bin
firmware: rt2561.bin
description: Ralink RT61 PCI & PCMCIA Wireless LAN driver.
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 58CB8FB9B8C50DC7068D2D6
alias: pci:v00001814d00000401sv*sd*bc*sc*i*
alias: pci:v00001814d00000302sv*sd*bc*sc*i*
alias: pci:v00001814d00000301sv*sd*bc*sc*i*
depends: rt2x00lib,rt2x00pci,eeprom_93cx6,crc-itu-t
vermagic: 2.6.32-5-686 SMP mod_unload modversions 686
parm: nohwcryptisable hardware encryption. (bool)
===
** Loaded modules:
$lsmod | grep rt
rt61pci 15716 0
crc_itu_t 1035 1 rt61pci
rt2x00pci 3773 1 rt61pci
rt2x00lib 19101 2 rt61pci,rt2x00pci
led_class 1757 1 rt2x00lib
mac80211 123586 2 rt2x00pci,rt2x00lib
cfg80211 87637 2 rt2x00lib,mac80211
parport_pc 15799 1
eeprom_93cx6 963 1 rt61pci
===
$modinfo rt2x00lib
filename: /lib/modules/2.6.32-5-686/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
license: GPL
description: rt2x00 library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 5CBB54687AFA7C313039AE6
depends: mac80211,led-class,cfg80211
vermagic: 2.6.32-5-686 SMP mod_unload modversions 686
===

** Model information
not available


** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:11:43:16:b7:1d brd ff:ff:ff:ff:ff:ff
inet 192.168.0.15/24 brd 192.168.0.255 scope global eth0
inet6 2a01:e35:2e70:c090:211:43ff:fe16:b71d/64 scope global dynamic
valid_lft 86034sec preferred_lft 86034sec
inet6 fe80::211:43ff:fe16:b71d/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 86:63:98:9d:24:c4 brd ff:ff:ff:ff:ff:ff
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 9a:ae:98:b3:40:5e brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 10128 88 0 0 0 0 0 0 10128 88 0 0 0 0 0 0
eth0: 987232 2140 0 0 0 0 0 79 222814 1914 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

*** Protocol statistics:
Ip:
1392 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
1390 incoming packets delivered
1500 requests sent out
16 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
63 active connections openings
4 passive connection openings
0 failed connection attempts
8 connection resets received
2 connections established
1009 segments received
1075 segments send out
49 segments retransmited
0 bad segments received.
22 resets sent
Udp:
760 packets received
0 packets to unknown port received.
0 packet receive errors
759 packets sent
UdpLite:
TcpExt:
27 TCP sockets finished time wait in fast timer
45 delayed acks sent
7 packets directly queued to recvmsg prequeue.
222 bytes directly in process context from backlog
2423 bytes directly received in process context from prequeue
560 packet headers predicted
18 packets header predicted and directly queued to user
122 acknowledgments not containing data payload received
86 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
7 other TCP timeouts
3 connections reset due to unexpected data
8 connections reset due to early user close
6 connections aborted due to timeout
IpExt:
InMcastPkts: 31
OutMcastPkts: 33
InBcastPkts: 13
InOctets: 554481
OutOctets: 136570
InMcastOctets: 5786
OutMcastOctets: 5819
InBcastOctets: 2123

** PCI devices:
$sudo lspci -nnvv
====
00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
Subsystem: Dell Device [1028:0199]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=09 <?>
Kernel driver in use: agpgart-intel

00:01.0 PCI bridge [0604]: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port [8086:2581] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dfd00000-dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4159
Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #7680, PowerLimit 75.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans+
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid-
Addr: 0000000000000000
Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at e898 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation 82915G Integrated Graphics Controller [8086:2782] (rev 04)
Subsystem: Dell Device [1028:0199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: dfc00000-dfcfffff
Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
t PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #2, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4161
Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8001
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: dfb00000-dfbfffff
Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #3, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4169
Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8001
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0199]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0199]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0199]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0199]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at ff20 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0199]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: df100000-dfafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]

00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
Subsystem: Dell Device [1028:0199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at ec00 [size=256]
Region 1: I/O ports at e8c0 [size=64]
Region 2: Memory at dfebfe00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at dfebfd00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Intel ICH

00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:0199]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix

00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device [1028:0199]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fea0 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
Subsystem: Dell Device [1028:0199]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e8a0 [size=32]
Kernel driver in use: i801_smbus

04:00.0 Ethernet controller [0200]: RaLink RT2561/RT61 rev B 802.11g [1814:0302]
Subsystem: D-Link System Inc AirPlus G DWL-G510 Wireless Network Adapter (Rev.C) [1186:3c09]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df1f0000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

04:02.0 Modem [0703]: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI [8086:1080] (rev 04) (prog-if 00 [Generic])
Subsystem: Dell Device [1028:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at df9fd000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at dc00 [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial

04:03.0 Ethernet controller [0200]: Broadcom Corporation BCM4401 100Base-T [14e4:4401] (rev 01)
Subsystem: Dell Device [1028:0199]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 19
Region 0: Memory at df9fe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at dfa00000 [disabled] [size=16K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: b44

** USB devices:
Bus 005 Device 002: ID 08bb:2704 Texas Instruments Japan
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 413c:5008 Dell Computer Corp.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-38 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111108214848.2403.19962.reportbug@DIM5000">http://lists.debian.org/20111108214848.2403.19962.reportbug@DIM5000
 
Old 11-09-2011, 04:22 AM
Ben Hutchings
 
Default Bug#648088: rt2x00lib: Kernel Oops rt2x00queue_init_queues of Linux 2.6.32-5-686 Debian 6.0.3

On Tue, 2011-11-08 at 22:48 +0100, Michel Normand wrote:
> Package: linux-2.6
> Version: 2.6.32-38
> Severity: normal
> File: rt2x00lib
>
> Kernel Oops if I am trying to use the wireless D-link pci card.
> I am removing manually the packages firmware-ralink to avoid the card
> to be initialized and generate the related Oops.

I'm not sure I understand you. Does the 'oops' occur when the firmware
is installed, or when the firmware is not installed?

[...]
> [ 7.192732] rt61pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 7.200022] phy0 -> rt61pci_init_eeprom: Error - Invalid RF chipset detected.
> [ 7.200029] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
> [ 7.202233] rt61pci 0000:04:00.0: PCI INT A disabled
[...]

In what case do these messages appear?

Ben.

--
Ben Hutchings
You can't have everything. Where would you put it?
 
Old 11-09-2011, 07:45 AM
Michel Normand
 
Default Bug#648088: rt2x00lib: Kernel Oops rt2x00queue_init_queues of Linux 2.6.32-5-686 Debian 6.0.3

Le mercredi 09 novembre 2011 à 05:22 +0000, Ben Hutchings a écrit :
> [...]
> I'm not sure I understand you. Does the 'oops' occur when the firmware
> is installed, or when the firmware is not installed?
>
> [...]
> > [ 7.192732] rt61pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > [ 7.200022] phy0 -> rt61pci_init_eeprom: Error - Invalid RF chipset detected.
> > [ 7.200029] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
> > [ 7.202233] rt61pci 0000:04:00.0: PCI INT A disabled
> [...]
>
> In what case do these messages appear?
>

The above traces and the Oops are reported when the firmware-ralink
package is installed on my machine.

---
Michel




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 1320828340.2149.5.camel@DIM5000">http://lists.debian.org/1320828340.2149.5.camel@DIM5000
 

Thread Tools




All times are GMT. The time now is 03:11 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org