Bug#619430: linux-image-2.6.32-5-686: X mouse pointer totally invisible
Package: linux-2.6
Version: 2.6.32-31
Severity: important
After kernel upgrade and reboot cant see mouse pointer in X
But seems that mouse is functioning as I can click and some menu appears on
display or can select. But no mouse pointer.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Mar 8 21:36:00 UTC 2011
[ 7.413672] ipw2200 0000:02:04.0: firmware: requesting ipw2200-bss.fw
[ 7.572051] usb 3-2: new full speed USB device using uhci_hcd and
address 2
[ 7.714460] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI
10 (level, low) -> IRQ 10
[ 7.743553] sr0: scsi3-mmc drive: 1x/24x writer cd/rw xa/form2 cdda tray
[ 7.743560] Uniform CD-ROM driver Revision: 3.20
[ 7.746239] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.748830] usb 3-2: New USB device found, idVendor=0483, idProduct=1307
[ 7.748836] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 7.748841] usb 3-2: Product: USB Mass Storage Device
[ 7.748845] usb 3-2: Manufacturer: Generic
[ 7.748848] usb 3-2: SerialNumber: ABCDEF0123456789
[ 7.749005] usb 3-2: configuration #1 chosen from 1 choice
[ 7.805754] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.806582] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.103718] [drm] Initialized drm 1.1.0 20060810
[ 8.189893] ipw2200: Radio Frequency Kill Switch is On:
[ 8.189896] Kill switch must be turned off for wireless networking to
work.
[ 8.196345] Initializing USB Mass Storage driver...
[ 8.198492] scsi2 : SCSI emulation for USB Mass Storage devices
[ 8.198838] usbcore: registered new interface driver usb-storage
[ 8.198844] USB Mass Storage support registered.
[ 8.200590] usb-storage: device found at 2
[ 8.200594] usb-storage: waiting for device to settle before scanning
[ 8.201757] ipw2200: Detected geography ZZM (11 802.11bg channels, 0
802.11a channels)
[ 8.201840] yenta_cardbus 0000:02:06.0: CardBus bridge found [152d:0707]
[ 8.201860] yenta_cardbus 0000:02:06.0: Using CSCINT to route CSC
interrupts to PCI
[ 8.479812] i915 0000:00:02.0: power state changed by ACPI to D0
[ 8.479827] i915 0000:00:02.0: power state changed by ACPI to D0
[ 8.479839] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 8.479846] i915 0000:00:02.0: setting latency timer to 64
[ 8.486964] [drm] set up 15M of stolen space
[ 8.620954] firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI
version 1.10
[ 8.642314] [drm] initialized overlay support
[ 9.120207] firewire_core: created device fw0: GUID 00c09f00003f3514,
S400
[ 9.556400] Console: switching to colour frame buffer device 128x48
[ 9.564667] fb0: inteldrmfb frame buffer device
[ 9.564670] registered panic notifier
[ 9.564683] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 9.883362] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x100-0x3af: clean.
[ 9.885034] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x3e0-0x4ff: clean.
[ 9.885750] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x820-0x8ff: clean.
[ 9.886350] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xc00-0xcf7: clean.
[ 9.887145] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xa00-0xaff: clean.
[ 9.910489] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] ->
GSI 10 (level, low) -> IRQ 10
[ 9.910516] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 10.268067] MC'97 0 converters and GPIO not ready (0x1)
[ 10.269406] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 10.269450] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 10.588141] intel8x0_measure_ac97_clock: measured 54215 usecs (2612
samples)
[ 10.588147] intel8x0: clocking to 48000
[ 11.893217] Adding 2980016k swap on /dev/sda5. Priority:-1 extents:1
across:2980016k
[ 114.815726] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
[ 114.825772] atkbd.c: Unknown key released (translated set 2, code
0xd5 on isa0060/serio0).
[ 114.825777] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
[ 115.003250] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 116.703613] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 118.571346] lib80211_crypt: registered algorithm 'CCMP'
[ 118.817644] padlock: VIA PadLock not detected.
[ 125.735906] tun: Universal TUN/TAP device driver, 1.6
[ 125.735912] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 126.768033] eth1: no IPv6 routers present
*** Protocol statistics:
Ip:
3609 total packets received
0 forwarded
0 incoming packets discarded
3608 incoming packets delivered
3691 requests sent out
840 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
273 active connections openings
0 passive connection openings
5 failed connection attempts
0 connection resets received
1 connections established
3050 segments received
3046 segments send out
64 segments retransmited
0 bad segments received.
42 resets sent
Udp:
564 packets received
0 packets to unknown port received.
0 packet receive errors
585 packets sent
UdpLite:
TcpExt:
3 packets pruned from receive queue because of socket buffer overrun
154 TCP sockets finished time wait in fast timer
61 delayed acks sent
Quick ack mode was activated 5 times
1555 packet headers predicted
475 acknowledgments not containing data payload received
6 predicted acknowledgments
12 other TCP timeouts
53 packets collapsed in receive queue due to low socket buffer
5 DSACKs sent for old packets
4 connections reset due to unexpected data
6 connections aborted due to timeout
IpExt:
InNoRoutes: 1
InMcastPkts: 9
OutMcastPkts: 11
InOctets: 2878020
OutOctets: 499779
InMcastOctets: 2426
OutMcastOctets: 2506
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 44000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at e0100c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at e0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
Latency: 64 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at e0206000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0483:1307 SGS Thomson Microelectronics Cytronix
6in1 Card Reader
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an
initramfs
ii linux-base 2.6.32-31 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-31 Binary firmware for various
driver
ii libc6-i686 2.11.2-11 Embedded GNU C Library:
Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4D8A49A0.5040801@fidoman.ru">http://lists.debian.org/4D8A49A0.5040801@fidoman.ru