Package: linux-2.6
Version: 2.6.32-30
Severity: normal
I don't have vertical or horizontal scroll but i have tapping, If iload
synaptics module from xorg.conf i have the same behavior
I have this output fron cat cat /proc/bus/input/devices,
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input8
U: Uniq=
H: Handlers=mouse1 event8
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=2e6b8b3b-d432-4cc2-ad33-dff93f73fadf ro quiet usbcore.autosuspend=1
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 5.277129] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 5.488129] [drm] radeon kernel modesetting enabled.
[ 5.488293] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.488300] radeon 0000:01:05.0: setting latency timer to 64
[ 5.491280] [drm] radeon: Initializing kernel modesetting.
[ 5.491394] [drm] register mmio base: 0x92200000
[ 5.491397] [drm] register mmio size: 65536
[ 5.498869] ATOM BIOS: HP_Garnett10
[ 5.498892] [drm] Clocks initialized !
[ 5.499357] [drm] Detected VRAM RAM=256M, BAR=256M
[ 5.499362] [drm] RAM width 32bits DDR
[ 5.499471] [TTM] Zone kernel: Available graphics memory: 898124 kiB.
[ 5.499497] [drm] radeon: 256M of VRAM memory ready
[ 5.499500] [drm] radeon: 512M of GTT memory ready.
[ 5.499547] [drm] radeon: irq initialized.
[ 5.499551] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.500464] [drm] Loading RS780 Microcode
[ 5.500469] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
[ 5.501635] Bluetooth: Core ver 2.15
[ 5.501724] NET: Registered protocol family 31
[ 5.501728] Bluetooth: HCI device and connection manager initialized
[ 5.501732] Bluetooth: HCI socket layer initialized
[ 5.502696] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 5.512724] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 5.512862] input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 5.529945] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.530220] usbcore: registered new interface driver btusb
[ 5.538347] platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
[ 5.543683] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[ 5.593423] [drm] ring test succeeded in 0 usecs
[ 5.593563] [drm] radeon: ib pool ready.
[ 5.593649] [drm] ib test succeeded in 0 usecs
[ 5.593653] [drm] Enabling audio support
[ 5.593897] [drm] Radeon Display Connectors
[ 5.593900] [drm] Connector 0:
[ 5.593903] [drm] VGA
[ 5.593907] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 5.593910] [drm] Encoders:
[ 5.593912] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.593915] [drm] Connector 1:
[ 5.593917] [drm] LVDS
[ 5.593920] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 5.593923] [drm] Encoders:
[ 5.593925] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 5.593928] [drm] Connector 2:
[ 5.593930] [drm] HDMI-A
[ 5.593931] [drm] HPD1
[ 5.593935] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 5.593937] [drm] Encoders:
[ 5.593940] [drm] DFP1: INTERNAL_UNIPHY
[ 5.740385] [drm] fb mappable at 0x80141000
[ 5.740389] [drm] vram apper at 0x80000000
[ 5.740391] [drm] size 4325376
[ 5.740393] [drm] fb depth is 24
[ 5.740396] [drm] pitch is 5632
[ 6.748147] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting
[ 6.748155] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E926 (len 498, WS 0, PS 4) @ 0xE967
[ 7.131699] Console: switching to colour frame buffer device 170x48
[ 7.147646] fb0: radeondrmfb frame buffer device
[ 7.147649] registered panic notifier
[ 7.147675] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 7.148171] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.148273] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 7.962558] Adding 4393976k swap on /dev/sda7. Priority:-1 extents:1 across:4393976k
[ 8.386683] loop: module loaded
[ 8.419982] powernow-k8: Found 1 AMD Athlon(tm) II Neo K325 Dual-Core Processor processors (2 cpu cores) (version 2.20.00)
[ 8.420068] powernow-k8: 0 : pstate 0 (1300 MHz)
[ 8.420072] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 8.420075] powernow-k8: 2 : pstate 2 (800 MHz)
[ 9.058890] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 9.073312] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 11.500738] r8169: eth0: link down
[ 11.501524] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.590128] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.016541] CPU0 attaching NULL sched-domain.
[ 20.016555] CPU1 attaching NULL sched-domain.
[ 20.044292] CPU0 attaching sched-domain:
[ 20.044302] domain 0: span 0-1 level MC
[ 20.044309] groups: 0 1
[ 20.044324] CPU1 attaching sched-domain:
[ 20.044329] domain 0: span 0-1 level MC
[ 20.044334] groups: 1 0
[ 22.808111] wlan0: direct probe to AP 00:16:b6:6b:c3:db (try 1)
[ 22.811722] wlan0: direct probe responded
[ 22.811731] wlan0: authenticate with AP 00:16:b6:6b:c3:db (try 1)
[ 22.813671] wlan0: authenticated
[ 22.813723] wlan0: associate with AP 00:16:b6:6b:c3:db (try 1)
[ 22.836937] wlan0: RX AssocResp from 00:16:b6:6b:c3:db (capab=0x411 status=0 aid=10)
[ 22.836943] wlan0: associated
[ 22.837841] Associated: True
[ 22.838392] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.925328] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 161/256 dur 1794/1504
[ 22.967194] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 137/256 dur 1602/1504
[ 23.042848] padlock: VIA PadLock not detected.
[ 23.056487] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 153/256 dur 1730/1504
[ 26.145928] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 382/256 dur 3562/1504
[ 26.159774] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 382/256 dur 3562/1504
[ 31.244763] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 130/256 dur 1546/1504
[ 33.024187] wlan0: no IPv6 routers present
[ 493.688549] wlc_recv: is_amsdu causing toss
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Pavilion dm1 Notebook PC
product_version: 0598110000243200110300100
chassis_vendor: Hewlett-Packard
chassis_version: N/A
bios_vendor: Hewlett-Packard
bios_version: F.15
board_vendor: Hewlett-Packard
board_name: 148B
board_version: 80.14
** Loaded modules:
Module Size Used by
aes_x86_64 7340 1
aes_generic 25714 1 aes_x86_64
cpufreq_conservative 5162 2
cpufreq_userspace 1992 0
powernow_k8 10978 0
loop 11799 0
snd_hda_codec_atihdmi 2251 1
btusb 9881 0
bluetooth 41827 1 btusb
snd_hda_codec_idt 42481 1
radeon 573996 2
ttm 39986 1 radeon
drm_kms_helper 20065 1 radeon
drm 142359 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 4225 1 radeon
arc4 1274 2
ecb 1841 2
uvcvideo 52063 0
videodev 29993 1 uvcvideo
v4l1_compat 11442 2 uvcvideo,videodev
v4l2_compat_ioctl32 8474 1 videodev
i2c_core 15712 5 radeon,drm_kms_helper,drm,i2c_algo_bit,videodev
snd_hda_intel 20019 1
snd_hda_codec 54244 3 snd_hda_codec_atihdmi,snd_hda_codec_idt,snd_hda_in tel
snd_hwdep 5380 1 snd_hda_codec
joydev 8459 0
snd_pcm 60503 2 snd_hda_intel,snd_hda_codec
snd_seq 42881 0
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 1 snd_seq
shpchp 26264 0
edac_core 29261 0
ohci_hcd 19212 0
snd 46446 10 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_ hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
edac_mce_amd 6433 0
soundcore 4598 1 snd
hp_accel 11056 0
pci_hotplug 21203 1 shpchp
ehci_hcd 31151 0
brcm80211 622707 0
usbcore 122034 5 btusb,uvcvideo,ohci_hcd,ehci_hcd
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
lis3lv02d 5173 1 hp_accel
psmouse 49777 0
mac80211 137340 1 brcm80211
input_polldev 1967 1 lis3lv02d
nls_base 6377 1 usbcore
video 17445 0
r8169 29229 0
mii 3210 1 r8169
cfg80211 101496 2 brcm80211,mac80211
rfkill 13044 3 bluetooth,cfg80211
wmi 4323 0
output 1692 1 video
led_class 2433 1 hp_accel
evdev 7352 15
serio_raw 3752 0
battery 4998 0
ac 2192 0
button 4650 0
processor 29935 1 powernow_k8
ext4 289033 3
mbcache 5050 1 ext4
jbd2 67015 1 ext4
crc16 1319 1 ext4
sd_mod 29889 5
crc_t10dif 1276 1 sd_mod
ahci 32374 4
libata 133632 1 ahci
thermal 11674 0
thermal_sys 11942 3 video,processor,thermal
scsi_mod 122149 2 sd_mod,libata
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 78:ac:c0:47:f3:57 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether e0:2a:82:44:76:54 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.101/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::e22a:82ff:fe44:7654/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 263887 201 0 0 0 0 0 0 15270 156 0 0 0 0 0 0
*** Protocol statistics:
Ip:
195 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
193 incoming packets delivered
142 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
4 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
185 segments received
133 segments send out
1 segments retransmited
0 bad segments received.
3 resets sent
Udp:
8 packets received
0 packets to unknown port received.
0 packet receive errors
8 packets sent
UdpLite:
TcpExt:
4 TCP sockets finished time wait in fast timer
7 delayed acks sent
167 packet headers predicted
5 acknowledgments not containing data payload received
1 congestion windows recovered without slow start after partial ack
1 other TCP timeouts
IpExt:
InOctets: 260513
OutOctets: 8450
*** Device features:
eth0: 0x180
lo: 0x13865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601]
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: 92100000-922fffff
Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 7038 [size=8]
Region 1: I/O ports at 704c [size=4]
Region 2: I/O ports at 7030 [size=8]
Region 3: I/O ports at 7048 [size=4]
Region 4: I/O ports at 7010 [size=16]
Region 5: Memory at 92308000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 92307000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at 92308600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 92306000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at 92308500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at 92300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 92305000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00002000-00005fff
Memory behind bridge: 91100000-920fffff
Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.1 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a1] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: 91000000-910fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 92304000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at 92308400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc M880G [Mobility Radeon HD 4200] [1002:9712] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 6000 [size=256]
Region 2: Memory at 92200000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at 92100000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] [1002:970f]
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at 92210000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at 90010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at 90000000 (64-bit, prefetchable) [size=64K]
Expansion ROM at 90020000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
09:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1483]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 91000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcm80211
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0a5c:21b4 Broadcom Corp.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 064e:f100 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_SV.utf8, LC_CTYPE=es_SV.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=120013
B: KEY=20000 20 0 0 500f02100003 3803078f900d401 feffffdfffefffff ffffffffffffffff
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
U: Uniq=
H: Handlers=event4
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="ST LIS3LV02DL Accelerometer"
P: Phys=lis3lv02d/input0
S: Sysfs=/devices/platform/lis3lv02d/input/input7
U: Uniq=
H: Handlers=event7 js0
B: EV=9
B: ABS=7
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input8
U: Uniq=
H: Handlers=mouse1 event8
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0003 Vendor=064e Product=f100 Version=0200
N: Name="HP Webcam-50"
P: Phys=usb-0000:00:12.2-4/button
S: Sysfs=/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input9
U: Uniq=
H: Handlers=kbd event9
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0001 Vendor=111d Product=7605 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:14.2/input/input10
U: Uniq=
H: Handlers=kbd event10
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA ATI SB Mic at Ext Front Jack"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input11
U: Uniq=
H: Handlers=event11
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA ATI SB HP Out at Ext Front Jack"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input12
U: Uniq=
H: Handlers=event12
B: EV=21
B: SW=4
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=2e6b8b3b-d432-4cc2-ad33-dff93f73fadf ro quiet usbcore.autosuspend=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006e446000 (usable)
[ 0.000000] BIOS-e820: 000000006e446000 - 000000006e646000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006e646000 - 000000006fd3f000 (usable)
[ 0.000000] BIOS-e820: 000000006fd3f000 - 000000006fdbf000 (reserved)
[ 0.000000] BIOS-e820: 000000006fdbf000 - 000000006febf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006febf000 - 000000006fef6000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006fef6000 - 000000006ff00000 (usable)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000f9000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x6ff00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
[ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 000060000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000006ff00000
[ 0.000000] 0000000000 - 0040000000 page 1G
[ 0.000000] 0040000000 - 006fe00000 page 2M
[ 0.000000] 006fe00000 - 006ff00000 page 4k
[ 0.000000] kernel direct mapping tables up to 6ff00000 @ 8000-b000
[ 0.000000] RAMDISK: 37d50000 - 37fef005
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 000000006fef5120 0005C (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 000000006fef4000 000F4 (v04 HP 148B 00000003 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000006fee3000 0D2F0 (v01 HP 148B F0000000 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000006fe9c000 00040
[ 0.000000] ACPI: HPET 000000006fef3000 00038 (v01 HP 148B 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000006fef2000 00084 (v02 HP 148B 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000006fef1000 0003C (v01 HP 148B 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 000000006fee2000 00028 (v01 HP 148B 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000006fee1000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000006fee0000 00386 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000006ff00000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000006ff00000
[ 0.000000] NODE_DATA [000000000000a000 - 0000000000011fff]
[ 0.000000] bootmap [0000000000012000 - 000000000001ffdf] pages e
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 006ff00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a414] TEXT DATA BSS ==> [0001000000 - 000168a414]
[ 0.000000] #3 [0037d50000 - 0037fef005] RAMDISK ==> [0037d50000 - 0037fef005]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b26d] BRK ==> [000168b000 - 000168b26d]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880001c00000-ffff8800035fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0006e446
[ 0.000000] 0: 0x0006e646 -> 0x0006fd3f
[ 0.000000] 0: 0x0006fef6 -> 0x0006ff00
[ 0.000000] On node 0 totalpages: 457448
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3842 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6213 pages used for memmap
[ 0.000000] DMA32 zone: 447236 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000006e446000 - 000000006e646000
[ 0.000000] PM: Registered nosave memory: 000000006fd3f000 - 000000006fdbf000
[ 0.000000] PM: Registered nosave memory: 000000006fdbf000 - 000000006febf000
[ 0.000000] PM: Registered nosave memory: 000000006febf000 - 000000006fef6000
[ 0.000000] Allocating PCI resources starting at 6ff00000 (gap: 6ff00000:88100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 451078
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=2e6b8b3b-d432-4cc2-ad33-dff93f73fadf ro quiet usbcore.autosuspend=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 7de000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1792968k/1833984k available (3079k kernel code, 4192k absent, 36824k reserved, 1892k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1296.759 MHz processor.
[ 0.008008] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.51 BogoMIPS (lpj=5187028)
[ 0.008038] Security Framework initialized
[ 0.008045] SELinux: Disabled at boot.
[ 0.008295] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009423] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.009944] Mount-cache hash table entries: 256
[ 0.010128] Initializing cgroup subsys ns
[ 0.010133] Initializing cgroup subsys cpuacct
[ 0.010138] Initializing cgroup subsys devices
[ 0.010142] Initializing cgroup subsys freezer
[ 0.010145] Initializing cgroup subsys net_cls
[ 0.010175] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.010179] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.010182] CPU 0/0x0 -> Node 0
[ 0.010187] tseg: 006ff00000
[ 0.010190] CPU: Physical Processor ID: 0
[ 0.010192] CPU: Processor Core ID: 0
[ 0.010196] mce: CPU supports 6 MCE banks
[ 0.010209] using C1E aware idle routine
[ 0.010212] Performance Events: AMD PMU driver.
[ 0.010219] ... version: 0
[ 0.010221] ... bit width: 48
[ 0.010224] ... generic registers: 4
[ 0.010226] ... value mask: 0000ffffffffffff
[ 0.010229] ... max period: 00007fffffffffff
[ 0.010232] ... fixed-purpose events: 0
[ 0.010235] ... event mask: 000000000000000f
[ 0.011386] ACPI: Core revision 20090903
[ 0.032094] Setting APIC routing to flat
[ 0.032445] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.075015] CPU0: AMD Athlon(tm) II Neo K325 Dual-Core Processor stepping 03
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.012000] CPU 1/0x1 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.160054] CPU1: AMD Athlon(tm) II Neo K325 Dual-Core Processor stepping 03
[ 0.160064] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164019] Brought up 2 CPUs
[ 0.164023] Total of 2 processors activated (5187.05 BogoMIPS).
[ 0.164027] System has AMD C1E enabled
[ 0.164050] Switch to broadcast mode on CPU1
[ 0.164361] CPU0 attaching sched-domain:
[ 0.164366] domain 0: span 0-1 level MC
[ 0.164370] groups: 0 1
[ 0.164378] CPU1 attaching sched-domain:
[ 0.164381] domain 0: span 0-1 level MC
[ 0.164384] groups: 1 0
[ 0.164476] Switch to broadcast mode on CPU0
[ 0.164476] devtmpfs: initialized
[ 0.169150] regulator: core version 0.5
[ 0.169150] NET: Registered protocol family 16
[ 0.169150] node 0 link 0: io port [0, ffffff]
[ 0.169150] TOM: 0000000080000000 aka 2048M
[ 0.169150] Fam 10h mmconf [f8000000, fbffffff]
[ 0.169150] node 0 link 0: mmio [a0000, bffff]
[ 0.169150] node 0 link 0: mmio [80000000, 8fffffff]
[ 0.169150] node 0 link 0: mmio [90000000, 920fffff]
[ 0.169150] node 0 link 0: mmio [92100000, 922fffff]
[ 0.169150] node 0 link 0: mmio [92300000, f7ffffff]
[ 0.169150] node 0 link 0: mmio [f8000000, fbffffff] ==> none
[ 0.169150] node 0 link 0: mmio [fc000000, ffdfffff]
[ 0.169150] bus: [00,1f] on node 0 link 0
[ 0.169150] bus: 00 index 0 io port: [0, ffff]
[ 0.169150] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.169150] bus: 00 index 2 mmio: [80000000, f7ffffff]
[ 0.169150] bus: 00 index 3 mmio: [fc000000, fcffffffff]
[ 0.169150] ACPI: bus type pci registered
[ 0.169150] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.169150] PCI: MCFG area at f8000000 reserved in E820
[ 0.169150] PCI: updated MCFG configuration 0: base f8000000 segment 0 buses 0 - 15
[ 0.169178] PCI: Using MMCONFIG at f8000000 - f8ffffff
[ 0.169180] PCI: Using configuration type 1 for base access
[ 0.169248] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.169250] mtrr: probably your BIOS does not setup all CPUs.
[ 0.169252] mtrr: corrected configuration.
[ 0.169590] bio: create slab <bio-0> at 0
[ 0.173274] ACPI: EC: Look up EC in DSDT
[ 0.175058] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.181064] ACPI: BIOS _OSI(Linux) query ignored
[ 0.196232] ACPI: Interpreter enabled
[ 0.196232] ACPI: (supports S0 S3 S4 S5)
[ 0.196232] ACPI: Using IOAPIC for interrupt routing
[ 0.208835] ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
[ 0.208846] ACPI: No dock devices found.
[ 0.210275] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.210492] pci 0000:00:11.0: reg 10 io port: [0x7038-0x703f]
[ 0.210501] pci 0000:00:11.0: reg 14 io port: [0x704c-0x704f]
[ 0.210510] pci 0000:00:11.0: reg 18 io port: [0x7030-0x7037]
[ 0.210518] pci 0000:00:11.0: reg 1c io port: [0x7048-0x704b]
[ 0.210527] pci 0000:00:11.0: reg 20 io port: [0x7010-0x701f]
[ 0.210536] pci 0000:00:11.0: reg 24 32bit mmio: [0x92308000-0x923083ff]
[ 0.210608] pci 0000:00:12.0: reg 10 32bit mmio: [0x92307000-0x92307fff]
[ 0.210690] pci 0000:00:12.2: reg 10 32bit mmio: [0x92308600-0x923086ff]
[ 0.210746] pci 0000:00:12.2: supports D1 D2
[ 0.210750] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.210755] pci 0000:00:12.2: PME# disabled
[ 0.210794] pci 0000:00:13.0: reg 10 32bit mmio: [0x92306000-0x92306fff]
[ 0.210875] pci 0000:00:13.2: reg 10 32bit mmio: [0x92308500-0x923085ff]
[ 0.210932] pci 0000:00:13.2: supports D1 D2
[ 0.210935] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.210940] pci 0000:00:13.2: PME# disabled
[ 0.211050] pci 0000:00:14.2: reg 10 64bit mmio: [0x92300000-0x92303fff]
[ 0.211097] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.211102] pci 0000:00:14.2: PME# disabled
[ 0.211220] pci 0000:00:14.5: reg 10 32bit mmio: [0x92305000-0x92305fff]
[ 0.211332] pci 0000:00:15.0: supports D1 D2
[ 0.211417] pci 0000:00:15.1: supports D1 D2
[ 0.211461] pci 0000:00:16.0: reg 10 32bit mmio: [0x92304000-0x92304fff]
[ 0.211542] pci 0000:00:16.2: reg 10 32bit mmio: [0x92308400-0x923084ff]
[ 0.211598] pci 0000:00:16.2: supports D1 D2
[ 0.211601] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.211607] pci 0000:00:16.2: PME# disabled
[ 0.211801] pci 0000:01:05.0: reg 10 32bit mmio pref: [0x80000000-0x8fffffff]
[ 0.211807] pci 0000:01:05.0: reg 14 io port: [0x6000-0x60ff]
[ 0.211814] pci 0000:01:05.0: reg 18 32bit mmio: [0x92200000-0x9220ffff]
[ 0.211824] pci 0000:01:05.0: reg 24 32bit mmio: [0x92100000-0x921fffff]
[ 0.211842] pci 0000:01:05.0: supports D1 D2
[ 0.211869] pci 0000:01:05.1: reg 10 32bit mmio: [0x92210000-0x92213fff]
[ 0.211898] pci 0000:01:05.1: supports D1 D2
[ 0.211949] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
[ 0.211953] pci 0000:00:01.0: bridge 32bit mmio: [0x92100000-0x922fffff]
[ 0.212011] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x8fffffff]
[ 0.212075] pci 0000:00:14.4: transparent bridge
[ 0.212144] pci 0000:03:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.212173] pci 0000:03:00.0: reg 18 64bit mmio pref: [0x90010000-0x90010fff]
[ 0.212195] pci 0000:03:00.0: reg 20 64bit mmio pref: [0x90000000-0x9000ffff]
[ 0.212231] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff]
[ 0.212283] pci 0000:03:00.0: supports D1 D2
[ 0.212286] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.212297] pci 0000:03:00.0: PME# disabled
[ 0.260207] pci 0000:00:15.0: bridge io port: [0x2000-0x5fff]
[ 0.260215] pci 0000:00:15.0: bridge 32bit mmio: [0x91100000-0x920fffff]
[ 0.260224] pci 0000:00:15.0: bridge 64bit mmio pref: [0x90000000-0x90ffffff]
[ 0.260310] pci 0000:09:00.0: reg 10 64bit mmio: [0x91000000-0x91003fff]
[ 0.260401] pci 0000:09:00.0: supports D1 D2
[ 0.272163] pci 0000:00:15.1: bridge 32bit mmio: [0x91000000-0x910fffff]
[ 0.272217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.272651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.272818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
[ 0.272970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
[ 0.273192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.294868] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.295219] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.295545] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.295928] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.296276] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.296530] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.296819] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.297082] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.297301] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.297307] vgaarb: loaded
[ 0.300095] PCI: Using ACPI for IRQ routing
[ 0.300458] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.300465] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.302512] Switching to clocksource tsc
[ 0.305337] pnp: PnP ACPI init
[ 0.305354] ACPI: bus type pnp registered
[ 0.309236] alloc irq_desc for 22 on node 0
[ 0.309239] alloc kstat_irqs on node 0
[ 0.310613] pnp: PnP ACPI: found 12 devices
[ 0.310618] ACPI: ACPI bus type pnp unregistered
[ 0.310646] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.310651] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.310656] system 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved
[ 0.310661] system 00:01: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.310665] system 00:01: iomem range 0xfed80000-0xfed80fff has been reserved
[ 0.310670] system 00:01: iomem range 0xf8900000-0xf8900fff has been reserved
[ 0.310684] system 00:09: ioport range 0x400-0x4cf has been reserved
[ 0.310689] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.310692] system 00:09: ioport range 0x4d6-0x4d6 has been reserved
[ 0.310696] system 00:09: ioport range 0x550-0x550 has been reserved
[ 0.310709] system 00:09: ioport range 0x680-0x6ff has been reserved
[ 0.310713] system 00:09: ioport range 0x77a-0x77a has been reserved
[ 0.310717] system 00:09: ioport range 0xc00-0xc01 has been reserved
[ 0.310721] system 00:09: ioport range 0xc14-0xc14 has been reserved
[ 0.310725] system 00:09: ioport range 0xc50-0xc52 has been reserved
[ 0.310729] system 00:09: ioport range 0xc6c-0xc6c has been reserved
[ 0.310733] system 00:09: ioport range 0xc6f-0xc6f has been reserved
[ 0.310737] system 00:09: ioport range 0xcd0-0xcdb has been reserved
[ 0.310740] system 00:09: ioport range 0x380-0x387 has been reserved
[ 0.310750] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 0.310754] system 00:0a: iomem range 0xffe00000-0xffffffff has been reserved
[ 0.315925] pci 0000:03:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
[ 0.316012] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.316016] pci 0000:00:01.0: IO window: 0x6000-0x6fff
[ 0.316021] pci 0000:00:01.0: MEM window: 0x92100000-0x922fffff
[ 0.316026] pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x0000008fffffff
[ 0.316032] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[ 0.316035] pci 0000:00:14.4: IO window: disabled
[ 0.316041] pci 0000:00:14.4: MEM window: disabled
[ 0.316046] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.316057] pci 0000:00:15.0: PCI bridge, secondary bus 0000:03
[ 0.316061] pci 0000:00:15.0: IO window: 0x2000-0x5fff
[ 0.316067] pci 0000:00:15.0: MEM window: 0x91100000-0x920fffff
[ 0.316073] pci 0000:00:15.0: PREFETCH window: 0x00000090000000-0x00000090ffffff
[ 0.316081] pci 0000:00:15.1: PCI bridge, secondary bus 0000:09
[ 0.316083] pci 0000:00:15.1: IO window: disabled
[ 0.316089] pci 0000:00:15.1: MEM window: 0x91000000-0x910fffff
[ 0.316094] pci 0000:00:15.1: PREFETCH window: disabled
[ 0.316109] pci 0000:00:01.0: setting latency timer to 64
[ 0.316128] alloc irq_desc for 16 on node 0
[ 0.316130] alloc kstat_irqs on node 0
[ 0.316140] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.316146] pci 0000:00:15.0: setting latency timer to 64
[ 0.316156] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.316161] pci 0000:00:15.1: setting latency timer to 64
[ 0.316167] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.316171] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.316175] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff]
[ 0.316179] pci_bus 0000:01: resource 1 mem: [0x92100000-0x922fffff]
[ 0.316183] pci_bus 0000:01: resource 2 pref mem [0x80000000-0x8fffffff]
[ 0.316186] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.316190] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.316194] pci_bus 0000:03: resource 0 io: [0x2000-0x5fff]
[ 0.316197] pci_bus 0000:03: resource 1 mem: [0x91100000-0x920fffff]
[ 0.316201] pci_bus 0000:03: resource 2 pref mem [0x90000000-0x90ffffff]
[ 0.316205] pci_bus 0000:09: resource 1 mem: [0x91000000-0x910fffff]
[ 0.316254] NET: Registered protocol family 2
[ 0.316431] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.317381] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.319681] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.320275] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.320279] TCP reno registered
[ 0.320423] NET: Registered protocol family 1
[ 0.528033] pci 0000:01:05.0: Boot video device
[ 0.528121] Unpacking initramfs...
[ 0.610448] Freeing initrd memory: 2684k freed
[ 0.613053] Simple Boot Flag at 0x44 set to 0x1
[ 0.613527] audit: initializing netlink socket (disabled)
[ 0.613543] type=2000 audit(1300128024.611:1): initialized
[ 0.618659] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.620776] VFS: Disk quotas dquot_6.5.2
[ 0.620866] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.620977] msgmni has been set to 3507
[ 0.621368] alg: No test for stdrng (krng)
[ 0.621501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.621507] io scheduler noop registered
[ 0.621510] io scheduler anticipatory registered
[ 0.621513] io scheduler deadline registered
[ 0.621562] io scheduler cfq registered (default)
[ 0.621899] alloc irq_desc for 24 on node 0
[ 0.621904] alloc kstat_irqs on node 0
[ 0.621922] pcieport 0000:00:15.0: irq 24 for MSI/MSI-X
[ 0.621933] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.622223] alloc irq_desc for 25 on node 0
[ 0.622226] alloc kstat_irqs on node 0
[ 0.622236] pcieport 0000:00:15.1: irq 25 for MSI/MSI-X
[ 0.622246] pcieport 0000:00:15.1: setting latency timer to 64
[ 0.624389] Linux agpgart interface v0.103
[ 0.624453] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.624966] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.625040] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.640887] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.640896] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.641030] mice: PS/2 mouse device common for all mice
[ 0.641094] rtc_cmos 00:05: RTC can wake from S4
[ 0.641137] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.641166] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.641181] cpuidle: using governor ladder
[ 0.641184] cpuidle: using governor menu
[ 0.641190] No iBFT detected.
[ 0.641648] TCP cubic registered
[ 0.641803] NET: Registered protocol family 10
[ 0.642439] lo: Disabled Privacy Extensions
[ 0.642849] Mobile IPv6
[ 0.642853] NET: Registered protocol family 17
[ 0.642945] PM: Resume from disk failed.
[ 0.642959] registered taskstats version 1
[ 0.643559] rtc_cmos 00:05: setting system clock to 2011-03-14 18:40:25 UTC (1300128025)
[ 0.643627] Initalizing network drop monitor service
[ 0.643681] Freeing unused kernel memory: 592k freed
[ 0.643975] Write protecting the kernel read-only data: 4236k
[ 0.661727] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.674551] udev[84]: starting version 164
[ 0.830965] SCSI subsystem initialized
[ 0.835043] ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386)
[ 0.854582] libata version 3.00 loaded.
[ 0.859153] ahci 0000:00:11.0: version 3.0
[ 0.859240] alloc irq_desc for 19 on node 0
[ 0.859243] alloc kstat_irqs on node 0
[ 0.859255] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.859302] alloc irq_desc for 26 on node 0
[ 0.859304] alloc kstat_irqs on node 0
[ 0.859318] ahci 0000:00:11.0: irq 26 for MSI/MSI-X
[ 0.859382] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.859389] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.859643] scsi0 : ahci
[ 0.859799] ata1: SATA max UDMA/133 abar m1024@0x92308000 port 0x92308100 irq 26
[ 1.288161] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.288533] ata1.00: ATA-8: TOSHIBA MK3261GSYN, MH000C, max UDMA/100
[ 1.288540] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.289055] ata1.00: configured for UDMA/100
[ 1.304309] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3261GS MH00 PQ: 0 ANSI: 5
[ 1.312659] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.312729] sd 0:0:0:0: [sda] Write Protect is off
[ 1.312733] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.312763] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.312939] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
[ 1.425182] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.060758] PM: Starting manual resume from disk
[ 2.060764] PM: Resume from partition 8:7
[ 2.060767] PM: Checking hibernation image.
[ 2.061051] PM: Error -22 checking image file
[ 2.061056] PM: Resume from disk failed.
[ 2.141563] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.098263] udev[386]: starting version 164
[ 3.324143] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 3.324154] ACPI: Power Button [PWRB]
[ 3.324242] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 3.324248] ACPI: Sleep Button [SLPB]
[ 3.324355] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 3.324882] ACPI: Lid Switch [LID]
[ 3.326708] ACPI: processor limited to max C-state 1
[ 3.326784] processor LNXCPU:00: registered as cooling_device0
[ 3.326926] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.326936] ACPI: Power Button [PWRF]
[ 3.327389] processor LNXCPU:01: registered as cooling_device1
[ 3.389815] ACPI: AC Adapter [ACAD] (on-line)
[ 3.440339] ACPI: Battery Slot [BAT0] (battery present)
[ 3.449937] ACPI: WMI: Mapper loaded
[ 3.594993] cfg80211: Using static regulatory domain info
[ 3.594997] cfg80211: Regulatory domain: US
[ 3.595000] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.595005] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 3.595009] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.595012] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.595016] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.595019] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.595023] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 3.595037] cfg80211: Calling CRDA for country: US
[ 3.623290] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.623330] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.623385] r8169 0000:03:00.0: setting latency timer to 64
[ 3.623438] alloc irq_desc for 27 on node 0
[ 3.623442] alloc kstat_irqs on node 0
[ 3.623462] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 3.624301] eth0: RTL8102e at 0xffffc9000037e000, 78:ac:c0:47:f3:57, XID 04e00000 IRQ 27
[ 3.709235] acpi device:03: registered as cooling_device2
[ 3.709599] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
[ 3.709664] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.879567] usbcore: registered new interface driver usbfs
[ 3.879607] usbcore: registered new interface driver hub
[ 3.879735] usbcore: registered new device driver usb
[ 4.159045] brcm80211: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.169037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.169198] alloc irq_desc for 17 on node 0
[ 4.169201] alloc kstat_irqs on node 0
[ 4.169214] brcm80211 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.169224] brcm80211 0000:09:00.0: setting latency timer to 64
[ 4.169263] brcm80211 0000:09:00.0: firmware: requesting brcm/bcm43xx-0.fw
[ 4.169364] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.169379] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 4.169384] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 4.169417] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 4.169497] ehci_hcd 0000:00:12.2: debug port 1
[ 4.169528] ehci_hcd 0000:00:12.2: irq 17, io mem 0x92308600
[ 4.174944] lis3lv02d: laptop model unknown, using default axes configuration
[ 4.175969] lis3lv02d: 1-byte sensor found
[ 4.182435] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.184111] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 4.184157] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.184161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.184166] usb usb1: Product: EHCI Host Controller
[ 4.184169] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 4.184172] usb usb1: SerialNumber: 0000:00:12.2
[ 4.184305] usb usb1: configuration #1 chosen from 1 choice
[ 4.184350] hub 1-0:1.0: USB hub found
[ 4.184364] hub 1-0:1.0: 5 ports detected
[ 4.184687] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.184718] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 4.184723] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.184736] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 4.184780] ehci_hcd 0000:00:13.2: debug port 1
[ 4.184800] ehci_hcd 0000:00:13.2: irq 17, io mem 0x92308500
[ 4.191564] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 4.191696] Registered led device: hp::hddprotect
[ 4.191723] lis3lv02d driver loaded.
[ 4.200146] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.200194] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.200198] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.200202] usb usb2: Product: EHCI Host Controller
[ 4.200204] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 4.200207] usb usb2: SerialNu
Bug#618422: linux-image-2.6.32-5-amd64: HP DM1-2160la with ALPS toucpad wasn't detect very well
