FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 10-08-2011, 04:04 PM
Андрей Аладьев
 
Default Bug#644736: network-manager fails to reconnect to wifi

Package: linux-2.6
Version: 2.6.39-3~bpo60+1
Severity: normal

*** Please type your report below this line ***

if wifi signal is very bad:
1) network-manager disconnects from wifi after 5 minutes.
2) If I try to reconnect to wifi - it fails to connect.
3) If I reboot computer - it connects properly.
Please take a look at
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/736171
Maybe it can help you to fix this bug.


-- Package-specific info:
** Version:
Linux version 2.6.39-bpo.2-amd64 (Debian 2.6.39-3~bpo60+1)
(norbert@tretkowski.de) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP
Tue Jul 26 10:35:23 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-bpo.2-amd64
root=UUID=ea13e98f-f082-4607-ac98-7f04b9b299a5 ro quiet

** Tainted: O (4096)
** Out-of-tree module has been loaded.

** Kernel log:
[ 1128.298318] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1128.368712] ath: Failed to stop TX DMA!
[ 1128.382362] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00006040
[ 1128.382367] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1128.525797] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1128.525806] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1128.669826] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1128.669835] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1128.813829] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1128.813838] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1128.834132] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1128.834138] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1209.855043] ath: Failed to stop TX DMA!
[ 1209.863680] ath: Failed to stop TX DMA!
[ 1209.877322] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00006040
[ 1209.877328] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1209.897479] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1209.897484] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1209.964755] ath: Failed to stop TX DMA!
[ 1209.978414] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1209.978420] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1210.048716] ath: Failed to stop TX DMA!
[ 1210.062376] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1210.062382] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1210.132747] ath: Failed to stop TX DMA!
[ 1210.146417] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1210.146423] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1210.216737] ath: Failed to stop TX DMA!
[ 1210.230390] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1210.230395] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1210.300721] ath: Failed to stop TX DMA!
[ 1210.314366] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1210.314371] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1210.384723] ath: Failed to stop TX DMA!
[ 1210.398363] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1210.398369] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1210.468740] ath: Failed to stop TX DMA!
[ 1210.482382] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1210.482388] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1210.552738] ath: Failed to stop TX DMA!
[ 1210.566388] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1210.566394] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1210.636713] ath: Failed to stop TX DMA!
[ 1210.650373] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1210.650378] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1210.720700] ath: Failed to stop TX DMA!
[ 1210.734337] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00006040
[ 1210.734343] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1210.877987] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1210.877996] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1211.021760] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1211.021769] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1211.165797] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1211.165806] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1211.185997] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1211.186003] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1329.854889] ath: Failed to stop TX DMA!
[ 1329.863500] ath: Failed to stop TX DMA!
[ 1329.877138] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00006040
[ 1329.877143] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1329.897287] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1329.897292] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1329.964799] ath: Failed to stop TX DMA!
[ 1329.978443] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1329.978449] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1330.048713] ath: Failed to stop TX DMA!
[ 1330.062353] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1330.062358] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1330.132704] ath: Failed to stop TX DMA!
[ 1330.146349] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1330.146354] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1330.216712] ath: Failed to stop TX DMA!
[ 1330.230349] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1330.230354] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1330.300712] ath: Failed to stop TX DMA!
[ 1330.314348] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1330.314354] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1330.384712] ath: Failed to stop TX DMA!
[ 1330.398348] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1330.398354] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1330.468739] ath: Failed to stop TX DMA!
[ 1330.482375] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1330.482381] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1330.552712] ath: Failed to stop TX DMA!
[ 1330.566355] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1330.566360] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1330.636710] ath: Failed to stop TX DMA!
[ 1330.650349] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1330.650354] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1330.720774] ath: Failed to stop TX DMA!
[ 1330.734481] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00006040
[ 1330.734487] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1330.877961] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1330.877970] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1331.021807] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1331.021816] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1331.165893] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1331.165902] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up
[ 1331.186077] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
[ 1331.186082] ath: Could not stop RX, we could be confusing the DMA
engine when we start RX up

** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: K53BY
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: 209
board_vendor: ASUSTeK Computer Inc.
board_name: K53BY
board_version: 1.0

** Loaded modules:
Module * * * * * * * * *Size *Used by
mperf * * * * * * * * *12411 *0
cpufreq_userspace * * *12576 *0
cpufreq_powersave * * *12454 *0
cpufreq_conservative * *13147 *0
cpufreq_stats * * * * *12762 *0
parport_pc * * * * * * 22191 *0
ppdev * * * * * * * * *12725 *0
lp * * * * * * * * * * 17190 *0
parport * * * * * * * *31650 *3 parport_pc,ppdev,lp
bridge * * * * * * * * 65614 *0
stp * * * * * * * * * *12392 *1 bridge
bnep * * * * * * * * * 17424 *2
rfcomm * * * * * * * * 32744 *0
bluetooth * * * * * * 107224 *10 bnep,rfcomm
crc16 * * * * * * * * *12343 *1 bluetooth
vboxnetadp * * * * * * 13185 *0
vboxnetflt * * * * * * 24179 *0
vboxdrv * * * * * * * 178736 *2 vboxnetadp,vboxnetflt
binfmt_misc * * * * * *12914 *1
uinput * * * * * * * * 17392 *1
fuse * * * * * * * * * 61554 *1
nfsd * * * * * * * * *258506 *2
nfs * * * * * * * * * 251154 *0
lockd * * * * * * * * *70844 *2 nfsd,nfs
fscache * * * * * * * *36071 *1 nfs
auth_rpcgss * * * * * *36788 *2 nfsd,nfs
nfs_acl * * * * * * * *12511 *2 nfsd,nfs
sunrpc * * * * * * * *162130 *6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
loop * * * * * * * * * 22479 *0
snd_hda_codec_realtek * 283734 *1
snd_hda_codec_hdmi * * 22174 *1
snd_hda_intel * * * * *25946 *1
uvcvideo * * * * * * * 57386 *0
snd_hda_codec * * * * *67865 *3
snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_i ntel
videodev * * * * * * * 66266 *1 uvcvideo
media * * * * * * * * *18148 *1 videodev
snd_hwdep * * * * * * *13148 *1 snd_hda_codec
snd_pcm * * * * * * * *67276 *3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
v4l2_compat_ioctl32 * *16575 *1 videodev
snd_seq * * * * * * * *44678 *0
snd_timer * * * * * * *22658 *2 snd_pcm,snd_seq
arc4 * * * * * * * * * 12458 *2
ecb * * * * * * * * * *12737 *2
snd_seq_device * * * * 13155 *1 snd_seq
ath9k * * * * * * * * *71748 *0
mac80211 * * * * * * *181270 *1 ath9k
ath9k_common * * * * * 12732 *1 ath9k
ath9k_hw * * * * * * *277119 *2 ath9k,ath9k_common
snd * * * * * * * * * *52324 *11
snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_i ntel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_t imer,snd_seq_device
radeon * * * * * * * *743013 *3
ath * * * * * * * * * *21306 *2 ath9k,ath9k_hw
ttm * * * * * * * * * *52224 *1 radeon
drm_kms_helper * * * * 26950 *1 radeon
cfg80211 * * * * * * *126244 *3 ath9k,mac80211,ath
drm * * * * * * * * * 166500 *5 radeon,ttm,drm_kms_helper
tpm_tis * * * * * * * *13125 *0
soundcore * * * * * * *13014 *1 snd
asus_nb_wmi * * * * * *12393 *0
tpm * * * * * * * * * *17756 *1 tpm_tis
asus_wmi * * * * * * * 18488 *1 asus_nb_wmi
psmouse * * * * * * * *55199 *0
pcspkr * * * * * * * * 12579 *0
sparse_keymap * * * * *12760 *1 asus_wmi
snd_page_alloc * * * * 12969 *2 snd_hda_intel,snd_pcm
i2c_piix4 * * * * * * *12536 *0
i2c_algo_bit * * * * * 12834 *1 radeon
rfkill * * * * * * * * 19014 *5 bluetooth,cfg80211,asus_wmi
i2c_core * * * * * * * 23766 *6
videodev,radeon,drm_kms_helper,drm,i2c_piix4,i2c_a lgo_bit
tpm_bios * * * * * * * 12903 *1 tpm
ac * * * * * * * * * * 12624 *0
battery * * * * * * * *13109 *0
pci_hotplug * * * * * *30807 *1 asus_wmi
serio_raw * * * * * * *12878 *0
power_supply * * * * * 13475 *3 radeon,ac,battery
k10temp * * * * * * * *12611 *0
evdev * * * * * * * * *17475 *20
processor * * * * * * *27431 *2
wmi * * * * * * * * * *13202 *1 asus_wmi
video * * * * * * * * *17553 *0
button * * * * * * * * 12895 *0
ext3 * * * * * * * * *112254 *2
jbd * * * * * * * * * *41698 *1 ext3
mbcache * * * * * * * *12930 *1 ext3
usb_storage * * * * * *43639 *0
uas * * * * * * * * * *13151 *0
sg * * * * * * * * * * 25769 *0
sr_mod * * * * * * * * 21824 *0
sd_mod * * * * * * * * 35644 *4
crc_t10dif * * * * * * 12348 *1 sd_mod
cdrom * * * * * * * * *35134 *1 sr_mod
ata_generic * * * * * *12479 *0
ohci_hcd * * * * * * * 26362 *0
ahci * * * * * * * * * 25089 *4
libahci * * * * * * * *22616 *1 ahci
pata_atiixp * * * * * *12689 *0
libata * * * * * * * *151572 *4 ata_generic,ahci,libahci,pata_atiixp
ehci_hcd * * * * * * * 39487 *0
thermal * * * * * * * *17330 *0
thermal_sys * * * * * *17939 *3 processor,video,thermal
scsi_mod * * * * * * *161557 *6 usb_storage,uas,sg,sr_mod,sd_mod,libata
usbcore * * * * * * * 127203 *6 uvcvideo,usb_storage,uas,ohci_hcd,ehci_hcd
r8169 * * * * * * * * *37356 *0
mii * * * * * * * * * *12675 *1 r8169

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
* *link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
* *inet 127.0.0.1/8 scope host lo
* *inet6 ::1/128 scope host
* * * valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN qlen 1000
* *link/ether f4:6d:04:a4:da:d8 brd ff:ff:ff:ff:ff:ff
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state
DOWN qlen 1000
* *link/ether e0:b9:a5:80:d8:cf brd ff:ff:ff:ff:ff:ff
* *inet6 fe80::e2b9:a5ff:fe80:d8cf/64 scope link
* * * valid_lft forever preferred_lft forever
4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
* *link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
* *link/ether ba:0a:1d:37:ca:cb brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-| * Receive * * * * * * * * * * * * * * * * * * * * * * * *| *Transmit
*face |bytes * *packets errs drop fifo frame compressed
multicast|bytes * *packets errs drop fifo colls carrier compressed
* *lo: * *3721 * * *65 * *0 * *0 * *0 * * 0 * * * * *0 * * * * 0
3721 * * *65 * *0 * *0 * *0 * * 0 * * * 0 * * * * *0
*eth0: * * * 0 * * * 0 * *0 * *0 * *0 * * 0 * * * * *0 * * * * 0
*0 * * * 0 * *0 * *0 * *0 * * 0 * * * 0 * * * * *0
*wlan0: *375295 * *1005 * *0 * *0 * *0 * * 0 * * * * *0 * * * * 0
236598 * *1440 * *0 * *0 * *0 * * 0 * * * 0 * * * * *0
vboxnet0: * * * 0 * * * 0 * *0 * *0 * *0 * * 0 * * * * *0 * * * * 0
* *0 * * * 0 * *0 * *0 * *0 * * 0 * * * 0 * * * * *0
*pan0: * * * 0 * * * 0 * *0 * *0 * *0 * * 0 * * * * *0 * * * * 0
*0 * * * 0 * *0 * *0 * *0 * * 0 * * * 0 * * * * *0

*** Protocol statistics:
Ip:
* *1143 total packets received
* *8 with invalid addresses
* *0 forwarded
* *0 incoming packets discarded
* *1135 incoming packets delivered
* *1440 requests sent out
* *8 outgoing packets dropped
* *29 dropped because of missing route
Icmp:
* *20 ICMP messages received
* *0 input ICMP message failed.
* *ICMP input histogram:
* * * *destination unreachable: 20
* *80 ICMP messages sent
* *0 ICMP messages failed
* *ICMP output histogram:
* * * *destination unreachable: 80
IcmpMsg:
* * * *InType3: 20
* * * *OutType3: 80
Tcp:
* *99 active connections openings
* *0 passive connection openings
* *6 failed connection attempts
* *8 connection resets received
* *0 connections established
* *765 segments received
* *973 segments send out
* *61 segments retransmited
* *0 bad segments received.
* *13 resets sent
Udp:
* *345 packets received
* *82 packets to unknown port received.
* *0 packet receive errors
* *331 packets sent
UdpLite:
TcpExt:
* *41 TCP sockets finished time wait in fast timer
* *49 delayed acks sent
* *88 packet headers predicted
* *205 acknowledgments not containing data payload received
* *35 predicted acknowledgments
* *3 congestion windows recovered without slow start after partial ack
* *1 timeouts after SACK recovery
* *24 other TCP timeouts
* *1 connections reset due to unexpected data
* *8 connections reset due to early user close
* *1 connections aborted due to timeout
* *TCPSackShiftFallback: 1
IpExt:
* *InMcastPkts: 16
* *OutMcastPkts: 23
* *InBcastPkts: 80
* *OutBcastPkts: 78
* *InOctets: 378430
* *OutOctets: 182115
* *InMcastOctets: 4783
* *OutMcastOctets: 5063
* *InBcastOctets: 10766
* *OutBcastOctets: 10102

*** Device features:
eth0: 0x4180
lo: 0x201b7c65
pan0: 0xff78e5
vboxnet0: 0x4000
wlan0: 0x6000

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1510]
* * * *Subsystem: Advanced Micro Devices [AMD] Device [1022:1510]
* * * *Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32

00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device
[1002:9802] (prog-if 00 [VGA controller])
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 0, Cache Line Size: 64 bytes
* * * *Interrupt: pin A routed to IRQ 41
* * * *Region 0: Memory at b0000000 (32-bit, prefetchable) [size=256M]
* * * *Region 1: I/O ports at f000 [size=256]
* * * *Region 2: Memory at feb00000 (32-bit, non-prefetchable) [size=256K]
* * * *Expansion ROM at <unassigned> [disabled]
* * * *Capabilities: [50] Power Management version 3
* * * * * * * *Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
* * * * * * * *DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<4us, L1 unlimited
* * * * * * * * * * * *ExtTag+ RBE+ FLReset-
* * * * * * * *DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
* * * * * * * * * * * *RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
* * * * * * * * * * * *MaxPayload 128 bytes, MaxReadReq 128 bytes
* * * * * * * *DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
* * * * * * * *LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
Latency L0
<64ns, L1 <1us
* * * * * * * * * * * *ClockPM- Surprise- LLActRep- BwNot-
* * * * * * * *LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
* * * * * * * * * * * *ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
* * * * * * * *LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive-
BWMgmt- ABWMgmt-
* * * * * * * *DevCap2: Completion Timeout: Not Supported, TimeoutDis-
* * * * * * * *DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
* * * * * * * *LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
* * * * * * * * * * * * Transmit Margin: Normal Operating Range,
EnterModifiedCompliance-
ComplianceSOS-
* * * * * * * * * * * * Compliance De-emphasis: -6dB
* * * * * * * *LnkSta2: Current De-emphasis Level: -6dB
* * * *Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
* * * * * * * *Address: 00000000fee0300c *Data: 4161
* * * *Capabilities: [100 v1] Vendor Specific Information: ID=0001
Rev=1 Len=010 <?>
* * * *Kernel driver in use: radeon

00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1314]
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 0, Cache Line Size: 64 bytes
* * * *Interrupt: pin B routed to IRQ 42
* * * *Region 0: Memory at feb44000 (32-bit, non-prefetchable) [size=16K]
* * * *Capabilities: [50] Power Management version 3
* * * * * * * *Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
* * * * * * * *DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<4us, L1 unlimited
* * * * * * * * * * * *ExtTag+ RBE+ FLReset-
* * * * * * * *DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
* * * * * * * * * * * *RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
* * * * * * * * * * * *MaxPayload 128 bytes, MaxReadReq 128 bytes
* * * * * * * *DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
* * * * * * * *LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
Latency L0
<64ns, L1 <1us
* * * * * * * * * * * *ClockPM- Surprise- LLActRep- BwNot-
* * * * * * * *LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
* * * * * * * * * * * *ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
* * * * * * * *LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive-
BWMgmt- ABWMgmt-
* * * * * * * *DevCap2: Completion Timeout: Not Supported, TimeoutDis-
* * * * * * * *DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
* * * * * * * *LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
* * * * * * * * * * * * Transmit Margin: Normal Operating Range,
EnterModifiedCompliance-
ComplianceSOS-
* * * * * * * * * * * * Compliance De-emphasis: -6dB
* * * * * * * *LnkSta2: Current De-emphasis Level: -6dB
* * * *Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
* * * * * * * *Address: 00000000fee0300c *Data: 4169
* * * *Capabilities: [100 v1] Vendor Specific Information: ID=0001
Rev=1 Len=010 <?>
* * * *Kernel driver in use: HDA Intel

00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device
[1022:1512] (prog-if 00 [Normal decode])
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 0, Cache Line Size: 64 bytes
* * * *Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
* * * *I/O behind bridge: 0000e000-0000efff
* * * *Memory behind bridge: fea00000-feafffff
* * * *Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
* * * *Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
* * * *BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
* * * * * * * *PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
* * * *Capabilities: [50] Power Management version 3
* * * * * * * *Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
* * * * * * * *DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
* * * * * * * * * * * *ExtTag+ RBE+ FLReset-
* * * * * * * *DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
* * * * * * * * * * * *RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
* * * * * * * * * * * *MaxPayload 128 bytes, MaxReadReq 128 bytes
* * * * * * * *DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
* * * * * * * *LnkCap: Port #1, Speed 5GT/s, Width x4, ASPM L0s L1,
Latency L0 <64ns, L1 <1us
* * * * * * * * * * * *ClockPM- Surprise- LLActRep+ BwNot+
* * * * * * * *LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
Retrain- CommClk+
* * * * * * * * * * * *ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
* * * * * * * *LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+
BWMgmt+ ABWMgmt+
* * * * * * * *SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
HotPlug+ Surprise-
* * * * * * * * * * * *Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
* * * * * * * *SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
* * * * * * * * * * * *Control: AttnInd Unknown, PwrInd Unknown,
Power- Interlock-
* * * * * * * *SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
* * * * * * * * * * * *Changed: MRL- PresDet+ LinkState+
* * * * * * * *RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
* * * * * * * *RootCap: CRSVisible-
* * * * * * * *RootSta: PME ReqID 0000, PMEStatus- PMEPending-
* * * * * * * *DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
* * * * * * * *DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
* * * * * * * *LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
* * * * * * * * * * * * Transmit Margin: Normal Operating Range,
EnterModifiedCompliance-
ComplianceSOS-
* * * * * * * * * * * * Compliance De-emphasis: -6dB
* * * * * * * *LnkSta2: Current De-emphasis Level: -6dB
* * * *Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
* * * * * * * *Address: 0000000000000000 *Data: 0000
* * * *Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD]
Device [1022:1234]
* * * *Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
* * * *Capabilities: [100 v1] Vendor Specific Information: ID=0001
Rev=1 Len=010 <?>
* * * *Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32
* * * *Interrupt: pin A routed to IRQ 19
* * * *Region 0: I/O ports at f190 [size=8]
* * * *Region 1: I/O ports at f180 [size=4]
* * * *Region 2: I/O ports at f170 [size=8]
* * * *Region 3: I/O ports at f160 [size=4]
* * * *Region 4: I/O ports at f150 [size=16]
* * * *Region 5: Memory at feb4f000 (32-bit, non-prefetchable) [size=1K]
* * * *Capabilities: [70] SATA HBA v1.0 InCfgSpace
* * * *Capabilities: [a4] PCI Advanced Features
* * * * * * * *AFCap: TP+ FLR+
* * * * * * * *AFCtrl: FLR-
* * * * * * * *AFStatus: TP-
* * * *Kernel driver in use: ahci

00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32, Cache Line Size: 64 bytes
* * * *Interrupt: pin A routed to IRQ 18
* * * *Region 0: Memory at feb4e000 (32-bit, non-prefetchable) [size=4K]
* * * *Kernel driver in use: ohci_hcd

00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
EHCI Controller [1002:4396] (prog-if 20 [EHCI])
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32, Cache Line Size: 64 bytes
* * * *Interrupt: pin B routed to IRQ 17
* * * *Region 0: Memory at feb4d000 (32-bit, non-prefetchable) [size=256]
* * * *Capabilities: [c0] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * * * * * *Bridge: PM- B3+
* * * *Capabilities: [e4] Debug port: BAR=1 offset=00e0
* * * *Kernel driver in use: ehci_hcd

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32, Cache Line Size: 64 bytes
* * * *Interrupt: pin A routed to IRQ 18
* * * *Region 0: Memory at feb4c000 (32-bit, non-prefetchable) [size=4K]
* * * *Kernel driver in use: ohci_hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
EHCI Controller [1002:4396] (prog-if 20 [EHCI])
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32, Cache Line Size: 64 bytes
* * * *Interrupt: pin B routed to IRQ 17
* * * *Region 0: Memory at feb4b000 (32-bit, non-prefetchable) [size=256]
* * * *Capabilities: [c0] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * * * * * *Bridge: PM- B3+
* * * *Capabilities: [e4] Debug port: BAR=1 offset=00e0
* * * *Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller
[1002:4385] (rev 42)
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
* * * *Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Kernel driver in use: piix4_smbus

00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE
Controller [1002:439c] (rev 40) (prog-if 8a [Master SecP PriP])
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32
* * * *Interrupt: pin B routed to IRQ 17
* * * *Region 0: I/O ports at 01f0 [size=8]
* * * *Region 1: I/O ports at 03f4 [size=1]
* * * *Region 2: I/O ports at 0170 [size=8]
* * * *Region 3: I/O ports at 0374 [size=1]
* * * *Region 4: I/O ports at f100 [size=16]
* * * *Kernel driver in use: pata_atiixp

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel
HDA) [1002:4383] (rev 40)
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32, Cache Line Size: 64 bytes
* * * *Interrupt: pin A routed to IRQ 16
* * * *Region 0: Memory at feb40000 (64-bit, non-prefetchable) [size=16K]
* * * *Capabilities: [50] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Kernel driver in use: HDA Intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host
controller [1002:439d] (rev 40)
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI
Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 64
* * * *Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
* * * *Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
* * * *BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
* * * * * * * *PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32, Cache Line Size: 64 bytes
* * * *Interrupt: pin C routed to IRQ 18
* * * *Region 0: Memory at feb4a000 (32-bit, non-prefetchable) [size=4K]
* * * *Kernel driver in use: ohci_hcd

00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0]
(prog-if 00 [Normal decode])
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 0, Cache Line Size: 64 bytes
* * * *Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
* * * *I/O behind bridge: 0000d000-0000dfff
* * * *Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
* * * *Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
* * * *BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
* * * * * * * *PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
* * * *Capabilities: [50] Power Management version 3
* * * * * * * *Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
* * * * * * * *DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
* * * * * * * * * * * *ExtTag+ RBE+ FLReset-
* * * * * * * *DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
* * * * * * * * * * * *RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
* * * * * * * * * * * *MaxPayload 128 bytes, MaxReadReq 128 bytes
* * * * * * * *DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
* * * * * * * *LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<64ns, L1 <1us
* * * * * * * * * * * *ClockPM- Surprise- LLActRep+ BwNot+
* * * * * * * *LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
* * * * * * * * * * * *ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
* * * * * * * *LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt+ ABWMgmt-
* * * * * * * *RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
* * * * * * * *RootCap: CRSVisible-
* * * * * * * *RootSta: PME ReqID 0000, PMEStatus- PMEPending-
* * * * * * * *DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
* * * * * * * *DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
* * * * * * * *LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -3.5dB
* * * * * * * * * * * * Transmit Margin: Normal Operating Range,
EnterModifiedCompliance-
ComplianceSOS-
* * * * * * * * * * * * Compliance De-emphasis: -6dB
* * * * * * * *LnkSta2: Current De-emphasis Level: -6dB
* * * *Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
* * * * * * * *Address: 0000000000000000 *Data: 0000
* * * *Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:0000]
* * * *Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
* * * *Capabilities: [100 v1] Vendor Specific Information: ID=0001
Rev=1 Len=010 <?>
* * * *Kernel driver in use: pcieport

00:15.1 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a1]
(prog-if 00 [Normal decode])
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 0, Cache Line Size: 64 bytes
* * * *Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
* * * *Memory behind bridge: fe900000-fe9fffff
* * * *Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
* * * *BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
* * * * * * * *PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
* * * *Capabilities: [50] Power Management version 3
* * * * * * * *Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
* * * * * * * *DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
* * * * * * * * * * * *ExtTag+ RBE+ FLReset-
* * * * * * * *DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
* * * * * * * * * * * *RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
* * * * * * * * * * * *MaxPayload 128 bytes, MaxReadReq 128 bytes
* * * * * * * *DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
* * * * * * * *LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<64ns, L1 <1us
* * * * * * * * * * * *ClockPM- Surprise- LLActRep+ BwNot+
* * * * * * * *LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
* * * * * * * * * * * *ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
* * * * * * * *LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt+ ABWMgmt-
* * * * * * * *RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
* * * * * * * *RootCap: CRSVisible-
* * * * * * * *RootSta: PME ReqID 0000, PMEStatus- PMEPending-
* * * * * * * *DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
* * * * * * * *DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
* * * * * * * *LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -3.5dB
* * * * * * * * * * * * Transmit Margin: Normal Operating Range,
EnterModifiedCompliance-
ComplianceSOS-
* * * * * * * * * * * * Compliance De-emphasis: -6dB
* * * * * * * *LnkSta2: Current De-emphasis Level: -6dB
* * * *Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
* * * * * * * *Address: 0000000000000000 *Data: 0000
* * * *Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:0000]
* * * *Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
* * * *Capabilities: [100 v1] Vendor Specific Information: ID=0001
Rev=1 Len=010 <?>
* * * *Kernel driver in use: pcieport

00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32, Cache Line Size: 64 bytes
* * * *Interrupt: pin A routed to IRQ 18
* * * *Region 0: Memory at feb49000 (32-bit, non-prefetchable) [size=4K]
* * * *Kernel driver in use: ohci_hcd

00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
EHCI Controller [1002:4396] (prog-if 20 [EHCI])
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32, Cache Line Size: 64 bytes
* * * *Interrupt: pin B routed to IRQ 17
* * * *Region 0: Memory at feb48000 (32-bit, non-prefetchable) [size=256]
* * * *Capabilities: [c0] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * * * * * *Bridge: PM- B3+
* * * *Capabilities: [e4] Debug port: BAR=1 offset=00e0
* * * *Kernel driver in use: ehci_hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family
12h/14h Processor Function 0 [1022:1700] (rev 43)
* * * *Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family
12h/14h Processor Function 1 [1022:1701]
* * * *Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family
12h/14h Processor Function 2 [1022:1702]
* * * *Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family
12h/14h Processor Function 3 [1022:1703]
* * * *Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Capabilities: [f0] Secure device <?>
* * * *Kernel driver in use: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family
12h/14h Processor Function 4 [1022:1704]
* * * *Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family
12h/14h Processor Function 6 [1022:1718]
* * * *Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Family
12h/14h Processor Function 5 [1022:1716]
* * * *Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Family
12h/14h Processor Function 7 [1022:1719]
* * * *Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI
Seymour [AMD Radeon HD 6470M] [1002:6760] (prog-if 00 [VGA
controller])
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 0, Cache Line Size: 64 bytes
* * * *Interrupt: pin A routed to IRQ 43
* * * *Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
* * * *Region 2: Memory at fea20000 (64-bit, non-prefetchable) [size=128K]
* * * *Region 4: I/O ports at e000 [size=256]
* * * *Expansion ROM at fea00000 [disabled] [size=128K]
* * * *Capabilities: [50] Power Management version 3
* * * * * * * *Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
* * * * * * * *DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<4us, L1 unlimited
* * * * * * * * * * * *ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
* * * * * * * *DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
* * * * * * * * * * * *RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
* * * * * * * * * * * *MaxPayload 128 bytes, MaxReadReq 128 bytes
* * * * * * * *DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+
AuxPwr- TransPend-
* * * * * * * *LnkCap: Port #1, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0
<64ns, L1 <1us
* * * * * * * * * * * *ClockPM- Surprise- LLActRep- BwNot-
* * * * * * * *LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
Retrain- CommClk+
* * * * * * * * * * * *ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
* * * * * * * *LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
* * * * * * * *DevCap2: Completion Timeout: Not Supported, TimeoutDis-
* * * * * * * *DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
* * * * * * * *LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
* * * * * * * * * * * * Transmit Margin: Normal Operating Range,
EnterModifiedCompliance-
ComplianceSOS-
* * * * * * * * * * * * Compliance De-emphasis: -6dB
* * * * * * * *LnkSta2: Current De-emphasis Level: -6dB
* * * *Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
* * * * * * * *Address: 00000000fee0300c *Data: 4171
* * * *Capabilities: [100 v1] Vendor Specific Information: ID=0001
Rev=1 Len=010 <?>
* * * *Capabilities: [150 v1] Advanced Error Reporting
* * * * * * * *UESta: *DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
* * * * * * * *UEMsk: *DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
* * * * * * * *UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
* * * * * * * *CESta: *RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
* * * * * * * *CEMsk: *RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
* * * * * * * *AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap+ ChkEn-
* * * *Kernel driver in use: radeon

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
06)
* * * *Subsystem: ASUSTeK Computer Inc. Device [1043:101c]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 0, Cache Line Size: 64 bytes
* * * *Interrupt: pin A routed to IRQ 40
* * * *Region 0: I/O ports at d000 [size=256]
* * * *Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
* * * *Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
* * * *Capabilities: [40] Power Management version 3
* * * * * * * *Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
* * * * * * * *Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
* * * *Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
* * * * * * * *Address: 00000000fee0300c *Data: 4141
* * * *Capabilities: [70] Express (v2) Endpoint, MSI 01
* * * * * * * *DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
* * * * * * * * * * * *ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
* * * * * * * *DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
* * * * * * * * * * * *RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
* * * * * * * * * * * *MaxPayload 128 bytes, MaxReadReq 4096 bytes
* * * * * * * *DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
* * * * * * * *LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
unlimited, L1 <64us
* * * * * * * * * * * *ClockPM+ Surprise- LLActRep- BwNot-
* * * * * * * *LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
* * * * * * * * * * * *ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
* * * * * * * *LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
* * * * * * * *DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
* * * * * * * *DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
* * * * * * * *LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
* * * * * * * * * * * * Transmit Margin: Normal Operating Range,
EnterModifiedCompliance-
ComplianceSOS-
* * * * * * * * * * * * Compliance De-emphasis: -6dB
* * * * * * * *LnkSta2: Current De-emphasis Level: -6dB
* * * *Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
* * * * * * * *Vector table: BAR=4 offset=00000000
* * * * * * * *PBA: BAR=4 offset=00000800
* * * *Capabilities: [d0] Vital Product Data
* * * * * * * *No end tag found
* * * *Capabilities: [100 v1] Advanced Error Reporting
* * * * * * * *UESta: *DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
* * * * * * * *UEMsk: *DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
* * * * * * * *UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
* * * * * * * *CESta: *RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
* * * * * * * *CEMsk: *RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
* * * * * * * *AERCap: First Error Pointer: 0e, GenCap+ CGenEn- ChkCap+ ChkEn-
* * * *Capabilities: [140 v1] Virtual Channel
* * * * * * * *Caps: * LPEVC=0 RefClk=100ns PATEntryBits=1
* * * * * * * *Arb: * *Fixed- WRR32- WRR64- WRR128-
* * * * * * * *Ctrl: * ArbSelect=Fixed
* * * * * * * *Status: InProgress-
* * * * * * * *VC0: * *Caps: * PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
* * * * * * * * * * * *Arb: * *Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
* * * * * * * * * * * *Ctrl: * Enable+ ID=0 ArbSelect=Fixed TC/VC=01
* * * * * * * * * * * *Status: NegoPending- InProgress-
* * * *Capabilities: [160 v1] Device Serial Number 56-00-00-00-68-4c-e0-00
* * * *Kernel driver in use: r8169

04:00.0 Network controller [0280]: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
* * * *Subsystem: AzureWave Device [1a3b:1089]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 0, Cache Line Size: 64 bytes
* * * *Interrupt: pin A routed to IRQ 17
* * * *Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=64K]
* * * *Capabilities: [40] Power Management version 3
* * * * * * * *Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA
PME(D0+,D1+,D2-,D3hot+,D3cold+)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
* * * * * * * *Address: 00000000 *Data: 0000
* * * *Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
* * * * * * * *DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
* * * * * * * * * * * *ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
* * * * * * * *DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
* * * * * * * * * * * *RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
* * * * * * * * * * * *MaxPayload 128 bytes, MaxReadReq 128 bytes
* * * * * * * *DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq-
AuxPwr+ TransPend-
* * * * * * * *LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<512ns, L1 <64us
* * * * * * * * * * * *ClockPM- Surprise- LLActRep- BwNot-
* * * * * * * *LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
* * * * * * * * * * * *ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
* * * * * * * *LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
* * * * * * * *DevCap2: Completion Timeout: Not Supported, TimeoutDis+
* * * * * * * *DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
* * * * * * * *LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
* * * * * * * * * * * * Transmit Margin: Normal Operating Range,
EnterModifiedCompliance-
ComplianceSOS-
* * * * * * * * * * * * Compliance De-emphasis: -6dB
* * * * * * * *LnkSta2: Current De-emphasis Level: -6dB
* * * *Capabilities: [100 v1] Advanced Error Reporting
* * * * * * * *UESta: *DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
* * * * * * * *UEMsk: *DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
* * * * * * * *UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
* * * * * * * *CESta: *RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
* * * * * * * *CEMsk: *RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
* * * * * * * *AERCap: First Error Pointer: 0e, GenCap+ CGenEn- ChkCap+ ChkEn-
* * * *Capabilities: [140 v1] Virtual Channel
* * * * * * * *Caps: * LPEVC=0 RefClk=100ns PATEntryBits=1
* * * * * * * *Arb: * *Fixed- WRR32- WRR64- WRR128-
* * * * * * * *Ctrl: * ArbSelect=Fixed
* * * * * * * *Status: InProgress-
* * * * * * * *VC0: * *Caps: * PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
* * * * * * * * * * * *Arb: * *Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
* * * * * * * * * * * *Ctrl: * Enable+ ID=0 ArbSelect=Fixed TC/VC=01
* * * * * * * * * * * *Status: NegoPending- InProgress-
* * * *Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12
* * * *Capabilities: [170 v1] Power Budgeting <?>
* * * *Kernel driver in use: ath9k


** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0bda:0138 Realtek Semiconductor Corp.
Bus 001 Device 002: ID 04f2:b23b Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.2
*APT prefers stable-updates
*APT policy: (990, 'stable-updates'), (990, 'stable'), (101,
'testing'), (99, 'testing'), (98, 'unstable'), (97, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.39-bpo.2-amd64 (SMP w/2 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.39-bpo.2-amd64 depends on:
ii *debconf [debconf-2.0] * * * 1.5.36.1 * * Debian configuration management sy
ii *initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii *linux-base * * * * * * * * *3.3~bpo60+1 *Linux image base package
ii *module-init-tools * * * * * 3.12-1 * * * tools for managing Linux kernel mo

Versions of packages linux-image-2.6.39-bpo.2-amd64 recommends:
ii *firmware-linux-free * *2.6.32-35squeeze2 Binary firmware for various driver

Versions of packages linux-image-2.6.39-bpo.2-amd64 suggests:
ii *grub-pc * * * * * * * * 1.98+20100804-14 GRand Unified Bootloader, version
pn *linux-doc-2.6.39 * * * *<none> * * * * * (no description available)

Versions of packages linux-image-2.6.39-bpo.2-amd64 is related to:
pn *firmware-bnx2 * * * * * * * <none> * * * (no description available)
pn *firmware-bnx2x * * * * * * *<none> * * * (no description available)
pn *firmware-ipw2x00 * * * * * *<none> * * * (no description available)
pn *firmware-ivtv * * * * * * * <none> * * * (no description available)
pn *firmware-iwlwifi * * * * * *<none> * * * (no description available)
ii *firmware-linux * * * * * * *0.32~bpo60+1 Binary firmware for various driver
ii *firmware-linux-nonfree * * *0.32~bpo60+1 Binary firmware for various driver
pn *firmware-qlogic * * * * * * <none> * * * (no description available)
pn *firmware-ralink * * * * * * <none> * * * (no description available)
pn *xen-hypervisor * * * * * * *<none> * * * (no description available)

-- debconf information:
*linux-image-2.6.39-bpo.2-amd64/postinst/missing-firmware-2.6.39-bpo.2-amd64:
*linux-image-2.6.39-bpo.2-amd64/postinst/ignoring-ramdisk:
*linux-image-2.6.39-bpo.2-amd64/postinst/depmod-error-initrd-2.6.39-bpo.2-amd64:
false
*linux-image-2.6.39-bpo.2-amd64/prerm/removing-running-kernel-2.6.39-bpo.2-amd64:
true



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: CAMw0szKtYFB6TWFp=NY+pEpw_SHxxVQi8+nvQOqRq7f7V4+v= w@mail.gmail.com">http://lists.debian.org/CAMw0szKtYFB6TWFp=NY+pEpw_SHxxVQi8+nvQOqRq7f7V4+v= w@mail.gmail.com
 

Thread Tools




All times are GMT. The time now is 06:41 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org