-- Package-specific info:
** Version:
Linux version 2.6.38-2-amd64 (Debian 2.6.38-2) (ben@decadent.org.uk)
(gcc version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Tue Mar 29 16:45:36 UTC 2011
[ 2.677236] sd 0:0:0:0: [sda] Write Protect is off
[ 2.677238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.677253] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.677701] usbcore: registered new interface driver usb-storage
[ 2.677702] USB Mass Storage support registered.
[ 2.683300] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 2.683302] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.683371] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.696804] sda: sda1 sda2 sda3
[ 2.697050] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.700257] input: PS/2+USB Mouse as
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input0
[ 2.700315] generic-usb 0003:1267:0210.0001: input,hidraw0: USB HID
v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-1/input0
[ 2.700739] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.700816] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.733109] usb 8-1: New USB device found, idVendor=0c45, idProduct=6027
[ 2.733111] usb 8-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 2.733113] usb 8-1: Product: USB camera
[ 2.736109] input: CHESEN USB Keyboard as
/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input1
[ 2.736149] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID
v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 2.763138] input: CHESEN USB Keyboard as
/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input2
[ 2.763181] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID
v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.1-2/input1
[ 2.763197] usbcore: registered new interface driver usbhid
[ 2.763199] usbhid: USB HID core driver
[ 3.015032] PM: Starting manual resume from disk
[ 3.015034] PM: Hibernation image partition 8:1 present
[ 3.015035] PM: Looking for hibernation image.
[ 3.015180] PM: Image not found (code -22)
[ 3.015183] PM: Hibernation image not present or could not be loaded.
[ 3.049845] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 3.682666] scsi 4:0:0:0: Direct-Access Generic- Compact Flash
1.00 PQ: 0 ANSI: 0 CCS
[ 3.689159] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture
1.00 PQ: 0 ANSI: 0 CCS
[ 3.695786] scsi 4:0:0:2: Direct-Access Generic- SD/MMC
1.00 PQ: 0 ANSI: 0 CCS
[ 3.702410] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro
1.00 PQ: 0 ANSI: 0 CCS
[ 3.702717] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.702836] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 3.702938] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 3.703042] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 3.709769] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 3.710526] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.711270] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 3.712027] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 4.312928] udev[367]: starting version 166
[ 4.817976] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.891041] ACPI: acpi_idle registered with cpuidle
[ 4.892340] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input4
[ 4.910717] Monitor-Mwait will be used to enter C-1 state
[ 4.910731] Monitor-Mwait will be used to enter C-2 state
[ 4.910735] Marking TSC unstable due to TSC halts in idle
[ 4.910903] Switching to clocksource hpet
[ 4.912987] wmi: Mapper loaded
[ 4.916409] ACPI: Power Button [PWRB]
[ 4.916454] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.416202] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 8.472075] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 8.472356] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.570504] fuse init (API version 7.16)
[ 11.744896] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 11.745106] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.040301] lp: driver loaded but no devices found
[ 16.097666] ppdev: user-space parallel port driver
[ 22.520025] eth0: no IPv6 routers present
[ 31.780064] start_kdeinit (2064): /proc/2066/oom_adj is deprecated,
please use /proc/2066/oom_score_adj instead.
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1c70 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at 1c88 [disabled] [size=8]
Region 1: I/O ports at 1c7c [disabled] [size=4]
Region 2: I/O ports at 1c80 [disabled] [size=8]
Region 3: I/O ports at 1c78 [disabled] [size=4]
Region 4: I/O ports at 1c20 [disabled] [size=16]
Capabilities: <access denied>
00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset
Serial KT Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1c90 [size=8]
Region 1: Memory at fc526000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fc500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fc527000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10
Family) USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc528000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc529000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1c40 [size=16]
Region 5: I/O ports at 1c30 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fc52a000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10
Family) 2-port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85
[Master SecO PriO])
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 1cc0 [size=8]
Region 1: I/O ports at 1cb4 [size=4]
Region 2: I/O ports at 1cb8 [size=8]
Region 3: I/O ports at 1cb0 [size=4]
Region 4: I/O ports at 1c60 [size=16]
Region 5: I/O ports at 1c50 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. Card Reader
Bus 007 Device 002: ID 1267:0210 Logic3 / SpectraVideo plc Bus 007
Device 003: ID 0a81:0101 Chesen Electronics Corp. Keyboard
Bus 008 Device 002: ID 0c45:6027 Microdia
*** /tmp/reportbug-linux-image-2.6.38-2-amd64-20110404-2735-3OIw6m
Subject: Bug when listing files/dirs on ncpfs
Package: linux-2.6
Version: 2.6.38-2
Severity: grave
Got a bug message when listing items on ncpfs filesystem with 'ls' command.
Makes mounted filesystem useless.
Trace:
-- Package-specific info:
** Version:
Linux version 2.6.38-2-amd64 (Debian 2.6.38-2) (ben@decadent.org.uk)
(gcc version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Tue Mar 29 16:45:36 UTC 2011
[ 2.677236] sd 0:0:0:0: [sda] Write Protect is off
[ 2.677238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.677253] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.677701] usbcore: registered new interface driver usb-storage
[ 2.677702] USB Mass Storage support registered.
[ 2.683300] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 2.683302] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.683371] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.696804] sda: sda1 sda2 sda3
[ 2.697050] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.700257] input: PS/2+USB Mouse as
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input0
[ 2.700315] generic-usb 0003:1267:0210.0001: input,hidraw0: USB HID
v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-1/input0
[ 2.700739] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.700816] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.733109] usb 8-1: New USB device found, idVendor=0c45, idProduct=6027
[ 2.733111] usb 8-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 2.733113] usb 8-1: Product: USB camera
[ 2.736109] input: CHESEN USB Keyboard as
/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input1
[ 2.736149] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID
v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 2.763138] input: CHESEN USB Keyboard as
/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input2
[ 2.763181] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID
v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.1-2/input1
[ 2.763197] usbcore: registered new interface driver usbhid
[ 2.763199] usbhid: USB HID core driver
[ 3.015032] PM: Starting manual resume from disk
[ 3.015034] PM: Hibernation image partition 8:1 present
[ 3.015035] PM: Looking for hibernation image.
[ 3.015180] PM: Image not found (code -22)
[ 3.015183] PM: Hibernation image not present or could not be loaded.
[ 3.049845] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 3.682666] scsi 4:0:0:0: Direct-Access Generic- Compact Flash
1.00 PQ: 0 ANSI: 0 CCS
[ 3.689159] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture
1.00 PQ: 0 ANSI: 0 CCS
[ 3.695786] scsi 4:0:0:2: Direct-Access Generic- SD/MMC
1.00 PQ: 0 ANSI: 0 CCS
[ 3.702410] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro
1.00 PQ: 0 ANSI: 0 CCS
[ 3.702717] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.702836] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 3.702938] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 3.703042] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 3.709769] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 3.710526] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.711270] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 3.712027] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 4.312928] udev[367]: starting version 166
[ 4.817976] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.891041] ACPI: acpi_idle registered with cpuidle
[ 4.892340] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input4
[ 4.910717] Monitor-Mwait will be used to enter C-1 state
[ 4.910731] Monitor-Mwait will be used to enter C-2 state
[ 4.910735] Marking TSC unstable due to TSC halts in idle
[ 4.910903] Switching to clocksource hpet
[ 4.912987] wmi: Mapper loaded
[ 4.916409] ACPI: Power Button [PWRB]
[ 4.916454] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.416202] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 8.472075] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 8.472356] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.570504] fuse init (API version 7.16)
[ 11.744896] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 11.745106] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.040301] lp: driver loaded but no devices found
[ 16.097666] ppdev: user-space parallel port driver
[ 22.520025] eth0: no IPv6 routers present
[ 31.780064] start_kdeinit (2064): /proc/2066/oom_adj is deprecated,
please use /proc/2066/oom_score_adj instead.
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1c70 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at 1c88 [disabled] [size=8]
Region 1: I/O ports at 1c7c [disabled] [size=4]
Region 2: I/O ports at 1c80 [disabled] [size=8]
Region 3: I/O ports at 1c78 [disabled] [size=4]
Region 4: I/O ports at 1c20 [disabled] [size=16]
Capabilities: <access denied>
00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset
Serial KT Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1c90 [size=8]
Region 1: Memory at fc526000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fc500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fc527000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10
Family) USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc528000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc529000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1c40 [size=16]
Region 5: I/O ports at 1c30 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fc52a000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10
Family) 2-port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85
[Master SecO PriO])
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 1cc0 [size=8]
Region 1: I/O ports at 1cb4 [size=4]
Region 2: I/O ports at 1cb8 [size=8]
Region 3: I/O ports at 1cb0 [size=4]
Region 4: I/O ports at 1c60 [size=16]
Region 5: I/O ports at 1c50 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. Card Reader
Bus 007 Device 002: ID 1267:0210 Logic3 / SpectraVideo plc Bus 007
Device 003: ID 0a81:0101 Chesen Electronics Corp. Keyboard
Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=pt_BR.UTF-8, LC_CTYPE=pt_BR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an
initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various
driver
Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii grub-pc 1.99~rc1-8 GRand Unified Bootloader,
version pn linux-doc-2.6.38 <none> (no description
available)
Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=pt_BR.UTF-8, LC_CTYPE=pt_BR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an
initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various
driver
Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii grub-pc 1.99~rc1-8 GRand Unified Bootloader,
version pn linux-doc-2.6.38 <none> (no description
available)
Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic
> Got a bug message when listing items on ncpfs filesystem with 'ls'
> command.
This might have been fixed by v2.6.39-rc4~24 (vfs: fix incorrect
dentry_update_name_case() BUG_ON() test, 2011-04-15). Could you try
the latest version from sid and report the result upstream at [1]?
Thanks and sorry for the trouble,
Jonathan
--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110805183139.GA18325@elie.gateway.2wire.net">htt p://lists.debian.org/20110805183139.GA18325@elie.gateway.2wire.net