FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-17-2011, 04:16 PM
Mark Glassberg
 
Default Bug#627098: linux-image-2.6.32-5-686: rndis_host fails to recognize usb device

Package: linux-2.6
Version: 2.6.32-31
Severity: normal

I'm running squeeze and I have a usb communication device that my 2.6.32-5-686
kernel doesn't recognize. The device, called a PC Port, is manufactured by
2Wire, which is now part of Pace Plc. It functions as an interface to a phone
line based network using HomePNA technology. I use a 2Wire modem/router which
is also a usb device running HomePNA, and it is recognized by rndis_host as an
eth device, but my PC Port is not.

-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Mar 8 21:36:00 UTC 2011

** Command line:
root=/dev/sdb2 ro acpi=off pci=noacpi BOOT_IMAGE=vmlinuz

** Not tainted

** Kernel log:
[ 6.530154] scsi target2:0:6: Beginning Domain Validation
[ 6.542446] scsi target2:0:6: Ending Domain Validation
[ 8.884195] scsi 0:0:0:0: Direct-Access ATA ST320423A 3.02 PQ: 0 ANSI: 5
[ 8.885045] scsi 0:0:1:0: Direct-Access ATA ST380021A 3.19 PQ: 0 ANSI: 5
[ 8.889551] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5
[ 8.948785] usbcore: registered new interface driver hiddev
[ 8.969845] sd 0:0:0:0: [sdb] 40011300 512-byte logical blocks: (20.4 GB/19.0 GiB)
[ 8.970143] sd 0:0:0:0: [sdb] Write Protect is off
[ 8.970205] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 8.970297] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.970843] sdb:
[ 8.972468] sd 2:0:6:0: [sda] 196608 512-byte logical blocks: (100 MB/96.0 MiB)
[ 8.974295] sd 2:0:6:0: [sda] Write Protect is off
[ 8.974360] sd 2:0:6:0: [sda] Mode Sense: 31 00 00 08
[ 8.975419] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 8.975482] Uniform CD-ROM driver Revision: 3.20
[ 8.975626] sdb1 sdb2 sdb3 sdb4 <
[ 8.977076] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.977673] sd 2:0:6:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.984427] sda: sdb5
[ 8.994712] sd 0:0:1:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 9.017525] sdb6 >
[ 9.018395] sd 0:0:1:0: [sdc] Write Protect is off
[ 9.018459] sd 0:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 9.018552] sd 0:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.021051] sdc: sda4
[ 9.030249] sdc1 sdc2 sdc3 sdc4 <
[ 9.030602] sd 2:0:6:0: [sda] Attached SCSI removable disk
[ 9.050326] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 9.050408] sdc5 sdc6 >
[ 9.071474] sd 0:0:1:0: [sdc] Attached SCSI disk
[ 9.129991] sd 2:0:6:0: Attached scsi generic sg0 type 0
[ 9.131411] sd 0:0:0:0: Attached scsi generic sg1 type 0
[ 9.132892] sd 0:0:1:0: Attached scsi generic sg2 type 0
[ 9.134253] sr 1:0:0:0: Attached scsi generic sg3 type 5
[ 9.342853] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 350 FW:823.B1.D USB FW:B1] on usb-0000:00:1d.0-2/input0
[ 9.342999] usbcore: registered new interface driver usbhid
[ 9.343061] usbhid: v2.6:USB HID core driver
[ 14.325035] udev[261]: starting version 164
[ 15.369095] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.562122] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.593819] udev[284]: renamed network interface eth1 to eth1-eth0
[ 15.603951] udev[301]: renamed network interface eth0 to eth1
[ 15.622165] intel_rng: Firmware space is locked read-only. If you can't or
[ 15.622169] intel_rng: don't want to disable this in firmware setup, and if
[ 15.622172] intel_rng: you are certain that your system has a functional
[ 15.622174] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 15.645398] udev[284]: renamed network interface eth1-eth0 to eth0
[ 16.034809] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 16.431069] i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 16.433890] parport_pc 00:0c: reported by Plug and Play BIOS
[ 16.434009] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 16.503250] usbcore: registered new interface driver cdc_ether
[ 16.576316] eth2: register 'rndis_host' at usb-0000:00:1d.1-1, RNDIS device (poll status before control), 00:d0:9e:da:e2:02
[ 16.577198] usbcore: registered new interface driver rndis_host
[ 17.051109] cfg80211: Using static regulatory domain info
[ 17.051171] cfg80211: Regulatory domain: US
[ 17.051224] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.051292] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 17.051350] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 17.051407] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 17.051465] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 17.051522] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 17.051579] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 17.052449] cfg80211: Calling CRDA for country: US
[ 17.105898] usbcore: registered new interface driver rndis_wlan
[ 17.325739] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input2
[ 17.329858] udev[272]: renamed network interface eth2 to eth3
[ 17.384855] Intel ICH 0000:00:1f.5: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 17.384996] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 17.824049] intel8x0_measure_ac97_clock: measured 52361 usecs (2523 samples)
[ 17.824113] intel8x0: clocking to 48000
[ 22.811441] loop: module loaded
[ 25.070476] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 25.323356] EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
[ 25.385943] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 25.400644] ISO 9660 Extensions: RRIP_1991A
[ 26.476462] Bridge firewalling registered
[ 26.486272] device eth0 entered promiscuous mode
[ 26.491283] eth0: link down
[ 26.496339] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.505821] device eth3 entered promiscuous mode
[ 26.519896] br0: port 2(eth3) entering learning state
[ 36.748011] br0: no IPv6 routers present
[ 36.960011] eth3: no IPv6 routers present
[ 41.516013] br0: port 2(eth3) entering forwarding state
[ 42.784369] fuse init (API version 7.13)
[ 43.949444] lp0: using parport0 (interrupt-driven).
[ 43.968966] ppdev: user-space parallel port driver
[10217.760036] usb 2-1: new full speed USB device using uhci_hcd and address 3
[10217.962713] usb 2-1: New USB device found, idVendor=03f0, idProduct=3111
[10217.962768] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10217.962817] usb 2-1: Product: officejet 4100 series
[10217.962861] usb 2-1: Manufacturer: Hewlett-Packard
[10217.962905] usb 2-1: SerialNumber: MY41CF11894Z
[10217.964866] usb 2-1: configuration #1 chosen from 1 choice
[10218.016358] usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3111
[10218.016481] usbcore: registered new interface driver usblp
[10254.834386] usblp1: removed
[10793.872077] usb 2-1: USB disconnect, address 3

** Model information
not available

** Loaded modules:
Module Size Used by
usblp 7899 0
ppdev 4058 0
lp 5570 0
fuse 44256 1
bridge 33019 0
stp 996 1 bridge
nls_utf8 908 1
isofs 24608 1
nls_cp437 4489 1
msdos 5118 1
fat 34912 1 msdos
loop 9765 0
snd_intel8x0 19595 0
snd_ac97_codec 79148 1 snd_intel8x0
rndis_wlan 15984 0
cfg80211 87657 1 rndis_wlan
ac97_bus 710 1 snd_ac97_codec
rfkill 10264 1 cfg80211
snd_pcm 47226 2 snd_intel8x0,snd_ac97_codec
snd_seq 35463 0
rndis_host 4359 1 rndis_wlan
snd_timer 12258 2 snd_pcm,snd_seq
cdc_ether 2633 1 rndis_host
snd_seq_device 3673 1 snd_seq
usbnet 9527 3 rndis_wlan,rndis_host,cdc_ether
i2c_i801 6462 0
parport_pc 15799 1
snd 34375 6 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_ti mer,snd_seq_device
thermal_sys 9378 0
soundcore 3450 1 snd
psmouse 44809 0
pcspkr 1207 0
evdev 5609 0
parport 22554 3 ppdev,lp,parport_pc
i2c_core 12787 1 i2c_i801
snd_page_alloc 5045 2 snd_intel8x0,snd_pcm
shpchp 21220 0
serio_raw 2916 0
output 1204 0
rng_core 2178 0
pci_hotplug 18065 1 shpchp
ext2 46245 2
mbcache 3762 1 ext2
sg 15968 0
sr_mod 10770 1
sd_mod 26005 4
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
usbhid 28008 1
ata_generic 2067 0
hid 50909 1 usbhid
uhci_hcd 16057 0
ata_piix 17736 4
8139too 14949 0
sym53c8xx 58040 0
e100 22317 0
libata 115753 2 ata_generic,ata_piix
floppy 40923 0
8139cp 13421 0
ehci_hcd 28681 0
mii 2714 4 usbnet,8139too,e100,8139cp
scsi_transport_spi 14866 1 sym53c8xx
scsi_mod 101429 6 sg,sr_mod,sd_mod,sym53c8xx,libata,scsi_transport_s pi
usbcore 98733 10 usblp,rndis_wlan,rndis_host,cdc_ether,usbnet,usbhi d,uhci_hcd,ehci_hcd
nls_base 4541 5 nls_utf8,isofs,nls_cp437,fat,usbcore

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto br0
iface br0 inet static
address 172.16.2.1
network 172.16.0.0
netmask 255.255.0.0
broadcast 172.16.255.255
gateway 172.16.4.1
bridge_ports eth0 eth3


** Network status:
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 660 10 0 0 0 0 0 0 660 10 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth3: 8581387 26220 44 0 0 44 0 0 2469415 15915 0 0 0 0 0 0
br0: 8579745 26174 0 0 0 0 0 10683 1769155 15915 0 0 0 0 0 0

*** Protocol statistics:
Ip:
15423 total packets received
0 forwarded
0 incoming packets discarded
15410 incoming packets delivered
15422 requests sent out
Icmp:
11 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 11
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
IcmpMsg:
InType3: 11
Tcp:
448 active connections openings
0 passive connection openings
2 failed connection attempts
24 connection resets received
1 connections established
14080 segments received
14071 segments send out
87 segments retransmited
0 bad segments received.
164 resets sent
Udp:
1254 packets received
0 packets to unknown port received.
0 packet receive errors
1264 packets sent
UdpLite:
TcpExt:
3 TCP sockets finished time wait in fast timer
349 delayed acks sent
Quick ack mode was activated 58 times
364 packets directly queued to recvmsg prequeue.
41590 bytes directly received in process context from prequeue
9763 packet headers predicted
146 packets header predicted and directly queued to user
808 acknowledgments not containing data payload received
203 predicted acknowledgments
34 congestion windows recovered without slow start after partial ack
1 timeouts after SACK recovery
1 timeouts in loss state
24 retransmits in slow start
58 other TCP timeouts
74 DSACKs sent for old packets
21 DSACKs received
37 connections reset due to unexpected data
8 connections reset due to early user close
1 connections aborted due to timeout
TCPDSACKIgnoredOld: 1
TCPDSACKIgnoredNoUndo: 2
TCPSackShiftFallback: 10
IpExt:
InBcastPkts: 65
InOctets: 8199947
OutOctets: 1532705
InBcastOctets: 10933

*** Device features:
br0: 0x1829
eth0: 0x829
eth1: 0x0
eth3: 0x0
lo: 0x13865

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] Vendor Specific Information: Len=06 <?>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ec00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]

00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: 40000000-400fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 40100000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: i801_smbus

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:e001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Intel ICH

01:04.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c875 [1000:000f] (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (4250ns min, 16000ns max), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at ff8ffc00 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at ff8fe000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 40000000 [disabled] [size=64K]
Kernel driver in use: sym53c8xx

01:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Device [3030:5032]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c400 [size=256]
Region 1: Memory at ff8ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too

01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 01)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:302f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ff8fd000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at cc00 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1630:0042
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.utf8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-31 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-31 Binary firmware for various driver
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub-legacy [grub] 0.97-64 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.28 Binary firmware for various driver
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
[ 6964.744044] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 6964.969408] usb 3-2: New USB device found, idVendor=1630, idProduct=0011
[ 6964.969474] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6964.969533] usb 3-2: Product: 2Wire PC Port
[ 6964.969586] usb 3-2: Manufacturer: 2Wire Inc
[ 6964.970839] usb 3-2: configuration #1 chosen from 1 choice
Device: ID 1630:0042
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.01
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1630
idProduct 0x0042
bcdDevice 1.00
iManufacturer 1 2Wire Inc
iProduct 2 2Wire USB Remote NDIS Ethernet
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 2WIREHPL
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 40mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 255 Vendor Specific (MSFT RNDIS?)
iInterface 5 ndis5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
CDC Header:
bcdCDC 1.00
CDC Call Management:
bmCapabilities 0x00
bDataInterface 1
CDC ACM:
bmCapabilities 0x00
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 6 ethernet
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0001
Self Powered
 
Old 05-17-2011, 06:11 PM
Ben Hutchings
 
Default Bug#627098: linux-image-2.6.32-5-686: rndis_host fails to recognize usb device

On Tue, May 17, 2011 at 12:16:31PM -0400, Mark Glassberg wrote:
> Package: linux-2.6
> Version: 2.6.32-31
> Severity: normal
>
> I'm running squeeze and I have a usb communication device that my 2.6.32-5-686
> kernel doesn't recognize. The device, called a PC Port, is manufactured by
> 2Wire, which is now part of Pace Plc. It functions as an interface to a phone
> line based network using HomePNA technology. I use a 2Wire modem/router which
> is also a usb device running HomePNA, and it is recognized by rndis_host as an
> eth device, but my PC Port is not.
[...]

Where do you find these things, Mark? ;-)

The log you attached shows this device being discovered, but doesn't
show rndis_host doing anything with it. Does any driver seem to
recognise the device at all?

Ben.

--
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
- Albert Camus



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110517181147.GD29924@decadent.org.uk">http://lists.debian.org/20110517181147.GD29924@decadent.org.uk
 
Old 07-11-2011, 03:48 AM
Ben Hutchings
 
Default Bug#627098: linux-image-2.6.32-5-686: rndis_host fails to recognize usb device

-------- Forwarded Message --------
From: Mark Glassberg <vzeeaxwl@myfairpoint.net>
To: Ben Hutchings <ben@decadent.org.uk>
Subject: Re: Bug#627098: linux-image-2.6.32-5-686: rndis_host fails to recognize usb device
Date: Fri, 8 Jul 2011 14:07:07 -0400

On Thu, Jul 07, 2011 at 03:24:29PM +0000, Ben Hutchings wrote:
> The log you attached shows this device being discovered, but doesn't
> show rndis_host doing anything with it. Does any driver seem to
> recognise the device at all?

Unfortunately, the answer is no to all the modules in kernel/drivers/net/usb/.
Any suggestions?

Mark





--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 1310356098.8783.60.camel@localhost">http://lists.debian.org/1310356098.8783.60.camel@localhost
 
Old 07-13-2011, 02:43 AM
Ben Hutchings
 
Default Bug#627098: linux-image-2.6.32-5-686: rndis_host fails to recognize usb device

On Fri, 2011-07-08 at 14:07 -0400, Mark Glassberg wrote:
> On Thu, Jul 07, 2011 at 03:24:29PM +0000, Ben Hutchings wrote:
> > The log you attached shows this device being discovered, but doesn't
> > show rndis_host doing anything with it. Does any driver seem to
> > recognise the device at all?
>
> Unfortunately, the answer is no to all the modules in kernel/drivers/net/usb/.
> Any suggestions?

Can you try a newer version (2.6.39 from testing/unstable or 3.0-rc6
from experimental)?

Ben.

--
Ben Hutchings
All extremists should be taken out and shot.
 
Old 07-21-2011, 11:46 PM
Ben Hutchings
 
Default Bug#627098: linux-image-2.6.32-5-686: rndis_host fails to recognize usb device

-------- Forwarded Message --------
From: Mark Glassberg <vzeeaxwl@myfairpoint.net>
To: Ben Hutchings <ben@decadent.org.uk>
Subject: Re: Bug#627098: linux-image-2.6.32-5-686: rndis_host fails to recognize usb device
Date: Sat, 16 Jul 2011 11:59:20 -0400

On Wed, Jul 13, 2011 at 12:55:44PM +0000, Ben Hutchings wrote:
> Can you try a newer version (2.6.39 from testing/unstable or 3.0-rc6 from
> experimental)?

I don't know if 2.6.39 can be used on my squeeze system, so I burned the
first cd of wheeze and installed it. The installer had problems with my
usb modem/router, so I finished the install and rebooted without it. I
then connected the usb modem/router, but the kernel and/or rndis_host
failed. I then disconnected the usb modem/router and connected the PC Port.
Again, it failed. The /var/log/messages file is attached.

Please let me know if there are any arguments which should be used with
rndis_host or any of the other modules. Also, was it necessary to install
wheeze? And finally, how do I go about using 3.0-rc6?

Mark

Jul 16 11:31:14 hpn2 kernel: imklog 5.8.2, log source = /proc/kmsg started.
Jul 16 11:31:14 hpn2 rsyslogd: [origin software="rsyslogd" swVersion="5.8.2" x-pid="807" x-info="http://www.rsyslog.com"] start
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Initializing cgroup subsys cpu
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Linux version 2.6.39-2-686-pae (Debian 2.6.39-2) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:33:14 UTC 2011
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] BIOS-provided physical RAM map:
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ef2fc00 (usable)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] BIOS-e820: 000000003ef2fc00 - 000000003ef30000 (ACPI NVS)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] BIOS-e820: 000000003ef30000 - 000000003ef40000 (ACPI data)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] BIOS-e820: 000000003ef40000 - 000000003eff0000 (ACPI NVS)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] BIOS-e820: 000000003eff0000 - 000000003f000000 (reserved)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] DMI 2.3 present.
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] last_pfn = 0x3ef2f max_arch_pfn = 0x1000000
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] found SMP MP-table at [c00ff780] ff780
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] RAMDISK: 3773a000 - 37ff0000
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Allocated new RAMDISK: 36e84000 - 37739883
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Move RAMDISK from 000000003773a000 - 0000000037fef882 to 36e84000 - 37739882
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] 117MB HIGHMEM available.
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] 889MB LOWMEM available.
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] mapped low ram: 0 - 379fe000
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] low ram: 0 - 379fe000
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Zone PFN ranges:
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Normal 0x00001000 -> 0x000379fe
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] HighMem 0x000379fe -> 0x0003ef2f
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Movable zone start PFN for each node
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] early_node_map[2] active PFN ranges
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] 0: 0x00000100 -> 0x0003ef2f
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Using APIC driver default
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Intel MultiProcessor Specification v1.4
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Virtual Wire compatibility mode.
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] MPTABLE: OEM ID:
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] MPTABLE: Product ID: Springdale-G
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] MPTABLE: APIC at: 0xFEE00000
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Processor #0 (Bootup-CPU)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Processors: 1
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Allocating PCI resources starting at 3f000000 (gap: 3f000000:bfcf0000)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6400000 s30976 r0 d22272 u2097152
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255711
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Kernel command line: root=/dev/sda6 ro acpi=off
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Initializing CPU#0
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Initializing HighMem for node 0 (000379fe:0003ef2f)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Memory: 1007736k/1031356k available (2784k kernel code, 23168k reserved, 1435k data, 440k init, 120004k highmem)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] virtual kernel memory layout:
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] .init : 0xc1420000 - 0xc148e000 ( 440 kB)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] .data : 0xc12b8280 - 0xc141f240 (1435 kB)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] .text : 0xc1000000 - 0xc12b8280 (2784 kB)
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Hierarchical RCU implementation.
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] RCU-based detection of stalled CPUs is disabled.
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] NR_IRQS:1280
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Console: colour VGA+ 80x25
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] console [tty0] enabled
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Fast TSC calibration using PIT
Jul 16 11:31:14 hpn2 kernel: [ 0.000000] Detected 1995.106 MHz processor.
Jul 16 11:31:14 hpn2 kernel: [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.21 BogoMIPS (lpj=7980424)
Jul 16 11:31:14 hpn2 kernel: [ 0.004117] pid_max: default: 32768 minimum: 301
Jul 16 11:31:14 hpn2 kernel: [ 0.004265] Security Framework initialized
Jul 16 11:31:14 hpn2 kernel: [ 0.004323] SELinux: Disabled at boot.
Jul 16 11:31:14 hpn2 kernel: [ 0.004421] Mount-cache hash table entries: 512
Jul 16 11:31:14 hpn2 kernel: [ 0.004931] Initializing cgroup subsys ns
Jul 16 11:31:14 hpn2 kernel: [ 0.004991] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Jul 16 11:31:14 hpn2 kernel: [ 0.005062] Initializing cgroup subsys cpuacct
Jul 16 11:31:14 hpn2 kernel: [ 0.005148] Initializing cgroup subsys memory
Jul 16 11:31:14 hpn2 kernel: [ 0.005224] Initializing cgroup subsys devices
Jul 16 11:31:14 hpn2 kernel: [ 0.005279] Initializing cgroup subsys freezer
Jul 16 11:31:14 hpn2 kernel: [ 0.005333] Initializing cgroup subsys net_cls
Jul 16 11:31:14 hpn2 kernel: [ 0.005386] Initializing cgroup subsys blkio
Jul 16 11:31:14 hpn2 kernel: [ 0.005515] CPU0: Hyper-Threading is disabled
Jul 16 11:31:14 hpn2 kernel: [ 0.005573] mce: CPU supports 4 MCE banks
Jul 16 11:31:14 hpn2 kernel: [ 0.005637] CPU0: Thermal monitoring enabled (TM1)
Jul 16 11:31:14 hpn2 kernel: [ 0.008162] SMP alternatives: switching to UP code
Jul 16 11:31:14 hpn2 kernel: [ 0.021301] Freeing SMP alternatives: 16k freed
Jul 16 11:31:14 hpn2 kernel: [ 0.021488] Enabling APIC mode: Flat. Using 1 I/O APICs
Jul 16 11:31:14 hpn2 kernel: [ 0.021604] ExtINT not setup in hardware but reported by MP table
Jul 16 11:31:14 hpn2 kernel: [ 0.021920] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
Jul 16 11:31:14 hpn2 kernel: [ 0.061680] CPU0: Intel(R) Celeron(R) CPU 2.00GHz stepping 09
Jul 16 11:31:14 hpn2 kernel: [ 0.168028] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
Jul 16 11:31:14 hpn2 kernel: [ 0.168164] ... version: 0
Jul 16 11:31:14 hpn2 kernel: [ 0.168216] ... bit width: 40
Jul 16 11:31:14 hpn2 kernel: [ 0.168267] ... generic registers: 18
Jul 16 11:31:14 hpn2 kernel: [ 0.168320] ... value mask: 000000ffffffffff
Jul 16 11:31:14 hpn2 kernel: [ 0.168373] ... max period: 0000007fffffffff
Jul 16 11:31:14 hpn2 kernel: [ 0.168426] ... fixed-purpose events: 0
Jul 16 11:31:14 hpn2 kernel: [ 0.168477] ... event mask: 000000000003ffff
Jul 16 11:31:14 hpn2 kernel: [ 0.169048] NMI watchdog enabled, takes one hw-pmu counter.
Jul 16 11:31:14 hpn2 kernel: [ 0.169214] Brought up 1 CPUs
Jul 16 11:31:14 hpn2 kernel: [ 0.169268] Total of 1 processors activated (3990.21 BogoMIPS).
Jul 16 11:31:14 hpn2 kernel: [ 0.169906] devtmpfs: initialized
Jul 16 11:31:14 hpn2 kernel: [ 0.170402] PM: Registering ACPI NVS region at 3ef2fc00 (1024 bytes)
Jul 16 11:31:14 hpn2 kernel: [ 0.170463] PM: Registering ACPI NVS region at 3ef40000 (720896 bytes)
Jul 16 11:31:14 hpn2 kernel: [ 0.170934] print_constraints: dummy:
Jul 16 11:31:14 hpn2 kernel: [ 0.171139] NET: Registered protocol family 16
Jul 16 11:31:14 hpn2 kernel: [ 0.173357] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=1
Jul 16 11:31:14 hpn2 kernel: [ 0.173418] PCI: Using configuration type 1 for base access
Jul 16 11:31:14 hpn2 kernel: [ 0.174489] bio: create slab <bio-0> at 0
Jul 16 11:31:14 hpn2 kernel: [ 0.174786] ACPI: Interpreter disabled.
Jul 16 11:31:14 hpn2 kernel: [ 0.174989] vgaarb: loaded
Jul 16 11:31:14 hpn2 kernel: [ 0.175127] PCI: Probing PCI hardware
Jul 16 11:31:14 hpn2 kernel: [ 0.175266] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
Jul 16 11:31:14 hpn2 kernel: [ 0.177191] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
Jul 16 11:31:14 hpn2 kernel: [ 0.177393] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
Jul 16 11:31:14 hpn2 kernel: [ 0.178137] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:24d0]
Jul 16 11:31:14 hpn2 kernel: [ 0.178694] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Jul 16 11:31:14 hpn2 kernel: [ 0.178760] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Jul 16 11:31:14 hpn2 kernel: [ 0.178952] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Jul 16 11:31:14 hpn2 kernel: [ 0.184133] Switching to clocksource hpet
Jul 16 11:31:14 hpn2 kernel: [ 0.186575] pnp: PnP ACPI: disabled
Jul 16 11:31:14 hpn2 kernel: [ 0.186636] PnPBIOS: Scanning system for PnP BIOS support...
Jul 16 11:31:14 hpn2 kernel: [ 0.186702] PnPBIOS: Found PnP BIOS installation structure at 0xc00f3e50
Jul 16 11:31:14 hpn2 kernel: [ 0.186760] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x447a, dseg 0xf0000
Jul 16 11:31:14 hpn2 kernel: [ 0.187010] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.187072] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.187131] system 00:00: [mem 0x000e6000-0x000fffff] could not be reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.187190] system 00:00: [mem 0x00100000-0x3ef2fbff] could not be reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.187248] system 00:00: [mem 0x3ef2fc00-0x3ef2ffff] could not be reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.187306] system 00:00: [mem 0x3ef30000-0x3ef3ffff] could not be reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.187365] system 00:00: [mem 0x3ef40000-0x3efeffff] could not be reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.187425] system 00:00: [mem 0x3eff0000-0x3effffff] has been reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.187483] system 00:00: [mem 0xfffffffffecf0000-0xfffffffffecf0fff] could not be reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.187554] system 00:00: [mem 0xfffffffffed20000-0xfffffffffed9ffff] could not be reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.187970] Switched to NOHz mode on CPU #0
Jul 16 11:31:14 hpn2 kernel: [ 0.188977] system 00:0d: [io 0x04d0-0x04d1] has been reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.189040] system 00:0d: [io 0x0cf8-0x0cff] could not be reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.189097] system 00:0d: [io 0x0400-0x047f] has been reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.189154] system 00:0d: [io 0x0500-0x053f] has been reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.189211] system 00:0d: [io 0x0680-0x06ff] has been reserved
Jul 16 11:31:14 hpn2 kernel: [ 0.189462] PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
Jul 16 11:31:14 hpn2 kernel: [ 0.194531] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
Jul 16 11:31:14 hpn2 kernel: [ 0.194602] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
Jul 16 11:31:14 hpn2 kernel: [ 0.194677] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
Jul 16 11:31:14 hpn2 kernel: [ 0.194734] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
Jul 16 11:31:14 hpn2 kernel: [ 0.194794] pci 0000:00:1e.0: bridge window [mem 0xff800000-0xff8fffff]
Jul 16 11:31:14 hpn2 kernel: [ 0.194853] pci 0000:00:1e.0: bridge window [mem pref disabled]
Jul 16 11:31:14 hpn2 kernel: [ 0.195048] NET: Registered protocol family 2
Jul 16 11:31:14 hpn2 kernel: [ 0.195266] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 16 11:31:14 hpn2 kernel: [ 0.195922] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jul 16 11:31:14 hpn2 kernel: [ 0.197207] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jul 16 11:31:14 hpn2 kernel: [ 0.197849] TCP: Hash tables configured (established 131072 bind 65536)
Jul 16 11:31:14 hpn2 kernel: [ 0.197911] TCP reno registered
Jul 16 11:31:14 hpn2 kernel: [ 0.197972] UDP hash table entries: 512 (order: 2, 16384 bytes)
Jul 16 11:31:14 hpn2 kernel: [ 0.198043] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Jul 16 11:31:14 hpn2 kernel: [ 0.198432] NET: Registered protocol family 1
Jul 16 11:31:14 hpn2 kernel: [ 0.198662] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
Jul 16 11:31:14 hpn2 kernel: [ 0.198835] Unpacking initramfs...
Jul 16 11:31:14 hpn2 kernel: [ 0.725744] Freeing initrd memory: 8920k freed
Jul 16 11:31:14 hpn2 kernel: [ 0.737548] audit: initializing netlink socket (disabled)
Jul 16 11:31:14 hpn2 kernel: [ 0.737627] type=2000 audit(1310815859.736:1): initialized
Jul 16 11:31:14 hpn2 kernel: [ 0.762865] highmem bounce pool size: 64 pages
Jul 16 11:31:14 hpn2 kernel: [ 0.762933] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jul 16 11:31:14 hpn2 kernel: [ 0.763691] VFS: Disk quotas dquot_6.5.2
Jul 16 11:31:14 hpn2 kernel: [ 0.763884] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul 16 11:31:14 hpn2 kernel: [ 0.764226] msgmni has been set to 1751
Jul 16 11:31:14 hpn2 kernel: [ 0.767439] alg: No test for stdrng (krng)
Jul 16 11:31:14 hpn2 kernel: [ 0.767588] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jul 16 11:31:14 hpn2 kernel: [ 0.767661] io scheduler noop registered
Jul 16 11:31:14 hpn2 kernel: [ 0.767712] io scheduler deadline registered
Jul 16 11:31:14 hpn2 kernel: [ 0.767791] io scheduler cfq registered (default)
Jul 16 11:31:14 hpn2 kernel: [ 0.768387] isapnp: Scanning for PnP cards...
Jul 16 11:31:14 hpn2 kernel: [ 1.122579] isapnp: No Plug & Play device found
Jul 16 11:31:14 hpn2 kernel: [ 1.122816] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jul 16 11:31:14 hpn2 kernel: [ 1.143272] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 16 11:31:14 hpn2 kernel: [ 1.164457] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 16 11:31:14 hpn2 kernel: [ 1.165001] Linux agpgart interface v0.103
Jul 16 11:31:14 hpn2 kernel: [ 1.165222] agpgart-intel 0000:00:00.0: Intel 865 Chipset
Jul 16 11:31:14 hpn2 kernel: [ 1.165316] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
Jul 16 11:31:14 hpn2 kernel: [ 1.165494] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
Jul 16 11:31:14 hpn2 kernel: [ 1.165750] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
Jul 16 11:31:14 hpn2 kernel: [ 1.166094] i8042: PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
Jul 16 11:31:14 hpn2 kernel: [ 1.169274] serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 16 11:31:14 hpn2 kernel: [ 1.169346] serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 16 11:31:14 hpn2 kernel: [ 1.169761] mousedev: PS/2 mouse device common for all mice
Jul 16 11:31:14 hpn2 kernel: [ 1.170092] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Jul 16 11:31:14 hpn2 kernel: [ 1.170186] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
Jul 16 11:31:14 hpn2 kernel: [ 1.170275] cpuidle: using governor ladder
Jul 16 11:31:14 hpn2 kernel: [ 1.170330] cpuidle: using governor menu
Jul 16 11:31:14 hpn2 kernel: [ 1.170828] TCP cubic registered
Jul 16 11:31:14 hpn2 kernel: [ 1.170965] NET: Registered protocol family 10
Jul 16 11:31:14 hpn2 kernel: [ 1.172293] Mobile IPv6
Jul 16 11:31:14 hpn2 kernel: [ 1.172355] NET: Registered protocol family 17
Jul 16 11:31:14 hpn2 kernel: [ 1.172421] Registering the dns_resolver key type
Jul 16 11:31:14 hpn2 kernel: [ 1.172541] Using IPI No-Shortcut mode
Jul 16 11:31:14 hpn2 kernel: [ 1.172898] registered taskstats version 1
Jul 16 11:31:14 hpn2 kernel: [ 1.173362] rtc_cmos 00:04: setting system clock to 2011-07-16 11:31:01 UTC (1310815861)
Jul 16 11:31:14 hpn2 kernel: [ 1.173478] Initializing network drop monitor service
Jul 16 11:31:14 hpn2 kernel: [ 1.173759] Freeing unused kernel memory: 440k freed
Jul 16 11:31:14 hpn2 kernel: [ 1.174379] Write protecting the kernel text: 2788k
Jul 16 11:31:14 hpn2 kernel: [ 1.174480] Write protecting the kernel read-only data: 1032k
Jul 16 11:31:14 hpn2 kernel: [ 1.196304] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Jul 16 11:31:14 hpn2 kernel: [ 1.422404] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
Jul 16 11:31:14 hpn2 kernel: [ 1.422467] e100: Copyright(c) 1999-2006 Intel Corporation
Jul 16 11:31:14 hpn2 kernel: [ 1.422608] e100 0000:01:08.0: PCI->APIC IRQ transform: INT A -> IRQ 20
Jul 16 11:31:14 hpn2 kernel: [ 1.459918] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Jul 16 11:31:14 hpn2 kernel: [ 1.674464] e100 0000:01:08.0: eth0: addr 0xff8fe000, irq 20, MAC addr 00:0c:f1:fd:55:46
Jul 16 11:31:14 hpn2 kernel: [ 1.674580] 8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
Jul 16 11:31:14 hpn2 kernel: [ 1.685320] usbcore: registered new interface driver usbfs
Jul 16 11:31:14 hpn2 kernel: [ 1.685430] usbcore: registered new interface driver hub
Jul 16 11:31:14 hpn2 kernel: [ 1.685596] usbcore: registered new device driver usb
Jul 16 11:31:14 hpn2 kernel: [ 1.695216] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jul 16 11:31:14 hpn2 kernel: [ 1.695335] ehci_hcd 0000:00:1d.7: PCI->APIC IRQ transform: INT D -> IRQ 23
Jul 16 11:31:14 hpn2 kernel: [ 1.695429] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jul 16 11:31:14 hpn2 kernel: [ 1.695553] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Jul 16 11:31:14 hpn2 kernel: [ 1.695677] ehci_hcd 0000:00:1d.7: debug port 1
Jul 16 11:31:14 hpn2 kernel: [ 1.706751] 8139too: 8139too Fast Ethernet driver 0.9.28
Jul 16 11:31:14 hpn2 kernel: [ 1.706896] 8139too 0000:01:05.0: PCI->APIC IRQ transform: INT A -> IRQ 17
Jul 16 11:31:14 hpn2 kernel: [ 1.719713] 8139too 0000:01:05.0: eth1: RealTek RTL8139 at 0xc800, 00:08:a1:50:41:20, IRQ 17
Jul 16 11:31:14 hpn2 kernel: [ 1.725196] SCSI subsystem initialized
Jul 16 11:31:14 hpn2 kernel: [ 1.736149] Refined TSC clocksource calibration: 1995.128 MHz.
Jul 16 11:31:14 hpn2 kernel: [ 1.736217] Switching to clocksource tsc
Jul 16 11:31:14 hpn2 kernel: [ 1.743504] uhci_hcd: USB Universal Host Controller Interface driver
Jul 16 11:31:14 hpn2 kernel: [ 1.744274] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa7fc00
Jul 16 11:31:14 hpn2 kernel: [ 1.800482] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Jul 16 11:31:14 hpn2 kernel: [ 1.800621] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jul 16 11:31:14 hpn2 kernel: [ 1.800682] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 16 11:31:14 hpn2 kernel: [ 1.800750] usb usb1: Product: EHCI Host Controller
Jul 16 11:31:14 hpn2 kernel: [ 1.800804] usb usb1: Manufacturer: Linux 2.6.39-2-686-pae ehci_hcd
Jul 16 11:31:14 hpn2 kernel: [ 1.800860] usb usb1: SerialNumber: 0000:00:1d.7
Jul 16 11:31:14 hpn2 kernel: [ 1.811893] hub 1-0:1.0: USB hub found
Jul 16 11:31:14 hpn2 kernel: [ 1.811967] hub 1-0:1.0: 8 ports detected
Jul 16 11:31:14 hpn2 kernel: [ 1.812281] uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 16
Jul 16 11:31:14 hpn2 kernel: [ 1.812367] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jul 16 11:31:14 hpn2 kernel: [ 1.812444] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Jul 16 11:31:14 hpn2 kernel: [ 1.812554] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00
Jul 16 11:31:14 hpn2 kernel: [ 1.812676] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jul 16 11:31:14 hpn2 kernel: [ 1.812737] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 16 11:31:14 hpn2 kernel: [ 1.812805] usb usb2: Product: UHCI Host Controller
Jul 16 11:31:14 hpn2 kernel: [ 1.812858] usb usb2: Manufacturer: Linux 2.6.39-2-686-pae uhci_hcd
Jul 16 11:31:14 hpn2 kernel: [ 1.812913] usb usb2: SerialNumber: 0000:00:1d.0
Jul 16 11:31:14 hpn2 kernel: [ 1.813272] hub 2-0:1.0: USB hub found
Jul 16 11:31:14 hpn2 kernel: [ 1.813339] hub 2-0:1.0: 2 ports detected
Jul 16 11:31:14 hpn2 kernel: [ 1.813769] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
Jul 16 11:31:14 hpn2 kernel: [ 1.813845] ata_piix 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 18
Jul 16 11:31:14 hpn2 kernel: [ 1.817326] scsi0 : ata_piix
Jul 16 11:31:14 hpn2 kernel: [ 1.820598] scsi1 : ata_piix
Jul 16 11:31:14 hpn2 kernel: [ 1.820797] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
Jul 16 11:31:14 hpn2 kernel: [ 1.820860] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Jul 16 11:31:14 hpn2 kernel: [ 1.821401] uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
Jul 16 11:31:14 hpn2 kernel: [ 1.821486] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jul 16 11:31:14 hpn2 kernel: [ 1.821566] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Jul 16 11:31:14 hpn2 kernel: [ 1.821680] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
Jul 16 11:31:14 hpn2 kernel: [ 1.821806] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jul 16 11:31:14 hpn2 kernel: [ 1.821868] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 16 11:31:14 hpn2 kernel: [ 1.821935] usb usb3: Product: UHCI Host Controller
Jul 16 11:31:14 hpn2 kernel: [ 1.821989] usb usb3: Manufacturer: Linux 2.6.39-2-686-pae uhci_hcd
Jul 16 11:31:14 hpn2 kernel: [ 1.822045] usb usb3: SerialNumber: 0000:00:1d.1
Jul 16 11:31:14 hpn2 kernel: [ 1.822396] hub 3-0:1.0: USB hub found
Jul 16 11:31:14 hpn2 kernel: [ 1.822464] hub 3-0:1.0: 2 ports detected
Jul 16 11:31:14 hpn2 kernel: [ 1.822657] uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
Jul 16 11:31:14 hpn2 kernel: [ 1.822743] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jul 16 11:31:14 hpn2 kernel: [ 1.822818] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Jul 16 11:31:14 hpn2 kernel: [ 1.822929] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
Jul 16 11:31:14 hpn2 kernel: [ 1.823050] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Jul 16 11:31:14 hpn2 kernel: [ 1.823111] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 16 11:31:14 hpn2 kernel: [ 1.823178] usb usb4: Product: UHCI Host Controller
Jul 16 11:31:14 hpn2 kernel: [ 1.823232] usb usb4: Manufacturer: Linux 2.6.39-2-686-pae uhci_hcd
Jul 16 11:31:14 hpn2 kernel: [ 1.823288] usb usb4: SerialNumber: 0000:00:1d.2
Jul 16 11:31:14 hpn2 kernel: [ 1.823609] hub 4-0:1.0: USB hub found
Jul 16 11:31:14 hpn2 kernel: [ 1.823676] hub 4-0:1.0: 2 ports detected
Jul 16 11:31:14 hpn2 kernel: [ 1.823862] uhci_hcd 0000:00:1d.3: PCI->APIC IRQ transform: INT A -> IRQ 16
Jul 16 11:31:14 hpn2 kernel: [ 1.823942] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jul 16 11:31:14 hpn2 kernel: [ 1.825648] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Jul 16 11:31:14 hpn2 kernel: [ 1.825766] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800
Jul 16 11:31:14 hpn2 kernel: [ 1.825892] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Jul 16 11:31:14 hpn2 kernel: [ 1.825952] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 16 11:31:14 hpn2 kernel: [ 1.826019] usb usb5: Product: UHCI Host Controller
Jul 16 11:31:14 hpn2 kernel: [ 1.826073] usb usb5: Manufacturer: Linux 2.6.39-2-686-pae uhci_hcd
Jul 16 11:31:14 hpn2 kernel: [ 1.826129] usb usb5: SerialNumber: 0000:00:1d.3
Jul 16 11:31:14 hpn2 kernel: [ 1.826786] hub 5-0:1.0: USB hub found
Jul 16 11:31:14 hpn2 kernel: [ 1.826857] hub 5-0:1.0: 2 ports detected
Jul 16 11:31:14 hpn2 kernel: [ 1.992361] ata2.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
Jul 16 11:31:14 hpn2 kernel: [ 2.008223] ata2.00: configured for UDMA/33
Jul 16 11:31:14 hpn2 kernel: [ 2.012639] ata1.00: ATA-5: ST320423A, 3.02, max UDMA/66
Jul 16 11:31:14 hpn2 kernel: [ 2.012699] ata1.00: 40011300 sectors, multi 32: LBA
Jul 16 11:31:14 hpn2 kernel: [ 2.013145] ata1.01: ATA-5: ST380021A, 3.19, max UDMA/100
Jul 16 11:31:14 hpn2 kernel: [ 2.013203] ata1.01: 156301488 sectors, multi 16: LBA
Jul 16 11:31:14 hpn2 kernel: [ 2.013261] ata1.00: limited to UDMA/33 due to 40-wire cable
Jul 16 11:31:14 hpn2 kernel: [ 2.013316] ata1.01: limited to UDMA/33 due to 40-wire cable
Jul 16 11:31:14 hpn2 kernel: [ 2.028446] ata1.00: configured for UDMA/33
Jul 16 11:31:14 hpn2 kernel: [ 2.044348] ata1.01: configured for UDMA/33
Jul 16 11:31:14 hpn2 kernel: [ 2.044677] scsi 0:0:0:0: Direct-Access ATA ST320423A 3.02 PQ: 0 ANSI: 5
Jul 16 11:31:14 hpn2 kernel: [ 2.045621] scsi 0:0:1:0: Direct-Access ATA ST380021A 3.19 PQ: 0 ANSI: 5
Jul 16 11:31:14 hpn2 kernel: [ 2.047770] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5
Jul 16 11:31:14 hpn2 kernel: [ 2.105192] sd 0:0:0:0: [sda] 40011300 512-byte logical blocks: (20.4 GB/19.0 GiB)
Jul 16 11:31:14 hpn2 kernel: [ 2.105476] sd 0:0:0:0: [sda] Write Protect is off
Jul 16 11:31:14 hpn2 kernel: [ 2.105626] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 16 11:31:14 hpn2 kernel: [ 2.107243] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Jul 16 11:31:14 hpn2 kernel: [ 2.107311] cdrom: Uniform CD-ROM driver Revision: 3.20
Jul 16 11:31:14 hpn2 kernel: [ 2.112829] sd 0:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Jul 16 11:31:14 hpn2 kernel: [ 2.113104] sd 0:0:1:0: [sdb] Write Protect is off
Jul 16 11:31:14 hpn2 kernel: [ 2.113250] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 16 11:31:14 hpn2 kernel: [ 2.143630] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Jul 16 11:31:14 hpn2 kernel: [ 2.191738] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
Jul 16 11:31:14 hpn2 kernel: [ 2.192843] sd 0:0:0:0: [sda] Attached SCSI disk
Jul 16 11:31:14 hpn2 kernel: [ 2.193226] sd 0:0:1:0: [sdb] Attached SCSI disk
Jul 16 11:31:14 hpn2 kernel: [ 2.234577] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jul 16 11:31:14 hpn2 kernel: [ 2.236461] sd 0:0:1:0: Attached scsi generic sg1 type 0
Jul 16 11:31:14 hpn2 kernel: [ 2.238176] sr 1:0:0:0: Attached scsi generic sg2 type 5
Jul 16 11:31:14 hpn2 kernel: [ 2.308051] usb 2-1: new low speed USB device number 2 using uhci_hcd
Jul 16 11:31:14 hpn2 kernel: [ 2.510554] usb 2-1: New USB device found, idVendor=051d, idProduct=0002
Jul 16 11:31:14 hpn2 kernel: [ 2.510620] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
Jul 16 11:31:14 hpn2 kernel: [ 2.510678] usb 2-1: Product: Back-UPS ES 350 FW:823.B1.D USB FW:B1
Jul 16 11:31:14 hpn2 kernel: [ 2.510735] usb 2-1: Manufacturer: APC
Jul 16 11:31:14 hpn2 kernel: [ 2.510787] usb 2-1: SerialNumber: 3B0725X29613
Jul 16 11:31:14 hpn2 kernel: [ 2.980732] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 350 FW:823.B1.D USB FW:B1] on usb-0000:00:1d.0-1/input0
Jul 16 11:31:14 hpn2 kernel: [ 2.981471] usbcore: registered new interface driver usbhid
Jul 16 11:31:14 hpn2 kernel: [ 2.984278] usbhid: USB HID core driver
Jul 16 11:31:14 hpn2 kernel: [ 4.650139] PM: Starting manual resume from disk
Jul 16 11:31:14 hpn2 kernel: [ 7.896860] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jul 16 11:31:14 hpn2 kernel: [ 7.989656] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jul 16 11:31:14 hpn2 kernel: [ 8.411901] intel_rng: Firmware space is locked read-only. If you can't or
Jul 16 11:31:14 hpn2 kernel: [ 8.411906] intel_rng: don't want to disable this in firmware setup, and if
Jul 16 11:31:14 hpn2 kernel: [ 8.411909] intel_rng: you are certain that your system has a functional
Jul 16 11:31:14 hpn2 kernel: [ 8.411911] intel_rng: RNG, try using the 'no_fwh_detect' option.
Jul 16 11:31:14 hpn2 kernel: [ 8.814926] input: PC Speaker as /devices/platform/pcspkr/input/input1
Jul 16 11:31:14 hpn2 kernel: [ 8.887140] i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT B -> IRQ 17
Jul 16 11:31:14 hpn2 kernel: [ 9.395513] Intel ICH 0000:00:1f.5: PCI->APIC IRQ transform: INT B -> IRQ 17
Jul 16 11:31:14 hpn2 kernel: [ 9.820163] intel8x0_measure_ac97_clock: measured 55649 usecs (2681 samples)
Jul 16 11:31:14 hpn2 kernel: [ 9.820227] intel8x0: clocking to 48000
Jul 16 11:31:14 hpn2 kernel: [ 10.139785] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input2
Jul 16 11:31:14 hpn2 kernel: [ 11.564307] Adding 249444k swap on /dev/sdb6. Priority:-1 extents:1 across:249444k
Jul 16 11:31:14 hpn2 kernel: [ 12.059691] loop: module loaded
Jul 16 11:31:14 hpn2 kernel: [ 13.298677] 8139too 0000:01:05.0: eth0: link down
Jul 16 11:31:14 hpn2 kernel: [ 13.299961] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul 16 11:31:48 hpn2 kernel: [ 48.752031] usb 2-2: new full speed USB device number 3 using uhci_hcd
Jul 16 11:31:48 hpn2 kernel: [ 48.931837] usb 2-2: New USB device found, idVendor=1630, idProduct=0042
Jul 16 11:31:48 hpn2 kernel: [ 48.931901] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jul 16 11:31:48 hpn2 kernel: [ 48.931959] usb 2-2: Product: 2Wire USB Remote NDIS Ethernet
Jul 16 11:31:48 hpn2 kernel: [ 48.932039] usb 2-2: Manufacturer: 2Wire Inc
Jul 16 11:31:48 hpn2 kernel: [ 49.058511] usbcore: registered new interface driver cdc_ether
Jul 16 11:32:49 hpn2 kernel: [ 109.329823] rndis_host: probe of 2-2:1.0 failed with error -110
Jul 16 11:32:49 hpn2 kernel: [ 109.329953] usbcore: registered new interface driver rndis_host
Jul 16 11:32:49 hpn2 kernel: [ 109.431160] cfg80211: Calling CRDA to update world regulatory domain
Jul 16 11:32:54 hpn2 kernel: [ 114.478067] rndis_wlan: probe of 2-2:1.0 failed with error -110
Jul 16 11:32:54 hpn2 kernel: [ 114.478822] usbcore: registered new interface driver rndis_wlan
Jul 16 11:36:50 hpn2 kernel: [ 350.840083] usb 2-2: USB disconnect, device number 3
Jul 16 11:38:49 hpn2 kernel: [ 469.492037] usb 3-1: new full speed USB device number 2 using uhci_hcd
Jul 16 11:38:49 hpn2 kernel: [ 469.670993] usb 3-1: New USB device found, idVendor=1630, idProduct=0011
Jul 16 11:38:49 hpn2 kernel: [ 469.671057] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jul 16 11:38:49 hpn2 kernel: [ 469.671115] usb 3-1: Product: 2Wire PC Port
Jul 16 11:38:49 hpn2 kernel: [ 469.671167] usb 3-1: Manufacturer: 2Wire Inc
 
Old 07-22-2011, 12:02 AM
Ben Hutchings
 
Default Bug#627098: linux-image-2.6.32-5-686: rndis_host fails to recognize usb device

On Sat, 2011-07-16 at 11:59 -0400, Mark Glassberg wrote:
> On Wed, Jul 13, 2011 at 12:55:44PM +0000, Ben Hutchings wrote:
> > Can you try a newer version (2.6.39 from testing/unstable or 3.0-rc6 from
> > experimental)?
>
> I don't know if 2.6.39 can be used on my squeeze system, so I burned the
> first cd of wheeze and installed it. The installer had problems with my
> usb modem/router, so I finished the install and rebooted without it. I
> then connected the usb modem/router, but the kernel and/or rndis_host
> failed.

That's annoying, because we got that device working... but it looks like
I dropped the bug fix from the Debian package of 2.6.39. However the
bug fix will be back again in Linux 3.0.

> I then disconnected the usb modem/router and connected the PC Port.
> Again, it failed. The /var/log/messages file is attached.
>
> Please let me know if there are any arguments which should be used with
> rndis_host or any of the other modules. Also, was it necessary to install
> wheeze?

It shouldn't be, but you would need to upgrade initramfs-tools and
linux-base as well as the linux-image-* package.

> And finally, how do I go about using 3.0-rc6?

You would first have to add a line to /etc/apt/sources.list referring to
a mirror of the 'experimental' suite.

Please can you test the attached patch against the experimental version,
following the instructions at:
<http://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s-common-official>.

Ben.

--
Ben Hutchings
Absolutum obsoletum. (If it works, it's out of date.) - Stafford Beer
 
Old 07-25-2011, 01:38 PM
Mark Glassberg
 
Default Bug#627098: linux-image-2.6.32-5-686: rndis_host fails to recognize usb device

On Fri, Jul 22, 2011 at 02:02:25AM +0200, Ben Hutchings wrote:
> On Sat, 2011-07-16 at 11:59 -0400, Mark Glassberg wrote:
> > On Wed, Jul 13, 2011 at 12:55:44PM +0000, Ben Hutchings wrote:
> > > Can you try a newer version (2.6.39 from testing/unstable or 3.0-rc6 from
> > > experimental)?
> >
> > I don't know if 2.6.39 can be used on my squeeze system, so I burned the
> > first cd of wheeze and installed it. The installer had problems with my
> > usb modem/router, so I finished the install and rebooted without it. I
> > then connected the usb modem/router, but the kernel and/or rndis_host
> > failed.
>
> That's annoying, because we got that device working... but it looks like
> I dropped the bug fix from the Debian package of 2.6.39. However the
> bug fix will be back again in Linux 3.0.
>
> > I then disconnected the usb modem/router and connected the PC Port.
> > Again, it failed. The /var/log/messages file is attached.
> >
> > Please let me know if there are any arguments which should be used with
> > rndis_host or any of the other modules. Also, was it necessary to install
> > wheeze?
>
> It shouldn't be, but you would need to upgrade initramfs-tools and
> linux-base as well as the linux-image-* package.
>
> > And finally, how do I go about using 3.0-rc6?
>
> You would first have to add a line to /etc/apt/sources.list referring to
> a mirror of the 'experimental' suite.
>
> Please can you test the attached patch against the experimental version,
> following the instructions at:
> <http://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s-common-official>.
>
> Ben.
>
> --
> Ben Hutchings
> Absolutum obsoletum. (If it works, it's out of date.) - Stafford Beer

> From afa0c8df93e460eabb63aa1afcc044bc000affc5 Mon Sep 17 00:00:00 2001
> From: Ben Hutchings <ben@decadent.org.uk>
> Date: Fri, 22 Jul 2011 01:56:57 +0200
> Subject: [PATCH] rndis_host: Poll status before control channel on 2Wire PC
> Port
>
> Apply the RNDIS_DRIVER_DATA_POLL_STATUS quirk to this device.
>
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
> drivers/net/usb/rndis_host.c | 5 +++++
> 1 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
> index 255d6a4..067db14 100644
> --- a/drivers/net/usb/rndis_host.c
> +++ b/drivers/net/usb/rndis_host.c
> @@ -610,6 +610,11 @@ static const struct usb_device_id products [] = {
> USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
> .driver_info = (unsigned long) &rndis_poll_status_info,
> }, {
> + /* 2Wire PC Port */
> + USB_DEVICE_AND_INTERFACE_INFO(0x1630, 0x0011,
> + USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
> + .driver_info = (unsigned long) &rndis_poll_status_info,
> +}, {
> /* RNDIS is MSFT's un-official variant of CDC ACM */
> USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
> .driver_info = (unsigned long) &rndis_info,
> --
> 1.7.5.4
>

I booted the 3.0 kernel and both devices were recognized. I then unplugged
both, removed /etc/network/interfaces, and rebooted. When I plugged in the
PC Port, I got the following messages:

[ 106.024038] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 106.203038] usb 3-1: New USB device found, idVendor=1630, idProduct=0011
[ 106.203105] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 106.203163] usb 3-1: Product: 2Wire PC Port
[ 106.203215] usb 3-1: Manufacturer: 2Wire Inc
[ 106.312267] usbcore: registered new interface driver cdc_ether
[ 106.346573] rndis_host 3-1:1.0: eth2: register 'rndis_host' at usb-0000:00:1d.1-1, RNDIS device (poll status before control), 00:d0:9e:3c:25:ed
[ 106.347424] usbcore: registered new interface driver rndis_host
[ 106.432669] cfg80211: Calling CRDA to update world regulatory domain
[ 106.465011] usbcore: registered new interface driver rndis_wlan
[ 106.556970] udev[327]: renamed network interface eth2 to eth4

I then created a new /etc/network/interfaces for eth4. Unfortunately, when I
enteered "ifup eth4" I got the following messages:

[ 170.280070] usb 3-1: USB disconnect, device number 2
[ 170.281850] rndis_host 3-1:1.0: eth4: unregister 'rndis_host' usb-0000:00:1d.1-1, RNDIS device (poll status before control)

It looks like the kernel disconnected the device, so I couldn't configure it or
bring it up.

Mark



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/20110725133816.GA1242@hpn2@localnet.net
 

Thread Tools




All times are GMT. The time now is 12:19 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org