FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 07-11-2011, 03:36 AM
Brandon Coleman
 
Default Bug#633516: linux-image-3.0.0-rc6-686-pae: comedi modules missing 3.0-rc6

Package: linux-2.6
Version: 3.0.0~rc6-1~experimental.1
Severity: normal

The following Comedi modules are in the stable Kernel, but are not in
3.0rc6. *Adding these modules will allow continued Comedi operation in
the next Debian stable.
acl7225b.ko
addi_apci_035.ko
addi_apci_1032.ko
addi_apci_1500.ko
addi_apci_1516.ko
addi_apci_1564.ko
addi_apci_16xx.ko
addi_apci_2016.ko
addi_apci_2032.ko
addi_apci_2200.ko
addi_apci_3001.ko
addi_apci_3120.ko
addi_apci_3501.ko
addi_apci_3xxx.ko
adl_pci6208.ko
adl_pci7296.ko
adl_pci7432.ko
adl_pci8164.ko
adl_pci9111.ko
adl_pci9118.ko
adq12b.ko
adv_pci1710.ko
adv_pci1723.ko
adv_pci_dio.ko
aio_aio12_8.ko
aio_iiro_16.ko
amplc_dio200.ko
amplc_pc236.ko
amplc_pc263.ko
amplc_pci224.ko
amplc_pci230.ko
c6xdigio.ko
cb_das16_cs.ko
cb_pcidas64.ko
cb_pcidas.ko
cb_pcidda.ko
cb_pcidio.ko
cb_pcimdas.ko
cb_pcimdda.ko
comedi_bond.ko
comedi_parport.ko
comedi_test.ko
contec_pci_dio.ko
daqboard2000.ko
das08_cs.ko
das08.ko
das16.ko
das16m1.ko
das1800.ko
das6402.ko
das800.ko
dmm32at.ko
dt2801.ko
dt2811.ko
dt2814.ko
dt2815.ko
dt2817.ko
dt282x.ko
dt3000.ko
dt9812.ko
fl512.ko
gsc_hpdi.ko
icp_multi.ko
ii_pci20kc.ko
jr3_pci.ko
ke_counter.ko
me4000.ko
me_daq.ko
mpc624.ko
multiq3.ko
ni_6527.ko
ni_65xx.ko
ni_660x.ko
ni_670x.ko
ni_at_a2150.ko
ni_at_ao.ko
ni_atmio16d.ko
ni_atmio.ko
ni_daq_700.ko
ni_daq_dio24.ko
ni_labpc_cs.ko
ni_labpc.ko
ni_mio_cs.ko
ni_pcidio.ko
pcl711.ko
pcl724.ko
pcl725.ko
pcl726.ko
pcl730.ko
pcl812.ko
pcl816.ko
pcl818.ko
pcm3724.ko
pcm3730.ko
pcmad.ko
pcmda12.ko
pcmmio.ko
pcmuio.ko
poc.ko
quatech_daqp_cs.ko
rtd520.ko
rti800.ko
rti802.ko
s526.ko
s626.ko
serial2002.ko
skel.ko
ssv_dnp.ko
unioxx5.ko
usbduxfast.ko
usbdux.ko
vmk80xx.ko



-- Package-specific info:
** Version:
Linux version 3.0.0-rc6-686-pae (Debian 3.0.0~rc6-1~experimental.1)
(maks@debian.org) (gcc version 4.4.6 (Debian 4.4.6-6) ) #1 SMP Wed Jul
6 16:49:19 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-3.0.0-rc6-686-pae root=/dev/mapper/waterfall-root ro quiet

** Not tainted

** Kernel log:
[ * *2.457358] usb usb2: Product: UHCI Host Controller
[ * *2.457364] usb usb2: Manufacturer: Linux 3.0.0-rc6-686-pae uhci_hcd
[ * *2.457370] usb usb2: SerialNumber: 0000:00:07.3
[ * *2.457819] hub 2-0:1.0: USB hub found
[ * *2.457840] hub 2-0:1.0: 2 ports detected
[ * *2.494274] libata version 3.00 loaded.
[ * *2.495622] pata_via 0000:00:07.1: version 0.3.4
[ * *2.528202] scsi0 : pata_via
[ * *2.528708] scsi1 : pata_via
[ * *2.528877] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ * *2.528888] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ * *2.696908] ata1.00: ATA-4: QUANTUM FIREBALLlct10 20, A03.0900, max UDMA/66
[ * *2.696924] ata1.00: 39876480 sectors, multi 16: LBA
[ * *2.712965] ata1.00: configured for UDMA/66
[ * *2.713508] scsi 0:0:0:0: Direct-Access * * ATA * * *QUANTUM
FIREBALL A03. PQ: 0 ANSI: 5
[ * *2.768228] usb 1-1: new low speed USB device number 2 using uhci_hcd
[ * *2.868636] ata2.01: ATAPI: Lite-On LTN483S 48x Max, PD02, max
UDMA/33, CDB intr
[ * *2.876508] ata2.01: configured for UDMA/33
[ * *2.877629] scsi 1:0:1:0: CD-ROM * * * * * *Lite-On *LTN483S 48x
Max *PD02 PQ: 0 ANSI: 5
[ * *2.882709] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ * *2.882811] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not
an 8139C+ compatible chip, use 8139too
[ * *2.895204] 8139too: 8139too Fast Ethernet driver 0.9.28
[ * *2.896401] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ * *2.896412] PCI: setting IRQ 11 as level-triggered
[ * *2.896431] 8139too 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 11
(level, low) -> IRQ 11
[ * *2.898242] 8139too 0000:00:0d.0: eth0: RealTek RTL8139 at 0xe800,
00:01:29:d1:d5:51, IRQ 11
[ * *2.947304] usb 1-1: New USB device found, idVendor=046d, idProduct=c31c
[ * *2.947318] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ * *2.947327] usb 1-1: Product: USB Keyboard
[ * *2.947332] usb 1-1: Manufacturer: Logitech
[ * *2.949385] sd 0:0:0:0: [sda] 39876480 512-byte logical blocks:
(20.4 GB/19.0 GiB)
[ * *2.949606] sd 0:0:0:0: [sda] Write Protect is off
[ * *2.949618] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ * *2.949718] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ * *2.952975] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ * *2.952992] cdrom: Uniform CD-ROM driver Revision: 3.20
[ * *2.953534] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ * *2.978179] *sda: sda1 sda2 < sda5 >
[ * *2.979497] sd 0:0:0:0: [sda] Attached SCSI disk
[ * *3.056201] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ * *3.064202] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ * *3.128287] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/input/input0
[ * *3.131238] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID
v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:07.2-1/input0
[ * *3.173169] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.1/input/input1
[ * *3.173834] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID
v1.10 Device [Logitech USB Keyboard] on usb-0000:00:07.2-1/input1
[ * *3.175204] usbcore: registered new interface driver usbhid
[ * *3.175221] usbhid: USB HID core driver
[ * *3.636197] device-mapper: uevent: version 1.0.3
[ * *3.638963] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
initialised: dm-devel@redhat.com
[ * *4.341560] PM: Starting manual resume from disk
[ * *4.341583] PM: Hibernation image partition 254:1 present
[ * *4.341589] PM: Looking for hibernation image.
[ * *4.342532] PM: Image not found (code -22)
[ * *4.342542] PM: Hibernation image not present or could not be loaded.
[ * *4.381080] EXT3-fs: barriers not enabled
[ * *4.394734] kjournald starting. *Commit interval 5 seconds
[ * *4.394828] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ * *6.627825] udevd[222]: starting version 171
[ * *7.111407] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ * *7.111434] ACPI: Power Button [PWRB]
[ * *7.111606] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ * *7.111620] ACPI: Sleep Button [SLPB]
[ * *7.111822] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ * *7.125941] ACPI: Power Button [PWRF]
[ * *7.129587] ACPI: acpi_idle registered with cpuidle
[ * *7.129755] Marking TSC unstable due to TSC halts in idle
[ * *7.147868] Switching to clocksource acpi_pm
[ * *7.226816] parport_pc: VIA 686A/8231 detected
[ * *7.226828] parport_pc: probing current configuration
[ * *7.226851] parport_pc: Current parallel port base: 0x378
[ * *7.226911] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ * *7.325217] parport_pc: VIA parallel port: io=0x378, irq=7
[ * *7.444973] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ * *7.538575] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ * *7.683780] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ * *8.138036] Error: Driver 'pcspkr' is already registered, aborting...
[ * *8.369177] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ * *8.369190] PCI: setting IRQ 10 as level-triggered
[ * *8.369209] VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] ->
GSI 10 (level, low) -> IRQ 10
[ * *8.369388] VIA 82xx Audio 0000:00:07.5: setting latency timer to 64
[ * 10.153202] EXT3-fs (dm-0): using internal journal
[ * 10.507754] loop: module loaded
[ * 12.376953] Adding 733180k swap on /dev/mapper/waterfall-swap_1.
Priority:-1 extents:1 across:733180k
[ * 15.483193] EXT3-fs: barriers not enabled
[ * 15.501982] kjournald starting. *Commit interval 5 seconds
[ * 15.502791] EXT3-fs (dm-5): using internal journal
[ * 15.502814] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ * 15.675306] EXT3-fs: barriers not enabled
[ * 15.747525] kjournald starting. *Commit interval 5 seconds
[ * 15.748207] EXT3-fs (dm-4): using internal journal
[ * 15.748229] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ * 15.789511] EXT3-fs: barriers not enabled
[ * 15.798512] kjournald starting. *Commit interval 5 seconds
[ * 15.799201] EXT3-fs (dm-2): using internal journal
[ * 15.799222] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ * 15.829230] EXT3-fs: barriers not enabled
[ * 15.836862] kjournald starting. *Commit interval 5 seconds
[ * 15.837550] EXT3-fs (dm-3): using internal journal
[ * 15.837571] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ * 18.514657] 8139too 0000:00:0d.0: eth0: link up, 100Mbps,
full-duplex, lpa 0x45E1

** Model information
not available

** Loaded modules:
Module * * * * * * * * *Size *Used by
ext2 * * * * * * * * * 53488 *1
loop * * * * * * * * * 17777 *0
snd_via82xx * * * * * *22562 *0
gameport * * * * * * * 13332 *1 snd_via82xx
snd_ac97_codec * * * * 83732 *1 snd_via82xx
ac97_bus * * * * * * * 12462 *1 snd_ac97_codec
snd_mpu401_uart * * * *13299 *1 snd_via82xx
joydev * * * * * * * * 16906 *0
via686a * * * * * * * *13085 *0
snd_pcm * * * * * * * *52731 *2 snd_via82xx,snd_ac97_codec
snd_rawmidi * * * * * *18311 *1 snd_mpu401_uart
evdev * * * * * * * * *17180 *5
snd_timer * * * * * * *22171 *1 snd_pcm
serio_raw * * * * * * *12758 *0
snd_seq_device * * * * 12995 *1 snd_rawmidi
snd * * * * * * * * * *38255 *7
snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_pcm ,snd_rawmidi,snd_timer,snd_seq_device
snd_page_alloc * * * * 12841 *2 snd_via82xx,snd_pcm
soundcore * * * * * * *12878 *1 snd
pcspkr * * * * * * * * 12515 *0
i2c_viapro * * * * * * 12451 *0
shpchp * * * * * * * * 26653 *0
i2c_core * * * * * * * 19022 *1 i2c_viapro
pci_hotplug * * * * * *26303 *1 shpchp
parport_pc * * * * * * 21895 *0
parport * * * * * * * *27018 *1 parport_pc
processor * * * * * * *26983 *1
button * * * * * * * * 12783 *0
thermal_sys * * * * * *17667 *1 processor
ext3 * * * * * * * * *102125 *5
jbd * * * * * * * * * *40818 *1 ext3
mbcache * * * * * * * *12810 *2 ext2,ext3
dm_mod * * * * * * * * 56387 *18
usbhid * * * * * * * * 35206 *0
hid * * * * * * * * * *63937 *1 usbhid
sg * * * * * * * * * * 21385 *0
sd_mod * * * * * * * * 35060 *3
sr_mod * * * * * * * * 17418 *0
crc_t10dif * * * * * * 12332 *1 sd_mod
cdrom * * * * * * * * *34631 *1 sr_mod
8139too * * * * * * * *21937 *0
8139cp * * * * * * * * 21974 *0
ata_generic * * * * * *12439 *0
mii * * * * * * * * * *12595 *2 8139too,8139cp
pata_via * * * * * * * 12733 *2
libata * * * * * * * *132136 *2 ata_generic,pata_via
uhci_hcd * * * * * * * 26153 *0
ehci_hcd * * * * * * * 34885 *0
floppy * * * * * * * * 47893 *0
usbcore * * * * * * * 103321 *4 usbhid,uhci_hcd,ehci_hcd
scsi_mod * * * * * * *134491 *4 sg,sr_mod,sd_mod,libata

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
* *link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
* *inet 127.0.0.1/8 scope host lo
* *inet6 ::1/128 scope host
* * * valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UNKNOWN qlen 1000
* *link/ether 00:01:29:d1:d5:51 brd ff:ff:ff:ff:ff:ff
* *inet 192.168.0.181/24 brd 192.168.0.255 scope global eth0
* *inet6 2001:1938:145:0:201:29ff:fed1:d551/64 scope global dynamic
* * * valid_lft 86020sec preferred_lft 14020sec
* *inet6 fe80::201:29ff:fed1:d551/64 scope link
* * * valid_lft forever preferred_lft forever

*** Device statistics:
Inter-| * Receive * * * * * * * * * * * * * * * * * * * * * * * *| *Transmit
*face |bytes * *packets errs drop fifo frame compressed
multicast|bytes * *packets errs drop fifo colls carrier compressed
* *lo: * * 560 * * * 8 * *0 * *0 * *0 * * 0 * * * * *0 * * * * 0
560 * * * 8 * *0 * *0 * *0 * * 0 * * * 0 * * * * *0
*eth0: *288487 * *3226 * *0 * *0 * *0 * * 0 * * * * *0 * * * * 0
1107253 * *2509 * *0 * *0 * *0 * * 0 * * * 0 * * * * *0

*** Protocol statistics:
Ip:
* *3117 total packets received
* *2 with invalid addresses
* *0 forwarded
* *0 incoming packets discarded
* *3115 incoming packets delivered
* *2469 requests sent out
Icmp:
* *0 ICMP messages received
* *0 input ICMP message failed.
* *ICMP input histogram:
* *0 ICMP messages sent
* *0 ICMP messages failed
* *ICMP output histogram:
Tcp:
* *3 active connections openings
* *2 passive connection openings
* *0 failed connection attempts
* *0 connection resets received
* *2 connections established
* *3072 segments received
* *2464 segments send out
* *0 segments retransmited
* *0 bad segments received.
* *3 resets sent
Udp:
* *28 packets received
* *0 packets to unknown port received.
* *0 packet receive errors
* *28 packets sent
UdpLite:
TcpExt:
* *1 TCP sockets finished time wait in fast timer
* *12 delayed acks sent
* *4 packets directly queued to recvmsg prequeue.
* *781 packet headers predicted
* *141 acknowledgments not containing data payload received
* *1817 predicted acknowledgments
IpExt:
* *InBcastPkts: 34
* *InOctets: 230036
* *OutOctets: 1068460
* *InBcastOctets: 7034

*** Device features:
eth0: 0x40004829
lo: 0xa01b7c65

** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8601 [Apollo
ProMedia] [1106:0601] (rev 05)
* * * *Subsystem: VIA Technologies, Inc. VT8601 [Apollo ProMedia] [1106:0601]
* * * *Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
* * * *Latency: 8
* * * *Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
* * * *Capabilities: [a0] AGP version 2.0
* * * * * * * *Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
* * * * * * * *Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
* * * *Kernel driver in use: agpgart-via

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8601 [Apollo
ProMedia AGP] [1106:8601] (prog-if 00 [Normal decode])
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+ INTx-
* * * *Latency: 0
* * * *Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
* * * *Memory behind bridge: ec000000-ed7fffff
* * * *Prefetchable memory behind bridge: 18000000-180fffff
* * * *Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
* * * *BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
* * * * * * * *PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
* * * *Capabilities: [80] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo
Super South] [1106:0686] (rev 40)
* * * *Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
[1106:0000]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 0
* * * *Capabilities: [c0] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Kernel driver in use: parport_pc

00:07.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571]
(rev 06) (prog-if 8a [Master SecP PriP])
* * * *Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
[1106:0571]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32
* * * *Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [size=8]
* * * *Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [size=1]
* * * *Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [size=8]
* * * *Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [size=1]
* * * *Region 4: I/O ports at e000 [size=16]
* * * *Capabilities: [c0] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Kernel driver in use: pata_via

00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 1a) (prog-if 00 [UHCI])
* * * *Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32, Cache Line Size: 32 bytes
* * * *Interrupt: pin D routed to IRQ 12
* * * *Region 4: I/O ports at e100 [size=32]
* * * *Capabilities: [80] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Kernel driver in use: uhci_hcd

00:07.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 1a) (prog-if 00 [UHCI])
* * * *Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32, Cache Line Size: 32 bytes
* * * *Interrupt: pin D routed to IRQ 12
* * * *Region 4: I/O ports at e200 [size=32]
* * * *Capabilities: [80] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Kernel driver in use: uhci_hcd

00:07.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super
ACPI] [1106:3057] (rev 40)
* * * *Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
[1106:3057]
* * * *Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Interrupt: pin ? routed to IRQ 9
* * * *Capabilities: [68] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:07.5 Multimedia audio controller [0401]: VIA Technologies, Inc.
VT82C686 AC97 Audio Controller [1106:3058] (rev 50)
* * * *Subsystem: VIA Technologies, Inc. VT82C686 AC97 Audio
Controller [1106:3058]
* * * *Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Interrupt: pin C routed to IRQ 10
* * * *Region 0: I/O ports at e300 [size=256]
* * * *Region 1: I/O ports at e400 [size=4]
* * * *Region 2: I/O ports at e500 [size=4]
* * * *Capabilities: [c0] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Kernel driver in use: VIA 82xx Audio

00:0a.0 Unassigned class [ff00]: National Instruments PCI-6503 [1093:17d0]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32, Cache Line Size: 32 bytes
* * * *Interrupt: pin A routed to IRQ 5
* * * *Region 0: Memory at ed811000 (32-bit, non-prefetchable) [size=4K]
* * * *Region 1: Memory at ed810000 (32-bit, non-prefetchable) [size=4K]

00:0b.0 Communication controller [0780]: Conexant Systems, Inc. HCF
56k Data/Fax/Voice/Spkp Modem [14f1:1036] (rev 08)
* * * *Subsystem: Conexant Systems, Inc. HCF 56k Data/Fax/Voice/Spkp
Modem [14f1:1036]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32
* * * *Interrupt: pin A routed to IRQ 10
* * * *Region 0: Memory at ed800000 (32-bit, non-prefetchable) [size=64K]
* * * *Region 1: I/O ports at e700 [size=8]
* * * *Capabilities: [40] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
* * * *Subsystem: DFI Inc Device [15bd:1003]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
* * * *Latency: 32 (8000ns min, 16000ns max)
* * * *Interrupt: pin A routed to IRQ 11
* * * *Region 0: I/O ports at e800 [size=256]
* * * *Region 1: Memory at ed812000 (32-bit, non-prefetchable) [size=256]
* * * *Capabilities: [50] Power Management version 2
* * * * * * * *Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
* * * *Kernel driver in use: 8139too

01:00.0 VGA compatible controller [0300]: Trident Microsystems
CyberBlade/i1 [1023:8500] (rev 6a) (prog-if 00 [VGA controller])
* * * *Subsystem: Trident Microsystems CyberBlade/i1 [1023:8500]
* * * *Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
* * * *Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
* * * *Latency: 32
* * * *Interrupt: pin A routed to IRQ 11
* * * *Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=8M]
* * * *Region 1: Memory at ed000000 (32-bit, non-prefetchable) [size=128K]
* * * *Region 2: Memory at ec800000 (32-bit, non-prefetchable) [size=8M]
* * * *[virtual] Expansion ROM at 18000000 [disabled] [size=64K]
* * * *Capabilities: [80] AGP version 2.0
* * * * * * * *Status: RQ=33 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
* * * * * * * *Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
* * * *Capabilities: [90] Power Management version 1
* * * * * * * *Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
* * * * * * * *Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-


** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business


-- System Information:
Debian Release: wheezy/sid
*APT prefers unstable
*APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.0.0-rc6-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.0.0-rc6-686-pae depends on:
ii *debconf [debconf-2.0] * * * * 1.5.40 * * Debian configuration management sy
ii *initramfs-tools [linux-initra 0.99 * * * tools for generating an initramfs
ii *linux-base * * * * * * * * * *3.3 * * * *Linux image base package
ii *module-init-tools * * * * * * 3.16-1 * * tools for managing Linux kernel mo

Versions of packages linux-image-3.0.0-rc6-686-pae recommends:
ii *firmware-linux-free * * * * * 3 * * * * *Binary firmware for various driver
ii *libc6-i686 * * * * * * * * * *2.13-10 * *Embedded GNU C Library: Shared lib

Versions of packages linux-image-3.0.0-rc6-686-pae suggests:
ii *grub-pc * * * * * * * * * * * 1.99-8 * * GRand Unified Bootloader, version
pn *linux-doc-3.0.0 * * * * * * * <none> * * (no description available)

Versions of packages linux-image-3.0.0-rc6-686-pae is related to:
pn *firmware-bnx2 * * * * * * * * <none> * * (no description available)
pn *firmware-bnx2x * * * * * * * *<none> * * (no description available)
pn *firmware-ipw2x00 * * * * * * *<none> * * (no description available)
pn *firmware-ivtv * * * * * * * * <none> * * (no description available)
pn *firmware-iwlwifi * * * * * * *<none> * * (no description available)
pn *firmware-linux * * * * * * * *<none> * * (no description available)
pn *firmware-linux-nonfree * * * *<none> * * (no description available)
pn *firmware-qlogic * * * * * * * <none> * * (no description available)
pn *firmware-ralink * * * * * * * <none> * * (no description available)
pn *xen-hypervisor * * * * * * * *<none> * * (no description available)

-- debconf information:
*linux-image-3.0.0-rc6-686-pae/postinst/ignoring-ramdisk:
*linux-image-3.0.0-rc6-686-pae/postinst/depmod-error-initrd-3.0.0-rc6-686-pae:
false
*linux-image-3.0.0-rc6-686-pae/prerm/removing-running-kernel-3.0.0-rc6-686-pae:
true
*linux-image-3.0.0-rc6-686-pae/postinst/missing-firmware-3.0.0-rc6-686-pae:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: CAGQBgOXSV3c-XUUYk4QtVD9iFCvsYzNX5isMhiyJQ5xsBo6CpA@mail.gmail. com">http://lists.debian.org/CAGQBgOXSV3c-XUUYk4QtVD9iFCvsYzNX5isMhiyJQ5xsBo6CpA@mail.gmail. com
 
Old 07-12-2011, 06:15 AM
Ben Hutchings
 
Default Bug#633516: linux-image-3.0.0-rc6-686-pae: comedi modules missing 3.0-rc6

On Sun, 2011-07-10 at 22:36 -0500, Brandon Coleman wrote:
> Package: linux-2.6
> Version: 3.0.0~rc6-1~experimental.1
> Severity: normal
>
> The following Comedi modules are in the stable Kernel, but are not in
> 3.0rc6. Adding these modules will allow continued Comedi operation in
> the next Debian stable.
[...]

This was due to an upstream change in the way comedi drivers are
selected. I will re-enable the same drivers that we have in stable.

Ben.

--
Ben Hutchings
All extremists should be taken out and shot.
 

Thread Tools




All times are GMT. The time now is 12:22 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org