FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-16-2011, 06:59 PM
Will
 
Default Bug#627019: linux-image-2.6.39-rc7-686-pae: several kernel hangs before geting to login

Package: linux-2.6
Version: 2.6.39~rc7-1~experimental.1
Severity: normal
Tags: experimental

I see several segfaults and hangs during boot per each successfult login.
There are 4 or 5 different messages ( segfault, hang, error, etc) that show up consistently while the kernel is loading.
I've taken many photos but have not been able get them off my SD card yet.
Both of my card readers are initialized, but none of my SD cards are recognized when I plug them in.
My usb stick shows up so (crossing fingers) I'll be able to add fotos showing some of segfaaults, etc soon.
Attaching full dmesg with segfault starting at
[8.755883] BUG: unable to handle kernel NULL pointer dereference at (null)

udevd and modprobe also segfault.
which should show in fotos.

-- Package-specific info:
** Version:
Linux version 2.6.39-rc7-686-pae (Debian 2.6.39~rc7-1~experimental.1) (maks@debian.org) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Thu May 12 11:21:50 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-rc7-686-pae root=UUID=9fba1255-6dc4-444c-93f8-3e8130eddc60 ro

** Tainted: D (128)
* Kernel has oopsed before.

** Kernel log:
[ 9.218914] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.312981] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.324682] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.354580] intel_rng: Firmware space is locked read-only. If you can't or
[ 9.354583] intel_rng: don't want to disable this in firmware setup, and if
[ 9.354585] intel_rng: you are certain that your system has a functional
[ 9.354587] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 9.521119] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB002
[ 9.523449] usbcore: registered new interface driver usblp
[ 9.542053] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.983708] Linux video capture interface: v2.00
[ 10.287418] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.289844] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 10.629223] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[ 10.631810] cx8800 0000:02:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.638475] cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected], frontend(s): 0
[ 10.640867] cx88[0]: TV tuner type -1, Radio tuner type -1
[ 10.651427] cx2388x alsa driver version 0.0.8 loaded
[ 10.724027] intel8x0_measure_ac97_clock: measured 55951 usecs (2696 samples)
[ 10.726519] intel8x0: clocking to 48000
[ 10.779211] IR NEC protocol handler initialized
[ 10.855803] i2c-core: driver [tuner] using legacy suspend method
[ 10.858432] i2c-core: driver [tuner] using legacy resume method
[ 10.868641] IR RC5(x) protocol handler initialized
[ 11.019253] IR RC6 protocol handler initialized
[ 11.086974] IR JVC protocol handler initialized
[ 11.216305] IR Sony protocol handler initialized
[ 11.532828] tda9887 15-0043: creating new instance
[ 11.535171] tda9887 15-0043: tda988[5/6/7] found
[ 11.538233] tuner 15-0043: Tuner 74 found with type(s) Radio TV.
[ 11.543925] tuner 15-0061: Tuner -1 found with type(s) Radio TV.
[ 11.584508] tveeprom 15-0050: Hauppauge model 34132, rev J158, serial# 2843606
[ 11.586792] tveeprom 15-0050: tuner model is Philips FM1236 MK3 (idx 58, type 43)
[ 11.589280] tveeprom 15-0050: TV standards NTSC(M) (eeprom 0x08)
[ 11.591612] tveeprom 15-0050: audio processor is CX880 (idx 30)
[ 11.594007] tveeprom 15-0050: has radio
[ 11.596383] cx88[0]: warning: unknown hauppauge model #34132
[ 11.598686] cx88[0]: hauppauge eeprom: model=34132
[ 11.663931] lirc_dev: IR Remote Control driver registered, major 251
[ 11.668718] IR LIRC bridge handler initialized
[ 11.733497] tuner-simple 15-0061: creating new instance
[ 11.736108] tuner-simple 15-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
[ 11.940036] Registered IR keymap rc-hauppauge
[ 11.942765] input: cx88 IR (Hauppauge WinTV 34xxx as /devices/pci0000:00/0000:00:1e.0/0000:02:02.0/rc/rc0/input5
[ 11.945543] rc0: cx88 IR (Hauppauge WinTV 34xxx as /devices/pci0000:00/0000:00:1e.0/0000:02:02.0/rc/rc0
[ 11.948303] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 11.951873] cx88[0]/0: found at 0000:02:02.0, rev: 5, irq: 17, latency: 32, mmio: 0xfc000000
[ 11.958898] cx88[0]/0: registered device video0 [v4l2]
[ 11.963923] cx88[0]/0: registered device vbi0
[ 11.968880] cx88[0]/0: registered device radio0
[ 11.972171] cx88_audio 0000:02:02.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.977104] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 15.564611] REISERFS (device sdb5): found reiserfs format "3.6" with standard journal
[ 15.567285] REISERFS (device sdb5): using ordered data mode
[ 15.575682] REISERFS (device sdb5): journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 15.581412] REISERFS (device sdb5): checking transaction log (sdb5)
[ 15.600678] REISERFS (device sdb5): replayed 1 transactions in 0 seconds
[ 15.651665] REISERFS (device sdb5): Using r5 hash to sort names
[ 15.696250] XFS (sda8): Mounting Filesystem
[ 16.270069] XFS (sda8): Ending clean mount
[ 17.293469] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.317657] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 17.320131] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.232373] fuse init (API version 7.16)
[ 27.584012] eth0: no IPv6 routers present
[ 34.534314] lp: driver loaded but no devices found
[ 34.577441] ppdev: user-space parallel port driver
[ 34.667178] Bluetooth: Core ver 2.16
[ 34.670713] NET: Registered protocol family 31
[ 34.673019] Bluetooth: HCI device and connection manager initialized
[ 34.675244] Bluetooth: HCI socket layer initialized
[ 34.677368] Bluetooth: L2CAP socket layer initialized
[ 34.679826] Bluetooth: SCO socket layer initialized
[ 34.736294] Bluetooth: RFCOMM TTY layer initialized
[ 34.738493] Bluetooth: RFCOMM socket layer initialized
[ 34.740471] Bluetooth: RFCOMM ver 1.11
[ 34.755938] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.758035] Bluetooth: BNEP filters: protocol multicast
[ 35.981563] Netfilter messages via NETLINK v0.30.
[ 36.603197] device eth0 entered promiscuous mode
[ 41.206701] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 41.996450] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 44.792054] usb 3-2: USB disconnect, device number 2
[ 45.280073] usb 3-2: new low speed USB device number 3 using uhci_hcd
[ 45.470978] usb 3-2: New USB device found, idVendor=045e, idProduct=0040
[ 45.470985] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 45.470989] usb 3-2: Product: Microsoft Wheel Mouse Optical®
[ 45.470993] usb 3-2: Manufacturer: Microsoft
[ 45.489517] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
[ 45.489712] generic-usb 0003:045E:0040.0002: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.1-2/input0
[ 46.104135] usb 3-2: USB disconnect, device number 3
[ 46.380039] usb 3-2: new low speed USB device number 4 using uhci_hcd
[ 46.561795] usb 3-2: New USB device found, idVendor=045e, idProduct=0040
[ 46.561801] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 46.561804] usb 3-2: Product: Microsoft Wheel Mouse Optical®
[ 46.561807] usb 3-2: Manufacturer: Microsoft
[ 46.580174] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7
[ 46.580450] generic-usb 0003:045E:0040.0003: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.1-2/input0
[ 67.911946] gnome-settings-[1730]: segfault at b46f5c30 ip b46f5c30 sp bfb2312c error 4 in libdbus-1.so.3.5.5[b474a000+3c000]
[ 95.659502] gnome-settings-[2035]: segfault at b4718c30 ip b4718c30 sp bf807e8c error 4 in libdbus-1.so.3.5.5[b476d000+3c000]

** Model information
not available

** Loaded modules:
Module Size Used by
ip6table_filter 12492 1
ip6_tables 17069 1 ip6table_filter
iptable_filter 12488 1
ip_tables 16998 1 iptable_filter
ipt_ULOG 12561 1
x_tables 17969 5 ip6table_filter,ip6_tables,iptable_filter,ip_table s,ipt_ULOG
nfnetlink_queue 12801 1
nfnetlink 12786 2 nfnetlink_queue
bnep 17147 2
rfcomm 31961 0
bluetooth 92361 10 bnep,rfcomm
parport_pc 21895 0
ppdev 12621 0
lp 12858 0
parport 27018 3 parport_pc,ppdev,lp
rfkill 18510 2 bluetooth
crc16 12327 1 bluetooth
mperf 12387 0
speedstep_lib 12463 0
cpufreq_userspace 12520 0
cpufreq_stats 12670 0
cpufreq_powersave 12422 0
cpufreq_conservative 12987 0
autofs4 22558 1
binfmt_misc 12778 1
fuse 55666 1
reiserfs 178367 1
rc_hauppauge 12382 0
tuner_simple 16926 1
tuner_types 12305 1 tuner_simple
ir_lirc_codec 12651 0
lirc_dev 12797 1 ir_lirc_codec
tda9887 12573 1
ir_sony_decoder 12403 0
tda8290 17051 0
ir_jvc_decoder 12401 0
ir_rc6_decoder 12401 0
ir_rc5_decoder 12401 0
tuner 17237 2
ir_nec_decoder 12401 0
cx88_alsa 13045 1
cx8800 26721 0
cx88xx 67340 2 cx88_alsa,cx8800
rc_core 17813 9 rc_hauppauge,ir_lirc_codec,ir_sony_decoder,ir_jvc_ decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decod er,cx88xx
tveeprom 16473 1 cx88xx
v4l2_common 13026 3 tuner,cx8800,cx88xx
videobuf_dma_sg 12992 3 cx88_alsa,cx8800,cx88xx
snd_intel8x0 22287 2
snd_ac97_codec 83728 1 snd_intel8x0
ac97_bus 12462 1 snd_ac97_codec
snd_pcm_oss 35864 0
snd_mixer_oss 17649 1 snd_pcm_oss
snd_pcm 52731 4 cx88_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
videodev 57130 4 tuner,cx8800,cx88xx,v4l2_common
videobuf_core 17540 3 cx8800,cx88xx,videobuf_dma_sg
snd_seq_midi 12744 0
btcx_risc 12499 3 cx88_alsa,cx8800,cx88xx
snd_rawmidi 22407 1 snd_seq_midi
snd_seq_midi_event 13124 1 snd_seq_midi
snd_seq 39172 2 snd_seq_midi,snd_seq_midi_event
pcspkr 12515 0
usblp 17083 0
snd_timer 22171 2 snd_pcm,snd_seq
snd_seq_device 12995 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 38189 16 cx88_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss, snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_time r,snd_seq_device
shpchp 26653 0
soundcore 12878 1 snd
i2c_i801 12670 0
snd_page_alloc 12841 2 snd_intel8x0,snd_pcm
pci_hotplug 26303 1 shpchp
tpm_infineon 12675 0
rng_core 12550 0
tpm 17476 1 tpm_infineon
tpm_bios 12799 1 tpm
processor 26983 0
evdev 13084 0
xfs 528900 2
usbhid 35206 0
hid 59841 1 usbhid
usb_storage 34951 0
uas 12975 0
sg 21385 0
sd_mod 35060 5
crc_t10dif 12332 1 sd_mod
sr_mod 17418 0
cdrom 34631 1 sr_mod
ata_generic 12439 0
i915 286502 2
drm_kms_helper 26550 1 i915
uhci_hcd 21850 0
drm 133286 3 i915,drm_kms_helper
i2c_algo_bit 12706 2 cx88xx,i915
ata_piix 21079 3
libata 132100 2 ata_generic,ata_piix
ehci_hcd 34885 0
i2c_core 19022 14 tuner_simple,tda9887,tda8290,tuner,cx8800,cx88xx,t veeprom,v4l2_common,videodev,i2c_i801,i915,drm_kms _helper,drm,i2c_algo_bit
usbcore 103321 7 usblp,usbhid,usb_storage,uas,uhci_hcd,ehci_hcd
floppy 47893 0
scsi_mod 134414 6 usb_storage,uas,sg,sd_mod,sr_mod,libata
e1000 84011 0
video 17345 1 i915
button 12783 1 i915
thermal_sys 17667 2 processor,video

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ec00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:03.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to CSA Bridge [8086:2573] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fa900000-fa9fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]

00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c800 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at cc00 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: faa00000-fe9fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix

00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at d800 [size=16]
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: Intel Corporation Device [8086:5248]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at c400 [size=32]
Kernel driver in use: i801_smbus

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Intel Corporation Device [8086:e00a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 2: Memory at feb7f800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at feb7f400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH

01:01.0 Ethernet controller [0200]: Intel Corporation 82547EI Gigabit Ethernet Controller [8086:1019]
Subsystem: Intel Corporation Device [8086:3046]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa9e0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000

02:02.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Hauppauge computer works Inc. Hauppauge WinTV 34xxx models [0070:3401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800

02:02.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:3401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88_audio


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:b002 Hewlett-Packard PhotoSmart 7200 series
Bus 003 Device 004: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical


-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.39-rc7-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.39-rc7-686-pae depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.39-rc7-686-pae recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-4 Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.39-rc7-686-pae suggests:
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
pn linux-doc-2.6.39 <none> (no description available)

Versions of packages linux-image-2.6.39-rc7-686-pae is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.29 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.39-rc7-686-pae/postinst/missing-firmware-2.6.39-rc7-686-pae:
linux-image-2.6.39-rc7-686-pae/postinst/ignoring-do-bootloader-2.6.39-rc7-686-pae:
linux-image-2.6.39-rc7-686-pae/prerm/removing-running-kernel-2.6.39-rc7-686-pae: true
linux-image-2.6.39-rc7-686-pae/postinst/depmod-error-initrd-2.6.39-rc7-686-pae: false
 

Thread Tools




All times are GMT. The time now is 11:20 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org