FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 03-13-2011, 12:55 AM
Matteo Settenvini
 
Default Bug#617976: uvcvideo: Failed to resubmit video URB (-27) after resume from suspend

Package: linux-2.6
Version: 2.6.37-2-amd64
Severity: normal

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1



*** reportbug-uvcvideo
Subject: "uvcvideo: Failed to resubmit video URB (-27)" after resume
Package: linux-2.6
Version: 2.6.37-2-amd64
Severity: normal

I'm using the suspend/resume functionality quite a lot lately, especially since
it was made prominent by the new GNOME Shell, and when resuming my webcam stops
working.
I blame this to a crash in ehci_hcd, since the webcam is listed at 12.2 and irq
17 is at 12.2 too, but I'm not sure.
Here there are some parts of my dmesg I think are relevant. A complete dump is
attached.

Thanks for any help,
Matteo

BEFORE SUSPEND:
======================
[ 2.685017] usb 1-3: New USB device found, idVendor=04f2, idProduct=a13d
[ 2.685019] usb 1-3: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[ 2.685021] usb 1-3: Product: HP Prem AF Webcam KQ245AA
[ 2.685022] usb 1-3: Manufacturer: HP Prem AF Webcam KQ245AA
[ 2.912052] usb 2-5: new high speed USB device using ehci_hcd and address 4

....

[ 3.244964] input: HP Prem AF Webcam KQ245AA HP Prem AF Webcam KQ245AA as
/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.4/input/input0
[ 3.245010] Initializing USB Mass Storage driver...
[ 3.245017] generic-usb 0003:04F2:A13D.0001: input,hidraw0: USB HID v1.11
Joystick [HP Prem AF Webcam KQ245AA HP Prem AF Webcam KQ245AA] on
usb-0000:00:12.2-3/input4
[ 3.245033] usbcore: registered new interface driver usbhid
[ 3.245034] usbhid: USB HID core driver

....

[ 6.858340] Linux video capture interface: v2.00
[ 6.870334] uvcvideo: Found UVC 1.00 device HP Prem AF Webcam KQ245AA
(04f2:a13d)
[ 6.877441] input: HP Prem AF Webcam KQ245AA as
/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input7
[ 6.877486] usbcore: registered new interface driver uvcvideo
[ 6.877487] USB Video Class driver (v1.0.0)

======================


AFTER RESUME:
======================

[16934.404075] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfe02c000-0xfe02c0ff]
(PCI address [0xfe02c000-0xfe02c0ff])
[16934.404103] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was
0x2b00000, writing 0x2b00012)
[16934.420137] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfe029000-0xfe0290ff]
(PCI address [0xfe029000-0xfe0290ff])
[16934.420165] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was
0x2b00000, writing 0x2b00012)

....

[16934.424680] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[16934.424722] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[16934.424764] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[16934.424781] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[16934.424800] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[16934.424802] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19

....

[16934.980061] firewire_core: rediscovered device fw0
[16935.028350] irq 17: nobody cared (try booting with the "irqpoll" option)
[16935.028353] Pid: 0, comm: swapper Not tainted 2.6.37-2-amd64 #1
[16935.028354] Call Trace:
[16935.028355] <IRQ> [<ffffffff8109313d>] ? __report_bad_irq+0x30/0x80
[16935.028362] [<ffffffff810932b4>] ? note_interrupt+0x127/0x19f
[16935.028365] [<ffffffff8100f6dd>] ? sched_clock+0x5/0x8
[16935.028367] [<ffffffff81093c93>] ? handle_fasteoi_irq+0xcc/0xf7
[16935.028369] [<ffffffff8100bf50>] ? handle_irq+0x17/0x1f
[16935.028371] [<ffffffff8100b60b>] ? do_IRQ+0x50/0xb5
[16935.028374] [<ffffffff8131eed3>] ? ret_from_intr+0x0/0x11
[16935.028375] <EOI> [<ffffffff81028108>] ? native_safe_halt+0x2/0x3
[16935.028379] [<ffffffff81010b4f>] ? default_idle+0x39/0x57
[16935.028380] [<ffffffff81010c44>] ? c1e_idle+0xd7/0xfd
[16935.028382] [<ffffffff81008bcb>] ? cpu_idle+0xb2/0x124
[16935.028385] [<ffffffff8169ad5d>] ? start_kernel+0x3c9/0x3d4
[16935.028387] [<ffffffff8169a3cd>] ? x86_64_start_kernel+0x107/0x114
[16935.028388] handlers:
[16935.028389] [<ffffffffa0081c4d>] (usb_hcd_irq+0x0/0x75 [usbcore])
[16935.028406] Disabling IRQ #17

....

[17069.256189] uvcvideo: Failed to resubmit video URB (-27).
[17069.256206] uvcvideo: Failed to resubmit video URB (-27).
[17069.256220] uvcvideo: Failed to resubmit video URB (-27).
[17069.256234] uvcvideo: Failed to resubmit video URB (-27).
[17069.256247] uvcvideo: Failed to resubmit video URB (-27).

======================



- -- System Information:
Debian Release: wheezy/sid
APT prefers experimental
APT policy: (800, 'experimental'), (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.37-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)

iEYEARECAAYFAk18I/MACgkQUDehq0srSdYPiQCfWStyn8fsjTJR9EVmca0xckDA
zZgAn3mKcNIVG4te5RAFyseS1oFsoJxS
=3FXB
-----END PGP SIGNATURE-----
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37-2-amd64 (Debian 2.6.37-2) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-12) ) #1 SMP Sun Feb 27 10:12:22 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-2-amd64 root=UUID=df3d3abb-8ec5-470d-9407-8bff014bc0c6 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-790FXTA-UD5/GA-790FXTA-UD5, BIOS F3j 10/15/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFF80000000 write-back
[ 0.000000] 5 base 000180000000 mask FFFFE0000000 write-back
[ 0.000000] 6 base 0001A0000000 mask FFFFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f47e0] f47e0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
[ 0.000000] 0100000000 - 0180000000 page 1G
[ 0.000000] 0180000000 - 01b0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b0000000 @ cfede000-cfee0000
[ 0.000000] RAMDISK: 36b8e000 - 375bf000
[ 0.000000] ACPI: RSDP 00000000000f61f0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee30c0 076C7 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: SSDT 00000000cfeea880 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000cfeeb140 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfeeb180 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cfeea7c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001b0000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001b0000000
[ 0.000000] NODE_DATA [00000001afffb000 - 00000001afffffff]
[ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff8801a9e00000-ffff8801af3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572463
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s82688 r8192 d23808 u262144
[ 0.000000] pcpu-alloc: s82688 r8192 d23808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1548265
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-2-amd64 root=UUID=df3d3abb-8ec5-470d-9407-8bff014bc0c6 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 6050396k/7077888k available (3227k kernel code, 788036k absent, 239456k reserved, 3441k data, 608k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3415.253 MHz processor.
[ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6830.50 BogoMIPS (lpj=13661012)
[ 0.008010] pid_max: default: 32768 minimum: 301
[ 0.008024] Security Framework initialized
[ 0.008027] SELinux: Disabled at boot.
[ 0.008522] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013712] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014894] Mount-cache hash table entries: 256
[ 0.014993] Initializing cgroup subsys ns
[ 0.014995] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.014997] Initializing cgroup subsys cpuacct
[ 0.015000] Initializing cgroup subsys devices
[ 0.015001] Initializing cgroup subsys freezer
[ 0.015003] Initializing cgroup subsys net_cls
[ 0.015005] Initializing cgroup subsys blkio
[ 0.015027] tseg: 00cff00000
[ 0.015028] CPU: Physical Processor ID: 0
[ 0.015029] CPU: Processor Core ID: 0
[ 0.015031] mce: CPU supports 6 MCE banks
[ 0.015037] using C1E aware idle routine
[ 0.015038] Performance Events: AMD PMU driver.
[ 0.015042] ... version: 0
[ 0.015043] ... bit width: 48
[ 0.015044] ... generic registers: 4
[ 0.015045] ... value mask: 0000ffffffffffff
[ 0.015046] ... max period: 00007fffffffffff
[ 0.015047] ... fixed-purpose events: 0
[ 0.015048] ... event mask: 000000000000000f
[ 0.015535] ACPI: Core revision 20101013
[ 0.024061] Setting APIC routing to flat
[ 0.024526] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064726] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
[ 0.068000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068000] Booting Node 0, Processors #1
[ 0.156009] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156022] System has AMD C1E enabled
[ 0.156036] Switch to broadcast mode on CPU1
[ 0.156055] #2
[ 0.248013] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.248027] Switch to broadcast mode on CPU2
[ 0.248060] #3
[ 0.340019] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.340034] Brought up 4 CPUs
[ 0.340036] Total of 4 processors activated (27321.04 BogoMIPS).
[ 0.340032] Switch to broadcast mode on CPU3
[ 0.341771] Switch to broadcast mode on CPU0
[ 0.341771] devtmpfs: initialized
[ 0.345783] regulator: core version 0.5
[ 0.345783] regulator: dummy:
[ 0.345783] NET: Registered protocol family 16
[ 0.345783] node 0 link 0: io port [8000, ffff]
[ 0.345783] TOM: 00000000d0000000 aka 3328M
[ 0.345783] Fam 10h mmconf [e0000000, e00fffff]
[ 0.345783] node 0 link 0: mmio [a0000, bffff]
[ 0.345783] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.345783] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.345783] node 0 link 0: mmio [e0000000, e07fffff] ==> [e0100000, e07fffff]
[ 0.345783] TOM2: 00000001b0000000 aka 6912M
[ 0.345783] bus: [00, 07] on node 0 link 0
[ 0.345783] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.345783] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.345783] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.345783] bus: 00 index 3 [mem 0xe0800000-0xffffffff]
[ 0.345783] bus: 00 index 4 [mem 0xe0100000-0xe07fffff]
[ 0.345783] bus: 00 index 5 [mem 0x1b0000000-0xfcffffffff]
[ 0.345783] ACPI: bus type pci registered
[ 0.345783] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.345783] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.363573] PCI: Using configuration type 1 for base access
[ 0.363805] bio: create slab <bio-0> at 0
[ 0.364397] ACPI: EC: Look up EC in DSDT
[ 0.370073] ACPI: Interpreter enabled
[ 0.370077] ACPI: (supports S0 S3 S4 S5)
[ 0.370091] ACPI: Using IOAPIC for interrupt routing
[ 0.428020] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[ 0.448020] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[ 0.468020] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[ 0.469104] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[ 0.469419] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[ 0.469464] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[ 0.469607] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[ 0.469702] ACPI: No dock devices found.
[ 0.469705] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.469770] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.469897] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.469899] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.469901] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.469902] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.469904] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.469914] pci 0000:00:00.0: [1002:5956] type 0 class 0x000600
[ 0.469923] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.469950] pci 0000:00:04.0: [1002:597a] type 1 class 0x000604
[ 0.469969] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.469971] pci 0000:00:04.0: PME# disabled
[ 0.469981] pci 0000:00:05.0: [1002:597b] type 1 class 0x000604
[ 0.469999] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.470001] pci 0000:00:05.0: PME# disabled
[ 0.470012] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
[ 0.470030] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.470032] pci 0000:00:07.0: PME# disabled
[ 0.470042] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
[ 0.470060] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.470062] pci 0000:00:09.0: PME# disabled
[ 0.470072] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.470090] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.470091] pci 0000:00:0a.0: PME# disabled
[ 0.470101] pci 0000:00:0b.0: [1002:5980] type 1 class 0x000604
[ 0.470120] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.470121] pci 0000:00:0b.0: PME# disabled
[ 0.470143] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.470160] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.470169] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.470177] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.470186] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.470194] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.470203] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.470221] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.470252] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.470264] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.470321] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.470333] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.470396] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.470413] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.470476] pci 0000:00:12.2: supports D1 D2
[ 0.470478] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.470481] pci 0000:00:12.2: PME# disabled
[ 0.470500] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.470512] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.470568] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.470580] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.470643] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.470660] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.470723] pci 0000:00:13.2: supports D1 D2
[ 0.470725] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.470728] pci 0000:00:13.2: PME# disabled
[ 0.470750] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.470833] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.470848] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.470856] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.470864] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.470873] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.470881] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.470925] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.470944] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.470997] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.471000] pci 0000:00:14.2: PME# disabled
[ 0.471012] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.471080] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.471116] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.471128] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.471187] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.471198] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.471207] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.471216] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.471227] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.471270] pci 0000:01:00.0: [1033:0194] type 0 class 0x000c03
[ 0.471284] pci 0000:01:00.0: reg 10: [mem 0xfddfe000-0xfddfffff 64bit]
[ 0.471334] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.471336] pci 0000:01:00.0: PME# disabled
[ 0.476016] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.476020] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.476023] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.476025] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.476059] pci 0000:02:00.0: [1b4b:91a3] type 0 class 0x000101
[ 0.476073] pci 0000:02:00.0: reg 10: [io 0xdf00-0xdf07]
[ 0.476083] pci 0000:02:00.0: reg 14: [io 0xde00-0xde03]
[ 0.476092] pci 0000:02:00.0: reg 18: [io 0xdd00-0xdd07]
[ 0.476102] pci 0000:02:00.0: reg 1c: [io 0xdc00-0xdc03]
[ 0.476111] pci 0000:02:00.0: reg 20: [io 0xdb00-0xdb0f]
[ 0.476121] pci 0000:02:00.0: reg 24: [mem 0xfdbff000-0xfdbff7ff]
[ 0.476130] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.476159] pci 0000:02:00.0: PME# supported from D3hot
[ 0.476163] pci 0000:02:00.0: PME# disabled
[ 0.484017] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.484021] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.484023] pci 0000:00:05.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.484026] pci 0000:00:05.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.484056] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.484068] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
[ 0.484087] pci 0000:03:00.0: reg 18: [mem 0xfd8ff000-0xfd8fffff 64bit pref]
[ 0.484098] pci 0000:03:00.0: reg 20: [mem 0xfd8f8000-0xfd8fbfff 64bit pref]
[ 0.484107] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.484133] pci 0000:03:00.0: supports D1 D2
[ 0.484135] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.484138] pci 0000:03:00.0: PME# disabled
[ 0.492017] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.492021] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
[ 0.492023] pci 0000:00:07.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.492026] pci 0000:00:07.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.492056] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.492068] pci 0000:04:00.0: reg 10: [io 0xbe00-0xbeff]
[ 0.492086] pci 0000:04:00.0: reg 18: [mem 0xfd6ff000-0xfd6fffff 64bit pref]
[ 0.492098] pci 0000:04:00.0: reg 20: [mem 0xfd6f8000-0xfd6fbfff 64bit pref]
[ 0.492106] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.492133] pci 0000:04:00.0: supports D1 D2
[ 0.492134] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.492137] pci 0000:04:00.0: PME# disabled
[ 0.500017] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[ 0.500020] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
[ 0.500022] pci 0000:00:09.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.500025] pci 0000:00:09.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.500056] pci 0000:05:00.0: [197b:2363] type 0 class 0x000101
[ 0.500118] pci 0000:05:00.0: reg 24: [mem 0xfd3fe000-0xfd3fffff]
[ 0.500149] pci 0000:05:00.0: PME# supported from D3hot
[ 0.500153] pci 0000:05:00.0: PME# disabled
[ 0.500174] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101
[ 0.500191] pci 0000:05:00.1: reg 10: [io 0xaf00-0xaf07]
[ 0.500201] pci 0000:05:00.1: reg 14: [io 0xae00-0xae03]
[ 0.500210] pci 0000:05:00.1: reg 18: [io 0xad00-0xad07]
[ 0.500219] pci 0000:05:00.1: reg 1c: [io 0xac00-0xac03]
[ 0.500229] pci 0000:05:00.1: reg 20: [io 0xab00-0xab0f]
[ 0.500278] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.500286] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 0.500289] pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
[ 0.500291] pci 0000:00:0a.0: bridge window [mem 0xfd300000-0xfd3fffff]
[ 0.500293] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.500318] pci 0000:06:00.0: [1002:68b8] type 0 class 0x000300
[ 0.500328] pci 0000:06:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.500336] pci 0000:06:00.0: reg 18: [mem 0xfdec0000-0xfdedffff 64bit]
[ 0.500342] pci 0000:06:00.0: reg 20: [io 0x9e00-0x9eff]
[ 0.500352] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.500366] pci 0000:06:00.0: supports D1 D2
[ 0.500381] pci 0000:06:00.1: [1002:aa58] type 0 class 0x000403
[ 0.500392] pci 0000:06:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
[ 0.500427] pci 0000:06:00.1: supports D1 D2
[ 0.508017] pci 0000:00:0b.0: PCI bridge to [bus 06-06]
[ 0.508021] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.508023] pci 0000:00:0b.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.508026] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.508062] pci 0000:07:06.0: [168c:0013] type 0 class 0x000200
[ 0.508083] pci 0000:07:06.0: reg 10: [mem 0xfd5e0000-0xfd5effff]
[ 0.508196] pci 0000:07:0e.0: [104c:8024] type 0 class 0x000c00
[ 0.508217] pci 0000:07:0e.0: reg 10: [mem 0xfd5ff000-0xfd5ff7ff]
[ 0.508229] pci 0000:07:0e.0: reg 14: [mem 0xfd5f8000-0xfd5fbfff]
[ 0.508303] pci 0000:07:0e.0: supports D1 D2
[ 0.508305] pci 0000:07:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.508309] pci 0000:07:0e.0: PME# disabled
[ 0.508340] pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.508344] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.508347] pci 0000:00:14.4: bridge window [mem 0xfd500000-0xfd5fffff]
[ 0.508351] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfd4fffff pref]
[ 0.508353] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.508354] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.508356] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.508357] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.508359] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 0.508375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.508537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.508589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.508611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.508634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.508655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.508676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.508697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT]
[ 0.520376] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.520411] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.520447] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.520480] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.520512] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.520544] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.520576] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.520608] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.520623] HEST: Table is not found!
[ 0.520667] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.520669] vgaarb: loaded
[ 0.520685] PCI: Using ACPI for IRQ routing
[ 0.520685] PCI: pci_cache_line_size set to 64 bytes
[ 0.520685] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.520685] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.520685] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
[ 0.520685] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.520685] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.522203] Switching to clocksource tsc
[ 0.522847] pnp: PnP ACPI init
[ 0.522859] ACPI: bus type pnp registered
[ 0.522937] pnp 00:00: [bus 00-ff]
[ 0.522938] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.522940] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.522941] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.522943] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.522944] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.522946] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 0.522972] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.522978] pnp 00:01: [io 0x0010-0x001f]
[ 0.522980] pnp 00:01: [io 0x0022-0x003f]
[ 0.522981] pnp 00:01: [io 0x0044-0x005f]
[ 0.522982] pnp 00:01: [io 0x0062-0x0063]
[ 0.522983] pnp 00:01: [io 0x0065-0x006f]
[ 0.522984] pnp 00:01: [io 0x0074-0x007f]
[ 0.522986] pnp 00:01: [io 0x0091-0x0093]
[ 0.522987] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.522988] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.522989] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.522990] pnp 00:01: [io 0x0220-0x0225]
[ 0.522992] pnp 00:01: [io 0x0290-0x0294]
[ 0.523032] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.601174] pnp 00:02: [io 0x0900-0x091f]
[ 0.601176] pnp 00:02: [io 0x0228-0x022f]
[ 0.601177] pnp 00:02: [io 0x040b]
[ 0.601179] pnp 00:02: [io 0x04d6]
[ 0.601180] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.601181] pnp 00:02: [io 0x0c14]
[ 0.601182] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.601183] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.601187] pnp 00:02: [io 0x0c6f]
[ 0.601188] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.601189] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.601190] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.601192] pnp 00:02: [io 0x0800-0x08fe]
[ 0.601193] pnp 00:02: [io 0x0a10-0x0a17]
[ 0.601194] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.601195] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.601196] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.601198] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.601199] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.601203] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.601229] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.601233] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.601237] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.601244] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:06:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.601269] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.601345] pnp 00:03: [dma 4]
[ 0.601347] pnp 00:03: [io 0x0000-0x000f]
[ 0.601348] pnp 00:03: [io 0x0080-0x0090]
[ 0.601349] pnp 00:03: [io 0x0094-0x009f]
[ 0.601350] pnp 00:03: [io 0x00c0-0x00df]
[ 0.601369] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.601393] pnp 00:04: [irq 0 disabled]
[ 0.601403] pnp 00:04: [irq 8]
[ 0.601404] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.601424] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.601445] pnp 00:05: [io 0x0070-0x0073]
[ 0.601464] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.601468] pnp 00:06: [io 0x0061]
[ 0.601485] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.601490] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.601496] pnp 00:07: [irq 13]
[ 0.601515] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.601764] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.601770] pnp 00:08: [irq 4]
[ 0.601806] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.601990] pnp 00:09: [io 0x0378-0x037f]
[ 0.601996] pnp 00:09: [irq 7]
[ 0.602028] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.602122] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.602156] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.602325] pnp 00:0b: [mem 0x000cf800-0x000cffff]
[ 0.602326] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
[ 0.602328] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[ 0.602329] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[ 0.602330] pnp 00:0b: [mem 0xcfee0000-0xcfeeffff]
[ 0.602332] pnp 00:0b: [mem 0xffff0000-0xffffffff]
[ 0.602333] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.602334] pnp 00:0b: [mem 0x00100000-0xcfedffff]
[ 0.602336] pnp 00:0b: [mem 0xcfef0000-0xcfefffff]
[ 0.602337] pnp 00:0b: [mem 0xcff00000-0xcfffffff]
[ 0.602338] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.602340] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.602341] pnp 00:0b: [mem 0xfff80000-0xfffeffff]
[ 0.602344] pnp 00:0b: disabling [mem 0x000cf800-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.602346] pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.602348] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.602351] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.602353] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.602355] pnp 00:0b: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.602402] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.602417] pnp: PnP ACPI: found 12 devices
[ 0.602418] ACPI: ACPI bus type pnp unregistered
[ 0.602424] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.602426] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.602427] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.602430] system 00:02: [io 0x0900-0x091f] has been reserved
[ 0.602432] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.602434] system 00:02: [io 0x040b] has been reserved
[ 0.602435] system 00:02: [io 0x04d6] has been reserved
[ 0.602437] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.602438] system 00:02: [io 0x0c14] has been reserved
[ 0.602440] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.602441] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.602443] system 00:02: [io 0x0c6f] has been reserved
[ 0.602445] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.602446] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.602448] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.602449] system 00:02: [io 0x0800-0x08fe] has been reserved
[ 0.602451] system 00:02: [io 0x0a10-0x0a17] has been reserved
[ 0.602453] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.602454] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.602456] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.602458] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.602462] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.602465] system 00:0b: [mem 0xcfee0000-0xcfeeffff] could not be reserved
[ 0.602467] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.602468] system 00:0b: [mem 0xcfef0000-0xcfefffff] has been reserved
[ 0.602470] system 00:0b: [mem 0xcff00000-0xcfffffff] could not be reserved
[ 0.602472] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.602474] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.602476] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.608072] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.608074] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.608076] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.608078] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.608083] pci 0000:02:00.0: BAR 6: assigned [mem 0xfda00000-0xfda0ffff pref]
[ 0.608084] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.608086] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.608088] pci 0000:00:05.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.608091] pci 0000:00:05.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.608094] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd800000-0xfd81ffff pref]
[ 0.608095] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.608097] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
[ 0.608099] pci 0000:00:07.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.608101] pci 0000:00:07.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.608104] pci 0000:04:00.0: BAR 6: assigned [mem 0xfd600000-0xfd61ffff pref]
[ 0.608106] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[ 0.608107] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
[ 0.608110] pci 0000:00:09.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.608112] pci 0000:00:09.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.608115] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 0.608116] pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
[ 0.608118] pci 0000:00:0a.0: bridge window [mem 0xfd300000-0xfd3fffff]
[ 0.608120] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.608124] pci 0000:06:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.608125] pci 0000:00:0b.0: PCI bridge to [bus 06-06]
[ 0.608127] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.608129] pci 0000:00:0b.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.608131] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.608134] pci 0000:00:14.4: PCI bridge to [bus 07-07]
[ 0.608137] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.608141] pci 0000:00:14.4: bridge window [mem 0xfd500000-0xfd5fffff]
[ 0.608144] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfd4fffff pref]
[ 0.608160] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.608163] pci 0000:00:04.0: setting latency timer to 64
[ 0.608171] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.608173] pci 0000:00:05.0: setting latency timer to 64
[ 0.608182] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.608184] pci 0000:00:07.0: setting latency timer to 64
[ 0.608187] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.608189] pci 0000:00:09.0: setting latency timer to 64
[ 0.608197] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.608199] pci 0000:00:0a.0: setting latency timer to 64
[ 0.608202] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.608204] pci 0000:00:0b.0: setting latency timer to 64
[ 0.608209] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.608210] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.608212] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.608213] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.608215] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.608216] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.608218] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.608219] pci_bus 0000:01: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.608221] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.608222] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.608224] pci_bus 0000:02: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.608226] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.608227] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.608228] pci_bus 0000:03: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.608230] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.608231] pci_bus 0000:04: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.608233] pci_bus 0000:04: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.608234] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.608236] pci_bus 0000:05: resource 1 [mem 0xfd300000-0xfd3fffff]
[ 0.608237] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.608239] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 0.608240] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.608242] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.608244] pci_bus 0000:07: resource 0 [io 0x8000-0x8fff]
[ 0.608245] pci_bus 0000:07: resource 1 [mem 0xfd500000-0xfd5fffff]
[ 0.608246] pci_bus 0000:07: resource 2 [mem 0xfd400000-0xfd4fffff pref]
[ 0.608248] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.608249] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.608251] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.608252] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.608254] pci_bus 0000:07: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.608275] NET: Registered protocol family 2
[ 0.608444] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.609395] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.611637] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.611941] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.611943] TCP reno registered
[ 0.611954] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.612004] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.612129] NET: Registered protocol family 1
[ 1.436061] pci 0000:00:12.1: OHCI: BIOS handoff failed (BIOS bug?) 00000184
[ 1.520128] pci 0000:06:00.0: Boot video device
[ 1.520138] PCI: CLS 64 bytes, default 64
[ 1.520174] Unpacking initramfs...
[ 1.684782] Freeing initrd memory: 10436k freed
[ 1.688116] PCI-DMA: Disabling AGP.
[ 1.688191] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.688192] PCI-DMA: using GART IOMMU.
[ 1.688195] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.691395] audit: initializing netlink socket (disabled)
[ 1.691408] type=2000 audit(1299964255.688:1): initialized
[ 1.696980] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.698061] VFS: Disk quotas dquot_6.5.2
[ 1.698096] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.698147] msgmni has been set to 11966
[ 1.698271] alg: No test for stdrng (krng)
[ 1.698329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.698332] io scheduler noop registered
[ 1.698333] io scheduler deadline registered
[ 1.698354] io scheduler cfq registered (default)
[ 1.698629] ERST: Table is not found!
[ 1.698770] Linux agpgart interface v0.103
[ 1.698800] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.719225] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.844601] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.844737] PNP: No PS/2 controller found. Probing ports directly.
[ 1.845135] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.845143] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.845218] mice: PS/2 mouse device common for all mice
[ 1.845250] rtc_cmos 00:05: RTC can wake from S4
[ 1.845296] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.845326] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.845333] cpuidle: using governor ladder
[ 1.845334] cpuidle: using governor menu
[ 1.845476] TCP cubic registered
[ 1.845547] NET: Registered protocol family 10
[ 1.845792] lo: Disabled Privacy Extensions
[ 1.845921] Mobile IPv6
[ 1.845922] NET: Registered protocol family 17
[ 1.845925] Registering the dns_resolver key type
[ 1.845991] PM: Hibernation image not present or could not be loaded.
[ 1.845997] registered taskstats version 1
[ 1.846321] rtc_cmos 00:05: setting system clock to 2011-03-12 21:10:56 UTC (1299964256)
[ 1.846337] Initalizing network drop monitor service
[ 1.846372] Freeing unused kernel memory: 608k freed
[ 1.846483] Write protecting the kernel read-only data: 6144k
[ 1.846573] Freeing unused kernel memory: 852k freed
[ 1.846764] Freeing unused kernel memory: 796k freed
[ 1.936028] udev[102]: starting version 166
[ 1.980686] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.980701] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.980738] r8169 0000:03:00.0: setting latency timer to 64
[ 1.980775] r8169 0000:03:00.0: irq 40 for MSI/MSI-X
[ 1.981093] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc90000c7e000, 00:24:1d:cd:7a:3b, XID 083000c0 IRQ 40
[ 1.984829] SCSI subsystem initialized
[ 1.991066] usbcore: registered new interface driver usbfs
[ 1.991083] usbcore: registered new interface driver hub
[ 1.991406] usbcore: registered new device driver usb
[ 1.993528] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.014951] libata version 3.00 loaded.
[ 2.030718] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.030759] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.030776] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.030796] firewire_ohci 0000:07:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.040080] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.040099] ehci_hcd 0000:00:12.2: debug port 1
[ 2.040124] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 2.040161] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.040173] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.040203] r8169 0000:04:00.0: setting latency timer to 64
[ 2.040240] r8169 0000:04:00.0: irq 41 for MSI/MSI-X
[ 2.040587] r8169 0000:04:00.0: eth1: RTL8168d/8111d at 0xffffc90000c7c000, 00:24:1d:cd:7a:39, XID 083000c0 IRQ 41
[ 2.046067] pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001)
[ 2.046070] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.046090] pata_jmicron 0000:05:00.1: setting latency timer to 64
[ 2.046334] scsi0 : pata_jmicron
[ 2.046400] scsi1 : pata_jmicron
[ 2.046431] ata1: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 19
[ 2.046433] ata2: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 19
[ 2.090227] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.090245] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.090247] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.090249] usb usb1: Product: EHCI Host Controller
[ 2.090250] usb usb1: Manufacturer: Linux 2.6.37-2-amd64 ehci_hcd
[ 2.090251] usb usb1: SerialNumber: 0000:00:12.2
[ 2.090334] hub 1-0:1.0: USB hub found
[ 2.090337] hub 1-0:1.0: 6 ports detected
[ 2.090456] firewire_ohci: Added fw-ohci device 0000:07:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 2.090478] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.090502] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.090509] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.100078] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.100096] ehci_hcd 0000:00:13.2: debug port 1
[ 2.100108] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 2.112064] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.112076] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.112078] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.112079] usb usb2: Product: EHCI Host Controller
[ 2.112081] usb usb2: Manufacturer: Linux 2.6.37-2-amd64 ehci_hcd
[ 2.112082] usb usb2: SerialNumber: 0000:00:13.2
[ 2.112149] hub 2-0:1.0: USB hub found
[ 2.112151] hub 2-0:1.0: 6 ports detected
[ 2.112238] ahci 0000:00:11.0: version 3.0
[ 2.112245] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.112328] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.112330] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.112779] scsi2 : ahci
[ 2.112828] scsi3 : ahci
[ 2.112874] scsi4 : ahci
[ 2.112919] scsi5 : ahci
[ 2.112990] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 2.112993] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 2.112996] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 2.112998] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.113043] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.113294] ahci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.113337] scsi6 : pata_atiixp
[ 2.113381] scsi7 : pata_atiixp
[ 2.113941] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.113943] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.128081] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.128084] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.128088] ahci 0000:05:00.0: setting latency timer to 64
[ 2.128342] scsi8 : ahci
[ 2.128392] scsi9 : ahci
[ 2.128425] ata9: SATA max UDMA/133 abar m8192@0xfd3fe000 port 0xfd3fe100 irq 18
[ 2.128427] ata10: SATA max UDMA/133 abar m8192@0xfd3fe000 port 0xfd3fe180 irq 18
[ 2.133217] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.133271] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.133296] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.133304] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.152088] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 2.212073] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.212075] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.212077] usb usb3: Product: OHCI Host Controller
[ 2.212078] usb usb3: Manufacturer: Linux 2.6.37-2-amd64 ohci_hcd
[ 2.212079] usb usb3: SerialNumber: 0000:00:12.0
[ 2.212152] hub 3-0:1.0: USB hub found
[ 2.212157] hub 3-0:1.0: 3 ports detected
[ 2.212237] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.212250] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.212256] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.236073] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 2.279775] ata8.00: ATAPI: PLEXTOR DVDR PX-880SA, 1.12, max UDMA/100
[ 2.292382] ata8.00: configured for UDMA/100
[ 2.296050] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.296053] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.296054] usb usb4: Product: OHCI Host Controller
[ 2.296055] usb usb4: Manufacturer: Linux 2.6.37-2-amd64 ohci_hcd
[ 2.296056] usb usb4: SerialNumber: 0000:00:12.1
[ 2.296129] hub 4-0:1.0: USB hub found
[ 2.296134] hub 4-0:1.0: 3 ports detected
[ 2.296216] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.296230] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.296236] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.296260] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 2.356040] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.356042] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.356043] usb usb5: Product: OHCI Host Controller
[ 2.356045] usb usb5: Manufacturer: Linux 2.6.37-2-amd64 ohci_hcd
[ 2.356046] usb usb5: SerialNumber: 0000:00:13.0
[ 2.356115] hub 5-0:1.0: USB hub found
[ 2.356120] hub 5-0:1.0: 3 ports detected
[ 2.356198] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.356211] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.356216] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.380072] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 2.432063] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.432111] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.436064] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.440075] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.440077] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.440078] usb usb6: Product: OHCI Host Controller
[ 2.440079] usb usb6: Manufacturer: Linux 2.6.37-2-amd64 ohci_hcd
[ 2.440081] usb usb6: SerialNumber: 0000:00:13.1
[ 2.440146] hub 6-0:1.0: USB hub found
[ 2.440151] hub 6-0:1.0: 3 ports detected
[ 2.440229] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.440243] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.440250] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.440275] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 2.456093] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.456119] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.500039] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.500041] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.500042] usb usb7: Product: OHCI Host Controller
[ 2.500044] usb usb7: Manufacturer: Linux 2.6.37-2-amd64 ohci_hcd
[ 2.500045] usb usb7: SerialNumber: 0000:00:14.5
[ 2.500110] hub 7-0:1.0: USB hub found
[ 2.500115] hub 7-0:1.0: 2 ports detected
[ 2.512059] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 2.588105] firewire_core: created device fw0: GUID 005a26f1006cf049, S400
[ 2.604061] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.604591] ata3.00: HPA detected: current 1953516911, native 1953525168
[ 2.604594] ata3.00: ATA-8: ST31000525SV, CV12, max UDMA/133
[ 2.604596] ata3.00: 1953516911 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.605295] ata3.00: configured for UDMA/133
[ 2.605408] scsi 2:0:0:0: Direct-Access ATA ST31000525SV CV12 PQ: 0 ANSI: 5
[ 2.606558] scsi 7:0:0:0: CD-ROM PLEXTOR DVDR PX-880SA 1.12 PQ: 0 ANSI: 5
[ 2.612728] sd 2:0:0:0: [sda] 1953516911 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.612753] sd 2:0:0:0: [sda] Write Protect is off
[ 2.612755] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.612765] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.620079] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.620082] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.620152] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 2.664488] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.664583] sda: p6 size 12298307 extends beyond EOD, enabling native capacity
[ 2.664609] ata3: hard resetting link
[ 2.685017] usb 1-3: New USB device found, idVendor=04f2, idProduct=a13d
[ 2.685019] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.685021] usb 1-3: Product: HP Prem AF Webcam KQ245AA
[ 2.685022] usb 1-3: Manufacturer: HP Prem AF Webcam KQ245AA
[ 2.912052] usb 2-5: new high speed USB device using ehci_hcd and address 4
[ 3.156063] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.178397] ata3.00: n_sectors mismatch 1953516911 != 1953525168
[ 3.178399] ata3.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[ 3.179097] ata3.00: configured for UDMA/133
[ 3.179100] ata3: EH complete
[ 3.179136] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.179392] sda: detected capacity change from 1000200658432 to 1000204886016
[ 3.193284] usb 2-5: New USB device found, idVendor=1307, idProduct=0330
[ 3.193286] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.193287] usb 2-5: Product: Mass Storage Device
[ 3.193289] usb 2-5: Manufacturer: Generic
[ 3.193290] usb 2-5: SerialNumber: 00000000000006
[ 3.195775] usb 2-5: selecting invalid altsetting 1
[ 3.195786] usbcore: registered new interface driver uas
[ 3.238926] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.239018] sda: p6 size 12298307 extends beyond EOD, truncated
[ 3.239240] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.243963] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.243986] sr 7:0:0:0: Attached scsi generic sg1 type 5
[ 3.244964] input: HP Prem AF Webcam KQ245AA HP Prem AF Webcam KQ245AA as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.4/input/input0
[ 3.245010] Initializing USB Mass Storage driver...
[ 3.245017] generic-usb 0003:04F2:A13D.0001: input,hidraw0: USB HID v1.11 Joystick [HP Prem AF Webcam KQ245AA HP Prem AF Webcam KQ245AA] on usb-0000:00:12.2-3/input4
[ 3.245033] usbcore: registered new interface driver usbhid
[ 3.245034] usbhid: USB HID core driver
[ 3.245116] scsi10 : usb-storage 2-5:1.0
[ 3.245317] usbcore: registered new interface driver usb-storage
[ 3.245319] USB Mass Storage support registered.
[ 3.492042] usb 3-2: new full speed USB device using ohci_hcd and address 2
[ 3.672996] usb 3-2: New USB device found, idVendor=046d, idProduct=c318
[ 3.672999] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.673000] usb 3-2: Product: Logitech Illuminated Keyboard
[ 3.673002] usb 3-2: Manufacturer: Logitech
[ 3.700096] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input1
[ 3.700131] generic-usb 0003:046D:C318.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:12.0-2/input0
[ 3.706075] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input2
[ 3.706145] generic-usb 0003:046D:C318.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:12.0-2/input1
[ 3.746076] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.972051] usb 5-2: new low speed USB device using ohci_hcd and address 2
[ 4.140998] usb 5-2: New USB device found, idVendor=056a, idProduct=0069
[ 4.141001] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.141002] usb 5-2: Product: CTF-430 V2.0-0
[ 4.141004] usb 5-2: Manufacturer: WACOM
[ 4.244728] scsi 10:0:0:0: Direct-Access Generic Compact Flash 0.00 PQ: 0 ANSI: 2
[ 4.245221] scsi 10:0:0:1: Direct-Access Generic SD/MMC 0.00 PQ: 0 ANSI: 2
[ 4.245720] scsi 10:0:0:2: Direct-Access Generic MS/MS-PRO 0.00 PQ: 0 ANSI: 2
[ 4.246220] scsi 10:0:0:3: Direct-Access Generic SM/xD-Picture 0.00 PQ: 0 ANSI: 2
[ 4.246506] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 4.246594] sd 10:0:0:1: Attached scsi generic sg3 type 0
[ 4.246674] sd 10:0:0:2: Attached scsi generic sg4 type 0
[ 4.246755] sd 10:0:0:3: Attached scsi generic sg5 type 0
[ 4.249589] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 4.250214] sd 10:0:0:1: [sdc] Attached SCSI removable disk
[ 4.250838] sd 10:0:0:2: [sdd] Attached SCSI removable disk
[ 4.251463] sd 10:0:0:3: [sde] Attached SCSI removable disk
[ 4.379981] systemd[1]: systemd 19 running in system mode. (+PAM -LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; debian)
[ 4.404058] usb 6-1: new low speed USB device using ohci_hcd and address 2
[ 4.425043] systemd[1]: Set hostname to <orchid>.
[ 4.425872] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
[ 4.573012] usb 6-1: New USB device found, idVendor=046d, idProduct=c069
[ 4.573015] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.573016] usb 6-1: Product: USB Laser Mouse
[ 4.573018] usb 6-1: Manufacturer: Logitech
[ 4.584138] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input3
[ 4.584183] generic-usb 0003:046D:C069.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:13.1-1/input0
[ 5.014743] systemd[1]: Found ordering cycle on basic.target/start
[ 5.014747] systemd[1]: Walked on cycle path to sysinit.target/start
[ 5.014750] systemd[1]: Walked on cycle path to portmap.service/start
[ 5.014753] systemd[1]: Walked on cycle path to basic.target/start
[ 5.014755] systemd[1]: Breaking ordering cycle by deleting job portmap.service/start
[ 5.014764] systemd[1]: Found
 

Thread Tools




All times are GMT. The time now is 04:27 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org