FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 06-21-2011, 12:41 PM
Finn
 
Default Bug#631199: linux-image-2.6.39-2-amd64: comedi modules are missing

Package: linux-2.6
Version: 2.6.39-2
Severity: normal
Tags: wheezy

All hardware specific modules for comedi are missing which makes comedi
unusable. Comedi-Source is no longer available as the modules should be in
Kernel and they were in 2.6.32-5-amd64. (see http://bugs.debian.org/cgi-
bin/bugreport.cgi?bug=622339)



-- Package-specific info:
** Version:
Linux version 2.6.39-2-amd64 (Debian 2.6.39-2) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:01:04 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-amd64 root=UUID=42334f33-f75e-4105-a2b4-6677d2e4ef56 ro quiet

** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.

** Kernel log:
[ 4.528627] usbcore: registered new interface driver usbhid
[ 4.528629] usbhid: USB HID core driver
[ 5.029673] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 5.030164] scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 5.030663] scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 5.031161] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
[ 5.031533] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 5.031701] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 5.031834] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 5.031984] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 5.037762] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 5.038390] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 5.039009] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 5.047117] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 5.098153] EXT3-fs: barriers not enabled
[ 5.105049] kjournald starting. Commit interval 5 seconds
[ 5.105080] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 6.002765] udevd[384]: starting version 171
[ 6.424534] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.424538] ACPI: Power Button [PWRB]
[ 6.424575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.424577] ACPI: Power Button [PWRF]
[ 6.461463] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.547895] EDAC MC: Ver: 2.1.0 Jun 8 2011
[ 6.574819] EDAC i7core: Driver loaded.
[ 6.607703] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.613944] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.656610] Disabling lock debugging due to kernel taint
[ 6.768318] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.782185] comedi: version 0.7.76 - http://www.comedi.org
[ 6.827092] ACPI: acpi_idle registered with cpuidle
[ 7.155129] Available NI device IDs: 0x717f
[ 7.189010] comedi0: ni_pcimio: pcie-6259
[ 7.189031] ni_pcimio 0000:02:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 7.189050] MITE:0xf9fff000 mapped to ffffc900117aa000 DAQ:0xf9ffe000 mapped to ffffc900117ae000
[ 7.189059] mite: version = 1, type = 4, mite mode = 1, interface mode = 3
[ 7.189060] mite: num channels = 8, write post fifo depth = 1, wins = 0, iowins = 2
[ 7.189067] mite: fifo size is 64.
[ 7.210355] ( irq = 28 )
[ 7.281094] nvidia: module license 'NVIDIA' taints kernel.
[ 7.529122] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.529166] HDA Intel 0000:00:1b.0: irq 69 for MSI/MSI-X
[ 7.529187] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.730499] nvidia 0000:03:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 7.730504] nvidia 0000:03:00.0: setting latency timer to 64
[ 7.730508] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=nonew ns=io+mem
[ 7.730620] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.19 Mon May 16 23:32:08 PDT 2011
[ 7.746407] hda_codec: ALC1200: BIOS auto-probing.
[ 7.747779] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 7.751080] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.751164] HDA Intel 0000:03:00.1: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 7.751167] hda_intel: Disable MSI for Nvidia chipset
[ 7.751198] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 7.843790] usbcore: registered new interface driver usbserial
[ 7.843799] USB Serial support registered for generic
[ 7.843835] usbcore: registered new interface driver usbserial_generic
[ 7.843837] usbserial: USB Serial Driver core
[ 7.852280] USB Serial support registered for cp210x
[ 7.852294] cp210x 4-1:1.0: cp210x converter detected
[ 7.961803] usb 4-1: reset full speed USB device number 2 using uhci_hcd
[ 8.108743] usb 4-1: cp210x converter now attached to ttyUSB0
[ 8.108764] usbcore: registered new interface driver cp210x
[ 8.108766] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[ 10.305051] Adding 1614496k swap on /dev/sda5. Priority:-1 extents:1 across:1614496k
[ 10.387779] EXT3-fs (sda3): using internal journal
[ 10.473618] loop: module loaded
[ 11.505922] EXT3-fs: barriers not enabled
[ 11.506048] kjournald starting. Commit interval 5 seconds
[ 11.506381] EXT3-fs (sdb2): using internal journal
[ 11.506386] EXT3-fs (sdb2): mounted filesystem with ordered data mode
[ 14.653351] RPC: Registered udp transport module.
[ 14.653353] RPC: Registered tcp transport module.
[ 14.653355] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.684210] FS-Cache: Loaded
[ 14.709737] FS-Cache: Netfs 'nfs' registered for caching
[ 14.727195] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.256231] fuse init (API version 7.16)
[ 17.123299] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 17.431611] r8169 0000:06:00.0: eth0: link down
[ 17.431617] r8169 0000:06:00.0: eth0: link down
[ 17.432154] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.809534] Bluetooth: Core ver 2.16
[ 18.809554] NET: Registered protocol family 31
[ 18.809556] Bluetooth: HCI device and connection manager initialized
[ 18.809558] Bluetooth: HCI socket layer initialized
[ 18.809559] Bluetooth: L2CAP socket layer initialized
[ 18.809589] Bluetooth: SCO socket layer initialized
[ 18.835268] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.835270] Bluetooth: BNEP filters: protocol multicast
[ 18.959811] Bluetooth: RFCOMM TTY layer initialized
[ 18.959816] Bluetooth: RFCOMM socket layer initialized
[ 18.959817] Bluetooth: RFCOMM ver 1.11
[ 19.025855] lp: driver loaded but no devices found
[ 19.133306] ppdev: user-space parallel port driver
[ 19.522540] sshd (1983): /proc/1983/oom_adj is deprecated, please use /proc/1983/oom_score_adj instead.
[ 19.534132] r8169 0000:06:00.0: eth0: link up
[ 19.534668] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.487020] eth0: no IPv6 routers present
[ 148.743002] FS-Cache: Netfs 'cifs' registered for caching
[ 148.773865] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 2.6.41

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0808
board_vendor: ASUSTeK Computer INC.
board_name: P6T SE
board_version: Rev 1.xx

** Loaded modules:
Module Size Used by
md4 12529 0
hmac 12753 1
nls_utf8 12456 2
cifs 236005 3
parport_pc 22191 0
ppdev 12725 0
lp 17190 0
rfcomm 32744 0
parport 31650 3 parport_pc,ppdev,lp
bnep 17424 2
bluetooth 107224 10 rfcomm,bnep
acpi_cpufreq 12849 1
mperf 12411 1 acpi_cpufreq
cpufreq_stats 12713 0
cpufreq_powersave 12454 0
rfkill 19014 2 bluetooth
crc16 12343 1 bluetooth
cpufreq_conservative 13147 0
cpufreq_userspace 12576 0
binfmt_misc 12914 1
uinput 17392 1
fuse 61554 1
nfsd 258506 2
nfs 251154 0
lockd 70844 2 nfsd,nfs
fscache 36071 2 cifs,nfs
auth_rpcgss 36788 2 nfsd,nfs
nfs_acl 12511 2 nfsd,nfs
sunrpc 162130 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
loop 22479 0
firewire_sbp2 17825 0
snd_hda_codec_hdmi 22174 4
cp210x 21121 0
usbserial 31986 1 cp210x
snd_hda_codec_realtek 283734 1
snd_hda_intel 25946 5
snd_hda_codec 67865 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel
nvidia 10487443 30
snd_hwdep 13148 1 snd_hda_codec
snd_pcm 67276 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq 44678 0
snd_timer 22658 2 snd_pcm,snd_seq
snd_seq_device 13155 1 snd_seq
snd 52324 19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_t imer,snd_seq_device
ni_pcimio 57650 0
ni_tiocmd 12832 1 ni_pcimio
comedi_fc 12592 1 ni_pcimio
mite 13418 2 ni_pcimio,ni_tiocmd
soundcore 13014 1 snd
processor 27431 1 acpi_cpufreq
8255 12948 1 ni_pcimio
comedi 40253 5 ni_pcimio,ni_tiocmd,comedi_fc,mite,8255
i2c_i801 16870 0
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
ni_tio 17209 2 ni_pcimio,ni_tiocmd
shpchp 31221 0
pci_hotplug 26711 1 shpchp
i7core_edac 18121 0
thermal_sys 17939 1 processor
edac_core 35344 1 i7core_edac
i2c_core 23766 2 nvidia,i2c_i801
asus_atk0110 17276 0
evdev 17475 9
pcspkr 12579 0
psmouse 55199 0
serio_raw 12878 0
button 12895 0
ext3 112254 2
jbd 41698 1 ext3
mbcache 12930 1 ext3
sg 25769 0
usbhid 39946 0
hid 72745 1 usbhid
sd_mod 35644 5
sr_mod 21824 0
cdrom 35134 1 sr_mod
usb_storage 43639 0
crc_t10dif 12348 1 sd_mod
uas 13151 0
uhci_hcd 26290 0
ahci 25089 3
libahci 22616 1 ahci
libata 151572 2 ahci,libahci
scsi_mod 161557 7 firewire_sbp2,sg,sr_mod,sd_mod,usb_storage,uas,lib ata
firewire_ohci 35027 0
firewire_core 47790 2 firewire_sbp2,firewire_ohci
ehci_hcd 39487 0
usbcore 127203 8 cp210x,usbserial,usbhid,usb_storage,uas,uhci_hcd,e hci_hcd
r8169 37356 0
crc_itu_t 12347 1 firewire_core
mii 12675 1 r8169

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13)
Subsystem: ASUSTeK Computer Inc. Device [1043:836b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Memory behind bridge: f9f00000-f9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fa000000-fbcfffff
Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: i7core_edac

00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:14.3 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at a800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at a880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at ac00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9eff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:8357]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 69
Region 0: Memory at f9ef8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0200000-c05fffff
Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 [8086:3a44] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000f8e00000-00000000f8efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 [8086:3a46] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at a080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at a400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at a480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9efe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 68
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9880 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9480 [size=4]
Region 4: I/O ports at 9400 [size=32]
Region 5: Memory at f9efc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9efd000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus

01:00.0 PCI bridge [0604]: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge [104c:8231] (rev 03) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
Memory behind bridge: f9f00000-f9ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

02:00.0 Unassigned class [ff00]: National Instruments PCIe-6259 [1093:717f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f9fff000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ni_pcimio

03:00.0 VGA compatible controller [0300]: nVidia Corporation GT216 [GeForce GT 220] [10de:0a20] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Device [196e:0699]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at bc00 [size=128]
[virtual] Expansion ROM at fbc00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia

03:00.1 Audio device [0403]: nVidia Corporation High Definition Audio Controller [10de:0be2] (rev a1)
Subsystem: Device [196e:0699]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fbcfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

05:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8384]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbdff000 (64-bit, non-prefetchable) [size=2K]
Region 2: I/O ports at c800 [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 67
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at fbeff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f8ef0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169

08:00.0 Serial controller [0700]: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) [1409:7168] (rev 01) (prog-if 02 [16550])
Subsystem: Timedia Technology Co Ltd SER4037A (2x RS232 port) [1409:4037]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ec00 [size=32]
Kernel driver in use: serial


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 004 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
Bus 004 Device 003: ID 03eb:2104 Atmel Corp. AVR ISP mkII
Bus 007 Device 002: ID 10c4:80c4 Cygnal Integrated Products, Inc.
Bus 008 Device 002: ID 046a:0011 Cherry GmbH G83 (RS 6000) Keyboard
Bus 008 Device 003: ID 046d:c05b Logitech, Inc.


-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.39-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.39-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.39-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver

Versions of packages linux-image-2.6.39-2-amd64 suggests:
ii grub-pc 1.99-6 GRand Unified Bootloader, version
pn linux-doc-2.6.39 <none> (no description available)

Versions of packages linux-image-2.6.39-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.39-2-amd64/postinst/ignoring-ramdisk:
linux-image-2.6.39-2-amd64/postinst/missing-firmware-2.6.39-2-amd64:
linux-image-2.6.39-2-amd64/postinst/depmod-error-initrd-2.6.39-2-amd64: false
linux-image-2.6.39-2-amd64/prerm/removing-running-kernel-2.6.39-2-amd64: true



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110621124132.2950.26220.reportbug@localhost">htt p://lists.debian.org/20110621124132.2950.26220.reportbug@localhost
 
Old 06-21-2011, 12:54 PM
maximilian attems
 
Default Bug#631199: linux-image-2.6.39-2-amd64: comedi modules are missing

On Tue, Jun 21, 2011 at 02:41:32PM +0200, Finn wrote:
> Package: linux-2.6
> Version: 2.6.39-2
> Severity: normal
> Tags: wheezy
>
> All hardware specific modules for comedi are missing which makes comedi
> unusable. Comedi-Source is no longer available as the modules should be in
> Kernel and they were in 2.6.32-5-amd64. (see http://bugs.debian.org/cgi-
> bin/bugreport.cgi?bug=622339)

comedi is a staging driver, be more precise which comedi modules
you have an usage for and say also specific arch if not x86.

staging drivers will only be compiled on specific demand.

thank you
--
maks



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110621125418.GF14539@vostochny.stro.at">http://lists.debian.org/20110621125418.GF14539@vostochny.stro.at
 
Old 06-21-2011, 01:52 PM
Finn Hoffmann
 
Default Bug#631199: linux-image-2.6.39-2-amd64: comedi modules are missing

Modules are: ni_pcimio,ni_tiocmd,comedi_fc,mite,8255,ni_tio for National Instruments PCIe-6259
Arch is amd64

thx


Am 21.06.2011 14:54, schrieb maximilian attems:

On Tue, Jun 21, 2011 at 02:41:32PM +0200, Finn wrote:

Package: linux-2.6
Version: 2.6.39-2
Severity: normal
Tags: wheezy

All hardware specific modules for comedi are missing which makes comedi
unusable. Comedi-Source is no longer available as the modules should be in
Kernel and they were in 2.6.32-5-amd64. (see http://bugs.debian.org/cgi-
bin/bugreport.cgi?bug=622339)

comedi is a staging driver, be more precise which comedi modules
you have an usage for and say also specific arch if not x86.

staging drivers will only be compiled on specific demand.

Why?

thank you




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4E00A21A.40509@uni-bremen.de">http://lists.debian.org/4E00A21A.40509@uni-bremen.de
 
Old 06-21-2011, 02:29 PM
maximilian attems
 
Default Bug#631199: linux-image-2.6.39-2-amd64: comedi modules are missing

On Tue, Jun 21, 2011 at 03:52:26PM +0200, Finn Hoffmann wrote:
> Modules are: ni_pcimio,ni_tiocmd,comedi_fc,mite,8255,ni_tio for National Instruments PCIe-6259
> Arch is amd64

3.0-rc5 will have those added for x86:
+CONFIG_COMEDI_NI_COMMON=m
+CONFIG_COMEDI_NI_PCIMIO=m
+CONFIG_COMEDI_NI_TIO=m
+CONFIG_COMEDI_FC=m
+CONFIG_COMEDI_MITE=m
+CONFIG_COMEDI_8255=m

didn't find that tiocmd thingy.


thanks

--
maks



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110621142909.GG14539@vostochny.stro.at">http://lists.debian.org/20110621142909.GG14539@vostochny.stro.at
 

Thread Tools




All times are GMT. The time now is 05:16 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org