FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 03-24-2011, 09:30 AM
"Andrew O. Shadoura"
 
Default Bug#619472: X.org with i915 produces garbage sometimes being run on Linux 2.6.38

Package: linux-2.6
Version: 2.6.38-1
Severity: normal

After upgrading the kernel, X.org produces garbage in random screen areas.
That garbage persists in the windows in which it appears (I'm able to take
a screenshot of it).

-- Package-specific info:
** Version:
Linux version 2.6.38-1-686 (Debian 2.6.38-1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Wed Mar 16 17:37:47 UTC 2011

** Command line:
root=UUID=970a25e2-30c2-4cd0-b6b0-0cc69e297c52 ro quiet splash video=radeonfb:mode_option=1400x1050-24@60

** Not tainted

** Kernel log:
[ 3244.698833] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3244.698840] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3244.698868] usb usb4: root hub lost power or was reset
[ 3244.698883] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3244.698890] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3244.698943] pci 0000:00:1e.0: setting latency timer to 64
[ 3244.698960] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3244.698966] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3244.699139] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3244.699207] tg3 0000:09:00.0: wake-up capability disabled by ACPI
[ 3244.699214] tg3 0000:09:00.0: PME# disabled
[ 3244.733346] sd 0:0:0:0: [sda] Starting disk
[ 3244.793753] serial 00:0c: activated
[ 3244.932318] ata2.00: configured for UDMA/33
[ 3245.096041] usb 1-2: reset full speed USB device using uhci_hcd and address 2
[ 3245.541132] usb 1-2.3: reset full speed USB device using uhci_hcd and address 4
[ 3245.953128] usb 1-2.3.2: reset full speed USB device using uhci_hcd and address 5
[ 3246.612253] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3246.628592] ata1.00: configured for UDMA/100
[ 3246.785697] PM: resume of devices complete after 2089.670 msecs
[ 3246.785938] PM: Finishing wakeup.
[ 3246.785940] Restarting tasks ...
[ 3246.792755] usb 1-2.2: USB disconnect, address 3
[ 3246.793015] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 3246.793038] option 1-2.2:1.0: device disconnected
[ 3246.793161] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 3246.793180] option 1-2.2:1.1: device disconnected
[ 3246.794895] done.
[ 3246.794902] video LNXVIDEO:01: Restoring backlight state
[ 3246.837714] composite sync not supported
[ 3247.362692] composite sync not supported
[ 3247.786113] usb 1-2.2: new full speed USB device using uhci_hcd and address 6
[ 3247.923106] usb 1-2.2: New USB device found, idVendor=413c, idProduct=8116
[ 3247.923110] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3247.923113] usb 1-2.2: Product: Novatel Wireless HSDPA Modem
[ 3247.923116] usb 1-2.2: Manufacturer: Novatel Wireless
[ 3247.929171] option 1-2.2:1.0: GSM modem (1-port) converter detected
[ 3247.929307] usb 1-2.2: GSM modem (1-port) converter now attached to ttyUSB0
[ 3247.931136] option 1-2.2:1.1: GSM modem (1-port) converter detected
[ 3247.931224] usb 1-2.2: GSM modem (1-port) converter now attached to ttyUSB1
[ 3248.004560] ata1.00: configured for UDMA/100
[ 3248.004567] ata1: EH complete
[ 3249.100750] ata1.00: configured for UDMA/100
[ 3249.100761] ata1: EH complete
[ 3249.504695] ata1.00: configured for UDMA/100
[ 3249.504706] ata1: EH complete
[ 3249.928722] ata1.00: configured for UDMA/100
[ 3249.928732] ata1: EH complete
[ 3250.312724] ata1.00: configured for UDMA/100
[ 3250.312735] ata1: EH complete
[ 3250.712688] ata1.00: configured for UDMA/100
[ 3250.712699] ata1: EH complete
[ 3251.136741] ata1.00: configured for UDMA/100
[ 3251.136752] ata1: EH complete
[ 3251.552698] ata1.00: configured for UDMA/100
[ 3251.552709] ata1: EH complete
[ 3251.968715] ata1.00: configured for UDMA/100
[ 3251.968726] ata1: EH complete
[ 3269.787695] tg3 0000:09:00.0: eth1: Link is up at 1000 Mbps, full duplex
[ 3269.787703] tg3 0000:09:00.0: eth1: Flow control is off for TX and off for RX
[ 3269.788067] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 3270.276053] device eth1 entered promiscuous mode
[ 3270.289209] device eth1 left promiscuous mode
[ 3280.744078] eth1: no IPv6 routers present
[ 3286.688125] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 3286.856188] usb 3-2: New USB device found, idVendor=04d9, idProduct=1400
[ 3286.856196] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3287.015892] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input11
[ 3287.016382] generic-usb 0003:04D9:1400.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1d.2-2/input0
[ 3287.049198] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.1/input/input12
[ 3287.049521] generic-usb 0003:04D9:1400.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1d.2-2/input1
[ 3287.049558] usbcore: registered new interface driver usbhid
[ 3287.049562] usbhid: USB HID core driver
[ 5086.461613] FS-Cache: Loaded
[ 5086.498179] FS-Cache: Netfs 'cifs' registered for caching
[14208.198035] usb 1-2.4: new full speed USB device using uhci_hcd and address 7
[14208.350049] usb 1-2.4: New USB device found, idVendor=413c, idProduct=8103
[14208.350056] usb 1-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[14210.676074] Bluetooth: Generic Bluetooth USB driver ver 0.6
[14210.676292] usbcore: registered new interface driver btusb
[14212.036086] b43-phy0: Radio hardware status changed to ENABLED
[14212.412090] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[14212.485443] ADDRCONF(NETDEV_UP): wlan2: link is not ready
[14213.052138] device wlan2 entered promiscuous mode
[14214.694716] device wlan2 left promiscuous mode
[14216.384139] wlan2: authenticate with 00:0a:07:52:23:7c (try 1)
[14216.393193] wlan2: authenticated
[14216.393236] wlan2: associate with 00:0a:07:52:23:7c (try 1)
[14216.395543] wlan2: RX AssocResp from 00:0a:07:52:23:7c (capab=0x431 status=0 aid=2)
[14216.395548] wlan2: associated
[14216.396669] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[14226.624080] wlan2: no IPv6 routers present
[14290.442565] wlan2: deauthenticated from 00:0a:07:52:23:7c (Reason: 3)
[14290.456130] cfg80211: Calling CRDA for country: DE
[14293.736626] usb 1-2.4: USB disconnect, address 7
[14293.738030] btusb_intr_complete: hci0 urb f56e5a00 failed to resubmit (19)
[14293.738042] btusb_bulk_complete: hci0 urb f56e5200 failed to resubmit (19)
[14293.738246] btusb_bulk_complete: hci0 urb f56e5280 failed to resubmit (19)
[14293.738525] btusb_send_frame: hci0 urb d8fedd80 submission failed
[14297.008098] b43-phy0: Radio hardware status changed to DISABLED

** Model information
not available

** Loaded modules:
Module Size Used by
btusb 7877 0
md4 2577 0
hmac 2017 1
nls_utf8 928 1
cifs 205649 2
fscache 24710 1 cifs
usbhid 25388 0
hid 51616 1 usbhid
sco 6039 2
bnep 7739 2
rfcomm 23648 4
l2cap 26999 6 bnep,rfcomm
crc16 1043 1 l2cap
bluetooth 39747 7 btusb,sco,bnep,rfcomm,l2cap
acpi_cpufreq 4429 0
mperf 955 1 acpi_cpufreq
cpufreq_conservative 6198 0
cpufreq_powersave 622 0
cpufreq_stats 1942 0
cpufreq_userspace 1492 0
xt_tcpudp 1659 0
iptable_filter 972 0
ip_tables 7834 1 iptable_filter
x_tables 9171 3 xt_tcpudp,iptable_filter,ip_tables
ppdev 4049 0
parport_pc 15579 0
lp 5594 0
parport 20898 3 ppdev,parport_pc,lp
pppoe 6056 0
pppox 1234 1 pppoe
sit 8022 0
tunnel4 1489 1 sit
ppp_generic 16127 2 pppoe,pppox
slhc 3502 1 ppp_generic
pktcdvd 20032 1
tun 9695 2
binfmt_misc 4762 1
uinput 5048 1
kvm_intel 37610 0
kvm 214376 1 kvm_intel
fuse 48252 1
visor 6796 0
ircomm_tty 13113 0
ircomm 5918 1 ircomm_tty
loop 10505 0
snd_hda_codec_idt 37819 1
snd_hda_intel 16433 0
snd_hda_codec 51871 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 3990 1 snd_hda_codec
snd_pcm_oss 27020 0
snd_mixer_oss 10065 1 snd_pcm_oss
snd_pcm 46902 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
ks959_sir 5195 0
snd_seq_midi 3480 0
snd_rawmidi 12531 1 snd_seq_midi
snd_seq_midi_event 3652 1 snd_seq_midi
arc4 1010 2
joydev 6906 0
ecb 1421 2
snd_seq 34344 2 snd_seq_midi,snd_seq_midi_event
ac 1648 0
b43 135153 0
i915 267668 3
drm_kms_helper 19757 1 i915
drm 121728 4 i915,drm_kms_helper
mac80211 153213 1 b43
option 12926 0
cfg80211 99905 2 b43,mac80211
button 3634 1 i915
dell_laptop 6364 0
processor 21043 3 acpi_cpufreq
battery 4370 0
dell_wmi 1101 0
sparse_keymap 1940 1 dell_wmi
usb_wwan 6582 1 option
yenta_socket 15632 0
snd_timer 12379 2 snd_pcm,snd_seq
snd_seq_device 3667 3 snd_seq_midi,snd_rawmidi,snd_seq
wmi 6202 1 dell_wmi
snd 33749 11 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_ hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmid i,snd_seq,snd_timer,snd_seq_device
usbserial 21226 3 visor,option,usb_wwan
pcmcia_rsrc 7078 1 yenta_socket
serio_raw 2910 0
irda 70715 3 ircomm_tty,ircomm,ks959_sir
psmouse 39239 0
power_supply 5535 3 ac,dell_laptop,battery
video 9241 1 i915
rfkill 10550 4 bluetooth,cfg80211,dell_laptop
evdev 6208 28
tpm_tis 5441 0
dcdbas 3752 1 dell_laptop
soundcore 3390 1 snd
snd_page_alloc 4933 2 snd_hda_intel,snd_pcm
tpm 8118 1 tpm_tis
i2c_i801 6198 0
tpm_bios 3455 1 tpm
rng_core 2306 1 b43
crc_ccitt 1055 1 irda
ext3 92941 1
jbd 31766 1 ext3
mbcache 3686 1 ext3
fan 1742 0
sg 15549 0
sd_mod 25177 3
sr_mod 10794 1
cdrom 26023 2 pktcdvd,sr_mod
crc_t10dif 1028 1 sd_mod
ata_generic 2191 0
ata_piix 17543 3
thermal 6062 0
ssb 32878 1 b43
libata 123224 2 ata_generic,ata_piix
tg3 96079 0
ehci_hcd 29129 0
uhci_hcd 15806 0
mmc_core 46505 2 b43,ssb
thermal_sys 9943 4 processor,video,fan,thermal
scsi_mod 127777 4 sg,sr_mod,sd_mod,libata
usbcore 94046 10 btusb,usbhid,visor,ks959_sir,option,usb_wwan,usbse rial,ehci_hcd,uhci_hcd
libphy 11583 1 tg3
pcmcia 24628 2 b43,ssb
pcmcia_core 8273 3 yenta_socket,pcmcia_rsrc,pcmcia
nls_base 4529 3 nls_utf8,cifs,usbcore
radeonfb 46328 0
fb_ddc 1005 1 radeonfb
i2c_algo_bit 3438 2 i915,radeonfb
i2c_core 12965 7 i915,drm_kms_helper,drm,i2c_i801,radeonfb,fb_ddc,i 2c_algo_bit

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Dell Device [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at eff8 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at efec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at eff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at efebc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 4a000000-4a1fffff
Prefetchable memory behind bridge: 000000004a200000-000000004a3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: efd00000-efdfffff
Prefetchable memory behind bridge: 000000004a400000-000000004a5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: efc00000-efcfffff
Prefetchable memory behind bridge: 000000004a600000-000000004a7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 44000000-49ffffff
Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: leds-ss4200, intel-rng, iTCO_wdt

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master])
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

03:01.0 CardBus bridge [0607]: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller [1217:6972] (rev 40)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 48000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 40000000-43fff000 (prefetchable)
Memory window 1: 44000000-47fff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket

09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02)
Subsystem: Dell Latitude D620 [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at efcf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3

0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 01)
Subsystem: Dell Wireless 1490 Dual Band WLAN Mini-Card [1028:0007]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at efdfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb


** USB devices:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 413c:8116 Dell Computer Corp. Wireless 5505 Mobile Broadband (3G HSDPA) Minicard Modem
Bus 001 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader
Bus 001 Device 004: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 001 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04d9:1400 Holtek Semiconductor, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 6.0
APT prefers sid
APT policy: (500, 'sid'), (500, 'oldstable'), (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.38-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.38-1-686 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii linux-base 3 Linux image base package
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.38-1-686 recommends:
ii firmware-linux-free 2.6.32-28 Binary firmware for various driver
ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.38-1-686 suggests:
pn grub-pc | extlinux | lilo <none> (no description available)
pn linux-doc-2.6.38 <none> (no description available)

Versions of packages linux-image-2.6.38-1-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

Additional package version information:
ii libdrm-intel1 2.4.23-3 Userspace interface to intel-specific kernel DRM services -- runtime
ii libdrm2 2.4.23-3 Userspace interface to kernel DRM services -- runtime
ii xserver-xorg-video-intel 2:2.14.0-4+exp1 X.Org X server -- Intel i8xx, i9xx display driver
ii xserver-xorg-core 2:1.9.4-3 Xorg X server - core server

-- debconf information:
linux-image-2.6.38-1-686/prerm/removing-running-kernel-2.6.38-1-686: true
linux-image-2.6.38-1-686/postinst/depmod-error-initrd-2.6.38-1-686: false
linux-image-2.6.38-1-686/postinst/ignoring-do-bootloader-2.6.38-1-686:
* linux-image-2.6.38-1-686/postinst/missing-firmware-2.6.38-1-686:
 
Old 03-24-2011, 06:21 PM
Cesare Leonardi
 
Default Bug#619472: X.org with i915 produces garbage sometimes being run on Linux 2.6.38

On 24/03/2011 11:30, Andrew O. Shadoura wrote:

After upgrading the kernel, X.org produces garbage in random screen areas.
That garbage persists in the windows in which it appears (I'm able to take
a screenshot of it).


I would suggest you to give a look at this:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=619472
Here the problem seems to be in xserver-xorg-driver-intel, not in the
kernel.


But you have a rather new i945, so this can be unrelated.

Hope to help.

Cesare.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4D8B99C8.50402@gmail.com">http://lists.debian.org/4D8B99C8.50402@gmail.com
 
Old 03-25-2011, 09:42 AM
"Andrew O. Shadoura"
 
Default Bug#619472: X.org with i915 produces garbage sometimes being run on Linux 2.6.38

Hello,

On Thu, 24 Mar 2011 20:21:44 +0100
Cesare Leonardi <celeonar@gmail.com> wrote:

> On 24/03/2011 11:30, Andrew O. Shadoura wrote:
> > After upgrading the kernel, X.org produces garbage in random screen
> > areas. That garbage persists in the windows in which it appears
> > (I'm able to take a screenshot of it).
> I would suggest you to give a look at this:
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=619472
> Here the problem seems to be in xserver-xorg-driver-intel, not in the
> kernel.

Possibly. But somehow this worked fine with 2.6.36.
But thanks anyway.

--
WBR, Andrew
 
Old 03-25-2011, 07:35 PM
Cesare Leonardi
 
Default Bug#619472: X.org with i915 produces garbage sometimes being run on Linux 2.6.38

On 25/03/2011 11:42, Andrew O. Shadoura wrote:

Possibly. But somehow this worked fine with 2.6.36.


That's the point. Now i have to use the 2.6.37 because with 2.6.38 i
have screen corruption. From what i've understood from Intel developers,
2.6.38 contains changes that require an x driver not yet released or
older than the current. Or, as we are doing, to use an older kernel.
But i believed this was a problem specific to older chipset, like mine,
so my doubts that this bug has a different origins.


Ciao.

Cesare.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4D8CFCAB.7040300@gmail.com">http://lists.debian.org/4D8CFCAB.7040300@gmail.com
 
Old 03-26-2011, 04:09 PM
Ben Hutchings
 
Default Bug#619472: X.org with i915 produces garbage sometimes being run on Linux 2.6.38

On Thu, 2011-03-24 at 12:30 +0200, Andrew O. Shadoura wrote:
> Package: linux-2.6
> Version: 2.6.38-1
> Severity: normal
>
> After upgrading the kernel, X.org produces garbage in random screen areas.
> That garbage persists in the windows in which it appears (I'm able to take
> a screenshot of it).
>
> -- Package-specific info:
> ** Version:
> Linux version 2.6.38-1-686 (Debian 2.6.38-1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Wed Mar 16 17:37:47 UTC 2011
>
> ** Command line:
> root=UUID=970a25e2-30c2-4cd0-b6b0-0cc69e297c52 ro quiet splash video=radeonfb:mode_option=1400x1050-24@60
[...]

You're loading radeonfb on a system with an Intel GPU? Harmless but a
silly.

Anyway - please report this upstream at <https://bugs.freedesktop.org>
under product 'DRI', component 'DRM/Intel'. Let us know the bug URL so
we can track it.

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.
 
Old 03-26-2011, 04:12 PM
Ben Hutchings
 
Default Bug#619472: X.org with i915 produces garbage sometimes being run on Linux 2.6.38

On Thu, 2011-03-24 at 20:21 +0100, Cesare Leonardi wrote:
> On 24/03/2011 11:30, Andrew O. Shadoura wrote:
> > After upgrading the kernel, X.org produces garbage in random screen areas.
> > That garbage persists in the windows in which it appears (I'm able to take
> > a screenshot of it).
>
> I would suggest you to give a look at this:
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=619472

That is the very same bug report you are responding to. Probably not
what you meant to refer to.

> Here the problem seems to be in xserver-xorg-driver-intel, not in the
> kernel.
>
> But you have a rather new i945, so this can be unrelated.

Yes, different chips have different problems.

> That's the point. Now i have to use the 2.6.37 because with 2.6.38 i
> have screen corruption. From what i've understood from Intel developers,
> 2.6.38 contains changes that require an x driver not yet released or
> older than the current.

And this is simply not true.

Please don't reply to bugs unless you are a maintainer or have real
information to add.

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.
 
Old 03-26-2011, 06:37 PM
"Andrew O. Shadoura"
 
Default Bug#619472: X.org with i915 produces garbage sometimes being run on Linux 2.6.38

Hello,

On Sat, 26 Mar 2011 17:09:12 +0000
Ben Hutchings <ben@decadent.org.uk> wrote:

> > ** Command line:
> > root=UUID=970a25e2-30c2-4cd0-b6b0-0cc69e297c52 ro quiet splash
> > video=radeonfb:mode_option=1400x1050-24@60
> [...]
> You're loading radeonfb on a system with an Intel GPU? Harmless but a
> silly.

My previous laptop had Mobility Radeon 7500 (which by the way wasn't
fully supported by X --- I had no hardware acceleration).

> Anyway - please report this upstream at <https://bugs.freedesktop.org>
> under product 'DRI', component 'DRM/Intel'. Let us know the bug URL
> so we can track it.

Okay, will do so.

--
WBR, Andrew
 
Old 03-26-2011, 07:37 PM
"Andrew O. Shadoura"
 
Default Bug#619472: X.org with i915 produces garbage sometimes being run on Linux 2.6.38

Hello all,

The bugs is reported to be fixed here:
http://cgit.freedesktop.org/~ickle/linux-2.6/commit/?h=2.6.38&id=3b936797f5e4623ae1b80a5f0c4df30a17360 bf5


--
WBR, Andrew
 
Old 03-26-2011, 07:39 PM
"Andrew O. Shadoura"
 
Default Bug#619472: X.org with i915 produces garbage sometimes being run on Linux 2.6.38

Hello,

On Sat, 26 Mar 2011 21:27:14 +0100
Sebastian Reichel <sre@debian.org> wrote:

> > My previous laptop had Mobility Radeon 7500 (which by the way wasn't
> > fully supported by X --- I had no hardware acceleration).

> That's not correct, my previous laptop also had a Radeon 7500
> Mobility and I had hw acceleration in X. Upstream developers
> state this, too (7500 Mobility has an r100 chip):

Well, I do not know what do they put in those feature matrices, the
fact is that on my system no hardware acceleration was available, and
the TV out didn't work at all before the latest X, and in the latest
version it didn't work properly (the colors were shifted into the blue).

--
WBR, Andrew
 

Thread Tools




All times are GMT. The time now is 04:38 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org