Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#617708: Acknowledgement (kernel crash during resume from hibernation on IBM TP R50p) (http://www.linux-archive.org/debian-kernel/499789-bug-617708-acknowledgement-kernel-crash-during-resume-hibernation-ibm-tp-r50p.html)

Ian Jackson 03-10-2011 07:09 PM

Bug#617708: Acknowledgement (kernel crash during resume from hibernation on IBM TP R50p)
 
Here's the dmesg I forgot to attach.

Ian.

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005ff60000 (usable)
[ 0.000000] BIOS-e820: 000000005ff60000 - 000000005ff77000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005ff77000 - 000000005ff79000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x5ff60 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 05FF80000 mask FFFF80000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 3764d000 - 37fefb49
[ 0.000000] Allocated new RAMDISK: 00100000 - 00aa2b49
[ 0.000000] Move RAMDISK from 000000003764d000 - 0000000037fefb48 to 00100000 - 00aa2b48
[ 0.000000] ACPI: RSDP 000f6d70 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 5ff6a6bd 0004C (v01 IBM TP-1R 00003210 LTP 00000000)
[ 0.000000] ACPI: FACP 5ff6a800 000F4 (v03 IBM TP-1R 00003210 IBM 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 5ff6a9e7 0C4E5 (v01 IBM TP-1R 00003210 MSFT 0100000E)
[ 0.000000] ACPI: FACS 5ff78000 00040
[ 0.000000] ACPI: SSDT 5ff6a9b4 00033 (v01 IBM TP-1R 00003210 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 5ff76ecc 00052 (v01 IBM TP-1R 00003210 IBM 00000001)
[ 0.000000] ACPI: TCPA 5ff76f1e 00032 (v01 IBM TP-1R 00003210 PTL 00000001)
[ 0.000000] ACPI: BOOT 5ff76fd8 00028 (v01 IBM TP-1R 00003210 LTP 00000001)
[ 0.000000] 651MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00014ca000 - 00014d0128] BRK ==> [00014ca000 - 00014d0128]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 0000aa2b49] NEW RAMDISK ==> [0000100000 - 0000aa2b49]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0005ff60
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005ff60
[ 0.000000] On node 0 totalpages: 392959
[ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d2000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1303 pages used for memmap
[ 0.000000] HighMem zone: 165451 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9f800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s34296 r0 d23048 u4194304
[ 0.000000] pcpu-alloc: s34296 r0 d23048 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389888
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/vg--liberator-lv--root ro acpi_sleep=s3_bios ROOTDELAY=20 no_console_suspend resume=/dev/mapper/vg--liberator-lv--swap
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0005ff60)
[ 0.000000] Memory: 1542996k/1572224k available (2501k kernel code, 28004k reserved, 1323k data, 376k init, 667016k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB)
[ 0.000000] .data : 0xc12716a1 - 0xc13bc460 (1323 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12716a1 (2501 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1594.777 MHz processor.
[ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3189.55 BogoMIPS (lpj=6379108)
[ 0.008104] Security Framework initialized
[ 0.008148] SELinux: Disabled at boot.
[ 0.008190] Mount-cache hash table entries: 512
[ 0.008405] Initializing cgroup subsys ns
[ 0.008445] Initializing cgroup subsys cpuacct
[ 0.008482] Initializing cgroup subsys devices
[ 0.008518] Initializing cgroup subsys freezer
[ 0.008554] Initializing cgroup subsys net_cls
[ 0.008623] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008681] CPU: L2 cache: 1024K
[ 0.008718] mce: CPU supports 5 MCE banks
[ 0.008773] Performance Events:
[ 0.008800] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.008866] no hardware sampling interrupt available.
[ 0.008902] p6 PMU driver.
[ 0.008939] ... version: 0
[ 0.008973] ... bit width: 32
[ 0.009008] ... generic registers: 2
[ 0.009043] ... value mask: 00000000ffffffff
[ 0.009079] ... max period: 000000007fffffff
[ 0.009115] ... fixed-purpose events: 0
[ 0.009149] ... event mask: 0000000000000003
[ 0.009190] Checking 'hlt' instruction... OK.
[ 0.024490] SMP alternatives: switching to UP code
[ 0.028771] Freeing SMP alternatives: 13k freed
[ 0.028814] ACPI: Core revision 20090903
[ 0.042441] ACPI: setting ELCR to 0200 (from 0800)
[ 0.044082] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.044120] weird, boot CPU (#0) not listed by the BIOS.
[ 0.044156] SMP motherboard not detected.
[ 0.044191] Local APIC not detected. Using dummy APIC emulation.
[ 0.044227] SMP disabled
[ 0.044482] Brought up 1 CPUs
[ 0.044517] Total of 1 processors activated (3189.55 BogoMIPS).
[ 0.045543] CPU0 attaching NULL sched-domain.
[ 0.045701] devtmpfs: initialized
[ 0.046287] regulator: core version 0.5
[ 0.046382] NET: Registered protocol family 16
[ 0.046523] ACPI: bus type pci registered
[ 0.046851] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
[ 0.046888] PCI: Using configuration type 1 for base access
[ 0.047366] bio: create slab <bio-0> at 0
[ 0.048588] ACPI: EC: EC description table is found, configuring boot EC
[ 0.060275] ACPI: Interpreter enabled
[ 0.060312] ACPI: (supports S0 S3 S4 S5)
[ 0.060456] ACPI: Using PIC for interrupt routing
[ 0.068663] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.068749] ACPI: Power Resource [PUBS] (on)
[ 0.069009] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.069071] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.069151] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.069266] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[ 0.069320] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[ 0.069374] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
[ 0.069435] pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0000000-0xc00003ff]
[ 0.069492] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.069533] pci 0000:00:1d.7: PME# disabled
[ 0.069655] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.069703] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.069763] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.069771] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.069779] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.069787] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.069795] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
[ 0.069803] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.069855] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[ 0.069899] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.069907] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.069914] pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0000c00-0xc0000dff]
[ 0.069922] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0000800-0xc00008ff]
[ 0.069951] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.069991] pci 0000:00:1f.5: PME# disabled
[ 0.072009] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.072017] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.072054] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.072093] pci 0000:00:1f.6: PME# disabled
[ 0.072163] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.072170] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.072176] pci 0000:01:00.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]
[ 0.072192] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.072212] pci 0000:01:00.0: supports D1 D2
[ 0.072251] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.072256] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
[ 0.072261] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.072297] pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff]
[ 0.072317] pci 0000:02:00.0: supports D1 D2
[ 0.072320] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.072359] pci 0000:02:00.0: PME# disabled
[ 0.072427] pci 0000:02:00.1: reg 10 32bit mmio: [0xb1000000-0xb1000fff]
[ 0.072446] pci 0000:02:00.1: supports D1 D2
[ 0.072449] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.072489] pci 0000:02:00.1: PME# disabled
[ 0.072572] pci 0000:02:01.0: reg 10 32bit mmio: [0xc0220000-0xc023ffff]
[ 0.072580] pci 0000:02:01.0: reg 14 32bit mmio: [0xc0200000-0xc020ffff]
[ 0.072588] pci 0000:02:01.0: reg 18 io port: [0x8000-0x803f]
[ 0.072608] pci 0000:02:01.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.072632] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.072671] pci 0000:02:01.0: PME# disabled
[ 0.072744] pci 0000:02:02.0: reg 10 32bit mmio: [0xc0214000-0xc0214fff]
[ 0.072828] pci 0000:00:1e.0: transparent bridge
[ 0.073577] pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
[ 0.073582] pci 0000:00:1e.0: bridge 32bit mmio: [0xc0200000-0xcfffffff]
[ 0.073588] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.073629] pci_bus 0000:00: on NUMA node 0
[ 0.073635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.073691] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.073723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.078119] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.078577] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.079032] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.079486] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.079921] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.080397] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.080885] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.081393] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.081783] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.081832] vgaarb: loaded
[ 0.081931] PCI: Using ACPI for IRQ routing
[ 0.082272] Switching to clocksource tsc
[ 0.083983] pnp: PnP ACPI init
[ 0.083983] ACPI: bus type pnp registered
[ 0.085357] pnp: PnP ACPI: found 13 devices
[ 0.085393] ACPI: ACPI bus type pnp unregistered
[ 0.085430] PnPBIOS: Disabled by ACPI PNP
[ 0.085475] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.085514] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.085554] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.085593] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 0.085632] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 0.085685] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.085725] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.085764] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.085803] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.085842] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.085881] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.085920] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.085960] system 00:00: iomem range 0x100000-0x5fffffff could not be reserved
[ 0.086007] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.086059] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.086098] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.086137] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.086175] system 00:02: ioport range 0x1600-0x162f has been reserved
[ 0.086214] system 00:02: ioport range 0x1632-0x167f has been reserved
[ 0.086253] system 00:02: ioport range 0x1630-0x1631 has been reserved
[ 0.121028] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.121067] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.121105] pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
[ 0.121144] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
[ 0.121189] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
[ 0.121227] pci 0000:02:00.0: IO window: 0x004000-0x0040ff
[ 0.121266] pci 0000:02:00.0: IO window: 0x004400-0x0044ff
[ 0.121305] pci 0000:02:00.0: PREFETCH window: 0xe8000000-0xebffffff
[ 0.121345] pci 0000:02:00.0: MEM window: 0xc4000000-0xc7ffffff
[ 0.121384] pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
[ 0.121421] pci 0000:02:00.1: IO window: 0x004800-0x0048ff
[ 0.121460] pci 0000:02:00.1: IO window: 0x004c00-0x004cff
[ 0.121499] pci 0000:02:00.1: PREFETCH window: 0xec000000-0xefffffff
[ 0.121539] pci 0000:02:00.1: MEM window: 0xc8000000-0xcbffffff
[ 0.121579] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.121617] pci 0000:00:1e.0: IO window: 0x4000-0x8fff
[ 0.121666] pci 0000:00:1e.0: MEM window: 0xc0200000-0xcfffffff
[ 0.121705] pci 0000:00:1e.0: PREFETCH window: 0xe8000000-0xefffffff
[ 0.121757] pci 0000:00:1e.0: setting latency timer to 64
[ 0.122125] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.122163] PCI: setting IRQ 11 as level-triggered
[ 0.122169] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.122564] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.122603] pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.122655] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.122659] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.122663] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.122667] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
[ 0.122671] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
[ 0.122675] pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
[ 0.122678] pci_bus 0000:02: resource 1 mem: [0xc0200000-0xcfffffff]
[ 0.122682] pci_bus 0000:02: resource 2 pref mem [0xe8000000-0xefffffff]
[ 0.122686] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.122689] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.122693] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
[ 0.122697] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
[ 0.122700] pci_bus 0000:03: resource 2 pref mem [0xe8000000-0xebffffff]
[ 0.122704] pci_bus 0000:03: resource 3 mem: [0xc4000000-0xc7ffffff]
[ 0.122708] pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
[ 0.122712] pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
[ 0.122715] pci_bus 0000:07: resource 2 pref mem [0xec000000-0xefffffff]
[ 0.122719] pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff]
[ 0.122762] NET: Registered protocol family 2
[ 0.122913] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.123390] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.124872] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.125924] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.125967] TCP reno registered
[ 0.126157] NET: Registered protocol family 1
[ 0.126304] pci 0000:01:00.0: Boot video device
[ 0.126391] Unpacking initramfs...
[ 0.507688] Freeing initrd memory: 9866k freed
[ 0.521762] Simple Boot Flag at 0x35 set to 0x1
[ 0.522112] audit: initializing netlink socket (disabled)
[ 0.522171] type=2000 audit(1299786173.521:1): initialized
[ 0.527621] highmem bounce pool size: 64 pages
[ 0.527663] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.529794] VFS: Disk quotas dquot_6.5.2
[ 0.529908] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.530045] msgmni has been set to 1731
[ 0.530328] alg: No test for stdrng (krng)
[ 0.530433] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.530480] io scheduler noop registered
[ 0.530515] io scheduler anticipatory registered
[ 0.530551] io scheduler deadline registered
[ 0.530638] io scheduler cfq registered (default)
[ 0.530893] isapnp: Scanning for PnP cards...
[ 0.883813] isapnp: No Plug & Play device found
[ 0.885561] Linux agpgart interface v0.103
[ 0.885684] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[ 0.899105] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.899234] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.900229] serial 00:0a: activated
[ 0.900376] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 0.900515] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.900566] serial 0000:00:1f.6: PCI INT B disabled
[ 0.900705] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.906693] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.906737] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.906883] mice: PS/2 mouse device common for all mice
[ 0.906973] rtc_cmos 00:06: RTC can wake from S4
[ 0.907053] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.907105] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.907154] cpuidle: using governor ladder
[ 0.907189] cpuidle: using governor menu
[ 0.907226] No iBFT detected.
[ 0.907773] TCP cubic registered
[ 0.908016] NET: Registered protocol family 10
[ 0.908712] lo: Disabled Privacy Extensions
[ 0.909179] Mobile IPv6
[ 0.909213] NET: Registered protocol family 17
[ 0.909274] Using IPI No-Shortcut mode
[ 0.909385] PM: Checking image partition /dev/mapper/vg--liberator-lv--swap
[ 0.911092] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.916477] PM: Resume from disk failed.
[ 0.916495] registered taskstats version 1
[ 0.916804] rtc_cmos 00:06: setting system clock to 2011-03-10 19:42:54 UTC (1299786174)
[ 0.916881] Initalizing network drop monitor service
[ 0.916941] Freeing unused kernel memory: 376k freed
[ 0.917209] Write protecting the kernel text: 2504k
[ 0.917269] Write protecting the kernel read-only data: 920k
[ 0.941891] udev[49]: starting version 164
[ 1.174917] SCSI subsystem initialized
[ 1.185638] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 1.185682] Copyright (c) 1999-2006 Intel Corporation.
[ 1.185764] e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.209596] Floppy drive(s): fd0 is 1.44M
[ 1.210156] usbcore: registered new interface driver usbfs
[ 1.210357] usbcore: registered new interface driver hub
[ 1.212104] usbcore: registered new device driver usb
[ 1.443144] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:89:eb:c2
[ 1.447710] FDC 0 is a National Semiconductor PC87306
[ 1.447766] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.448201] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.489145] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.489568] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 1.489609] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 1.489676] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.489681] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.489749] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.489828] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.493751] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.496790] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
[ 1.500953] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.500997] ACPI: Thermal Zone [THM0] (53 C)
[ 1.504206] libata version 3.00 loaded.
[ 1.512031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.512120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.512159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.512205] usb usb1: Product: EHCI Host Controller
[ 1.512241] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.512278] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.512424] usb usb1: configuration #1 chosen from 1 choice
[ 1.512500] hub 1-0:1.0: USB hub found
[ 1.512543] hub 1-0:1.0: 6 ports detected
[ 1.512884] ata_piix 0000:00:1f.1: version 2.13
[ 1.512898] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.513357] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.513398] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.513491] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.514024] scsi0 : ata_piix
[ 1.515556] scsi1 : ata_piix
[ 1.516594] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 1.516635] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 1.529766] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 1.606372] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.606690] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.606869] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.606915] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.607681] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.607686] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.607736] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.607808] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 1.607899] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.607938] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.607984] usb usb2: Product: UHCI Host Controller
[ 1.608039] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.608076] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.608272] usb usb2: configuration #1 chosen from 1 choice
[ 1.608386] hub 2-0:1.0: USB hub found
[ 1.608429] hub 2-0:1.0: 2 ports detected
[ 1.608711] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.608889] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.609289] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.609328] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.609379] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.609384] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.609428] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.609494] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 1.609572] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.609610] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.609656] usb usb3: Product: UHCI Host Controller
[ 1.609692] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.609729] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.609886] usb usb3: configuration #1 chosen from 1 choice
[ 1.609995] hub 3-0:1.0: USB hub found
[ 1.610037] hub 3-0:1.0: 2 ports detected
[ 1.610124] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.610175] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.610179] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.610221] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.610286] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 1.610364] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.610402] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.610448] usb usb4: Product: UHCI Host Controller
[ 1.610484] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.610521] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.610676] usb usb4: configuration #1 chosen from 1 choice
[ 1.610784] hub 4-0:1.0: USB hub found
[ 1.610825] hub 4-0:1.0: 2 ports detected
[ 1.733387] ata1.00: ATA-8: WDC WD3200BEVE-00A0HT0, 11.01A11, max UDMA/100
[ 1.733431] ata1.00: 625142448 sectors, multi 16: LBA48
[ 1.741339] ata1.00: configured for UDMA/100
[ 1.741517] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVE-0 11.0 PQ: 0 ANSI: 5
[ 1.762068] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.762184] sd 0:0:0:0: [sda] Write Protect is off
[ 1.762222] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.762250] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.762461] sda: sda1 sda2 sda3 sda4
[ 1.774334] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.824030] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 2.176966] device-mapper: uevent: version 1.0.3
[ 2.177609] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.457905] usb 1-4: New USB device found, idVendor=090c, idProduct=1000
[ 2.457947] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.457986] usb 1-4: Product: USB Flash Disk
[ 2.458022] usb 1-4: Manufacturer: General
[ 2.458057] usb 1-4: SerialNumber: 5810030000052793
[ 2.458226] usb 1-4: configuration #1 chosen from 1 choice
[ 2.472629] Initializing USB Mass Storage driver...
[ 2.472774] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2.472959] usbcore: registered new interface driver usb-storage
[ 2.472998] USB Mass Storage support registered.
[ 2.473584] usb-storage: device found at 2
[ 2.473587] usb-storage: waiting for device to settle before scanning
[ 7.472618] usb-storage: device scan complete
[ 7.502628] scsi 2:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
[ 7.505473] sd 2:0:0:0: [sdb] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 7.507223] sd 2:0:0:0: [sdb] Write Protect is off
[ 7.507264] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 7.507267] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.513333] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.513375] sdb: sdb4
[ 7.519108] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.519153] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 10.748420] PM: Starting manual resume from disk
[ 10.748469] PM: Resume from partition 254:4
[ 10.748472] PM: Checking hibernation image.
[ 10.748807] PM: Error -22 checking image file
[ 10.748810] PM: Resume from disk failed.
[ 10.795466] kjournald starting. Commit interval 5 seconds
[ 10.795513] EXT3-fs: dm-1: orphan cleanup on readonly fs
[ 10.806284] ext3_orphan_cleanup: deleting unreferenced inode 1885771
[ 10.816949] EXT3-fs: dm-1: 1 orphan inode deleted
[ 10.816985] EXT3-fs: recovery complete.
[ 10.824114] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.195864] udev[488]: starting version 164
[ 13.510278] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 13.522279] ACPI: Lid Switch [LID]
[ 13.522443] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 13.522497] ACPI: Sleep Button [SLPB]
[ 13.522624] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 13.522672] ACPI: Power Button [PWRF]
[ 13.584898] ACPI: AC Adapter [AC] (on-line)
[ 13.602003] Marking TSC unstable due to TSC halts in idle
[ 13.603481] processor LNXCPU:00: registered as cooling_device0
[ 13.604533] Switching to clocksource acpi_pm
[ 13.606974] ACPI: Battery Slot [BAT0] (battery present)
[ 13.661049] Non-volatile memory driver v1.3
[ 13.662598] parport_pc 00:0b: reported by Plug and Play ACPI
[ 13.662677] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 13.667831] intel_rng: FWH not detected
[ 13.684174] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.695736] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 13.697944] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input4
[ 13.698097] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 13.702319] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.730400] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.948773] NET: Registered protocol family 23
[ 14.055561] [drm] Initialized drm 1.1.0 20060810
[ 14.056130] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0552]
[ 14.056184] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
[ 14.056232] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
[ 14.056385] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21b22, devctl 0x64
[ 14.169636] thinkpad_acpi: ThinkPad ACPI Extras v0.23
[ 14.169678] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 14.169714] thinkpad_acpi: ThinkPad BIOS 1RETDPWW (3.21 ), EC 1RHT71WW-3.04
[ 14.169752] thinkpad_acpi: IBM ThinkPad R50p, model 18322AG
[ 14.169789] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[ 14.169827] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[ 14.178337] nsc-ircc 00:0c: activated
[ 14.178546] nsc-ircc, chip->init
[ 14.178587] nsc-ircc, Found chip at base=0x02e
[ 14.178645] nsc-ircc, driver loaded (Dag Brattli)
[ 14.191861] IrDA: Registered device irda0
[ 14.191903] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 14.200004] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 14.200737] Registered led device: tpacpi::thinklight
[ 14.201019] Registered led device: tpacpi::power
[ 14.201653] Registered led device: tpacpi::standby
[ 14.239790] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 14.292754] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0430, PCI irq 11
[ 14.292798] yenta_cardbus 0000:02:00.0: Socket status: 30000086
[ 14.292841] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 14.292889] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
[ 14.294706] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 14.294754] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 14.295140] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0552]
[ 14.295191] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
[ 14.295237] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
[ 14.295277] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21b22, devctl 0x64
[ 14.482609] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0
[ 14.482663] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 14.520712] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 14.525026] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
[ 14.525069] yenta_cardbus 0000:02:00.1: Socket status: 30000086
[ 14.525110] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 14.525158] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
[ 14.526716] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 14.526764] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 14.772569] pci 0000:01:00.0: power state changed by ACPI to D0
[ 14.772649] pci 0000:01:00.0: power state changed by ACPI to D0
[ 14.772694] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 14.773444] [drm] Initialized radeon 1.32.0 20080528 for 0000:01:00.0 on minor 0
[ 14.779356] Error: Driver 'pcspkr' is already registered, aborting...
[ 15.040705] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 15.040777] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 15.072202] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 15.072341] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 15.114214] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
[ 15.115823] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: clean.
[ 15.116515] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean.
[ 15.119410] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 15.130246] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
[ 15.133178] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x800-0x8ff: clean.
[ 15.133839] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: clean.
[ 15.134627] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 16.000032] intel8x0_measure_ac97_clock: measured 55381 usecs (2668 samples)
[ 16.000076] intel8x0: clocking to 48000
[ 16.795041] Adding 5242872k swap on /dev/mapper/vg--liberator-lv--swap. Priority:-1 extents:1 across:5242872k
[ 16.806133] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 16.806626] EXT3 FS on dm-1, internal journal
[ 18.709162] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 18.778047] kjournald starting. Commit interval 5 seconds
[ 18.778094] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 18.780303] EXT3 FS on dm-3, internal journal
[ 18.780362] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.848798] kjournald starting. Commit interval 5 seconds
[ 18.849182] EXT3 FS on dm-2, internal journal
[ 18.849239] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.773718] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 19.970680] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8

Holger Levsen 03-11-2011 08:55 AM

Bug#617708: Acknowledgement (kernel crash during resume from hibernation on IBM TP R50p)
 
Hi Ian,

from your dmesg output I cannot see if you have exactly the same radeon as my
R51 has (ATI Radeon RV250), but take a look at #595124 and see if the
workaround (disabling agpmode) also works for you.

Also, did you report 617709 in error? It looks like a clone of 617708.


cheers,
Holger

Ian Jackson 03-11-2011 10:20 AM

Bug#617708: Acknowledgement (kernel crash during resume from hibernation on IBM TP R50p)
 
Holger Levsen writes ("Re: Bug#617708: Acknowledgement (kernel crash during resume from hibernation on IBM TP R50p)"):
> from your dmesg output I cannot see if you have exactly the same
> radeon as my R51 has (ATI Radeon RV250), but take a look at #595124
> and see if the workaround (disabling agpmode) also works for you.

I'll try that and report back. #595124 is about suspend-to-ram,
though.

> Also, did you report 617709 in error? It looks like a clone of 617708.

No. There are two bugs: with KMS enabled, the machine always locks up
with a blank screen when asked to hibernate. With KMS disabled, it
sometimes locks up on resume. I don't think these are likely to have
the same cause.

Ian.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 19834.1412.272450.483472@chiark.greenend.org.uk">h ttp://lists.debian.org/19834.1412.272450.483472@chiark.greenend.org.uk


All times are GMT. The time now is 04:14 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.