FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 11-08-2011, 05:16 PM
Andres Cimmarusti
 
Default Bug#641749: bug 641749 update

Hi,

I've been successfully using a "pristine" 3.0.x kernel on the same
laptop atop Debian Squeeze (using the firmware-atheros packages from
backports and/or testing). I have no problems loading the AR3011
bluetooth module firmware and system restarts appropriately.

I started doing this since 3.0.6. It also works with 3.0.7 and the latest 3.0.8.

As a test, I created a Debian Live image on a USB stick with Debian
testing (and the latest kernel from Sid which is like ~3.0.7). I also
included the firmware-atheros and firmware-linux* packages. The system
boots fine, but it fails to load the atheros firmware!

I guess the problem does not reside in the kernel image package, nor
in the firmware(?!). I'm puzzled by this. What other packages contain
tools which are responsible for the loading of firmware?

To further confirm the problem, the newest Ubuntu (Live CD) 11.10 or
Xubuntu also fail to load the firmware. This releases uses kernel
3.0.x.

I hope this helps in narrowing down the culprit.

Andres



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: CAH=dYrEazwcm8pnDn0=HMpR3jQPMNC95p1yS0guvFX4uVpnGP w@mail.gmail.com">http://lists.debian.org/CAH=dYrEazwcm8pnDn0=HMpR3jQPMNC95p1yS0guvFX4uVpnGP w@mail.gmail.com
 
Old 11-09-2011, 01:13 AM
Ben Hutchings
 
Default Bug#641749: bug 641749 update

On Tue, Nov 08, 2011 at 01:16:31PM -0500, Andres Cimmarusti wrote:
> Hi,
>
> I've been successfully using a "pristine" 3.0.x kernel on the same
> laptop atop Debian Squeeze (using the firmware-atheros packages from
> backports and/or testing). I have no problems loading the AR3011
> bluetooth module firmware and system restarts appropriately.
>
> I started doing this since 3.0.6. It also works with 3.0.7 and the latest 3.0.8.
>
> As a test, I created a Debian Live image on a USB stick with Debian
> testing (and the latest kernel from Sid which is like ~3.0.7). I also
> included the firmware-atheros and firmware-linux* packages. The system
> boots fine, but it fails to load the atheros firmware!

Send the log messages.

> I guess the problem does not reside in the kernel image package, nor
> in the firmware(?!). I'm puzzled by this. What other packages contain
> tools which are responsible for the loading of firmware?

udev is responsible for loading firmware as requested by the kernel.

> To further confirm the problem, the newest Ubuntu (Live CD) 11.10 or
> Xubuntu also fail to load the firmware. This releases uses kernel
> 3.0.x.
>
> I hope this helps in narrowing down the culprit.
>
> Andres
>

--
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
- Albert Camus



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111109021346.GL3366@decadent.org.uk">http://lists.debian.org/20111109021346.GL3366@decadent.org.uk
 
Old 11-09-2011, 04:45 AM
Andres Cimmarusti
 
Default Bug#641749: bug 641749 update

> Send the log messages.

Here they go. Let me know if I need to send other logs, but this one
clearly shows the error loading the firmware while using testing and
no error at all using stable and basically the same kernel version and
firmware.

I also should say the error message is also displayed during boot. It
shows up shortly after the "standard" message saying udev is loading
all devices.

Andres
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-2-amd64 (Debian 3.0.0-6) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-9) ) #1 SMP Wed Nov 2 04:50:05 UTC 2011
[ 0.000000] Command line: initrd=/live/initrd.img boot=live config quiet BOOT_IMAGE=/live/vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b3594000 (usable)
[ 0.000000] BIOS-e820: 00000000b3594000 - 00000000b3596000 (reserved)
[ 0.000000] BIOS-e820: 00000000b3596000 - 00000000b35de000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b35de000 - 00000000b35e8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b35e8000 - 00000000b35eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b35eb000 - 00000000b361a000 (reserved)
[ 0.000000] BIOS-e820: 00000000b361a000 - 00000000b361c000 (usable)
[ 0.000000] BIOS-e820: 00000000b361c000 - 00000000b3626000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b3626000 - 00000000b3647000 (reserved)
[ 0.000000] BIOS-e820: 00000000b3647000 - 00000000b368a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b368a000 - 00000000b3800000 (usable)
[ 0.000000] BIOS-e820: 00000000b7e00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M., BIOS Spring Peak 01/25/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0B4000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 138000000 mask FF8000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b4000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb3800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcd20] fcd20
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b3800000
[ 0.000000] 0000000000 - 00b3800000 page 2M
[ 0.000000] kernel direct mapping tables up to b3800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ b37fa000-b3800000
[ 0.000000] RAMDISK: 7f4b0000 - 7ffff000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 ALASKA)
[ 0.000000] ACPI: XSDT 00000000b35de080 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000b35e6e90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xB361DF40/0x00000000B361DF80, using 32 (20110413/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000b35de168 08D23 (v02 ALASKA A M I 00000018 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000b361df40 00040
[ 0.000000] ACPI: APIC 00000000b35e6f88 00072 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000b35e7000 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000b35e7108 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000b35e7148 00038 (v01 ALASKA A M I 01072009 AMI. 00000003)
[ 0.000000] ACPI: ASF! 00000000b35e7180 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880133a00000-ffff8801371fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000b3594
[ 0.000000] 0: 0x000b361a -> 0x000b361c
[ 0.000000] 0: 0x000b368a -> 0x000b3800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 964246
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 716612 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b3594000 - 00000000b3596000
[ 0.000000] PM: Registered nosave memory: 00000000b3596000 - 00000000b35de000
[ 0.000000] PM: Registered nosave memory: 00000000b35de000 - 00000000b35e8000
[ 0.000000] PM: Registered nosave memory: 00000000b35e8000 - 00000000b35eb000
[ 0.000000] PM: Registered nosave memory: 00000000b35eb000 - 00000000b361a000
[ 0.000000] PM: Registered nosave memory: 00000000b361c000 - 00000000b3626000
[ 0.000000] PM: Registered nosave memory: 00000000b3626000 - 00000000b3647000
[ 0.000000] PM: Registered nosave memory: 00000000b3647000 - 00000000b368a000
[ 0.000000] PM: Registered nosave memory: 00000000b3800000 - 00000000b7e00000
[ 0.000000] PM: Registered nosave memory: 00000000b7e00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s78912 r8192 d23488 u524288
[ 0.000000] pcpu-alloc: s78912 r8192 d23488 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 946769
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/live/initrd.img boot=live config quiet BOOT_IMAGE=/live/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3713108k/5111808k available (3326k kernel code, 1254824k absent, 143876k reserved, 3369k data, 564k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 1330.179 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2660.35 BogoMIPS (lpj=5320716)
[ 0.000012] pid_max: default: 32768 minimum: 301
[ 0.000109] Security Framework initialized
[ 0.000116] SELinux: Disabled at boot.
[ 0.000679] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002605] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003397] Mount-cache hash table entries: 256
[ 0.003588] Initializing cgroup subsys cpuacct
[ 0.003596] Initializing cgroup subsys memory
[ 0.003613] Initializing cgroup subsys devices
[ 0.003617] Initializing cgroup subsys freezer
[ 0.003622] Initializing cgroup subsys net_cls
[ 0.003625] Initializing cgroup subsys blkio
[ 0.003680] CPU: Physical Processor ID: 0
[ 0.003682] CPU: Processor Core ID: 0
[ 0.003691] mce: CPU supports 9 MCE banks
[ 0.003708] CPU0: Thermal monitoring enabled (TM1)
[ 0.003720] using mwait in idle threads.
[ 0.004334] ACPI: Core revision 20110413
[ 0.013948] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053594] CPU0: Intel(R) Core(TM) i3 CPU U 380 @ 1.33GHz stepping 05
[ 0.158186] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.158198] ... version: 3
[ 0.158201] ... bit width: 48
[ 0.158203] ... generic registers: 4
[ 0.158206] ... value mask: 0000ffffffffffff
[ 0.158209] ... max period: 000000007fffffff
[ 0.158211] ... fixed-purpose events: 3
[ 0.158214] ... event mask: 000000070000000f
[ 0.158479] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.158676] Booting Node 0, Processors #1
[ 0.158680] smpboot cpu 1: start_ip = 95000
[ 0.266180] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.266392] #2
[ 0.266395] smpboot cpu 2: start_ip = 95000
[ 0.374126] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.374355] #3 Ok.
[ 0.374357] smpboot cpu 3: start_ip = 95000
[ 0.481953] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.482016] Brought up 4 CPUs
[ 0.482020] Total of 4 processors activated (10641.19 BogoMIPS).
[ 0.485000] devtmpfs: initialized
[ 0.491122] PM: Registering ACPI NVS region at b3596000 (294912 bytes)
[ 0.491151] PM: Registering ACPI NVS region at b35e8000 (12288 bytes)
[ 0.491155] PM: Registering ACPI NVS region at b361c000 (40960 bytes)
[ 0.491161] PM: Registering ACPI NVS region at b3647000 (274432 bytes)
[ 0.491413] print_constraints: dummy:
[ 0.491511] NET: Registered protocol family 16
[ 0.491664] ACPI: bus type pci registered
[ 0.491772] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.491778] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.550733] PCI: Using configuration type 1 for base access
[ 0.551657] bio: create slab <bio-0> at 0
[ 0.554157] ACPI: EC: Look up EC in DSDT
[ 0.556476] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.564811] ACPI: SSDT 00000000b361cc18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.565546] ACPI: Dynamic OEM Table Load:
[ 0.565551] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.565603] ACPI Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20110413/tbutils-314)
[ 0.565611] ACPI: SSDT 00000000b361de18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.566190] ACPI: Dynamic OEM Table Load:
[ 0.566194] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.569227] ACPI: Interpreter enabled
[ 0.569234] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.569306] ACPI: Using IOAPIC for interrupt routing
[ 0.569798] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.675208] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.675544] ACPI: No dock devices found.
[ 0.675548] HEST: Table not found.
[ 0.675552] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.675837] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.676054] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.676059] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.676063] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.676067] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 0.676087] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.676117] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.676148] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.676166] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.676177] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.676185] pci 0000:00:02.0: reg 20: [io 0xf080-0xf087]
[ 0.676279] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.676317] pci 0000:00:16.0: reg 10: [mem 0xfe509000-0xfe50900f 64bit]
[ 0.676419] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.676427] pci 0000:00:16.0: PME# disabled
[ 0.676477] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.676509] pci 0000:00:1a.0: reg 10: [mem 0xfe508000-0xfe5083ff]
[ 0.676618] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.676625] pci 0000:00:1a.0: PME# disabled
[ 0.676664] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.676691] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit]
[ 0.676787] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.676793] pci 0000:00:1b.0: PME# disabled
[ 0.676827] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.676926] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.676932] pci 0000:00:1c.0: PME# disabled
[ 0.676974] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.677071] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.677078] pci 0000:00:1c.4: PME# disabled
[ 0.677126] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.677159] pci 0000:00:1d.0: reg 10: [mem 0xfe507000-0xfe5073ff]
[ 0.677268] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.677275] pci 0000:00:1d.0: PME# disabled
[ 0.677308] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.677403] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 0.677553] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 0.677586] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
[ 0.677601] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
[ 0.677616] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
[ 0.677630] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
[ 0.677644] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 0.677659] pci 0000:00:1f.2: reg 24: [mem 0xfe506000-0xfe5067ff]
[ 0.677729] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.677736] pci 0000:00:1f.2: PME# disabled
[ 0.677772] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.677800] pci 0000:00:1f.3: reg 10: [mem 0xfe505000-0xfe5050ff 64bit]
[ 0.677836] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.677897] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.677933] pci 0000:00:1f.6: reg 10: [mem 0xfe504000-0xfe504fff 64bit]
[ 0.678709] pci 0000:01:00.0: [10ec:8172] type 0 class 0x000280
[ 0.679260] pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.679647] pci 0000:01:00.0: reg 14: [mem 0xfe400000-0xfe403fff]
[ 0.682725] pci 0000:01:00.0: supports D1 D2
[ 0.682728] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.682841] pci 0000:01:00.0: PME# disabled
[ 0.684047] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.684054] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.684060] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.684071] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.684220] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.684292] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.684417] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.684495] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.684716] pci 0000:02:00.0: supports D1 D2
[ 0.684719] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.684736] pci 0000:02:00.0: PME# disabled
[ 0.684922] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.684929] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.684935] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.684945] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.685039] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.685046] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.685053] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.685062] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.685067] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.685072] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.685076] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.685081] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.685110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.685570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.685819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.685902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.686177] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.686503] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.696858] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.696950] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.697036] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.697122] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.697208] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.697295] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.697385] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.697471] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.697635] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.697649] vgaarb: loaded
[ 0.697651] vgaarb: bridge control possible 0000:00:02.0
[ 0.697723] PCI: Using ACPI for IRQ routing
[ 0.709365] PCI: Discovered peer bus ff
[ 0.709424] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.709460] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.709493] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.709522] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.709551] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.709580] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.709877] PCI: pci_cache_line_size set to 64 bytes
[ 0.710080] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 0.710084] reserve RAM buffer: 00000000b3594000 - 00000000b3ffffff
[ 0.710092] reserve RAM buffer: 00000000b361c000 - 00000000b3ffffff
[ 0.710097] reserve RAM buffer: 00000000b3800000 - 00000000b3ffffff
[ 0.710278] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.710287] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.712315] Switching to clocksource hpet
[ 0.713587] Switched to NOHz mode on CPU #0
[ 0.713677] Switched to NOHz mode on CPU #1
[ 0.713693] Switched to NOHz mode on CPU #3
[ 0.713742] Switched to NOHz mode on CPU #2
[ 0.714741] pnp: PnP ACPI init
[ 0.714762] ACPI: bus type pnp registered
[ 0.714868] pnp 00:00: [bus 00-ff]
[ 0.714873] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.714877] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.714880] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.714884] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.714888] pnp 00:00: [mem 0x00000000 window]
[ 0.714892] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 0.714972] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.715070] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.715074] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.715077] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.715081] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.715084] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.715154] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.715159] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.715164] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.715169] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.715174] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.715179] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.715366] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.715370] pnp 00:02: [io 0x0a00-0x0a1f]
[ 0.715374] pnp 00:02: [io 0x0a20-0x0a3f]
[ 0.715440] system 00:02: [io 0x0a00-0x0a1f] has been reserved
[ 0.715445] system 00:02: [io 0x0a20-0x0a3f] has been reserved
[ 0.715449] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.715496] pnp 00:03: [io 0x0060]
[ 0.715499] pnp 00:03: [io 0x0064]
[ 0.715514] pnp 00:03: [irq 1]
[ 0.715566] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.715639] pnp 00:04: [irq 12]
[ 0.715690] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.715712] pnp 00:05: [dma 4]
[ 0.715715] pnp 00:05: [io 0x0000-0x000f]
[ 0.715719] pnp 00:05: [io 0x0081-0x0083]
[ 0.715722] pnp 00:05: [io 0x0087]
[ 0.715725] pnp 00:05: [io 0x0089-0x008b]
[ 0.715728] pnp 00:05: [io 0x008f]
[ 0.715732] pnp 00:05: [io 0x00c0-0x00df]
[ 0.715772] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.715791] pnp 00:06: [io 0x0070-0x0071]
[ 0.715799] pnp 00:06: [irq 8]
[ 0.715838] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.715854] pnp 00:07: [io 0x0061]
[ 0.715896] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.715929] pnp 00:08: [io 0x0010-0x001f]
[ 0.715933] pnp 00:08: [io 0x0022-0x003f]
[ 0.715936] pnp 00:08: [io 0x0044-0x005f]
[ 0.715939] pnp 00:08: [io 0x0072-0x007f]
[ 0.715942] pnp 00:08: [io 0x0080]
[ 0.715945] pnp 00:08: [io 0x0084-0x0086]
[ 0.715948] pnp 00:08: [io 0x0088]
[ 0.715951] pnp 00:08: [io 0x008c-0x008e]
[ 0.715954] pnp 00:08: [io 0x0090-0x009f]
[ 0.715957] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.715960] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.715963] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.716042] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.716048] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.716065] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.716074] pnp 00:09: [irq 13]
[ 0.716118] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.717259] pnp 00:0a: [io 0x0400-0x047f]
[ 0.717263] pnp 00:0a: [io 0x1180-0x119f]
[ 0.717267] pnp 00:0a: [io 0x0500-0x057f]
[ 0.717271] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.717274] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[ 0.717278] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[ 0.717281] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.717373] system 00:0a: [io 0x0400-0x047f] has been reserved
[ 0.717378] system 00:0a: [io 0x1180-0x119f] has been reserved
[ 0.717383] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.717388] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.717394] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.717399] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.717404] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.717409] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.717628] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.717694] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.757282] pnp: PnP ACPI: found 12 devices
[ 0.757285] ACPI: ACPI bus type pnp unregistered
[ 0.764501] PCI: max bus depth: 1 pci_try_num: 2
[ 0.764546] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.764552] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.764561] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.764568] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.764578] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.764583] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.764592] pci 0000:00:1c.4: bridge window [mem disabled]
[ 0.764598] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.764609] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.764612] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.764620] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.764627] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.764660] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.764669] pci 0000:00:1c.0: setting latency timer to 64
[ 0.764680] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.764687] pci 0000:00:1c.4: setting latency timer to 64
[ 0.764698] pci 0000:00:1e.0: setting latency timer to 64
[ 0.764705] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.764709] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.764712] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.764716] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.764720] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.764723] pci_bus 0000:01: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.764727] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.764731] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.764735] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.764739] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.764742] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.764746] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.764750] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff]
[ 0.764754] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.764890] NET: Registered protocol family 2
[ 0.765140] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.766816] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.770043] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.770436] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.770440] TCP reno registered
[ 0.770457] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.770495] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.770748] NET: Registered protocol family 1
[ 0.770775] pci 0000:00:02.0: Boot video device
[ 1.024111] PCI: CLS 64 bytes, default 64
[ 1.024186] Unpacking initramfs...
[ 1.474999] Freeing initrd memory: 11580k freed
[ 1.478699] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.478707] Placing 64MB software IO TLB between ffff8800af594000 - ffff8800b3594000
[ 1.478711] software IO TLB at phys 0xaf594000 - 0xb3594000
[ 1.479698] audit: initializing netlink socket (disabled)
[ 1.479722] type=2000 audit(1320816954.324:1): initialized
[ 1.513845] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.534839] VFS: Disk quotas dquot_6.5.2
[ 1.534898] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.535026] msgmni has been set to 7274
[ 1.535306] alg: No test for stdrng (krng)
[ 1.535364] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.535371] io scheduler noop registered
[ 1.535373] io scheduler deadline registered
[ 1.535437] io scheduler cfq registered (default)
[ 1.535603] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.535677] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.535800] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.535865] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 1.536021] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.536026] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.536033] pcie_pme 0000:00:1c.0cie01: service driver pcie_pme loaded
[ 1.536065] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.536069] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.536076] pcie_pme 0000:00:1c.4cie01: service driver pcie_pme loaded
[ 1.536225] ERST: Table is not found!
[ 1.536332] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.703857] Linux agpgart interface v0.103
[ 1.703983] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.704158] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.705247] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.705463] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.705668] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.714376] i8042: Detected active multiplexing controller, rev 1.1
[ 1.717600] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.717614] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.717627] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.717632] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.717637] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.717920] mousedev: PS/2 mouse device common for all mice
[ 1.718785] rtc_cmos 00:06: RTC can wake from S4
[ 1.718925] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.718963] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.718978] cpuidle: using governor ladder
[ 1.718981] cpuidle: using governor menu
[ 1.719367] TCP cubic registered
[ 1.719487] NET: Registered protocol family 10
[ 1.720305] Mobile IPv6
[ 1.720309] NET: Registered protocol family 17
[ 1.720317] Registering the dns_resolver key type
[ 1.720480] PM: Hibernation image not present or could not be loaded.
[ 1.720513] registered taskstats version 1
[ 1.731974] rtc_cmos 00:06: setting system clock to 2011-11-09 05:35:55 UTC (1320816955)
[ 1.732082] Initializing network drop monitor service
[ 1.734320] Freeing unused kernel memory: 564k freed
[ 1.734432] Write protecting the kernel read-only data: 6144k
[ 1.734700] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.740084] Freeing unused kernel memory: 752k freed
[ 1.745133] Freeing unused kernel memory: 720k freed
[ 1.762784] udevd[57]: starting version 172
[ 1.805190] usbcore: registered new interface driver usbfs
[ 1.805242] usbcore: registered new interface driver hub
[ 1.805681] usbcore: registered new device driver usb
[ 1.806447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.806521] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.806561] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.806569] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.806618] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.806677] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.810687] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.810727] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe508000
[ 1.823444] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.823502] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.823508] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.823513] usb usb1: Product: EHCI Host Controller
[ 1.823518] usb usb1: Manufacturer: Linux 3.0.0-2-amd64 ehci_hcd
[ 1.823522] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.823766] hub 1-0:1.0: USB hub found
[ 1.823777] hub 1-0:1.0: 2 ports detected
[ 1.823960] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.824018] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.824025] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.824044] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.824103] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.828092] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.828129] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe507000
[ 1.837595] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.837639] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.837761] r8169 0000:02:00.0: setting latency timer to 64
[ 1.837995] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.838939] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc90000650000, 1c:6f:65:90:94:af, XID 0c200000 IRQ 42
[ 1.843114] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.843167] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.843173] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.843179] usb usb2: Product: EHCI Host Controller
[ 1.843184] usb usb2: Manufacturer: Linux 3.0.0-2-amd64 ehci_hcd
[ 1.843189] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.843452] hub 2-0:1.0: USB hub found
[ 1.843464] hub 2-0:1.0: 2 ports detected
[ 1.852567] SCSI subsystem initialized
[ 1.857352] libata version 3.00 loaded.
[ 1.858547] ahci 0000:00:1f.2: version 3.0
[ 1.858592] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.858682] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.858769] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[ 1.858776] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 1.858784] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.863991] scsi0 : ahci
[ 1.864323] scsi1 : ahci
[ 1.864436] scsi2 : ahci
[ 1.864548] scsi3 : ahci
[ 1.864660] scsi4 : ahci
[ 1.864983] ata1: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506100 irq 43
[ 1.864989] ata2: DUMMY
[ 1.864992] ata3: DUMMY
[ 1.864995] ata4: DUMMY
[ 1.865000] ata5: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506300 irq 43
[ 2.134790] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.182743] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.182800] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.183123] ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10302, max UDMA/133
[ 2.183128] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.183498] ata1.00: configured for UDMA/133
[ 2.183685] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5
[ 2.190278] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.190377] sd 0:0:0:0: [sda] Write Protect is off
[ 2.190381] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.190411] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.191258] sda: sda1 sda2 < sda5 >
[ 2.191683] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.193895] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.267060] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.267071] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.267357] hub 1-1:1.0: USB hub found
[ 2.267416] hub 1-1:1.0: 6 ports detected
[ 2.378534] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.474446] Refined TSC clocksource calibration: 1330.151 MHz.
[ 2.474456] Switching to clocksource tsc
[ 2.481852] Uniform Multi-Platform E-IDE driver
[ 2.482384] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 2.482406] Probing IDE interface ide0...
[ 2.510792] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.510802] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.511092] hub 2-1:1.0: USB hub found
[ 2.511151] hub 2-1:1.0: 8 ports detected
[ 2.582476] usb 1-1.3: new full speed USB device number 3 using ehci_hcd
[ 2.674868] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3000
[ 2.674878] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.782260] usb 2-1.2: new high speed USB device number 3 using ehci_hcd
[ 2.876767] usb 2-1.2: New USB device found, idVendor=13fe, idProduct=1d00
[ 2.876776] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.876784] usb 2-1.2: Product: DataTraveler 2.0
[ 2.876790] usb 2-1.2: Manufacturer: Kingston
[ 2.876796] usb 2-1.2: SerialNumber: 5B721987943C
[ 2.880585] usbcore: registered new interface driver uas
[ 2.881790] Initializing USB Mass Storage driver...
[ 2.881918] scsi5 : usb-storage 2-1.2:1.0
[ 2.882075] usbcore: registered new interface driver usb-storage
[ 2.882079] USB Mass Storage support registered.
[ 2.946080] usb 2-1.4: new low speed USB device number 4 using ehci_hcd
[ 3.041212] usb 2-1.4: New USB device found, idVendor=0461, idProduct=4d0f
[ 3.041223] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.041231] usb 2-1.4: Product: USB Optical Mouse
[ 3.041879] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.041905] Probing IDE interface ide1...
[ 3.048803] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input1
[ 3.048912] generic-usb 0003:0461:4D0F.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.4/input0
[ 3.048935] usbcore: registered new interface driver usbhid
[ 3.048938] usbhid: USB HID core driver
[ 3.113882] usb 2-1.5: new high speed USB device number 5 using ehci_hcd
[ 3.601270] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.666776] usb 2-1.5: New USB device found, idVendor=174f, idProduct=1420
[ 3.666784] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.666788] usb 2-1.5: Product: USB Camera Device
[ 3.666792] usb 2-1.5: Manufacturer: Syntek
[ 3.666797] usb 2-1.5: SerialNumber: STK00001
[ 3.703595] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.881854] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 4.061440] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 4.061986] sd 5:0:0:0: [sdb] 8060928 512-byte logical blocks: (4.12 GB/3.84 GiB)
[ 4.062473] sd 5:0:0:0: [sdb] Write Protect is off
[ 4.062477] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4.062970] sd 5:0:0:0: [sdb] No Caching mode page present
[ 4.063038] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4.065989] sd 5:0:0:0: [sdb] No Caching mode page present
[ 4.066066] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4.066886] sdb: sdb1
[ 4.068975] sd 5:0:0:0: [sdb] No Caching mode page present
[ 4.069049] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4.069124] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 4.870734] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 4.873484] ISO 9660 Extensions: RRIP_1991A
[ 4.883561] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.885147] aufs 3.0-20111031
[ 4.900947] loop: module loaded
[ 4.963624] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 12.600146] udevd[890]: starting version 172
[ 12.710451] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 12.710466] ACPI: Power Button [PWRB]
[ 12.710587] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 12.711692] ACPI: Lid Switch [LID0]
[ 12.711838] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 12.711848] ACPI: Power Button [PWRF]
[ 12.712344] ACPI: acpi_idle registered with cpuidle
[ 12.715482] Monitor-Mwait will be used to enter C-2 state
[ 12.715546] Monitor-Mwait will be used to enter C-3 state
[ 12.750810] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 12.804441] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 11, expected 14)
[ 12.804476] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 12.804528] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 12.804734] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 12.817730] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 12.871214] wmi: Mapper loaded
[ 12.953296] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 12.983371] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.022151] cfg80211: Calling CRDA to update world regulatory domain
[ 13.119022] ACPI: Battery Slot [BAT1] (battery present)
[ 13.151012] ACPI: AC Adapter [AC] (on-line)
[ 13.251561] asus_wmi: Asus Management GUID not found
[ 13.367592] [drm] Initialized drm 1.1.0 20060810
[ 13.506518] Linux media interface: v0.10
[ 13.519978] Linux video capture interface: v2.00
[ 13.526199] uvcvideo: Found UVC 1.00 device USB Camera Device (174f:1420)
[ 13.621384] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.621394] i915 0000:00:02.0: setting latency timer to 64
[ 13.622505] input: USB Camera Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input6
[ 13.622635] usbcore: registered new interface driver uvcvideo
[ 13.622640] USB Video Class driver (v1.1.0)
[ 13.629498] rtl8192se 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.629616] rtl8192se 0000:01:00.0: setting latency timer to 64
[ 13.667188] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[ 13.667192] Loading firmware rtlwifi/rtl8192sefw.bin
[ 13.725475] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 13.725481] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 13.726188] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 13.726197] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.726200] [drm] Driver supports precise vblank timestamp query.
[ 13.726271] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
[ 13.779761] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 13.906528] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0
[ 13.951896] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 13.994733] fbcon: inteldrmfb (fb0) is primary device
[ 14.086033] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mtp-probe rqt 128 rq 6 len 1024 ret -110
[ 14.115890] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 14.168494] Console: switching to colour frame buffer device 170x48
[ 14.173520] fb0: inteldrmfb frame buffer device
[ 14.173523] drm: registered panic notifier
[ 14.187917] acpi device:3e: registered as cooling_device4
[ 14.188283] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 14.188368] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.188452] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.188617] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.188705] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 14.188744] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.245213] hda_codec: ALC269: SKU not ready 0x598301f0
[ 14.245908] hda_codec: ALC269VB: BIOS auto-probing.
[ 14.246940] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 14.258911] HDMI status: Pin=4 Presence_Detect=0 ELD_Valid=0
[ 14.259457] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.259926] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0
[ 14.262503] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.262607] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.262704] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.262802] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 17.997755] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 19.140628] ath3k_load_firmware: Can't change to loading configuration err
[ 19.140758] ath3k: probe of 1-1.3:1.0 failed with error -110
[ 19.140862] usbcore: registered new interface driver ath3k
[ 19.905431] fuse init (API version 7.16)
[ 21.646271] Bluetooth: Core ver 2.16
[ 21.646309] NET: Registered protocol family 31
[ 21.646315] Bluetooth: HCI device and connection manager initialized
[ 21.646320] Bluetooth: HCI socket layer initialized
[ 21.646324] Bluetooth: L2CAP socket layer initialized
[ 21.646406] Bluetooth: SCO socket layer initialized
[ 21.684614] Bluetooth: RFCOMM TTY layer initialized
[ 21.684624] Bluetooth: RFCOMM socket layer initialized
[ 21.684629] Bluetooth: RFCOMM ver 1.11
[ 21.709312] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.709316] Bluetooth: BNEP filters: protocol multicast
[ 22.430856] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.580455] r8169 0000:02:00.0: eth0: link down
[ 22.581095] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.749124] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 27.809690] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.8-desktop.1-amd64 (lab@phonon) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT Mon Nov 7 16:22:05 EST 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.8-desktop.1-amd64 root=UUID=d7e3e4b3-1ec1-4ab7-a2fd-c9b8cffc8fd3 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b3594000 (usable)
[ 0.000000] BIOS-e820: 00000000b3594000 - 00000000b3596000 (reserved)
[ 0.000000] BIOS-e820: 00000000b3596000 - 00000000b35de000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b35de000 - 00000000b35e8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b35e8000 - 00000000b35eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b35eb000 - 00000000b361a000 (reserved)
[ 0.000000] BIOS-e820: 00000000b361a000 - 00000000b361c000 (usable)
[ 0.000000] BIOS-e820: 00000000b361c000 - 00000000b3626000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b3626000 - 00000000b3647000 (reserved)
[ 0.000000] BIOS-e820: 00000000b3647000 - 00000000b368a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b368a000 - 00000000b3800000 (usable)
[ 0.000000] BIOS-e820: 00000000b7e00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M., BIOS Spring Peak 01/25/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0B4000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 138000000 mask FF8000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b4000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb3800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcd20] fcd20
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b3800000
[ 0.000000] 0000000000 - 00b3800000 page 2M
[ 0.000000] kernel direct mapping tables up to b3800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ b37fa000-b3800000
[ 0.000000] RAMDISK: 37567000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 ALASKA)
[ 0.000000] ACPI: XSDT 00000000b35de080 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000b35e6e90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xB361DF40/0x00000000B361DF80, using 32 (20110413/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000b35de168 08D23 (v02 ALASKA A M I 00000018 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000b361df40 00040
[ 0.000000] ACPI: APIC 00000000b35e6f88 00072 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000b35e7000 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000b35e7108 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000b35e7148 00038 (v01 ALASKA A M I 01072009 AMI. 00000003)
[ 0.000000] ACPI: ASF! 00000000b35e7180 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880133a00000-ffff8801371fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000b3594
[ 0.000000] 0: 0x000b361a -> 0x000b361c
[ 0.000000] 0: 0x000b368a -> 0x000b3800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 964246
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 716612 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b3594000 - 00000000b3596000
[ 0.000000] PM: Registered nosave memory: 00000000b3596000 - 00000000b35de000
[ 0.000000] PM: Registered nosave memory: 00000000b35de000 - 00000000b35e8000
[ 0.000000] PM: Registered nosave memory: 00000000b35e8000 - 00000000b35eb000
[ 0.000000] PM: Registered nosave memory: 00000000b35eb000 - 00000000b361a000
[ 0.000000] PM: Registered nosave memory: 00000000b361c000 - 00000000b3626000
[ 0.000000] PM: Registered nosave memory: 00000000b3626000 - 00000000b3647000
[ 0.000000] PM: Registered nosave memory: 00000000b3647000 - 00000000b368a000
[ 0.000000] PM: Registered nosave memory: 00000000b3800000 - 00000000b7e00000
[ 0.000000] PM: Registered nosave memory: 00000000b7e00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s79232 r8192 d23168 u524288
[ 0.000000] pcpu-alloc: s79232 r8192 d23168 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 946769
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.8-desktop.1-amd64 root=UUID=d7e3e4b3-1ec1-4ab7-a2fd-c9b8cffc8fd3 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3713852k/5111808k available (3371k kernel code, 1254824k absent, 143132k reserved, 3334k data, 592k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 1330.335 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2660.67 BogoMIPS (lpj=1330335)
[ 0.000011] pid_max: default: 32768 minimum: 301
[ 0.000136] Security Framework initialized
[ 0.000211] SELinux: Disabled at boot.
[ 0.000765] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002776] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003639] Mount-cache hash table entries: 256
[ 0.003851] Initializing cgroup subsys cpuacct
[ 0.003859] Initializing cgroup subsys memory
[ 0.003876] Initializing cgroup subsys devices
[ 0.003880] Initializing cgroup subsys freezer
[ 0.003884] Initializing cgroup subsys net_cls
[ 0.003888] Initializing cgroup subsys blkio
[ 0.003950] CPU: Physical Processor ID: 0
[ 0.003952] CPU: Processor Core ID: 0
[ 0.003960] mce: CPU supports 9 MCE banks
[ 0.003978] CPU0: Thermal monitoring enabled (TM1)
[ 0.003990] using mwait in idle threads.
[ 0.005454] ACPI: Core revision 20110413
[ 0.015388] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.025384] CPU0: Intel(R) Core(TM) i3 CPU U 380 @ 1.33GHz stepping 05
[ 0.127073] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.127084] ... version: 3
[ 0.127086] ... bit width: 48
[ 0.127089] ... generic registers: 4
[ 0.127091] ... value mask: 0000ffffffffffff
[ 0.127094] ... max period: 000000007fffffff
[ 0.127096] ... fixed-purpose events: 3
[ 0.127099] ... event mask: 000000070000000f
[ 0.133222] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.141099] Booting Node 0, Processors #1
[ 0.141108] smpboot cpu 1: start_ip = 95000
[ 0.232097] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.238012] #2
[ 0.238015] smpboot cpu 2: start_ip = 95000
[ 0.328998] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.334902] #3 Ok.
[ 0.334905] smpboot cpu 3: start_ip = 95000
[ 0.425902] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.427746] Brought up 4 CPUs
[ 0.427753] Total of 4 processors activated (10641.24 BogoMIPS).
[ 0.430443] devtmpfs: initialized
[ 0.437408] PM: Registering ACPI NVS region at b3596000 (294912 bytes)
[ 0.437435] PM: Registering ACPI NVS region at b35e8000 (12288 bytes)
[ 0.437439] PM: Registering ACPI NVS region at b361c000 (40960 bytes)
[ 0.437445] PM: Registering ACPI NVS region at b3647000 (274432 bytes)
[ 0.437715] print_constraints: dummy:
[ 0.437843] NET: Registered protocol family 16
[ 0.438010] ACPI: bus type pci registered
[ 0.438119] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.438124] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.508650] PCI: Using configuration type 1 for base access
[ 0.509655] bio: create slab <bio-0> at 0
[ 0.512986] ACPI: EC: Look up EC in DSDT
[ 0.516066] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.524630] ACPI: SSDT 00000000b361cc18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.525538] ACPI: Dynamic OEM Table Load:
[ 0.525543] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.525597] ACPI Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20110413/tbutils-314)
[ 0.525605] ACPI: SSDT 00000000b361de18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.526373] ACPI: Dynamic OEM Table Load:
[ 0.526378] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.529587] ACPI: Interpreter enabled
[ 0.529593] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.529674] ACPI: Using IOAPIC for interrupt routing
[ 0.530190] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.630340] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.630724] ACPI: No dock devices found.
[ 0.630728] HEST: Table not found.
[ 0.630733] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.631014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.631234] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.631238] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.631242] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.631247] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 0.631266] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.631297] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.631330] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.631349] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.631361] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.631370] pci 0000:00:02.0: reg 20: [io 0xf080-0xf087]
[ 0.631464] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.631508] pci 0000:00:16.0: reg 10: [mem 0xfe509000-0xfe50900f 64bit]
[ 0.631615] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.631624] pci 0000:00:16.0: PME# disabled
[ 0.631688] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.631723] pci 0000:00:1a.0: reg 10: [mem 0xfe508000-0xfe5083ff]
[ 0.631838] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.631846] pci 0000:00:1a.0: PME# disabled
[ 0.631887] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.631914] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit]
[ 0.632018] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.632025] pci 0000:00:1b.0: PME# disabled
[ 0.632059] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.632164] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.632170] pci 0000:00:1c.0: PME# disabled
[ 0.632214] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.632319] pci 0000:00:1c.4: PME# supported f
 

Thread Tools




All times are GMT. The time now is 09:32 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org