Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#623893: linux-image-2.6.38-2-686 fails to install (http://www.linux-archive.org/debian-kernel/517780-bug-623893-linux-image-2-6-38-2-686-fails-install.html)

Domenico Cufalo 04-24-2011 08:28 AM

Bug#623893: linux-image-2.6.38-2-686 fails to install
 
Package: linux-2.6
Version: 2.6.38-3
Severity: important

New kernel v. 2.6.38-3 fails to install. I have not rebooted my pc!

Here are the errors on the terminal:

domenico@eeepc:~$ sudo aptitude upgrade
Risoluzione delle dipendenze...
I seguenti pacchetti saranno aggiornati:
linux-image-2.6.38-2-686
1 pacchetti aggiornati, 0 installati, 0 da rimuovere e 5 non aggiornati.
necessario prelevare 28,2 MB di archivi. Dopo l'estrazione, verranno
occupati 73,7 kB.
Continuare? [Y/n/?] y
Get:1 http://ftp.de.debian.org/debian/ sid/main linux-image-2.6.38-2-686 i386
2.6.38-4 [28,2 MB]
Scaricato 28,2 MB in 37s (757 kB/s)
Lettura dei campi dei pacchetti... Fatto
Lettura dello stato dei pacchetti... Fatto
Recupero delle segnalazioni di bug... Fatto
Analisi delle informazioni... Fatto
Preconfigurazione dei pacchetti in corso
(Lettura del database... 178936 file e directory attualmente installati.)
Preparativi per sostituire linux-image-2.6.38-2-686 v.2.6.38-3 (utilizzando
..../linux-image-2.6.38-2-686_2.6.38-4_i386.deb)...
Estrazione del sostituto di linux-image-2.6.38-2-686...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.38-2-686
/boot/vmlinuz-2.6.38-2-686
run-parts: executing /etc/kernel/postrm.d/zz-extlinux 2.6.38-2-686
/boot/vmlinuz-2.6.38-2-686
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-2.6.38-2-686.dpkg-tmp...
P: Writing config for /boot/vmlinuz-2.6.38-2-686...
P: Writing config for /boot/vmlinuz-2.6.32-5-686...
P: Updating /boot/extlinux/linux.cfg...
P: Writing config for Microsoft Windows XP Home Edition on /dev/sda1...
P: Writing config for Windows NT/2000/XP on /dev/sda3...
E: /usr/share/syslinux/debian/extlinux: No such file or directory
run-parts: /etc/kernel/postrm.d/zz-extlinux exited with return code 1
Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-
image-2.6.38-2-686.postrm line 235.
dpkg: attenzione: il sottoprocesso vecchio script di post-removal ha restituito
lo stato di errore 1
dpkg - viene provato lo script dal nuovo pacchetto...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.38-2-686
/boot/vmlinuz-2.6.38-2-686
run-parts: executing /etc/kernel/postrm.d/zz-extlinux 2.6.38-2-686
/boot/vmlinuz-2.6.38-2-686
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-2.6.38-2-686.dpkg-tmp...
P: Writing config for /boot/vmlinuz-2.6.38-2-686...
P: Writing config for /boot/vmlinuz-2.6.32-5-686...
P: Writing config for Microsoft Windows XP Home Edition on /dev/sda1...
P: Writing config for Windows NT/2000/XP on /dev/sda3...
E: /usr/share/syslinux/debian/extlinux: No such file or directory
run-parts: /etc/kernel/postrm.d/zz-extlinux exited with return code 1
Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/tmp.ci/postrm line 235.
dpkg: errore nell'elaborare /var/cache/apt/archives/linux-
image-2.6.38-2-686_2.6.38-4_i386.deb (--unpack):
il sottoprocesso nuovo script post-removal ha restituito lo stato di errore 1
configured to not write apport reports
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.38-2-686
/boot/vmlinuz-2.6.38-2-686
run-parts: executing /etc/kernel/postrm.d/zz-extlinux 2.6.38-2-686
/boot/vmlinuz-2.6.38-2-686
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-2.6.38-2-686...
P: Writing config for /boot/vmlinuz-2.6.32-5-686...
P: Updating /boot/extlinux/linux.cfg...
P: Writing config for Microsoft Windows XP Home Edition on /dev/sda1...
P: Writing config for Windows NT/2000/XP on /dev/sda3...
E: /usr/share/syslinux/debian/extlinux: No such file or directory
run-parts: /etc/kernel/postrm.d/zz-extlinux exited with return code 1
Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/tmp.ci/postrm line 235.
dpkg: errore durante la pulizia:
il sottoprocesso nuovo script post-removal ha restituito lo stato di errore 1
Elaborazione dei trigger per readahead-fedora...
Si sono verificati degli errori nell'elaborazione:
/var/cache/apt/archives/linux-image-2.6.38-2-686_2.6.38-4_i386.deb
localepurge: Disk space freed in /usr/share/locale: 0 KiB
localepurge: Disk space freed in /usr/share/man: 0 KiB
localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB
localepurge: Disk space freed in /usr/share/omf: 0 KiB
localepurge: Disk space freed in /usr/share/doc/kde/HTML: 0 KiB

Total disk space freed by localepurge: 0 KiB

E: Sub-process /usr/bin/dpkg returned an error code (1)
Errore durante l'installazione di un pacchetto. Tentativo di ripristino:



-- Package-specific info:
** Version:
Linux version 2.6.38-2-686 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 05:24:21 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=d7ca4739-5c84-4af1-8ed6-423a8891fa17 ro quiet

** Not tainted

** Kernel log:
[ 27.596494] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 27.795490] WARNING! power/level is deprecated; use power/control instead
[ 27.829283] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 27.829605] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 27.911945] Linux video capture interface: v2.00
[ 27.933757] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 27.955431] input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input10
[ 27.956391] usbcore: registered new interface driver uvcvideo
[ 27.956399] USB Video Class driver (v1.0.0)
[ 30.016163] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1 across:2096444k
[ 30.330635] EXT3-fs (sda5): using internal journal
[ 31.285143] EXT3-fs: barriers not enabled
[ 31.286008] kjournald starting. Commit interval 5 seconds
[ 31.286778] EXT3-fs (sda7): using internal journal
[ 31.286792] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 32.090964] RPC: Registered udp transport module.
[ 32.090971] RPC: Registered tcp transport module.
[ 32.090975] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 32.126313] FS-Cache: Loaded
[ 32.174604] FS-Cache: Netfs 'nfs' registered for caching
[ 32.213195] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 33.139171] fuse init (API version 7.16)
[ 34.512170] ATL1E 0000:03:00.0: irq 44 for MSI/MSI-X
[ 34.512913] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.590767] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 34.775407] apm: BIOS not found.
[ 34.995609] Bluetooth: Core ver 2.15
[ 34.995681] NET: Registered protocol family 31
[ 34.995687] Bluetooth: HCI device and connection manager initialized
[ 34.995694] Bluetooth: HCI socket layer initialized
[ 35.034572] Bluetooth: L2CAP ver 2.15
[ 35.034580] Bluetooth: L2CAP socket layer initialized
[ 35.046273] composite sync not supported
[ 35.076441] composite sync not supported
[ 35.086512] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 35.086519] Bluetooth: BNEP filters: protocol multicast
[ 35.087669] Bluetooth: RFCOMM TTY layer initialized
[ 35.087684] Bluetooth: RFCOMM socket layer initialized
[ 35.087690] Bluetooth: RFCOMM ver 1.11
[ 35.151803] Bluetooth: SCO (Voice Link) ver 0.6
[ 35.151811] Bluetooth: SCO socket layer initialized
[ 35.500620] lp: driver loaded but no devices found
[ 35.535668] ppdev: user-space parallel port driver
[ 35.976088] usbcore: deregistering interface driver uvcvideo
[ 36.328008] usb 1-8: USB disconnect, address 2
[ 37.747668] composite sync not supported
[ 37.785056] composite sync not supported
[ 37.832878] composite sync not supported
[ 46.040050] type=1305 audit(1303631065.376:24671): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
[ 46.040064] type=1305 audit(1303631065.376:24672): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
[ 49.955827] composite sync not supported
[ 50.057659] composite sync not supported
[ 50.087524] composite sync not supported
[ 56.052200] composite sync not supported
[ 94.112631] pci 0000:01:00.0: [168c:002a] type 0 class 0x000280
[ 94.112677] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
[ 94.112819] pci 0000:01:00.0: supports D1
[ 94.112825] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 94.112836] pci 0000:01:00.0: PME# disabled
[ 94.112885] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf800ffff 64bit]
[ 94.112905] pci 0000:01:00.0: BAR 0: set to [mem 0xf8000000-0xf800ffff 64bit] (PCI address [0xf8000000-0xf800ffff])
[ 95.493362] cfg80211: Calling CRDA to update world regulatory domain
[ 101.504229] ath9k 0000:01:00.0: enabling device (0000 -> 0002)
[ 101.504252] ath9k 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 101.504277] ath9k 0000:01:00.0: setting latency timer to 64
[ 101.933359] ath: EEPROM regdomain: 0x60
[ 101.933365] ath: EEPROM indicates we should expect a direct regpair map
[ 101.933372] ath: Country alpha2 being used: 00
[ 101.933376] ath: Regpair used: 0x60
[ 102.128333] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 102.130130] Registered led device: ath9k-phy0::radio
[ 102.130226] Registered led device: ath9k-phy0::assoc
[ 102.130314] Registered led device: ath9k-phy0::tx
[ 102.130423] Registered led device: ath9k-phy0::rx
[ 102.130449] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8b40000, irq=19
[ 102.216229] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 105.207967] wlan0: authenticate with 00:25:53:05:da:bc (try 1)
[ 105.209952] wlan0: authenticated
[ 105.227746] wlan0: associate with 00:25:53:05:da:bc (try 1)
[ 105.231394] wlan0: RX AssocResp from 00:25:53:05:da:bc (capab=0x411 status=0 aid=1)
[ 105.231404] wlan0: associated
[ 105.231882] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 115.528046] wlan0: no IPv6 routers present
[ 283.836588] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 283.850111] SGI XFS Quota Management subsystem
[ 283.871159] JFS: nTxBlock = 8192, nTxLock = 65536
[ 283.929031] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 283.978982] QNX4 filesystem 0.2.3 registered.
[ 284.049355] Btrfs loaded
[ 285.228700] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 287.996307] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 292.181592] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 315.703212] <30>udevd[8482]: starting version 168
[ 388.749922] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 390.984907] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 394.615516] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 653.250041] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 656.530031] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 662.320787] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 957.866704] composite sync not supported

** Model information
not available

** Loaded modules:
Module Size Used by
nls_utf8 12416 0
nls_cp437 12417 0
btrfs 419292 0
zlib_deflate 21186 1 btrfs
crc32c 12576 1
libcrc32c 12394 1 btrfs
ufs 60850 0
qnx4 12992 0
hfsplus 70149 0
hfs 44669 0
minix 26769 0
ntfs 165605 0
vfat 16989 0
msdos 12822 0
fat 44149 2 vfat,msdos
jfs 138429 0
xfs 537165 0
reiserfs 178367 0
ext4 251726 0
jbd2 55701 1 ext4
ext2 53488 0
arc4 12418 2
ecb 12649 2
ath9k 71303 0
mac80211 160285 1 ath9k
ath9k_common 12613 1 ath9k
ath9k_hw 245846 2 ath9k,ath9k_common
ath 17021 2 ath9k,ath9k_hw
cfg80211 106889 3 ath9k,mac80211,ath
acpi_cpufreq 12737 0
mperf 12387 1 acpi_cpufreq
parport_pc 21895 0
ppdev 12621 0
cpufreq_conservative 13598 0
lp 12858 0
parport 27018 3 parport_pc,ppdev,lp
cpufreq_powersave 12422 0
cpufreq_userspace 12520 0
cpufreq_stats 12670 0
sco 13219 2
bnep 17147 2
rfcomm 31960 0
l2cap 35435 6 bnep,rfcomm
crc16 12327 2 ext4,l2cap
bluetooth 50119 6 sco,bnep,rfcomm,l2cap
uinput 12984 1
fuse 55640 3
nfsd 196206 2
exportfs 12527 2 xfs,nfsd
nfs 214151 0
lockd 60890 2 nfsd,nfs
fscache 31438 1 nfs
nfs_acl 12463 2 nfsd,nfs
auth_rpcgss 31739 2 nfsd,nfs
sunrpc 136969 6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
joydev 16906 0
snd_hda_codec_realtek 207804 1
snd_hda_intel 21529 2
snd_hda_codec 57563 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 12906 1 snd_hda_codec
snd_pcm 52774 2 snd_hda_intel,snd_hda_codec
snd_seq 39172 0
snd_timer 22171 2 snd_pcm,snd_seq
snd_seq_device 12995 1 snd_seq
battery 12926 0
ac 12552 0
power_supply 13283 2 battery,ac
eeepc_laptop 18262 0
sparse_keymap 12680 1 eeepc_laptop
rfkill 18510 5 cfg80211,bluetooth,eeepc_laptop
pci_hotplug 26303 1 eeepc_laptop
snd 38153 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec, snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
processor 26983 3 acpi_cpufreq
i915 276436 2
psmouse 45863 0
tpm_tis 12949 0
drm_kms_helper 26501 1 i915
tpm 17454 1 tpm_tis
tpm_bios 12799 1 tpm
serio_raw 12758 0
drm 128416 3 i915,drm_kms_helper
i2c_algo_bit 12706 1 i915
button 12866 1 i915
i2c_core 18989 4 i915,drm_kms_helper,drm,i2c_algo_bit
evdev 13084 17
soundcore 12878 1 snd
video 17345 1 i915
rng_core 12550 0
snd_page_alloc 12841 2 snd_hda_intel,snd_pcm
ext3 98001 2
jbd 40818 1 ext3
mbcache 12810 3 ext4,ext2,ext3
sd_mod 34941 4
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
uhci_hcd 21850 0
ata_piix 21079 3
libata 131904 2 ata_generic,ata_piix
ehci_hcd 34889 0
scsi_mod 134369 2 sd_mod,libata
usbcore 99058 3 uhci_hcd,ehci_hcd
atl1e 26886 0
thermal 13058 0
thermal_sys 17667 3 processor,video,thermal
nls_base 12649 9 nls_utf8,nls_cp437,hfsplus,hfs,ntfs,vfat,fat,jfs,u sbcore

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
# allow-hotplug eth0
# iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:24:8c:71:f5:bb brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:22:43:85:05:c5 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.38/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::222:43ff:fe85:5c5/64 scope link
valid_lft forever preferred_lft forever

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 5204 71 0 0 0 0 0 0 5204 71 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
wlan0: 74717259 53656 0 0 0 0 0 0 3361988 30645 0 0 0 0 0 0

*** Protocol statistics:
Ip:
52730 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
52728 incoming packets delivered
30048 requests sent out
24 outgoing packets dropped
1 dropped because of missing route
Icmp:
24 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 24
31 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 31
IcmpMsg:
InType3: 24
OutType3: 31
Tcp:
335 active connections openings
2 passive connection openings
5 failed connection attempts
10 connection resets received
6 connections established
51927 segments received
29353 segments send out
33 segments retransmited
0 bad segments received.
35 resets sent
Udp:
577 packets received
31 packets to unknown port received.
0 packet receive errors
616 packets sent
UdpLite:
TcpExt:
7 packets pruned from receive queue because of socket buffer overrun
136 TCP sockets finished time wait in fast timer
322 delayed acks sent
46360 packet headers predicted
588 acknowledgments not containing data payload received
55 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
33 other TCP timeouts
1208 packets collapsed in receive queue due to low socket buffer
2 DSACKs received
15 connections reset due to unexpected data
4 connections reset due to early user close
TCPDSACKIgnoredOld: 2
IpExt:
InMcastPkts: 66
OutMcastPkts: 45
InBcastPkts: 139
InOctets: 73925221
OutOctets: 2363217
InMcastOctets: 7601
OutMcastOctets: 4598
InBcastOctets: 20148

*** Device features:
eth0: 0x11989
lo: 0x13865
wlan0: 0x2000

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:834a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 7f800000-7f9fffff
Prefetchable memory behind bridge: 000000007fa00000-000000007fbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 000000007fc00000-000000007fdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

01:00.0 Network controller [0280]: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
Subsystem: AzureWave Device [1a3b:1067]
Physical Slot: eeepc-wifi
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k

03:00.0 Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.38-2-686 (SMP w/2 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.38-2-686 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.38-2-686 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.38-2-686 suggests:
ii extlinux 2:4.03+dfsg-12 collection of boot loaders (ext2/3
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)

Versions of packages linux-image-2.6.38-2-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.38-2-686/postinst/depmod-error-initrd-2.6.38-2-686: false
linux-image-2.6.38-2-686/postinst/ignoring-do-bootloader-2.6.38-2-686:
linux-image-2.6.38-2-686/prerm/removing-running-kernel-2.6.38-2-686: true
linux-image-2.6.38-2-686/postinst/missing-firmware-2.6.38-2-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110424082829.1041.46339.reportbug@eeepc">http://lists.debian.org/20110424082829.1041.46339.reportbug@eeepc


All times are GMT. The time now is 01:05 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.