Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#626562: linux-image-2.6.39-rc7: s5h1409/mt2131 read/writereg errors with dvb tuner (http://www.linux-archive.org/debian-kernel/525662-bug-626562-linux-image-2-6-39-rc7-s5h1409-mt2131-read-writereg-errors-dvb-tuner.html)

Brian Paterni 05-13-2011 01:19 AM

Bug#626562: linux-image-2.6.39-rc7: s5h1409/mt2131 read/writereg errors with dvb tuner
 
Package: linux-2.6
Version: 2.6.39~rc7-1~experimental.1

Let me say first that I'm not sure when this bug first appearred in the debian
provided linux kernels. Since I just switched back from a custom compiled kernel
not too long ago. (The custom kernel does not experience this bug. though the
relevant v4l modules were always compiled in my custom builds. not sure if that
would make a difference)

The problem is that my "Hauppauge WinTV-HVR1800" dvb tuner is not functioning
properly when a debian distribution kernel is powering it. I can start video
playback, but after a few seconds, video regresses until it is entirely frozen.
After which the following errors appear in my kernel log:

May 12 18:44:16 localhost kernel: [ 59.445889] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:16 localhost kernel: [ 59.456060] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:16 localhost kernel: [ 59.466218] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:16 localhost kernel: [ 59.476378] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:16 localhost kernel: [ 59.486535] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:16 localhost kernel: [ 59.496694] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:16 localhost kernel: [ 59.506852] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:16 localhost kernel: [ 59.517011] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:16 localhost kernel: [ 59.527168] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:16 localhost kernel: [ 59.537328] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:16 localhost kernel: [ 59.547485] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:16 localhost kernel: [ 59.557645] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:17 localhost kernel: [ 59.567802] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:19 localhost kernel: [ 61.960143] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:19 localhost kernel: [ 61.960325] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -5)
May 12 18:44:19 localhost kernel: [ 61.960419] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -5)
May 12 18:44:19 localhost kernel: [ 61.960520] s5h1409_writereg: error (reg == 0xf4, val == 0x0000, ret == -5)
May 12 18:44:19 localhost kernel: [ 61.960616] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -5)
May 12 18:44:19 localhost kernel: [ 61.960711] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -5)
May 12 18:44:19 localhost kernel: [ 61.960798] s5h1409_writereg: error (reg == 0xf3, val == 0x0001, ret == -5)
May 12 18:44:19 localhost kernel: [ 61.960892] mt2131 I2C write failed (len=7)
May 12 18:44:19 localhost kernel: [ 61.960994] s5h1409_writereg: error (reg == 0xf3, val == 0x0000, ret == -5)
May 12 18:44:19 localhost kernel: [ 61.961089] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -5)
May 12 18:44:19 localhost kernel: [ 61.961184] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -5)
May 12 18:44:20 localhost kernel: [ 62.960123] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:20 localhost kernel: [ 62.960224] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -5)
May 12 18:44:20 localhost kernel: [ 62.960312] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -5)
May 12 18:44:20 localhost kernel: [ 62.960419] s5h1409_writereg: error (reg == 0xf4, val == 0x0000, ret == -5)
May 12 18:44:20 localhost kernel: [ 62.960513] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -5)
May 12 18:44:20 localhost kernel: [ 62.960608] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -5)
May 12 18:44:20 localhost kernel: [ 62.960701] s5h1409_writereg: error (reg == 0xf3, val == 0x0001, ret == -5)
May 12 18:44:20 localhost kernel: [ 62.960795] mt2131 I2C write failed (len=7)
May 12 18:44:20 localhost kernel: [ 62.960890] s5h1409_writereg: error (reg == 0xf3, val == 0x0000, ret == -5)
May 12 18:44:20 localhost kernel: [ 62.960983] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -5)
May 12 18:44:20 localhost kernel: [ 62.961077] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -5)
May 12 18:44:21 localhost kernel: [ 63.960122] s5h1409_readreg: readreg error (ret == -5)
May 12 18:44:21 localhost kernel: [ 63.960223] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -5)
May 12 18:44:21 localhost kernel: [ 63.960311] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -5)
May 12 18:44:21 localhost kernel: [ 63.960418] s5h1409_writereg: error (reg == 0xf4, val == 0x0000, ret == -5)
May 12 18:44:21 localhost kernel: [ 63.960511] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -5)
May 12 18:44:21 localhost kernel: [ 63.960606] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -5)
May 12 18:44:21 localhost kernel: [ 63.960700] s5h1409_writereg: error (reg == 0xf3, val == 0x0001, ret == -5)
May 12 18:44:21 localhost kernel: [ 63.960794] mt2131 I2C write failed (len=7)
May 12 18:44:21 localhost kernel: [ 63.960889] s5h1409_writereg: error (reg == 0xf3, val == 0x0000, ret == -5)
May 12 18:44:21 localhost kernel: [ 63.960982] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -5)
May 12 18:44:21 localhost kernel: [ 63.961076] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -5)

I don't believe this is a hardware problem since I am able to boot into a custom
built kernel and the dvb tuner will work as normal.

I'll attach a full dmesg, but other than that, I'm not sure what else there is.
Let me know if I can provide any additional information.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-2-amd64 (Debian 2.6.38-5) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 13:51:57 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=4f6d38d8-8e1c-4a9e-a932-c5014ec2f75f ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N32-SLI DELUXE, BIOS ASUS M2N32-SLI DELUXE ACPI BIOS Revision 1201 06/20/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f5e30] f5e30
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fee0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fee0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fee0000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 36b44000 - 3759a000
[ 0.000000] ACPI: RSDP 00000000000f7bc0 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 000000007fee3100 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000007feec880 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000007fee3280 0959D (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007fee0000 00040
[ 0.000000] ACPI: SSDT 000000007feeca80 0030E (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: MCFG 000000007feece80 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 000000007feec9c0 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fee0000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007fee0000
[ 0.000000] NODE_DATA [000000007fedb000 - 000000007fedffff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523887
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7109 pages used for memmap
[ 0.000000] DMA32 zone: 512795 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82752 r8192 d23744 u1048576
[ 0.000000] pcpu-alloc: s82752 r8192 d23744 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516716
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=4f6d38d8-8e1c-4a9e-a932-c5014ec2f75f ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 1a000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Memory: 2047504k/2096000k available (3260k kernel code, 452k absent, 48044k reserved, 3425k data, 676k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3013.596 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008026] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.19 BogoMIPS (lpj=12054384)
[ 0.008073] pid_max: default: 32768 minimum: 301
[ 0.008115] Security Framework initialized
[ 0.008141] SELinux: Disabled at boot.
[ 0.008327] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012750] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.013308] Mount-cache hash table entries: 256
[ 0.013452] Initializing cgroup subsys ns
[ 0.013476] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.013501] Initializing cgroup subsys cpuacct
[ 0.013526] Initializing cgroup subsys devices
[ 0.013550] Initializing cgroup subsys freezer
[ 0.013573] Initializing cgroup subsys net_cls
[ 0.013596] Initializing cgroup subsys blkio
[ 0.013647] tseg: 007ff00000
[ 0.013649] CPU: Physical Processor ID: 0
[ 0.013672] CPU: Processor Core ID: 0
[ 0.013695] mce: CPU supports 5 MCE banks
[ 0.013724] using C1E aware idle routine
[ 0.014333] ACPI: Core revision 20110112
[ 0.019409] Setting APIC routing to flat
[ 0.019900] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.059623] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.144098] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144137] Brought up 2 CPUs
[ 0.144161] Total of 2 processors activated (12054.99 BogoMIPS).
[ 0.144549] devtmpfs: initialized
[ 0.149414] print_constraints: dummy:
[ 0.149414] NET: Registered protocol family 16
[ 0.149414] node 0 link 0: io port [9000, ffff]
[ 0.149414] TOM: 0000000080000000 aka 2048M
[ 0.149414] node 0 link 0: mmio [a0000, bffff]
[ 0.149414] node 0 link 0: mmio [80000000, efffffff]
[ 0.149414] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.149414] node 0 link 0: mmio [f0000000, f04fffff]
[ 0.149414] bus: [00, 04] on node 0 link 0
[ 0.149414] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.149414] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.149414] bus: 00 index 2 [mem 0x80000000-0xf3ffffff]
[ 0.149414] bus: 00 index 3 [mem 0xf4000000-0xfcffffffff]
[ 0.149414] ACPI: bus type pci registered
[ 0.149414] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.149414] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.153710] PCI: Using configuration type 1 for base access
[ 0.154043] bio: create slab <bio-0> at 0
[ 0.154043] ACPI: EC: Look up EC in DSDT
[ 0.160270] ACPI: Interpreter enabled
[ 0.160298] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.160432] ACPI: Using IOAPIC for interrupt routing
[ 0.166038] ACPI: No dock devices found.
[ 0.166061] HEST: Table not found.
[ 0.166085] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.166554] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[ 0.167442] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.167444] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
[ 0.167446] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c7f] (ignored)
[ 0.167448] pci_root PNP0A08:00: host bridge window [io 0x9000-0xffff] (ignored)
[ 0.167450] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
[ 0.167452] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.167455] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xefffffff] (ignored)
[ 0.167457] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
[ 0.167459] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
[ 0.167468] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500
[ 0.167501] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.167521] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.167550] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.167579] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.167608] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.167631] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.167652] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.167685] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.167700] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167703] pci 0000:00:04.0: PME# disabled
[ 0.167731] pci 0000:00:08.0: [10de:0369] type 0 class 0x000500
[ 0.167881] pci 0000:00:09.0: [10de:0360] type 0 class 0x000601
[ 0.167906] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.167942] pci 0000:00:09.1: [10de:0368] type 0 class 0x000c05
[ 0.167969] pci 0000:00:09.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.167975] pci 0000:00:09.1: reg 24: [io 0x1c40-0x1c7f]
[ 0.167996] pci 0000:00:09.1: PME# supported from D3hot D3cold
[ 0.168017] pci 0000:00:09.1: PME# disabled
[ 0.168028] pci 0000:00:09.2: [10de:036a] type 0 class 0x000500
[ 0.168073] pci 0000:00:0a.0: [10de:036c] type 0 class 0x000c03
[ 0.168081] pci 0000:00:0a.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.168108] pci 0000:00:0a.0: supports D1 D2
[ 0.168110] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168113] pci 0000:00:0a.0: PME# disabled
[ 0.168124] pci 0000:00:0a.1: [10de:036d] type 0 class 0x000c03
[ 0.168132] pci 0000:00:0a.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.168159] pci 0000:00:0a.1: supports D1 D2
[ 0.168160] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168163] pci 0000:00:0a.1: PME# disabled
[ 0.168179] pci 0000:00:0c.0: [10de:036e] type 0 class 0x000101
[ 0.168196] pci 0000:00:0c.0: reg 20: [io 0xf400-0xf40f]
[ 0.168218] pci 0000:00:0d.0: [10de:037f] type 0 class 0x000101
[ 0.168226] pci 0000:00:0d.0: reg 10: [io 0x09f0-0x09f7]
[ 0.168231] pci 0000:00:0d.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.168235] pci 0000:00:0d.0: reg 18: [io 0x0970-0x0977]
[ 0.168239] pci 0000:00:0d.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.168244] pci 0000:00:0d.0: reg 20: [io 0xe000-0xe00f]
[ 0.168248] pci 0000:00:0d.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[ 0.168274] pci 0000:00:0d.1: [10de:037f] type 0 class 0x000101
[ 0.168282] pci 0000:00:0d.1: reg 10: [io 0x09e0-0x09e7]
[ 0.168287] pci 0000:00:0d.1: reg 14: [io 0x0be0-0x0be3]
[ 0.168291] pci 0000:00:0d.1: reg 18: [io 0x0960-0x0967]
[ 0.168296] pci 0000:00:0d.1: reg 1c: [io 0x0b60-0x0b63]
[ 0.168301] pci 0000:00:0d.1: reg 20: [io 0xcc00-0xcc0f]
[ 0.168306] pci 0000:00:0d.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.168330] pci 0000:00:0d.2: [10de:037f] type 0 class 0x000101
[ 0.168339] pci 0000:00:0d.2: reg 10: [io 0xc800-0xc807]
[ 0.168343] pci 0000:00:0d.2: reg 14: [io 0xc400-0xc403]
[ 0.168348] pci 0000:00:0d.2: reg 18: [io 0xc000-0xc007]
[ 0.168352] pci 0000:00:0d.2: reg 1c: [io 0xbc00-0xbc03]
[ 0.168356] pci 0000:00:0d.2: reg 20: [io 0xb800-0xb80f]
[ 0.168361] pci 0000:00:0d.2: reg 24: [mem 0xfe02b000-0xfe02bfff]
[ 0.168388] pci 0000:00:0e.0: [10de:0370] type 1 class 0x000604
[ 0.168417] pci 0000:00:0e.1: [10de:0371] type 0 class 0x000403
[ 0.168427] pci 0000:00:0e.1: reg 10: [mem 0xfe020000-0xfe023fff]
[ 0.168457] pci 0000:00:0e.1: PME# supported from D3hot D3cold
[ 0.168460] pci 0000:00:0e.1: PME# disabled
[ 0.168481] pci 0000:00:10.0: [10de:0373] type 0 class 0x000680
[ 0.168493] pci 0000:00:10.0: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.168497] pci 0000:00:10.0: reg 14: [io 0xb400-0xb407]
[ 0.168502] pci 0000:00:10.0: reg 18: [mem 0xfe029000-0xfe0290ff]
[ 0.168506] pci 0000:00:10.0: reg 1c: [mem 0xfe028000-0xfe02800f]
[ 0.168530] pci 0000:00:10.0: supports D1 D2
[ 0.168532] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168536] pci 0000:00:10.0: PME# disabled
[ 0.168552] pci 0000:00:11.0: [10de:0373] type 0 class 0x000680
[ 0.168564] pci 0000:00:11.0: reg 10: [mem 0xfe027000-0xfe027fff]
[ 0.168568] pci 0000:00:11.0: reg 14: [io 0xb000-0xb007]
[ 0.168573] pci 0000:00:11.0: reg 18: [mem 0xfe026000-0xfe0260ff]
[ 0.168578] pci 0000:00:11.0: reg 1c: [mem 0xfe025000-0xfe02500f]
[ 0.168601] pci 0000:00:11.0: supports D1 D2
[ 0.168603] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168607] pci 0000:00:11.0: PME# disabled
[ 0.168624] pci 0000:00:14.0: [10de:0374] type 1 class 0x000604
[ 0.168646] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168648] pci 0000:00:14.0: PME# disabled
[ 0.168663] pci 0000:00:16.0: [10de:0375] type 1 class 0x000604
[ 0.168684] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168687] pci 0000:00:16.0: PME# disabled
[ 0.168699] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.168712] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.168723] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.168735] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.168752] PCI: peer root bus 00 res updated from pci conf
[ 0.168777] pci 0000:01:00.0: [1002:9442] type 0 class 0x000300
[ 0.168786] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.168794] pci 0000:01:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit]
[ 0.168799] pci 0000:01:00.0: reg 20: [io 0xac00-0xacff]
[ 0.168808] pci 0000:01:00.0: reg 30: [mem 0xfdec0000-0xfdedffff pref]
[ 0.168820] pci 0000:01:00.0: supports D1 D2
[ 0.168834] pci 0000:01:00.1: [1002:aa30] type 0 class 0x000403
[ 0.168843] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
[ 0.168871] pci 0000:01:00.1: supports D1 D2
[ 0.176021] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.176045] pci 0000:00:04.0: bridge window [io 0xa000-0xafff]
[ 0.176048] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.176051] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.176079] pci 0000:02:0b.0: [104c:8023] type 0 class 0x000c00
[ 0.176091] pci 0000:02:0b.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.176098] pci 0000:02:0b.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
[ 0.176134] pci 0000:02:0b.0: supports D1 D2
[ 0.176136] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.176139] pci 0000:02:0b.0: PME# disabled
[ 0.176158] pci 0000:00:0e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.176183] pci 0000:00:0e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.176185] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.176188] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.176190] pci 0000:00:0e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.176193] pci 0000:00:0e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.176195] pci 0000:00:0e.0: bridge window [mem 0x80000000-0xf3ffffff] (subtractive decode)
[ 0.176197] pci 0000:00:0e.0: bridge window [mem 0xf4000000-0xfcffffffff] (subtractive decode)
[ 0.176230] pci 0000:03:00.0: [14f1:8880] type 0 class 0x000400
[ 0.176251] pci 0000:03:00.0: reg 10: [mem 0xfda00000-0xfdbfffff 64bit]
[ 0.176326] pci 0000:03:00.0: supports D1 D2
[ 0.176328] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.176332] pci 0000:03:00.0: PME# disabled
[ 0.176350] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.176381] pci 0000:00:14.0: PCI bridge to [bus 03-03]
[ 0.176405] pci 0000:00:14.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.176408] pci 0000:00:14.0: bridge window [mem 0xfda00000-0xfdbfffff]
[ 0.176411] pci 0000:00:14.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.176452] pci 0000:04:00.0: [1095:3132] type 0 class 0x000180
[ 0.176474] pci 0000:04:00.0: reg 10: [mem 0xfddff000-0xfddff07f 64bit]
[ 0.176491] pci 0000:04:00.0: reg 18: [mem 0xfddf8000-0xfddfbfff 64bit]
[ 0.176503] pci 0000:04:00.0: reg 20: [io 0x9c00-0x9c7f]
[ 0.176524] pci 0000:04:00.0: reg 30: [mem 0xfdd00000-0xfdd7ffff pref]
[ 0.176557] pci 0000:04:00.0: supports D1 D2
[ 0.176574] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.176605] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[ 0.176630] pci 0000:00:16.0: bridge window [io 0x9000-0x9fff]
[ 0.176632] pci 0000:00:16.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.176636] pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.176644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.176844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.176967] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.205435] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
[ 0.205667] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.205942] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.206212] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.206483] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
[ 0.206713] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
[ 0.206943] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[ 0.207173] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.207443] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.207714] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
[ 0.207944] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 0.208184] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)
[ 0.208414] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 0.208643] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.208916] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[ 0.209147] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[ 0.209377] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.209648] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 0.209879] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 0.210109] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[ 0.210366] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.210524] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.210700] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.210878] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.211055] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[ 0.211213] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.211371] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.211529] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.211706] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.212072] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.212288] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[ 0.212504] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.212740] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.212956] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.213172] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.213388] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.213624] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.213861] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.216065] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.216285] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.216538] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.216565] vgaarb: loaded
[ 0.216623] PCI: Using ACPI for IRQ routing
[ 0.216648] PCI: pci_cache_line_size set to 64 bytes
[ 0.216714] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.216716] reserve RAM buffer: 000000007fee0000 - 000000007fffffff
[ 0.217942] pnp: PnP ACPI init
[ 0.217982] ACPI: bus type pnp registered
[ 0.218483] pnp 00:00: [bus 00-04]
[ 0.218485] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.218487] pnp 00:00: [io 0x0000-0x03af window]
[ 0.218489] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 0.218491] pnp 00:00: [io 0x1c00-0x1c7f window]
[ 0.218492] pnp 00:00: [io 0x9000-0xffff window]
[ 0.218494] pnp 00:00: [io 0x03b0-0x03df window]
[ 0.218496] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.218498] pnp 00:00: [mem 0x80000000-0xefffffff window]
[ 0.218500] pnp 00:00: [mem 0xf4000000-0xfe02ffff window]
[ 0.218502] pnp 00:00: [mem 0xfec80000-0xfecbffff window]
[ 0.218579] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.218594] pnp 00:01: [io 0x1000-0x107f]
[ 0.218596] pnp 00:01: [io 0x1080-0x10ff]
[ 0.218598] pnp 00:01: [io 0x1400-0x147f]
[ 0.218599] pnp 00:01: [io 0x1480-0x14ff]
[ 0.218601] pnp 00:01: [io 0x1800-0x187f]
[ 0.218602] pnp 00:01: [io 0x1880-0x18ff]
[ 0.218664] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.218689] system 00:01: [io 0x1080-0x10ff] has been reserved
[ 0.218712] system 00:01: [io 0x1400-0x147f] has been reserved
[ 0.218736] system 00:01: [io 0x1480-0x14ff] has been reserved
[ 0.218760] system 00:01: [io 0x1800-0x187f] has been reserved
[ 0.218783] system 00:01: [io 0x1880-0x18ff] has been reserved
[ 0.218807] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.218875] pnp 00:02: [io 0x0010-0x001f]
[ 0.218877] pnp 00:02: [io 0x0022-0x003f]
[ 0.218879] pnp 00:02: [io 0x0044-0x005f]
[ 0.218880] pnp 00:02: [io 0x0062-0x0063]
[ 0.218882] pnp 00:02: [io 0x0065-0x006f]
[ 0.218884] pnp 00:02: [io 0x0074-0x007f]
[ 0.218885] pnp 00:02: [io 0x0091-0x0093]
[ 0.218890] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.218891] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.218893] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.218895] pnp 00:02: [io 0x0800-0x087f]
[ 0.218896] pnp 00:02: [io 0x0290-0x0297]
[ 0.218958] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.218983] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.219006] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.219030] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.219040] pnp 00:03: [dma 4]
[ 0.219042] pnp 00:03: [io 0x0000-0x000f]
[ 0.219044] pnp 00:03: [io 0x0080-0x0090]
[ 0.219045] pnp 00:03: [io 0x0094-0x009f]
[ 0.219047] pnp 00:03: [io 0x00c0-0x00df]
[ 0.219079] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.219118] pnp 00:04: [io 0x0070-0x0073]
[ 0.219131] pnp 00:04: [irq 8]
[ 0.219161] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.219167] pnp 00:05: [io 0x0061]
[ 0.219199] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.219206] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.219214] pnp 00:06: [irq 13]
[ 0.219243] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.219485] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.219492] pnp 00:07: [irq 4]
[ 0.219548] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.219813] pnp 00:08: [io 0x0378-0x037f]
[ 0.219821] pnp 00:08: [irq 7]
[ 0.219865] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.220459] pnp 00:09: [mem 0xf0000000-0xf3ffffff]
[ 0.220521] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.220545] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220643] pnp 00:0a: [mem 0x000d1800-0x000d3fff]
[ 0.220645] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[ 0.220647] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[ 0.220648] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[ 0.220650] pnp 00:0a: [mem 0xfefff000-0xfefff0ff]
[ 0.220652] pnp 00:0a: [mem 0x7fee0000-0x7fefffff]
[ 0.220654] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[ 0.220656] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.220659] pnp 00:0a: [mem 0x00100000-0x7fedffff]
[ 0.220661] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.220663] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.220665] pnp 00:0a: [mem 0xfefff000-0xfeffffff]
[ 0.220666] pnp 00:0a: [mem 0xfff80000-0xfff80fff]
[ 0.220668] pnp 00:0a: [mem 0xfff90000-0xfffbffff]
[ 0.220670] pnp 00:0a: [mem 0xfffed000-0xfffeffff]
[ 0.220743] system 00:0a: [mem 0x000d1800-0x000d3fff] has been reserved
[ 0.220768] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.220792] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.220816] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.220840] system 00:0a: [mem 0xfefff000-0xfefff0ff] has been reserved
[ 0.220864] system 00:0a: [mem 0x7fee0000-0x7fefffff] could not be reserved
[ 0.220888] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.220912] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.220936] system 00:0a: [mem 0x00100000-0x7fedffff] could not be reserved
[ 0.220960] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.220984] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.221008] system 00:0a: [mem 0xfefff000-0xfeffffff] could not be reserved
[ 0.221032] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.221056] system 00:0a: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.221080] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.221104] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.221112] pnp: PnP ACPI: found 11 devices
[ 0.221135] ACPI: ACPI bus type pnp unregistered
[ 0.227341] Switching to clocksource acpi_pm
[ 0.227419] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.227443] pci 0000:00:04.0: bridge window [io 0xa000-0xafff]
[ 0.227467] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.227492] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.227518] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.227541] pci 0000:00:0e.0: bridge window [io disabled]
[ 0.227565] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.227589] pci 0000:00:0e.0: bridge window [mem pref disabled]
[ 0.227614] pci 0000:00:14.0: PCI bridge to [bus 03-03]
[ 0.227637] pci 0000:00:14.0: bridge window [io disabled]
[ 0.227661] pci 0000:00:14.0: bridge window [mem 0xfda00000-0xfdbfffff]
[ 0.227685] pci 0000:00:14.0: bridge window [mem pref disabled]
[ 0.227710] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[ 0.227734] pci 0000:00:16.0: bridge window [io 0x9000-0x9fff]
[ 0.227758] pci 0000:00:16.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.227782] pci 0000:00:16.0: bridge window [mem pref disabled]
[ 0.227812] pci 0000:00:04.0: setting latency timer to 64
[ 0.227816] pci 0000:00:0e.0: setting latency timer to 64
[ 0.227820] pci 0000:00:14.0: setting latency timer to 64
[ 0.227824] pci 0000:00:16.0: setting latency timer to 64
[ 0.227827] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.227829] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.227831] pci_bus 0000:00: resource 6 [mem 0x80000000-0xf3ffffff]
[ 0.227833] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff]
[ 0.227835] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.227837] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.227839] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.227842] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.227844] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.227846] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.227848] pci_bus 0000:02: resource 6 [mem 0x80000000-0xf3ffffff]
[ 0.227850] pci_bus 0000:02: resource 7 [mem 0xf4000000-0xfcffffffff]
[ 0.227852] pci_bus 0000:03: resource 1 [mem 0xfda00000-0xfdbfffff]
[ 0.227854] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff]
[ 0.227856] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.227882] NET: Registered protocol family 2
[ 0.227990] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.227366] Switched to NOHz mode on CPU #0
[ 0.227990] Switched to NOHz mode on CPU #1
[ 0.227990] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.227990] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.227990] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.227990] TCP reno registered
[ 0.227990] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.227990] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.227990] NET: Registered protocol family 1
[ 0.227990] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.244074] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.244135] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.244196] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.244257] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.244321] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.244392] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.244469] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.244549] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.244634] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.244666] pci 0000:01:00.0: Boot video device
[ 0.244677] PCI: CLS 32 bytes, default 64
[ 0.244727] Unpacking initramfs...
[ 0.453647] Freeing initrd memory: 10584k freed
[ 0.460514] audit: initializing netlink socket (disabled)
[ 0.460548] type=2000 audit(1305246048.460:1): initialized
[ 0.467602] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.469504] VFS: Disk quotas dquot_6.5.2
[ 0.469581] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.469677] msgmni has been set to 4019
[ 0.469920] alg: No test for stdrng (krng)
[ 0.469989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.470016] io scheduler noop registered
[ 0.470038] io scheduler deadline registered
[ 0.470088] io scheduler cfq registered (default)
[ 0.470241] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.470261] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.470341] pcieport 0000:00:14.0: setting latency timer to 64
[ 0.470360] pcieport 0000:00:14.0: irq 41 for MSI/MSI-X
[ 0.470434] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.470453] pcieport 0000:00:16.0: irq 42 for MSI/MSI-X
[ 0.470610] ERST: Table is not found!
[ 0.470685] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.491066] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.552489] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.556192] Linux agpgart interface v0.103
[ 0.556305] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.556714] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.556741] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.556861] mousedev: PS/2 mouse device common for all mice
[ 0.556925] rtc_cmos 00:04: RTC can wake from S4
[ 0.560095] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.560149] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.560183] cpuidle: using governor ladder
[ 0.560206] cpuidle: using governor menu
[ 0.560423] TCP cubic registered
[ 0.560551] NET: Registered protocol family 10
[ 0.561060] Mobile IPv6
[ 0.561083] NET: Registered protocol family 17
[ 0.561108] Registering the dns_resolver key type
[ 0.561217] PM: Hibernation image not present or could not be loaded.
[ 0.561228] registered taskstats version 1
[ 0.561642] rtc_cmos 00:04: setting system clock to 2011-05-13 00:20:49 UTC (1305246049)
[ 0.561688] Initalizing network drop monitor service
[ 0.562864] Freeing unused kernel memory: 676k freed
[ 0.563162] Write protecting the kernel read-only data: 6144k
[ 0.566265] Freeing unused kernel memory: 816k freed
[ 0.569523] Freeing unused kernel memory: 776k freed
[ 0.589220] <30>udevd[91]: starting version 168
[ 0.681285] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.681509] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 0.681551] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 0.681579] forcedeth 0000:00:10.0: setting latency timer to 64
[ 0.686762] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.686790] ACPI: Thermal Zone [THRM] (40 C)
[ 0.709828] SCSI subsystem initialized
[ 0.764670] ACPI: Fan [FAN] (on)
[ 0.766358] usbcore: registered new interface driver usbfs
[ 0.766585] libata version 3.00 loaded.
[ 0.767021] usbcore: registered new interface driver hub
[ 0.767139] usbcore: registered new device driver usb
[ 0.770203] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.778895] sata_sil24 0000:04:00.0: version 1.1
[ 0.779061] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.779098] sata_sil24 0000:04:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.779175] sata_sil24 0000:04:00.0: setting latency timer to 64
[ 0.779549] scsi0 : sata_sil24
[ 0.779667] scsi1 : sata_sil24
[ 0.779735] ata1: SATA max UDMA/100 host m128@0xfddff000 port 0xfddf8000 irq 16
[ 0.779762] ata2: SATA max UDMA/100 host m128@0xfddff000 port 0xfddfa000 irq 16
[ 1.201114] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:60:3d:2f:92
[ 1.201143] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.201390] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 22
[ 1.201426] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 22 (level, low) -> IRQ 22
[ 1.201454] forcedeth 0000:00:11.0: setting latency timer to 64
[ 1.724659] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1d:60:3d:34:30
[ 1.724686] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.724756] pata_amd 0000:00:0c.0: version 0.4.1
[ 1.724784] pata_amd 0000:00:0c.0: setting latency timer to 64
[ 1.725124] scsi2 : pata_amd
[ 1.725219] scsi3 : pata_amd
[ 1.725580] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 1.725604] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 1.725796] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 1.725830] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 1.725876] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[ 1.725878] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 1.725920] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[ 1.736048] ehci_hcd 0000:00:0a.1: debug port 1
[ 1.736076] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported
[ 1.736093] ehci_hcd 0000:00:0a.1: irq 21, io mem 0xfe02e000
[ 1.748027] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 1.748066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.748093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.748118] usb usb1: Product: EHCI Host Controller
[ 1.748141] usb usb1: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[ 1.750278] usb usb1: SerialNumber: 0000:00:0a.1
[ 1.750412] hub 1-0:1.0: USB hub found
[ 1.750439] hub 1-0:1.0: 10 ports detected
[ 1.750566] sata_nv 0000:00:0d.0: version 3.5
[ 1.750686] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 1.750718] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[ 1.750744] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 1.751157] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 1.751502] scsi4 : sata_nv
[ 1.751610] scsi5 : sata_nv
[ 1.751748] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 20
[ 1.751773] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 20
[ 1.751982] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 1.752039] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 1.752065] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 1.752466] sata_nv 0000:00:0d.1: setting latency timer to 64
[ 1.752798] scsi6 : sata_nv
[ 1.752896] scsi7 : sata_nv
[ 1.753033] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 23
[ 1.753057] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 23
[ 1.753305] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 22
[ 1.753331] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 22 (level, low) -> IRQ 22
[ 1.753357] sata_nv 0000:00:0d.2: Using SWNCQ mode
[ 1.753759] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 1.754117] scsi8 : sata_nv
[ 1.754228] scsi9 : sata_nv
[ 1.754362] ata9: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 22
[ 1.754387] ata10: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 22
[ 1.774590] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.774843] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 1.774870] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
[ 1.774910] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 1.774912] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 1.774945] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[ 1.788036] ohci_hcd 0000:00:0a.0: irq 21, io mem 0xfe02f000
[ 1.846023] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.846048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.846073] usb usb2: Product: OHCI Host Controller
[ 1.846096] usb usb2: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 1.846119] usb usb2: SerialNumber: 0000:00:0a.0
[ 1.846242] hub 2-0:1.0: USB hub found
[ 1.846270] hub 2-0:1.0: 10 ports detected
[ 2.216029] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.220025] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.220118] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.224742] ata5.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 2.224766] ata5.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.228358] ata9.00: ATAPI: ATAPI iHAS120 6, 7L04, max UDMA/100
[ 2.240731] ata5.00: configured for UDMA/133
[ 2.244152] ata9.00: configured for UDMA/100
[ 2.276274] ata7.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 2.276299] ata7.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.284021] usb 1-9: new high speed USB device using ehci_hcd and address 5
[ 2.292270] ata7.00: configured for UDMA/133
[ 2.422512] usb 1-9: New USB device found, idVendor=0bda, idProduct=8187
[ 2.422536] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.422560] usb 1-9: Product: RTL8187_Wireless
[ 2.422582] usb 1-9: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 2.422606] usb 1-9: SerialNumber: 0015AF28D3AD
[ 2.724018] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 2.856031] ata1: SATA link down (SStatus 0 SControl 0)
[ 2.936040] usb 2-1: New USB device found, idVendor=04e8, idProduct=6640
[ 2.936064] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.936087] usb 2-1: Product: SAMSUNG CDMA Technologies
[ 2.936110] usb 2-1: Manufacturer: SAMSUNG Electronics Bo.,Ltd.
[ 3.264018] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 3.478039] usb 2-2: New USB device found, idVendor=046d, idProduct=c051
[ 3.478063] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.478087] usb 2-2: Product: USB-PS/2 Optical Mouse
[ 3.478110] usb 2-2: Manufacturer: Logitech
[ 3.784018] usb 2-4: new low speed USB device using ohci_hcd and address 4
[ 4.001040] usb 2-4: New USB device found, idVendor=047b, idProduct=0011
[ 4.001064] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.001088] usb 2-4: Product: Standard USB Keyboard
[ 4.001111] usb 2-4: Manufacturer: Silitek
[ 4.936030] ata2: SATA link down (SStatus 0 SControl 0)
[ 4.936130] ata4: port disabled. ignoring.
[ 4.936276] scsi 4:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 5.404027] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.412676] ata6.00: ATA-8: WDC WD1001FALS-00E8B0, 05.00K05, max UDMA/133
[ 5.412700] ata6.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 5.428670] ata6.00: configured for UDMA/133
[ 5.428780] scsi 5:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 5.428995] scsi 6:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 5.740023] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.741108] scsi 8:0:0:0: CD-ROM ATAPI iHAS120 6 7L04 PQ: 0 ANSI: 5
[ 6.052021] ata10: SATA link down (SStatus 0 SControl 300)
[ 6.065997] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.066058] sd 4:0:0:0: [sda] Write Protect is off
[ 6.066082] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.066097] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.066476] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.066531] sd 5:0:0:0: [sdb] Write Protect is off
[ 6.066555] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.066568] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.066894] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.066948] sd 6:0:0:0: [sdc] Write Protect is off
[ 6.066971] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.066985] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.078634] sdb: sdb1
[ 6.078963] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 6.081449] sdc: sdc1
[ 6.081686] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 6.094261] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.0/input/input0
[ 6.094356] generic-usb 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-2/input0
[ 6.104197] sda: sda1 sda2
[ 6.104497] sd 4:0:0:0: [sda] Attached SCSI disk
[ 6.110106] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.110139] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.110256] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 6.114370] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 6.114456] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 6.114796] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.114854] sr 8:0:0:0: Attached scsi generic sg3 type 5
[ 6.116145] input: Silitek Standard USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-4/2-4:1.0/input/input1
[ 6.116234] generic-usb 0003:047B:0011.0002: input,hidraw1: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:0a.0-4/input0
[ 6.116280] usbcore: registered new interface driver usbhid
[ 6.116303] usbhid: USB HID core driver
[ 7.478212] PM: Starting manual resume from disk
[ 7.478240] PM: Hibernation image partition 8:2 present
[ 7.478241] PM: Looking for hibernation image.
[ 7.478425] PM: Image not found (code -22)
[ 7.478426] PM: Hibernation image not present or could not be loaded.
[ 7.481211] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 7.481215] PM: Basic memory bitmaps created
[ 7.488593] PM: Basic memory bitmaps freed
[ 7.647262] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.850875] <30>udevd[523]: starting version 168
[ 9.238247] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 9.238280] ACPI: Power Button [PWRB]
[ 9.238387] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 9.238413] ACPI: Power Button [PWRF]
[ 9.308345] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.310912] ACPI: acpi_idle registered with cpuidle
[ 9.358596] ACPI: resource nForce2_smbus [io 0x1c00-0x1c3f] conflicts with ACPI region SM00 [io 0x1c00-0x1c05]
[ 9.358628] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.358696] i2c i2c-0: nForce2 SMBus adapter at 0x1c40
[ 9.408123] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 9.431096] usbcore: registered new interface driver usbserial
[ 9.431132] USB Serial support registered for generic
[ 9.431289] usbcore: registered new interface driver usbserial_generic
[ 9.431311] usbserial: USB Serial Driver core
[ 9.448759] cdc_acm 2-1:1.0: ttyACM0: USB ACM device
[ 9.452930] USB Serial support registered for qcaux
[ 9.453152] usbcore: registered new interface driver cdc_acm
[ 9.453176] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 9.453205] qcaux 2-1:1.2: qcaux converter detected
[ 9.453480] usb 2-1: qcaux converter now attached to ttyUSB0
[ 9.453555] usbcore: registered new interface driver qcaux
[ 9.547034] MCE: In-kernel MCE decoding enabled.
[ 9.616735] EDAC MC: Ver: 2.1.0 May 8 2011
[ 9.662298] EDAC amd64_edac: v3.3.0
[ 9.662441] EDAC amd64: DRAM ECC disabled.
[ 9.662474] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 9.662475] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 9.662476] (Note that use of the override may cause unknown side effects.)
[ 9.681807] Linux video capture interface: v2.00
[ 9.997575] cx23885 driver version 0.0.2 loaded
[ 9.997881] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 9.997911] cx23885 0000:03:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 9.998091] CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge WinTV-HVR1800 [card=2,autodetected]
[ 10.380386] IR NEC protocol handler initialized
[ 10.382400] tveeprom 1-0050: Hauppauge model 78521, rev C1E9, serial# 4850397
[ 10.382425] tveeprom 1-0050: MAC address is 00:0d:fe:4a:02:dd
[ 10.382449] tveeprom 1-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
[ 10.382475] tveeprom 1-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[ 10.382500] tveeprom 1-0050: audio processor is CX23887 (idx 42)
[ 10.382523] tveeprom 1-0050: decoder processor is CX23887 (idx 37)
[ 10.382547] tveeprom 1-0050: has radio
[ 10.382569] cx23885[0]: hauppauge eeprom: model=78521
[ 10.402195] cx25840 3-0044: cx23887 A/V decoder found @ 0x88 (cx23885[0])
[ 10.420846] IR RC5(x) protocol handler initialized
[ 10.463476] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 10.463505] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 10.463532] hda_intel: msi for device 1043:81f6 set to 0
[ 10.463576] HDA Intel 0000:00:0e.1: setting latency timer to 64
[ 10.476595] IR RC6 protocol handler initialized
[ 10.498360] IR JVC protocol handler initialized
[ 10.537083] IR Sony protocol handler initialized
[ 10.546648] lirc_dev: IR Remote Control driver registered, major 251
[ 10.562996] IR LIRC bridge handler initialized
[ 11.093068] cx25840 3-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[ 11.109815] i2c-core: driver [tuner] using legacy suspend method
[ 11.109842] i2c-core: driver [tuner] using legacy resume method
[ 11.130247] tuner 2-0042: chip found @ 0x84 (cx23885[0])
[ 11.168900] tda829x 2-0042: could not clearly identify tuner address, defaulting to 60
[ 11.213619] tda18271 2-0060: creating new instance
[ 11.248349] TDA18271HD/C1 detected @ 2-0060
[ 11.333350] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.1/input/input5
[ 11.398289] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 11.398321] HDA Intel 0000:01:00.1: PCI INT B -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[ 11.398396] HDA Intel 0000:01:00.1: irq 43 for MSI/MSI-X
[ 11.398419] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 12.416352] tda829x 2-0042: type set to tda8295+18271
[ 13.520425] cx23885[0]/0: registered device video0 [v4l2]
[ 14.600314] cx23885[0]: registered device video1 [mpeg]
[ 14.600340] cx23885_dvb_register() allocating 1 frontend(s)
[ 14.600365] cx23885[0]: cx23885 based dvb card
[ 14.671040] MT2131: successfully identified at address 0x61
[ 14.672653] DVB: registering new adapter (cx23885[0])
[ 14.672678] DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
[ 14.672996] cx23885_dev_checkrevision() Hardware revision = 0xb1
[ 14.673026] cx23885[0]/0: found at 0000:03:00.0, rev: 15, irq: 16, latency: 0, mmio: 0xfda00000
[ 14.673056] cx23885 0000:03:00.0: setting latency timer to 64
[ 14.673119] cx23885 0000:03:00.0: irq 44 for MSI/MSI-X
[ 16.748213] Adding 67111532k swap on /dev/sda2. Priority:-1 extents:1 across:67111532k
[ 16.752230] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 16.988029] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 17.145882] [drm] Initialized drm 1.1.0 20060810
[ 17.222005] [drm] radeon kernel modesetting enabled.
[ 17.222474] radeon 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 17.222506] radeon 0000:01:00.0: setting latency timer to 64
[ 17.225361] [drm] initializing kernel modesetting (RV770 0x1002:0x9442).
[ 17.225411] [drm] register mmio base: 0xFDEE0000
[ 17.225434] [drm] register mmio size: 65536
[ 17.227449] ATOM BIOS: Wekiva
[ 17.227496] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 17.227522] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 17.227816] [drm] Detected VRAM RAM=512M, BAR=256M
[ 17.227843] [drm] RAM width 256bits DDR
[ 17.227941] [TTM] Zone kernel: Available graphics memory: 1030178 kiB.
[ 17.227965] [TTM] Initializing pool allocator.
[ 17.228066] [drm] radeon: 512M of VRAM memory ready
[ 17.228090] [drm] radeon: 512M of GTT memory ready.
[ 17.228134] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.228157] [drm] Driver supports precise vblank timestamp query.
[ 17.228210] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 17.228215] radeon 0000:01:00.0: radeon: using MSI.
[ 17.228261] [drm] radeon: irq initialized.
[ 17.228285] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 17.229255] [drm] Loading RV770 Microcode
[ 17.326350] radeon 0000:01:00.0: WB enabled
[ 17.372406] [drm] ring test succeeded in 1 usecs
[ 17.372531] [drm] radeon: ib pool ready.
[ 17.372621] [drm] ib test succeeded in 0 usecs
[ 17.372648] [drm] Enabling audio support
[ 17.372675] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 17.372685] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 17.373191] [drm] Radeon Display Connectors
[ 17.373215] [drm] Connector 0:
[ 17.373237] [drm] DVI-I
[ 17.373259] [drm] HPD1
[ 17.373283] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 17.373310] [drm] Encoders:
[ 17.373332] [drm] DFP1: INTERNAL_UNIPHY
[ 17.373356] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 17.373380] [drm] Connector 1:
[ 17.373402] [drm] DIN
[ 17.373425] [drm] Encoders:
[ 17.373449] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 17.373472] [drm] Connector 2:
[ 17.373494] [drm] DVI-I
[ 17.373516] [drm] HPD2
[ 17.373538] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 17.373563] [drm] Encoders:
[ 17.373585] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 17.373608] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 17.477529] [drm] radeon: power management initialized
[ 17.624069] [drm] fb mappable at 0xE0142000
[ 17.624092] [drm] vram apper at 0xE0000000
[ 17.624114] [drm] size 5324800
[ 17.624136] [drm] fb depth is 24
[ 17.624158] [drm] pitch is 5888
[ 17.624237] fbcon: radeondrmfb (fb0) is primary device
[ 18.048194] Console: switching to colour frame buffer device 180x56
[ 18.052325] fb0: radeondrmfb frame buffer device
[ 18.052326] drm: registered panic notifier
[ 18.052382] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0
[ 18.081964] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00)
[ 18.082064] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x8
[ 18.082108] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0xa
[ 18.082138] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xc
[ 18.082168] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xe
[ 18.082198] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0x10
[ 18.082229] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10
[ 18.082259] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10
[ 18.082289] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12
[ 19.357182] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.518986] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.665262] fuse init (API version 7.16)
[ 20.954201] forcedeth 0000:00:11.0: irq 46 for MSI/MSI-X
[ 20.954427] forcedeth 0000:00:11.0: eth1: no link during initialization
[ 20.958861] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 24.917660] lp: driver loaded but no devices found
[ 34.059772] forcedeth 0000:00:10.0: irq 47 for MSI/MSI-X
[ 36.291843] forcedeth 0000:00:10.0: irq 47 for MSI/MSI-X
[ 36.417240] forcedeth 0000:00:10.0: irq 47 for MSI/MSI-X
[ 46.453896] s5h1409_readreg: readreg error (ret == -5)
[ 46.464072] s5h1409_readreg: readreg error (ret == -5)
[ 46.474229] s5h1409_readreg: readreg error (ret == -5)
[ 46.484389] s5h1409_readreg: readreg error (ret == -5)
[ 46.494546] s5h1409_readreg: readreg error (ret == -5)
[ 46.504706] s5h1409_readreg: readreg error (ret == -5)
[ 46.514863] s5h1409_readreg: readreg error (ret == -5)
[ 46.525022] s5h1409_readreg: readreg error (ret == -5)
[ 46.535179] s5h1409_readreg: readreg error (ret == -5)
[ 46.545339] s5h1409_readreg: readreg error (ret == -5)
[ 46.555496] s5h1409_readreg: readreg error (ret == -5)
[ 46.565655] s5h1409_readreg: readreg error (ret == -5)
[ 46.575812] s5h1409_readreg: readreg error (ret == -5)
[ 46.585971] s5h1409_readreg: readreg error (ret == -5)
[ 46.596130] s5h1409_readreg: readreg error (ret == -5)
[ 46.606288] s5h1409_readreg: readreg error (ret == -5)
[ 46.616447] s5h1409_readreg: readreg error (ret == -5)
[ 46.626604] s5h1409_readreg: readreg error (ret == -5)
[ 46.636763] s5h1409_readreg: readreg error (ret == -5)
[ 46.646921] s5h1409_readreg: readreg error (ret == -5)
[ 47.136022] eth0: no IPv6 routers present
[ 89.876133] s5h1409_readreg: readreg error (ret == -5)
[ 89.876233] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -5)
[ 89.876420] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -5)
[ 89.876521] s5h1409_writereg: error (reg == 0xf4, val == 0x0000, ret == -5)
[ 89.876708] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -5)
[ 89.876804] s5h1

Brian Paterni 05-13-2011 01:36 AM

Bug#626562: linux-image-2.6.39-rc7: s5h1409/mt2131 read/writereg errors with dvb tuner
 
found 626562 2.6.38-5

Also, I did install linux 2.6.38-2-amd64 from unstable. This bug is also present
in that earlier release.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110513013645.GA3910@robocomp.net">http://lists.debian.org/20110513013645.GA3910@robocomp.net


All times are GMT. The time now is 06:48 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.