FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-07-2011, 10:31 AM
Mike
 
Default Bug#625953: linux-2.6: orinoco_pci module is no longer present

Package: linux-2.6
Version: 2.6.38-2
Severity: critical
Justification: breaks the whole system


As per subject, the orinoco_pci module is missing from 2.6.38 kernel images, so my router
can no longer connect to the network.

-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110507103107.3576.18188.reportbug@wibble.chf">ht tp://lists.debian.org/20110507103107.3576.18188.reportbug@wibble.chf
 
Old 05-07-2011, 02:26 PM
Geoff Simmons
 
Default Bug#625953: linux-2.6: orinoco_pci module is no longer present

Hi Mike,

On Sat, May 07, 2011 at 11:31:07AM +0100, Mike wrote:
> As per subject, the orinoco_pci module is missing from 2.6.38 kernel
> images, so my router can no longer connect to the network.

Prism 2/2.5/3 support in the orinoco driver (HERMES_PRISM) is disabled
by default as of Linux 2.6.35 [1]. As PCI_HERMES depends on
HERMES_PRISM, this module was not built.

The hostap driver provides better support for Prism 2/2.5/3-based PCI
devices, including firmware downloading and WPA support. Consider using
the available hostap_pci module.

Geoff

[1] http://git.kernel.org/linus/484b4dd582867c6cfec3a1feb128d60af21c4978



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110507142643.GC2616@chmmr.gsimmons.org">http://lists.debian.org/20110507142643.GC2616@chmmr.gsimmons.org
 
Old 05-09-2011, 06:51 PM
Mike Ricketts
 
Default Bug#625953: linux-2.6: orinoco_pci module is no longer present

On Sun, 8 May 2011, Geoff Simmons wrote:


The hostap driver provides better support for Prism 2/2.5/3-based PCI
devices, including firmware downloading and WPA support. Consider using
the available hostap_pci module.

I have finally had time to try this. The hostap_pci module does not work
at all for my card. It detects it, and allows me to configure it, but it
does not actually send or receive any packets


--
Mike Ricketts <mike@earth.li> http://www.earth.li/~mike/

Don't let your mind wander -- it's too little to be let out alone.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: Pine.LNX.4.64.1105091949450.32120@heaven.on.earth. li">http://lists.debian.org/Pine.LNX.4.64.1105091949450.32120@heaven.on.earth. li
 
Old 05-09-2011, 09:03 PM
Ben Hutchings
 
Default Bug#625953: linux-2.6: orinoco_pci module is no longer present

On Mon, May 09, 2011 at 07:51:43PM +0100, Mike Ricketts wrote:
> On Sun, 8 May 2011, Geoff Simmons wrote:
>
> >The hostap driver provides better support for Prism 2/2.5/3-based PCI
> >devices, including firmware downloading and WPA support. Consider using
> >the available hostap_pci module.
> >
> I have finally had time to try this. The hostap_pci module does not
> work at all for my card. It detects it, and allows me to configure
> it, but it does not actually send or receive any packets

Please can you provide some information about the hardware (from lspci)
and the driver log messages from hostap_pci. Your initial bug report was
missing these.

Ben.

--
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
- Albert Camus



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110509210324.GM2268@decadent.org.uk">http://lists.debian.org/20110509210324.GM2268@decadent.org.uk
 
Old 05-10-2011, 07:38 AM
Mike Ricketts
 
Default Bug#625953: linux-2.6: orinoco_pci module is no longer present

On Mon, 9 May 2011, Ben Hutchings wrote:


I have finally had time to try this. The hostap_pci module does not
work at all for my card. It detects it, and allows me to configure
it, but it does not actually send or receive any packets


Please can you provide some information about the hardware (from lspci)
and the driver log messages from hostap_pci. Your initial bug report was
missing these.


Looking through the dmesg log, there is something very odd going on, in
that the hostap driver appears to have created both a wlan0 and a wifi0.
udev tried to rename both of these to eth0, but (unsuprisingly) failed -
so I ended up with:


eth0 (which was originally wlan0, which does not work
wifi0-eth0 (which was originally wifi0)

My udev is configured thusly - maybe this is not correct:
# This file was automatically generated by the /lib/udev/write_net_rules
# program run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.

# PCI device 0x1260:0x3873 (orinoco_pci)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:09:5b:91:b4:d5", NAME="eth0"

# PCI device 0x8086:0x1229 (e100)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:90:27:7d:4f:c1", NAME="eth1"

# PCI device 0x10ec:0x8136 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1f:e2:4d:26:2c", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

# PCI device 0x8086:0x10d3 (e1000e)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1b:21:2f:17:f6", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3"


I tried configuring wifi0-eth0 instead of eth0, and things improved - it
seemed to work for about 10 minutes, before dropping out again. At the
point it dropped, these errors were logged:

May 9 19:53:03 wibble kernel: [ 1385.797648] wifi0-eth0: Deauthenticate all stations
May 9 19:53:17 wibble kernel: [ 1399.748039] wifi0-eth0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
May 9 19:53:17 wibble kernel: [ 1400.033415] wifi0-eth0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
May 9 19:53:17 wibble kernel: [ 1400.100778] wifi0-eth0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
May 9 19:53:17 wibble kernel: [ 1400.284335] wifi0-eth0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
May 9 19:53:18 wibble kernel: [ 1400.535118] wifi0-eth0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
May 9 19:53:18 wibble kernel: [ 1400.735920] wifi0-eth0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
May 9 19:53:18 wibble kernel: [ 1401.343013] wifi0-eth0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
May 9 19:53:19 wibble kernel: [ 1401.700024] wifi0-eth0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
May 9 19:53:19 wibble kernel: [ 1401.978109] wifi0-eth0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
May 9 19:53:21 wibble kernel: [ 1403.586140] wifi0-eth0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
May 9 19:53:21 wibble kernel: [ 1404.220220] wifi0-eth0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
May 9 19:58:02 wibble kernel: [ 1684.982056] wifi0-eth0: STA 88:9f:fa:ff:9e:3c did not ACK activity poll frame
May 9 19:58:03 wibble kernel: [ 1685.960020] wifi0-eth0: sending disassociation info to STA 88:9f:fa:ff:9e:3c(last=271152, jiffies=346490)
May 9 19:58:04 wibble kernel: [ 1686.960025] wifi0-eth0: sending deauthentication info to STA 88:9f:fa:ff:9e:3c(last=271152, jiffies=346740)
May 9 19:58:04 wibble kernel: [ 1686.982698] wifi0-eth0: Could not find STA 88:9f:fa:ff:9e:3c for this TX error (@346745)


The problem device is 04:00.0 - the other netork cards (using other
drivers) are all fine.


00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00:04.0 PCI bridge: ATI Technologies Inc Device 7914
00:05.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS690 [Radeon X1200 Series]
02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
04:00.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
04:01.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08)


And here is dmesg from boot:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-2-686 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 05:24:21 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077f90000 (usable)
[ 0.000000] BIOS-e820: 0000000077f90000 - 0000000077f9e000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000077f9e000 - 0000000077fe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077fe0000 - 0000000077fee000 (reserved)
[ 0.000000] BIOS-e820: 0000000077ff0000 - 0000000078000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: FOXCONN A6VMX/A6VMX, BIOS 080014 10/13/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x77f90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 36e34000 - 37712000
[ 0.000000] ACPI: RSDP 000fa300 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 77f90000 0003C (v01 101308 RSDT0902 20081013 MSFT 00000097)
[ 0.000000] ACPI: FACP 77f90200 00084 (v02 101308 FACP0902 20081013 MSFT 00000097)
[ 0.000000] ACPI: DSDT 77f90440 04C48 (v01 772F1 772F1P14 00000014 INTL 20051117)
[ 0.000000] ACPI: FACS 77f9e000 00040
[ 0.000000] ACPI: APIC 77f90390 0006C (v01 101308 APIC0902 20081013 MSFT 00000097)
[ 0.000000] ACPI: MCFG 77f90400 0003C (v01 101308 OEMMCFG 20081013 MSFT 00000097)
[ 0.000000] ACPI: OEMB 77f9e040 00071 (v01 101308 OEMB0902 20081013 MSFT 00000097)
[ 0.000000] ACPI: HPET 77f95090 00038 (v01 101308 OEMHPET 20081013 MSFT 00000097)
[ 0.000000] ACPI: SSDT 77f950d0 000D3 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1031MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x00077f90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00077f90
[ 0.000000] On node 0 totalpages: 491295
[ 0.000000] free_area_init_node: node 0, pgdat c13ea5c0, node_mem_map f5f34200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2064 pages used for memmap
[ 0.000000] HighMem zone: 262018 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 78000000 (gap: 78000000:87f00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5800000 s27136 r0 d22016 u1048576
[ 0.000000] pcpu-alloc: s27136 r0 d22016 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487455

[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=469abb04-9bf4-44be-a288-3064b7a9a66d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:00077f90)
[ 0.000000] Memory: 1934668k/1965632k available (2646k kernel code, 30512k reserved, 1389k data, 392k init, 1056328k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13f1000 - 0xc1453000 ( 392 kB)
[ 0.000000] .data : 0xc1295864 - 0xc13f0e80 (1389 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1295864 (2646 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f540e000 soft=f5420000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1799.976 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.95 BogoMIPS (lpj=7199904)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004114] Security Framework initialized
[ 0.004119] SELinux: Disabled at boot.
[ 0.004155] Mount-cache hash table entries: 512
[ 0.004514] Initializing cgroup subsys ns
[ 0.004518] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004521] Initializing cgroup subsys cpuacct
[ 0.004551] Initializing cgroup subsys devices
[ 0.004554] Initializing cgroup subsys freezer
[ 0.004557] Initializing cgroup subsys net_cls
[ 0.004559] Initializing cgroup subsys blkio
[ 0.008016] mce: CPU supports 5 MCE banks
[ 0.008028] using C1E aware idle routine
[ 0.008333] SMP alternatives: switching to UP code
[ 0.012719] ACPI: Core revision 20110112
[ 0.015465] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.015979] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.055913] CPU0: AMD Sempron(tm) Processor 3400+ stepping 02
[ 0.056003] Performance Events: AMD PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 4
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000000f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Brought up 1 CPUs
[ 0.056003] Total of 1 processors activated (3599.95 BogoMIPS).
[ 0.056003] devtmpfs: initialized
[ 0.056003] print_constraints: dummy:
[ 0.056003] NET: Registered protocol family 16

[ 0.056003] node 0 link 0: io port [1000, ffffff]
[ 0.056003] TOM: 0000000080000000 aka 2048M
[ 0.056003] node 0 link 0: mmio [f0000000, f7feffff]
[ 0.056003] node 0 link 0: mmio [e0000000, efffffff]
[ 0.056003] node 0 link 0: mmio [80000000, dfffffff]
[ 0.056003] node 0 link 0: mmio [a0000, bffff]
[ 0.056003] node 0 link 0: mmio [f7ff0000, ffffffff]
[ 0.056003] bus: [00, 07] on node 0 link 0
[ 0.056003] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.056003] bus: 00 index 1 [mem 0x80000000-0xffffffff]
[ 0.056003] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.056003] ACPI: bus type pci registered
[ 0.056003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.056003] PCI: not using MMCONFIG
[ 0.056003] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.056003] PCI: Using configuration type 1 for base access
[ 0.056003] bio: create slab <bio-0> at 0
[ 0.056003] ACPI: EC: Look up EC in DSDT
[ 0.056526] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.058924] ACPI: Interpreter enabled
[ 0.058928] ACPI: (supports S0 S3 S4 S5)
[ 0.058951] ACPI: Using IOAPIC for interrupt routing
[ 0.058982] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.059966] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.059969] PCI: Using MMCONFIG for extended config space
[ 0.066283] ACPI: No dock devices found.
[ 0.066287] HEST: Table not found.
[ 0.066292] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.066400] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.066625] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.066629] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.066633] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.066636] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.066640] pci_root PNP0A03:00: host bridge window [mem 0x78000000-0xdfffffff]
[ 0.066644] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff]
[ 0.066651] pci_root PNP0A03:00: address space collision: host bridge window [mem 0x000d0000-0x000dffff] conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff]
[ 0.066711] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600
[ 0.066748] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604
[ 0.066797] pci 0000:00:04.0: [1002:7914] type 1 class 0x000604
[ 0.066831] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.066836] pci 0000:00:04.0: PME# disabled
[ 0.066854] pci 0000:00:05.0: [1002:7915] type 1 class 0x000604
[ 0.066888] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.066892] pci 0000:00:05.0: PME# disabled
[ 0.066935] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101
[ 0.066960] pci 0000:00:12.0: reg 10: [io 0xa000-0xa007]
[ 0.066972] pci 0000:00:12.0: reg 14: [io 0x9000-0x9003]
[ 0.066985] pci 0000:00:12.0: reg 18: [io 0x8000-0x8007]
[ 0.066998] pci 0000:00:12.0: reg 1c: [io 0x7000-0x7003]
[ 0.067010] pci 0000:00:12.0: reg 20: [io 0x6000-0x600f]
[ 0.067023] pci 0000:00:12.0: reg 24: [mem 0xfe4ff800-0xfe4ffbff]
[ 0.067049] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.067092] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.067109] pci 0000:00:13.0: reg 10: [mem 0xfe4fe000-0xfe4fefff]
[ 0.067188] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.067205] pci 0000:00:13.1: reg 10: [mem 0xfe4fd000-0xfe4fdfff]
[ 0.067284] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.067301] pci 0000:00:13.2: reg 10: [mem 0xfe4fc000-0xfe4fcfff]
[ 0.067380] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.067397] pci 0000:00:13.3: reg 10: [mem 0xfe4fb000-0xfe4fbfff]
[ 0.067475] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.067493] pci 0000:00:13.4: reg 10: [mem 0xfe4fa000-0xfe4fafff]
[ 0.067578] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.067602] pci 0000:00:13.5: reg 10: [mem 0xfe4ff000-0xfe4ff0ff]
[ 0.067688] pci 0000:00:13.5: supports D1 D2
[ 0.067691] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.067696] pci 0000:00:13.5: PME# disabled
[ 0.067952] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.068712] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.075187] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.075209] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.075221] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.075233] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.075246] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.075258] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.075323] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.075353] pci 0000:00:14.2: reg 10: [mem 0xfe4f4000-0xfe4f7fff 64bit]
[ 0.075430] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.075435] pci 0000:00:14.2: PME# disabled
[ 0.075458] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.075548] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.075605] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.075632] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.075655] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.075678] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.075736] pci 0000:01:05.0: [1002:791e] type 0 class 0x000300
[ 0.075750] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.075761] pci 0000:01:05.0: reg 18: [mem 0xfe6f0000-0xfe6fffff 64bit]
[ 0.075768] pci 0000:01:05.0: reg 20: [io 0xb000-0xb0ff]
[ 0.075775] pci 0000:01:05.0: reg 24: [mem 0xfe500000-0xfe5fffff]
[ 0.075792] pci 0000:01:05.0: supports D1 D2
[ 0.075812] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.075817] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.075822] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe6fffff]
[ 0.075827] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.075883] pci 0000:02:00.0: [8086:10d3] type 0 class 0x000200
[ 0.075907] pci 0000:02:00.0: reg 10: [mem 0xfe7e0000-0xfe7fffff]
[ 0.076015] pci 0000:02:00.0: reg 14: [mem 0xfe700000-0xfe77ffff]
[ 0.076032] pci 0000:02:00.0: reg 18: [io 0xc800-0xc81f]
[ 0.076050] pci 0000:02:00.0: reg 1c: [mem 0xfe7dc000-0xfe7dffff]
[ 0.076095] pci 0000:02:00.0: reg 30: [mem 0xfe780000-0xfe7bffff pref]
[ 0.076146] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.076153] pci 0000:02:00.0: PME# disabled
[ 0.084024] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.084029] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff]
[ 0.084034] pci 0000:00:04.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.084039] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.084092] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.084110] pci 0000:03:00.0: reg 10: [io 0xd800-0xd8ff]
[ 0.084139] pci 0000:03:00.0: reg 18: [mem 0xfe8ff000-0xfe8fffff 64bit]
[ 0.084172] pci 0000:03:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref]
[ 0.084215] pci 0000:03:00.0: supports D1 D2
[ 0.084217] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.084223] pci 0000:03:00.0: PME# disabled
[ 0.084244] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.084254] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.084260] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.084264] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.084269] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.084304] pci 0000:04:00.0: [1260:3873] type 0 class 0x000280
[ 0.084331] pci 0000:04:00.0: reg 10: [mem 0xfdfff000-0xfdffffff pref]
[ 0.084434] pci 0000:04:00.0: supports D1 D2
[ 0.084437] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.084444] pci 0000:04:00.0: PME# disabled
[ 0.084470] pci 0000:04:01.0: [8086:1229] type 0 class 0x000200
[ 0.084495] pci 0000:04:01.0: reg 10: [mem 0xfebff000-0xfebfffff]
[ 0.084511] pci 0000:04:01.0: reg 14: [io 0xe800-0xe83f]
[ 0.084526] pci 0000:04:01.0: reg 18: [mem 0xfea00000-0xfeafffff]
[ 0.084576] pci 0000:04:01.0: reg 30: [mem 0xfe900000-0xfe9fffff pref]
[ 0.084604] pci 0000:04:01.0: supports D1 D2
[ 0.084607] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.084613] pci 0000:04:01.0: PME# disabled
[ 0.084676] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.084682] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.084688] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfebfffff]
[ 0.084694] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 0.084698] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.084702] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.084705] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.084709] pci 0000:00:14.4: bridge window [mem 0x78000000-0xdfffffff] (subtractive decode)
[ 0.084713] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode)
[ 0.084730] pci_bus 0000:00: on NUMA node 0
[ 0.084734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.084895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.084934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.084967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.085015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.085123] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.090544] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.090593] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15)
[ 0.090639] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.090685] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.090732] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.090778] ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
[ 0.090820] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.090867] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 12 14 15) *0, disabled.
[ 0.090981] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.090986] vgaarb: loaded
[ 0.091029] PCI: Using ACPI for IRQ routing
[ 0.091034] PCI: pci_cache_line_size set to 64 bytes
[ 0.091580] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.091583] reserve RAM buffer: 0000000077f90000 - 0000000077ffffff
[ 0.091735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

[ 0.091741] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.093034] Switching to clocksource hpet
[ 0.094274] pnp: PnP ACPI init
[ 0.094298] ACPI: bus type pnp registered
[ 0.094447] pnp 00:00: [bus 00-ff]
[ 0.094450] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.094453] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.094457] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.094460] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.094463] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.094470] pnp 00:00: [mem 0x78000000-0xdfffffff window]
[ 0.094473] pnp 00:00: [mem 0xf0000000-0xfed44fff window]
[ 0.094535] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.094576] pnp 00:01: [dma 4]
[ 0.094578] pnp 00:01: [io 0x0000-0x000f]
[ 0.094581] pnp 00:01: [io 0x0081-0x0083]
[ 0.094584] pnp 00:01: [io 0x0087]
[ 0.094586] pnp 00:01: [io 0x0089-0x008b]
[ 0.094589] pnp 00:01: [io 0x008f]
[ 0.094591] pnp 00:01: [io 0x00c0-0x00df]
[ 0.094626] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.094638] pnp 00:02: [io 0x0070-0x0071]
[ 0.094653] pnp 00:02: [irq 8]
[ 0.094691] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.094701] pnp 00:03: [io 0x0061]
[ 0.094736] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.094746] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.094753] pnp 00:04: [irq 13]
[ 0.094788] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.094847] pnp 00:05: [mem 0xfec00000-0xfec00fff]
[ 0.094850] pnp 00:05: [mem 0xfee00000-0xfee00fff]
[ 0.094918] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.094922] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.094926] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.095049] pnp 00:06: [io 0x0010-0x001f]
[ 0.095052] pnp 00:06: [io 0x0022-0x003f]
[ 0.095055] pnp 00:06: [io 0x0062-0x0063]
[ 0.095057] pnp 00:06: [io 0x0065-0x006f]
[ 0.095060] pnp 00:06: [io 0x0072-0x007f]
[ 0.095063] pnp 00:06: [io 0x0080]
[ 0.095065] pnp 00:06: [io 0x0084-0x0086]
[ 0.095068] pnp 00:06: [io 0x0088]
[ 0.095070] pnp 00:06: [io 0x008c-0x008e]
[ 0.095073] pnp 00:06: [io 0x0090-0x009f]
[ 0.095076] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.095078] pnp 00:06: [io 0x00b1]
[ 0.095081] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.095083] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.095086] pnp 00:06: [io 0x040b]
[ 0.095089] pnp 00:06: [io 0x04d6]
[ 0.095091] pnp 00:06: [io 0x0c00-0x0c01]
[ 0.095094] pnp 00:06: [io 0x0c14]
[ 0.095096] pnp 00:06: [io 0x0c50-0x0c51]
[ 0.095099] pnp 00:06: [io 0x0c52]
[ 0.095101] pnp 00:06: [io 0x0c6c]
[ 0.095104] pnp 00:06: [io 0x0c6f]
[ 0.095106] pnp 00:06: [io 0x0cd0-0x0cd1]
[ 0.095109] pnp 00:06: [io 0x0cd2-0x0cd3]
[ 0.095112] pnp 00:06: [io 0x0cd4-0x0cd5]
[ 0.095114] pnp 00:06: [io 0x0cd6-0x0cd7]
[ 0.095117] pnp 00:06: [io 0x0cd8-0x0cdf]
[ 0.095120] pnp 00:06: [io 0x0800-0x089f]
[ 0.095123] pnp 00:06: [io 0x0b10-0x0b1f]
[ 0.095126] pnp 00:06: [io 0x0000-0xffffffff disabled]
[ 0.095129] pnp 00:06: [io 0x0900-0x090f]
[ 0.095131] pnp 00:06: [io 0x0910-0x091f]
[ 0.095134] pnp 00:06: [io 0xfe00-0xfefe]
[ 0.095137] pnp 00:06: [mem 0xffb80000-0xffbfffff]
[ 0.095140] pnp 00:06: [mem 0xfec10000-0xfec1ffff]
[ 0.095143] pnp 00:06: [mem 0xfff00000-0xffffffff]
[ 0.095143] Switched to NOHz mode on CPU #0
[ 0.095143] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.095143] system 00:06: [io 0x040b] has been reserved
[ 0.095143] system 00:06: [io 0x04d6] has been reserved
[ 0.095143] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.095143] system 00:06: [io 0x0c14] has been reserved
[ 0.095143] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.095143] system 00:06: [io 0x0c52] has been reserved
[ 0.095143] system 00:06: [io 0x0c6c] has been reserved
[ 0.095143] system 00:06: [io 0x0c6f] has been reserved
[ 0.095143] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.095143] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.095143] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.095143] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.095143] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.095143] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.095143] system 00:06: [io 0x0b10-0x0b1f] has been reserved
[ 0.095143] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.095143] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.095143] system 00:06: [io 0xfe00-0xfefe] has been reserved
[ 0.095143] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.095143] system 00:06: [mem 0xfec10000-0xfec1ffff] has been reserved
[ 0.095143] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.095143] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.095143] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.095143] pnp 00:07: [irq 4]
[ 0.095143] pnp 00:07: [dma 0 disabled]
[ 0.095143] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.095143] pnp 00:08: [io 0x02f8-0x02ff]
[ 0.095143] pnp 00:08: [irq 3]
[ 0.095143] pnp 00:08: [dma 0 disabled]
[ 0.095143] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.095506] pnp 00:09: [io 0x0378-0x037f]
[ 0.095512] pnp 00:09: [irq 7]
[ 0.095515] pnp 00:09: [dma 0 disabled]
[ 0.095659] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.095765] pnp 00:0a: [io 0x0000-0xffffffff disabled]
[ 0.095768] pnp 00:0a: [io 0x0e80-0x0f5f]
[ 0.095771] pnp 00:0a: [io 0x0f40-0x0f4f]
[ 0.095831] system 00:0a: [io 0x0e80-0x0f5f] has been reserved
[ 0.095835] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
[ 0.095839] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.095870] pnp 00:0b: [io 0x0060]
[ 0.095873] pnp 00:0b: [io 0x0064]
[ 0.095882] pnp 00:0b: [irq 1]
[ 0.095924] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.095975] pnp 00:0c: [irq 12]
[ 0.096027] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.096086] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.096129] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.096178] pnp 00:0e: [mem 0xe0000000-0xefffffff]
[ 0.096232] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.096236] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.096451] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.096455] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[ 0.096458] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[ 0.096461] pnp 00:0f: [mem 0x00100000-0x77ffffff]
[ 0.096463] pnp 00:0f: [mem 0xfed45000-0xffffffff]
[ 0.096527] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.096531] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.096535] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.096539] system 00:0f: [mem 0x00100000-0x77ffffff] could not be reserved
[ 0.096543] system 00:0f: [mem 0xfed45000-0xffffffff] could not be reserved
[ 0.096547] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.096662] pnp: PnP ACPI: found 16 devices
[ 0.096664] ACPI: ACPI bus type pnp unregistered
[ 0.096668] PnPBIOS: Disabled by ACPI PNP
[ 0.133675] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.133680] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.133685] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe6fffff]
[ 0.133690] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.133695] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.133699] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff]
[ 0.133704] pci 0000:00:04.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.133707] pci 0000:00:04.0: bridge window [mem pref disabled]
[ 0.133713] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.133716] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.133721] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.133725] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 0.133731] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.133735] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.133742] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfebfffff]
[ 0.133748] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 0.133767] pci 0000:00:04.0: setting latency timer to 64
[ 0.133774] pci 0000:00:05.0: setting latency timer to 64
[ 0.133784] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.133787] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.133790] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.133794] pci_bus 0000:00: resource 7 [mem 0x78000000-0xdfffffff]
[ 0.133797] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed44fff]
[ 0.133801] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.133804] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe6fffff]
[ 0.133808] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.133811] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.133815] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.133818] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.133822] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.133825] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.133828] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfebfffff]
[ 0.133832] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[ 0.133835] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.133839] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.133842] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.133845] pci_bus 0000:04: resource 7 [mem 0x78000000-0xdfffffff]
[ 0.133849] pci_bus 0000:04: resource 8 [mem 0xf0000000-0xfed44fff]
[ 0.133925] NET: Registered protocol family 2
[ 0.134030] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.134360] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.135030] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.135364] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.135368] TCP reno registered
[ 0.135372] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.135386] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.135621] NET: Registered protocol family 1
[ 0.252057] pci 0000:01:05.0: Boot video device
[ 0.252084] pci 0000:04:01.0: Firmware left e100 interrupts enabled; disabling
[ 0.252091] PCI: CLS 64 bytes, default 64
[ 0.252146] Unpacking initramfs...
[ 0.569271] Freeing initrd memory: 9080k freed
[ 0.575578] audit: initializing netlink socket (disabled)
[ 0.575591] type=2000 audit(1304965796.572:1): initialized
[ 0.586984] highmem bounce pool size: 64 pages
[ 0.586990] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.589251] VFS: Disk quotas dquot_6.5.2
[ 0.589392] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.589552] msgmni has been set to 1733
[ 0.589786] alg: No test for stdrng (krng)
[ 0.589853] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.589857] io scheduler noop registered
[ 0.589859] io scheduler deadline registered
[ 0.589873] io scheduler cfq registered (default)
[ 0.589976] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.590010] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.590070] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.590097] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.590302] ERST: Table is not found!
[ 0.590320] isapnp: Scanning for PnP cards...
[ 0.946943] isapnp: No Plug & Play device found
[ 0.947027] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.967566] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.988100] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.008854] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.029433] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.029800] Linux agpgart interface v0.103
[ 1.030479] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.032762] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.032770] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.032931] mousedev: PS/2 mouse device common for all mice
[ 1.032983] rtc_cmos 00:02: RTC can wake from S4
[ 1.033037] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.033068] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.033083] cpuidle: using governor ladder
[ 1.033086] cpuidle: using governor menu
[ 1.033377] TCP cubic registered
[ 1.033553] NET: Registered protocol family 10
[ 1.034337] Mobile IPv6
[ 1.034340] NET: Registered protocol family 17
[ 1.034345] Registering the dns_resolver key type
[ 1.034371] Using IPI No-Shortcut mode
[ 1.034492] PM: Hibernation image not present or could not be loaded.
[ 1.034503] registered taskstats version 1
[ 1.035128] rtc_cmos 00:02: setting system clock to 2011-05-09 18:29:58 UTC (1304965798)
[ 1.035160] Initalizing network drop monitor service
[ 1.035232] Freeing unused kernel memory: 392k freed
[ 1.035500] Write protecting the kernel text: 2648k
[ 1.035522] Write protecting the kernel read-only data: 1000k
[ 1.060260] <30>udev[46]: starting version 167
[ 1.074858] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.307710] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.307715] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.307782] e100 0000:04:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.433733] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 1.433737] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.433781] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.433803] e1000e 0000:02:00.0: setting latency timer to 64
[ 1.433993] e1000e 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.433997] e1000e 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.434001] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.434170] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 1.436648] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 1.436689] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.436730] r8169 0000:03:00.0: setting latency timer to 64
[ 1.436788] r8169 0000:03:00.0: irq 45 for MSI/MSI-X
[ 1.437388] r8169 0000:03:00.0: eth0: RTL8101e at 0xf8034000, 00:1f:e2:4d:26:2c, XID 94200000 IRQ 45
[ 1.501333] SCSI subsystem initialized
[ 1.585345] usbcore: registered new interface driver usbfs
[ 1.585529] usbcore: registered new interface driver hub
[ 1.585702] usbcore: registered new device driver usb
[ 1.608152] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.608208] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.608233] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.608282] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.608316] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.608333] ehci_hcd 0000:00:13.5: debug port 1
[ 1.608358] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe4ff000
[ 1.616709] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.617528] libata version 3.00 loaded.
[ 1.620051] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.620080] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.620084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.620087] usb usb1: Product: EHCI Host Controller
[ 1.620090] usb usb1: Manufacturer: Linux 2.6.38-2-686 ehci_hcd
[ 1.620093] usb usb1: SerialNumber: 0000:00:13.5
[ 1.620251] hub 1-0:1.0: USB hub found
[ 1.620257] hub 1-0:1.0: 10 ports detected
[ 1.620662] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.620684] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.620703] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.620736] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe4fe000
[ 1.639693] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:2f:17:f6
[ 1.639698] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 1.639712] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-003
[ 1.641392] e100 0000:04:01.0: PME# disabled
[ 1.642180] e100 0000:04:01.0: eth2: addr 0xfebff000, irq 21, MAC addr 00:90:27:7d:4f:c1
[ 1.680047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.680053] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.680056] usb usb2: Product: OHCI Host Controller
[ 1.680059] usb usb2: Manufacturer: Linux 2.6.38-2-686 ohci_hcd
[ 1.680061] usb usb2: SerialNumber: 0000:00:13.0
[ 1.680327] hub 2-0:1.0: USB hub found
[ 1.680339] hub 2-0:1.0: 2 ports detected
[ 1.680448] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.680487] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.681059] scsi0 : pata_atiixp
[ 1.681219] scsi1 : pata_atiixp
[ 1.682078] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.682082] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.682250] ahci 0000:00:12.0: version 3.0
[ 1.682274] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.682306] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.682405] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.682409] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.684376] scsi2 : ahci

[ 1.684635] scsi3 : ahci
[ 1.684756] scsi4 : ahci
[ 1.684877] scsi5 : ahci
[ 1.685024] ata3: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 22
[ 1.685029] ata4: SATA max UDMA/133 abar m1024@0xfe4ff800 port 0xfe4ff980 irq 22
[ 1.685034] ata5: SATA max UDMA/133 abar m1024@0xfe4ff800 port 0xfe4ffa00 irq 22
[ 1.685038] ata6: SATA max UDMA/133 abar m1024@0xfe4ff800 port 0xfe4ffa80 irq 22
[ 1.685231] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.685257] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.685270] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.685305] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe4fd000
[ 1.744043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.744048] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.744051] usb usb3: Product: OHCI Host Controller
[ 1.744054] usb usb3: Manufacturer: Linux 2.6.38-2-686 ohci_hcd
[ 1.744057] usb usb3: SerialNumber: 0000:00:13.1
[ 1.744516] hub 3-0:1.0: USB hub found
[ 1.744529] hub 3-0:1.0: 2 ports detected
[ 1.744639] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.744662] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.744678] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.744709] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe4fc000
[ 1.804037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.804042] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.804045] usb usb4: Product: OHCI Host Controller
[ 1.804048] usb usb4: Manufacturer: Linux 2.6.38-2-686 ohci_hcd
[ 1.804050] usb usb4: SerialNumber: 0000:00:13.2
[ 1.804723] hub 4-0:1.0: USB hub found
[ 1.804737] hub 4-0:1.0: 2 ports detected
[ 1.804840] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.804865] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.804875] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.804897] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe4fb000
[ 1.856478] ata1.00: ATA-4: QUANTUM FIREBALL EL10.2A, A08.1100, max UDMA/33
[ 1.856483] ata1.00: 20044080 sectors, multi 16: LBA
[ 1.856654] ata1.01: ATA-6: ST340015A, 3.15, max UDMA/100
[ 1.856657] ata1.01: 78165360 sectors, multi 16: LBA
[ 1.864204] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

[ 1.864208] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.864211] usb usb5: Product: OHCI Host Controller
[ 1.864214] usb usb5: Manufacturer: Linux 2.6.38-2-686 ohci_hcd
[ 1.864217] usb usb5: SerialNumber: 0000:00:13.3
[ 1.864936] hub 5-0:1.0: USB hub found
[ 1.864949] hub 5-0:1.0: 2 ports detected
[ 1.865055] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.865080] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.865096] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.865118] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe4fa000
[ 1.872442] ata1.00: configured for UDMA/33
[ 1.888606] ata1.01: configured for UDMA/100
[ 1.888753] scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL A08. PQ: 0 ANSI: 5
[ 1.889151] scsi 0:0:1:0: Direct-Access ATA ST340015A 3.15 PQ: 0 ANSI: 5
[ 1.924106] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.924110] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.924114] usb usb6: Product: OHCI Host Controller
[ 1.924116] usb usb6: Manufacturer: Linux 2.6.38-2-686 ohci_hcd
[ 1.924119] usb usb6: SerialNumber: 0000:00:13.4
[ 1.924788] hub 6-0:1.0: USB hub found
[ 1.924801] hub 6-0:1.0: 2 ports detected
[ 2.008040] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.008082] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.008116] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.580023] ata3: softreset failed (device not ready)
[ 2.580067] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.752031] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.756843] ata3.00: ATA-5: QUANTUM FIREBALLP AS60.0, A1Y.1300, max UDMA/100
[ 2.756847] ata3.00: 120478088 sectors, multi 0: LBA
[ 2.756851] ata3.00: applying bridge limits

[ 2.756854] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.761890] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.761893] ata3.00: configured for UDMA/100
[ 2.762037] scsi 2:0:0:0: Direct-Access ATA QUANTUM FIREBALL A1Y. PQ: 0 ANSI: 5
[ 2.789249] sd 0:0:0:0: [sda] 20044080 512-byte logical blocks: (10.2 GB/9.55 GiB)
[ 2.789295] sd 0:0:0:0: [sda] Write Protect is off
[ 2.789299] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.789320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.790141] sd 2:0:0:0: [sdc] 120478088 512-byte logical blocks: (61.6 GB/57.4 GiB)
[ 2.790186] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.790190] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.790209] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.792433] sdc: sdc1
[ 2.792759] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.795327] sd 0:0:1:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 2.795369] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.795373] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.795393] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.795885] sda: sda1
[ 2.811578] sdb: sdb1
[ 2.811899] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.811971] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 3.348270] EXT3-fs: barriers not enabled
[ 3.353732] kjournald starting. Commit interval 5 seconds
[ 3.353760] EXT3-fs (sdb1): mounted filesystem with ordered data mode
[ 6.011527] <30>udev[302]: starting version 167
[ 6.664398] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.728546] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 6.728646] ACPI: Power Button [PWRB]
[ 6.729276] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.729431] ACPI: Power Button [PWRF]
[ 6.739470] ACPI: acpi_idle registered with cpuidle
[ 6.739514] ACPI: duty_cycle spans bit 4
[ 6.745249] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.944515] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.017900] lib80211: common routines for IEEE802.11 drivers
[ 7.017906] lib80211_crypt: registered algorithm 'NULL'
[ 7.116659] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 7.232417] parport_pc 00:09: reported by Plug and Play ACPI
[ 7.232480] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 7.255455] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 7.371075] <30>udev[317]: renamed network interface eth0 to eth0-eth2
[ 7.444140] <30>udev[328]: renamed network interface eth2 to eth2-eth1
[ 7.445087] <30>udev[316]: renamed network interface eth1 to eth3
[ 7.471873] <30>udev[317]: renamed network interface eth0-eth2 to eth2
[ 7.494865] <30>udev[328]: renamed network interface eth2-eth1 to eth1
[ 8.292773] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.337836] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 8.360641] hostap_pci 0000:04:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 8.361493] hostap_pci: Registered netdevice wifi0
[ 8.361503] wifi0: Original COR value: 0x0
[ 8.563103] prism2_hw_init: initialized in 196 ms
[ 8.564357] wifi0: NIC: id=0x8013 v1.0.0
[ 8.564506] wifi0: PRI: id=0x15 v1.0.7
[ 8.564650] wifi0: STA: id=0x1f v1.3.6
[ 8.565721] wifi0: defaulting to host-based encryption as a workaround for firmware bug in Host AP mode WEP
[ 8.565725] wifi0: defaulting to bogus WDS frame as a workaround for firmware bug in Host AP mode WDS
[ 8.567927] wifi0: Intersil Prism2.5 PCI: mem=0xfdfff000, irq=20
[ 8.568843] wifi0: registered netdevice wlan0
[ 8.583747] <30>udev[316]: renamed network interface wlan0 to eth0
[ 8.584977] <30>udev[314]: renamed network interface wifi0 to wifi0-eth0
[ 8.767992] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.768115] HDA Intel 0000:00:14.2: irq 46 for MSI/MSI-X
[ 8.965551] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 8.970272] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 100.102320] EXT3-fs (sdb1): using internal journal
[ 100.279408] loop: module loaded
[ 102.590980] EXT3-fs: barriers not enabled
[ 102.591189] kjournald starting. Commit interval 5 seconds
[ 102.592063] EXT3-fs (sdc1): using internal journal
[ 102.592068] EXT3-fs (sdc1): mounted filesystem with ordered data mode
[ 102.801221] EXT3-fs: barriers not enabled
[ 102.811199] kjournald starting. Commit interval 5 seconds
[ 102.811504] EXT3-fs (sda1): using internal journal
[ 102.811508] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 105.359018] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 105.376089] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 105.789282] lib80211_crypt: registered algorithm 'WEP'
[ 306.880352] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 306.884294] e100 0000:04:01.0: eth1: NIC Link is Up 100 Mbps Full Duplex
[ 306.884612] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 506.428197] r8169 0000:03:00.0: eth2: link down
[ 506.428205] r8169 0000:03:00.0: eth2: link down
[ 506.428452] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 508.008557] r8169 0000:03:00.0: eth2: link up
[ 508.008765] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 570.189148] wifi0-eth0: 88:9f:fa:ff:9e:3c auth_cb - alg=0 trans#=2 status=0 - STA authenticated
[ 570.191130] wifi0-eth0: 88:9f:fa:ff:9e:3c assoc_cb - STA associated
[ 705.924773] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 707.740990] e1000e: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 707.740997] e1000e 0000:02:00.0: eth3: 10/100 speed: disabling TSO
[ 707.741375] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 905.914804] RPC: Registered udp transport module.
[ 905.914809] RPC: Registered tcp transport module.
[ 905.914811] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 905.985637] FS-Cache: Loaded
[ 906.041248] FS-Cache: Netfs 'nfs' registered for caching
[ 906.076791] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 916.528577] svc: failed to register lockdv1 RPC service (errno 97).
[ 938.084938] fuse init (API version 7.16)

Thanks

--
Mike Ricketts <mike@earth.li> http://www.earth.li/~mike/

You will win success in whatever calling you adopt.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: Pine.LNX.4.64.1105100821330.32120@heaven.on.earth. li">http://lists.debian.org/Pine.LNX.4.64.1105100821330.32120@heaven.on.earth. li
 

Thread Tools




All times are GMT. The time now is 02:35 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org