FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 10-04-2011, 06:04 PM
PICCORO McKAY Lenz
 
Default Bug#644279: linux-image-2.6.38-bpo.2-686: Disabling IRQ 10 hang and crash laptops, ALL KERNELS on squeeze & backports

Package: linux-2.6
Version: 2.6.38-5~bpo60+1
Justification: breaks the whole system
Severity: critical
Tags: d-i upstream

The system (independient of kernel even backport version or oficial ) hangs, and stops,


i investigated with dmesg, and so then found this trace :

irq 10: nobody cared (try booting with the "irqpoll" option)

..after few second system hangs! The irq acpi asigned its for sound card when acpi are enabled.



In next boot i disable acpi complety parsing acpi=off and system works perfectly, this*
with 2.6.32 or 2.6.38 independiently

PLEASE note that the lspci and others results on report was when acpi are disabled!



I'v also instaled later 2.6.39 from backport and hands but no rare or weird messages on dmesg where found!!!
-- Package-specific info:
** Kernel log: boot messages should be attached

root@massenkoh:/var/log# cat dmesg.0 | grep " 50"

[ 50.898606] irq 10: nobody cared (try booting with the "irqpoll" option)
[ 50.898665] Pid: 0, comm: swapper Not tainted 2.6.38-bpo.2-686 #1
[ 50.898667] Call Trace:
[ 50.898677] [<c106f1ae>] ? __report_bad_irq+0x24/0x69


[ 50.898682] [<c106f1b5>] ? __report_bad_irq+0x2b/0x69
[ 50.898686] [<c106f2da>] ? note_interrupt+0xe7/0x13d
[ 50.898690] [<c106f9f8>] ? handle_level_irq+0x66/0x9b
[ 50.898694] [<c106f992>] ? handle_level_irq+0x0/0x9b


[ 50.898696] <IRQ> [<c1003e1e>] ? do_IRQ+0x2e/0x84
[ 50.898705] [<c10349de>] ? __do_softirq+0x0/0x14e
[ 50.898708] [<c10034b0>] ? common_interrupt+0x30/0x38
[ 50.898712] [<c10349de>] ? __do_softirq+0x0/0x14e


[ 50.898716] [<c103007b>] ? console_unlock+0x10f/0x18e
[ 50.898722] [<c11300d8>] ? md5_transform+0x2fc/0x7b9
[ 50.898726] [<c1034a1c>] ? __do_softirq+0x3e/0x14e
[ 50.898729] [<c10349de>] ? __do_softirq+0x0/0x14e


[ 50.898731] <IRQ> [<c1034962>] ? irq_exit+0x26/0x59
[ 50.898739] [<c1015e54>] ? smp_apic_timer_interrupt+0x6b/0x75
[ 50.898745] [<c1290ad9>] ? apic_timer_interrupt+0x31/0x38
[ 50.898773] [<f8126cde>] ? acpi_idle_enter_bm+0x247/0x284 [processor]


[ 50.898779] [<c11e25bf>] ? cpuidle_idle_call+0xd4/0x15d
[ 50.898782] [<c1002201>] ? cpu_idle+0x95/0xb0
[ 50.898787] [<c13f38a6>] ? start_kernel+0x333/0x338
[ 50.898790] handlers:


[ 50.898811] [<f8480cc5>] (sdhci_irq+0x0/0x45f [sdhci])
[ 50.898870] [<f82754ed>] (tifm_7xx1_isr+0x0/0xb8 [tifm_7xx1])
[ 50.898931] [<f82d2f2f>] (yenta_interrupt+0x0/0xb5 [yenta_socket])

[ 50.898995] [<f8404fdd>] (usb_hcd_irq+0x0/0x60 [usbcore])

[ 50.899059] [<f8404fdd>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 50.899121] Disabling IRQ #10
root@massenkoh:/var/log#

also this weird when acpi are enabled:

Sep 12 17:33:19 massenkoh kernel: [ 9.550753] firewire_ohci 0000:07:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ


17
Sep 12 17:33:19 massenkoh kernel: [ 9.590678] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Sep 12 17:33:19 massenkoh kernel: [ 9.590684] ACPI: I/O resource 0000:00:1f.3 [0x18c0-0x18df] conflicts with ACPI


region SMBI [0x18c0-0x18cf]
Sep 12 17:33:19 massenkoh kernel: [ 9.590781] ACPI: If an ACPI driver is available for this device, you should us
e it instead of the native driver
Sep 12 17:33:19 massenkoh kernel: [ 9.604197] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks


Sep 12 17:33:19 massenkoh kernel: [ 9.604200] iwlagn: Copyright(c) 2003-2009 Intel Corporation
Sep 12 17:33:19 massenkoh kernel: [ 9.604299] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17


Sep 12 17:33:19 massenkoh kernel: [ 9.604335] iwlagn 0000:03:00.0: setting latency timer to 64
Sep 12 17:33:19 massenkoh kernel: [ 9.604395] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=


0x4

** Model information
TOSHIBA Satellite A205 S4607

** Network interface configuration:

auto lo
iface lo inet loopback

wlan and eth0 still not active when kernel hands in mayority cases!



** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]


Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-


Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller])


Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0a00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]


Region 3: Memory at f0b00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)


Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0
Region 0: Memory at f0a80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)


Subsystem: Toshiba America Info Systems Toshiba Satellite A100-796 audio (Realtek ALC861) [1179:ff10]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0b40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel



00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+


Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0


I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0600000-f06fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-


BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])


Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0700000-f07fffff
Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff


Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-


Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+


Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0


I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0800000-f08fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-


BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])


Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])


Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])


Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])


Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])


Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0d44000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])


Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0
Bus: primary=00, secondary=07, subordinate=0b, sec-latency=56
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f0900000-f09fffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff


Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-


Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-


Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])


Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 18b0 [size=16]


Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: Toshiba America Info Systems Device [1179:ff10]


Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18c0 [size=32]
Kernel driver in use: i801_smbus

02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller [11ab:4353] (rev 14)


Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
Capabilities: <access denied>


Kernel driver in use: sky2

03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
Subsystem: Intel Corporation Vaio VGN-SZ79SN_C [8086:1100]


Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f0700000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn



07:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-


Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0906000 (32-bit, non-prefetchable) [size=4K]


Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 84000000-87fff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff


BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

07:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI])


Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 128 (500ns min, 1000ns max), Cache Line Size: 16 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0905000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f0900000 (32-bit, non-prefetchable) [size=16K]


Capabilities: <access denied>
Kernel driver in use: firewire_ohci

07:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
Subsystem: Toshiba America Info Systems Device [1179:ff10]


Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0904000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1



07:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] (prog-if 01)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-


Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 18


Region 0: Memory at f0905800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd USB 2.0 Camera


Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)



Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.38-bpo.2-686 depends on:


ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii linux-base 3.3~bpo60+1 Linux image base package


ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.38-bpo.2-686 recommends:
ii firmware-linux-free 2.6.32-35squeeze2 Binary firmware for various driver


ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.38-bpo.2-686 suggests:
ii grub-pc 1.98+20100804-14 GRand Unified Bootloader, version


pn linux-doc-2.6.38 <none> (no description available)

Versions of packages linux-image-2.6.38-bpo.2-686 is related to:
ii firmware-bnx2 0.32~bpo60+1 Binary firmware for Broadcom NetXt


ii firmware-bnx2x 0.32~bpo60+1 Binary firmware for Broadcom NetXt
ii firmware-ipw2x00 0.32~bpo60+1 Binary firmware for Intel Pro Wire
ii firmware-ivtv 0.32~bpo60+1 Binary firmware for iTVC15-family


ii firmware-iwlwifi 0.32~bpo60+1 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.32~bpo60+1 Binary firmware for various driver


ii firmware-qlogic 0.32~bpo60+1 Binary firmware for QLogic IBA7220
ii firmware-ralink 0.32~bpo60+1 Binary firmware for Ralink wireles
pn xen-hypervisor <none> (no description available)



-- debconf information:
linux-image-2.6.38-bpo.2-686/postinst/depmod-error-initrd-2.6.38-bpo.2-686: false
linux-image-2.6.38-bpo.2-686/postinst/missing-firmware-2.6.38-bpo.2-686:
linux-image-2.6.38-bpo.2-686/prerm/removing-running-kernel-2.6.38-bpo.2-686: true


linux-image-2.6.38-bpo.2-686/postinst/ignoring-do-bootloader-2.6.38-bpo.2-686:

--
Lenz McKAY Gerardo (PICCORO)
http://qgqlochekone.blogspot.com



Cofundador de Venenux;* debian based multimedia alike free only zealots users (oh well, i try but..too many free guidelines buahhh)
http://shutendouji.net
creador de massenkoh linux; debian enhanchements for better up to date support on stable brand, including non-free soft.
 
Old 10-04-2011, 07:08 PM
Ben Hutchings
 
Default Bug#644279: linux-image-2.6.38-bpo.2-686: Disabling IRQ 10 hang and crash laptops, ALL KERNELS on squeeze & backports

On Tue, Oct 04, 2011 at 01:34:30PM -0430, PICCORO McKAY Lenz wrote:
> Package: linux-2.6
> Version: 2.6.38-5~bpo60+1
[...]

What about 3.0 (currently in testing and unstable)?

Ben.

--
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
- Albert Camus



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111004190804.GB3366@decadent.org.uk">http://lists.debian.org/20111004190804.GB3366@decadent.org.uk
 
Old 10-04-2011, 07:52 PM
PICCORO McKAY Lenz
 
Default Bug#644279: linux-image-2.6.38-bpo.2-686: Disabling IRQ 10 hang and crash laptops, ALL KERNELS on squeeze & backports

err currently i'm prefer stable.. this trend for lasted software its a windoze think

i' talking ab out stable kernel bug, what about that?
i'm running 2.6.39, quite more stable, but previosly i update alsa state of mixer, and also install a few packages..but acpi also fail with 2.6.39 too, and when hang i must boot with acpi=off and then test again with acpi full on

i thik this quite serious, u'm hope mi info help..*
On Tue, Oct 4, 2011 at 2:38 PM, Ben Hutchings <ben@decadent.org.uk> wrote:

On Tue, Oct 04, 2011 at 01:34:30PM -0430, PICCORO McKAY Lenz wrote:

> Package: linux-2.6

> Version: 2.6.38-5~bpo60+1

[...]



What about 3.0 (currently in testing and unstable)?



Ben.



--

Ben Hutchings

We get into the habit of living before acquiring the habit of thinking.

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *- Albert Camus



--
Lenz McKAY Gerardo (PICCORO)
http://qgqlochekone.blogspot.com

Cofundador de Venenux;* debian based multimedia alike free only zealots users (oh well, i try but..too many free guidelines buahhh)
http://shutendouji.net
creador de massenkoh linux; debian enhanchements for better up to date support on stable brand, including non-free soft.
 
Old 10-04-2011, 08:00 PM
Jonathan Nieder
 
Default Bug#644279: linux-image-2.6.38-bpo.2-686: Disabling IRQ 10 hang and crash laptops, ALL KERNELS on squeeze & backports

Hi,

PICCORO McKAY Lenz wrote:

> i' talking ab out stable kernel bug, what about that?

A 3.x kernel (to help us debug, not as a long-term solution) should
not require any dependencies except for linux-base and initramfs-tools
from outside squeeze.

[...]
> but acpi also fail with 2.6.39 too,
> and when hang i must boot with acpi=off and then test again with acpi full
> on

If this is still broken with a 3.x kernel, then we can work with
upstream on fixing it there. If it is already fixed with a 3.x
kernel, we can look for a fix and try to backport it to squeeze.

Hope that clarifies a little,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111004200048.GC28592@elie">http://lists.debian.org/20111004200048.GC28592@elie
 
Old 10-04-2011, 08:07 PM
PICCORO McKAY Lenz
 
Default Bug#644279: linux-image-2.6.38-bpo.2-686: Disabling IRQ 10 hang and crash laptops, ALL KERNELS on squeeze & backports

ok thanks,

i will test again, currently 2.6.39 works well, more stable and do not
hang too much,

but what about squeeze brand 2.6.32, this fails too!

On Tue, Oct 4, 2011 at 3:30 PM, Jonathan Nieder <jrnieder@gmail.com> wrote:
>
> Hi,
>
> PICCORO McKAY Lenz wrote:
>
> > i' talking ab out stable kernel bug, what about that?
>
> A 3.x kernel (to help us debug, not as a long-term solution) should
> not require any dependencies except for linux-base and initramfs-tools
> from outside squeeze.
>
> [...]
> > but acpi also fail with 2.6.39 too,
> > and when hang i must boot with acpi=off and then test again with acpi full
> > on
>
> If this is still broken with a 3.x kernel, then we can work with
> upstream on fixing it there. *If it is already fixed with a 3.x
> kernel, we can look for a fix and try to backport it to squeeze.
>
> Hope that clarifies a little,
> Jonathan



--
Lenz McKAY Gerardo (PICCORO)
http://qgqlochekone.blogspot.com
Cofundador de Venenux;* debian based multimedia alike free only
zealots users (oh well, i try but..too many free guidelines buahhh)
http://shutendouji.net
creador de massenkoh linux; debian enhanchements for better up to date
support on stable brand, including non-free soft.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: CALci+FQxbxGhs2qtxvjaodTj8nS5AM4S2_wOe8b=OwhpRCWDQ g@mail.gmail.com">http://lists.debian.org/CALci+FQxbxGhs2qtxvjaodTj8nS5AM4S2_wOe8b=OwhpRCWDQ g@mail.gmail.com
 
Old 10-04-2011, 08:17 PM
Jonathan Nieder
 
Default Bug#644279: linux-image-2.6.38-bpo.2-686: Disabling IRQ 10 hang and crash laptops, ALL KERNELS on squeeze & backports

PICCORO McKAY Lenz wrote:

> i will test again, currently 2.6.39 works well, more stable and do not
> hang too much,

... when you add the "acpi=off" boot-time parameter. I wouldn't call
that working.

> but what about squeeze brand 2.6.32, this fails too!

Actually, we don't care about 2.6.39 at all, except when it is relevant
to fixing 2.6.32 or 3.x. If you don't believe me, feel free to look
around at http://bugs.debian.org/src:linux-2.6 or
http://lists.debian.org/debian-kernel/

Thanks again for your work. Let's get this fixed.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111004201737.GD28592@elie">http://lists.debian.org/20111004201737.GD28592@elie
 
Old 10-04-2011, 08:24 PM
PICCORO McKAY Lenz
 
Default Bug#644279: linux-image-2.6.38-bpo.2-686: Disabling IRQ 10 hang and crash laptops, ALL KERNELS on squeeze & backports

On Tue, Oct 4, 2011 at 3:47 PM, Jonathan Nieder <jrnieder@gmail.com> wrote:
> PICCORO McKAY Lenz wrote:
>
>> i will test again, currently 2.6.39 works well, more stable and do not
>> hang too much,
>
> ... when you add the "acpi=off" boot-time parameter. *I wouldn't call
> that working.
ok obviously this its not the idea!
>
>> but what about squeeze brand 2.6.32, this fails too!
>
> Actually, we don't care about 2.6.39 at all, except when it is relevant
> to fixing 2.6.32 or 3.x. *If you don't believe me, feel free to look
> around at http://bugs.debian.org/src:linux-2.6 or
> http://lists.debian.org/debian-kernel/
>
well 2.6.32 fails, and 3.0.X/3.0 i currently installing, 2.6.39 works
correclty after update alsa modules.. this can be help..

i will mail tomorrow after few test..

thanks
> Thanks again for your work. *Let's get this fixed.
>



--
Lenz McKAY Gerardo (PICCORO)
http://qgqlochekone.blogspot.com
Cofundador de Venenux;* debian based multimedia alike free only
zealots users (oh well, i try but..too many free guidelines buahhh)
http://shutendouji.net
creador de massenkoh linux; debian enhanchements for better up to date
support on stable brand, including non-free soft.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: CALci+FQ6rOerY2nKt8SEG4zGD+KoVd7tSP0y2eWOEfU4gPv=G g@mail.gmail.com">http://lists.debian.org/CALci+FQ6rOerY2nKt8SEG4zGD+KoVd7tSP0y2eWOEfU4gPv=G g@mail.gmail.com
 
Old 10-04-2011, 08:27 PM
Ben Hutchings
 
Default Bug#644279: linux-image-2.6.38-bpo.2-686: Disabling IRQ 10 hang and crash laptops, ALL KERNELS on squeeze & backports

On Tue, Oct 04, 2011 at 03:22:17PM -0430, PICCORO McKAY Lenz wrote:
> err currently i'm prefer stable.. this trend for lasted software its a
> windoze think
>
> i' talking ab out stable kernel bug, what about that?
[...]

I'm asking you to test 3.0, to see whether the bug has been fixed
upstream. I agree that it should still be fixed in stable.

Ben.

--
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
- Albert Camus



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111004202742.GC3366@decadent.org.uk">http://lists.debian.org/20111004202742.GC3366@decadent.org.uk
 
Old 10-04-2011, 08:33 PM
Jonathan Nieder
 
Default Bug#644279: linux-image-2.6.38-bpo.2-686: Disabling IRQ 10 hang and crash laptops, ALL KERNELS on squeeze & backports

Jonathan Nieder wrote:
> PICCORO McKAY Lenz wrote:

>> but what about squeeze brand 2.6.32, this fails too!
>
> Actually, we don't care about 2.6.39 at all, except when it is relevant
> to fixing 2.6.32 or 3.x.

Ah, sorry, that was less helpful than it should have been. I didn't
actually answer your question.

I'd suggest working on fixing the bootup in 3.x first, in cooperation
with upstream. Afterwards, we would make sure the fix works in
2.6.32.y, too (I called this "backporting the fix", but it has nothing
to do with backports.debian.org).

Once you are able to reproduce this with a 3.x kernel, please attach

* dmesg output from right after bootup when experiencing the bug (you
might need to set up a serial console or netconsole or take a
photograph of the screen to get this. A photo is fine.)

* dmesg and acpidump output from right after bootup when not
experiencing the bug (using acpi=off, noapic, or something like
that)



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111004203327.GA29092@elie">http://lists.debian.org/20111004203327.GA29092@elie
 
Old 10-06-2011, 01:01 PM
PICCORO McKAY Lenz
 
Default Bug#644279: linux-image-2.6.38-bpo.2-686: Disabling IRQ 10 hang and crash laptops, ALL KERNELS on squeeze & backports

i'm just test 3.0 & 3.0.X and works well, when test, works well and
then fail, was much more stable and fail once: as I said earlier, each
kernel update/change, changes level IDs of sound card by module
asigned, then error its now present again. I had to reboot with acpi =
off, then restart the sound card with "alsactl init" and then boot
again normally without problem, so does same with the other kernel
2.6.39 and 2.6.32

seem that module for sound card changes every kernel update/change,
and the error apaers, but i not sure.. due other day error was on
other module..

i will test for a while more, and just report tomorow

see you i will hope this help a litte more

On Tue, Oct 4, 2011 at 5:27 PM, Ben Hutchings <ben@decadent.org.uk> wrote:
> On Tue, Oct 04, 2011 at 03:22:17PM -0430, PICCORO McKAY Lenz wrote:
>> err currently i'm prefer stable.. this trend for lasted software its a
>> windoze think
>>
>> i' talking ab out stable kernel bug, what about that?
> [...]
>
> I'm asking you to test 3.0, to see whether the bug has been fixed
> upstream. *I agree that it should still be fixed in stable.
>
> Ben.
>
> --
> Ben Hutchings
> We get into the habit of living before acquiring the habit of thinking.
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *- Albert Camus
>



--
Lenz McKAY Gerardo (PICCORO)
http://qgqlochekone.blogspot.com
Cofundador de Venenux;* debian based multimedia alike free only
zealots users (oh well, i try but..too many free guidelines buahhh)
http://shutendouji.net
creador de massenkoh linux; debian enhanchements for better up to date
support on stable brand, including non-free soft.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: CALci+FQ2DzueGwcJMw4FHvv2gVVOG-O9jBh0Y0NAV9mrC2RR-A@mail.gmail.com">http://lists.debian.org/CALci+FQ2DzueGwcJMw4FHvv2gVVOG-O9jBh0Y0NAV9mrC2RR-A@mail.gmail.com
 

Thread Tools




All times are GMT. The time now is 07:21 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org