Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#629259: ATI RADEON 9200 freezes on Squeeze with firmware-linux-nonfree (http://www.linux-archive.org/debian-kernel/535201-bug-629259-ati-radeon-9200-freezes-squeeze-firmware-linux-nonfree.html)

burek pekaric 06-05-2011 12:46 AM

Bug#629259: ATI RADEON 9200 freezes on Squeeze with firmware-linux-nonfree
 
Package: firmware-linux-nonfree
Severity: critical
Justification: breaks the whole system

I'm trying for several days to get my display up and running on fresh install
of Debian Squeeze. I was looking to find the original drivers from the OEM here
http://support.amd.com/us/gpudownload/Pages/linux64-radeon-prer200.aspx but
there are just .rpm packages so I've checked here
http://wiki.debian.org/AtiHowTo in order to finally get my screen to display
more than a couple of colors, but..

After installing the package firmware-linux-nonfree and reboot, I couldn't even
get to the login screen, because display would stuck just before the background
image of the login screen was fully displayed (animated/faded out). The display
would just freeze and that's it. The mouse would respond for the next couple of
seconds and it would also die. From that moment on only physical reset button
could be of any help :(

Trying to figure out what the problem is (and how to stop loading of gnome to
have the simple shell login, so I can remove the package), I've found the key
combination Ctrl+Alt+F1 and Ctrl+Alt+Backspace. On next reboot I tried
constantly pressing these combinations and finally somehow I've got the console
login without GUI, which has let me to login just to show me the message like
this one (several seconds after the login): "... [drm:radeon_fence_wait]
*ERROR* fence(...) 510ms timeout going to reset GPU" and after that, again it
just froze.

I don't really know what is wrong here, maybe even I've made some wrong steps,
but this really influenced me to stop thinking about switching to Linux,
although I'd really like to give it a try and not give up this easy, but when
the most basic stuff can't work out-of-the-box (like the display driver) it
really makes me feel uncomfortable to proceed any further :/ No offence..

Is there any command I can type or anything I can do to give you a more
detailed report, so that this issue can be resolved?



-- System Information:
Debian Release: 6.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

firmware-linux-nonfree depends on no packages.

firmware-linux-nonfree recommends no packages.

Versions of packages firmware-linux-nonfree suggests:
ii initramfs-tools 0.98.8 tools for generating an initramfs
ii linux-image-2.6.32-5-6 2.6.32-34squeeze1 Linux 2.6.32 for modern PCs



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110605004605.3296.93254.reportbug@misko">http://lists.debian.org/20110605004605.3296.93254.reportbug@misko

Ben Hutchings 06-05-2011 02:49 AM

Bug#629259: ATI RADEON 9200 freezes on Squeeze with firmware-linux-nonfree
 
On Sun, 2011-06-05 at 02:46 +0200, burek pekaric wrote:
> Package: firmware-linux-nonfree
> Severity: critical
> Justification: breaks the whole system
>
> I'm trying for several days to get my display up and running on fresh install
> of Debian Squeeze. I was looking to find the original drivers from the OEM here
> http://support.amd.com/us/gpudownload/Pages/linux64-radeon-prer200.aspx but
> there are just .rpm packages so I've checked here
> http://wiki.debian.org/AtiHowTo in order to finally get my screen to display
> more than a couple of colors, but..
>
> After installing the package firmware-linux-nonfree and reboot, I couldn't even
> get to the login screen, because display would stuck just before the background
> image of the login screen was fully displayed (animated/faded out). The display
> would just freeze and that's it. The mouse would respond for the next couple of
> seconds and it would also die. From that moment on only physical reset button
> could be of any help :(
>
> Trying to figure out what the problem is (and how to stop loading of gnome to
> have the simple shell login, so I can remove the package), I've found the key
> combination Ctrl+Alt+F1 and Ctrl+Alt+Backspace.

You should boot to single-user mode. In the GRUB menu, this is labelled
as 'recovery mode'. If you use LILO, add an entry with 'append=single'.

> On next reboot I tried
> constantly pressing these combinations and finally somehow I've got the console
> login without GUI, which has let me to login just to show me the message like
> this one (several seconds after the login): "... [drm:radeon_fence_wait]
> *ERROR* fence(...) 510ms timeout going to reset GPU" and after that, again it
> just froze.

Please provide the complete messages.

> I don't really know what is wrong here, maybe even I've made some wrong steps,
> but this really influenced me to stop thinking about switching to Linux,
> although I'd really like to give it a try and not give up this easy, but when
> the most basic stuff can't work out-of-the-box (like the display driver) it
> really makes me feel uncomfortable to proceed any further :/ No offence..
>
> Is there any command I can type or anything I can do to give you a more
> detailed report, so that this issue can be resolved?

'lspci -vnn' would be helpful, in additional to the kernel log messages.

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

burek pekaric 06-05-2011 11:00 PM

Bug#629259: ATI RADEON 9200 freezes on Squeeze with firmware-linux-nonfree
 
On 06/05/2011 04:49 AM, Ben Hutchings wrote:

On Sun, 2011-06-05 at 02:46 +0200, burek pekaric wrote:

Package: firmware-linux-nonfree
Severity: critical
Justification: breaks the whole system

I'm trying for several days to get my display up and running on fresh install
of Debian Squeeze. I was looking to find the original drivers from the OEM here
http://support.amd.com/us/gpudownload/Pages/linux64-radeon-prer200.aspx but
there are just .rpm packages so I've checked here
http://wiki.debian.org/AtiHowTo in order to finally get my screen to display
more than a couple of colors, but..

After installing the package firmware-linux-nonfree and reboot, I couldn't even
get to the login screen, because display would stuck just before the background
image of the login screen was fully displayed (animated/faded out). The display
would just freeze and that's it. The mouse would respond for the next couple of
seconds and it would also die. From that moment on only physical reset button
could be of any help :(

Trying to figure out what the problem is (and how to stop loading of gnome to
have the simple shell login, so I can remove the package), I've found the key
combination Ctrl+Alt+F1 and Ctrl+Alt+Backspace.

You should boot to single-user mode. In the GRUB menu, this is labelled
as 'recovery mode'. If you use LILO, add an entry with 'append=single'.


On next reboot I tried
constantly pressing these combinations and finally somehow I've got the console
login without GUI, which has let me to login just to show me the message like
this one (several seconds after the login): "... [drm:radeon_fence_wait]
*ERROR* fence(...) 510ms timeout going to reset GPU" and after that, again it
just froze.

Please provide the complete messages.


I don't really know what is wrong here, maybe even I've made some wrong steps,
but this really influenced me to stop thinking about switching to Linux,
although I'd really like to give it a try and not give up this easy, but when
the most basic stuff can't work out-of-the-box (like the display driver) it
really makes me feel uncomfortable to proceed any further :/ No offence..

Is there any command I can type or anything I can do to give you a more
detailed report, so that this issue can be resolved?

'lspci -vnn' would be helpful, in additional to the kernel log messages.

Ben.



Hi,

1. Thanks for the tip for single user mode.
2. How to provide complete messages? What command should I type or what
log file should I attach?

3. Here is the output:

# lspci -vnn

00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)

Subsystem: ASUSTeK Computer Inc. Device [1043:8103]
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] Vendor Specific Information: Len=06 <?>
Capabilities: [a0] AGP version 3.0
Kernel driver in use: agpgart-intel

00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP
Controller [8086:2571] (rev 02) (prog-if 00 [Normal decode])

Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe100000-fe1fffff
Prefetchable memory behind bridge: bff00000-dfefffff

00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P
Processor to I/O Memory Interface [8086:2576] (rev 02)

Flags: fast devsel
Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]

00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]

Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ef00 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]

Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ef20 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]

Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ef40 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]

Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ef80 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]

Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev c2) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe200000-feafffff

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)

Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]

Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at fc00 [size=16]
Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)

Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard [1043:80a6]
Flags: medium devsel, IRQ 17
I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)

Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard [1043:80f3]
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at e800 [size=256]
I/O ports at ee80 [size=64]
Memory at febff800 (32-bit, non-prefetchable) [size=512]
Memory at febff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: Intel ICH

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280
[Radeon 9200] [1002:5961] (rev 01) (prog-if 00 [VGA controller])

Subsystem: C.P. Technology Co. Ltd Device [148c:2063]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at d0000000 (32-bit, prefetchable) [size=128M]
I/O ports at c000 [size=256]
Memory at fe1f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fe1c0000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Capabilities: [50] Power Management version 2
Kernel driver in use: radeon

01:00.1 Display controller [0380]: ATI Technologies Inc RV280 [Radeon
9200] (Secondary) [1002:5941] (rev 01)

Subsystem: C.P. Technology Co. Ltd Device [148c:2062]
Flags: bus master, 66MHz, medium devsel, latency 64
Memory at c8000000 (32-bit, prefetchable) [size=128M]
Memory at fe1e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2

02:05.0 Ethernet controller [0200]: 3Com Corporation 3c940
10/100/1000Base-T [Marvell] [10b7:1700] (rev 12)
Subsystem: ASUSTeK Computer Inc. A7V600/P4P800/K8V motherboard
[1043:80eb]

Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
Memory at feafc000 (32-bit, non-prefetchable) [size=16K]
I/O ports at d800 [size=256]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Kernel driver in use: skge

02:0c.0 Communication controller [0780]: Intel Corporation 536EP Data
Fax Modem [8086:1040]

Subsystem: Intel Corporation Device [8086:1000]
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at fe400000 (32-bit, non-prefetchable) [size=4M]
Capabilities: [e0] Power Management version 2





--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4DEC0A83.5070801@gmail.com">http://lists.debian.org/4DEC0A83.5070801@gmail.com

Ben Hutchings 06-05-2011 11:13 PM

Bug#629259: ATI RADEON 9200 freezes on Squeeze with firmware-linux-nonfree
 
On Mon, 2011-06-06 at 01:00 +0200, burek pekaric wrote:
> On 06/05/2011 04:49 AM, Ben Hutchings wrote:
> > On Sun, 2011-06-05 at 02:46 +0200, burek pekaric wrote:
> >> Package: firmware-linux-nonfree
> >> Severity: critical
> >> Justification: breaks the whole system
> >>
> >> I'm trying for several days to get my display up and running on fresh install
> >> of Debian Squeeze. I was looking to find the original drivers from the OEM here
> >> http://support.amd.com/us/gpudownload/Pages/linux64-radeon-prer200.aspx but
> >> there are just .rpm packages so I've checked here
> >> http://wiki.debian.org/AtiHowTo in order to finally get my screen to display
> >> more than a couple of colors, but..
> >>
> >> After installing the package firmware-linux-nonfree and reboot, I couldn't even
> >> get to the login screen, because display would stuck just before the background
> >> image of the login screen was fully displayed (animated/faded out). The display
> >> would just freeze and that's it. The mouse would respond for the next couple of
> >> seconds and it would also die. From that moment on only physical reset button
> >> could be of any help :(
> >>
> >> Trying to figure out what the problem is (and how to stop loading of gnome to
> >> have the simple shell login, so I can remove the package), I've found the key
> >> combination Ctrl+Alt+F1 and Ctrl+Alt+Backspace.
> > You should boot to single-user mode. In the GRUB menu, this is labelled
> > as 'recovery mode'. If you use LILO, add an entry with 'append=single'.
> >
> >> On next reboot I tried
> >> constantly pressing these combinations and finally somehow I've got the console
> >> login without GUI, which has let me to login just to show me the message like
> >> this one (several seconds after the login): "... [drm:radeon_fence_wait]
> >> *ERROR* fence(...) 510ms timeout going to reset GPU" and after that, again it
> >> just froze.
> > Please provide the complete messages.
> >
> >> I don't really know what is wrong here, maybe even I've made some wrong steps,
> >> but this really influenced me to stop thinking about switching to Linux,
> >> although I'd really like to give it a try and not give up this easy, but when
> >> the most basic stuff can't work out-of-the-box (like the display driver) it
> >> really makes me feel uncomfortable to proceed any further :/ No offence..
> >>
> >> Is there any command I can type or anything I can do to give you a more
> >> detailed report, so that this issue can be resolved?
> > 'lspci -vnn' would be helpful, in additional to the kernel log messages.
> >
> > Ben.
> >
>
> Hi,
>
> 1. Thanks for the tip for single user mode.
> 2. How to provide complete messages? What command should I type or what
> log file should I attach?
[...]

1. Boot to single-user mode. If you can, add the kernel parameter
'debug' as well as 'single'.
2. Load the radeon driver with the command 'modprobe radeon'.
3. If you are still able to run commands, then run 'dmesg' (directing
output to a file) to get the full kernel log messages. Otherwise, send
a photo of the screen, which should include most of the kernel log
messages.

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

burek pekaric 06-06-2011 01:28 PM

Bug#629259: ATI RADEON 9200 freezes on Squeeze with firmware-linux-nonfree
 
On 06/06/2011 01:13 AM, Ben Hutchings wrote:

On Mon, 2011-06-06 at 01:00 +0200, burek pekaric wrote:


On 06/05/2011 04:49 AM, Ben Hutchings wrote:


On Sun, 2011-06-05 at 02:46 +0200, burek pekaric wrote:


Package: firmware-linux-nonfree
Severity: critical
Justification: breaks the whole system

I'm trying for several days to get my display up and running on fresh install
of Debian Squeeze. I was looking to find the original drivers from the OEM here
http://support.amd.com/us/gpudownload/Pages/linux64-radeon-prer200.aspx but
there are just .rpm packages so I've checked here
http://wiki.debian.org/AtiHowTo in order to finally get my screen to display
more than a couple of colors, but..

After installing the package firmware-linux-nonfree and reboot, I couldn't even
get to the login screen, because display would stuck just before the background
image of the login screen was fully displayed (animated/faded out). The display
would just freeze and that's it. The mouse would respond for the next couple of
seconds and it would also die. From that moment on only physical reset button
could be of any help :(

Trying to figure out what the problem is (and how to stop loading of gnome to
have the simple shell login, so I can remove the package), I've found the key
combination Ctrl+Alt+F1 and Ctrl+Alt+Backspace.


You should boot to single-user mode. In the GRUB menu, this is labelled
as 'recovery mode'. If you use LILO, add an entry with 'append=single'.



On next reboot I tried
constantly pressing these combinations and finally somehow I've got the console
login without GUI, which has let me to login just to show me the message like
this one (several seconds after the login): "... [drm:radeon_fence_wait]
*ERROR* fence(...) 510ms timeout going to reset GPU" and after that, again it
just froze.


Please provide the complete messages.



I don't really know what is wrong here, maybe even I've made some wrong steps,
but this really influenced me to stop thinking about switching to Linux,
although I'd really like to give it a try and not give up this easy, but when
the most basic stuff can't work out-of-the-box (like the display driver) it
really makes me feel uncomfortable to proceed any further :/ No offence..

Is there any command I can type or anything I can do to give you a more
detailed report, so that this issue can be resolved?


'lspci -vnn' would be helpful, in additional to the kernel log messages.

Ben.




Hi,

1. Thanks for the tip for single user mode.
2. How to provide complete messages? What command should I type or what
log file should I attach?


[...]

1. Boot to single-user mode. If you can, add the kernel parameter
'debug' as well as 'single'.
2. Load the radeon driver with the command 'modprobe radeon'.
3. If you are still able to run commands, then run 'dmesg' (directing
output to a file) to get the full kernel log messages. Otherwise, send
a photo of the screen, which should include most of the kernel log
messages.

Ben.





Hi,



I did like you said and here are the results (attachments)

I've successfully booted into "single debug" and typed 'modprobe
radeon' and then typed 'dmesg > radeon.txt', I was able to type
commands, so I did also 'lsmod > lsmod.txt' and 'lspci >
lspci.txt', but all this was in console and I had no problems
working there.



Then I tried to do 'su user' and 'startx' to see if the gui works,
but I ended up with the same problem. Screen has freezed, mouse too
and this time I got some vertical lines across the wallpaper (which
did not load/fade-in completely, just like before) :(



please see attachments



Module Size Used by
fuse 44052 3
loop 9729 0
snd_intel8x0 19595 0
snd_ac97_codec 79148 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
radeon 511276 1
snd_pcm 47226 2 snd_intel8x0,snd_ac97_codec
ttm 33258 1 radeon
drm_kms_helper 18533 1 radeon
snd_seq 35327 0
drm 111844 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 3497 1 radeon
snd_timer 12258 2 snd_pcm,snd_seq
parport_pc 15799 0
snd_seq_device 3673 1 snd_seq
parport 22554 1 parport_pc
btusb 8097 0
bluetooth 36251 1 btusb
rfkill 10196 1 bluetooth
i2c_i801 6462 0
i2c_core 12751 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
shpchp 21220 0
rng_core 2178 0
snd 34387 6 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_ti mer,snd_seq_device
soundcore 3450 1 snd
snd_page_alloc 4977 2 snd_intel8x0,snd_pcm
pcspkr 1207 0
evdev 5609 0
joydev 6739 0
pci_hotplug 18065 1 shpchp
button 3598 0
processor 26259 0
ext3 93944 1
jbd 31965 1 ext3
mbcache 3762 1 ext3
usbhid 27872 0
hid 50841 1 usbhid
sg 19905 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25937 4
crc_t10dif 1012 1 sd_mod
ata_generic 2067 0
uhci_hcd 15989 0
ata_piix 17704 3
libata 115513 2 ata_generic,ata_piix
skge 30098 0
ehci_hcd 28453 0
scsi_mod 104613 4 sg,sr_mod,sd_mod,libata
usbcore 98541 5 btusb,usbhid,uhci_hcd,ehci_hcd
floppy 40923 0
thermal 9206 0
thermal_sys 9378 2 processor,thermal
nls_base 4541 1 usbcore
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (Secondary) (rev 01)
02:05.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
02:0c.0 Communication controller: Intel Corporation 536EP Data Fax Modem
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-34squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed May 18 07:08:50 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
[ 0.000000] BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3ff30 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 2f769000 - 2ffa337a
[ 0.000000] ACPI: RSDP 000f9e60 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3ff30000 00030 (v01 A M I OEMRSDT 07000321 MSFT 00000097)
[ 0.000000] ACPI: FACP 3ff30200 00081 (v02 A M I OEMFACP 07000321 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3ff303f0 0382D (v01 P4P8X P4P8X079 00000079 INTL 02002026)
[ 0.000000] ACPI: FACS 3ff40000 00040
[ 0.000000] ACPI: APIC 3ff30390 0005C (v01 A M I OEMAPIC 07000321 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3ff40040 0003F (v01 A M I OEMBIOS 07000321 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 139MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c8bb4] TEXT DATA BSS ==> [0001000000 - 00014c8bb4]
[ 0.000000] #4 [002f769000 - 002ffa337a] RAMDISK ==> [002f769000 - 002ffa337a]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00014c9000 - 00014cf176] BRK ==> [00014c9000 - 00014cf176]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003ff30
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ff30
[ 0.000000] On node 0 totalpages: 261823
[ 0.000000] free_area_init_node: node 0, pgdat c13b08a0, node_mem_map c14d1200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 279 pages used for memmap
[ 0.000000] HighMem zone: 35355 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u2097152
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259776
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=92fd5efe-3704-475c-94f3-98509eb4158d ro single debug
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003ff30)
[ 0.000000] Memory: 1024208k/1047744k available (2503k kernel code, 22504k reserved, 1313k data, 380k init, 142536k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bb000 - 0xc141a000 ( 380 kB)
[ 0.000000] .data : 0xc1271e61 - 0xc13ba4c0 (1313 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1271e61 (2503 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2399.270 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4798.54 BogoMIPS (lpj=9597080)
[ 0.004139] Security Framework initialized
[ 0.004196] SELinux: Disabled at boot.
[ 0.004259] Mount-cache hash table entries: 512
[ 0.004525] Initializing cgroup subsys ns
[ 0.004588] Initializing cgroup subsys cpuacct
[ 0.004646] Initializing cgroup subsys devices
[ 0.004701] Initializing cgroup subsys freezer
[ 0.004756] Initializing cgroup subsys net_cls
[ 0.004850] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004943] CPU: L2 cache: 128K
[ 0.004995] CPU: Hyper-Threading is disabled
[ 0.005051] mce: CPU supports 4 MCE banks
[ 0.005115] CPU0: Thermal monitoring enabled (TM1)
[ 0.005181] Performance Events: no PMU driver, software events only.
[ 0.005281] Checking 'hlt' instruction... OK.
[ 0.020523] SMP alternatives: switching to UP code
[ 0.027585] ACPI: Core revision 20090903
[ 0.034091] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.034563] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074324] CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
[ 0.076001] Brought up 1 CPUs
[ 0.076001] Total of 1 processors activated (4798.54 BogoMIPS).
[ 0.076001] CPU0 attaching NULL sched-domain.
[ 0.076001] devtmpfs: initialized
[ 0.076001] regulator: core version 0.5
[ 0.076001] NET: Registered protocol family 16
[ 0.076001] ACPI: bus type pci registered
[ 0.076001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 0.076001] PCI: Using configuration type 1 for base access
[ 0.076001] bio: create slab <bio-0> at 0
[ 0.076001] ACPI: EC: Look up EC in DSDT
[ 0.079924] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.086248] ACPI: Interpreter enabled
[ 0.086310] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.086575] ACPI: Using IOAPIC for interrupt routing
[ 0.099454] ACPI Warning: Incorrect checksum in table [OEMB] - 10, should be 01 (20090903/tbutils-314)
[ 0.099718] ACPI: No dock devices found.
[ 0.100031] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.100163] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.100232] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.100414] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[ 0.100586] pci 0000:00:1d.0: reg 20 io port: [0xef00-0xef1f]
[ 0.100704] pci 0000:00:1d.1: reg 20 io port: [0xef20-0xef3f]
[ 0.100820] pci 0000:00:1d.2: reg 20 io port: [0xef40-0xef5f]
[ 0.100935] pci 0000:00:1d.3: reg 20 io port: [0xef80-0xef9f]
[ 0.101059] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff]
[ 0.101179] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.101239] pci 0000:00:1d.7: PME# disabled
[ 0.101392] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.101481] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.101542] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.101602] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.101662] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.101723] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.101784] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.101898] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.102005] pci 0000:00:1f.5: reg 10 io port: [0xe800-0xe8ff]
[ 0.102067] pci 0000:00:1f.5: reg 14 io port: [0xee80-0xeebf]
[ 0.102129] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfebff800-0xfebff9ff]
[ 0.102192] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfebff400-0xfebff4ff]
[ 0.102281] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.102339] pci 0000:00:1f.5: PME# disabled
[ 0.102440] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.102503] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff]
[ 0.102563] pci 0000:01:00.0: reg 18 32bit mmio: [0xfe1f0000-0xfe1fffff]
[ 0.102637] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe1c0000-0xfe1dffff]
[ 0.102717] pci 0000:01:00.0: supports D1 D2
[ 0.102811] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xc8000000-0xcfffffff]
[ 0.102874] pci 0000:01:00.1: reg 14 32bit mmio: [0xfe1e0000-0xfe1effff]
[ 0.102967] pci 0000:01:00.1: supports D1 D2
[ 0.103076] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.103134] pci 0000:00:01.0: bridge 32bit mmio: [0xfe100000-0xfe1fffff]
[ 0.103194] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbff00000-0xdfefffff]
[ 0.103307] pci 0000:02:05.0: reg 10 32bit mmio: [0xfeafc000-0xfeafffff]
[ 0.103372] pci 0000:02:05.0: reg 14 io port: [0xd800-0xd8ff]
[ 0.103475] pci 0000:02:05.0: supports D1 D2
[ 0.103528] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.103587] pci 0000:02:05.0: PME# disabled
[ 0.103693] pci 0000:02:0c.0: reg 10 32bit mmio: [0xfe400000-0xfe7fffff]
[ 0.103800] pci 0000:02:0c.0: supports D2
[ 0.103852] pci 0000:02:0c.0: PME# supported from D2 D3hot D3cold
[ 0.103910] pci 0000:02:0c.0: PME# disabled
[ 0.104029] pci 0000:00:1e.0: transparent bridge
[ 0.104088] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.104146] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe200000-0xfeafffff]
[ 0.104220] pci_bus 0000:00: on NUMA node 0
[ 0.104286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.104512] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.115115] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.115774] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.116449] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.117103] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.117760] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.118419] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.119172] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.119829] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.120536] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.120612] vgaarb: loaded
[ 0.120812] PCI: Using ACPI for IRQ routing
[ 0.121214] hpet clockevent registered
[ 0.121274] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.121335] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.121532] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.124049] Switching to clocksource tsc
[ 0.125993] pnp: PnP ACPI init
[ 0.126077] ACPI: bus type pnp registered
[ 0.133203] pnp: PnP ACPI: found 14 devices
[ 0.133262] ACPI: ACPI bus type pnp unregistered
[ 0.133319] PnPBIOS: Disabled by ACPI PNP
[ 0.133396] system 00:0a: ioport range 0x680-0x6ff has been reserved
[ 0.133454] system 00:0a: ioport range 0x290-0x297 has been reserved
[ 0.133520] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.133578] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 0.133636] system 00:0b: ioport range 0x480-0x4bf has been reserved
[ 0.133696] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.133756] system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.133830] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.133899] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.133963] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.134021] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
[ 0.134080] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.134139] system 00:0d: iomem range 0x100000-0x3ffeffff could not be reserved
[ 0.134207] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.169218] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.169281] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.169341] pci 0000:00:01.0: MEM window: 0xfe100000-0xfe1fffff
[ 0.169400] pci 0000:00:01.0: PREFETCH window: 0xbff00000-0xdfefffff
[ 0.169463] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.169520] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.169579] pci 0000:00:1e.0: MEM window: 0xfe200000-0xfeafffff
[ 0.169636] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.169712] pci 0000:00:1e.0: setting latency timer to 64
[ 0.169771] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.169827] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.169884] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.169940] pci_bus 0000:01: resource 1 mem: [0xfe100000-0xfe1fffff]
[ 0.169997] pci_bus 0000:01: resource 2 pref mem [0xbff00000-0xdfefffff]
[ 0.170054] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.170110] pci_bus 0000:02: resource 1 mem: [0xfe200000-0xfeafffff]
[ 0.170167] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.170222] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.170325] NET: Registered protocol family 2
[ 0.170519] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.171091] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.172180] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.172748] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.172814] TCP reno registered
[ 0.173017] NET: Registered protocol family 1
[ 1.772020] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.772208] pci 0000:01:00.0: Boot video device
[ 1.772341] Unpacking initramfs...
[ 2.171084] Freeing initrd memory: 8424k freed
[ 2.180468] audit: initializing netlink socket (disabled)
[ 2.180545] type=2000 audit(1307366083.180:1): initialized
[ 2.184120] highmem bounce pool size: 64 pages
[ 2.184186] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.186236] VFS: Disk quotas dquot_6.5.2
[ 2.186405] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.186612] msgmni has been set to 1739
[ 2.187089] alg: No test for stdrng (krng)
[ 2.187266] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.187338] io scheduler noop registered
[ 2.187389] io scheduler anticipatory registered
[ 2.187443] io scheduler deadline registered
[ 2.187559] io scheduler cfq registered (default)
[ 2.187908] isapnp: Scanning for PnP cards...
[ 2.541901] isapnp: No Plug & Play device found
[ 2.545206] Linux agpgart interface v0.103
[ 2.545377] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 2.561603] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 2.561768] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.561949] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.562160] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.562700] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.563002] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.563361] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.563422] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.564532] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.564801] mice: PS/2 mouse device common for all mice
[ 2.564963] rtc_cmos 00:02: RTC can wake from S4
[ 2.565127] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.565218] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.565301] cpuidle: using governor ladder
[ 2.565356] cpuidle: using governor menu
[ 2.565413] No iBFT detected.
[ 2.566024] TCP cubic registered
[ 2.566275] NET: Registered protocol family 10
[ 2.567601] Mobile IPv6
[ 2.567659] NET: Registered protocol family 17
[ 2.567746] Using IPI No-Shortcut mode
[ 2.568092] PM: Resume from disk failed.
[ 2.568180] registered taskstats version 1
[ 2.568564] rtc_cmos 00:02: setting system clock to 2011-06-06 13:14:44 UTC (1307366084)
[ 2.568669] Initalizing network drop monitor service
[ 2.568772] Freeing unused kernel memory: 380k freed
[ 2.569301] Write protecting the kernel text: 2504k
[ 2.569382] Write protecting the kernel read-only data: 908k
[ 2.585987] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.612317] udev[46]: starting version 164
[ 2.927366] Floppy drive(s): fd0 is 1.44M
[ 2.958283] FDC 0 is a post-1991 82077
[ 3.060441] usbcore: registered new interface driver usbfs
[ 3.061025] usbcore: registered new interface driver hub
[ 3.062395] usbcore: registered new device driver usb
[ 3.071196] SCSI subsystem initialized
[ 3.075501] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.075623] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.075711] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.075769] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.075866] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.075989] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.079978] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 3.112431] skge 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.112547] skge 1.13 addr 0xfeafc000 irq 22 chip Yukon rev 1
[ 3.113888] skge eth0: addr 00:0c:6e:fa:e1:4e
[ 3.114510] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 3.120729] libata version 3.00 loaded.
[ 3.128056] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.128172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.128233] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.128300] usb usb1: Product: EHCI Host Controller
[ 3.128354] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 3.128409] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.128751] usb usb1: configuration #1 chosen from 1 choice
[ 3.129019] hub 1-0:1.0: USB hub found
[ 3.129095] hub 1-0:1.0: 8 ports detected
[ 3.133661] ata_piix 0000:00:1f.1: version 2.13
[ 3.133735] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 3.133806] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.133935] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.134138] scsi0 : ata_piix
[ 3.134911] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.135045] scsi1 : ata_piix
[ 3.137715] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 3.137780] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 3.137960] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.138034] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.138092] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.138170] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.138282] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
[ 3.138397] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.138457] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.138524] usb usb2: Product: UHCI Host Controller
[ 3.138577] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 3.138633] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.138994] usb usb2: configuration #1 chosen from 1 choice
[ 3.139258] hub 2-0:1.0: USB hub found
[ 3.139335] hub 2-0:1.0: 2 ports detected
[ 3.139507] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.139579] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.139637] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.139709] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.139819] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20
[ 3.139930] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.139990] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.140096] usb usb3: Product: UHCI Host Controller
[ 3.140152] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 3.140208] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.141276] usb usb3: configuration #1 chosen from 1 choice
[ 3.141554] hub 3-0:1.0: USB hub found
[ 3.141633] hub 3-0:1.0: 2 ports detected
[ 3.141791] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.141862] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.141920] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.141993] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.142105] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
[ 3.142217] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.142276] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.142343] usb usb4: Product: UHCI Host Controller
[ 3.142396] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 3.142451] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.142953] usb usb4: configuration #1 chosen from 1 choice
[ 3.143232] hub 4-0:1.0: USB hub found
[ 3.143306] hub 4-0:1.0: 2 ports detected
[ 3.143464] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.143536] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.143594] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.143666] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.143766] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
[ 3.143882] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.143941] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.144049] usb usb5: Product: UHCI Host Controller
[ 3.144104] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 3.144160] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.144519] usb usb5: configuration #1 chosen from 1 choice
[ 3.144785] hub 5-0:1.0: USB hub found
[ 3.144862] hub 5-0:1.0: 2 ports detected
[ 3.360529] ata1.00: ATA-6: ST380011A, 3.06, max UDMA/100
[ 3.360592] ata1.00: 156301488 sectors, multi 16: LBA48
[ 3.376448] ata1.00: configured for UDMA/100
[ 3.376695] scsi 0:0:0:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
[ 3.472704] ata2.00: ATAPI: SONY DVD-ROM DDU1612, DYS1, max UDMA/33
[ 3.472813] ata2.01: ATAPI: SONY CD-RW CRX230E, QYS1, max UDMA/33
[ 3.473377] ata2.00: configured for UDMA/33
[ 3.488226] ata2.01: configured for UDMA/33
[ 3.489719] scsi 1:0:0:0: CD-ROM SONY DVD-ROM DDU1612 DYS1 PQ: 0 ANSI: 5
[ 3.491284] scsi 1:0:1:0: CD-ROM SONY CD-RW CRX230E QYS1 PQ: 0 ANSI: 5
[ 3.533063] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 3.533305] sd 0:0:0:0: [sda] Write Protect is off
[ 3.533364] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.533490] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.533979] sda:sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 3.537724] Uniform CD-ROM driver Revision: 3.20
[ 3.538701] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.541943] sda1 sda2 sda3
[ 3.542286] sr1: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
[ 3.543282] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 3.563471] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.604720] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.605990] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.607246] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 3.736043] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 3.904145] usb 2-2: New USB device found, idVendor=1bcf, idProduct=0007
[ 3.904210] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.904268] usb 2-2: Product: USB Optical Mouse
[ 3.904655] usb 2-2: configuration #1 chosen from 1 choice
[ 3.929556] usbcore: registered new interface driver hiddev
[ 3.950016] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 3.951299] generic-usb 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 3.951442] usbcore: registered new interface driver usbhid
[ 3.951965] usbhid: v2.6:USB HID core driver
[ 4.036772] PM: Starting manual resume from disk
[ 4.036836] PM: Resume from partition 8:1
[ 4.036888] PM: Checking hibernation image.
[ 4.037260] PM: Error -22 checking image file
[ 4.037317] PM: Resume from disk failed.
[ 4.084456] kjournald starting. Commit interval 5 seconds
[ 4.084537] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.144090] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 4.324536] usb 3-1: New USB device found, idVendor=1131, idProduct=1004
[ 4.324602] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.324660] usb 3-1: Product: ISSCEDRBTA
[ 4.324713] usb 3-1: Manufacturer: ISSC
[ 4.324915] usb 3-1: configuration #1 chosen from 1 choice
[ 5.665386] udev[276]: starting version 164
[ 6.216104] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.216186] ACPI: Power Button [PWRB]
[ 6.216364] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.216439] ACPI: Power Button [PWRF]
[ 6.216963] processor LNXCPU:00: registered as cooling_device0
[ 6.265122] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.287047] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.614568] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.806395] intel_rng: FWH not detected
[ 6.813213] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.935123] Bluetooth: Core ver 2.15
[ 6.935294] NET: Registered protocol family 31
[ 6.935350] Bluetooth: HCI device and connection manager initialized
[ 6.935409] Bluetooth: HCI socket layer initialized
[ 6.965210] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.966059] usbcore: registered new interface driver btusb
[ 6.983654] parport_pc 00:09: reported by Plug and Play ACPI
[ 6.983828] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 7.257783] [drm] Initialized drm 1.1.0 20060810
[ 7.751936] [drm] radeon kernel modesetting enabled.
[ 7.752110] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.755434] [drm] radeon: Initializing kernel modesetting.
[ 7.756443] [drm] register mmio base: 0xFE1F0000
[ 7.756501] [drm] register mmio size: 65536
[ 7.759672] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 7.762292] [drm] Generation 2 PCI interface, using max accessible memory
[ 7.762370] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 7.762447] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 7.762544] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 7.762621] [drm] radeon: VRAM 128M
[ 7.762673] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 7.762728] [drm] radeon: GTT 256M
[ 7.762780] [drm] radeon: GTT from 0xE0000000 to 0xEFFFFFFF
[ 7.762865] [drm] radeon: irq initialized.
[ 7.763021] [drm] Detected VRAM RAM=128M, BAR=128M
[ 7.763081] [drm] RAM width 128bits DDR
[ 7.763525] [TTM] Zone kernel: Available graphics memory: 445530 kiB.
[ 7.763587] [TTM] Zone highmem: Available graphics memory: 516798 kiB.
[ 7.763669] [drm] radeon: 128M of VRAM memory ready
[ 7.763725] [drm] radeon: 256M of GTT memory ready.
[ 7.764062] [drm] radeon: cp idle (0x02000603)
[ 7.764182] [drm] Loading R200 Microcode
[ 7.764969] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[ 7.834172] [drm] radeon: ring at 0x00000000E0000000
[ 7.834252] [drm] ring test succeeded in 1 usecs
[ 7.842345] [drm] radeon: ib pool ready.
[ 7.842505] [drm] ib test succeeded in 0 usecs
[ 7.843637] [drm] Default TV standard: PAL
[ 7.843701] [drm] 27.000000000 MHz TV ref clk
[ 7.850987] [drm] DFP table revision: 3
[ 7.852103] [drm] Default TV standard: PAL
[ 7.852163] [drm] 27.000000000 MHz TV ref clk
[ 7.852413] [drm] Radeon Display Connectors
[ 7.852470] [drm] Connector 0:
[ 7.852520] [drm] VGA
[ 7.852571] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 7.852626] [drm] Encoders:
[ 7.852677] [drm] CRT1: INTERNAL_DAC1
[ 7.852728] [drm] Connector 1:
[ 7.852778] [drm] DVI-I
[ 7.852827] [drm] HPD1
[ 7.852878] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 7.852933] [drm] Encoders:
[ 7.852983] [drm] CRT2: INTERNAL_DAC2
[ 7.853034] [drm] DFP1: INTERNAL_TMDS1
[ 7.853086] [drm] Connector 2:
[ 7.853136] [drm] S-video
[ 7.853185] [drm] Encoders:
[ 7.853235] [drm] TV1: INTERNAL_DAC2
[ 7.899589] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.899706] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 8.034393] [drm] fb mappable at 0xD0040000
[ 8.034453] [drm] vram apper at 0xD0000000
[ 8.034505] [drm] size 7056000
[ 8.034556] [drm] fb depth is 24
[ 8.034606] [drm] pitch is 6720
[ 8.120632] Console: switching to colour frame buffer device 210x65
[ 8.153278] fb0: radeondrmfb frame buffer device
[ 8.153414] registered panic notifier
[ 8.154195] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 8.268848] intel8x0: white list rate for 1043:80f3 is 48000
[ 9.142650] Adding 1952760k swap on /dev/sda1. Priority:-1 extents:1 across:1952760k
[ 9.553761] EXT3 FS on sda3, internal journal
[ 9.699306] loop: module loaded
[ 10.568055] fuse init (API version 7.13)

burek pekaric 06-11-2011 07:56 AM

Bug#629259: ATI RADEON 9200 freezes on Squeeze with firmware-linux-nonfree
 
Hi,

Are there any news about this issue?



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4DF31FA9.3000008@gmail.com">http://lists.debian.org/4DF31FA9.3000008@gmail.com

Jonathan Nieder 09-03-2011 07:33 PM

Bug#629259: ATI RADEON 9200 freezes on Squeeze with firmware-linux-nonfree
 
Hi,

burek pekaric wrote:

> I did like you said and here are the results (attachments)
> I've successfully booted into "single debug" and typed 'modprobe radeon' and
> then typed 'dmesg > radeon.txt', I was able to type commands, so I did also
> 'lsmod > lsmod.txt' and 'lspci > lspci.txt', but all this was in console and
> I had no problems working there.
>
> Then I tried to do 'su user' and 'startx' to see if the gui works, but I
> ended up with the same problem. Screen has freezed, mouse too and this time
> I got some vertical lines across the wallpaper (which did not load/fade-in
> completely, just like before) :(

Sorry for the slow response. Please attach output from

/usr/share/bug/xserver-xorg/script 3>&1

after rebooting in single-user mode after such a freeze.

Thanks,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110903193336.GA30976@elie">http://lists.debian.org/20110903193336.GA30976@elie

Jonathan Nieder 11-14-2011 09:10 AM

Bug#629259: ATI RADEON 9200 freezes on Squeeze with firmware-linux-nonfree
 
tags 629259 + moreinfo
quit

Jonathan Nieder wrote:
> burek pekaric wrote:

>> I've successfully booted into "single debug" and typed 'modprobe radeon' and
>> then typed 'dmesg > radeon.txt', I was able to type commands, so I did also
>> 'lsmod > lsmod.txt' and 'lspci > lspci.txt', but all this was in console and
>> I had no problems working there.
>>
>> Then I tried to do 'su user' and 'startx' to see if the gui works, but I
>> ended up with the same problem. Screen has freezed
[...]
> Please attach output from
>
> /usr/share/bug/xserver-xorg/script 3>&1
>
> after rebooting in single-user mode after such a freeze.

Were you able to try that? Any other news?

If life is just busy, that's fine. Take your time. But please do
let us know, so we can distinguish that from e.g. cases in which you
no longer have access to the hardware and there is no chance of this
eventually being understood and resulting in a bugfix.

Thanks,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111114101045.GA30202@elie.hsd1.il.comcast.net">h ttp://lists.debian.org/20111114101045.GA30202@elie.hsd1.il.comcast.net

"burek" 11-14-2011 09:18 AM

Bug#629259: ATI RADEON 9200 freezes on Squeeze with firmware-linux-nonfree
 
----- Original Message -----


Please attach output from

/usr/share/bug/xserver-xorg/script 3>&1

after rebooting in single-user mode after such a freeze.


Were you able to try that? Any other news?

If life is just busy, that's fine. Take your time. But please do
let us know, so we can distinguish that from e.g. cases in which you
no longer have access to the hardware and there is no chance of this
eventually being understood and resulting in a bugfix.

Thanks,
Jonathan


Hi,

I apologize for not answering, must haven't seen the previous reply..
Anyway, I had to switch back to windows :( I just didn't have enough time to
play around with it :( However, there is one important thing which I think
might be the reason of all this and that's an old graphic card (it was used
for too long) and I think it started to fall apart (figuratively). I had
luck to find exact the same card and replace it and since then I didn't
encounter any problems, not even in windows. So my wild guess is that the
faulty card was the reason of all that buggy behavior.


I'm thinking of switching back to debian again, to give it another shot,
with this new/working card, and if I encounter the same problem, I'll reopen
this bug report, ok?


Thanks for your answers and help so far.





--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 69D32AEE06A74C6A99E5C68147C25C68@djuro">http://lists.debian.org/69D32AEE06A74C6A99E5C68147C25C68@djuro


All times are GMT. The time now is 07:35 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.