FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 03-27-2011, 09:25 AM
Kolja Brix
 
Default Bug#619805: "No irq handler for vector (irq -1)" after suspend-to-disk

Package: linux-2.6
Version: 2.6.32-31
Severity: important

--- Please enter the report below this line. ---

Since the last kernel update in Debian Squeeze, the following bug occurs:

After a suspend-to-disk operation, the kernel every 5 minutes reports the
following error:

kernel:[34668.309779] do_IRQ: 0.74 No irq handler for vector (irq -1)

The error does not occur, when the system is freshly rebooted until the first
suspend-to-disk. Neither did this error occur before the last update of the
kernel package.


--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.32-5-amd64

Debian Release: 6.0.1
500 stable www.debian-multimedia.org
500 stable security.debian.org
500 stable debian.netcologne.de

--- Package information. ---
Package's Depends field is empty.

Package's Recommends field is empty.

Package's Suggests field is empty.






--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201103271125.55501.kolja.brix@rwth-aachen.de">http://lists.debian.org/201103271125.55501.kolja.brix@rwth-aachen.de
 
Old 03-27-2011, 02:54 PM
Ben Hutchings
 
Default Bug#619805: "No irq handler for vector (irq -1)" after suspend-to-disk

On Sun, 2011-03-27 at 11:25 +0200, Kolja Brix wrote:
> Package: linux-2.6
> Version: 2.6.32-31
> Severity: important
>
> --- Please enter the report below this line. ---
>
> Since the last kernel update in Debian Squeeze, the following bug occurs:
>
> After a suspend-to-disk operation, the kernel every 5 minutes reports the
> following error:
>
> kernel:[34668.309779] do_IRQ: 0.74 No irq handler for vector (irq -1)

Send a full log, please.

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.
 
Old 03-27-2011, 03:18 PM
Ben Hutchings
 
Default Bug#619805: "No irq handler for vector (irq -1)" after suspend-to-disk

On Sun, 2011-03-27 at 17:09 +0200, Kolja Brix wrote:
> Dear Ben,
>
> On 27.03.11 16:54 Ben Hutchings wrote:
>
> >> After a suspend-to-disk operation, the kernel every 5 minutes reports the
> >> following error:
> >> kernel:[34668.309779] do_IRQ: 0.74 No irq handler for vector (irq -1)
>
> > Send a full log, please.
>
> of course I will send you all data that you need. But what does "full
> log" mean in this case? What files do you need?

Output of the 'dmesg' command.

The output of 'lspci -vnn' may also be helpful.

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.
 
Old 04-04-2011, 01:51 AM
Ben Hutchings
 
Default Bug#619805: "No irq handler for vector (irq -1)" after suspend-to-disk

-------- Forwarded Message --------
From: Kolja Brix <kolja.brix@rwth-aachen.de>
To: Ben Hutchings <ben@decadent.org.uk>
Subject: Re: Bug#619805: [linux-2.6] "No irq handler for vector (irq -1)" after suspend-to-disk
Date: Sun, 3 Apr 2011 10:04:25 +0200

Dear Ben,

On Sunday, 2011-04-03, 05:16:43 you wrote:

> > here you are. I freshly rebooted the machine, then invoked suspend-to-disk
> > and started the machine again from the disk image:

> This is strange. The error message refers to vector 74, but nothing
> appears to have ever used that IRQ.
>
> This could be due to a bug in the implementation of MSI (Message
> Signalled Interrupts) in hardware or possibly a driver. Please test
> whether the error messages still appear if you use the kernel parameter
> 'pci=nomsi'.

yes. I have repeated exactly the same experiment, the logs are enclosed. The
error messages still appear.

--
Sincerely yours

Kolja

00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Flags: fast devsel
Capabilities: [40] #00 [0000]

00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f4000000-f7cfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Capabilities: [90] Express Root Port (Slot+), MSI 00
Capabilities: [e0] Power Management version 3
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Access Control Services
Capabilities: [160] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Kernel driver in use: pcieport

00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
Subsystem: Device [0043:0083]
Flags: fast devsel
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Vendor Specific Information: ID=0000 Rev=0 Len=000 <?>

00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
Subsystem: Device [0043:0083]
Flags: fast devsel
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Vendor Specific Information: ID=0000 Rev=0 Len=000 <?>

00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
Subsystem: Device [0043:0083]
Flags: fast devsel
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Vendor Specific Information: ID=0000 Rev=0 Len=000 <?>

00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
Flags: fast devsel

00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
Flags: fast devsel

00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
Flags: fast devsel

00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at f3ffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8375]
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at f3ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0000000-f01fffff
Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0400000-f05fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0800000-f09fffff
Prefetchable memory behind bridge: 00000000f0a00000-00000000f0bfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport

00:1c.6 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 [8086:3b4e] (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7e00000-f7efffff
Prefetchable memory behind bridge: 00000000f0c00000-00000000f0dfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport

00:1c.7 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 [8086:3b50] (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f7d00000-f7dfffff
Prefetchable memory behind bridge: 00000000f2e00000-00000000f2efffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f3ffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7f00000-f7ffffff
Prefetchable memory behind bridge: 00000000f2f00000-00000000f2ffffff
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device [1043:8383]

00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b02] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=10 <?>

00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b20] (rev 06) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 21
I/O ports at 9c00 [size=8]
I/O ports at 9880 [size=4]
I/O ports at 9800 [size=8]
I/O ports at 9480 [size=4]
I/O ports at 9400 [size=16]
I/O ports at 9080 [size=16]
Capabilities: [70] Power Management version 3
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Flags: medium devsel, IRQ 18
Memory at f3ffc000 (64-bit, non-prefetchable) [size=256]
I/O ports at ffe0 [size=32]
Kernel driver in use: i801_smbus

00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller [8086:3b26] (rev 06) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 21
I/O ports at ac00 [size=8]
I/O ports at a880 [size=4]
I/O ports at a800 [size=8]
I/O ports at a480 [size=4]
I/O ports at a400 [size=16]
I/O ports at a080 [size=16]
Capabilities: [70] Power Management version 3
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ata_piix

01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9500 GT] [10de:0640] (rev a1) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device [10b0:0401]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at bc00 [size=128]
Expansion ROM at f7c80000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nouveau

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:83a3]
Flags: bus master, fast devsel, latency 0, IRQ 19
I/O ports at c800 [size=256]
Memory at f2eff000 (64-bit, prefetchable) [size=4K]
Memory at f2ef8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at f7df0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Capabilities: [cc] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: r8169

03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at f7efe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint, MSI 01
Kernel driver in use: ahci

03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Flags: bus master, fast devsel, latency 0, IRQ 19
I/O ports at dc00 [size=8]
I/O ports at d880 [size=4]
I/O ports at d800 [size=8]
I/O ports at d480 [size=4]
I/O ports at d400 [size=16]
Capabilities: [68] Power Management version 2
Kernel driver in use: pata_jmicron

07:01.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at f2ffe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Kernel driver in use: bttv

07:01.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at f2fff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

07:04.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at f7fff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at ec00 [size=128]
Capabilities: [50] Power Management version 2
Kernel driver in use: firewire_ohci

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 7 21:35:22 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=43862f53-1c75-46c4-98ce-5b795efbb5a9 ro quiet pci=nomsi
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe70000 (usable)
[ 0.000000] BIOS-e820: 00000000dfe70000 - 00000000dfe88000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfe88000 - 00000000dfedc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfedc000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfe70 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfe70000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfe70000 page 4k
[ 0.000000] kernel direct mapping tables up to dfe70000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] 0100000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ 14000-1e000
[ 0.000000] RAMDISK: 3772b000 - 37fef96f
[ 0.000000] ACPI: RSDP 00000000000fb970 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000dfe70000 00044 (v01 072210 RSDT1251 20100722 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dfe70200 00084 (v01 072210 FACP1251 20100722 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dfe704a0 0EEF8 (v01 A1326 A1326001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000dfe88000 00040
[ 0.000000] ACPI: APIC 00000000dfe70390 000CC (v01 072210 APIC1251 20100722 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dfe70460 0003C (v01 072210 OEMMCFG 20100722 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dfe88040 00072 (v01 072210 OEMB1251 20100722 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dfe7f3a0 00038 (v01 072210 OEMHPET 20100722 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000dfe7f640 00034 (v06 072210 PerfTune 20100722 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000dfe7f680 000B0 (v01 072210 OEMOSFR 20100722 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000dfe897e0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [0000000000019000 - 0000000000020fff]
[ 0.000000] bootmap [0000000000021000 - 0000000000064fff] pages 44
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0220000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a454] TEXT DATA BSS ==> [0001000000 - 000168a454]
[ 0.000000] #3 [003772b000 - 0037fef96f] RAMDISK ==> [003772b000 - 0037fef96f]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b2bc] BRK ==> [000168b000 - 000168b2bc]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000019000] PGTABLE ==> [0000014000 - 0000019000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880001800000-ffff8800089fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfe70
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 2096639
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3819 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898728 pages, LIFO batch:31
[ 0.000000] Normal zone: 16128 pages used for memmap
[ 0.000000] Normal zone: 1163520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfe70000 - 00000000dfe88000
[ 0.000000] PM: Registered nosave memory: 00000000dfe88000 - 00000000dfedc000
[ 0.000000] PM: Registered nosave memory: 00000000dfedc000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008c00000 s90328 r8192 d24360 u131072
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066067
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=43862f53-1c75-46c4-98ce-5b795efbb5a9 ro quiet pci=nomsi
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880008dfe000 - ffff88000cdfe000
[ 0.000000] software IO TLB at phys 0x8dfe000 - 0xcdfe000
[ 0.000000] Memory: 8185824k/8912896k available (3080k kernel code, 526340k absent, 200732k reserved, 1891k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:536
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2808.556 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5617.11 BogoMIPS (lpj=11234224)
[ 0.000015] Security Framework initialized
[ 0.000018] SELinux: Disabled at boot.
[ 0.000456] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001859] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002485] Mount-cache hash table entries: 256
[ 0.002577] Initializing cgroup subsys ns
[ 0.002579] Initializing cgroup subsys cpuacct
[ 0.002583] Initializing cgroup subsys devices
[ 0.002585] Initializing cgroup subsys freezer
[ 0.002586] Initializing cgroup subsys net_cls
[ 0.002600] CPU: Physical Processor ID: 0
[ 0.002601] CPU: Processor Core ID: 0
[ 0.002603] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002605] CPU: L2 cache: 256K
[ 0.002606] CPU: L3 cache: 8192K
[ 0.002608] CPU 0/0x0 -> Node 0
[ 0.002610] mce: CPU supports 9 MCE banks
[ 0.002618] CPU0: Thermal monitoring enabled (TM1)
[ 0.002621] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 0.002627] using mwait in idle threads.
[ 0.002628] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.002632] ... version: 3
[ 0.002633] ... bit width: 48
[ 0.002634] ... generic registers: 4
[ 0.002635] ... value mask: 0000ffffffffffff
[ 0.002636] ... max period: 000000007fffffff
[ 0.002637] ... fixed-purpose events: 3
[ 0.002638] ... event mask: 000000070000000f
[ 0.003283] ACPI: Core revision 20090903
[ 0.116187] Setting APIC routing to physical flat
[ 0.116513] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.156134] CPU0: Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz stepping 05
[ 0.260263] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.270677] Initializing CPU#1
[ 0.348042] CPU: Physical Processor ID: 0
[ 0.348043] CPU: Processor Core ID: 1
[ 0.348045] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.348046] CPU: L2 cache: 256K
[ 0.348047] CPU: L3 cache: 8192K
[ 0.348049] CPU 1/0x2 -> Node 0
[ 0.348058] CPU1: Thermal monitoring enabled (TM1)
[ 0.348060] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.348152] CPU1: Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz stepping 05
[ 0.348158] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.368189] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.378451] Initializing CPU#2
[ 0.455864] CPU: Physical Processor ID: 0
[ 0.455864] CPU: Processor Core ID: 2
[ 0.455866] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.455868] CPU: L2 cache: 256K
[ 0.455868] CPU: L3 cache: 8192K
[ 0.455870] CPU 2/0x4 -> Node 0
[ 0.455879] CPU2: Thermal monitoring enabled (TM1)
[ 0.455882] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.455978] CPU2: Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz stepping 05
[ 0.455984] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.476013] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.486275] Initializing CPU#3
[ 0.563685] CPU: Physical Processor ID: 0
[ 0.563686] CPU: Processor Core ID: 3
[ 0.563688] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.563689] CPU: L2 cache: 256K
[ 0.563690] CPU: L3 cache: 8192K
[ 0.563692] CPU 3/0x6 -> Node 0
[ 0.563701] CPU3: Thermal monitoring enabled (TM1)
[ 0.563703] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.563801] CPU3: Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz stepping 05
[ 0.563807] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.583789] Brought up 4 CPUs
[ 0.583790] Total of 4 processors activated (22468.49 BogoMIPS).
[ 0.584984] CPU0 attaching sched-domain:
[ 0.584986] domain 0: span 0-3 level MC
[ 0.584988] groups: 0 1 2 3
[ 0.584993] CPU1 attaching sched-domain:
[ 0.584994] domain 0: span 0-3 level MC
[ 0.584995] groups: 1 2 3 0
[ 0.584999] CPU2 attaching sched-domain:
[ 0.585000] domain 0: span 0-3 level MC
[ 0.585001] groups: 2 3 0 1
[ 0.585004] CPU3 attaching sched-domain:
[ 0.585006] domain 0: span 0-3 level MC
[ 0.585007] groups: 3 0 1 2
[ 0.585181] devtmpfs: initialized
[ 0.588433] regulator: core version 0.5
[ 0.588470] NET: Registered protocol family 16
[ 0.588529] ACPI: bus type pci registered
[ 0.588580] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.588581] PCI: Not using MMCONFIG.
[ 0.588582] PCI: Using configuration type 1 for base access
[ 0.588950] bio: create slab <bio-0> at 0
[ 0.589609] ACPI: EC: Look up EC in DSDT
[ 0.590654] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.603604] ACPI: Interpreter enabled
[ 0.603606] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.603626] ACPI: Using IOAPIC for interrupt routing
[ 0.603667] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.606397] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
[ 0.607631] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.615617] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.615680] ACPI Warning: Incorrect checksum in table [OEMB] - CE, should be CD (20090903/tbutils-314)
[ 0.615804] ACPI: No dock devices found.
[ 0.616068] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.616163] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.616166] pci 0000:00:03.0: PME# disabled
[ 0.616398] pci 0000:00:1a.0: reg 10 32bit mmio: [0xf3ffe000-0xf3ffe3ff]
[ 0.616445] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.616449] pci 0000:00:1a.0: PME# disabled
[ 0.616483] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3ff8000-0xf3ffbfff]
[ 0.616517] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.616520] pci 0000:00:1b.0: PME# disabled
[ 0.616573] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.616576] pci 0000:00:1c.0: PME# disabled
[ 0.616632] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.616635] pci 0000:00:1c.4: PME# disabled
[ 0.616687] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.616690] pci 0000:00:1c.5: PME# disabled
[ 0.616743] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.616746] pci 0000:00:1c.6: PME# disabled
[ 0.616799] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.616802] pci 0000:00:1c.7: PME# disabled
[ 0.616846] pci 0000:00:1d.0: reg 10 32bit mmio: [0xf3ffd000-0xf3ffd3ff]
[ 0.616893] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.616896] pci 0000:00:1d.0: PME# disabled
[ 0.617046] pci 0000:00:1f.2: reg 10 io port: [0x9c00-0x9c07]
[ 0.617051] pci 0000:00:1f.2: reg 14 io port: [0x9880-0x9883]
[ 0.617055] pci 0000:00:1f.2: reg 18 io port: [0x9800-0x9807]
[ 0.617059] pci 0000:00:1f.2: reg 1c io port: [0x9480-0x9483]
[ 0.617064] pci 0000:00:1f.2: reg 20 io port: [0x9400-0x940f]
[ 0.617068] pci 0000:00:1f.2: reg 24 io port: [0x9080-0x908f]
[ 0.617106] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf3ffc000-0xf3ffc0ff]
[ 0.617117] pci 0000:00:1f.3: reg 20 io port: [0xffe0-0xffff]
[ 0.617153] pci 0000:00:1f.5: reg 10 io port: [0xac00-0xac07]
[ 0.617158] pci 0000:00:1f.5: reg 14 io port: [0xa880-0xa883]
[ 0.617162] pci 0000:00:1f.5: reg 18 io port: [0xa800-0xa807]
[ 0.617167] pci 0000:00:1f.5: reg 1c io port: [0xa480-0xa483]
[ 0.617171] pci 0000:00:1f.5: reg 20 io port: [0xa400-0xa40f]
[ 0.617175] pci 0000:00:1f.5: reg 24 io port: [0xa080-0xa08f]
[ 0.617224] pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
[ 0.617231] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.617238] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf4000000-0xf5ffffff]
[ 0.617242] pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f]
[ 0.617247] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf7c80000-0xf7cfffff]
[ 0.623650] pci 0000:00:03.0: bridge io port: [0xb000-0xbfff]
[ 0.623655] pci 0000:00:03.0: bridge 32bit mmio: [0xf4000000-0xf7cfffff]
[ 0.623662] pci 0000:00:03.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.623854] pci 0000:03:00.0: reg 24 32bit mmio: [0xf7efe000-0xf7efffff]
[ 0.623890] pci 0000:03:00.0: PME# supported from D3hot
[ 0.623894] pci 0000:03:00.0: PME# disabled
[ 0.623943] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07]
[ 0.623951] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883]
[ 0.623958] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807]
[ 0.623966] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483]
[ 0.623974] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f]
[ 0.624038] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.624099] pci 0000:00:1c.6: bridge io port: [0xd000-0xdfff]
[ 0.624102] pci 0000:00:1c.6: bridge 32bit mmio: [0xf7e00000-0xf7efffff]
[ 0.624146] pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.624164] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xf2eff000-0xf2efffff]
[ 0.624176] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xf2ef8000-0xf2efbfff]
[ 0.624183] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xf7df0000-0xf7dfffff]
[ 0.624219] pci 0000:02:00.0: supports D1 D2
[ 0.624220] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.624224] pci 0000:02:00.0: PME# disabled
[ 0.631664] pci 0000:00:1c.7: bridge io port: [0xc000-0xcfff]
[ 0.631667] pci 0000:00:1c.7: bridge 32bit mmio: [0xf7d00000-0xf7dfffff]
[ 0.631671] pci 0000:00:1c.7: bridge 64bit mmio pref: [0xf2e00000-0xf2efffff]
[ 0.631707] pci 0000:07:01.0: reg 10 32bit mmio pref: [0xf2ffe000-0xf2ffefff]
[ 0.631786] pci 0000:07:01.1: reg 10 32bit mmio pref: [0xf2fff000-0xf2ffffff]
[ 0.631874] pci 0000:07:04.0: reg 10 32bit mmio: [0xf7fff800-0xf7ffffff]
[ 0.631879] pci 0000:07:04.0: reg 14 io port: [0xec00-0xec7f]
[ 0.631917] pci 0000:07:04.0: supports D2
[ 0.631919] pci 0000:07:04.0: PME# supported from D2 D3hot D3cold
[ 0.631922] pci 0000:07:04.0: PME# disabled
[ 0.631963] pci 0000:00:1e.0: transparent bridge
[ 0.631966] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.631969] pci 0000:00:1e.0: bridge 32bit mmio: [0xf7f00000-0xf7ffffff]
[ 0.631973] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf2f00000-0xf2ffffff]
[ 0.631999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.632166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 0.632279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.632334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.632382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[ 0.632429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[ 0.632476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
[ 0.632534] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
[ 0.652115] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.652217] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.652315] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.652414] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.652514] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.652614] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.652713] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.652813] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.652889] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.652892] vgaarb: loaded
[ 0.652923] PCI: Using ACPI for IRQ routing
[ 0.653049] alloc irq_desc for 24 on node -1
[ 0.653050] alloc kstat_irqs on node -1
[ 0.653055] alloc irq_desc for 25 on node -1
[ 0.653056] alloc kstat_irqs on node -1
[ 0.653059] alloc irq_desc for 26 on node -1
[ 0.653060] alloc kstat_irqs on node -1
[ 0.653063] alloc irq_desc for 27 on node -1
[ 0.653064] alloc kstat_irqs on node -1
[ 0.653067] alloc irq_desc for 28 on node -1
[ 0.653068] alloc kstat_irqs on node -1
[ 0.653070] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.653077] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 0.653081] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.655563] hpet: hpet2 irq 24 for MSI
[ 0.655697] hpet: hpet3 irq 25 for MSI
[ 0.659703] hpet: hpet4 irq 26 for MSI
[ 0.663699] hpet: hpet5 irq 27 for MSI
[ 0.663733] Switching to clocksource tsc
[ 0.664562] pnp: PnP ACPI init
[ 0.664568] ACPI: bus type pnp registered
[ 0.667116] pnp: PnP ACPI: found 16 devices
[ 0.667118] ACPI: ACPI bus type pnp unregistered
[ 0.667124] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.667129] system 00:06: ioport range 0x290-0x29f has been reserved
[ 0.667132] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.667134] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.667136] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.667138] system 00:07: ioport range 0x600-0x607 has been reserved
[ 0.667140] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.667142] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.667144] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 0.667147] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.667151] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.667153] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.667156] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.667160] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.667161] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.667163] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.667165] system 00:0f: iomem range 0x100000-0xdfffffff could not be reserved
[ 0.667167] system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.671818] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[ 0.671821] pci 0000:00:03.0: IO window: 0xb000-0xbfff
[ 0.671824] pci 0000:00:03.0: MEM window: 0xf4000000-0xf7cfffff
[ 0.671826] pci 0000:00:03.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.671830] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:06
[ 0.671832] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.671836] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf01fffff
[ 0.671839] pci 0000:00:1c.0: PREFETCH window: 0x000000f0200000-0x000000f03fffff
[ 0.671844] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
[ 0.671846] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 0.671849] pci 0000:00:1c.4: MEM window: 0xf0400000-0xf05fffff
[ 0.671852] pci 0000:00:1c.4: PREFETCH window: 0x000000f0600000-0x000000f07fffff
[ 0.671857] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[ 0.671859] pci 0000:00:1c.5: IO window: 0x3000-0x3fff
[ 0.671863] pci 0000:00:1c.5: MEM window: 0xf0800000-0xf09fffff
[ 0.671866] pci 0000:00:1c.5: PREFETCH window: 0x000000f0a00000-0x000000f0bfffff
[ 0.671871] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:03
[ 0.671873] pci 0000:00:1c.6: IO window: 0xd000-0xdfff
[ 0.671876] pci 0000:00:1c.6: MEM window: 0xf7e00000-0xf7efffff
[ 0.671880] pci 0000:00:1c.6: PREFETCH window: 0x000000f0c00000-0x000000f0dfffff
[ 0.671884] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:02
[ 0.671886] pci 0000:00:1c.7: IO window: 0xc000-0xcfff
[ 0.671890] pci 0000:00:1c.7: MEM window: 0xf7d00000-0xf7dfffff
[ 0.671893] pci 0000:00:1c.7: PREFETCH window: 0x000000f2e00000-0x000000f2efffff
[ 0.671898] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 0.671900] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.671904] pci 0000:00:1e.0: MEM window: 0xf7f00000-0xf7ffffff
[ 0.671907] pci 0000:00:1e.0: PREFETCH window: 0x000000f2f00000-0x000000f2ffffff
[ 0.671916] alloc irq_desc for 16 on node -1
[ 0.671917] alloc kstat_irqs on node -1
[ 0.671921] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.671924] pci 0000:00:03.0: setting latency timer to 64
[ 0.671929] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.671932] alloc irq_desc for 17 on node -1
[ 0.671933] alloc kstat_irqs on node -1
[ 0.671936] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.671939] pci 0000:00:1c.0: setting latency timer to 64
[ 0.671944] pci 0000:00:1c.4: enabling device (0104 -> 0107)
[ 0.671947] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.671950] pci 0000:00:1c.4: setting latency timer to 64
[ 0.671955] pci 0000:00:1c.5: enabling device (0104 -> 0107)
[ 0.671958] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.671961] pci 0000:00:1c.5: setting latency timer to 64
[ 0.671966] alloc irq_desc for 18 on node -1
[ 0.671967] alloc kstat_irqs on node -1
[ 0.671970] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.671973] pci 0000:00:1c.6: setting latency timer to 64
[ 0.671978] alloc irq_desc for 19 on node -1
[ 0.671981] alloc kstat_irqs on node -1
[ 0.671984] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.671987] pci 0000:00:1c.7: setting latency timer to 64
[ 0.671991] pci 0000:00:1e.0: setting latency timer to 64
[ 0.671994] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.671996] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.671998] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.671999] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf7cfffff]
[ 0.672001] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.672003] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff]
[ 0.672004] pci_bus 0000:06: resource 1 mem: [0xf0000000-0xf01fffff]
[ 0.672006] pci_bus 0000:06: resource 2 pref mem [0xf0200000-0xf03fffff]
[ 0.672007] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff]
[ 0.672009] pci_bus 0000:05: resource 1 mem: [0xf0400000-0xf05fffff]
[ 0.672010] pci_bus 0000:05: resource 2 pref mem [0xf0600000-0xf07fffff]
[ 0.672012] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
[ 0.672013] pci_bus 0000:04: resource 1 mem: [0xf0800000-0xf09fffff]
[ 0.672015] pci_bus 0000:04: resource 2 pref mem [0xf0a00000-0xf0bfffff]
[ 0.672016] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.672018] pci_bus 0000:03: resource 1 mem: [0xf7e00000-0xf7efffff]
[ 0.672019] pci_bus 0000:03: resource 2 pref mem [0xf0c00000-0xf0dfffff]
[ 0.672021] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.672023] pci_bus 0000:02: resource 1 mem: [0xf7d00000-0xf7dfffff]
[ 0.672024] pci_bus 0000:02: resource 2 pref mem [0xf2e00000-0xf2efffff]
[ 0.672026] pci_bus 0000:07: resource 0 io: [0xe000-0xefff]
[ 0.672027] pci_bus 0000:07: resource 1 mem: [0xf7f00000-0xf7ffffff]
[ 0.672029] pci_bus 0000:07: resource 2 pref mem [0xf2f00000-0xf2ffffff]
[ 0.672030] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 0.672032] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.672050] NET: Registered protocol family 2
[ 0.672210] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.672950] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.675135] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.675400] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.675402] TCP reno registered
[ 0.675498] NET: Registered protocol family 1
[ 0.675563] pci 0000:01:00.0: Boot video device
[ 0.675596] Unpacking initramfs...
[ 0.824507] Freeing initrd memory: 8978k freed
[ 0.826021] audit: initializing netlink socket (disabled)
[ 0.826029] type=2000 audit(1301814140.576:1): initialized
[ 0.829819] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.830695] VFS: Disk quotas dquot_6.5.2
[ 0.830727] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.830781] msgmni has been set to 16005
[ 0.830911] alg: No test for stdrng (krng)
[ 0.830942] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.830944] io scheduler noop registered
[ 0.830945] io scheduler anticipatory registered
[ 0.830946] io scheduler deadline registered
[ 0.830969] io scheduler cfq registered (default)
[ 0.831048] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.831115] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.831187] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.831258] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.831331] pcieport 0000:00:1c.6: setting latency timer to 64
[ 0.831402] pcieport 0000:00:1c.7: setting latency timer to 64
[ 0.832321] Linux agpgart interface v0.103
[ 0.832347] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.832435] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.832672] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.832766] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.832801] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.832803] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.833267] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.833310] mice: PS/2 mouse device common for all mice
[ 0.833333] rtc_cmos 00:03: RTC can wake from S4
[ 0.833353] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.833376] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.833384] cpuidle: using governor ladder
[ 0.833385] cpuidle: using governor menu
[ 0.833389] No iBFT detected.
[ 0.833606] TCP cubic registered
[ 0.833675] NET: Registered protocol family 10
[ 0.834207] Mobile IPv6
[ 0.834209] NET: Registered protocol family 17
[ 0.834255] PM: Resume from disk failed.
[ 0.834260] registered taskstats version 1
[ 0.834686] rtc_cmos 00:03: setting system clock to 2011-04-03 07:02:20 UTC (1301814140)
[ 0.834707] Initalizing network drop monitor service
[ 0.834725] Freeing unused kernel memory: 592k freed
[ 0.834808] Write protecting the kernel read-only data: 4236k
[ 0.843547] udev[76]: starting version 164
[ 0.853053] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.882026] SCSI subsystem initialized
[ 0.882924] usbcore: registered new interface driver usbfs
[ 0.882977] usbcore: registered new interface driver hub
[ 0.883071] usbcore: registered new device driver usb
[ 0.883536] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.883554] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.883598] r8169 0000:02:00.0: setting latency timer to 64
[ 0.883617] r8169 0000:02:00.0: no MSI. Back to INTx.
[ 0.883998] eth0: RTL8168d/8111d at 0xffffc90000c7e000, 48:5b:39:29:e6:0a, XID 083000c0 IRQ 19
[ 0.884735] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.884752] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.884767] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.884770] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.884784] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.884814] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.888722] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 0.888734] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf3ffe000
[ 0.894810] libata version 3.00 loaded.
[ 0.897271] eth0: unable to apply firmware patch
[ 0.898346] ahci 0000:03:00.0: version 3.0
[ 0.898359] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.899434] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.899449] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.899451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.899452] usb usb1: Product: EHCI Host Controller
[ 0.899454] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.899455] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.899509] usb usb1: configuration #1 chosen from 1 choice
[ 0.899528] hub 1-0:1.0: USB hub found
[ 0.899533] hub 1-0:1.0: 2 ports detected
[ 0.899569] ata_piix 0000:00:1f.2: version 2.13
[ 0.899577] alloc irq_desc for 21 on node -1
[ 0.899578] alloc kstat_irqs on node -1
[ 0.899583] ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 0.899586] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.899610] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.899648] scsi0 : ata_piix
[ 0.899701] scsi1 : ata_piix
[ 0.900940] ata1: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
[ 0.900944] ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
[ 0.900963] alloc irq_desc for 23 on node -1
[ 0.900964] alloc kstat_irqs on node -1
[ 0.900968] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.900984] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.900986] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.900993] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.901016] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.904891] firewire_ohci 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.904894] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 0.904904] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf3ffd000
[ 0.911444] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.911451] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.911459] ahci 0000:03:00.0: setting latency timer to 64
[ 0.911563] scsi2 : ahci
[ 0.911607] scsi3 : ahci
[ 0.911665] ata3: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 18
[ 0.911668] ata4: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe180 irq 18
[ 0.911694] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.911699] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.911721] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.911771] scsi4 : pata_jmicron
[ 0.911811] scsi5 : pata_jmicron
[ 0.912265] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
[ 0.912267] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
[ 0.915445] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.915469] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.915472] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.915478] usb usb2: Product: EHCI Host Controller
[ 0.915480] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.915481] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.915538] usb usb2: configuration #1 chosen from 1 choice
[ 0.915572] hub 2-0:1.0: USB hub found
[ 0.915576] hub 2-0:1.0: 2 ports detected
[ 0.915612] ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 0.915616] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.915638] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.915667] scsi6 : ata_piix
[ 0.915705] scsi7 : ata_piix
[ 0.916698] ata7: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
[ 0.916701] ata8: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
[ 0.983294] firewire_ohci: Added fw-ohci device 0000:07:04.0, OHCI version 1.10
[ 1.075678] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[ 1.091664] ata5.00: configured for UDMA/33
[ 1.210923] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.230912] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.230919] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.245525] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.256144] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.343082] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.343086] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.343172] usb 1-1: configuration #1 chosen from 1 choice
[ 1.343361] hub 1-1:1.0: USB hub found
[ 1.343449] hub 1-1:1.0: 6 ports detected
[ 1.454532] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.482535] firewire_core: created device fw0: GUID 001e8c0000d24f9f, S400
[ 1.586701] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.586705] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.586781] usb 2-1: configuration #1 chosen from 1 choice
[ 1.586961] hub 2-1:1.0: USB hub found
[ 1.587064] hub 2-1:1.0: 8 ports detected
[ 1.694181] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.694201] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.694203] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.694219] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.702508] ata2.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
[ 1.702512] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.718486] ata2.00: configured for UDMA/133
[ 1.718504] ata1.00: ATA-8: OCZ-VERTEX2, 1.25, max UDMA/133
[ 1.718507] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.750257] ata1.00: configured for UDMA/133
[ 1.750333] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.25 PQ: 0 ANSI: 5
[ 1.750463] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 1.754320] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[ 1.858034] usb 2-1.8: new low speed USB device using ehci_hcd and address 3
[ 1.925247] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.925276] sd 0:0:0:0: [sda] Write Protect is off
[ 1.925278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.925290] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.925382] sda: sda1 <
[ 1.925700] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.925737] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.925739] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.925751] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.925763] sda5 sda6 > sda2
[ 1.925890] sdb:
[ 1.926111] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.932005] sdb1 sdb2 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.939202] Uniform CD-ROM driver Revision: 3.20
[ 1.939280] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.940717] sdb5 sdb6
[ 1.956370] usb 2-1.8: New USB device found, idVendor=046d, idProduct=c00c
[ 1.956375] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.956378] usb 2-1.8: Product: USB Mouse
[ 1.956381] usb 2-1.8: Manufacturer: Logitech
[ 1.956452] usb 2-1.8: configuration #1 chosen from 1 choice
[ 1.960642] sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 >
[ 2.019855] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.021709] usbcore: registered new interface driver hiddev
[ 2.023752] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.023772] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.023789] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 2.025749] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input2
[ 2.025793] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-1.8/input0
[ 2.025806] usbcore: registered new interface driver usbhid
[ 2.025807] usbhid: v2.6:USB HID core driver
[ 2.793169] PM: Starting manual resume from disk
[ 2.793172] PM: Resume from partition 8:5
[ 2.793173] PM: Checking hibernation image.
[ 2.793357] PM: Error -22 checking image file
[ 2.793360] PM: Resume from disk failed.
[ 2.801467] kjournald starting. Commit interval 5 seconds
[ 2.801474] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.939076] udev[451]: starting version 164
[ 2.970017] ACPI: SSDT 00000000dfe880c0 01238 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 2.970380] ACPI: SSDT 00000000dfe89300 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 2.978037] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 2.978212] ACPI: Power Button [PWRB]
[ 2.978697] Monitor-Mwait will be used to enter C-1 state
[ 3.001067] Monitor-Mwait will be used to enter C-2 state
[ 3.001123] processor LNXCPU:00: registered as cooling_device0
[ 3.001793] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.001820] ACPI: Power Button [PWRF]
[ 3.016147] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.016926] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.019656] processor LNXCPU:01: registered as cooling_device1
[ 3.020562] processor LNXCPU:02: registered as cooling_device2
[ 3.028522] [drm] Initialized drm 1.1.0 20060810
[ 3.028721] processor LNXCPU:03: registered as cooling_device3
[ 3.043454] ATK0110 ATK0110:00: EC enabled
[ 3.052175] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.052179] nouveau 0000:01:00.0: setting latency timer to 64
[ 3.054079] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096000c1)
[ 3.054700] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 3.076399] Linux video capture interface: v2.00
[ 3.091100] bttv: driver version 0.9.18 loaded
[ 3.091161] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 3.091185] bttv: Bt8xx card found (0).
[ 3.091196] bttv 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.091204] bttv0: Bt878 (rev 17) at 0000:07:01.0, irq: 16, latency: 64, mmio: 0xf2ffe000
[ 3.091292] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[ 3.091294] IRQ 16/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 3.091319] bttv0: gpio: en=00000000, out=00000000 in=0044dfff [init]
[ 3.092341] tveeprom 1-0050: Huh, no eeprom present (err=-6)?
[ 3.092400] bttv0: tuner type unset
[ 3.092429] bttv0: registered device video0
[ 3.092446] bttv0: registered device vbi0
[ 3.112120] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 3.112122] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 3.112124] [drm] nouveau 0000:01:00.0: Bios version 62.94.96.00
[ 3.112126] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 3.112128] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 3.112130] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 3.112132] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 3.112134] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 3.112136] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
[ 3.112138] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
[ 3.112139] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 3.112149] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD235
[ 3.117023] alloc irq_desc for 22 on node -1
[ 3.117025] alloc kstat_irqs on node -1
[ 3.117030] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.117094] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.164226] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD69E
[ 3.180089] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE726
[ 3.180099] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE847
[ 3.188124] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEB6F
[ 3.188126] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEBD4
[ 3.215645] [drm] nouveau 0000:01:00.0: 0xEBD4: Condition still not met after 20ms, skipping following opcodes
[ 3.215653] [drm] nouveau 0000:01:00.0: 0xC07A: parsing output script 0
[ 3.306573] [TTM] Zone kernel: Available graphics memory: 4097698 kiB.
[ 3.306575] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 3.306584] [drm] nouveau 0000:01:00.0: 512 MiB VRAM
[ 3.374815] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 3.374821] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 3.375306] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 3.390789] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 3.392138] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 3.392140] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 3.392141] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 3.392143] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 3.392172] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 3.565793] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff88021b7d7000
[ 3.570317] [drm] nouveau 0000:01:00.0: 0xC098: parsing output script 1
[ 3.570325] [drm] nouveau 0000:01:00.0: 0xC0A6: parsing output script 2
[ 3.570334] [drm] nouveau 0000:01:00.0: 0xBCF4: parsing clock script 0
[ 3.570617] [drm] nouveau 0000:01:00.0: 0xB898: parsing clock script 1
[ 3.570810] Console: switching to colour frame buffer device 160x64
[ 3.572446] fb0: nouveaufb frame buffer device
[ 3.572447] registered panic notifier
[ 3.572449] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 4.094775] Adding 9764856k swap on /dev/sda5. Priority:-1 extents:1 across:9764856k SS
[ 4.157626] EXT3 FS on sda2, internal journal
[ 4.171431] loop: module loaded
[ 4.221946] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x02af0900
[ 4.234365] kjournald starting. Commit interval 5 seconds
[ 4.234471] EXT3 FS on sda6, internal journal
[ 4.234478] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.250014] kjournald starting. Commit interval 5 seconds
[ 4.250034] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
[ 4.250386] EXT3 FS on sdb12, internal journal
[ 4.250388] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.388602] fuse init (API version 7.13)
[ 4.973373] r8169: eth0: link up
[ 4.973382] r8169: eth0: link up
[ 5.018292] Bluetooth: Core ver 2.15
[ 5.018384] NET: Registered protocol family 31
[ 5.018386] Bluetooth: HCI device and connection manager initialized
[ 5.018388] Bluetooth: HCI socket layer initialized
[ 5.027779] Bluetooth: L2CAP ver 2.14
[ 5.027781] Bluetooth: L2CAP socket layer initialized
[ 5.034664] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.034665] Bluetooth: BNEP filters: protocol multicast
[ 5.039420] Bridge firewalling registered
[ 5.042951] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.042952] Bluetooth: SCO socket layer initialized
[ 5.126003] Bluetooth: RFCOMM TTY layer initialized
[ 5.126009] Bluetooth: RFCOMM socket layer initialized
[ 5.126012] Bluetooth: RFCOMM ver 1.11
[ 5.337186] lp: driver loaded but no devices found
[ 5.342512] ppdev: user-space parallel port driver
[ 15.399570] eth0: no IPv6 routers present
[ 16.975830] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 17.039070] CPU0 attaching NULL sched-domain.
[ 17.039076] CPU1 attaching NULL sched-domain.
[ 17.039080] CPU2 attaching NULL sched-domain.
[ 17.039083] CPU3 attaching NULL sched-domain.
[ 17.065357] CPU0 attaching sched-domain:
[ 17.065361] domain 0: span 0-3 level MC
[ 17.065365] groups: 0 1 2 3
[ 17.065374] CPU1 attaching sched-domain:
[ 17.065377] domain 0: span 0-3 level MC
[ 17.065380] groups: 1 2 3 0
[ 17.065388] CPU2 attaching sched-domain:
[ 17.065391] domain 0: span 0-3 level MC
[ 17.065394] groups: 2 3 0 1
[ 17.065401] CPU3 attaching sched-domain:
[ 17.065404] domain 0: span 0-3 level MC
[ 17.065407] groups: 3 0 1 2
[ 750.836937] CPU0 attaching NULL sched-domain.
[ 750.836940] CPU1 attaching NULL sched-domain.
[ 750.836942] CPU2 attaching NULL sched-domain.
[ 750.836943] CPU3 attaching NULL sched-domain.
[ 750.863371] CPU0 attaching sched-domain:
[ 750.863374] domain 0: span 0-3 level MC
[ 750
 

Thread Tools




All times are GMT. The time now is 09:57 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org