FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-11-2011, 09:55 PM
Sabahattin Gucukoglu
 
Default Bug#626427: linux-image-2.6.38-2-686: Horrible Time Skew, Eventual Near-zero Responsiveness

Package: linux-2.6
Version: 2.6.38-5
Severity: important

(reportbug script died, hope you've got everything.)

The machine runs with *HORRIBLE* clock drift (see text). Eventually, the
system will slow right down, so that new processes or threads will not
start. It *seems* to be related to the use of BRLTTY. See this thread:
http://www.mail-archive.com/brltty@mielke.cc/msg05352.html

And, yes, it's annoying having to hard-reboot the box every so often. It
would seem that after some period of time, touching my display or the
physical console triggers the lockup. I don't think this is a coincidence,
even though on the surface there are two different problems. The kernel
upgrade was sufficient to begin these issues.

Cheers,
Sabahattin

-- Package-specific info:
** Version:
Linux version 2.6.38-2-686 (Debian 2.6.38-5) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 14:49:45 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=3b61a0a8-b642-4e7c-b846-e1e9e16019cb ro bootkbd=uk quiet

** Not tainted

** Kernel log:
[ 6.176964] PCI: setting IRQ 10 as level-triggered
[ 6.176995] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 6.177042] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 6.177175] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 6.177274] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
[ 6.177490] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.177512] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.177531] usb usb1: Product: UHCI Host Controller
[ 6.177547] usb usb1: Manufacturer: Linux 2.6.38-2-686 uhci_hcd
[ 6.177563] usb usb1: SerialNumber: 0000:00:07.2
[ 6.178971] hub 1-0:1.0: USB hub found
[ 6.179013] hub 1-0:1.0: 2 ports detected
[ 6.197469] SCSI subsystem initialized
[ 6.459277] libata version 3.00 loaded.
[ 6.489362] pata_via 0000:00:07.1: version 0.3.4
[ 6.494117] scsi0 : pata_via
[ 6.495346] scsi1 : pata_via
[ 6.496281] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 6.496304] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 6.606996] firewire_core: created device fw0: GUID 00110600000069b8, S400
[ 6.660614] ata1.00: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133
[ 6.660636] ata1.00: 398297088 sectors, multi 16: LBA48
[ 6.676520] ata1.00: configured for UDMA/66
[ 6.677192] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y200P0 YAR4 PQ: 0 ANSI: 5
[ 6.848386] ata2.00: ATAPI: IOMEGA ZIP 100 ATAPI, 23.D, max PIO2, CDB intr
[ 6.848426] ata2.01: ATAPI: COMPAQ DVD-ROM GD-2500, 0011, max MWDMA2
[ 6.864359] ata2.00: configured for PIO2
[ 6.912302] ata2.01: configured for MWDMA2
[ 6.928529] scsi 1:0:0:0: Direct-Access IOMEGA ZIP 100 23.D PQ: 0 ANSI: 5
[ 6.948929] scsi 1:0:1:0: CD-ROM COMPAQ DVD-ROM GD-2500 0011 PQ: 0 ANSI: 5
[ 7.190975] sd 0:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
[ 7.191599] sd 0:0:0:0: [sda] Write Protect is off
[ 7.191623] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.191889] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.204308] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 7.238294] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
[ 7.238317] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.239260] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 7.277548] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 7.277627] ata1.00: BMDMA stat 0x25
[ 7.277690] ata1.00: failed command: READ DMA
[ 7.277777] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 7.277787] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 7.277905] ata1.00: status: { DRDY ERR }
[ 7.277964] ata1.00: error: { ICRC ABRT }
[ 7.278117] ata1: soft resetting link
[ 7.448524] ata1.00: configured for UDMA/66
[ 7.448586] ata1: EH complete
[ 7.527765] ata1.00: limiting speed to UDMA/44:PIO4
[ 7.527790] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 7.527864] ata1.00: BMDMA stat 0x25
[ 7.527927] ata1.00: failed command: READ DMA
[ 7.528014] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 7.528024] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 7.528196] ata1.00: status: { DRDY ERR }
[ 7.528258] ata1.00: error: { ICRC ABRT }
[ 7.528409] ata1: soft resetting link
[ 7.708508] ata1.00: configured for UDMA/44
[ 7.708553] ata1: EH complete
[ 7.750848] sda: sda1 sda2 < sda5 >
[ 7.753069] sda: detected capacity change from 0 to 203928109056
[ 7.755288] sda: detected capacity change from 0 to 203928109056
[ 7.756290] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.863627] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.869158] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.870202] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 8.257493] PM: Starting manual resume from disk
[ 8.257517] PM: Hibernation image partition 8:5 present
[ 8.257529] PM: Looking for hibernation image.
[ 8.258247] PM: Image not found (code -22)
[ 8.258262] PM: Hibernation image not present or could not be loaded.
[ 8.457862] EXT3-fs (sda1): recovery required on readonly filesystem
[ 8.457887] EXT3-fs (sda1): write access will be enabled during recovery
[ 8.465638] EXT3-fs: barriers not enabled
[ 8.703768] kjournald starting. Commit interval 5 seconds
[ 8.704536] EXT3-fs (sda1): recovery complete
[ 8.705806] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 10.674601] <30>udevd[206]: starting version 168
[ 11.627939] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 11.627990] ACPI: Power Button [PWRB]
[ 11.628583] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 11.628613] ACPI: Power Button [PWRF]
[ 11.868358] ACPI: acpi_idle registered with cpuidle
[ 11.868564] Marking TSC unstable due to TSC halts in idle
[ 11.895119] Switching to clocksource acpi_pm
[ 11.962045] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.226005] parport_pc 00:0a: reported by Plug and Play ACPI
[ 12.226162] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 12.244012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.595667] ACPI: resource vt596_smbus [io 0x5000-0x5007] conflicts with ACPI region SM06 [io 0x5006-0x5006]
[ 12.595690] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.424147] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 15.014073] Adding 746984k swap on /dev/sda5. Priority:-1 extents:1 across:746984k
[ 15.416470] EXT3-fs (sda1): using internal journal
[ 15.908342] loop: module loaded
[ 17.546459] fuse init (API version 7.16)
[ 17.800373] r8169 0000:00:12.0: eth0: link down
[ 17.800628] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.153905] r8169 0000:00:12.0: eth0: link up
[ 20.154109] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

** Model information
not available

** Loaded modules:
Module Size Used by
fuse 55640 1
loop 17805 0
firewire_sbp2 17511 0
i2c_viapro 12451 0
psmouse 45863 0
i2c_core 18989 1 i2c_viapro
evdev 13084 3
shpchp 26653 0
parport_pc 21895 0
serio_raw 12758 0
pci_hotplug 26303 1 shpchp
processor 26983 1
parport 27018 1 parport_pc
button 12866 0
ext3 98001 1
jbd 40818 1 ext3
mbcache 12810 1 ext3
sg 21385 0
sr_mod 17418 0
sd_mod 34941 3
cdrom 34631 1 sr_mod
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
pata_via 12733 2
libata 131904 2 ata_generic,pata_via
uhci_hcd 21850 0
ehci_hcd 34889 0
usbcore 99058 3 uhci_hcd,ehci_hcd
firewire_ohci 26296 0
scsi_mod 134369 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
r8169 36366 0
firewire_core 42274 2 firewire_sbp2,firewire_ohci
thermal 13058 0
fan 12594 0
pcspkr 12515 0
floppy 47893 0
crc_itu_t 12331 1 firewire_core
mii 12562 1 r8169
thermal_sys 17667 3 processor,thermal,fan
nls_base 12649 1 usbcore

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:40:f4:a9:d0:7d brd ff:ff:ff:ff:ff:ff
inet 192.168.1.2/24 brd 192.168.1.255 scope global eth0
inet6 2001:470:1f09:103e:240:f4ff:fea9:d07d/64 scope global dynamic
valid_lft 3183sec preferred_lft 3183sec
inet6 fe80::240:f4ff:fea9:d07d/64 scope link
valid_lft forever preferred_lft forever

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 11660 160 0 0 0 0 0 0 11660 160 0 0 0 0 0 0
eth0: 314981 2251 0 0 0 0 0 0 215539 1982 0 0 0 0 0 0

*** Protocol statistics:
Ip:
2339 total packets received
5 with invalid addresses
0 forwarded
0 incoming packets discarded
2334 incoming packets delivered
1835 requests sent out
72 dropped because of missing route
Icmp:
9 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 9
7 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 7
IcmpMsg:
InType3: 9
OutType3: 7
Tcp:
10 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
1 connections established
231 segments received
229 segments send out
2 segments retransmited
0 bad segments received.
4 resets sent
Udp:
2086 packets received
7 packets to unknown port received.
0 packet receive errors
1712 packets sent
UdpLite:
TcpExt:
2 TCP sockets finished time wait in fast timer
14 delayed acks sent
7 packets directly queued to recvmsg prequeue.
6 bytes directly received in process context from prequeue
41 packet headers predicted
74 acknowledgments not containing data payload received
22 predicted acknowledgments
2 other TCP timeouts
2 DSACKs received
TCPDSACKIgnoredOld: 2
IpExt:
InMcastPkts: 123
OutMcastPkts: 38
InBcastPkts: 613
OutBcastPkts: 278
InOctets: 294919
OutOctets: 174018
InMcastOctets: 21445
OutMcastOctets: 4977
InBcastOctets: 86373
OutBcastOctets: 41144

*** Device features:
eth0: 0x4180
lo: 0x13865

** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] [1106:0691] (rev 82)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Region 0: Memory at dd000000 (32-bit, prefetchable) [size=4M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] [1106:8598] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d8000000-dbffffff
Prefetchable memory behind bridge: 10000000-100fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C596 ISA [Mobile South] [1106:0596] (rev 12)
Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge [1106:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: pata_via

00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 08) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd

00:07.3 Host bridge [0600]: VIA Technologies, Inc. VT82C596 Power Management [1106:3050] (rev 20)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. Device [1106:e8e9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dd401000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at dc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

00:12.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at dd400000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at dc000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage LT Pro AGP-133 [1002:4c42] (rev dc) (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Rage LT Pro AGP 2X [1002:0040]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at da000000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 10000000 [disabled] [size=128K]
Capabilities: <access denied>


** Sound cards:


*** /root/out.d (full from-boot dmesg)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-2-686 (Debian 2.6.38-5) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 14:49:45 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.1 present.
[ 0.000000] DMI: Micronpc.com Millennia GS/694X-596B-977, BIOS 4.51 PG 10/20/99
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 0DD000000 mask FFFC00000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000fc00000 page 2M
[ 0.000000] 000fc00000 - 000fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to fff0000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 0e924000 - 0fc9c000
[ 0.000000] ACPI: RSDP 000f6bf0 00014 (v00 VIA694)
[ 0.000000] ACPI: RSDT 0fff3000 00028 (v01 AWARD AWRDACPI 30302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0fff3040 00074 (v01 AWARD AWRDACPI 30302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0fff30c0 0226C (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 0fff0000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fff0000
[ 0.000000] low ram: 0 - 0fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000fff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000fff0
[ 0.000000] On node 0 totalpages: 65407
[ 0.000000] free_area_init_node: node 0, pgdat c13ea5c0, node_mem_map cfdef200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60944 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ce400000 s27136 r0 d22016 u4194304
[ 0.000000] pcpu-alloc: s27136 r0 d22016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64895
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=3b61a0a8-b642-4e7c-b846-e1e9e16019cb ro bootkbd=uk quiet
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 234336k/262080k available (2646k kernel code, 27292k reserved, 1389k data, 392k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd07f0000 - 0xff7fe000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 0.000000] .init : 0xc13f1000 - 0xc1453000 ( 392 kB)
[ 0.000000] .data : 0xc12959e4 - 0xc13f0e80 (1389 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12959e4 (2646 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=ce01a000 soft=ce01c000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 400.929 MHz processor.
[ 0.008012] Calibrating delay loop (skipped), value calculated using timer frequency.. 801.85 BogoMIPS (lpj=1603716)
[ 0.008043] pid_max: default: 32768 minimum: 301
[ 0.012417] Security Framework initialized
[ 0.012453] SELinux: Disabled at boot.
[ 0.012746] Mount-cache hash table entries: 512
[ 0.014973] Initializing cgroup subsys ns
[ 0.014994] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.015014] Initializing cgroup subsys cpuacct
[ 0.015214] Initializing cgroup subsys devices
[ 0.015230] Initializing cgroup subsys freezer
[ 0.015246] Initializing cgroup subsys net_cls
[ 0.015261] Initializing cgroup subsys blkio
[ 0.015569] mce: CPU supports 5 MCE banks
[ 0.015829] SMP alternatives: switching to UP code
[ 0.030218] Freeing SMP alternatives: 16k freed
[ 0.030277] ACPI: Core revision 20110112
[ 0.036535] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.040299] weird, boot CPU (#0) not listed by the BIOS.
[ 0.040313] SMP motherboard not detected.
[ 0.040328] Local APIC not detected. Using dummy APIC emulation.
[ 0.040340] SMP disabled
[ 0.040353] Performance Events:
[ 0.040367] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.040380] no hardware sampling interrupt available.
[ 0.040395] p6 PMU driver.
[ 0.040426] ... version: 0
[ 0.040438] ... bit width: 32
[ 0.040450] ... generic registers: 2
[ 0.040462] ... value mask: 00000000ffffffff
[ 0.040476] ... max period: 000000007fffffff
[ 0.040489] ... fixed-purpose events: 0
[ 0.040501] ... event mask: 0000000000000003
[ 0.042344] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[ 0.042366] Brought up 1 CPUs
[ 0.042383] Total of 1 processors activated (801.85 BogoMIPS).
[ 0.043537] devtmpfs: initialized
[ 0.046675] print_constraints: dummy:
[ 0.047282] NET: Registered protocol family 16
[ 0.047962] ACPI: bus type pci registered
[ 0.080585] PCI: PCI BIOS revision 2.10 entry at 0xfb280, last bus=1
[ 0.080602] PCI: Using configuration type 1 for base access
[ 0.084263] bio: create slab <bio-0> at 0
[ 0.087279] ACPI: EC: Look up EC in DSDT
[ 0.095355] ACPI: Interpreter enabled
[ 0.095385] ACPI: (supports S0 S1 S5)
[ 0.095490] ACPI: Using PIC for interrupt routing
[ 0.111019] ACPI: No dock devices found.
[ 0.111036] HEST: Table not found.
[ 0.111060] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.111671] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.113006] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.113030] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x3fff] (ignored)
[ 0.113052] pci_root PNP0A03:00: host bridge window [io 0x4100-0x4fff] (ignored)
[ 0.113073] pci_root PNP0A03:00: host bridge window [io 0x5010-0xffff] (ignored)
[ 0.113094] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000cffff] (ignored)
[ 0.113115] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xffefffff] (ignored)
[ 0.113178] pci 0000:00:00.0: [1106:0691] type 0 class 0x000600
[ 0.113217] pci 0000:00:00.0: reg 10: [mem 0xdd000000-0xdd3fffff pref]
[ 0.113346] pci 0000:00:01.0: [1106:8598] type 1 class 0x000604
[ 0.113474] pci 0000:00:07.0: [1106:0596] type 0 class 0x000601
[ 0.113615] pci 0000:00:07.1: [1106:0571] type 0 class 0x000101
[ 0.113694] pci 0000:00:07.1: reg 20: [io 0xd000-0xd00f]
[ 0.113780] pci 0000:00:07.2: [1106:3038] type 0 class 0x000c03
[ 0.113858] pci 0000:00:07.2: reg 20: [io 0xd400-0xd41f]
[ 0.113942] pci 0000:00:07.3: [1106:3050] type 0 class 0x000600
[ 0.114091] pci 0000:00:10.0: [1106:3044] type 0 class 0x000c00
[ 0.114135] pci 0000:00:10.0: reg 10: [mem 0xdd401000-0xdd4017ff]
[ 0.114166] pci 0000:00:10.0: reg 14: [io 0xdc00-0xdc7f]
[ 0.114265] pci 0000:00:10.0: supports D2
[ 0.114283] pci 0000:00:10.0: PME# supported from D2 D3hot D3cold
[ 0.114304] pci 0000:00:10.0: PME# disabled
[ 0.114364] pci 0000:00:12.0: [10ec:8169] type 0 class 0x000200
[ 0.114406] pci 0000:00:12.0: reg 10: [io 0xe000-0xe0ff]
[ 0.114437] pci 0000:00:12.0: reg 14: [mem 0xdd400000-0xdd4000ff]
[ 0.114509] pci 0000:00:12.0: reg 30: [mem 0xdc000000-0xdc01ffff pref]
[ 0.114552] pci 0000:00:12.0: supports D1 D2
[ 0.114570] pci 0000:00:12.0: PME# supported from D1 D2 D3hot D3cold
[ 0.114589] pci 0000:00:12.0: PME# disabled
[ 0.114720] pci 0000:01:00.0: [1002:4c42] type 0 class 0x000300
[ 0.114766] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xd8ffffff]
[ 0.114796] pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
[ 0.114827] pci 0000:01:00.0: reg 18: [mem 0xda000000-0xda000fff]
[ 0.114888] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.114941] pci 0000:01:00.0: supports D1 D2
[ 0.115023] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.115045] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.115067] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff]
[ 0.115090] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.115122] pci_bus 0000:00: on NUMA node 0
[ 0.115148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.121611] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.122532] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123553] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 0.124673] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.125599] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.125619] vgaarb: loaded
[ 0.125872] PCI: Using ACPI for IRQ routing
[ 0.125895] PCI: pci_cache_line_size set to 32 bytes
[ 0.126022] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.126040] reserve RAM buffer: 000000000fff0000 - 000000000fffffff
[ 0.126915] Switching to clocksource pit
[ 0.132580] pnp: PnP ACPI init
[ 0.132725] ACPI: bus type pnp registered
[ 0.134052] pnp 00:00: [mem 0x000d0000-0x000d1fff]
[ 0.134074] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[ 0.134093] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[ 0.134112] pnp 00:00: [mem 0x000fc000-0x000fffff]
[ 0.134130] pnp 00:00: [mem 0x0fff0000-0x0fffffff]
[ 0.134148] pnp 00:00: [mem 0xffff0000-0xffffffff]
[ 0.134166] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.134184] pnp 00:00: [mem 0x00100000-0x0ffeffff]
[ 0.134506] system 00:00: [mem 0x000d0000-0x000d1fff] has been reserved
[ 0.134532] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.134555] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.134578] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.134601] system 00:00: [mem 0x0fff0000-0x0fffffff] could not be reserved
[ 0.134624] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.134647] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.134670] system 00:00: [mem 0x00100000-0x0ffeffff] could not be reserved
[ 0.134698] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.135336] pnp 00:01: [bus 00-ff]
[ 0.135358] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.135378] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.135397] pnp 00:01: [io 0x0d00-0x3fff window]
[ 0.135415] pnp 00:01: [io 0x4000-0x407f]
[ 0.135432] pnp 00:01: [io 0x4080-0x40ff]
[ 0.135450] pnp 00:01: [io 0x4100-0x4fff window]
[ 0.135468] pnp 00:01: [io 0x5000-0x500f]
[ 0.135486] pnp 00:01: [io 0x5010-0xffff window]
[ 0.135506] pnp 00:01: [mem 0x000a0000-0x000cffff window]
[ 0.135526] pnp 00:01: [mem 0x10000000-0xffefffff window]
[ 0.135786] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.136578] pnp 00:02: [io 0x0010-0x001f]
[ 0.136598] pnp 00:02: [io 0x0022-0x003f]
[ 0.136616] pnp 00:02: [io 0x0044-0x005f]
[ 0.136633] pnp 00:02: [io 0x0062-0x0063]
[ 0.136650] pnp 00:02: [io 0x0065-0x006f]
[ 0.136667] pnp 00:02: [io 0x0074-0x007f]
[ 0.136685] pnp 00:02: [io 0x0091-0x0093]
[ 0.136702] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.136719] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.136737] pnp 00:02: [io 0x03f0-0x03f1]
[ 0.136754] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.137114] system 00:02: [io 0x03f0-0x03f1] has been reserved
[ 0.137139] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.137165] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.137264] pnp 00:03: [dma 4]
[ 0.137283] pnp 00:03: [io 0x0000-0x000f]
[ 0.137300] pnp 00:03: [io 0x0080-0x0090]
[ 0.137318] pnp 00:03: [io 0x0094-0x009f]
[ 0.137335] pnp 00:03: [io 0x00c0-0x00df]
[ 0.137557] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.137651] pnp 00:04: [io 0x0070-0x0073]
[ 0.137676] pnp 00:04: [irq 8]
[ 0.137929] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.138010] pnp 00:05: [io 0x0061]
[ 0.138237] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.138319] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.138340] pnp 00:06: [irq 13]
[ 0.138568] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.139290] pnp 00:07: [io 0x03f2-0x03f5]
[ 0.139310] pnp 00:07: [io 0x03f7]
[ 0.139329] pnp 00:07: [irq 6]
[ 0.139347] pnp 00:07: [dma 2]
[ 0.139710] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.140735] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.140756] pnp 00:08: [irq 4]
[ 0.141218] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.142243] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.142264] pnp 00:09: [irq 3]
[ 0.142639] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.144776] pnp 00:0a: [io 0x0378-0x037f]
[ 0.144796] pnp 00:0a: [io 0x0778-0x077b]
[ 0.144816] pnp 00:0a: [irq 7]
[ 0.144832] pnp 00:0a: [dma 3]
[ 0.145318] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.145545] pnp 00:0b: [irq 12]
[ 0.145780] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.145979] pnp 00:0c: [io 0x0060]
[ 0.145997] pnp 00:0c: [io 0x0064]
[ 0.146016] pnp 00:0c: [irq 1]
[ 0.146257] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.146321] pnp: PnP ACPI: found 13 devices
[ 0.146335] ACPI: ACPI bus type pnp unregistered
[ 0.146358] PnPBIOS: Disabled by ACPI PNP
[ 0.199199] Switching to clocksource acpi_pm
[ 0.199374] pci 0000:00:01.0: BAR 15: assigned [mem 0x10000000-0x100fffff pref]
[ 0.199403] pci 0000:01:00.0: BAR 6: assigned [mem 0x10000000-0x1001ffff pref]
[ 0.199425] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.199445] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.199470] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff]
[ 0.199492] pci 0000:00:01.0: bridge window [mem 0x10000000-0x100fffff pref]
[ 0.199539] pci 0000:00:01.0: setting latency timer to 64
[ 0.199563] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.199582] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.199603] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.199622] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xdbffffff]
[ 0.199643] pci_bus 0000:01: resource 2 [mem 0x10000000-0x100fffff pref]
[ 0.200101] NET: Registered protocol family 2
[ 0.200693] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.201094] Switched to NOHz mode on CPU #0
[ 0.202362] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.202779] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.203145] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.203161] TCP reno registered
[ 0.203181] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.203252] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.204753] NET: Registered protocol family 1
[ 0.204845] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.204876] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 0.204955] pci 0000:01:00.0: Boot video device
[ 0.204974] PCI: CLS 32 bytes, default 32
[ 0.205285] Unpacking initramfs...
[ 3.956894] Freeing initrd memory: 19936k freed
[ 4.065609] audit: initializing netlink socket (disabled)
[ 4.065683] type=2000 audit(1305145501.063:1): initialized
[ 4.131964] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 4.146756] VFS: Disk quotas dquot_6.5.2
[ 4.147717] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.148820] msgmni has been set to 496
[ 4.150391] alg: No test for stdrng (krng)
[ 4.150877] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.150900] io scheduler noop registered
[ 4.150913] io scheduler deadline registered
[ 4.151059] io scheduler cfq registered (default)
[ 4.152518] ERST: Table is not found!
[ 4.152638] isapnp: Scanning for PnP cards...
[ 4.507275] isapnp: No Plug & Play device found
[ 4.507747] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.528467] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.549253] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 4.571396] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.592429] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 4.593588] Linux agpgart interface v0.103
[ 4.594360] agpgart: Detected VIA Apollo Pro 133 chipset
[ 4.597500] agpgart-via 0000:00:00.0: AGP aperture is 4M @ 0xdd000000
[ 4.598179] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.601925] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.601970] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.602984] mousedev: PS/2 mouse device common for all mice
[ 4.603264] rtc_cmos 00:04: RTC can wake from S4
[ 4.603592] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.603659] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 4.603736] cpuidle: using governor ladder
[ 4.603751] cpuidle: using governor menu
[ 4.605681] TCP cubic registered
[ 4.607376] NET: Registered protocol family 10
[ 4.612649] Mobile IPv6
[ 4.612669] NET: Registered protocol family 17
[ 4.612710] Registering the dns_resolver key type
[ 4.612804] Using IPI No-Shortcut mode
[ 4.613544] PM: Hibernation image not present or could not be loaded.
[ 4.613615] registered taskstats version 1
[ 4.614239] rtc_cmos 00:04: setting system clock to 2011-05-11 20:25:02 UTC (1305145502)
[ 4.614380] Initalizing network drop monitor service
[ 4.614817] Freeing unused kernel memory: 392k freed
[ 4.616800] Write protecting the kernel text: 2648k
[ 4.616935] Write protecting the kernel read-only data: 1000k
[ 4.626554] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.709986] <30>udevd[44]: starting version 168
[ 5.124201] Refined TSC clocksource calibration: 400.908 MHz.
[ 5.124226] Switching to clocksource tsc
[ 5.359201] Floppy drive(s): fd0 is 1.44M
[ 5.376541] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 5.378005] ACPI: Fan [FAN] (on)
[ 5.396527] FDC 0 is a post-1991 82077
[ 5.588971] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.588992] ACPI: Thermal Zone [THRM] (0 C)
[ 5.680521] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.682130] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 5.682150] PCI: setting IRQ 5 as level-triggered
[ 5.682180] r8169 0000:00:12.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 5.682264] r8169 0000:00:12.0: (unregistered net_device): no PCI Express capability
[ 5.720021] r8169 0000:00:12.0: eth0: RTL8110s at 0xd0806000, 00:40:f4:a9:d0:7d, XID 04000000 IRQ 5
[ 5.982791] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 5.982813] PCI: setting IRQ 11 as level-triggered
[ 5.982845] firewire_ohci 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 6.104473] firewire_ohci: Added fw-ohci device 0000:00:10.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x11
[ 6.106469] usbcore: registered new interface driver usbfs
[ 6.106614] usbcore: registered new interface driver hub
[ 6.106886] usbcore: registered new device driver usb
[ 6.147065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.174686] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.176944] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 6.176964] PCI: setting IRQ 10 as level-triggered
[ 6.176995] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 6.177042] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 6.177175] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 6.177274] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
[ 6.177490] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.177512] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.177531] usb usb1: Product: UHCI Host Controller
[ 6.177547] usb usb1: Manufacturer: Linux 2.6.38-2-686 uhci_hcd
[ 6.177563] usb usb1: SerialNumber: 0000:00:07.2
[ 6.178971] hub 1-0:1.0: USB hub found
[ 6.179013] hub 1-0:1.0: 2 ports detected
[ 6.197469] SCSI subsystem initialized
[ 6.459277] libata version 3.00 loaded.
[ 6.489362] pata_via 0000:00:07.1: version 0.3.4
[ 6.494117] scsi0 : pata_via
[ 6.495346] scsi1 : pata_via
[ 6.496281] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 6.496304] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 6.606996] firewire_core: created device fw0: GUID 00110600000069b8, S400
[ 6.660614] ata1.00: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133
[ 6.660636] ata1.00: 398297088 sectors, multi 16: LBA48
[ 6.676520] ata1.00: configured for UDMA/66
[ 6.677192] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y200P0 YAR4 PQ: 0 ANSI: 5
[ 6.848386] ata2.00: ATAPI: IOMEGA ZIP 100 ATAPI, 23.D, max PIO2, CDB intr
[ 6.848426] ata2.01: ATAPI: COMPAQ DVD-ROM GD-2500, 0011, max MWDMA2
[ 6.864359] ata2.00: configured for PIO2
[ 6.912302] ata2.01: configured for MWDMA2
[ 6.928529] scsi 1:0:0:0: Direct-Access IOMEGA ZIP 100 23.D PQ: 0 ANSI: 5
[ 6.948929] scsi 1:0:1:0: CD-ROM COMPAQ DVD-ROM GD-2500 0011 PQ: 0 ANSI: 5
[ 7.190975] sd 0:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
[ 7.191599] sd 0:0:0:0: [sda] Write Protect is off
[ 7.191623] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.191889] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.204308] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 7.238294] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
[ 7.238317] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.239260] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 7.277548] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 7.277627] ata1.00: BMDMA stat 0x25
[ 7.277690] ata1.00: failed command: READ DMA
[ 7.277777] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 7.277787] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 7.277905] ata1.00: status: { DRDY ERR }
[ 7.277964] ata1.00: error: { ICRC ABRT }
[ 7.278117] ata1: soft resetting link
[ 7.448524] ata1.00: configured for UDMA/66
[ 7.448586] ata1: EH complete
[ 7.527765] ata1.00: limiting speed to UDMA/44:PIO4
[ 7.527790] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 7.527864] ata1.00: BMDMA stat 0x25
[ 7.527927] ata1.00: failed command: READ DMA
[ 7.528014] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 7.528024] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 7.528196] ata1.00: status: { DRDY ERR }
[ 7.528258] ata1.00: error: { ICRC ABRT }
[ 7.528409] ata1: soft resetting link
[ 7.708508] ata1.00: configured for UDMA/44
[ 7.708553] ata1: EH complete
[ 7.750848] sda: sda1 sda2 < sda5 >
[ 7.753069] sda: detected capacity change from 0 to 203928109056
[ 7.755288] sda: detected capacity change from 0 to 203928109056
[ 7.756290] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.863627] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.869158] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.870202] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 8.257493] PM: Starting manual resume from disk
[ 8.257517] PM: Hibernation image partition 8:5 present
[ 8.257529] PM: Looking for hibernation image.
[ 8.258247] PM: Image not found (code -22)
[ 8.258262] PM: Hibernation image not present or could not be loaded.
[ 8.457862] EXT3-fs (sda1): recovery required on readonly filesystem
[ 8.457887] EXT3-fs (sda1): write access will be enabled during recovery
[ 8.465638] EXT3-fs: barriers not enabled
[ 8.703768] kjournald starting. Commit interval 5 seconds
[ 8.704536] EXT3-fs (sda1): recovery complete
[ 8.705806] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 10.674601] <30>udevd[206]: starting version 168
[ 11.627939] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 11.627990] ACPI: Power Button [PWRB]
[ 11.628583] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 11.628613] ACPI: Power Button [PWRF]
[ 11.868358] ACPI: acpi_idle registered with cpuidle
[ 11.868564] Marking TSC unstable due to TSC halts in idle
[ 11.895119] Switching to clocksource acpi_pm
[ 11.962045] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.226005] parport_pc 00:0a: reported by Plug and Play ACPI
[ 12.226162] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 12.244012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.595667] ACPI: resource vt596_smbus [io 0x5000-0x5007] conflicts with ACPI region SM06 [io 0x5006-0x5006]
[ 12.595690] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.424147] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 15.014073] Adding 746984k swap on /dev/sda5. Priority:-1 extents:1 across:746984k
[ 15.416470] EXT3-fs (sda1): using internal journal
[ 15.908342] loop: module loaded
[ 17.546459] fuse init (API version 7.16)
[ 17.800373] r8169 0000:00:12.0: eth0: link down
[ 17.800628] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.153905] r8169 0000:00:12.0: eth0: link up
[ 20.154109] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

*** /root/ntp.d (openntpd syslog exerpt)
May 11 17:00:28 Bloodstone ntpd[905]: adjusting local clock by -486.630147s
May 11 17:04:44 Bloodstone ntpd[905]: adjusting local clock by -486.448775s
May 11 17:08:56 Bloodstone ntpd[905]: adjusting local clock by -486.311607s
May 11 17:13:15 Bloodstone ntpd[905]: adjusting local clock by -486.177790s
May 11 17:17:34 Bloodstone ntpd[905]: adjusting local clock by -486.023306s
May 11 17:21:43 Bloodstone ntpd[905]: adjusting local clock by -485.904187s
May 11 17:26:03 Bloodstone ntpd[905]: adjusting local clock by -485.791888s
May 11 17:30:22 Bloodstone ntpd[905]: adjusting local clock by -485.593061s
May 11 17:34:31 Bloodstone ntpd[905]: adjusting local clock by -485.464050s
May 11 17:38:48 Bloodstone ntpd[905]: adjusting local clock by -485.313699s
May 11 17:43:03 Bloodstone ntpd[905]: adjusting local clock by -485.169494s
May 11 17:47:23 Bloodstone ntpd[905]: adjusting local clock by -485.026972s
May 11 17:51:45 Bloodstone ntpd[905]: adjusting local clock by -484.836308s
May 11 17:55:59 Bloodstone ntpd[905]: adjusting local clock by -484.717923s
May 11 18:00:17 Bloodstone ntpd[905]: adjusting local clock by -484.574000s
May 11 18:04:33 Bloodstone ntpd[905]: adjusting local clock by -484.431088s
May 11 18:08:53 Bloodstone ntpd[905]: adjusting local clock by -484.252213s
May 11 18:13:08 Bloodstone ntpd[905]: adjusting local clock by -484.114810s
May 11 18:17:22 Bloodstone ntpd[905]: adjusting local clock by -483.975247s
May 11 18:21:38 Bloodstone ntpd[905]: adjusting local clock by -483.819964s
May 11 18:25:53 Bloodstone ntpd[905]: adjusting local clock by -483.694611s
May 11 18:30:15 Bloodstone ntpd[905]: adjusting local clock by -483.558994s
May 11 18:34:36 Bloodstone ntpd[905]: adjusting local clock by -483.382167s
May 11 18:38:53 Bloodstone ntpd[905]: adjusting local clock by -483.212199s
May 11 18:43:07 Bloodstone ntpd[905]: adjusting local clock by -483.090977s
May 11 18:47:30 Bloodstone ntpd[905]: adjusting local clock by -482.934892s
May 11 18:51:45 Bloodstone ntpd[905]: adjusting local clock by -482.831925s
May 11 18:56:01 Bloodstone ntpd[905]: adjusting local clock by -482.645244s
May 11 19:00:56 Bloodstone ntpd[905]: adjusting local clock by -482.457096s
May 11 19:05:25 Bloodstone ntpd[905]: adjusting local clock by -482.370842s
May 11 19:09:36 Bloodstone ntpd[905]: adjusting local clock by -482.161926s
May 11 19:13:55 Bloodstone ntpd[905]: adjusting local clock by -482.033929s
May 11 19:18:14 Bloodstone ntpd[905]: adjusting local clock by -481.907495s
May 11 19:22:29 Bloodstone ntpd[905]: adjusting local clock by -481.727503s
May 11 19:26:46 Bloodstone ntpd[905]: adjusting local clock by -481.573618s
May 11 19:30:57 Bloodstone ntpd[905]: adjusting local clock by -481.436625s
May 11 19:35:15 Bloodstone ntpd[905]: adjusting local clock by -485.958508s
May 11 19:39:38 Bloodstone ntpd[905]: adjusting local clock by -485.856427s
May 11 19:43:57 Bloodstone ntpd[905]: adjusting local clock by -485.701451s
May 11 19:48:14 Bloodstone ntpd[905]: adjusting local clock by -485.565794s
May 11 19:52:32 Bloodstone ntpd[905]: adjusting local clock by -485.394002s
May 11 19:56:51 Bloodstone ntpd[905]: adjusting local clock by -485.284827s
May 11 20:01:02 Bloodstone ntpd[905]: adjusting local clock by -485.125139s
May 11 20:05:21 Bloodstone ntpd[905]: adjusting local clock by -484.943882s
May 11 20:09:40 Bloodstone ntpd[905]: adjusting local clock by -484.796325s
May 11 20:14:00 Bloodstone ntpd[905]: adjusting local clock by -484.670089s
May 11 20:18:22 Bloodstone ntpd[905]: adjusting local clock by -484.514918s
May 11 20:22:44 Bloodstone ntpd[905]: adjusting local clock by -484.345916s
May 11 20:27:00 Bloodstone ntpd[905]: adjusting local clock by -484.230885s
May 11 20:31:12 Bloodstone ntpd[905]: adjusting local clock by -484.075650s
May 11 20:35:29 Bloodstone ntpd[905]: adjusting local clock by -483.908911s
May 11 21:04:49 Bloodstone ntpd[906]: adjusting local clock by -490.346277s
May 11 21:09:03 Bloodstone ntpd[906]: adjusting local clock by -490.208271s
May 11 21:13:48 Bloodstone ntpd[906]: adjusting local clock by -490.086586s
May 11 21:18:09 Bloodstone ntpd[906]: adjusting local clock by -489.988770s
May 11 21:36:52 Bloodstone ntpd[904]: adjusting local clock by -490.406057s
May 11 21:45:45 Bloodstone ntpd[904]: adjusting local clock by -490.152395s
May 11 21:50:05 Bloodstone ntpd[904]: adjusting local clock by -490.016600s
May 11 21:54:03 Bloodstone ntpd[904]: adjusting local clock by -489.910416s
May 11 21:58:23 Bloodstone ntpd[904]: adjusting local clock by -489.755375s
May 11 22:02:41 Bloodstone ntpd[904]: adjusting local clock by -489.630706s
May 11 22:07:00 Bloodstone ntpd[904]: adjusting local clock by -489.458891s

-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.38-2-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.38-2-686 depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.38-2-686 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-2 Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.38-2-686 suggests:
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
ii linux-doc-2.6.38 2.6.38-5 Linux kernel specific documentatio

Versions of packages linux-image-2.6.38-2-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.29 Binary firmware for various driver
ii firmware-linux-nonfree 0.29 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.38-2-686/postinst/depmod-error-initrd-2.6.38-2-686: false
linux-image-2.6.38-2-686/postinst/ignoring-do-bootloader-2.6.38-2-686:
linux-image-2.6.38-2-686/prerm/removing-running-kernel-2.6.38-2-686: true
* linux-image-2.6.38-2-686/postinst/missing-firmware-2.6.38-2-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110511215513.1166.32767.reportbug@Bloodstone.loc al">http://lists.debian.org/20110511215513.1166.32767.reportbug@Bloodstone.loc al
 

Thread Tools




All times are GMT. The time now is 01:05 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org