FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 07-14-2011, 10:12 PM
Paul Menzel
 
Default Bug#613979: "BUG: Unable to handle kernel paging request at ffffc90013cd8000" and no sound card recognized

Am Donnerstag, den 14.07.2011, 23:35 +0200 schrieb Svante Signell:
> On Thu, 2011-07-14 at 13:27 -0500, Jonathan Nieder wrote:

> > Takashi Iwai wrote:
> > >>> On Wed, 2011-03-30 at 15:13 +0200, Clemens Ladisch wrote:
> > >>>>>>>>> Svante Signell wrote:
> >
> > >>>>>>>>>> During boot of kernel 2.6.38 (and 2.6.37) udev bugs out:
> > >>>>>>>>>> Waiting for /dev to be fully populated
> > >>>>>>>>>> BUG: Unable to handle kernel paging request at ffffc90013cd8000
> > >>>>>>>>>> axz_probe+ ... [snd_hda_intel]
> > >>>>>>>>>> ...lots of output lost...
> > >>>>>>>>>> udevadm timeout 180 sec ...
> > >>>>>>>>>> udevd[390]: worker [439] failed while handling
> > >>>>>>>>>> '/devices/pci0000:80/0000:80:01.0'
> > >>>>>>>>>>
> > >>>>>>>>>> After the timeout the boot continues! Have not yet tested if sound is
> > >>>>>>>>>> functional.
> > [...]
> > >>>> This is the azx_readw(chip, GCAP) in azx_create(); chip->remap_addr is
> > >>>> 0xffffc90011c08000 which does look like a valid pointer, but isn't.
> > [...]
> > > The point where it Oops implies that the problem isn't in the sound
> > > driver but rather in a breakage in a deeper level, either PCI core,
> > > x86 mm or ACPI/BIOS.
> > >
> > > Any chance to bisect the kernel?
> >
> > Svante bisected it to v2.6.34-rc1~218^2~27 (x86/pci: Use
> > resource_size_t in update_res, 2010-02-10) --- thanks. Which is
> > pretty weird, since I think phys_addr_t on an amd64 machine (and hence
> > resource_size_t) would be 64 bits, making that commit a no-op.

I just want to add that I experience this with an AMD 64-bit processor
but 32-bit userspace and linux-image-…-amd64 and -686-pae.

> > Svante, more questions (sorry):
> >
> > - could you try booting b74fd238a9cf and b74fd238a9cf^ again
> > (to make sure we haven't hit a heisenbug) and send the
> > corresponding full dmesg and .config files?
>
> I am very sorry but I don't have physical access to that box for a month
> from now.

Having the same I could do also some tests over the weekend. I only need
some instructions how to do that. Svante, could you please paste your
commands for generating your Linux kernel package.

[…]


Thanks,

Paul
 
Old 08-13-2011, 06:23 PM
Jonathan Nieder
 
Default Bug#613979: "BUG: Unable to handle kernel paging request at ffffc90013cd8000" and no sound card recognized

(Dropping upstream from the cc list. Please remember to reply
upthread when you want to reach them.)
Hi Paul,

Paul Menzel wrote:
> Am Donnerstag, den 14.07.2011, 23:35 +0200 schrieb Svante Signell:
>> On Thu, 2011-07-14 at 13:27 -0500, Jonathan Nieder wrote:

>>> - could you try booting b74fd238a9cf and b74fd238a9cf^ again
>>> (to make sure we haven't hit a heisenbug) and send the
>>> corresponding full dmesg and .config files?
>>
>> I am very sorry but I don't have physical access to that box for a month
>> from now.
>
> Having the same I could do also some tests over the weekend. I only need
> some instructions how to do that. Svante, could you please paste your
> commands for generating your Linux kernel package.

Here is one way:

# apt-get install git build-essential
$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
$ cd linux
$ git checkout b74fd238a9cf^
$ make localmodconfig; # minimal configuration
$ make deb-pkg; # can add -j<n> for parallel build
# dpkg -i ../<name of package>
# reboot
... test test test ...

$ cd ~/src/linux
$ git checkout b74fd238a9cf
$ make silentoldconfig; # reuse configuration
$ make deb-pkg
# dpkg -i ../<name of package>
# reboot

Some more details on building the kernel are at
http://kernel-handbook.alioth.debian.org/ and in the
debian-kernel-handbook package, though I wouldn't be surprised if
there are details missing (in which case bug reports would be
appreciated).

Thanks, and sorry for my slow response.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110813182309.GA7692@elie.gateway.2wire.net">http ://lists.debian.org/20110813182309.GA7692@elie.gateway.2wire.net
 
Old 08-13-2011, 10:19 PM
Paul Menzel
 
Default Bug#613979: "BUG: Unable to handle kernel paging request at ffffc90013cd8000" and no sound card recognized

Dear Jonathan,


Am Samstag, den 13.08.2011, 13:23 -0500 schrieb Jonathan Nieder:

> Paul Menzel wrote:
> > Am Donnerstag, den 14.07.2011, 23:35 +0200 schrieb Svante Signell:
> >> On Thu, 2011-07-14 at 13:27 -0500, Jonathan Nieder wrote:
>
> >>> - could you try booting b74fd238a9cf and b74fd238a9cf^ again
> >>> (to make sure we haven't hit a heisenbug) and send the
> >>> corresponding full dmesg and .config files?
> >>
> >> I am very sorry but I don't have physical access to that box for a month
> >> from now.
> >
> > Having the same I could do also some tests over the weekend. I only need
> > some instructions how to do that. Svante, could you please paste your
> > commands for generating your Linux kernel package.
>
> Here is one way:
>
> # apt-get install git build-essential
> $ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git

I had the sound tree (ALSA) already on my system and took that.

> $ cd linux
> $ git checkout b74fd238a9cf^
> $ make localmodconfig; # minimal configuration

`/boot/config-2.6.32-5-amd64` was used as the template for the
configuration. For new options I just chose the defaults. Please find my
config attached.

> $ make deb-pkg; # can add -j<n> for parallel build

`make -j2 deb-pkg` failed with the following error.

In file included from /opt/sound-2.6/arch/x86/include/asm/hardirq.h:5:0,
from include/linux/hardirq.h:10,
from include/linux/interrupt.h:12,
from include/linux/kernel_stat.h:8,
from /srv/filme/oe/sound-2.6/arch/x86/include/asm/i387.h:16,
from arch/x86/kernel/signal.c:26:
include/linux/irq.h: In function ‘alloc_desc_masks’:
include/linux/irq.h:439:8: warning: variable ‘gfp’ set but not used [-Wunused-but-set-variable]
AS arch/x86/kernel/entry_64.o
CC init/calibrate.o
/tmp/ccTMpQIL.s: Assembler messages:
/tmp/ccTMpQIL.s: Error: .size expression for do_hypervisor_callback does not evaluate to a constant
make[4]: *** [arch/x86/kernel/entry_64.o] Fehler 1
make[3]: *** [arch/x86/kernel] Fehler 2
make[2]: *** [arch/x86] Fehler 2

I get the same error without `-j2`. Please note that I am using a 32-bit
user space with a 64-bit Linux kernel.

$ dpkg --print-architecture
i386
$ uname -m
x86_64

> # dpkg -i ../<name of package>
> # reboot
> ... test test test ...

I will look more into that later on.

[…]

> Thanks, and sorry for my slow response.

Thank you very much for your help and your work on Debian.


Thanks,

Paul
 
Old 08-13-2011, 10:46 PM
Jonathan Nieder
 
Default Bug#613979: "BUG: Unable to handle kernel paging request at ffffc90013cd8000" and no sound card recognized

Paul Menzel wrote:

> `make -j2 deb-pkg` failed with the following error.
>
> In file included from /opt/sound-2.6/arch/x86/include/asm/hardirq.h:5:0,
> from include/linux/hardirq.h:10,
> from include/linux/interrupt.h:12,
> from include/linux/kernel_stat.h:8,
> from /srv/filme/oe/sound-2.6/arch/x86/include/asm/i387.h:16,
> from arch/x86/kernel/signal.c:26:
> include/linux/irq.h: In function ‘alloc_desc_masks’:
> include/linux/irq.h:439:8: warning: variable ‘gfp’ set but not used [-Wunused-but-set-variable]
> AS arch/x86/kernel/entry_64.o
> CC init/calibrate.o
> /tmp/ccTMpQIL.s: Assembler messages:
> /tmp/ccTMpQIL.s: Error: .size expression for do_hypervisor_callback does not evaluate to a constant
> make[4]: *** [arch/x86/kernel/entry_64.o] Fehler 1
> make[3]: *** [arch/x86/kernel] Fehler 2
> make[2]: *** [arch/x86] Fehler 2

Yep, I forgot about binutils bug#620448. If you put this script
somewhere before /usr/bin on your $PATH, make it executable, and name
it "as", that should work around it.

#!/bin/sh
exec /usr/bin/as --size-check=warning "$@"

If you're using gcc 4.6, the change from de2a8cf9 (e.g., grab it
using "git cherry-pick de2a8cf9") is also needed.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110813224634.GA18466@elie.gateway.2wire.net">htt p://lists.debian.org/20110813224634.GA18466@elie.gateway.2wire.net
 
Old 08-15-2011, 01:00 PM
Paul Menzel
 
Default Bug#613979: "BUG: Unable to handle kernel paging request at ffffc90013cd8000" and no sound card recognized

Dear folks,


Am Donnerstag, den 14.07.2011, 23:35 +0200 schrieb Svante Signell:
> On Thu, 2011-07-14 at 13:27 -0500, Jonathan Nieder wrote:

> > Takashi Iwai wrote:
> > >>> On Wed, 2011-03-30 at 15:13 +0200, Clemens Ladisch wrote:
> > >>>>>>>>> Svante Signell wrote:
> >
> > >>>>>>>>>> During boot of kernel 2.6.38 (and 2.6.37) udev bugs out:
> > >>>>>>>>>> Waiting for /dev to be fully populated
> > >>>>>>>>>> BUG: Unable to handle kernel paging request at ffffc90013cd8000
> > >>>>>>>>>> axz_probe+ ... [snd_hda_intel]
> > >>>>>>>>>> ...lots of output lost...
> > >>>>>>>>>> udevadm timeout 180 sec ...
> > >>>>>>>>>> udevd[390]: worker [439] failed while handling
> > >>>>>>>>>> '/devices/pci0000:80/0000:80:01.0'
> > >>>>>>>>>>
> > >>>>>>>>>> After the timeout the boot continues! Have not yet tested if sound is
> > >>>>>>>>>> functional.
> > [...]
> > >>>> This is the azx_readw(chip, GCAP) in azx_create(); chip->remap_addr is
> > >>>> 0xffffc90011c08000 which does look like a valid pointer, but isn't.
> > [...]
> > > The point where it Oops implies that the problem isn't in the sound
> > > driver but rather in a breakage in a deeper level, either PCI core,
> > > x86 mm or ACPI/BIOS.
> > >
> > > Any chance to bisect the kernel?
> >
> > Svante bisected it to v2.6.34-rc1~218^2~27 (x86/pci: Use
> > resource_size_t in update_res, 2010-02-10) --- thanks. Which is
> > pretty weird, since I think phys_addr_t on an amd64 machine (and hence
> > resource_size_t) would be 64 bits, making that commit a no-op.
> >
> > Svante, more questions (sorry):
> >
> > - could you try booting b74fd238a9cf and b74fd238a9cf^ again
> > (to make sure we haven't hit a heisenbug) and send the
> > corresponding full dmesg and .config files?
>
> I am very sorry but I don't have physical access to that box for a month
> from now. However, something that might be more interesting is the
> output of the second-to last message that was concerning
> x86/pci/amd/.... I might get help to find that message in a few days.

thanks to Jonathan’s help I was able to perform the bisection.

$ git bisect start 0f2cc4ecd81dc1917a041dc93db0ada28f8356fa 8724fdb53d27d7b59b60c8a399cc67f9abfabb33
[…]
$ git bisect log
# bad: [0f2cc4ecd81dc1917a041dc93db0ada28f8356fa] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
# good: [8724fdb53d27d7b59b60c8a399cc67f9abfabb33] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
git bisect start '0f2cc4ecd81dc1917a041dc93db0ada28f8356fa' '8724fdb53d27d7b59b60c8a399cc67f9abfabb33'
# good: [14f3ad6f4a12495b32b0dd743bc7179f36658208] ipv6: Use 1280 as min MTU for ipv6 forwarding
git bisect good 14f3ad6f4a12495b32b0dd743bc7179f36658208
# good: [60f8a8d4c6c46bb080e8e65d30be31b172a39a78] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
git bisect good 60f8a8d4c6c46bb080e8e65d30be31b172a39a78
# bad: [7f5b09c15ab989ed5ce4adda0be42c1302df70b7] Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
git bisect bad 7f5b09c15ab989ed5ce4adda0be42c1302df70b7
# good: [9f445cb29918dc488b7a9a92ef018599cce33df7] USB: musb: disable double buffering for older RTL versions
git bisect good 9f445cb29918dc488b7a9a92ef018599cce33df7
# bad: [fb7b096d949fa852442ed9d8f982bce526ccfe7e] Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
git bisect bad fb7b096d949fa852442ed9d8f982bce526ccfe7e
# bad: [dce46a04d55d6358d2d4ab44a4946a19f9425fe2] early_res: Need to save the allocation name in drop_range_partial()
git bisect bad dce46a04d55d6358d2d4ab44a4946a19f9425fe2
# bad: [c252a5bb1f57afb1e336d68085217727ca7b2134] x86: Only call dma32_reserve_bootmem 64bit !CONFIG_NUMA
git bisect bad c252a5bb1f57afb1e336d68085217727ca7b2134
# bad: [9ad3f2c7c69659c343843393944d739fec1f2e73] x86/pci: Add cap_resource()
git bisect bad 9ad3f2c7c69659c343843393944d739fec1f2e73
# good: [27811d8cabe56e0c3622251b049086f49face4ff] x86: Move range related operation to one file
git bisect good 27811d8cabe56e0c3622251b049086f49face4ff
# bad: [3e3da00c01d050307e753fb7b3e84aefc16da0d0] x86/pci: AMD one chain system to use pci read out res
git bisect bad 3e3da00c01d050307e753fb7b3e84aefc16da0d0

and `git bisect` showed me the same faulty commit as Svante found out:
b74fd238 [2].

commit b74fd238a9cf39a81d94152f375b756bf795b4af
Author: Yinghai Lu <yinghai@kernel.org>
Date: Wed Feb 10 01:20:08 2010 -0800

x86/pci: Use resource_size_t in update_res

(Is there a command to show that summary again? I could not find it in
the help.)

But I before started with the bisection I tried what Jonathan asked
Svante to do and b74fd238a9cf and b74fd238a9cf^ did not show these
problems. Additionally it is weird that I never had to test that commit
b74fd238 in that bisection run.

I will test it again¹ and rebuild it and report back. But I would
suspect 3e3da00c [2] as the culprit.

commit 3e3da00c01d050307e753fb7b3e84aefc16da0d0
Author: Yinghai Lu <yinghai@kernel.org>
Date: Wed Feb 10 01:20:09 2010 -0800

x86/pci: AMD one chain system to use pci read out res

`make` should take care of all necessary recompilations I guess, so no
`make clean`(?) is required.


Thanks,

Paul


¹ It would be nice if the SHA1 checksum of the commit could be
incorporated in the Debian package somehow.


[1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b74fd238a9cf39a81d94152f375b756 bf795b4af
[2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3e3da00c01d050307e753fb7b3e84ae fc16da0d0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.33-rc7 (paul@mattotaupa) (gcc version 4.6.1 (Debian 4.6.1-6) ) #24 SMP Mon Aug 15 14:05:42 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.33-rc7 root=/dev/mapper/speicher-root ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
[ 0.000000] BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e9c20 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077fb0000 (usable)
[ 0.000000] BIOS-e820: 0000000077fb0000 - 0000000077fbe000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000077fbe000 - 0000000077fe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077fe0000 - 0000000078000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ c8000000 old size 32 MB
[ 0.000000] Aperture from AGP @ c8000000 size 128 MB (APSIZE f20)
[ 0.000000] last_pfn = 0x77fb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 base 0060000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0070000000 mask FFF8000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-0000000077fb0000
[ 0.000000] 0000000000 - 0077e00000 page 2M
[ 0.000000] 0077e00000 - 0077fb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 77fb0000 @ 16000-1a000
[ 0.000000] RAMDISK: 37718000 - 37b83755
[ 0.000000] ACPI: RSDP 00000000000fa8b0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0000000077fb0100 0005C (v01 103007 XSDT1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: FACP 0000000077fb0290 000F4 (v03 103007 FACP1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0000000077fb0490 0547E (v01 A0692 A0692000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0000000077fbe000 00040
[ 0.000000] ACPI: APIC 0000000077fb0390 00068 (v01 103007 APIC1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0000000077fb0400 0003C (v01 103007 OEMMCFG 20071030 MSFT 00000097)
[ 0.000000] ACPI: WDRT 0000000077fb0440 00047 (v01 103007 VT-8237S 20071030 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0000000077fbe040 00075 (v01 103007 OEMB1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: HPET 0000000077fb5910 00038 (v01 103007 VT-8237S 20071030 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0000000077fb5950 00206 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000077fb0000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000077fb0000
[ 0.000000] NODE_DATA [0000000000018000 - 0000000000020fff]
[ 0.000000] bootmap [0000000000021000 - 000000000002fff7] pages f
[ 0.000000] (12 early reservations) ==> bootmem [0000000000 - 0077fb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 00018579c4] TEXT DATA BSS ==> [0001000000 - 00018579c4]
[ 0.000000] #2 [0037718000 - 0037b83755] RAMDISK ==> [0037718000 - 0037b83755]
[ 0.000000] #3 [0001858000 - 0001858290] BRK ==> [0001858000 - 0001858290]
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
[ 0.000000] #6 [000009b000 - 00000f0f40] BIOS reserved ==> [000009b000 - 00000f0f40]
[ 0.000000] #7 [00000f1094 - 00000ff780] BIOS reserved ==> [00000f1094 - 00000ff780]
[ 0.000000] #8 [00000f0f40 - 00000f1094] MP-table mpc ==> [00000f0f40 - 00000f1094]
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
[ 0.000000] #11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x00077fb0
[ 0.000000] On node 0 totalpages: 491323
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3815 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6663 pages used for memmap
[ 0.000000] DMA32 zone: 480681 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ea000
[ 0.000000] PM: Registered nosave memory: 00000000000ea000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 78000000 (gap: 78000000:86c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001a00000 s90456 r8192 d24232 u1048576
[ 0.000000] pcpu-alloc: s90456 r8192 d24232 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 484496
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.33-rc7 root=/dev/mapper/speicher-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ c8000000 old size 32 MB
[ 0.000000] Aperture from AGP @ c8000000 size 128 MB (APSIZE f20)
[ 0.000000] Node 0: aperture @ c8000000 size 128 MB
[ 0.000000] Memory: 1923116k/1965760k available (2889k kernel code, 468k absent, 42176k reserved, 3911k data, 632k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2101.245 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4202.49 BogoMIPS (lpj=8404980)
[ 0.004040] Security Framework initialized
[ 0.004046] SELinux: Disabled at boot.
[ 0.004227] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005480] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.006035] Mount-cache hash table entries: 256
[ 0.006212] Initializing cgroup subsys ns
[ 0.006216] Initializing cgroup subsys cpuacct
[ 0.006221] Initializing cgroup subsys devices
[ 0.006224] Initializing cgroup subsys freezer
[ 0.006226] Initializing cgroup subsys net_cls
[ 0.006253] tseg: 0000000000
[ 0.006279] CPU: Physical Processor ID: 0
[ 0.006281] CPU: Processor Core ID: 0
[ 0.006285] mce: CPU supports 5 MCE banks
[ 0.006297] using C1E aware idle routine
[ 0.006299] Performance Events: AMD PMU driver.
[ 0.006305] ... version: 0
[ 0.006307] ... bit width: 48
[ 0.006309] ... generic registers: 4
[ 0.006311] ... value mask: 0000ffffffffffff
[ 0.006313] ... max period: 00007fffffffffff
[ 0.006315] ... fixed-purpose events: 0
[ 0.006317] ... event mask: 000000000000000f
[ 0.006610] ACPI: Core revision 20091214
[ 0.016068] Setting APIC routing to flat
[ 0.016463] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.058872] CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 02
[ 0.060000] Booting Node 0, Processors #1 Ok.
[ 0.144034] Brought up 2 CPUs
[ 0.144037] Total of 2 processors activated (8405.00 BogoMIPS).
[ 0.144307] devtmpfs: initialized
[ 0.144307] regulator: core version 0.5
[ 0.144307] NET: Registered protocol family 16
[ 0.144307] node 0 link 0: io port [1000, ffffff]
[ 0.144307] TOM: 0000000080000000 aka 2048M
[ 0.144307] node 0 link 0: mmio [e0000000, efffffff]
[ 0.144307] node 0 link 0: mmio [c8000000, cfffffff]
[ 0.144307] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.144307] node 0 link 0: mmio [fa000000, faffffff]
[ 0.144307] node 0 link 0: mmio [a0000, bffff]
[ 0.144307] node 0 link 0: mmio [80000000, ffffffff]
[ 0.144307] bus: [00, ff] on node 0 link 0
[ 0.144307] bus: 00 index 0 io port: [0, ffff]
[ 0.144307] bus: 00 index 1 mmio: [80000000, fcffffffff]
[ 0.144307] bus: 00 index 2 mmio: [c8000000, cfffffff]
[ 0.144307] bus: 00 index 3 mmio: [fa000000, faffffff]
[ 0.144307] bus: 00 index 4 mmio: [a0000, bffff]
[ 0.144307] ACPI: bus type pci registered
[ 0.144307] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.144307] PCI: not using MMCONFIG
[ 0.144307] PCI: Using configuration type 1 for base access
[ 0.144672] bio: create slab <bio-0> at 0
[ 0.144962] ACPI: EC: Look up EC in DSDT
[ 0.151894] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.157348] ACPI: Interpreter enabled
[ 0.157353] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.157379] ACPI: Using IOAPIC for interrupt routing
[ 0.157433] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.164035] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.192744] ACPI Warning: Incorrect checksum in table [OEMB] - ED, should be E8 (20091214/tbutils-314)
[ 0.192899] ACPI: No dock devices found.
[ 0.193057] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.193087] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 0.193369] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.193372] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.193375] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.193378] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.193382] pci_root PNP0A03:00: host bridge window [mem 0x78000000-0xdfffffff] (ignored)
[ 0.193385] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbefffff] (ignored)
[ 0.193417] pci 0000:00:00.0: reg 10: [mem 0xc8000000-0xcfffffff pref]
[ 0.193874] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.193879] pci 0000:00:02.0: PME# disabled
[ 0.193957] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.193961] pci 0000:00:03.0: PME# disabled
[ 0.194012] pci 0000:00:0f.0: reg 10: [io 0xec00-0xec07]
[ 0.194019] pci 0000:00:0f.0: reg 14: [io 0xe880-0xe883]
[ 0.194026] pci 0000:00:0f.0: reg 18: [io 0xe800-0xe807]
[ 0.194032] pci 0000:00:0f.0: reg 1c: [io 0xe480-0xe483]
[ 0.194039] pci 0000:00:0f.0: reg 20: [io 0xe400-0xe40f]
[ 0.194045] pci 0000:00:0f.0: reg 24: [io 0xe000-0xe0ff]
[ 0.194110] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.194184] pci 0000:00:10.0: reg 20: [io 0xd480-0xd49f]
[ 0.194208] pci 0000:00:10.0: supports D1 D2
[ 0.194211] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194215] pci 0000:00:10.0: PME# disabled
[ 0.194258] pci 0000:00:10.1: reg 20: [io 0xd800-0xd81f]
[ 0.194282] pci 0000:00:10.1: supports D1 D2
[ 0.194284] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194289] pci 0000:00:10.1: PME# disabled
[ 0.194331] pci 0000:00:10.2: reg 20: [io 0xd880-0xd89f]
[ 0.194355] pci 0000:00:10.2: supports D1 D2
[ 0.194358] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194362] pci 0000:00:10.2: PME# disabled
[ 0.194574] pci 0000:00:10.3: reg 20: [io 0xdc00-0xdc1f]
[ 0.194598] pci 0000:00:10.3: supports D1 D2
[ 0.194601] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194605] pci 0000:00:10.3: PME# disabled
[ 0.194637] pci 0000:00:10.4: reg 10: [mem 0xf9fffc00-0xf9fffcff]
[ 0.194680] pci 0000:00:10.4: supports D1 D2
[ 0.194683] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194687] pci 0000:00:10.4: PME# disabled
[ 0.194845] pci 0000:00:12.0: reg 10: [io 0xd000-0xd0ff]
[ 0.194852] pci 0000:00:12.0: reg 14: [mem 0xf9fff800-0xf9fff8ff]
[ 0.194889] pci 0000:00:12.0: supports D1 D2
[ 0.194891] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194896] pci 0000:00:12.0: PME# disabled
[ 0.195097] PCI: peer root bus 00 res updated from pci conf
[ 0.195129] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.195135] pci 0000:01:00.0: reg 14: [mem 0xfa000000-0xfaffffff]
[ 0.195154] pci 0000:01:00.0: reg 30: [mem 0xfbef0000-0xfbefffff pref]
[ 0.195171] pci 0000:01:00.0: supports D1 D2
[ 0.195208] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.195214] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff]
[ 0.195219] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.195264] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.195318] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.195371] pci 0000:00:13.1: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.195400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.195578] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.195623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.195736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.195780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.195843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[ 0.215377] ACPI: PCI Root Bridge [PCI1] (0000:20)
[ 0.215406] pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 0.215752] pci_root PNP0A08:00: host bridge window [mem 0xfbf00000-0xfbffffff] (ignored)
[ 0.215780] pci 0000:20:01.0: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
[ 0.215817] pci 0000:20:01.0: PME# supported from D0 D3hot D3cold
[ 0.215821] pci 0000:20:01.0: PME# disabled
[ 0.215867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.216248] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.216364] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.216477] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.216594] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.216707] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.216829] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.216951] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.217072] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.217213] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.217217] vgaarb: loaded
[ 0.217276] PCI: Using ACPI for IRQ routing
[ 0.217276] PCI: pci_cache_line_size set to 64 bytes
[ 0.217276] pci 0000:00:01.0: address space collision: [mem 0xfa000000-0xfbefffff] already in use
[ 0.217276] pci 0000:00:01.0: can't reserve window [mem 0xfa000000-0xfbefffff]
[ 0.217276] pci 0000:00:00.0: address space collision: [mem 0xc8000000-0xcfffffff pref] already in use
[ 0.217276] pci 0000:00:00.0: can't reserve [mem 0xc8000000-0xcfffffff pref]
[ 0.217276] pci 0000:01:00.0: no compatible bridge window for [mem 0xfa000000-0xfaffffff]
[ 0.217276] pci 0000:01:00.0: can't reserve [mem 0xfa000000-0xfaffffff]
[ 0.217276] pci 0000:20:01.0: address space collision: [mem 0xfbffc000-0xfbffffff 64bit] already in use
[ 0.217276] pci 0000:20:01.0: can't reserve [mem 0xfbffc000-0xfbffffff 64bit]
[ 0.217276] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.217276] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.217276] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.224012] Switching to clocksource hpet
[ 0.225405] pnp: PnP ACPI init
[ 0.225425] ACPI: bus type pnp registered
[ 0.231494] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.231500] pnp 00:0e: disabling [mem 0x000c0000-0x000bffff disabled] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.231504] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.231509] pnp 00:0e: disabling [mem 0x00100000-0x77ffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.231531] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[ 0.231536] pnp 00:0e: disabling [mem 0x000c0000-0x000bffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[ 0.231540] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[ 0.231544] pnp 00:0e: disabling [mem 0x00100000-0x77ffffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[ 0.232228] pnp: PnP ACPI: found 16 devices
[ 0.232231] ACPI: ACPI bus type pnp unregistered
[ 0.232248] system 00:05: [io 0x03e0-0x03e7] has been reserved
[ 0.232251] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.232254] system 00:05: [io 0x0800-0x087f] has been reserved
[ 0.232257] system 00:05: [io 0x0400-0x041f] has been reserved
[ 0.232262] system 00:05: [mem 0xfecc0000-0xfecc0fff] could not be reserved
[ 0.232265] system 00:05: [mem 0xfed02000-0xfed02fff] has been reserved
[ 0.232274] system 00:09: [io 0x0c00-0x0c0f] has been reserved
[ 0.232277] system 00:09: [io 0x0d00-0x0d0f] has been reserved
[ 0.232280] system 00:09: [io 0x0a20-0x0a2f] has been reserved
[ 0.232284] system 00:09: [io 0x0a30-0x0a3f] has been reserved
[ 0.232290] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.232294] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.232297] system 00:0c: [mem 0x78000000-0x7fffffff] has been reserved
[ 0.232303] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.232308] system 00:0e: [mem 0xfc000000-0xffffffff] could not be reserved
[ 0.237057] pci 0000:01:00.0: no compatible bridge window for [mem 0xfbef0000-0xfbefffff pref]
[ 0.237150] pci 0000:00:01.0: BAR 14: assigned [mem 0x80000000-0x817fffff]
[ 0.237154] pci 0000:00:02.0: BAR 14: assigned [mem 0x81800000-0x819fffff]
[ 0.237157] pci 0000:00:02.0: BAR 15: assigned [mem 0x81a00000-0x81bfffff 64bit pref]
[ 0.237160] pci 0000:00:03.0: BAR 14: assigned [mem 0x81c00000-0x81dfffff]
[ 0.237164] pci 0000:00:03.0: BAR 15: assigned [mem 0x81e00000-0x81ffffff 64bit pref]
[ 0.237168] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.237171] pci 0000:00:03.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.237175] pci 0000:01:00.0: BAR 1: assigned [mem 0x80000000-0x80ffffff]
[ 0.237180] pci 0000:01:00.0: BAR 1: set to [mem 0x80000000-0x80ffffff] (PCI address [0x80000000-0x80ffffff]
[ 0.237184] pci 0000:01:00.0: BAR 6: assigned [mem 0x81000000-0x8100ffff pref]
[ 0.237187] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.237189] pci 0000:00:01.0: bridge window [io disabled]
[ 0.237195] pci 0000:00:01.0: bridge window [mem 0x80000000-0x817fffff]
[ 0.237199] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.237205] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.237209] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 0.237215] pci 0000:00:02.0: bridge window [mem 0x81800000-0x819fffff]
[ 0.237220] pci 0000:00:02.0: bridge window [mem 0x81a00000-0x81bfffff 64bit pref]
[ 0.237227] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.237230] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.237236] pci 0000:00:03.0: bridge window [mem 0x81c00000-0x81dfffff]
[ 0.237241] pci 0000:00:03.0: bridge window [mem 0x81e00000-0x81ffffff 64bit pref]
[ 0.237248] pci 0000:00:13.1: PCI bridge to [bus 04-04]
[ 0.237250] pci 0000:00:13.1: bridge window [io disabled]
[ 0.237255] pci 0000:00:13.1: bridge window [mem disabled]
[ 0.237259] pci 0000:00:13.1: bridge window [mem pref disabled]
[ 0.237274] pci 0000:00:01.0: setting latency timer to 64
[ 0.237283] pci 0000:00:02.0: enabling device (0104 -> 0107)
[ 0.237289] alloc irq_desc for 27 on node 0
[ 0.237291] alloc kstat_irqs on node 0
[ 0.237298] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.237302] pci 0000:00:02.0: setting latency timer to 64
[ 0.237310] pci 0000:00:03.0: enabling device (0104 -> 0107)
[ 0.237315] alloc irq_desc for 31 on node 0
[ 0.237317] alloc kstat_irqs on node 0
[ 0.237321] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 0.237325] pci 0000:00:03.0: setting latency timer to 64
[ 0.237332] pci 0000:00:13.1: setting latency timer to 64
[ 0.237337] pci 0000:20:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit]
[ 0.237344] pci 0000:20:01.0: BAR 0: set to [mem 0xfd00000000-0xfd00003fff 64bit] (PCI address [0xfd00000000-0xfd00003fff]
[ 0.237348] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.237350] pci_bus 0000:00: resource 1 [mem 0x80000000-0xfcffffffff]
[ 0.237353] pci_bus 0000:00: resource 2 [mem 0xc8000000-0xcfffffff]
[ 0.237356] pci_bus 0000:00: resource 3 [mem 0xfa000000-0xfaffffff]
[ 0.237359] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.237362] pci_bus 0000:01: resource 1 [mem 0x80000000-0x817fffff]
[ 0.237365] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[ 0.237368] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.237370] pci_bus 0000:02: resource 1 [mem 0x81800000-0x819fffff]
[ 0.237373] pci_bus 0000:02: resource 2 [mem 0x81a00000-0x81bfffff 64bit pref]
[ 0.237376] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.237379] pci_bus 0000:03: resource 1 [mem 0x81c00000-0x81dfffff]
[ 0.237382] pci_bus 0000:03: resource 2 [mem 0x81e00000-0x81ffffff 64bit pref]
[ 0.237385] pci_bus 0000:04: resource 3 [io 0x0000-0xffff]
[ 0.237388] pci_bus 0000:04: resource 4 [mem 0x80000000-0xfcffffffff]
[ 0.237391] pci_bus 0000:04: resource 5 [mem 0xc8000000-0xcfffffff]
[ 0.237393] pci_bus 0000:04: resource 6 [mem 0xfa000000-0xfaffffff]
[ 0.237396] pci_bus 0000:04: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.237399] pci_bus 0000:20: resource 0 [io 0x0000-0xffff]
[ 0.237402] pci_bus 0000:20: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.237436] NET: Registered protocol family 2
[ 0.237543] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.238667] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.240960] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.241549] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.241552] TCP reno registered
[ 0.241565] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.241595] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.241723] NET: Registered protocol family 1
[ 0.241736] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.241759] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.241870] pci 0000:01:00.0: Boot video device
[ 0.241876] PCI: CLS 64 bytes, default 64
[ 0.241949] Unpacking initramfs...
[ 0.360305] Freeing initrd memory: 4525k freed
[ 0.363318] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[ 0.368298] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xc8000000
[ 0.368703] audit: initializing netlink socket (disabled)
[ 0.368715] type=2000 audit(1313410136.368:1): initialized
[ 0.380445] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.382095] VFS: Disk quotas dquot_6.5.2
[ 0.382149] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.382235] msgmni has been set to 3764
[ 0.382484] alg: No test for stdrng (krng)
[ 0.382548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.382552] io scheduler noop registered
[ 0.382554] io scheduler deadline registered
[ 0.382617] io scheduler cfq registered (default)
[ 0.382802] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.382955] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.384823] Linux agpgart interface v0.103
[ 0.384888] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.384991] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.385308] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.385502] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.385557] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x0,0x0 irq 12
[ 0.385560] PNP: PS/2 controller has invalid data port 0x0; using default 0x60
[ 0.385562] PNP: PS/2 controller has invalid command port 0x0; using default 0x64
[ 0.385565] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.386017] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.386025] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.386111] mice: PS/2 mouse device common for all mice
[ 0.386150] rtc_cmos 00:08: RTC can wake from S4
[ 0.386195] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.386231] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.386244] cpuidle: using governor ladder
[ 0.386247] cpuidle: using governor menu
[ 0.386251] No iBFT detected.
[ 0.386519] TCP cubic registered
[ 0.386673] NET: Registered protocol family 10
[ 0.387117] lo: Disabled Privacy Extensions
[ 0.387353] Mobile IPv6
[ 0.387356] NET: Registered protocol family 17
[ 0.387448] PM: Resume from disk failed.
[ 0.387460] registered taskstats version 1
[ 0.387788] rtc_cmos 00:08: setting system clock to 2011-08-15 12:08:57 UTC (1313410137)
[ 0.387821] Initalizing network drop monitor service
[ 0.387861] Freeing unused kernel memory: 632k freed
[ 0.388276] Write protecting the kernel read-only data: 6144k
[ 0.388473] Freeing unused kernel memory: 1188k freed
[ 0.389301] Freeing unused kernel memory: 468k freed
[ 0.457762] <30>udevd[64]: starting version 172
[ 0.605598] SCSI subsystem initialized
[ 0.615459] usbcore: registered new interface driver usbfs
[ 0.615491] usbcore: registered new interface driver hub
[ 0.615903] usbcore: registered new device driver usb
[ 0.620078] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 0.620146] alloc irq_desc for 23 on node 0
[ 0.620149] alloc kstat_irqs on node 0
[ 0.620158] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.620532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.624825] eth0: VIA Rhine II at 0x1d000, 00:1e:8c:b9:4b:2a, IRQ 23.
[ 0.625539] eth0: MII PHY found at address 1, status 0x796d advertising 0de1 Link 45e1.
[ 0.625791] alloc irq_desc for 21 on node 0
[ 0.625794] alloc kstat_irqs on node 0
[ 0.625805] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.625832] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.625867] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 0.625906] ehci_hcd 0000:00:10.4: debug port 1
[ 0.625933] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9fffc00
[ 0.636015] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.636041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.636044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.636047] usb usb1: Product: EHCI Host Controller
[ 0.636049] usb usb1: Manufacturer: Linux 2.6.33-rc7 ehci_hcd
[ 0.636052] usb usb1: SerialNumber: 0000:00:10.4
[ 0.636175] hub 1-0:1.0: USB hub found
[ 0.636180] hub 1-0:1.0: 8 ports detected
[ 0.644477] libata version 3.00 loaded.
[ 0.649482] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.649687] pata_via 0000:00:0f.1: version 0.3.4
[ 0.649845] scsi0 : pata_via
[ 0.649968] scsi1 : pata_via
[ 0.652078] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.652081] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.652344] alloc irq_desc for 20 on node 0
[ 0.652347] alloc kstat_irqs on node 0
[ 0.652355] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.652365] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.652382] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.652419] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d480
[ 0.652472] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.652475] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.652478] usb usb2: Product: UHCI Host Controller
[ 0.652480] usb usb2: Manufacturer: Linux 2.6.33-rc7 uhci_hcd
[ 0.652482] usb usb2: SerialNumber: 0000:00:10.0
[ 0.652666] hub 2-0:1.0: USB hub found
[ 0.652679] hub 2-0:1.0: 2 ports detected
[ 0.652779] alloc irq_desc for 22 on node 0
[ 0.652781] alloc kstat_irqs on node 0
[ 0.652786] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.652794] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.652805] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.652835] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d800
[ 0.652876] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.652879] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.652881] usb usb3: Product: UHCI Host Controller
[ 0.652883] usb usb3: Manufacturer: Linux 2.6.33-rc7 uhci_hcd
[ 0.652886] usb usb3: SerialNumber: 0000:00:10.1
[ 0.653041] hub 3-0:1.0: USB hub found
[ 0.653046] hub 3-0:1.0: 2 ports detected
[ 0.653129] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.653136] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.653147] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 0.653168] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d880
[ 0.653212] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.653215] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.653217] usb usb4: Product: UHCI Host Controller
[ 0.653219] usb usb4: Manufacturer: Linux 2.6.33-rc7 uhci_hcd
[ 0.653222] usb usb4: SerialNumber: 0000:00:10.2
[ 0.653378] hub 4-0:1.0: USB hub found
[ 0.653383] hub 4-0:1.0: 2 ports detected
[ 0.653466] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.653473] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.653483] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 0.653516] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000dc00
[ 0.653562] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.653565] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.653568] usb usb5: Product: UHCI Host Controller
[ 0.653570] usb usb5: Manufacturer: Linux 2.6.33-rc7 uhci_hcd
[ 0.653572] usb usb5: SerialNumber: 0000:00:10.3
[ 0.653724] hub 5-0:1.0: USB hub found
[ 0.653729] hub 5-0:1.0: 2 ports detected
[ 0.701966] sata_via 0000:00:0f.0: version 2.4
[ 0.701980] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.702018] sata_via 0000:00:0f.0: routed to hard irq line 5
[ 0.702075] scsi2 : sata_via
[ 0.702171] scsi3 : sata_via
[ 0.703860] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 21
[ 0.703863] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 21
[ 0.816456] ata1.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33
[ 0.832339] ata1.00: configured for UDMA/33
[ 0.839865] scsi 0:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5
[ 0.904015] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.004381] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL12, max UDMA/33
[ 1.020253] ata2.00: configured for UDMA/33
[ 1.028996] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL12 PQ: 0 ANSI: 5
[ 1.232018] ata4: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[ 1.244015] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 1.396215] ata4.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100
[ 1.396219] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.404229] ata4.00: configured for UDMA/100
[ 1.404299] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-60M 51.0 PQ: 0 ANSI: 5
[ 1.423493] usb 2-1: New USB device found, idVendor=046d, idProduct=c312
[ 1.423498] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.423501] usb 2-1: Product: USB Multimedia Keyboard
[ 1.423504] usb 2-1: Manufacturer: LITEON Technology
[ 1.437967] usbcore: registered new interface driver hiddev
[ 1.452819] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input1
[ 1.452827] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.452832] Uniform CD-ROM driver Revision: 3.20
[ 1.452888] generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:10.0-1/input0
[ 1.452922] usbcore: registered new interface driver usbhid
[ 1.452924] usbhid: USB HID core driver
[ 1.452972] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.465160] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.465293] sr 1:0:0:0: Attached scsi CD-ROM sr1
[ 1.465723] sd 3:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.465727] sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 1.465781] sd 3:0:0:0: [sda] Write Protect is off
[ 1.465784] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.465808] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.466148] sda:
[ 1.470118] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.470183] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.470260] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.481871] sda1 sda2
[ 1.482122] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.664016] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 1.736674] md: raid1 personality registered for level 1
[ 1.740815] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffccc824) on /dev/sda2
[ 1.740979] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffccc844) on /dev/sda2
[ 1.742006] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffccc824) on /dev/sda1
[ 1.742152] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffccc844) on /dev/sda1
[ 1.743437] md: md0 stopped.
[ 1.744429] md: bind<sda1>
[ 1.746364] raid1: raid set md0 active with 1 out of 2 mirrors
[ 1.746391] md0: detected capacity change from 0 to 509804544
[ 1.747202] md0: unknown partition table
[ 1.811994] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffccc824) on /dev/sda2
[ 1.812157] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffccc844) on /dev/sda2
[ 1.813388] md: md1 stopped.
[ 1.814324] md: bind<sda2>
[ 1.815964] raid1: raid set md1 active with 1 out of 2 mirrors
[ 1.815992] md1: detected capacity change from 0 to 1999886286848
[ 1.817231] md1: unknown partition table
[ 1.827713] device-mapper: uevent: version 1.0.3
[ 1.827907] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
[ 1.833915] usb 3-2: New USB device found, idVendor=058f, idProduct=9254
[ 1.833919] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.833923] usb 3-2: Product: Generic USB Hub
[ 1.833925] usb 3-2: Manufacturer: ALCOR
[ 1.836975] hub 3-2:1.0: USB hub found
[ 1.838908] hub 3-2:1.0: 4 ports detected
[ 24.636018] PM: Starting manual resume from disk
[ 24.636023] PM: Resume from partition 253:2
[ 24.636026] PM: Checking hibernation image.
[ 24.637264] PM: Error -22 checking image file
[ 24.637266] PM: Resume from disk failed.
[ 24.673235] kjournald starting. Commit interval 5 seconds
[ 24.673246] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 26.090197] <30>udevd[484]: starting version 172
[ 26.435589] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 26.435601] ACPI: Sleep Button [SLPB]
[ 26.435671] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 26.435674] ACPI: Power Button [PWRB]
[ 26.435741] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 26.435745] ACPI: Power Button [PWRF]
[ 26.463030] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 26.486288] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.581907] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 26.657110] parport_pc 00:04: reported by Plug and Play ACPI
[ 26.657159] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 26.667851] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 26.702279] EDAC MC: Ver: 2.1.0 Aug 15 2011
[ 26.747803] EDAC amd64_edac: Ver: 3.3.0 Aug 15 2011
[ 26.747903] EDAC amd64: ECC is enabled by BIOS.
[ 26.747942] EDAC MC: Rev F or later detected
[ 26.747954] EDAC MC: DCT0 chip selects:
[ 26.747957] EDAC MC: 0: 1024MB 1: 1024MB
[ 26.747959] EDAC MC: 2: 0MB 3: 0MB
[ 26.747961] EDAC MC: 4: 0MB 5: 0MB
[ 26.747963] EDAC MC: 6: 0MB 7: 0MB
[ 26.748038] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[ 26.748070] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 27.561927] alloc irq_desc for 17 on node 0
[ 27.561931] alloc kstat_irqs on node 0
[ 27.561941] HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 27.562018] HDA Intel 0000:20:01.0: setting latency timer to 64
[ 27.562032] BUG: unable to handle kernel paging request at ffffc90011358000
[ 27.562179] IP: [<ffffffffa03bd241>] azx_probe+0x39a/0x80c [snd_hda_intel]
[ 27.562288] PGD 77812067 PUD 77813067 PMD 761cf067 PTE 800000fd00000173
[ 27.562516] Oops: 0009 [#1] SMP
[ 27.562655] last sysfs file: /sys/devices/pci0000:00/0000:00:0f.0/host3/target3:0:0/3:0:0:0/block/sda/sda1/alignment_offset
[ 27.562741] CPU 0
[ 27.562840] Pid: 794, comm: work_for_cpu Not tainted 2.6.33-rc7 #24 M2V-MX SE/System Product Name
[ 27.562913] RIP: 0010:[<ffffffffa03bd241>] [<ffffffffa03bd241>] azx_probe+0x39a/0x80c [snd_hda_intel]
[ 27.563032] RSP: 0018:ffff88007678de80 EFLAGS: 00010286
[ 27.563091] RAX: ffffc90011358000 RBX: ffff8800761dc200 RCX: 0000000000000004
[ 27.563152] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
[ 27.563214] RBP: ffff8800770da000 R08: 0000000000000000 R09: 0000000000000040
[ 27.563276] R10: 0000000000000008 R11: 0000000000000078 R12: ffff880075ef6000
[ 27.563337] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8800770da090
[ 27.563399] FS: 0000000000000000(0000) GS:ffff880001a00000(0000) knlGS:00000000f75b78d0
[ 27.563472] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 27.563531] CR2: ffffc90011358000 CR3: 00000000766f4000 CR4: 00000000000006f0
[ 27.563593] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 27.563654] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 27.563716] Process work_for_cpu (pid: 794, threadinfo ffff88007678c000, task ffff880075e93de0)
[ 27.563788] Stack:
[ 27.563843] 000000000000fae0 0000000000000004 ffff88007678dfd8 ffff880075ef6000
[ 27.564009] <0> ffff880075e95280 ffff880075ef3d50 ffffffff81053695 ffff880075ef3d50
[ 27.564009] <0> 0000000000000000 0000000000000000 0000000000000000 ffffffff81181977
[ 27.564604] Call Trace:
[ 27.564604] [<ffffffff81053695>] ? do_work_for_cpu+0x0/0x1b
[ 27.564604] [<ffffffff81181977>] ? local_pci_probe+0xf/0x13
[ 27.564604] [<ffffffff810536a0>] ? do_work_for_cpu+0xb/0x1b
[ 27.564604] [<ffffffff81056e5e>] ? kthread+0x72/0x7a
[ 27.564604] [<ffffffff810097a4>] ? kernel_thread_helper+0x4/0x10
[ 27.564604] [<ffffffff81056dec>] ? kthread+0x0/0x7a
[ 27.564604] [<ffffffff810097a0>] ? kernel_thread_helper+0x0/0x10
[ 27.564604] Code: a0 01 00 00 ef 31 f6 48 89 df e8 b5 eb ff ff 85 c0 0f ioctl32(mdadm:793): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff829a74) on /dev/sda1
[ 27.565275] 88 df ioctl32(mdadm:793): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff829a94) on /dev/sda1
[ 27.565275] 02 00 00 48 89 ef e8 87 1e dc e0 8b 7b 40 e8 fc 63 cc e0 48 8b 43 38 <66> 44 8b 30 8b 43 14 83 e8 02 83 f8 01 77 2c 31 d2 be 85 43 00
[ 27.565275] RIP [<ffffffffa03bd241>] azx_probe+0x39a/0x80c [snd_hda_intel]
[ 27.565275] RSP <ffff88007678de80>
[ 27.565275] CR2: ffffc90011358000
[ 27.565275] ---[ end trace 9938655e1c583b83 ]---
[ 27.589383] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 27.596660] ioctl32(mdadm:795): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(fff8eef4) on /dev/sda2
[ 27.596947] ioctl32(mdadm:795): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(fff8ef14) on /dev/sda2
[ 33.229518] EXT3-fs (dm-1): warning: maximal mount count reached, running e2fsck is recommended
[ 33.230019] EXT3-fs (dm-1): using internal journal
[ 33.808351] loop: module loaded
[ 33.917827] kvm: Nested Virtualization enabled
[ 34.096399] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-8
[ 34.100191] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-8
[ 34.136220] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-7
[ 34.140179] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-7
[ 34.204216] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-6
[ 34.208181] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-6
[ 34.244225] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-5
[ 34.248181] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-5
[ 34.284220] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-4
[ 34.288179] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-4
[ 34.324215] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-3
[ 34.328179] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-3
[ 34.352227] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-2
[ 34.356179] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-2
[ 34.420204] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-8
[ 34.424181] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-8
[ 34.444185] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-7
[ 34.448173] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-7
[ 34.468182] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-6
[ 34.472172] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-6
[ 34.492182] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-5
[ 34.496172] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-5
[ 34.516183] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-4
[ 34.520171] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-4
[ 34.540181] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-3
[ 34.544168] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-3
[ 34.568182] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16204) on /dev/dm-2
[ 34.572171] ioctl32(mdadm:1054): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffa16224) on /dev/dm-2
[ 35.625073] Adding 4194296k swap on /dev/mapper/speicher-swap. Priority:-1 extents:1 across:4194296k
[ 57.622338] fuse init (API version 7.13)
[ 57.811791] kjournald starting. Commit interval 5 seconds
[ 57.843887] EXT3-fs (md0): using internal journal
[ 57.844031] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 58.130551] kjournald starting. Commit interval 5 seconds
[ 58.194365] EXT3-fs (dm-6): using internal journal
[ 58.194509] EXT3-fs (dm-6): mounted filesystem with ordered data mode
[ 58.316703] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 58.318023] SGI XFS Quota Management subsystem
[ 58.381508] XFS mounting filesystem dm-7
[ 58.600070] Ending clean XFS mount for filesystem: dm-7
[ 58.715763] XFS mounting filesystem dm-8
[ 59.053867] Ending clean XFS mount for filesystem: dm-8
[ 59.108243] REISERFS (device dm-5): found reiserfs format "3.6" with standard journal
[ 59.108361] REISERFS (device dm-5): using ordered data mode
[ 59.115110] REISERFS (device dm-5): journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 59.116770] REISERFS (device dm-5): checking transaction log (dm-5)
[ 59.145236] REISERFS (device dm-5): Using r5 hash to sort names
[ 59.233284] kjournald starting. Commit interval 5 seconds
[ 59.233850] EXT3-fs (dm-3): using internal journal
[ 59.233994] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 59.277920] kjournald starting. Commit interval 5 seconds
[ 59.278280] EXT3-fs (dm-4): using internal journal
[ 59.278424] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 61.997931] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 processors (2 cpu cores) (version 2.20.00)
[ 61.998074] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xe
[ 61.998133] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xf
[ 61.998193] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x11
[ 61.998254] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x16
[ 62.504024] Clocksource tsc unstable (delta = -209106465 ns)
[ 95.244544] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 97.277708] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 97.394239] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 105.575447] lo: Disabled Privacy Extensions
[ 105.792016] eth0: no IPv6 routers present
[ 106.105350] [drm] Initialized drm 1.1.0 20060810
[ 106.874996] alloc irq_desc for 16 on node 0
[ 106.875005] alloc kstat_irqs on node 0
[ 106.875027] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 106.876832] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[ 106.877783] ioctl32(Xorg:2455): Unknown cmd fd(11) cmd(c0106407){t:'d';sz:16} arg(ffc000f0) on /dev/dri/card0
[ 106.877831] ioctl32(Xorg:2455): Unknown cmd fd(11) cmd(c0106407){t:'d';sz:16} arg(ffc000f0) on /dev/dri/card0
[ 106.877848] ioctl32(Xorg:2455): Unknown cmd fd(11) cmd(c0086401){t:'d';sz:8} arg(ffc000e8) on /dev/dri/card0
[ 106.953802] ioctl32(Xorg:2455): Unknown cmd fd(11) cmd(c0246400){t:'d';sz:36} arg(0995bf10) on /dev/dri/card0
[ 107.014195] ioctl32(Xorg:2455): Unknown cmd fd(11) cmd(c0246400){t:'d';sz:36} arg(0995bf10) on /dev/dri/card0
[ 110.538621] mtrr: no MTRR for d0000000,8000000 found
[ 113.879510] ioctl32(Xorg:2703): Unknown cmd fd(11) cmd(c0246400){t:'d';sz:36} arg(0a211f10) on /dev/dri/card0
[ 113.879584] ioctl32(Xorg:2703): Unknown cmd fd(11) cmd(c0246400){t:'d';sz:36} arg(0a211f10) on /dev/dri/card0
[ 113.912543] ioctl32(Xorg:2703): Unknown cmd fd(11) cmd(c0106407){t:'d';sz:16} arg(ffd09fa0) on /dev/dri/card0
[ 113.912568] ioctl32(Xorg:2703): Unknown cmd fd(11) cmd(c0106407){t:'d';sz:16} arg(ffd09fa0) on /dev/dri/card0
[ 113.912577] ioctl32(Xorg:2703): Unknown cmd fd(11) cmd(c0086401){t:'d';sz:8} arg(ffd09f98) on /dev/dri/card0
[ 113.975251] ioctl32(Xorg:2703): Unknown cmd fd(11) cmd(c0246400){t:'d';sz:36} arg(0a211f10) on /dev/dri/card0
[ 114.012590] ioctl32(Xorg:2703): Unknown cmd fd(11) cmd(c0246400){t:'d';sz:36} arg(0a211f10) on /dev/dri/card0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.33-rc7 (paul@mattotaupa) (gcc version 4.6.1 (Debian 4.6.1-6) ) #23 SMP Mon Aug 15 13:50:08 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.33-rc7 root=/dev/mapper/speicher-root ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
[ 0.000000] BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e9c20 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077fb0000 (usable)
[ 0.000000] BIOS-e820: 0000000077fb0000 - 0000000077fbe000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000077fbe000 - 0000000077fe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077fe0000 - 0000000078000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ c8000000 old size 32 MB
[ 0.000000] Aperture from AGP @ c8000000 size 128 MB (APSIZE f20)
[ 0.000000] last_pfn = 0x77fb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 base 0060000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0070000000 mask FFF8000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-0000000077fb0000
[ 0.000000] 0000000000 - 0077e00000 page 2M
[ 0.000000] 0077e00000 - 0077fb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 77fb0000 @ 16000-1a000
[ 0.000000] RAMDISK: 37718000 - 37b83755
[ 0.000000] ACPI: RSDP 00000000000fa8b0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0000000077fb0100 0005C (v01 103007 XSDT1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: FACP 0000000077fb0290 000F4 (v03 103007 FACP1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0000000077fb0490 0547E (v01 A0692 A0692000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0000000077fbe000 00040
[ 0.000000] ACPI: APIC 0000000077fb0390 00068 (v01 103007 APIC1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0000000077fb0400 0003C (v01 103007 OEMMCFG 20071030 MSFT 00000097)
[ 0.000000] ACPI: WDRT 0000000077fb0440 00047 (v01 103007 VT-8237S 20071030 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0000000077fbe040 00075 (v01 103007 OEMB1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: HPET 0000000077fb5910 00038 (v01 103007 VT-8237S 20071030 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0000000077fb5950 00206 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000077fb0000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000077fb0000
[ 0.000000] NODE_DATA [0000000000018000 - 0000000000020fff]
[ 0.000000] bootmap [0000000000021000 - 000000000002fff7] pages f
[ 0.000000] (12 early reservations) ==> bootmem [0000000000 - 0077fb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 00018579c4] TEXT DATA BSS ==> [0001000000 - 00018579c4]
[ 0.000000] #2 [0037718000 - 0037b83755] RAMDISK ==> [0037718000 - 0037b83755]
[ 0.000000] #3 [0001858000 - 0001858290] BRK ==> [0001858000 - 0001858290]
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
[ 0.000000] #6 [000009b000 - 00000f0f40] BIOS reserved ==> [000009b000 - 00000f0f40]
[ 0.000000] #7 [00000f1094 - 00000ff780] BIOS reserved ==> [00000f1094 - 00000ff780]
[ 0.000000] #8 [00000f0f40 - 00000f1094] MP-table mpc ==> [00000f0f40 - 00000f1094]
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
[ 0.000000] #11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x00077fb0
[ 0.000000] On node 0 totalpages: 491323
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3815 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6663 pages used for memmap
[ 0.000000] DMA32 zone: 480681 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ea000
[ 0.000000] PM: Registered nosave memory: 00000000000ea000 - 0000000000
 
Old 08-15-2011, 01:18 PM
Paul Menzel
 
Default Bug#613979: "BUG: Unable to handle kernel paging request at ffffc90013cd8000" and no sound card recognized

Dear folks,


Am Montag, den 15.08.2011, 15:00 +0200 schrieb Paul Menzel:

> Am Donnerstag, den 14.07.2011, 23:35 +0200 schrieb Svante Signell:
> > On Thu, 2011-07-14 at 13:27 -0500, Jonathan Nieder wrote:
>
> > > Takashi Iwai wrote:
> > > >>> On Wed, 2011-03-30 at 15:13 +0200, Clemens Ladisch wrote:
> > > >>>>>>>>> Svante Signell wrote:
> > >
> > > >>>>>>>>>> During boot of kernel 2.6.38 (and 2.6.37) udev bugs out:
> > > >>>>>>>>>> Waiting for /dev to be fully populated
> > > >>>>>>>>>> BUG: Unable to handle kernel paging request at ffffc90013cd8000
> > > >>>>>>>>>> axz_probe+ ... [snd_hda_intel]
> > > >>>>>>>>>> ...lots of output lost...
> > > >>>>>>>>>> udevadm timeout 180 sec ...
> > > >>>>>>>>>> udevd[390]: worker [439] failed while handling
> > > >>>>>>>>>> '/devices/pci0000:80/0000:80:01.0'
> > > >>>>>>>>>>
> > > >>>>>>>>>> After the timeout the boot continues! Have not yet tested if sound is
> > > >>>>>>>>>> functional.
> > > [...]
> > > >>>> This is the azx_readw(chip, GCAP) in azx_create(); chip->remap_addr is
> > > >>>> 0xffffc90011c08000 which does look like a valid pointer, but isn't.
> > > [...]
> > > > The point where it Oops implies that the problem isn't in the sound
> > > > driver but rather in a breakage in a deeper level, either PCI core,
> > > > x86 mm or ACPI/BIOS.
> > > >
> > > > Any chance to bisect the kernel?
> > >
> > > Svante bisected it to v2.6.34-rc1~218^2~27 (x86/pci: Use
> > > resource_size_t in update_res, 2010-02-10) --- thanks. Which is
> > > pretty weird, since I think phys_addr_t on an amd64 machine (and hence
> > > resource_size_t) would be 64 bits, making that commit a no-op.
> > >
> > > Svante, more questions (sorry):
> > >
> > > - could you try booting b74fd238a9cf and b74fd238a9cf^ again
> > > (to make sure we haven't hit a heisenbug) and send the
> > > corresponding full dmesg and .config files?
> >
> > I am very sorry but I don't have physical access to that box for a month
> > from now. However, something that might be more interesting is the
> > output of the second-to last message that was concerning
> > x86/pci/amd/.... I might get help to find that message in a few days.
>
> thanks to Jonathan’s help I was able to perform the bisection.
>
> $ git bisect start 0f2cc4ecd81dc1917a041dc93db0ada28f8356fa 8724fdb53d27d7b59b60c8a399cc67f9abfabb33
> […]
> $ git bisect log
> # bad: [0f2cc4ecd81dc1917a041dc93db0ada28f8356fa] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
> # good: [8724fdb53d27d7b59b60c8a399cc67f9abfabb33] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
> git bisect start '0f2cc4ecd81dc1917a041dc93db0ada28f8356fa' '8724fdb53d27d7b59b60c8a399cc67f9abfabb33'
> # good: [14f3ad6f4a12495b32b0dd743bc7179f36658208] ipv6: Use 1280 as min MTU for ipv6 forwarding
> git bisect good 14f3ad6f4a12495b32b0dd743bc7179f36658208
> # good: [60f8a8d4c6c46bb080e8e65d30be31b172a39a78] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
> git bisect good 60f8a8d4c6c46bb080e8e65d30be31b172a39a78
> # bad: [7f5b09c15ab989ed5ce4adda0be42c1302df70b7] Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
> git bisect bad 7f5b09c15ab989ed5ce4adda0be42c1302df70b7
> # good: [9f445cb29918dc488b7a9a92ef018599cce33df7] USB: musb: disable double buffering for older RTL versions
> git bisect good 9f445cb29918dc488b7a9a92ef018599cce33df7
> # bad: [fb7b096d949fa852442ed9d8f982bce526ccfe7e] Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
> git bisect bad fb7b096d949fa852442ed9d8f982bce526ccfe7e
> # bad: [dce46a04d55d6358d2d4ab44a4946a19f9425fe2] early_res: Need to save the allocation name in drop_range_partial()
> git bisect bad dce46a04d55d6358d2d4ab44a4946a19f9425fe2
> # bad: [c252a5bb1f57afb1e336d68085217727ca7b2134] x86: Only call dma32_reserve_bootmem 64bit !CONFIG_NUMA
> git bisect bad c252a5bb1f57afb1e336d68085217727ca7b2134
> # bad: [9ad3f2c7c69659c343843393944d739fec1f2e73] x86/pci: Add cap_resource()
> git bisect bad 9ad3f2c7c69659c343843393944d739fec1f2e73
> # good: [27811d8cabe56e0c3622251b049086f49face4ff] x86: Move range related operation to one file
> git bisect good 27811d8cabe56e0c3622251b049086f49face4ff
> # bad: [3e3da00c01d050307e753fb7b3e84aefc16da0d0] x86/pci: AMD one chain system to use pci read out res
> git bisect bad 3e3da00c01d050307e753fb7b3e84aefc16da0d0
>
> and `git bisect` showed me the same faulty commit as Svante found out:
> b74fd238 [2].
>
> commit b74fd238a9cf39a81d94152f375b756bf795b4af
> Author: Yinghai Lu <yinghai@kernel.org>
> Date: Wed Feb 10 01:20:08 2010 -0800
>
> x86/pci: Use resource_size_t in update_res
>
> (Is there a command to show that summary again? I could not find it in
> the help.)
>
> But I before started with the bisection I tried what Jonathan asked
> Svante to do and b74fd238a9cf and b74fd238a9cf^ did not show these
> problems. Additionally it is weird that I never had to test that commit
> b74fd238 in that bisection run.
>
> I will test it again¹ and rebuild it and report back. But I would
> suspect 3e3da00c [2] as the culprit.
>
> commit 3e3da00c01d050307e753fb7b3e84aefc16da0d0
> Author: Yinghai Lu <yinghai@kernel.org>
> Date: Wed Feb 10 01:20:09 2010 -0800
>
> x86/pci: AMD one chain system to use pci read out res
>
> `make` should take care of all necessary recompilations I guess, so no
> `make clean`(?) is required.

So from my perspective I would say `git bisect` has a bug.

$ git --version
git version 1.7.5.4

Here is the new result.

$ git bisect good b74fd238a9cf39a81d94152f375b756bf795b4af
3e3da00c01d050307e753fb7b3e84aefc16da0d0 is the first bad commit
commit 3e3da00c01d050307e753fb7b3e84aefc16da0d0
Author: Yinghai Lu <yinghai@kernel.org>
Date: Wed Feb 10 01:20:09 2010 -0800

x86/pci: AMD one chain system to use pci read out res

Found MSI amd k8 based laptops is hiding [0x70000000, 0x80000000) RAM
from e820.

enable amd one chain even for all.

-v2: use bool for found, according to Andrew

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-6-git-send-email-yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

:040000 040000 44e134ff22492c50d49c5e66880cfbf0b6738e50 f3e9511913b613c2f98e96136927b5ed44736e4e M arch

Please notice that with this patch also the following messages seem to
start to be written to the Linux kernel ring buffer (`dmesg`).

[ 0.227319] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.227324] pnp 00:0e: disabling [mem 0x000c0000-0x000bffff disabled] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.227330] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.227334] pnp 00:0e: disabling [mem 0x00100000-0x77ffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]


Thanks,

Paul


> ¹ It would be nice if the SHA1 checksum of the commit could be
> incorporated in the Debian package somehow.
>
>
> [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b74fd238a9cf39a81d94152f375b756 bf795b4af
> [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3e3da00c01d050307e753fb7b3e84ae fc16da0d0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.33-rc7 (paul@mattotaupa) (gcc version 4.6.1 (Debian 4.6.1-6) ) #25 SMP Mon Aug 15 14:53:56 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.33-rc7 root=/dev/mapper/speicher-root ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
[ 0.000000] BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e9c20 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077fb0000 (usable)
[ 0.000000] BIOS-e820: 0000000077fb0000 - 0000000077fbe000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000077fbe000 - 0000000077fe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077fe0000 - 0000000078000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ c8000000 old size 32 MB
[ 0.000000] Aperture from AGP @ c8000000 size 128 MB (APSIZE f20)
[ 0.000000] last_pfn = 0x77fb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 base 0060000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0070000000 mask FFF8000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-0000000077fb0000
[ 0.000000] 0000000000 - 0077e00000 page 2M
[ 0.000000] 0077e00000 - 0077fb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 77fb0000 @ 16000-1a000
[ 0.000000] RAMDISK: 37718000 - 37b8372f
[ 0.000000] ACPI: RSDP 00000000000fa8b0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0000000077fb0100 0005C (v01 103007 XSDT1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: FACP 0000000077fb0290 000F4 (v03 103007 FACP1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0000000077fb0490 0547E (v01 A0692 A0692000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0000000077fbe000 00040
[ 0.000000] ACPI: APIC 0000000077fb0390 00068 (v01 103007 APIC1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0000000077fb0400 0003C (v01 103007 OEMMCFG 20071030 MSFT 00000097)
[ 0.000000] ACPI: WDRT 0000000077fb0440 00047 (v01 103007 VT-8237S 20071030 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0000000077fbe040 00075 (v01 103007 OEMB1341 20071030 MSFT 00000097)
[ 0.000000] ACPI: HPET 0000000077fb5910 00038 (v01 103007 VT-8237S 20071030 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0000000077fb5950 00206 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000077fb0000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000077fb0000
[ 0.000000] NODE_DATA [0000000000018000 - 0000000000020fff]
[ 0.000000] bootmap [0000000000021000 - 000000000002fff7] pages f
[ 0.000000] (12 early reservations) ==> bootmem [0000000000 - 0077fb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 00018579c4] TEXT DATA BSS ==> [0001000000 - 00018579c4]
[ 0.000000] #2 [0037718000 - 0037b8372f] RAMDISK ==> [0037718000 - 0037b8372f]
[ 0.000000] #3 [0001858000 - 0001858290] BRK ==> [0001858000 - 0001858290]
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
[ 0.000000] #6 [000009b000 - 00000f0f40] BIOS reserved ==> [000009b000 - 00000f0f40]
[ 0.000000] #7 [00000f1094 - 00000ff780] BIOS reserved ==> [00000f1094 - 00000ff780]
[ 0.000000] #8 [00000f0f40 - 00000f1094] MP-table mpc ==> [00000f0f40 - 00000f1094]
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
[ 0.000000] #11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x00077fb0
[ 0.000000] On node 0 totalpages: 491323
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3815 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6663 pages used for memmap
[ 0.000000] DMA32 zone: 480681 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ea000
[ 0.000000] PM: Registered nosave memory: 00000000000ea000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 78000000 (gap: 78000000:86c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001a00000 s90456 r8192 d24232 u1048576
[ 0.000000] pcpu-alloc: s90456 r8192 d24232 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 484496
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.33-rc7 root=/dev/mapper/speicher-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ c8000000 old size 32 MB
[ 0.000000] Aperture from AGP @ c8000000 size 128 MB (APSIZE f20)
[ 0.000000] Node 0: aperture @ c8000000 size 128 MB
[ 0.000000] Memory: 1923116k/1965760k available (2889k kernel code, 468k absent, 42176k reserved, 3911k data, 632k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2101.001 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4202.00 BogoMIPS (lpj=8404004)
[ 0.004039] Security Framework initialized
[ 0.004046] SELinux: Disabled at boot.
[ 0.004228] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005532] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.006099] Mount-cache hash table entries: 256
[ 0.006273] Initializing cgroup subsys ns
[ 0.006277] Initializing cgroup subsys cpuacct
[ 0.006281] Initializing cgroup subsys devices
[ 0.006284] Initializing cgroup subsys freezer
[ 0.006287] Initializing cgroup subsys net_cls
[ 0.006314] tseg: 0000000000
[ 0.006340] CPU: Physical Processor ID: 0
[ 0.006342] CPU: Processor Core ID: 0
[ 0.006346] mce: CPU supports 5 MCE banks
[ 0.006357] using C1E aware idle routine
[ 0.006360] Performance Events: AMD PMU driver.
[ 0.006365] ... version: 0
[ 0.006367] ... bit width: 48
[ 0.006369] ... generic registers: 4
[ 0.006372] ... value mask: 0000ffffffffffff
[ 0.006374] ... max period: 00007fffffffffff
[ 0.006376] ... fixed-purpose events: 0
[ 0.006378] ... event mask: 000000000000000f
[ 0.006671] ACPI: Core revision 20091214
[ 0.016069] Setting APIC routing to flat
[ 0.016465] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.059136] CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 02
[ 0.060000] Booting Node 0, Processors #1 Ok.
[ 0.144067] Brought up 2 CPUs
[ 0.144070] Total of 2 processors activated (8404.51 BogoMIPS).
[ 0.144340] devtmpfs: initialized
[ 0.144340] regulator: core version 0.5
[ 0.144340] NET: Registered protocol family 16
[ 0.144340] node 0 link 0: io port [1000, ffffff]
[ 0.144340] TOM: 0000000080000000 aka 2048M
[ 0.144340] node 0 link 0: mmio [e0000000, efffffff]
[ 0.144340] node 0 link 0: mmio [c8000000, cfffffff]
[ 0.144340] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.144340] node 0 link 0: mmio [fa000000, faffffff]
[ 0.144340] node 0 link 0: mmio [a0000, bffff]
[ 0.144340] node 0 link 0: mmio [80000000, ffffffff]
[ 0.144340] bus: [00, ff] on node 0 link 0
[ 0.144340] bus: 00 index 0 io port: [0, ffff]
[ 0.144340] bus: 00 index 1 mmio: [80000000, fcffffffff]
[ 0.144340] bus: 00 index 2 mmio: [c8000000, cfffffff]
[ 0.144340] bus: 00 index 3 mmio: [fa000000, faffffff]
[ 0.144340] bus: 00 index 4 mmio: [a0000, bffff]
[ 0.144340] ACPI: bus type pci registered
[ 0.144340] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.144340] PCI: not using MMCONFIG
[ 0.144340] PCI: Using configuration type 1 for base access
[ 0.144673] bio: create slab <bio-0> at 0
[ 0.144796] ACPI: EC: Look up EC in DSDT
[ 0.151904] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.157168] ACPI: Interpreter enabled
[ 0.157173] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.157199] ACPI: Using IOAPIC for interrupt routing
[ 0.157254] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.163845] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.192559] ACPI Warning: Incorrect checksum in table [OEMB] - ED, should be E8 (20091214/tbutils-314)
[ 0.192712] ACPI: No dock devices found.
[ 0.192870] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.192900] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 0.193181] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.193184] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.193187] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.193190] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.193193] pci_root PNP0A03:00: host bridge window [mem 0x78000000-0xdfffffff] (ignored)
[ 0.193197] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbefffff] (ignored)
[ 0.193229] pci 0000:00:00.0: reg 10: [mem 0xc8000000-0xcfffffff pref]
[ 0.193685] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.193690] pci 0000:00:02.0: PME# disabled
[ 0.193768] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.193772] pci 0000:00:03.0: PME# disabled
[ 0.193823] pci 0000:00:0f.0: reg 10: [io 0xec00-0xec07]
[ 0.193829] pci 0000:00:0f.0: reg 14: [io 0xe880-0xe883]
[ 0.193836] pci 0000:00:0f.0: reg 18: [io 0xe800-0xe807]
[ 0.193843] pci 0000:00:0f.0: reg 1c: [io 0xe480-0xe483]
[ 0.193849] pci 0000:00:0f.0: reg 20: [io 0xe400-0xe40f]
[ 0.193856] pci 0000:00:0f.0: reg 24: [io 0xe000-0xe0ff]
[ 0.193920] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.193995] pci 0000:00:10.0: reg 20: [io 0xd480-0xd49f]
[ 0.194019] pci 0000:00:10.0: supports D1 D2
[ 0.194021] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194026] pci 0000:00:10.0: PME# disabled
[ 0.194068] pci 0000:00:10.1: reg 20: [io 0xd800-0xd81f]
[ 0.194093] pci 0000:00:10.1: supports D1 D2
[ 0.194095] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194099] pci 0000:00:10.1: PME# disabled
[ 0.194142] pci 0000:00:10.2: reg 20: [io 0xd880-0xd89f]
[ 0.194166] pci 0000:00:10.2: supports D1 D2
[ 0.194169] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194173] pci 0000:00:10.2: PME# disabled
[ 0.194216] pci 0000:00:10.3: reg 20: [io 0xdc00-0xdc1f]
[ 0.194240] pci 0000:00:10.3: supports D1 D2
[ 0.194243] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194247] pci 0000:00:10.3: PME# disabled
[ 0.194279] pci 0000:00:10.4: reg 10: [mem 0xf9fffc00-0xf9fffcff]
[ 0.194322] pci 0000:00:10.4: supports D1 D2
[ 0.194325] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194329] pci 0000:00:10.4: PME# disabled
[ 0.194486] pci 0000:00:12.0: reg 10: [io 0xd000-0xd0ff]
[ 0.194493] pci 0000:00:12.0: reg 14: [mem 0xf9fff800-0xf9fff8ff]
[ 0.194530] pci 0000:00:12.0: supports D1 D2
[ 0.194532] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194537] pci 0000:00:12.0: PME# disabled
[ 0.194765] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.194771] pci 0000:01:00.0: reg 14: [mem 0xfa000000-0xfaffffff]
[ 0.194789] pci 0000:01:00.0: reg 30: [mem 0xfbef0000-0xfbefffff pref]
[ 0.194807] pci 0000:01:00.0: supports D1 D2
[ 0.194843] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.194849] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff]
[ 0.194854] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.194898] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.194951] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.195004] pci 0000:00:13.1: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.195032] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.195208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.195253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.195366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.195410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.195473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[ 0.214904] ACPI: PCI Root Bridge [PCI1] (0000:20)
[ 0.214933] pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 0.215280] pci_root PNP0A08:00: host bridge window [mem 0xfbf00000-0xfbffffff] (ignored)
[ 0.215308] pci 0000:20:01.0: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
[ 0.215345] pci 0000:20:01.0: PME# supported from D0 D3hot D3cold
[ 0.215349] pci 0000:20:01.0: PME# disabled
[ 0.215394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.215771] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.215886] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.216006] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.216125] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.216237] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.216359] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.216480] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.216601] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.216745] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.216748] vgaarb: loaded
[ 0.216809] PCI: Using ACPI for IRQ routing
[ 0.216809] PCI: pci_cache_line_size set to 64 bytes
[ 0.216809] pci 0000:00:00.0: address space collision: [mem 0xc8000000-0xcfffffff pref] already in use
[ 0.216809] pci 0000:00:00.0: can't reserve [mem 0xc8000000-0xcfffffff pref]
[ 0.216809] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.216809] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.216809] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.220013] Switching to clocksource hpet
[ 0.221411] pnp: PnP ACPI init
[ 0.221431] ACPI: bus type pnp registered
[ 0.227319] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.227324] pnp 00:0e: disabling [mem 0x000c0000-0x000bffff disabled] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.227330] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.227334] pnp 00:0e: disabling [mem 0x00100000-0x77ffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.228034] pnp: PnP ACPI: found 16 devices
[ 0.228036] ACPI: ACPI bus type pnp unregistered
[ 0.228054] system 00:05: [io 0x03e0-0x03e7] has been reserved
[ 0.228058] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.228061] system 00:05: [io 0x0800-0x087f] has been reserved
[ 0.228064] system 00:05: [io 0x0400-0x041f] has been reserved
[ 0.228069] system 00:05: [mem 0xfecc0000-0xfecc0fff] could not be reserved
[ 0.228072] system 00:05: [mem 0xfed02000-0xfed02fff] has been reserved
[ 0.228081] system 00:09: [io 0x0c00-0x0c0f] has been reserved
[ 0.228084] system 00:09: [io 0x0d00-0x0d0f] has been reserved
[ 0.228087] system 00:09: [io 0x0a20-0x0a2f] has been reserved
[ 0.228091] system 00:09: [io 0x0a30-0x0a3f] has been reserved
[ 0.228097] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.228101] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.228104] system 00:0c: [mem 0x78000000-0x7fffffff] has been reserved
[ 0.228109] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.228115] system 00:0e: [mem 0xfc000000-0xffffffff] could not be reserved
[ 0.233008] pci 0000:00:02.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.233012] pci 0000:00:02.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.233016] pci 0000:00:03.0: BAR 14: assigned [mem 0x80400000-0x805fffff]
[ 0.233019] pci 0000:00:03.0: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.233023] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.233027] pci 0000:00:03.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.233030] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.233032] pci 0000:00:01.0: bridge window [io disabled]
[ 0.233037] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff]
[ 0.233042] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.233048] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.233052] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 0.233058] pci 0000:00:02.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.233063] pci 0000:00:02.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.233070] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.233073] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.233079] pci 0000:00:03.0: bridge window [mem 0x80400000-0x805fffff]
[ 0.233084] pci 0000:00:03.0: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.233091] pci 0000:00:13.1: PCI bridge to [bus 04-04]
[ 0.233093] pci 0000:00:13.1: bridge window [io disabled]
[ 0.233098] pci 0000:00:13.1: bridge window [mem disabled]
[ 0.233102] pci 0000:00:13.1: bridge window [mem pref disabled]
[ 0.233117] pci 0000:00:01.0: setting latency timer to 64
[ 0.233125] pci 0000:00:02.0: enabling device (0104 -> 0107)
[ 0.233131] alloc irq_desc for 27 on node 0
[ 0.233134] alloc kstat_irqs on node 0
[ 0.233140] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.233145] pci 0000:00:02.0: setting latency timer to 64
[ 0.233153] pci 0000:00:03.0: enabling device (0104 -> 0107)
[ 0.233157] alloc irq_desc for 31 on node 0
[ 0.233159] alloc kstat_irqs on node 0
[ 0.233163] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 0.233168] pci 0000:00:03.0: setting latency timer to 64
[ 0.233174] pci 0000:00:13.1: setting latency timer to 64
[ 0.233178] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.233181] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.233184] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbefffff]
[ 0.233187] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[ 0.233190] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.233193] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
[ 0.233196] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.233199] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.233202] pci_bus 0000:03: resource 1 [mem 0x80400000-0x805fffff]
[ 0.233205] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.233208] pci_bus 0000:04: resource 3 [io 0x0000-0xffff]
[ 0.233210] pci_bus 0000:04: resource 4 [mem 0x00000000-0xffffffffffffffff]
[ 0.233214] pci_bus 0000:20: resource 0 [io 0x0000-0xffff]
[ 0.233216] pci_bus 0000:20: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.233250] NET: Registered protocol family 2
[ 0.233360] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.234315] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.236570] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.237133] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.237136] TCP reno registered
[ 0.237149] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.237180] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.237308] NET: Registered protocol family 1
[ 0.237321] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.237344] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.237455] pci 0000:01:00.0: Boot video device
[ 0.237461] PCI: CLS 64 bytes, default 64
[ 0.237532] Unpacking initramfs...
[ 0.355910] Freeing initrd memory: 4525k freed
[ 0.358968] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[ 0.363926] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xc8000000
[ 0.364339] audit: initializing netlink socket (disabled)
[ 0.364350] type=2000 audit(1313413377.364:1): initialized
[ 0.376082] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.377734] VFS: Disk quotas dquot_6.5.2
[ 0.377788] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.377874] msgmni has been set to 3764
[ 0.378124] alg: No test for stdrng (krng)
[ 0.378187] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.378191] io scheduler noop registered
[ 0.378193] io scheduler deadline registered
[ 0.378256] io scheduler cfq registered (default)
[ 0.378440] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.378593] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.380454] Linux agpgart interface v0.103
[ 0.380519] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.380621] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.380937] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.381132] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.381186] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x0,0x0 irq 12
[ 0.381189] PNP: PS/2 controller has invalid data port 0x0; using default 0x60
[ 0.381192] PNP: PS/2 controller has invalid command port 0x0; using default 0x64
[ 0.381194] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.381642] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.381650] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.381736] mice: PS/2 mouse device common for all mice
[ 0.381778] rtc_cmos 00:08: RTC can wake from S4
[ 0.381823] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.381859] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.381872] cpuidle: using governor ladder
[ 0.381875] cpuidle: using governor menu
[ 0.381878] No iBFT detected.
[ 0.382145] TCP cubic registered
[ 0.382298] NET: Registered protocol family 10
[ 0.382737] lo: Disabled Privacy Extensions
[ 0.382971] Mobile IPv6
[ 0.382974] NET: Registered protocol family 17
[ 0.383067] PM: Resume from disk failed.
[ 0.383079] registered taskstats version 1
[ 0.383410] rtc_cmos 00:08: setting system clock to 2011-08-15 13:02:57 UTC (1313413377)
[ 0.383444] Initalizing network drop monitor service
[ 0.383485] Freeing unused kernel memory: 632k freed
[ 0.383886] Write protecting the kernel read-only data: 6144k
[ 0.384111] Freeing unused kernel memory: 1188k freed
[ 0.384978] Freeing unused kernel memory: 468k freed
[ 0.453472] <30>udevd[64]: starting version 172
[ 0.599350] SCSI subsystem initialized
[ 0.611545] usbcore: registered new interface driver usbfs
[ 0.611702] usbcore: registered new interface driver hub
[ 0.611754] usbcore: registered new device driver usb
[ 0.616064] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 0.616141] alloc irq_desc for 23 on node 0
[ 0.616144] alloc kstat_irqs on node 0
[ 0.616154] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.616427] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.628496] eth0: VIA Rhine II at 0x1d000, 00:1e:8c:b9:4b:2a, IRQ 23.
[ 0.629209] eth0: MII PHY found at address 1, status 0x796d advertising 0de1 Link 45e1.
[ 0.636073] alloc irq_desc for 21 on node 0
[ 0.636076] alloc kstat_irqs on node 0
[ 0.636084] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.636105] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.636138] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 0.636175] ehci_hcd 0000:00:10.4: debug port 1
[ 0.636199] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9fffc00
[ 0.639623] libata version 3.00 loaded.
[ 0.648019] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.648052] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.648056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.648058] usb usb1: Product: EHCI Host Controller
[ 0.648061] usb usb1: Manufacturer: Linux 2.6.33-rc7 ehci_hcd
[ 0.648063] usb usb1: SerialNumber: 0000:00:10.4
[ 0.648249] hub 1-0:1.0: USB hub found
[ 0.648255] hub 1-0:1.0: 8 ports detected
[ 0.650376] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.650470] pata_via 0000:00:0f.1: version 0.3.4
[ 0.650650] scsi0 : pata_via
[ 0.650755] scsi1 : pata_via
[ 0.652755] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.652759] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.652859] alloc irq_desc for 20 on node 0
[ 0.652862] alloc kstat_irqs on node 0
[ 0.652869] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.652877] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.652896] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.652931] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d480
[ 0.652982] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.652985] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.652988] usb usb2: Product: UHCI Host Controller
[ 0.652990] usb usb2: Manufacturer: Linux 2.6.33-rc7 uhci_hcd
[ 0.652992] usb usb2: SerialNumber: 0000:00:10.0
[ 0.653120] hub 2-0:1.0: USB hub found
[ 0.653131] hub 2-0:1.0: 2 ports detected
[ 0.653226] alloc irq_desc for 22 on node 0
[ 0.653228] alloc kstat_irqs on node 0
[ 0.653233] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.653239] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.653248] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.653278] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d800
[ 0.653317] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.653320] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.653323] usb usb3: Product: UHCI Host Controller
[ 0.653325] usb usb3: Manufacturer: Linux 2.6.33-rc7 uhci_hcd
[ 0.653328] usb usb3: SerialNumber: 0000:00:10.1
[ 0.653420] hub 3-0:1.0: USB hub found
[ 0.653425] hub 3-0:1.0: 2 ports detected
[ 0.653501] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.653508] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.653517] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 0.653539] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d880
[ 0.653583] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.653586] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.653589] usb usb4: Product: UHCI Host Controller
[ 0.653592] usb usb4: Manufacturer: Linux 2.6.33-rc7 uhci_hcd
[ 0.653594] usb usb4: SerialNumber: 0000:00:10.2
[ 0.653694] hub 4-0:1.0: USB hub found
[ 0.653698] hub 4-0:1.0: 2 ports detected
[ 0.653776] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.653782] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.653791] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 0.653824] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000dc00
[ 0.653865] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.653868] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.653870] usb usb5: Product: UHCI Host Controller
[ 0.653873] usb usb5: Manufacturer: Linux 2.6.33-rc7 uhci_hcd
[ 0.653875] usb usb5: SerialNumber: 0000:00:10.3
[ 0.653969] hub 5-0:1.0: USB hub found
[ 0.653973] hub 5-0:1.0: 2 ports detected
[ 0.697943] sata_via 0000:00:0f.0: version 2.4
[ 0.697954] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.697989] sata_via 0000:00:0f.0: routed to hard irq line 5
[ 0.698044] scsi2 : sata_via
[ 0.698123] scsi3 : sata_via
[ 0.699822] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 21
[ 0.699825] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 21
[ 0.816459] ata1.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33
[ 0.832339] ata1.00: configured for UDMA/33
[ 0.839850] scsi 0:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5
[ 0.900017] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.004373] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL12, max UDMA/33
[ 1.020254] ata2.00: configured for UDMA/33
[ 1.029003] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL12 PQ: 0 ANSI: 5
[ 1.232015] ata4: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[ 1.256014] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 1.396218] ata4.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100
[ 1.396221] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.404229] ata4.00: configured for UDMA/100
[ 1.404306] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-60M 51.0 PQ: 0 ANSI: 5
[ 1.436999] usb 2-1: New USB device found, idVendor=046d, idProduct=c312
[ 1.437004] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.437007] usb 2-1: Product: USB Multimedia Keyboard
[ 1.437009] usb 2-1: Manufacturer: LITEON Technology
[ 1.451155] usbcore: registered new interface driver hiddev
[ 1.466341] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input1
[ 1.466407] generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:10.0-1/input0
[ 1.466442] usbcore: registered new interface driver usbhid
[ 1.466445] usbhid: USB HID core driver
[ 1.472950] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.472955] Uniform CD-ROM driver Revision: 3.20
[ 1.473076] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.485223] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.485316] sr 1:0:0:0: Attached scsi CD-ROM sr1
[ 1.485610] sd 3:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.485615] sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 1.485670] sd 3:0:0:0: [sda] Write Protect is off
[ 1.485673] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.485696] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.485856] sda:
[ 1.490223] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.490263] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.490299] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.497929] sda1 sda2
[ 1.498342] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.680038] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 1.740590] md: raid1 personality registered for level 1
[ 1.744686] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff8dde04) on /dev/sda2
[ 1.744848] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff8dde24) on /dev/sda2
[ 1.745890] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff8dde04) on /dev/sda1
[ 1.746036] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff8dde24) on /dev/sda1
[ 1.747352] md: md0 stopped.
[ 1.748367] md: bind<sda1>
[ 1.749975] raid1: raid set md0 active with 1 out of 2 mirrors
[ 1.750011] md0: detected capacity change from 0 to 509804544
[ 1.750342] md0: unknown partition table
[ 1.792023] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff8dde04) on /dev/sda2
[ 1.792185] ioctl32(mdadm:275): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff8dde24) on /dev/sda2
[ 1.792972] md: md1 stopped.
[ 1.794318] md: bind<sda2>
[ 1.795984] raid1: raid set md1 active with 1 out of 2 mirrors
[ 1.796042] md1: detected capacity change from 0 to 1999886286848
[ 1.797373] md1: unknown partition table
[ 1.809151] device-mapper: uevent: version 1.0.3
[ 1.809461] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
[ 1.850352] usb 3-2: New USB device found, idVendor=058f, idProduct=9254
[ 1.850357] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.850360] usb 3-2: Product: Generic USB Hub
[ 1.850362] usb 3-2: Manufacturer: ALCOR
[ 1.853417] hub 3-2:1.0: USB hub found
[ 1.855348] hub 3-2:1.0: 4 ports detected
[ 36.174416] PM: Starting manual resume from disk
[ 36.174421] PM: Resume from partition 253:2
[ 36.174423] PM: Checking hibernation image.
[ 36.177273] PM: Error -22 checking image file
[ 36.177275] PM: Resume from disk failed.
[ 36.213230] kjournald starting. Commit interval 5 seconds
[ 36.213241] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 37.653568] <30>udevd[496]: starting version 172
[ 38.004553] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 38.004565] ACPI: Sleep Button [SLPB]
[ 38.004638] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 38.004642] ACPI: Power Button [PWRB]
[ 38.004710] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 38.004713] ACPI: Power Button [PWRF]
[ 38.026481] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.046869] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.133784] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 38.147094] EDAC MC: Ver: 2.1.0 Aug 15 2011
[ 38.147443] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 38.150366] parport_pc 00:04: reported by Plug and Play ACPI
[ 38.150413] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 38.157070] EDAC amd64_edac: Ver: 3.3.0 Aug 15 2011
[ 38.160358] EDAC amd64: ECC is enabled by BIOS.
[ 38.160403] EDAC MC: Rev F or later detected
[ 38.160414] EDAC MC: DCT0 chip selects:
[ 38.160417] EDAC MC: 0: 1024MB 1: 1024MB
[ 38.160419] EDAC MC: 2: 0MB 3: 0MB
[ 38.160421] EDAC MC: 4: 0MB 5: 0MB
[ 38.160424] EDAC MC: 6: 0MB 7: 0MB
[ 38.160475] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[ 38.160505] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 39.027619] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 39.040139] alloc irq_desc for 17 on node 0
[ 39.040143] alloc kstat_irqs on node 0
[ 39.040154] HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 39.040241] HDA Intel 0000:20:01.0: setting latency timer to 64
[ 39.040246] HDA Intel 0000:20:01.0: PCI: Disallowing DAC for device
[ 39.046400] ioctl32(mdadm:802): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffea8f94) on /dev/sda2
[ 39.047155] ioctl32(mdadm:803): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff950bf4) on /dev/sda1
[ 39.047331] ioctl32(mdadm:803): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff950c14) on /dev/sda1
[ 39.048149] ioctl32(mdadm:802): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ffea8fb4) on /dev/sda2
[ 39.122201] input: HDA Digital PCBeep as /devices/pci0000:20/0000:20:01.0/input/input7
[ 39.599205] EXT3-fs (dm-1): using internal journal
[ 40.132304] loop: module loaded
[ 40.234324] kvm: Nested Virtualization enabled
[ 40.365662] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-8
[ 40.369175] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-8
[ 40.405217] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-7
[ 40.409173] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-7
[ 40.473212] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-6
[ 40.477174] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-6
[ 40.513216] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-5
[ 40.517170] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-5
[ 40.548247] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-4
[ 40.553181] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-4
[ 40.581207] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-3
[ 40.595990] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-3
[ 40.621238] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-2
[ 40.625168] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-2
[ 40.689282] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-8
[ 40.693178] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-8
[ 40.713172] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-7
[ 40.717163] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-7
[ 40.737171] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-6
[ 40.741162] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-6
[ 40.761172] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-5
[ 40.765160] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-5
[ 40.785172] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-4
[ 40.789159] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-4
[ 40.809173] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-3
[ 40.813154] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-3
[ 40.833170] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9c4) on /dev/dm-2
[ 40.837160] ioctl32(mdadm:1056): Unknown cmd fd(3) cmd(800c0910){t:09;sz:12} arg(ff90c9e4) on /dev/dm-2
[ 41.783326] Adding 4194296k swap on /dev/mapper/speicher-swap. Priority:-1 extents:1 across:4194296k
[ 43.653858] fuse init (API version 7.13)
[ 43.860398] kjournald starting. Commit interval 5 seconds
[ 43.892483] EXT3-fs (md0): using internal journal
[ 43.892489] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 44.179184] kjournald starting. Commit interval 5 seconds
[ 44.242981] EXT3-fs (dm-6): using internal journal
[ 44.242987] EXT3-fs (dm-6): mounted filesystem with ordered data mode
[ 44.367150] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 44.369361] SGI XFS Quota Management subsystem
[ 44.442151] XFS mounting filesystem dm-7
[ 44.648678] Ending clean XFS mount for filesystem: dm-7
[ 44.848362] XFS mounting filesystem dm-8
[ 45.162490] Ending clean XFS mount for filesystem: dm-8
[ 45.229246] REISERFS (device dm-5): found reiserfs format "3.6" with standard journal
[ 45.229288] REISERFS (device dm-5): using ordered data mode
[ 45.235779] REISERFS (device dm-5): journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 45.237365] REISERFS (device dm-5): checking transaction log (dm-5)
[ 45.253875] REISERFS (device dm-5): Using r5 hash to sort names
[ 45.353896] kjournald starting. Commit interval 5 seconds
[ 45.354461] EXT3-fs (dm-3): using internal journal
[ 45.354466] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 45.398532] kjournald starting. Commit interval 5 seconds
[ 45.398825] EXT3-fs (dm-4): using internal journal
[ 45.398830] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 48.184933] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 processors (2 cpu cores) (version 2.20.00)
[ 48.184986] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xe
[ 48.184989] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xf
[ 48.184992] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x11
[ 48.184995] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x16
[ 48.504019] Clocksource tsc unstable (delta = -148690342 ns)
[ 80.537959] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 82.813669] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 82.921331] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 91.189765] lo: Disabled Privacy Extensions
[ 91.369011] eth0: no IPv6 routers present
[ 91.389596] [drm] Initialized drm 1.1.0 20060810
[ 91.456508] alloc irq_desc for 16 on node 0
[ 91.456517] alloc kstat_irqs on node 0
[ 91.456537] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 91.458347] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[ 91.458964] ioctl32(Xorg:2400): Unknown cmd fd(11) cmd(c0106407){t:'d';sz:16} arg(ffa23cf0) on /dev/dri/card0
[ 91.459014] ioctl32(Xorg:2400): Unknown cmd fd(11) cmd(c0106407){t:'d';sz:16} arg(ffa23cf0) on /dev/dri/card0
[ 91.459031] ioctl32(Xorg:2400): Unknown cmd fd(11) cmd(c0086401){t:'d';sz:8} arg(ffa23ce8) on /dev/dri/card0
[ 91.535808] ioctl32(Xorg:2400): Unknown cmd fd(11) cmd(c0246400){t:'d';sz:36} arg(0999bf10) on /dev/dri/card0
[ 91.601173] ioctl32(Xorg:2400): Unknown cmd fd(11) cmd(c0246400){t:'d';sz:36} arg(0999bf10) on /dev/dri/card0
[ 215.434045] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
 
Old 08-16-2011, 07:55 PM
Svante Signell
 
Default Bug#613979: "BUG: Unable to handle kernel paging request at ffffc90013cd8000" and no sound card recognized

On Mon, 2011-08-15 at 15:18 +0200, Paul Menzel wrote:
> Dear folks,
>
>
> Am Montag, den 15.08.2011, 15:00 +0200 schrieb Paul Menzel:
>
> > Am Donnerstag, den 14.07.2011, 23:35 +0200 schrieb Svante Signell:
> > > On Thu, 2011-07-14 at 13:27 -0500, Jonathan Nieder wrote:
> >
> > > > Takashi Iwai wrote:
> > > > >>> On Wed, 2011-03-30 at 15:13 +0200, Clemens Ladisch wrote:
> > > > >>>>>>>>> Svante Signell wrote:
> > > >
> > > > >>>>>>>>>> During boot of kernel 2.6.38 (and 2.6.37) udev bugs out:
> > > > >>>>>>>>>> Waiting for /dev to be fully populated
> > > > >>>>>>>>>> BUG: Unable to handle kernel paging request at ffffc90013cd8000
> > > > >>>>>>>>>> axz_probe+ ... [snd_hda_intel]
> > > > >>>>>>>>>> ...lots of output lost...
> > > > >>>>>>>>>> udevadm timeout 180 sec ...
> > > > >>>>>>>>>> udevd[390]: worker [439] failed while handling
> > > > >>>>>>>>>> '/devices/pci0000:80/0000:80:01.0'
> > > > >>>>>>>>>>
> > > > >>>>>>>>>> After the timeout the boot continues! Have not yet tested if sound is
> > > > >>>>>>>>>> functional.
> > > > [...]
> > > > >>>> This is the azx_readw(chip, GCAP) in azx_create(); chip->remap_addr is
> > > > >>>> 0xffffc90011c08000 which does look like a valid pointer, but isn't.
> > > > [...]
> > > > > The point where it Oops implies that the problem isn't in the sound
> > > > > driver but rather in a breakage in a deeper level, either PCI core,
> > > > > x86 mm or ACPI/BIOS.
> > > > >
> > > > > Any chance to bisect the kernel?
> > > >
> > > > Svante bisected it to v2.6.34-rc1~218^2~27 (x86/pci: Use
> > > > resource_size_t in update_res, 2010-02-10) --- thanks. Which is
> > > > pretty weird, since I think phys_addr_t on an amd64 machine (and hence
> > > > resource_size_t) would be 64 bits, making that commit a no-op.
> > > >
> > > > Svante, more questions (sorry):
> > > >
> > > > - could you try booting b74fd238a9cf and b74fd238a9cf^ again
> > > > (to make sure we haven't hit a heisenbug) and send the
> > > > corresponding full dmesg and .config files?
> > >
> > > I am very sorry but I don't have physical access to that box for a month
> > > from now. However, something that might be more interesting is the
> > > output of the second-to last message that was concerning
> > > x86/pci/amd/.... I might get help to find that message in a few days.
> >
> > thanks to Jonathan’s help I was able to perform the bisection.
> >
> > $ git bisect start 0f2cc4ecd81dc1917a041dc93db0ada28f8356fa 8724fdb53d27d7b59b60c8a399cc67f9abfabb33
> > […]
> > $ git bisect log
> > # bad: [0f2cc4ecd81dc1917a041dc93db0ada28f8356fa] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
> > # good: [8724fdb53d27d7b59b60c8a399cc67f9abfabb33] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
> > git bisect start '0f2cc4ecd81dc1917a041dc93db0ada28f8356fa' '8724fdb53d27d7b59b60c8a399cc67f9abfabb33'
> > # good: [14f3ad6f4a12495b32b0dd743bc7179f36658208] ipv6: Use 1280 as min MTU for ipv6 forwarding
> > git bisect good 14f3ad6f4a12495b32b0dd743bc7179f36658208
> > # good: [60f8a8d4c6c46bb080e8e65d30be31b172a39a78] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
> > git bisect good 60f8a8d4c6c46bb080e8e65d30be31b172a39a78
> > # bad: [7f5b09c15ab989ed5ce4adda0be42c1302df70b7] Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
> > git bisect bad 7f5b09c15ab989ed5ce4adda0be42c1302df70b7
> > # good: [9f445cb29918dc488b7a9a92ef018599cce33df7] USB: musb: disable double buffering for older RTL versions
> > git bisect good 9f445cb29918dc488b7a9a92ef018599cce33df7
> > # bad: [fb7b096d949fa852442ed9d8f982bce526ccfe7e] Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
> > git bisect bad fb7b096d949fa852442ed9d8f982bce526ccfe7e
> > # bad: [dce46a04d55d6358d2d4ab44a4946a19f9425fe2] early_res: Need to save the allocation name in drop_range_partial()
> > git bisect bad dce46a04d55d6358d2d4ab44a4946a19f9425fe2
> > # bad: [c252a5bb1f57afb1e336d68085217727ca7b2134] x86: Only call dma32_reserve_bootmem 64bit !CONFIG_NUMA
> > git bisect bad c252a5bb1f57afb1e336d68085217727ca7b2134
> > # bad: [9ad3f2c7c69659c343843393944d739fec1f2e73] x86/pci: Add cap_resource()
> > git bisect bad 9ad3f2c7c69659c343843393944d739fec1f2e73
> > # good: [27811d8cabe56e0c3622251b049086f49face4ff] x86: Move range related operation to one file
> > git bisect good 27811d8cabe56e0c3622251b049086f49face4ff
> > # bad: [3e3da00c01d050307e753fb7b3e84aefc16da0d0] x86/pci: AMD one chain system to use pci read out res
> > git bisect bad 3e3da00c01d050307e753fb7b3e84aefc16da0d0
> >
> > and `git bisect` showed me the same faulty commit as Svante found out:
> > b74fd238 [2].
> >
> > commit b74fd238a9cf39a81d94152f375b756bf795b4af
> > Author: Yinghai Lu <yinghai@kernel.org>
> > Date: Wed Feb 10 01:20:08 2010 -0800
> >
> > x86/pci: Use resource_size_t in update_res
> >
> > (Is there a command to show that summary again? I could not find it in
> > the help.)
> >
> > But I before started with the bisection I tried what Jonathan asked
> > Svante to do and b74fd238a9cf and b74fd238a9cf^ did not show these
> > problems. Additionally it is weird that I never had to test that commit
> > b74fd238 in that bisection run.
> >
> > I will test it again¹ and rebuild it and report back. But I would
> > suspect 3e3da00c [2] as the culprit.
> >
> > commit 3e3da00c01d050307e753fb7b3e84aefc16da0d0
> > Author: Yinghai Lu <yinghai@kernel.org>
> > Date: Wed Feb 10 01:20:09 2010 -0800
> >
> > x86/pci: AMD one chain system to use pci read out res
> >
> > `make` should take care of all necessary recompilations I guess, so no
> > `make clean`(?) is required.
>
> So from my perspective I would say `git bisect` has a bug.
>
> $ git --version
> git version 1.7.5.4
>
> Here is the new result.
>
> $ git bisect good b74fd238a9cf39a81d94152f375b756bf795b4af
> 3e3da00c01d050307e753fb7b3e84aefc16da0d0 is the first bad commit
> commit 3e3da00c01d050307e753fb7b3e84aefc16da0d0
> Author: Yinghai Lu <yinghai@kernel.org>
> Date: Wed Feb 10 01:20:09 2010 -0800
>
> x86/pci: AMD one chain system to use pci read out res
>
> Found MSI amd k8 based laptops is hiding [0x70000000, 0x80000000) RAM
> from e820.
>
> enable amd one chain even for all.
>
> -v2: use bool for found, according to Andrew
>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> LKML-Reference: <1265793639-15071-6-git-send-email-yinghai@kernel.org>
> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
>
> :040000 040000 44e134ff22492c50d49c5e66880cfbf0b6738e50 f3e9511913b613c2f98e96136927b5ed44736e4e M arch
>
> Please notice that with this patch also the following messages seem to
> start to be written to the Linux kernel ring buffer (`dmesg`).
>
> [ 0.227319] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
> [ 0.227324] pnp 00:0e: disabling [mem 0x000c0000-0x000bffff disabled] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
> [ 0.227330] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
> [ 0.227334] pnp 00:0e: disabling [mem 0x00100000-0x77ffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
>
>
> Thanks,
>
> Paul
>
>
> > ¹ It would be nice if the SHA1 checksum of the commit could be
> > incorporated in the Debian package somehow.
> >
> >
> > [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b74fd238a9cf39a81d94152f375b756 bf795b4af
> > [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3e3da00c01d050307e753fb7b3e84ae fc16da0d0


I'm back now and have physical access to the computer. How can I confirm
the commit causing the problems?




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 1313524512.23232.32.camel@hp.my.own.domain">http://lists.debian.org/1313524512.23232.32.camel@hp.my.own.domain
 
Old 08-16-2011, 08:01 PM
Jonathan Nieder
 
Default Bug#613979: "BUG: Unable to handle kernel paging request at ffffc90013cd8000" and no sound card recognized

Hi Svante,

Svante Signell wrote:

[lots of irrelevant context snipped]
> I'm back now and have physical access to the computer. How can I confirm
> the commit causing the problems?

Thanks for the offer. Testing 3e3da00c and 3e3da00c^ would be
interesting; posting a boot log from an affected kernel with both
"debug" and "ignore_loglevel" on the kernel command line to

https://bugzilla.kernel.org/show_bug.cgi?id=30552

would also be helpful.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110816200153.GB14009@elie.gateway.2wire.net">htt p://lists.debian.org/20110816200153.GB14009@elie.gateway.2wire.net
 
Old 08-16-2011, 09:18 PM
Paul Menzel
 
Default Bug#613979: "BUG: Unable to handle kernel paging request at ffffc90013cd8000" and no sound card recognized

Dear PCI folks,


do you prefer to discuss this issues on the linux-pci list or in the
Kernel Bug Tracker?


Am Dienstag, den 16.08.2011, 15:01 -0500 schrieb Jonathan Nieder:

> Svante Signell wrote:
>
> [lots of irrelevant context snipped]
> > I'm back now and have physical access to the computer. How can I confirm
> > the commit causing the problems?
>
> Thanks for the offer. Testing 3e3da00c and 3e3da00c^ would be
> interesting; posting a boot log from an affected kernel with both
> "debug" and "ignore_loglevel" on the kernel command line to
>
> https://bugzilla.kernel.org/show_bug.cgi?id=30552
>
> would also be helpful.

As written in the bug tracker [1] adding `debug ignore_loglevel` or
`debug` to the Linux kernel command line the boot stops after around 2
seconds and the cryptsetup LUKS passphrase dialog is not shown. Is that
a know problem with Linux 2.6.3{3,4}?


Thanks,

Paul


[1] https://bugzilla.kernel.org/show_bug.cgi?id=30552#c13
 
Old 12-24-2011, 08:49 AM
Jonathan Nieder
 
Default Bug#613979: "BUG: Unable to handle kernel paging request at ffffc90013cd8000" and no sound card recognized

found 613979 linux-2.6/2.6.34-1~experimental.1
unmerge 619034
quit

Paul Menzel wrote:

> oops with `snd-hda-intel` and audio does not work anymore, since no
> sound devices are shown
[...]
> Additionally the boot process stops for over a minute at `Loading
> LIRC modules`
[...]
> 3e3da00c01d050307e753fb7b3e84aefc16da0d0 is the first bad commit
> commit 3e3da00c01d050307e753fb7b3e84aefc16da0d0
> Author: Yinghai Lu <yinghai@kernel.org>
> Date: Wed Feb 10 01:20:09 2010 -0800
>
> x86/pci: AMD one chain system to use pci read out res
(from the v2.6.34 merge window)

This should be fixed on the ASUS M2V-MX SE by v3.1-rc10~19 (x86/PCI:
use host bridge _CRS info on ASUS M2V-MX SE, 2011-08-31). Thanks for
making it happen.

Unmerging bugs since I suspect on Svante's machine the bug is still
unfixed. Will close this half in a separate message.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111224094936.GA17404@elie.Belkin">http://lists.debian.org/20111224094936.GA17404@elie.Belkin
 

Thread Tools




All times are GMT. The time now is 01:25 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org