Package: linux-2.6
Version: 2.6.39~rc6-1~experimental.1
Severity: normal

In the 2.6.39-rc* series of kernels, CONFIG_EEEPC_WMI seems to have gone
away. This module is needed to support hotkeys on the Eee PC.

$ grep CONFIG_EEE /boot/config-2.6.38-2-amd64
/boot/config-2.6.39-rc*-amd64
/boot/config-2.6.38-2-amd64:CONFIG_EEEPC_LAPTOP=m
/boot/config-2.6.38-2-amd64:CONFIG_EEEPC_WMI=m
/boot/config-2.6.39-rc5-amd64:CONFIG_EEEPC_LAPTOP=m
/boot/config-2.6.39-rc6-amd64:CONFIG_EEEPC_LAPTOP=m

Thanks,
Ben

-- Package-specific info:
** Version:
Linux version 2.6.39-rc6-amd64 (Debian 2.6.39~rc6-1~experimental.1) (maks@debian.org) (gcc version 4.4.5 (Debian 4.4.5-12) ) #1 SMP Sun May 8 13:50:44 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-rc5-amd64 root=UUID=b7d082d8-c134-477f-8b6d-1fbadd46fad7 ro quiet kexec_jump_back_entry=0xffff88007a28e450

** Not tainted

** Kernel log:
[ 3.613127] usb 1-6: Manufacturer: Azurewave
[ 3.613135] usb 1-6: SerialNumber: 200901010001
[ 3.864090] usb 2-1: new low speed USB device number 2 using uhci_hcd
[ 4.041306] usb 2-1: New USB device found, idVendor=046d, idProduct=c521
[ 4.041325] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.041339] usb 2-1: Product: USB Receiver
[ 4.041350] usb 2-1: Manufacturer: Logitech
[ 4.132558] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
[ 4.132983] generic-usb 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[ 4.164846] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
[ 4.165343] generic-usb 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[ 4.166233] usbcore: registered new interface driver usbhid
[ 4.166246] usbhid: USB HID core driver
[ 4.337845] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.688206] udevd[253]: starting version 168
[ 4.991695] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 5.024548] ACPI: Lid Switch [LID]
[ 5.024898] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 5.024925] ACPI: Sleep Button [SLPB]
[ 5.025238] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 5.025261] ACPI: Power Button [PWRB]
[ 5.025569] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.025592] ACPI: Power Button [PWRF]
[ 5.055593] wmi: Mapper loaded
[ 5.066006] ACPI: AC Adapter [AC0] (on-line)
[ 5.093747] ACPI: acpi_idle registered with cpuidle
[ 5.109513] Monitor-Mwait will be used to enter C-1 state
[ 5.109664] Monitor-Mwait will be used to enter C-2 state
[ 5.109701] Marking TSC unstable due to TSC halts in idle
[ 5.110387] Switching to clocksource hpet
[ 5.202939] ACPI: Battery Slot [BAT0] (battery present)
[ 5.877748] [drm] Initialized drm 1.1.0 20060810
[ 5.938739] cfg80211: Calling CRDA to update world regulatory domain
[ 6.060745] Linux video capture interface: v2.00
[ 6.261685] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[ 6.281756] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input7
[ 6.282049] usbcore: registered new interface driver uvcvideo
[ 6.282061] USB Video Class driver (v1.0.0)
[ 6.451248] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.451269] i915 0000:00:02.0: setting latency timer to 64
[ 6.514567] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.514596] ath9k 0000:02:00.0: setting latency timer to 64
[ 6.567354] ath: EEPROM regdomain: 0x60
[ 6.567367] ath: EEPROM indicates we should expect a direct regpair map
[ 6.567384] ath: Country alpha2 being used: 00
[ 6.567393] ath: Regpair used: 0x60
[ 6.587036] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 6.587061] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.587073] [drm] Driver supports precise vblank timestamp query.
[ 6.642066] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 6.645004] Registered led device: ath9k-phy0
[ 6.645039] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000360000, irq=17
[ 6.756091] composite sync not supported
[ 6.756463] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
[ 6.756847] [drm] initialized overlay support
[ 6.831809] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04733/0xa40000/0xa0000
[ 6.903846] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 7.035925] composite sync not supported
[ 7.062704] fbcon: inteldrmfb (fb0) is primary device
[ 7.115570] Console: switching to colour frame buffer device 128x37
[ 7.126417] fb0: inteldrmfb frame buffer device
[ 7.126424] drm: registered panic notifier
[ 7.134953] ACPI Warning: _BQC returned an invalid level (20110316/video-473)
[ 7.143180] acpi device:2c: registered as cooling_device2
[ 7.146313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 7.151684] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 7.153758] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.153935] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.154075] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 7.154163] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.231399] hda_codec: ALC269: BIOS auto-probing.
[ 7.235404] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.702553] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.759648] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,errors=remount-ro
[ 7.946079] loop: module loaded
[ 8.220379] usbfs: unrecognised mount option "devgid=$VBOX" or missing value
[ 8.224246] usbfs: mount parameter error.
[ 8.852733] RPC: Registered udp transport module.
[ 8.852748] RPC: Registered tcp transport module.
[ 8.852759] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.931061] FS-Cache: Loaded
[ 9.047785] FS-Cache: Netfs 'nfs' registered for caching
[ 9.121154] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 9.405639] fuse init (API version 7.16)
[ 9.794748] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.022660] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 11.428385] composite sync not supported
[ 11.460441] composite sync not supported
[ 12.369741] wlan0: authenticate with 74:ea:3a:a1:6b:98 (try 1)
[ 12.375327] wlan0: authenticated
[ 12.416135] wlan0: associate with 74:ea:3a:a1:6b:98 (try 1)
[ 12.457087] wlan0: RX AssocResp from 74:ea:3a:a1:6b:98 (capab=0x411 status=0 aid=1)
[ 12.457098] wlan0: associated
[ 12.465389] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 12.552904] Intel AES-NI instructions are not detected.
[ 12.574771] padlock_aes: VIA PadLock not detected.
[ 14.658381] composite sync not supported
[ 14.696652] composite sync not supported
[ 16.917107] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 23.136057] wlan0: no IPv6 routers present

** Model information
sys_vendor: ASUSTeK Computer INC.
product_name: 1001PX
product_version: x.x
chassis_vendor: ASUSTeK Computer INC.
chassis_version: x.x
bios_vendor: American Megatrends Inc.
bios_version: 0601
board_vendor: ASUSTeK Computer INC.
board_name: 1001PX
board_version: x.xx

** Loaded modules:
Module Size Used by
cryptd 14463 0
aes_x86_64 16796 3
aes_generic 37122 1 aes_x86_64
acpi_cpufreq 12849 1
mperf 12411 1 acpi_cpufreq
cpufreq_powersave 12454 0
cpufreq_stats 12713 0
cpufreq_userspace 12576 0
cpufreq_conservative 13147 0
binfmt_misc 12914 1
uinput 17392 1
fuse 61554 1
nfsd 258506 2
nfs 255250 0
lockd 70844 2 nfsd,nfs
fscache 36071 1 nfs
auth_rpcgss 36788 2 nfsd,nfs
nfs_acl 12511 2 nfsd,nfs
sunrpc 166224 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
loop 22479 0
snd_hda_codec_realtek 283734 1
snd_hda_intel 25946 1
snd_hda_codec 67865 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13148 1 snd_hda_codec
snd_pcm_oss 40662 0
arc4 12458 2
snd_mixer_oss 17905 1 snd_pcm_oss
ecb 12737 2
snd_pcm 67276 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
ath9k 71748 0
i915 329756 2
snd_seq_midi 12848 0
mac80211 181270 1 ath9k
snd_rawmidi 22963 1 snd_seq_midi
uvcvideo 57380 0
ath9k_common 12732 1 ath9k
ath9k_hw 277119 2 ath9k,ath9k_common
joydev 17138 0
videodev 66266 1 uvcvideo
drm_kms_helper 26950 1 i915
v4l2_compat_ioctl32 16575 1 videodev
ath 21306 2 ath9k,ath9k_hw
snd_seq_midi_event 13316 1 snd_seq_midi
snd_seq 44678 2 snd_seq_midi,snd_seq_midi_event
cfg80211 126244 3 ath9k,mac80211,ath
tpm_tis 13125 0
snd_timer 22658 2 snd_pcm,snd_seq
drm 166500 3 i915,drm_kms_helper
snd_seq_device 13155 3 snd_seq_midi,snd_rawmidi,snd_seq
tpm 17756 1 tpm_tis
snd 52324 13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec, snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_ra wmidi,snd_seq,snd_timer,snd_seq_device
psmouse 55199 0
tpm_bios 12903 1 tpm
evdev 17475 19
serio_raw 12878 0
i2c_algo_bit 12834 1 i915
rfkill 19014 1 cfg80211
i2c_core 23766 5 i915,videodev,drm_kms_helper,drm,i2c_algo_bit
soundcore 13014 1 snd
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
battery 13109 0
processor 27431 3 acpi_cpufreq
ac 12624 0
video 17553 1 i915
wmi 13202 0
power_supply 13475 2 battery,ac
button 12895 1 i915
ext4 317207 1
mbcache 12930 1 ext4
jbd2 65105 1 ext4
crc16 12343 1 ext4
usbhid 39946 0
hid 72745 1 usbhid
sd_mod 35644 2
crc_t10dif 12348 1 sd_mod
ahci 25089 1
libahci 22616 1 ahci
libata 151572 2 ahci,libahci
uhci_hcd 26290 0
scsi_mod 161510 2 sd_mod,libata
ehci_hcd 39487 0
usbcore 127203 5 uvcvideo,usbhid,uhci_hcd,ehci_hcd
thermal 17330 0
thermal_sys 17939 3 video,processor,thermal
atl1c 31796 0

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug wlan0
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf


iface eth0 inet static
address 192.168.1.50
netmask 255.255.255.0
gateway 192.168.1.1
nameserver 192.168.1.1



iface default inet dhcp


** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 48:5b:39:7e:4e:99 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 1c:4b:d6:85:e3:bf brd ff:ff:ff:ff:ff:ff
inet 192.168.1.50/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::1e4b:d6ff:fe85:e3bf/64 scope link
valid_lft forever preferred_lft forever

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 34585 88 0 0 0 0 0 0 34585 88 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 5547423 4047 0 0 0 0 0 0 295428 2939 0 0 0 0 0 0

*** Protocol statistics:
Ip:
4048 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
4046 incoming packets delivered
2914 requests sent out
32 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
30 active connections openings
2 passive connection openings
0 failed connection attempts
0 connection resets received
3 connections established
3909 segments received
2789 segments send out
0 segments retransmited
0 bad segments received.
10 resets sent
Udp:
149 packets received
0 packets to unknown port received.
0 packet receive errors
135 packets sent
UdpLite:
TcpExt:
5 TCP sockets finished time wait in fast timer
18 delayed acks sent
1 packets directly queued to recvmsg prequeue.
1 bytes directly received in process context from prequeue
3277 packet headers predicted
100 acknowledgments not containing data payload received
9 predicted acknowledgments
2 connections reset due to unexpected data
IpExt:
InMcastPkts: 9
OutMcastPkts: 11
InBcastPkts: 14
InOctets: 5494593
OutOctets: 191550
InMcastOctets: 3473
OutMcastOctets: 3553
InBcastOctets: 3234

*** Device features:
eth0: 0x114189
lo: 0x201b7465
wlan0: 0x6000

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012]
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8437]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 7f900000-7fafffff
Prefetchable memory behind bridge: 000000007fb00000-000000007fcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7f00000-f7ffffff
Prefetchable memory behind bridge: 000000007f700000-000000007f8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=32]
Region 5: Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 0400 [size=32]

01:00.0 Ethernet controller [0200]: Atheros Communications AR8132 Fast Ethernet [1969:1062] (rev c0)
Subsystem: ASUSTeK Computer Inc. Device [1043:838a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c

02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave Device [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13d3:5702 IMC Networks
Bus 002 Device 002: ID 046d:c521 Logitech, Inc. Cordless Mouse Receiver


-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (800, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.39-rc6-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_CA.utf8, LC_CTYPE=en_CA.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.39-rc6-amd64 depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.39-rc6-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver

Versions of packages linux-image-2.6.39-rc6-amd64 suggests:
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
pn linux-doc-2.6.39 <none> (no description available)

Versions of packages linux-image-2.6.39-rc6-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.29 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.39-rc6-amd64/postinst/ignoring-do-bootloader-2.6.39-rc6-amd64:
linux-image-2.6.39-rc6-amd64/prerm/removing-running-kernel-2.6.39-rc6-amd64: true
linux-image-2.6.39-rc6-amd64/postinst/depmod-error-initrd-2.6.39-rc6-amd64: false
linux-image-2.6.39-rc6-amd64/postinst/missing-firmware-2.6.39-rc6-amd64:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110509090042.5330.18206.reportbug@shade.edennet" >http://lists.debian.org/20110509090042.5330.18206.reportbug@shade.edennet