Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#642911: linux-image-2.6.32-5-686: Network connection fails under heavy load. (http://www.linux-archive.org/debian-kernel/579924-bug-642911-linux-image-2-6-32-5-686-network-connection-fails-under-heavy-load.html)

09-25-2011 03:48 PM

Bug#642911: linux-image-2.6.32-5-686: Network connection fails under heavy load.
 
Package: linux-2.6
Version: 2.6.32-35squeeze2
Severity: important



-- dmesg output when error occured:
[10547.092995] r8169: eth0: link up
[10553.286740] r8169: eth0: link up
[10715.593791] ------------[ cut here ]------------
[10715.593832] WARNING: at
/build/buildd-linux-2.6_2.6.32-35squeeze2-i386-XoyoyB/linux-2.6-2.6.32/debian/build/source_i386_none/net/
sched/sch_generic.c:261 dev_watchdog+0xbd/0x15d()
[10715.593853] Hardware name: CM-iAM/SBC-FITPC2i
[10715.593865] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out
[10715.593877] Modules linked in: nfs fscache nls_utf8 sg sr_mod cdrom
usb_storage isofs udf crc_itu_t sco bridge stp bnep l2cap blu
etooth parport_pc ppdev lp parport cpufreq_userspace
cpufreq_conservative cpufreq_stats cpufreq_powersave nfsd lockd nfs_acl
auth_rp
cgss sunrpc exportfs fuse ext2 coretemp acpi_cpufreq loop rt2870sta(C)
arc4 ecb snd_usb_audio rt2800usb snd_usb_lib rt2x00usb snd_se
q_midi snd_hda_codec_realtek snd_hda_intel rt2x00lib snd_seq_midi_event
mac80211 snd_hda_codec uvcvideo cfg80211 snd_rawmidi snd_pcm
snd_hwdep snd_seq usbhid videodev rfkill snd_timer snd_seq_device
psmouse snd crc_ccitt serio_raw evdev i2c_isch cdc_acm v4l1_compa
t soundcore hid battery ac button processor pcspkr snd_page_alloc
i2c_core video output ext4 mbcache jbd2 crc16 sd_mod crc_t10dif at
a_generic pata_sch libata uhci_hcd thermal sdhci_pci sdhci scsi_mod
r8169 ehci_hcd mii mmc_core led_class usbcore nls_base thermal_s
ys [last unloaded: scsi_wait_scan]
[10715.594268] Pid: 0, comm: swapper Tainted: G C 2.6.32-5-686 #1
[10715.594280] Call Trace:
[10715.594309] [<c1030709>] ? warn_slowpath_common+0x5e/0x8a
[10715.594330] [<c11e8eb8>] ? dev_watchdog+0x0/0x15d
[10715.594349] [<c1030767>] ? warn_slowpath_fmt+0x26/0x2a
[10715.594368] [<c11e8f75>] ? dev_watchdog+0xbd/0x15d
[10715.594393] [<c1020039>] ? load_balance_rt+0x0/0x3
[10715.594414] [<c104148a>] ? insert_work+0x71/0x78
[10715.594435] [<c103af4c>] ? run_timer_softirq+0x16a/0x1eb
[10715.594457] [<c10357da>] ? __do_softirq+0xaa/0x156
[10715.594477] [<c10358b7>] ? do_softirq+0x31/0x3c
[10715.594495] [<c1035991>] ? irq_exit+0x26/0x58
[10715.594516] [<c1004699>] ? do_IRQ+0x78/0x89
[10715.594535] [<c10037f0>] ? common_interrupt+0x30/0x38
[10715.594604] [<f7fe20f9>] ? acpi_idle_enter_bm+0x261/0x29c [processor]
[10715.594631] [<c11c69c9>] ? cpuidle_idle_call+0x68/0xbb
[10715.594651] [<c1002388>] ? cpu_idle+0x89/0xa5
[10715.594673] [<c13bf806>] ? start_kernel+0x318/0x31d
[10715.594686] ---[ end trace 74ae8a61fd1c8ad1 ]---
[10715.619380] r8169: eth0: link up

-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-35squeeze2) (dannf@debian.org)
(gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:51:05 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-686
root=UUID=c8369b5c-f8fa-42d3-a640-ed1feff58e85 ro pcie_aspm=off quiet

** Tainted: C (1024)
* Module from drivers/staging has been loaded.

** Kernel log:
[ 8.856720] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.894044] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
[ 8.895052] usbcore: registered new interface driver cdc_acm
[ 8.895533] cdc_acm: v0.26:USB Abstract Control Model driver for USB
modems and ISDN adapters
[ 9.009516] Linux video capture interface: v2.00
[ 9.096311] cfg80211: Using static regulatory domain info
[ 9.096318] cfg80211: Regulatory domain: US
[ 9.096323] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 9.096331] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 9.096338] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.096345] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.096352] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.096359] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.096367] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 9.096619] cfg80211: Calling CRDA for country: US
[ 9.490509] uvcvideo: Found UVC 1.00 device WC060 Series HD Webcam
(177f:0060)
[ 9.493141] input: WC060 Series HD Webcam as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
[ 9.493393] usbcore: registered new interface driver uvcvideo
[ 9.493544] USB Video Class driver (v0.1.0)
[ 9.837538] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 9.837622] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.840912] phy0: Selected rate control algorithm 'minstrel'
[ 9.842895] Registered led device: rt2800usb-phy0::radio
[ 9.842943] Registered led device: rt2800usb-phy0::assoc
[ 9.842991] Registered led device: rt2800usb-phy0::quality
[ 9.843563] usbcore: registered new interface driver rt2800usb
[ 9.985348] rt2870sta: module is from the staging directory, the
quality is unknown, you have been warned.
[ 9.996976] rtusb init --->
[ 9.997135] usbcore: registered new interface driver rt2870
[ 10.204541] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 10.206514] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 10.794546] usbcore: registered new interface driver snd-usb-audio
[ 11.407776] Adding 3906552k swap on /dev/sda2. Priority:-1 extents:1
across:3906552k
[ 11.825167] loop: module loaded
[ 13.938701] r8169: eth0: link down
[ 13.939194] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.432594] fuse init (API version 7.13)
[ 16.797262] RPC: Registered udp transport module.
[ 16.797269] RPC: Registered tcp transport module.
[ 16.797273] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.098293] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 17.414527] svc: failed to register lockdv1 RPC service (errno 97).
[ 17.417639] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 17.549776] NFSD: starting 90-second grace period
[ 19.314878] Bluetooth: Core ver 2.15
[ 19.315462] NET: Registered protocol family 31
[ 19.315476] Bluetooth: HCI device and connection manager initialized
[ 19.315492] Bluetooth: HCI socket layer initialized
[ 19.462223] Bluetooth: L2CAP ver 2.14
[ 19.462237] Bluetooth: L2CAP socket layer initialized
[ 19.760566] Bluetooth: RFCOMM TTY layer initialized
[ 19.760578] Bluetooth: RFCOMM socket layer initialized
[ 19.760583] Bluetooth: RFCOMM ver 1.11
[ 20.031845] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.031851] Bluetooth: BNEP filters: protocol multicast
[ 20.117107] Bridge firewalling registered
[ 20.266813] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.266819] Bluetooth: SCO socket layer initialized
[ 20.543047] lp: driver loaded but no devices found
[ 20.640278] ppdev: user-space parallel port driver
[ 96.860129] usb 1-1: USB disconnect, address 2
[ 96.860145] usb 1-1.1: USB disconnect, address 5
[ 96.861262] usb 1-1.3: USB disconnect, address 6
[ 96.891066] usb 1-1.4: USB disconnect, address 7
[ 97.132311] usb 1-1: new high speed USB device using ehci_hcd and
address 9
[ 97.266713] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 97.266731] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 97.266745] usb 1-1: Product: USB2.0 Hub
[ 97.267168] usb 1-1: configuration #1 chosen from 1 choice
[ 97.267922] hub 1-1:1.0: USB hub found
[ 97.269558] hub 1-1:1.0: 4 ports detected
[ 97.540859] usb 1-1.1: new high speed USB device using ehci_hcd and
address 10
[ 97.634837] usb 1-1.1: New USB device found, idVendor=05e3,
idProduct=0608
[ 97.634855] usb 1-1.1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 97.634869] usb 1-1.1: Product: USB2.0 Hub
[ 97.635310] usb 1-1.1: configuration #1 chosen from 1 choice
[ 97.637874] hub 1-1.1:1.0: USB hub found
[ 97.638272] hub 1-1.1:1.0: 4 ports detected
[ 97.712864] usb 1-1.3: new high speed USB device using ehci_hcd and
address 11
[ 97.861587] usb 1-1.3: New USB device found, idVendor=177f,
idProduct=0060
[ 97.861606] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 97.861620] usb 1-1.3: Product: WC060 Series HD Webcam
[ 97.861630] usb 1-1.3: Manufacturer: Sweex
[ 97.862075] usb 1-1.3: configuration #1 chosen from 1 choice
[ 97.864749] uvcvideo: Found UVC 1.00 device WC060 Series HD Webcam
(177f:0060)
[ 97.867683] input: WC060 Series HD Webcam as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.3/1-1.3:1.0/input/input7
[ 98.948819] usb 1-1.4: new full speed USB device using ehci_hcd and
address 12
[ 99.045589] usb 1-1.4: New USB device found, idVendor=03eb,
idProduct=204b
[ 99.045608] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 99.045621] usb 1-1.4: Product: CUL868
[ 99.045630] usb 1-1.4: Manufacturer: busware.de
[ 99.046077] usb 1-1.4: configuration #1 chosen from 1 choice
[ 99.046778] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
[ 146.358948] r8169: eth0: link up
[ 146.359889] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6446.200217] rt2800usb 1-7:1.0: firmware: requesting rt2870.bin
[ 6446.520840] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8310.840938] cfg80211: Calling CRDA for country: DE
[ 8320.957189] wlan0: no IPv6 routers present
[ 9590.696055] wlan0: no IPv6 routers present

** Model information
not available

** Loaded modules:
Module Size Used by
isofs 24608 0
udf 63002 0
crc_itu_t 1035 1 udf
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
sco 5885 2
bridge 33051 0
stp 996 1 bridge
bnep 7468 2
rfcomm 25215 0
l2cap 21721 4 bnep,rfcomm
bluetooth 36335 6 sco,bnep,rfcomm,l2cap
cpufreq_userspace 1488 0
cpufreq_conservative 4018 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
nfsd 194111 11
lockd 49481 1 nfsd
nfs_acl 1695 1 nfsd
auth_rpcgss 25284 1 nfsd
sunrpc 134944 10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 2626 1 nfsd
fuse 44304 1
ext2 46277 1
coretemp 3401 0
acpi_cpufreq 4959 1
loop 9773 0
snd_hda_codec_realtek 163306 1
rt2870sta 326811 0
snd_hda_intel 16831 0
arc4 974 2
snd_usb_audio 50678 0
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_usb_lib 11200 1 snd_usb_audio
ecb 1405 2
snd_seq_midi 3576 0
rt2800usb 24927 0
snd_pcm 47226 3 snd_hda_intel,snd_usb_audio,snd_hda_codec
psmouse 44817 0
uvcvideo 45526 0
snd_seq_midi_event 3684 1 snd_seq_midi
rt2x00usb 5729 1 rt2800usb
snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi
snd_seq 35495 2 snd_seq_midi,snd_seq_midi_event
rt2x00lib 19109 2 rt2800usb,rt2x00usb
mac80211 123746 2 rt2x00usb,rt2x00lib
snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec
cfg80211 87797 2 rt2x00lib,mac80211
rfkill 10280 3 bluetooth,cfg80211
snd_timer 12258 2 snd_pcm,snd_seq
videodev 25569 1 uvcvideo
crc_ccitt 1039 2 rt2870sta,rt2800usb
i2c_isch 2690 0
v4l1_compat 10250 2 uvcvideo,videodev
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
serio_raw 2916 0
i2c_core 12795 2 videodev,i2c_isch
cdc_acm 12582 0
evdev 5609 2
pcspkr 1207 0
snd 34431 10
snd_hda_codec_realtek,snd_hda_intel,snd_usb_audio, snd_hda_codec,snd_pcm,snd_rawmidi,snd_seq,snd_hwde p,snd_timer,snd_seq_device
soundcore 3450 1 snd
video 14605 0
button 3598 0
ac 1640 0
snd_page_alloc 5061 2 snd_hda_intel,snd_pcm
battery 3782 0
output 1204 1 video
processor 26343 3 acpi_cpufreq
usbhid 28040 0
hid 50925 1 usbhid
ext4 256968 1
mbcache 3762 2 ext2,ext4
jbd2 56219 1 ext4
crc16 1027 2 l2cap,ext4
sd_mod 26021 4
crc_t10dif 1012 1 sd_mod
ata_generic 2247 0
pata_sch 1546 4
uhci_hcd 16073 0
thermal 9206 0
r8168 137847 0
sdhci_pci 4589 0
sdhci 12187 1 sdhci_pci
libata 115913 2 ata_generic,pata_sch
thermal_sys 9378 3 video,processor,thermal
ehci_hcd 28749 0
r8169 25294 0
mii 2714 1 r8169
mmc_core 38781 1 sdhci
led_class 1757 2 rt2x00lib,sdhci
scsi_mod 104889 2 sd_mod,libata
usbcore 98865 11
rt2870sta,snd_usb_audio,snd_usb_lib,rt2800usb,uvcv ideo,rt2x00usb,cdc_acm,usbhid,uhci_hcd,ehci_hcd
nls_base 4541 3 isofs,udf,usbcore

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
#iface eth0 inet dhcp
iface eth0 inet static
address 192.168.178.13
netmask 255.255.255.0
network 192.168.178.0
broadcast 192.168.178.255
gateway 192.168.178.1
up ip -6 addr add 2001:4dd0:f934:1000:201:c0ff:fe08:aa31/64 dev eth0
# dns-* options are implemented by the resolvconf package, if
installed
#dns-nameservers 192.168.178.1
#dns-search gkehrer.local


** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 00:01:c0:08:aa:31 brd ff:ff:ff:ff:ff:ff
inet 192.168.178.13/24 brd 192.168.178.255 scope global eth0
inet6 2001:xxxx:xxxx:xxxx:201:c0ff:fe08:aa31/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::201:c0ff:fe08:aa31/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:01:c0:08:aa:32 brd ff:ff:ff:ff:ff:ff
4: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:0d:f0:95:86:b4 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/24 brd 192.168.1.255 scope global wlan0
5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 2e:61:60:3e:bc:1e brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed
multicast|bytes packets errs drop fifo colls carrier compressed
lo: 27504 342 0 0 0 0 0 0
27504 342 0 0 0 0 0 0
eth0:12385839 32654 0 0 0 0 0 0
5972630 31301 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0
30750 147 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0

*** Protocol statistics:
Ip:
27679 total packets received
0 forwarded
0 incoming packets discarded
27667 incoming packets delivered
30799 requests sent out
Icmp:
179 ICMP messages received
76 input ICMP message failed.
ICMP input histogram:
destination unreachable: 97
echo requests: 79
echo replies: 3
103 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 97
echo request: 3
echo replies: 3
IcmpMsg:
InType0: 3
InType3: 97
InType8: 79
OutType0: 3
OutType3: 97
OutType8: 3
Tcp:
15 active connections openings
10 passive connection openings
1 failed connection attempts
6 connection resets received
3 connections established
26177 segments received
29995 segments send out
2 segments retransmited
0 bad segments received.
350 resets sent
Udp:
1010 packets received
77 packets to unknown port received.
0 packet receive errors
568 packets sent
UdpLite:
TcpExt:
4 TCP sockets finished time wait in fast timer
116 delayed acks sent
3 packets directly queued to recvmsg prequeue.
3 bytes directly received in process context from prequeue
6187 packet headers predicted
15428 acknowledgments not containing data payload received
200 predicted acknowledgments
2 other TCP timeouts
11 DSACKs sent for old packets
2 DSACKs received
2 connections reset due to unexpected data
TCPDSACKIgnoredOld: 2
IpExt:
InMcastPkts: 309
OutMcastPkts: 243
InBcastPkts: 919
OutBcastPkts: 198
InOctets: 11708859
OutOctets: 5528113
InMcastOctets: 19965
OutMcastOctets: 16537
InBcastOctets: 307676
OutBcastOctets: 37580

*** Device features:
eth0: 0x180
eth1: 0x180
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH
Poulsbo) [8086:8100] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:02.0 VGA compatible controller [0300]: Intel Corporation System
Controller Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07)
(prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 0: Memory at d8080000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
Region 3: Memory at d8020000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Vendor Specific Information: Len=07 <?>
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000

00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub
(SCH Poulsbo) HD Audio Controller [8086:811b] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d8010000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Express (v1) Root Complex Integrated
Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s Enabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00
AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 0000000000000000
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 1 [8086:8110] (rev 07) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d8100000-d81fffff
Prefetchable memory behind bridge: d8500000-d85fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
ClockPM+ Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [90] Subsystem: Intel Corporation Device [8086:8119]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 2 [8086:8112] (rev 07) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d8200000-d82fffff
Prefetchable memory behind bridge: d8600000-d86fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
ClockPM+ Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #3, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [90] Subsystem: Intel Corporation Device [8086:8119]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB UHCI #1 [8086:8114] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB UHCI #2 [8086:8115] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB UHCI #3 [8086:8116] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB EHCI #1 [8086:8117] (rev 07) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 0: Memory at d8014000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd

00:1e.0 SD Host controller [0805]: Intel Corporation System Controller
Hub (SCH Poulsbo) SDIO Controller #1 [8086:811c] (rev 07) (prog-if 01)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d8014400 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: sdhci-pci

00:1e.1 SD Host controller [0805]: Intel Corporation System Controller
Hub (SCH Poulsbo) SDIO Controller #2 [8086:811d] (rev 07) (prog-if 01)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 0: Memory at d8014800 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: sdhci-pci

00:1e.2 SD Host controller [0805]: Intel Corporation System Controller
Hub (SCH Poulsbo) SDIO Controller #3 [8086:811e] (rev 07) (prog-if 01)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d8014c00 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: sdhci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH
Poulsbo) LPC Bridge [8086:8119] (rev 07)
Subsystem: Intel Corporation System Controller Hub (SCH Poulsbo)
LPC Bridge [8086:8119]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: isch_smbus

00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub
(SCH Poulsbo) IDE Controller [8086:811a] (rev 07) (prog-if 80 [Master])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: pata_sch

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at d8100000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at d8500000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at d8520000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4159
Capabilities: [70] Express (v1) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 05, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 36-12-26-00-68-4c-e0-00
Kernel driver in use: r8169

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at d8200000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at d8600000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at d8620000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4161
Capabilities: [70] Express (v1) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 05, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 36-12-26-00-68-4c-e0-00
Kernel driver in use: r8169


** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 012: ID 03eb:204b Atmel Corp. LUFA USB to Serial Adapter
Project
Bus 001 Device 011: ID 177f:0060 Sweex
Bus 001 Device 010: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 009: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 008: ID 0557:2213 ATEN International Co., Ltd
Bus 001 Device 004: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070
Wireless Adapter
Bus 001 Device 003: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration
management sy
ii initramfs-tools [linux 0.98.8 tools for generating an
initramfs
ii linux-base 2.6.32-35squeeze2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux
kernel mo

Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-10 Embedded GNU C Library:
Shared lib

Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.28 Binary firmware for Ralink
wireles
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4E7F4D45.7040902@wolke7.net">http://lists.debian.org/4E7F4D45.7040902@wolke7.net

Ben Hutchings 09-25-2011 07:23 PM

Bug#642911: linux-image-2.6.32-5-686: Network connection fails under heavy load.
 
Please test version 2.6.32-36 from stable-proposed-updates.

Ben.

--
Ben Hutchings
If you seem to know what you are doing, you'll be given more to do.

09-28-2011 06:37 AM

Bug#642911: linux-image-2.6.32-5-686: Network connection fails under heavy load.
 
Ben Hutchings wrote:
> Please test version 2.6.32-36 from stable-proposed-updates.
>
> Ben.
>
>
Hi Ben,
I tested version 2.6.32-37. The network seems to be more stable, but I still
have connection timeouts. There are no more dmesg lines for "eth0: link
up" but my
ssh connection still terminates from time to time.

Do you need any more log files ?

Gerd.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4E82C0B5.1050902@wolke7.net">http://lists.debian.org/4E82C0B5.1050902@wolke7.net

Ben Hutchings 09-28-2011 11:56 PM

Bug#642911: linux-image-2.6.32-5-686: Network connection fails under heavy load.
 
On Wed, 2011-09-28 at 08:37 +0200, booster@wolke7.net wrote:
> Ben Hutchings wrote:
> > Please test version 2.6.32-36 from stable-proposed-updates.
> >
> > Ben.
> >
> >
> Hi Ben,
> I tested version 2.6.32-37. The network seems to be more stable, but I still
> have connection timeouts. There are no more dmesg lines for "eth0: link
> up" but my
> ssh connection still terminates from time to time.

So you still see "WARNING: at ... dev_watchdog"?

> Do you need any more log files ?

They may be helpful.

Ben.

--
Ben Hutchings
Everything should be made as simple as possible, but not simpler.
- Albert Einstein


All times are GMT. The time now is 09:40 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.