FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-17-2011, 03:53 AM
Ben Hutchings
 
Default Bug#625738: >2TB SCSI disk size not recognized correctly

On Thu, 2011-05-05 at 11:03 -0400, Greg Wooledge wrote:
> Package: linux-image-2.6.32-5-686
> Version: 2.6.32-31
>
> I upgraded a machine from Lenny to Squeeze, and it failed to mount one
> of the disks. Here is a large swath of dmesg from the failing kernel:
[...]
> [ 8.343674] sd 4:0:0:0: [sdb] 4294967296 512-byte logical blocks: (2.19 TB/2.00 TiB)

So we initially see exactly 2 TiB (2^32 blocks)...

> [ 8.344551] usbcore: registered new interface driver hiddev
> [ 8.344741] sd 4:0:0:0: [sdb] Write Protect is off
> [ 8.344745] sd 4:0:0:0: [sdb] Mode Sense: bf 00 00 08
> [ 8.345180] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 8.345421] sda1 sda2
> [ 8.345672] sd 2:0:0:0: [sda] Attached SCSI disk
> [ 8.345973] sd 4:0:0:0: [sdb] 13651132416 512-byte logical blocks: (6.98 TB/6.35 TiB)
> [ 8.347305] sdb: detected capacity change from 2199023255552 to 6989379796992

but then we find it's really 6.35 TiB (is that the correct value?)...

> [ 8.347310] sdb:
> [ 8.348685] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.348837] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.348986] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.349135] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.349286] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.349435] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.349442] sd 4:0:0:0: [sdb] Unhandled error code
> [ 8.349444] sd 4:0:0:0: [sdb] Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK
> [ 8.349449] sd 4:0:0:0: [sdb] CDB: Read(16): 88 00 00 00 00 03 2d ab bf f8 00 00 00 08 00 00
> [ 8.349461] end_request: I/O error, dev sdb, sector 13651132408
> [ 8.349520] Buffer I/O error on device sdb, logical block 1706391551

but we can't read the last logical block (4 KiB).

> [ 8.349732] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.349886] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.350046] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.350196] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.350347] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.350497] Errataon LSI53C1030 occurred.sc->req_bufflen=0x1000,xfer_cnt=0x00
> [ 8.350503] sd 4:0:0:0: [sdb] Unhandled error code
> [ 8.350505] sd 4:0:0:0: [sdb] Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK
> [ 8.350509] sd 4:0:0:0: [sdb] CDB: Read(16): 88 00 00 00 00 03 2d ab bf f8 00 00 00 08 00 00
> [ 8.350520] end_request: I/O error, dev sdb, sector 13651132408
> [ 8.350576] Buffer I/O error on device sdb, logical block 1706391551

Same error on retry.

[...]
> The device in question is a hardware RAID (multiple SATA disks presented
> as one SCSI device). I can attempt to get model numbers and so on if
> those are relevant.

Please send a full kernel boot log, and the output of 'lspci -vnn'.

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.
 
Old 05-17-2011, 12:06 PM
Greg Wooledge
 
Default Bug#625738: >2TB SCSI disk size not recognized correctly

On Tue, May 17, 2011 at 04:53:46AM +0100, Ben Hutchings wrote:
> > [ 8.343674] sd 4:0:0:0: [sdb] 4294967296 512-byte logical blocks: (2.19 TB/2.00 TiB)
>
> So we initially see exactly 2 TiB (2^32 blocks)...
>
> > [ 8.344551] usbcore: registered new interface driver hiddev
> > [ 8.344741] sd 4:0:0:0: [sdb] Write Protect is off
> > [ 8.344745] sd 4:0:0:0: [sdb] Mode Sense: bf 00 00 08
> > [ 8.345180] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 8.345421] sda1 sda2
> > [ 8.345672] sd 2:0:0:0: [sda] Attached SCSI disk
> > [ 8.345973] sd 4:0:0:0: [sdb] 13651132416 512-byte logical blocks: (6.98 TB/6.35 TiB)
> > [ 8.347305] sdb: detected capacity change from 2199023255552 to 6989379796992
>
> but then we find it's really 6.35 TiB (is that the correct value?)...

Yes. As seen under 2.6.26:

megsvr1:/var/log# fdisk -l /dev/sdc

WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted.


Disk /dev/sdc: 6989.4 GB, 6989379796992 bytes
255 heads, 63 sectors/track, 849743 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sdc1 1 267350 2147483647+ ee GPT


> Please send a full kernel boot log, and the output of 'lspci -vnn'.

I'm not sure whether you meant a working-kernel boot log, or a
non-working-kernel boot log, so I'm attaching one of each. They are
both taken from /var/log/kern.log.2.gz (decompressed and then edited).

Here is lspci -vnn (running with the 2.6.26 kernel):

00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
Subsystem: Oracle Corporation Device [108e:534c]
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-

00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0364] (rev a3)
Subsystem: Oracle Corporation Device [108e:534c]
Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
Subsystem: Oracle Corporation Device [108e:534c]
Flags: 66MHz, fast devsel, IRQ 5
I/O ports at bc00 [size=64]
I/O ports at 2d00 [size=64]
I/O ports at 2e00 [size=64]
Capabilities: [44] Power Management version 2
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10 [OHCI])
Subsystem: Oracle Corporation Device [108e:534c]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fcffb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20 [EHCI])
Subsystem: Oracle Corporation Device [108e:534c]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fcffac00 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Oracle Corporation Device [108e:534c]
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at ffa0 [size=16]
Capabilities: [44] Power Management version 2
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx

00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Oracle Corporation Device [108e:534c]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
I/O ports at b480 [size=8]
I/O ports at b400 [size=4]
I/O ports at b080 [size=8]
I/O ports at b000 [size=4]
I/O ports at ac00 [size=16]
Memory at fcff9000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv

00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fd000000-fdafffff
Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-

00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
Subsystem: Oracle Corporation Device [108e:534c]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at fcff8000 (32-bit, non-prefetchable) [size=4K]
I/O ports at a880 [size=8]
Memory at fcffa800 (32-bit, non-prefetchable) [size=256]
Memory at fcffa400 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Capabilities: [70] MSI-X: Enable- Count=8 Masked-
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth

00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
Subsystem: Oracle Corporation Device [108e:534c]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fcff7000 (32-bit, non-prefetchable) [size=4K]
I/O ports at a800 [size=8]
Memory at fcffa000 (32-bit, non-prefetchable) [size=256]
Memory at fcff6c00 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Capabilities: [70] MSI-X: Enable- Count=8 Masked-
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth

00:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000efff
Memory behind bridge: fdb00000-fdefffff
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:0b.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:0c.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
Memory behind bridge: fdf00000-fdffffff
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Flags: fast devsel
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp

01:05.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (prog-if 00 [VGA controller])
Subsystem: Oracle Corporation Device [108e:534c]
Flags: 66MHz, medium devsel, IRQ 11
Memory at fd000000 (32-bit, non-prefetchable) [size=8M]
Memory at fdae0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at cc00 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Power Management version 2

02:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8114 PCI Express-to-PCI/PCI-X Bridge [10b5:8114] (rev bc) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Memory at fdbfe000 (32-bit, non-prefetchable) [size=8K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000d000-0000efff
Memory behind bridge: fdc00000-fdefffff
Capabilities: [40] Power Management version 3
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [58] PCI-X bridge device
Capabilities: [68] Express PCI/PCI-X Bridge, MSI 00
Kernel modules: shpchp

03:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 08)
Subsystem: LSI Logic / Symbios Logic Device [1000:10b0]
Flags: bus master, 66MHz, medium devsel, latency 72, IRQ 19
I/O ports at e000 [size=256]
Memory at fdee0000 (64-bit, non-prefetchable) [size=128K]
Memory at fdec0000 (64-bit, non-prefetchable) [size=128K]
Expansion ROM at fdd00000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [68] PCI-X non-bridge device
Capabilities: [70] CompactPCI hot-swap <?>
Kernel driver in use: mptspi
Kernel modules: mptspi

03:08.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 08)
Subsystem: LSI Logic / Symbios Logic Device [1000:10b0]
Flags: bus master, 66MHz, medium devsel, latency 72, IRQ 18
I/O ports at d000 [size=256]
Memory at fdea0000 (64-bit, non-prefetchable) [size=128K]
Memory at fde80000 (64-bit, non-prefetchable) [size=128K]
Expansion ROM at fdc00000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [68] PCI-X non-bridge device
Capabilities: [70] #00 [0000]
Kernel driver in use: mptspi
Kernel modules: mptspi

06:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=06, secondary=07, subordinate=07, sec-latency=64
Memory behind bridge: fdf00000-fdffffff
Capabilities: [60] Express PCI/PCI-X Bridge, MSI 00
Capabilities: [90] PCI-X bridge device
Capabilities: [b0] Power Management version 2
Kernel modules: shpchp

07:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet [14e4:1678] (rev a3)
Subsystem: Oracle Corporation Device [108e:534c]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 217
Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
Memory at fdfe0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [40] PCI-X non-bridge device
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] MSI: Enable+ Count=1/8 Maskable- 64bit+
Kernel driver in use: tg3
Kernel modules: tg3

07:04.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet [14e4:1678] (rev a3)
Subsystem: Oracle Corporation Device [108e:534c]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fdfc0000 (64-bit, non-prefetchable) [size=64K]
Memory at fdfb0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Kernel driver in use: tg3
Kernel modules: tg3

May 5 11:25:44 megsvr1 kernel: imklog 4.6.4, log source = /proc/kmsg started.
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Initializing cgroup subsys cpuset
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Initializing cgroup subsys cpu
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-26lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Jan 27 00:28:05 UTC 2011
May 5 11:25:44 megsvr1 kernel: [ 0.000000] BIOS-provided physical RAM map:
May 5 11:25:44 megsvr1 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fffe000 (ACPI data)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] BIOS-e820: 000000005fffe000 - 0000000060000000 (ACPI NVS)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] 639MB HIGHMEM available.
May 5 11:25:44 megsvr1 kernel: [ 0.000000] 896MB LOWMEM available.
May 5 11:25:44 megsvr1 kernel: [ 0.000000] found SMP MP-table at [c00ff780] 000ff780
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Entering add_active_range(0, 0, 393200) 0 entries of 256 used
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Zone PFN ranges:
May 5 11:25:44 megsvr1 kernel: [ 0.000000] DMA 0 -> 4096
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Normal 4096 -> 229376
May 5 11:25:44 megsvr1 kernel: [ 0.000000] HighMem 229376 -> 393200
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Movable zone start PFN for each node
May 5 11:25:44 megsvr1 kernel: [ 0.000000] early_node_map[1] active PFN ranges
May 5 11:25:44 megsvr1 kernel: [ 0.000000] 0: 0 -> 393200
May 5 11:25:44 megsvr1 kernel: [ 0.000000] On node 0 totalpages: 393200
May 5 11:25:44 megsvr1 kernel: [ 0.000000] DMA zone: 32 pages used for memmap
May 5 11:25:44 megsvr1 kernel: [ 0.000000] DMA zone: 0 pages reserved
May 5 11:25:44 megsvr1 kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Normal zone: 1760 pages used for memmap
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
May 5 11:25:44 megsvr1 kernel: [ 0.000000] HighMem zone: 1280 pages used for memmap
May 5 11:25:44 megsvr1 kernel: [ 0.000000] HighMem zone: 162544 pages, LIFO batch:31
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Movable zone: 0 pages used for memmap
May 5 11:25:44 megsvr1 kernel: [ 0.000000] DMI present.
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: RSDP 000F9BD0, 0024 (r2 ACPIAM)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: XSDT 5FFF0100, 004C (r1 A M I OEMXSDT 12000622 MSFT 97)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: FACP 5FFF0290, 00F4 (r3 A M I OEMFACP 12000622 MSFT 97)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: DSDT 5FFF0490, 4AB3 (r1 S40_3 S40_3A12 A12 INTL 20051117)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: FACS 5FFFE000, 0040
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: APIC 5FFF0390, 0066 (r1 A M I OEMAPIC 12000622 MSFT 97)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: SPCR 5FFF0400, 0050 (r1 A M I OEMSPCR 12000622 MSFT 97)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: OEMB 5FFFE040, 0060 (r1 A M I AMI_OEM 12000622 MSFT 97)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: SSDT 5FFF4F50, 0182 (r1 A M I POWERNOW 1 AMD 1)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
May 5 11:25:44 megsvr1 kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Detected use of extended apic ids on hypertransport bus
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x2008
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
May 5 11:25:44 megsvr1 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: IRQ9 used by override.
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: IRQ14 used by override.
May 5 11:25:44 megsvr1 kernel: [ 0.000000] ACPI: IRQ15 used by override.
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
May 5 11:25:44 megsvr1 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
May 5 11:25:44 megsvr1 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
May 5 11:25:44 megsvr1 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
May 5 11:25:44 megsvr1 kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
May 5 11:25:44 megsvr1 kernel: [ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
May 5 11:25:44 megsvr1 kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390128
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-2-686 root=/dev/md0 ro quiet
May 5 11:25:44 megsvr1 kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Enabling fast FPU save and restore... done.
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Initializing CPU#0
May 5 11:25:44 megsvr1 kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Extended CMOS year: 2000
May 5 11:25:44 megsvr1 kernel: [ 0.000000] Detected 1809.406 MHz processor.
May 5 11:25:44 megsvr1 kernel: [ 0.004000] spurious 8259A interrupt: IRQ7.
May 5 11:25:44 megsvr1 kernel: [ 0.004000] Console: colour VGA+ 80x25
May 5 11:25:44 megsvr1 kernel: [ 0.004000] console [tty0] enabled
May 5 11:25:44 megsvr1 kernel: [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
May 5 11:25:44 megsvr1 kernel: [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
May 5 11:25:44 megsvr1 kernel: [ 0.004000] Memory: 1547972k/1572800k available (1772k kernel code, 23480k reserved, 749k data, 244k init, 655296k highmem)
May 5 11:25:44 megsvr1 kernel: [ 0.004000] virtual kernel memory layout:
May 5 11:25:44 megsvr1 kernel: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
May 5 11:25:44 megsvr1 kernel: [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
May 5 11:25:44 megsvr1 kernel: [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
May 5 11:25:44 megsvr1 kernel: [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
May 5 11:25:44 megsvr1 kernel: [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
May 5 11:25:44 megsvr1 kernel: [ 0.004000] .data : 0xc02bb06d - 0xc0376620 ( 749 kB)
May 5 11:25:44 megsvr1 kernel: [ 0.004000] .text : 0xc0100000 - 0xc02bb06d (1772 kB)
May 5 11:25:44 megsvr1 kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
May 5 11:25:44 megsvr1 kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
May 5 11:25:44 megsvr1 kernel: [ 0.084013] Calibrating delay using timer specific routine.. 3621.91 BogoMIPS (lpj=7243826)
May 5 11:25:44 megsvr1 kernel: [ 0.084052] Security Framework initialized
May 5 11:25:44 megsvr1 kernel: [ 0.084059] SELinux: Disabled at boot.
May 5 11:25:44 megsvr1 kernel: [ 0.084063] Capability LSM initialized
May 5 11:25:44 megsvr1 kernel: [ 0.084079] Mount-cache hash table entries: 512
May 5 11:25:44 megsvr1 kernel: [ 0.084239] Initializing cgroup subsys ns
May 5 11:25:44 megsvr1 kernel: [ 0.084243] Initializing cgroup subsys cpuacct
May 5 11:25:44 megsvr1 kernel: [ 0.084246] Initializing cgroup subsys devices
May 5 11:25:44 megsvr1 kernel: [ 0.084266] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
May 5 11:25:44 megsvr1 kernel: [ 0.084269] CPU: L2 Cache: 1024K (64 bytes/line)
May 5 11:25:44 megsvr1 kernel: [ 0.084272] CPU 0(2) -> Core 0
May 5 11:25:44 megsvr1 kernel: [ 0.084276] Intel machine check architecture supported.
May 5 11:25:44 megsvr1 kernel: [ 0.084279] Intel machine check reporting enabled on CPU#0.
May 5 11:25:44 megsvr1 kernel: [ 0.084292] Checking 'hlt' instruction... OK.
May 5 11:25:44 megsvr1 kernel: [ 0.101199] ACPI: Core revision 20080321
May 5 11:25:44 megsvr1 kernel: [ 0.108653] ENABLING IO-APIC IRQs
May 5 11:25:44 megsvr1 kernel: [ 0.108885] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
May 5 11:25:44 megsvr1 kernel: [ 0.152629] CPU0: AMD Dual-Core AMD Opteron(tm) Processor 1210 stepping 03
May 5 11:25:44 megsvr1 kernel: [ 0.156009] Booting processor 1/1 ip 6000
May 5 11:25:44 megsvr1 kernel: [ 0.164010] Initializing CPU#1
May 5 11:25:44 megsvr1 kernel: [ 0.164010] Calibrating delay using timer specific routine.. 3618.79 BogoMIPS (lpj=7237587)
May 5 11:25:44 megsvr1 kernel: [ 0.164010] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
May 5 11:25:44 megsvr1 kernel: [ 0.164010] CPU: L2 Cache: 1024K (64 bytes/line)
May 5 11:25:44 megsvr1 kernel: [ 0.164010] CPU 1(2) -> Core 1
May 5 11:25:44 megsvr1 kernel: [ 0.164010] Intel machine check architecture supported.
May 5 11:25:44 megsvr1 kernel: [ 0.164010] Intel machine check reporting enabled on CPU#1.
May 5 11:25:44 megsvr1 kernel: [ 0.243926] CPU1: AMD Dual-Core AMD Opteron(tm) Processor 1210 stepping 03
May 5 11:25:44 megsvr1 kernel: [ 0.243950] Brought up 2 CPUs
May 5 11:25:44 megsvr1 kernel: [ 0.243953] Total of 2 processors activated (7240.70 BogoMIPS).
May 5 11:25:44 megsvr1 kernel: [ 0.243989] CPU0 attaching sched-domain:
May 5 11:25:44 megsvr1 kernel: [ 0.243992] domain 0: span 0-1
May 5 11:25:44 megsvr1 kernel: [ 0.243994] groups: 0 1
May 5 11:25:44 megsvr1 kernel: [ 0.243999] CPU1 attaching sched-domain:
May 5 11:25:44 megsvr1 kernel: [ 0.244001] domain 0: span 0-1
May 5 11:25:44 megsvr1 kernel: [ 0.244003] groups: 1 0
May 5 11:25:44 megsvr1 kernel: [ 0.244015] net_namespace: 660 bytes
May 5 11:25:44 megsvr1 kernel: [ 0.244015] Booting paravirtualized kernel on bare hardware
May 5 11:25:44 megsvr1 kernel: [ 0.244015] NET: Registered protocol family 16
May 5 11:25:44 megsvr1 kernel: [ 0.244015] ACPI: bus type pci registered
May 5 11:25:44 megsvr1 kernel: [ 0.244015] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9
May 5 11:25:44 megsvr1 kernel: [ 0.244015] PCI: Using configuration type 1 for base access
May 5 11:25:44 megsvr1 kernel: [ 0.244015] Setting up standard PCI resources
May 5 11:25:44 megsvr1 kernel: [ 0.252015] ACPI: EC: Look up EC in DSDT
May 5 11:25:44 megsvr1 kernel: [ 0.264046] ACPI: Interpreter enabled
May 5 11:25:44 megsvr1 kernel: [ 0.264050] ACPI: (supports S0 S1 S4 S5)
May 5 11:25:44 megsvr1 kernel: [ 0.264064] ACPI: Using IOAPIC for interrupt routing
May 5 11:25:44 megsvr1 kernel: [ 0.273819] ACPI: PCI Root Bridge [PCI0] (0000:00)
May 5 11:25:44 megsvr1 kernel: [ 0.274566] PCI: Transparent bridge - 0000:00:06.0
May 5 11:25:44 megsvr1 kernel: [ 0.275231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
May 5 11:25:44 megsvr1 kernel: [ 0.275603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
May 5 11:25:44 megsvr1 kernel: [ 0.275689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
May 5 11:25:44 megsvr1 kernel: [ 0.275797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
May 5 11:25:44 megsvr1 kernel: [ 0.275905] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
May 5 11:25:44 megsvr1 kernel: [ 0.276013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12.BR1E._PRT]
May 5 11:25:44 megsvr1 kernel: [ 0.276123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
May 5 11:25:44 megsvr1 kernel: [ 0.276231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
May 5 11:25:44 megsvr1 kernel: [ 0.276340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
May 5 11:25:44 megsvr1 kernel: [ 0.285965] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.285965] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
May 5 11:25:44 megsvr1 kernel: [ 0.285965] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.285965] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.286191] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
May 5 11:25:44 megsvr1 kernel: [ 0.286414] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.287548] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
May 5 11:25:44 megsvr1 kernel: [ 0.287771] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
May 5 11:25:44 megsvr1 kernel: [ 0.287996] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
May 5 11:25:44 megsvr1 kernel: [ 0.288219] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *15
May 5 11:25:44 megsvr1 kernel: [ 0.288444] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
May 5 11:25:44 megsvr1 kernel: [ 0.288667] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
May 5 11:25:44 megsvr1 kernel: [ 0.288890] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.289114] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
May 5 11:25:44 megsvr1 kernel: [ 0.289337] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15
May 5 11:25:44 megsvr1 kernel: [ 0.289560] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
May 5 11:25:44 megsvr1 kernel: [ 0.289783] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.290007] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.290231] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.290850] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 0F, should be 0C [20080321]
May 5 11:25:44 megsvr1 kernel: [ 0.290862] Linux Plug and Play Support v0.97 (c) Adam Belay
May 5 11:25:44 megsvr1 kernel: [ 0.290876] pnp: PnP ACPI init
May 5 11:25:44 megsvr1 kernel: [ 0.290876] ACPI: bus type pnp registered
May 5 11:25:44 megsvr1 kernel: [ 0.296111] pnp: PnP ACPI: found 14 devices
May 5 11:25:44 megsvr1 kernel: [ 0.296114] ACPI: ACPI bus type pnp unregistered
May 5 11:25:44 megsvr1 kernel: [ 0.296117] PnPBIOS: Disabled by ACPI PNP
May 5 11:25:44 megsvr1 kernel: [ 0.298578] PCI: Using ACPI for IRQ routing
May 5 11:25:44 megsvr1 kernel: [ 0.306236] ACPI: RTC can wake from S4
May 5 11:25:44 megsvr1 kernel: [ 0.310195] system 00:07: ioport range 0xca0-0xcbf has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310199] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310202] system 00:07: ioport range 0x800-0x80f has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310206] system 00:07: ioport range 0x2000-0x207f has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310209] system 00:07: ioport range 0x2080-0x20ff has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310212] system 00:07: ioport range 0x2400-0x247f has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310216] system 00:07: ioport range 0x2480-0x24ff has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310219] system 00:07: ioport range 0x2800-0x287f has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310222] system 00:07: ioport range 0x2880-0x28ff has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310226] system 00:07: ioport range 0x2f00-0x2f7f has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310229] system 00:07: ioport range 0x2f80-0x2fff has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310233] system 00:07: iomem range 0xfcf80000-0xfcfbffff has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310237] system 00:07: iomem range 0xfee01000-0xfeefffff could not be reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310245] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310249] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310257] system 00:0b: ioport range 0xa00-0xa0f has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310260] system 00:0b: ioport range 0xa10-0xa1f has been reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310269] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310277] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310281] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310284] system 00:0d: iomem range 0x100000-0x5fffffff could not be reserved
May 5 11:25:44 megsvr1 kernel: [ 0.310288] system 00:0d: iomem range 0xff780000-0xffffffff could not be reserved
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Bridge: 0000:00:06.0
May 5 11:25:44 megsvr1 kernel: [ 0.341182] IO window: c000-cfff
May 5 11:25:44 megsvr1 kernel: [ 0.341182] MEM window: 0xfd000000-0xfdafffff
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PREFETCH window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Bridge: 0000:02:00.0
May 5 11:25:44 megsvr1 kernel: [ 0.341182] IO window: d000-efff
May 5 11:25:44 megsvr1 kernel: [ 0.341182] MEM window: 0xfdc00000-0xfdefffff
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PREFETCH window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Bridge: 0000:00:0a.0
May 5 11:25:44 megsvr1 kernel: [ 0.341182] IO window: d000-efff
May 5 11:25:44 megsvr1 kernel: [ 0.341182] MEM window: 0xfdb00000-0xfdefffff
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PREFETCH window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Bridge: 0000:00:0b.0
May 5 11:25:44 megsvr1 kernel: [ 0.341182] IO window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] MEM window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PREFETCH window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Bridge: 0000:00:0c.0
May 5 11:25:44 megsvr1 kernel: [ 0.341182] IO window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] MEM window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PREFETCH window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Bridge: 0000:06:00.0
May 5 11:25:44 megsvr1 kernel: [ 0.341182] IO window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] MEM window: 0xfdf00000-0xfdffffff
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PREFETCH window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Bridge: 0000:00:0d.0
May 5 11:25:44 megsvr1 kernel: [ 0.341182] IO window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] MEM window: 0xfdf00000-0xfdffffff
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PREFETCH window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Bridge: 0000:00:0e.0
May 5 11:25:44 megsvr1 kernel: [ 0.341182] IO window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] MEM window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PREFETCH window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Bridge: 0000:00:0f.0
May 5 11:25:44 megsvr1 kernel: [ 0.341182] IO window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] MEM window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PREFETCH window: disabled.
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Setting latency timer of device 0000:00:06.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Setting latency timer of device 0000:00:0a.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 0.341182] ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
May 5 11:25:44 megsvr1 kernel: [ 0.341182] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNEC] -> GSI 19 (level, low) -> IRQ 19
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Setting latency timer of device 0000:02:00.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Setting latency timer of device 0000:00:0b.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Setting latency timer of device 0000:00:0c.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Setting latency timer of device 0000:00:0d.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Setting latency timer of device 0000:06:00.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Setting latency timer of device 0000:00:0e.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 0.341182] PCI: Setting latency timer of device 0000:00:0f.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 0.341182] NET: Registered protocol family 2
May 5 11:25:44 megsvr1 kernel: [ 0.341680] Switched to high resolution mode on CPU 0
May 5 11:25:44 megsvr1 kernel: [ 0.345189] Switched to high resolution mode on CPU 1
May 5 11:25:44 megsvr1 kernel: [ 0.353996] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
May 5 11:25:44 megsvr1 kernel: [ 0.354373] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
May 5 11:25:44 megsvr1 kernel: [ 0.357909] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
May 5 11:25:44 megsvr1 kernel: [ 0.358393] TCP: Hash tables configured (established 131072 bind 65536)
May 5 11:25:44 megsvr1 kernel: [ 0.358397] TCP reno registered
May 5 11:25:44 megsvr1 kernel: [ 0.364629] NET: Registered protocol family 1
May 5 11:25:44 megsvr1 kernel: [ 0.364751] checking if image is initramfs... it is
May 5 11:25:44 megsvr1 kernel: [ 0.976827] Freeing initrd memory: 7039k freed
May 5 11:25:44 megsvr1 kernel: [ 0.980827] audit: initializing netlink socket (disabled)
May 5 11:25:44 megsvr1 kernel: [ 0.980827] type=2000 audit(1304609115.968:1): initialized
May 5 11:25:44 megsvr1 kernel: [ 0.980827] highmem bounce pool size: 64 pages
May 5 11:25:44 megsvr1 kernel: [ 0.980827] Total HugeTLB memory allocated, 0
May 5 11:25:44 megsvr1 kernel: [ 0.980827] VFS: Disk quotas dquot_6.5.1
May 5 11:25:44 megsvr1 kernel: [ 0.980827] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May 5 11:25:44 megsvr1 kernel: [ 0.980827] msgmni has been set to 1759
May 5 11:25:44 megsvr1 kernel: [ 0.980827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
May 5 11:25:44 megsvr1 kernel: [ 0.980827] io scheduler noop registered
May 5 11:25:44 megsvr1 kernel: [ 0.980827] io scheduler anticipatory registered
May 5 11:25:44 megsvr1 kernel: [ 0.980827] io scheduler deadline registered
May 5 11:25:44 megsvr1 kernel: [ 0.980827] io scheduler cfq registered (default)
May 5 11:25:44 megsvr1 kernel: [ 0.980827] pci 0000:00:00.0: Enabling HT MSI Mapping
May 5 11:25:44 megsvr1 kernel: [ 1.204407] pci 0000:00:05.0: Enabling HT MSI Mapping
May 5 11:25:44 megsvr1 kernel: [ 1.204422] pci 0000:00:06.0: Enabling HT MSI Mapping
May 5 11:25:44 megsvr1 kernel: [ 1.204439] pci 0000:00:08.0: Enabling HT MSI Mapping
May 5 11:25:44 megsvr1 kernel: [ 1.204457] pci 0000:00:09.0: Enabling HT MSI Mapping
May 5 11:25:44 megsvr1 kernel: [ 1.204473] pci 0000:00:0a.0: Enabling HT MSI Mapping
May 5 11:25:44 megsvr1 kernel: [ 1.204489] pci 0000:00:0b.0: Enabling HT MSI Mapping
May 5 11:25:44 megsvr1 kernel: [ 1.204505] pci 0000:00:0c.0: Enabling HT MSI Mapping
May 5 11:25:44 megsvr1 kernel: [ 1.204521] pci 0000:00:0d.0: Enabling HT MSI Mapping
May 5 11:25:44 megsvr1 kernel: [ 1.204537] pci 0000:00:0e.0: Enabling HT MSI Mapping
May 5 11:25:44 megsvr1 kernel: [ 1.204553] pci 0000:00:0f.0: Enabling HT MSI Mapping
May 5 11:25:44 megsvr1 kernel: [ 1.204564] pci 0000:01:05.0: Boot video device
May 5 11:25:44 megsvr1 kernel: [ 1.204711] PCI: Setting latency timer of device 0000:00:0a.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 1.204732] assign_interrupt_mode Found MSI capability
May 5 11:25:44 megsvr1 kernel: [ 1.204752] Allocate Port Service[0000:00:0a.0cie00]
May 5 11:25:44 megsvr1 kernel: [ 1.204849] PCI: Setting latency timer of device 0000:00:0b.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 1.204870] assign_interrupt_mode Found MSI capability
May 5 11:25:44 megsvr1 kernel: [ 1.204886] Allocate Port Service[0000:00:0b.0cie00]
May 5 11:25:44 megsvr1 kernel: [ 1.204979] PCI: Setting latency timer of device 0000:00:0c.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 1.205000] assign_interrupt_mode Found MSI capability
May 5 11:25:44 megsvr1 kernel: [ 1.205016] Allocate Port Service[0000:00:0c.0cie00]
May 5 11:25:44 megsvr1 kernel: [ 1.205110] PCI: Setting latency timer of device 0000:00:0d.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 1.205132] assign_interrupt_mode Found MSI capability
May 5 11:25:44 megsvr1 kernel: [ 1.205147] Allocate Port Service[0000:00:0d.0cie00]
May 5 11:25:44 megsvr1 kernel: [ 1.205241] PCI: Setting latency timer of device 0000:00:0e.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 1.205262] assign_interrupt_mode Found MSI capability
May 5 11:25:44 megsvr1 kernel: [ 1.205278] Allocate Port Service[0000:00:0e.0cie00]
May 5 11:25:44 megsvr1 kernel: [ 1.205373] PCI: Setting latency timer of device 0000:00:0f.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 1.205394] assign_interrupt_mode Found MSI capability
May 5 11:25:44 megsvr1 kernel: [ 1.205410] Allocate Port Service[0000:00:0f.0cie00]
May 5 11:25:44 megsvr1 kernel: [ 1.205945] isapnp: Scanning for PnP cards...
May 5 11:25:44 megsvr1 kernel: [ 1.558387] isapnp: No Plug & Play device found
May 5 11:25:44 megsvr1 kernel: [ 1.561372] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
May 5 11:25:44 megsvr1 kernel: [ 1.561372] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 5 11:25:44 megsvr1 kernel: [ 1.561372] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
May 5 11:25:44 megsvr1 kernel: [ 1.561372] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 5 11:25:44 megsvr1 kernel: [ 1.565357] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
May 5 11:25:44 megsvr1 kernel: [ 1.565357] brd: module loaded
May 5 11:25:44 megsvr1 kernel: [ 1.565357] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
May 5 11:25:44 megsvr1 kernel: [ 1.566911] serio: i8042 KBD port at 0x60,0x64 irq 1
May 5 11:25:44 megsvr1 kernel: [ 1.566911] serio: i8042 AUX port at 0x60,0x64 irq 12
May 5 11:25:44 megsvr1 kernel: [ 1.566911] mice: PS/2 mouse device common for all mice
May 5 11:25:44 megsvr1 kernel: [ 1.566911] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
May 5 11:25:44 megsvr1 kernel: [ 1.566911] rtc0: alarms up to one year, y3k
May 5 11:25:44 megsvr1 kernel: [ 1.566911] cpuidle: using governor ladder
May 5 11:25:44 megsvr1 kernel: [ 1.566911] cpuidle: using governor menu
May 5 11:25:44 megsvr1 kernel: [ 1.566911] No iBFT detected.
May 5 11:25:44 megsvr1 kernel: [ 1.566911] TCP cubic registered
May 5 11:25:44 megsvr1 kernel: [ 1.566911] NET: Registered protocol family 17
May 5 11:25:44 megsvr1 kernel: [ 1.566911] Using IPI No-Shortcut mode
May 5 11:25:44 megsvr1 kernel: [ 1.566911] registered taskstats version 1
May 5 11:25:44 megsvr1 kernel: [ 1.566911] rtc_cmos 00:02: setting system clock to 2011-05-05 15:25:17 UTC (1304609117)
May 5 11:25:44 megsvr1 kernel: [ 1.566911] Freeing unused kernel memory: 244k freed
May 5 11:25:44 megsvr1 kernel: [ 1.680526] ACPI: ACPI0007:00 is registered as cooling_device0
May 5 11:25:44 megsvr1 kernel: [ 1.680793] ACPI: ACPI0007:01 is registered as cooling_device1
May 5 11:25:44 megsvr1 kernel: [ 1.713036] usbcore: registered new interface driver usbfs
May 5 11:25:44 megsvr1 kernel: [ 1.713036] usbcore: registered new interface driver hub
May 5 11:25:44 megsvr1 kernel: [ 1.713036] usbcore: registered new device driver usb
May 5 11:25:44 megsvr1 kernel: [ 1.717036] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
May 5 11:25:44 megsvr1 kernel: [ 1.717036] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23
May 5 11:25:44 megsvr1 kernel: [ 1.717036] PCI: Setting latency timer of device 0000:00:02.1 to 64
May 5 11:25:44 megsvr1 kernel: [ 1.717036] ehci_hcd 0000:00:02.1: EHCI Host Controller
May 5 11:25:44 megsvr1 kernel: [ 1.717036] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
May 5 11:25:44 megsvr1 kernel: [ 1.717036] ehci_hcd 0000:00:02.1: debug port 1
May 5 11:25:44 megsvr1 kernel: [ 1.717036] PCI: cache line size of 64 is not supported by device 0000:00:02.1
May 5 11:25:44 megsvr1 kernel: [ 1.717036] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfcffac00
May 5 11:25:44 megsvr1 kernel: [ 1.721039] No dock devices found.
May 5 11:25:44 megsvr1 kernel: [ 1.725036] Uniform Multi-Platform E-IDE driver
May 5 11:25:44 megsvr1 kernel: [ 1.725036] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
May 5 11:25:44 megsvr1 kernel: [ 1.725871] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 5 11:25:44 megsvr1 kernel: [ 1.725958] usb usb1: configuration #1 chosen from 1 choice
May 5 11:25:44 megsvr1 kernel: [ 1.725991] hub 1-0:1.0: USB hub found
May 5 11:25:44 megsvr1 kernel: [ 1.726000] hub 1-0:1.0: 8 ports detected
May 5 11:25:44 megsvr1 kernel: [ 1.733035] SCSI subsystem initialized
May 5 11:25:44 megsvr1 kernel: [ 1.734493] Fusion MPT base driver 3.04.06
May 5 11:25:44 megsvr1 kernel: [ 1.734496] Copyright (c) 1999-2007 LSI Corporation
May 5 11:25:44 megsvr1 kernel: [ 1.741493] Fusion MPT SPI Host driver 3.04.06
May 5 11:25:44 megsvr1 kernel: [ 1.758173] libata version 3.00 loaded.
May 5 11:25:44 megsvr1 kernel: [ 1.835195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 5 11:25:44 megsvr1 kernel: [ 1.835200] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 5 11:25:44 megsvr1 kernel: [ 1.835203] usb usb1: Product: EHCI Host Controller
May 5 11:25:44 megsvr1 kernel: [ 1.835206] usb usb1: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
May 5 11:25:44 megsvr1 kernel: [ 1.835208] usb usb1: SerialNumber: 0000:00:02.1
May 5 11:25:44 megsvr1 kernel: [ 1.839048] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
May 5 11:25:44 megsvr1 kernel: [ 1.839048] NFORCE-MCP55: IDE controller (0x10de:0x036e rev 0xa1) at PCI slot 0000:00:04.0
May 5 11:25:44 megsvr1 kernel: [ 1.839048] NFORCE-MCP55: not 100% native mode: will probe irqs later
May 5 11:25:44 megsvr1 kernel: [ 1.839048] NFORCE-MCP55: IDE port disabled
May 5 11:25:44 megsvr1 kernel: [ 1.839048] ide0: BM-DMA at 0xffa0-0xffa7
May 5 11:25:44 megsvr1 kernel: [ 1.839048] Probing IDE interface ide0...
May 5 11:25:44 megsvr1 kernel: [ 2.571128] hda: DV-28E-V, ATAPI CD/DVD-ROM drive
May 5 11:25:44 megsvr1 kernel: [ 3.243089] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
May 5 11:25:44 megsvr1 kernel: [ 3.246382] hda: UDMA/33 mode selected
May 5 11:25:44 megsvr1 kernel: [ 3.246909] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 5 11:25:44 megsvr1 kernel: [ 3.255049] sata_nv 0000:00:05.0: version 3.5
May 5 11:25:44 megsvr1 kernel: [ 3.255049] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
May 5 11:25:44 megsvr1 kernel: [ 3.255049] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 22 (level, low) -> IRQ 22
May 5 11:25:44 megsvr1 kernel: [ 3.255049] sata_nv 0000:00:05.0: Using SWNCQ mode
May 5 11:25:44 megsvr1 kernel: [ 3.255049] PCI: Setting latency timer of device 0000:00:05.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 3.255049] scsi0 : sata_nv
May 5 11:25:44 megsvr1 kernel: [ 3.255049] scsi1 : sata_nv
May 5 11:25:44 megsvr1 kernel: [ 3.255049] ata1: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 22
May 5 11:25:44 megsvr1 kernel: [ 3.255049] ata2: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 22
May 5 11:25:44 megsvr1 kernel: [ 5.036685] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May 5 11:25:44 megsvr1 kernel: [ 5.086503] ata1.00: HPA detected: current 488390625, native 488397168
May 5 11:25:44 megsvr1 kernel: [ 5.086503] ata1.00: ATA-7: SEAGATE ST32500NSSUN250G 0741B57R5M, 3.AZK, max UDMA/133
May 5 11:25:44 megsvr1 kernel: [ 5.086503] ata1.00: 488390625 sectors, multi 16: LBA48 NCQ (depth 31/32)
May 5 11:25:44 megsvr1 kernel: [ 5.152677] ata1.00: configured for UDMA/133
May 5 11:25:44 megsvr1 kernel: [ 6.916250] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May 5 11:25:44 megsvr1 kernel: [ 6.964928] ata2.00: HPA detected: current 488390625, native 488397168
May 5 11:25:44 megsvr1 kernel: [ 6.964928] ata2.00: ATA-7: SEAGATE ST32500NSSUN250G 0741B57R44, 3.AZK, max UDMA/133
May 5 11:25:44 megsvr1 kernel: [ 6.964928] ata2.00: 488390625 sectors, multi 16: LBA48 NCQ (depth 31/32)
May 5 11:25:44 megsvr1 kernel: [ 7.031588] ata2.00: configured for UDMA/133
May 5 11:25:44 megsvr1 kernel: [ 7.031588] scsi 0:0:0:0: Direct-Access ATA SEAGATE ST32500N n/a PQ: 0 ANSI: 5
May 5 11:25:44 megsvr1 kernel: [ 7.031588] scsi 1:0:0:0: Direct-Access ATA SEAGATE ST32500N n/a PQ: 0 ANSI: 5
May 5 11:25:44 megsvr1 kernel: [ 7.031588] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
May 5 11:25:44 megsvr1 kernel: [ 7.031588] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
May 5 11:25:44 megsvr1 kernel: [ 7.031588] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21
May 5 11:25:44 megsvr1 kernel: [ 7.031588] PCI: Setting latency timer of device 0000:00:08.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 7.643443] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 2, addr 00:1b:24:93:2f:8e
May 5 11:25:44 megsvr1 kernel: [ 7.643448] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
May 5 11:25:44 megsvr1 kernel: [ 7.646588] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20
May 5 11:25:44 megsvr1 kernel: [ 7.646588] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 20 (level, low) -> IRQ 20
May 5 11:25:44 megsvr1 kernel: [ 7.646588] PCI: Setting latency timer of device 0000:00:09.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 8.619156] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 3, addr 00:1b:24:93:2f:8f
May 5 11:25:44 megsvr1 kernel: [ 8.619160] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
May 5 11:25:44 megsvr1 kernel: [ 8.622619] ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [LNEC] -> GSI 19 (level, low) -> IRQ 19
May 5 11:25:44 megsvr1 kernel: [ 8.622619] mptbase: ioc0: Initiating bringup
May 5 11:25:44 megsvr1 kernel: [ 9.050614] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
May 5 11:25:44 megsvr1 kernel: [ 9.050614] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
May 5 11:25:44 megsvr1 kernel: [ 9.050614] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23
May 5 11:25:44 megsvr1 kernel: [ 9.050614] PCI: Setting latency timer of device 0000:00:02.0 to 64
May 5 11:25:44 megsvr1 kernel: [ 9.050614] ohci_hcd 0000:00:02.0: OHCI Host Controller
May 5 11:25:44 megsvr1 kernel: [ 9.050614] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
May 5 11:25:44 megsvr1 kernel: [ 9.050614] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfcffb000
May 5 11:25:44 megsvr1 kernel: [ 9.107554] usb usb2: configuration #1 chosen from 1 choice
May 5 11:25:44 megsvr1 kernel: [ 9.107586] hub 2-0:1.0: USB hub found
May 5 11:25:44 megsvr1 kernel: [ 9.107596] hub 2-0:1.0: 8 ports detected
May 5 11:25:44 megsvr1 kernel: [ 9.209585] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 5 11:25:44 megsvr1 kernel: [ 9.209588] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 5 11:25:44 megsvr1 kernel: [ 9.209591] usb usb2: Product: OHCI Host Controller
May 5 11:25:44 megsvr1 kernel: [ 9.209594] usb usb2: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
May 5 11:25:44 megsvr1 kernel: [ 9.209596] usb usb2: SerialNumber: 0000:00:02.0
May 5 11:25:44 megsvr1 kernel: [ 9.497479] ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
May 5 11:25:44 megsvr1 kernel: [ 9.513491] usb 2-1: new low speed USB device using ohci_hcd and address 2
May 5 11:25:44 megsvr1 kernel: [ 9.744202] usb 2-1: configuration #1 chosen from 1 choice
May 5 11:25:44 megsvr1 kernel: [ 9.744202] usb 2-1: New USB device found, idVendor=0b38, idProduct=0003
May 5 11:25:44 megsvr1 kernel: [ 9.744202] usb 2-1: New USB device strings: Mfr=4, Product=20, SerialNumber=68
May 5 11:25:44 megsvr1 kernel: [ 9.744202] usb 2-1: Product: USB MULTIMEDIA KEYBOARD
May 5 11:25:44 megsvr1 kernel: [ 9.744202] usb 2-1: Manufacturer: Virtual
May 5 11:25:44 megsvr1 kernel: [ 9.744202] usb 2-1: SerialNumber: 20050606
May 5 11:25:44 megsvr1 kernel: [ 9.848201] scsi2 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=19
May 5 11:25:44 megsvr1 kernel: [ 10.074029] usb 2-6: new low speed USB device using ohci_hcd and address 3
May 5 11:25:44 megsvr1 kernel: [ 10.277190] usb 2-6: configuration #1 chosen from 1 choice
May 5 11:25:44 megsvr1 kernel: [ 10.277190] usb 2-6: New USB device found, idVendor=051d, idProduct=0002
May 5 11:25:44 megsvr1 kernel: [ 10.277190] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
May 5 11:25:44 megsvr1 kernel: [ 10.277190] usb 2-6: Product: Smart-UPS 3000 FW:655.18.D USB FW:7.3
May 5 11:25:44 megsvr1 kernel: [ 10.277190] usb 2-6: Manufacturer: American Power Conversion
May 5 11:25:44 megsvr1 kernel: [ 10.277190] usb 2-6: SerialNumber: JS0835010903
May 5 11:25:44 megsvr1 kernel: [ 10.613183] usb 2-7: new low speed USB device using ohci_hcd and address 4
May 5 11:25:44 megsvr1 kernel: [ 10.929196] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18
May 5 11:25:44 megsvr1 kernel: [ 10.929196] ACPI: PCI Interrupt 0000:03:08.1[b] -> Link [LNED] -> GSI 18 (level, low) -> IRQ 18
May 5 11:25:44 megsvr1 kernel: [ 10.929196] mptbase: ioc1: Initiating bringup
May 5 11:25:44 megsvr1 kernel: [ 11.145214] usb 2-7: configuration #1 chosen from 1 choice
May 5 11:25:44 megsvr1 kernel: [ 11.148264] usb 2-7: New USB device found, idVendor=03f0, idProduct=0024
May 5 11:25:44 megsvr1 kernel: [ 11.148267] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 5 11:25:44 megsvr1 kernel: [ 11.148270] usb 2-7: Product: HP Basic USB Keyboard
May 5 11:25:44 megsvr1 kernel: [ 11.148272] usb 2-7: Manufacturer: CHICONY
May 5 11:25:44 megsvr1 kernel: [ 11.695466] ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
May 5 11:25:44 megsvr1 kernel: [ 12.126276] scsi3 : ioc1: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=18
May 5 11:25:44 megsvr1 kernel: [ 12.132290] scsi 2:0:0:0: Direct-Access R0.0 PQ: 0 ANSI: 5
May 5 11:25:44 megsvr1 kernel: [ 12.132302] target2:0:0: Beginning Domain Validation
May 5 11:25:44 megsvr1 kernel: [ 12.137442] target2:0:0: Ending Domain Validation
May 5 11:25:44 megsvr1 kernel: [ 12.137501] target2:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
May 5 11:25:44 megsvr1 kernel: [ 13.060711] tg3.c:v3.92.1 (June 9, 2008)
May 5 11:25:44 megsvr1 kernel: [ 13.060711] ACPI: PCI Interrupt 0000:07:04.0[A] -> Link [LNED] -> GSI 18 (level, low) -> IRQ 18
May 5 11:25:44 megsvr1 kernel: [ 13.848707] eth2: Tigon3 [partno(BCM95715) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1b:24:93:2f:8c
May 5 11:25:44 megsvr1 kernel: [ 13.848707] eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
May 5 11:25:44 megsvr1 kernel: [ 13.848707] eth2: dma_rwctrl[76148000] dma_mask[64-bit]
May 5 11:25:44 megsvr1 kernel: [ 13.848707] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 17
May 5 11:25:44 megsvr1 kernel: [ 13.848707] ACPI: PCI Interrupt 0000:07:04.1[b] -> Link [LNEA] -> GSI 17 (level, low) -> IRQ 17
May 5 11:25:44 megsvr1 kernel: [ 13.868347] eth3: Tigon3 [partno(BCM95715) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1b:24:93:2f:8d
May 5 11:25:44 megsvr1 kernel: [ 13.868351] eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
May 5 11:25:44 megsvr1 kernel: [ 13.868354] eth3: dma_rwctrl[76148000] dma_mask[64-bit]
May 5 11:25:44 megsvr1 kernel: [ 13.884136] usbcore: registered new interface driver hiddev
May 5 11:25:44 megsvr1 kernel: [ 13.885778] hda: ATAPI 24X DVD-ROM drive, 198kB Cache
May 5 11:25:44 megsvr1 kernel: [ 13.885786] Uniform CD-ROM driver Revision: 3.20
May 5 11:25:44 megsvr1 kernel: [ 13.892486] input: Virtual USB MULTIMEDIA KEYBOARD as /class/input/input0
May 5 11:25:44 megsvr1 kernel: [ 13.893372] input,hidraw0: USB HID v1.10 Keyboard [Virtual USB MULTIMEDIA KEYBOARD] on usb-0000:00:02.0-1
May 5 11:25:44 megsvr1 kernel: [ 13.900284] input: Virtual USB MULTIMEDIA KEYBOARD as /class/input/input1
May 5 11:25:44 megsvr1 kernel: [ 13.900284] input,hidraw1: USB HID v1.10 Mouse [Virtual USB MULTIMEDIA KEYBOARD] on usb-0000:00:02.0-1
May 5 11:25:44 megsvr1 kernel: [ 13.976923] Driver 'sd' needs updating - please use bus_type methods
May 5 11:25:44 megsvr1 kernel: [ 13.976923] sd 0:0:0:0: [sda] 488390625 512-byte hardware sectors (250056 MB)
May 5 11:25:44 megsvr1 kernel: [ 13.976923] sd 0:0:0:0: [sda] Write Protect is off
May 5 11:25:44 megsvr1 kernel: [ 13.976923] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 5 11:25:44 megsvr1 kernel: [ 13.976923] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 5 11:25:44 megsvr1 kernel: [ 13.976923] sd 0:0:0:0: [sda] 488390625 512-byte hardware sectors (250056 MB)
May 5 11:25:44 megsvr1 kernel: [ 13.976923] sd 0:0:0:0: [sda] Write Protect is off
May 5 11:25:44 megsvr1 kernel: [ 13.976923] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 5 11:25:44 megsvr1 kernel: [ 13.976923] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 5 11:25:44 megsvr1 kernel: [ 13.976923] sda: sda1 sda2
May 5 11:25:44 megsvr1 kernel: [ 13.991173] sd 0:0:0:0: [sda] Attached SCSI disk
May 5 11:25:44 megsvr1 kernel: [ 13.991173] sd 1:0:0:0: [sdb] 488390625 512-byte hardware sectors (250056 MB)
May 5 11:25:44 megsvr1 kernel: [ 13.991187] sd 1:0:0:0: [sdb] Write Protect is off
May 5 11:25:44 megsvr1 kernel: [ 13.991187] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
May 5 11:25:44 megsvr1 kernel: [ 13.991187] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 5 11:25:44 megsvr1 kernel: [ 13.991187] sd 1:0:0:0: [sdb] 488390625 512-byte hardware sectors (250056 MB)
May 5 11:25:44 megsvr1 kernel: [ 13.991187] sd 1:0:0:0: [sdb] Write Protect is off
May 5 11:25:44 megsvr1 kernel: [ 13.991187] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
May 5 11:25:44 megsvr1 kernel: [ 13.991187] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 5 11:25:44 megsvr1 kernel: [ 13.991187] sdb: sdb1 sdb2
May 5 11:25:44 megsvr1 kernel: [ 14.010029] sd 1:0:0:0: [sdb] Attached SCSI disk
May 5 11:25:44 megsvr1 kernel: [ 14.520885] scsi 2:0:5:0: Sequential-Access CERTANCE ULTRIUM 3 1770 PQ: 0 ANSI: 4
May 5 11:25:44 megsvr1 kernel: [ 14.520899] target2:0:5: Beginning Domain Validation
May 5 11:25:44 megsvr1 kernel: [ 14.815887] target2:0:5: Domain Validation skipping write tests
May 5 11:25:44 megsvr1 kernel: [ 14.815887] target2:0:5: Ending Domain Validation
May 5 11:25:44 megsvr1 kernel: [ 14.815887] target2:0:5: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
May 5 11:25:44 megsvr1 kernel: [ 15.316883] hiddev96hidraw2: USB HID v1.10 Device [American Power Conversion Smart-UPS 3000 FW:655.18.D USB FW:7.3] on usb-0000:00:02.0-6
May 5 11:25:44 megsvr1 kernel: [ 15.480878] input: CHICONY HP Basic USB Keyboard as /class/input/input2
May 5 11:25:44 megsvr1 kernel: [ 15.480891] input,hidraw3: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:02.0-7
May 5 11:25:44 megsvr1 kernel: [ 15.480914] usbcore: registered new interface driver usbhid
May 5 11:25:44 megsvr1 kernel: [ 15.480919] usbhid: v2.6:USB HID core driver
May 5 11:25:44 megsvr1 kernel: [ 15.588879] scsi: waiting for bus probes to complete ...
May 5 11:25:44 megsvr1 kernel: [ 17.336235] sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
May 5 11:25:44 megsvr1 kernel: [ 17.336235] sd 2:0:0:0: [sdc] 13651132416 512-byte hardware sectors (6989380 MB)
May 5 11:25:44 megsvr1 kernel: [ 17.337854] sd 2:0:0:0: [sdc] Write Protect is off
May 5 11:25:44 megsvr1 kernel: [ 17.337858] sd 2:0:0:0: [sdc] Mode Sense: bf 00 00 08
May 5 11:25:44 megsvr1 kernel: [ 17.338210] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 5 11:25:44 megsvr1 kernel: [ 17.338506] sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
May 5 11:25:44 megsvr1 kernel: [ 17.341637] sd 2:0:0:0: [sdc] 13651132416 512-byte hardware sectors (6989380 MB)
May 5 11:25:44 megsvr1 kernel: [ 17.341637] sd 2:0:0:0: [sdc] Write Protect is off
May 5 11:25:44 megsvr1 kernel: [ 17.341637] sd 2:0:0:0: [sdc] Mode Sense: bf 00 00 08
May 5 11:25:44 megsvr1 kernel: [ 17.341637] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 5 11:25:44 megsvr1 kernel: [ 17.341637] sdc: sdc1
May 5 11:25:44 megsvr1 kernel: [ 17.341837] sd 2:0:0:0: [sdc] Attached SCSI disk
May 5 11:25:44 megsvr1 kernel: [ 17.355663] st: Version 20080224, fixed bufsize 32768, s/g segs 256
May 5 11:25:44 megsvr1 kernel: [ 17.355683] Driver 'st' needs updating - please use bus_type methods
May 5 11:25:44 megsvr1 kernel: [ 17.355871] st 2:0:5:0: Attached scsi tape st0
May 5 11:25:44 megsvr1 kernel: [ 17.355875] st 2:0:5:0: st0: try direct i/o: yes (alignment 512 B)
May 5 11:25:44 megsvr1 kernel: [ 17.360378] osst :I: Tape driver with OnStream support version 0.99.4
May 5 11:25:44 megsvr1 kernel: [ 17.360378] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
May 5 11:25:44 megsvr1 kernel: [ 17.360378] Driver 'osst' needs updating - please use bus_type methods
May 5 11:25:44 megsvr1 kernel: [ 17.919663] md: raid1 personality registered for level 1
May 5 11:25:44 megsvr1 kernel: [ 17.954955] md: md0 stopped.
May 5 11:25:44 megsvr1 kernel: [ 17.955879] md: bind<sdb1>
May 5 11:25:44 megsvr1 kernel: [ 17.956977] md: bind<sda1>
May 5 11:25:44 megsvr1 kernel: [ 17.960980] raid1: raid set md0 active with 2 out of 2 mirrors
May 5 11:25:44 megsvr1 kernel: [ 17.985213] md: md1 stopped.
May 5 11:25:44 megsvr1 kernel: [ 17.985411] md: bind<sdb2>
May 5 11:25:44 megsvr1 kernel: [ 17.989213] md: bind<sda2>
May 5 11:25:44 megsvr1 kernel: [ 17.989213] raid1: raid set md1 active with 2 out of 2 mirrors
May 5 11:25:44 megsvr1 kernel: [ 18.045212] PM: Starting manual resume from disk
May 5 11:25:44 megsvr1 kernel: [ 18.079967] kjournald starting. Commit interval 5 seconds
May 5 11:25:44 megsvr1 kernel: [ 18.093858] EXT3-fs: mounted filesystem with ordered data mode.
May 5 11:25:44 megsvr1 kernel: [ 19.778206] udev[1120]: starting version 164
May 5 11:25:44 megsvr1 kernel: [ 20.251375] input: Power Button (FF) as /class/input/input3
May 5 11:25:44 megsvr1 kernel: [ 20.370881] ACPI: Power Button (FF) [PWRF]
May 5 11:25:44 megsvr1 kernel: [ 20.370999] input: Power Button (CM) as /class/input/input4
May 5 11:25:44 megsvr1 kernel: [ 20.424088] ACPI: Power Button (CM) [PWRB]
May 5 1
 

Thread Tools




All times are GMT. The time now is 08:37 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org