FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 02-15-2011, 01:17 PM
"Fernando C. Estrada"
 
Default Bug#613536: firmware-realtek: Please include the binary firmware for Realtek RTL8188CE

Package: firmware-realtek
Version: 0.28
Severity: wishlist

*** Please type your report below this line ***

Hi,

Please include the binary firmware for Realtek RTL8188CE [1] in the
package "firmware-realtek". This hardware is included in the netbook
Dell Inspiron Mini 10 (1018).

Currently if you try to download the binary firmware for RTL8188CE, you
get it for RTL8192CE but the readme file says: "This driver supports
RealTek rtl8192CE/8188CE PCI Wireless LAN NIC", and RTL8192CE was in
upstream since 3 months ago [2].

Currently I have it working with the instructions from the readme file
after the installation of "build-essential", and "linux-headers-`uname
-r`":

1. Change to Super User
su -
2. Compile driver from the source code
make
3. Install the driver to the kernel
make install
reboot
4. Uninstall driver (not tested yet xD)
make uninstall

Here's the relevant information from lspci:

07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE
802.11b/g/n WiFi Adapter (rev 01)
Subsystem: Dell Device 8198
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at f0100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8192CE

In the attached files you'll find the output from "lspci -vv" and
"dmesg" commands. Any other required information please don't hesitate
to ask.

Thanks for your patience until now ;-)

-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

firmware-realtek depends on no packages.

firmware-realtek recommends no packages.

Versions of packages firmware-realtek suggests:
ii initramfs-tools 0.98.8 tools for generating an
initramfs
ii linux-image-2.6.32-5-amd64 [l 2.6.32-30 Linux 2.6.32 for 64-bit PCs

-- no debconf information

Best Regards,

P.S. Currently the wireless connection is lost aproximately every 5
minutes and reconnected automatically using wicd, but I don't know how
to report this, so any help will be very appreciated.

[1]
http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=48&PFid=48&Level= 5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true #RTL8188CE
[2]
http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git;a=commit;h=8f919160792e4702c6b7a67a24 3cea4f757407e4
--
Fernando C. Estrada
e0000000 - efffffff
[ 0.175928] PCI: Using configuration type 1 for base access
[ 0.176657] bio: create slab <bio-0> at 0
[ 0.177099] ACPI: EC: Look up EC in DSDT
[ 0.186055] ACPI: Interpreter enabled
[ 0.186055] ACPI: (supports S0 S3 S4 S5)
[ 0.186055] ACPI: Using IOAPIC for interrupt routing
[ 0.233142] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.233627] ACPI: No dock devices found.
[ 0.235741] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.235755] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f1a86c0), AE_ALREADY_EXISTS
[ 0.235770] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.235821] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.235966] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0200000-0xf027ffff]
[ 0.235975] pci 0000:00:02.0: reg 14 io port: [0x18d0-0x18d7]
[ 0.235983] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.235991] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0000000-0xf00fffff]
[ 0.236047] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0280000-0xf02fffff]
[ 0.236174] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0300000-0xf0303fff]
[ 0.236243] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.236251] pci 0000:00:1b.0: PME# disabled
[ 0.236358] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.236366] pci 0000:00:1c.0: PME# disabled
[ 0.236483] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.236491] pci 0000:00:1c.1: PME# disabled
[ 0.236571] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.236647] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.236722] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.236796] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.236877] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0504000-0xf05043ff]
[ 0.236946] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.236954] pci 0000:00:1d.7: PME# disabled
[ 0.237126] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.237213] pci 0000:00:1f.2: reg 10 io port: [0x18e8-0x18ef]
[ 0.237224] pci 0000:00:1f.2: reg 14 io port: [0x18dc-0x18df]
[ 0.237236] pci 0000:00:1f.2: reg 18 io port: [0x18e0-0x18e7]
[ 0.237248] pci 0000:00:1f.2: reg 1c io port: [0x18d8-0x18db]
[ 0.237259] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18cf]
[ 0.237271] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0504400-0xf05047ff]
[ 0.237315] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.237322] pci 0000:00:1f.2: PME# disabled
[ 0.237386] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
[ 0.237493] pci 0000:05:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.237524] pci 0000:05:00.0: reg 18 64bit mmio pref: [0xf0f2c000-0xf0f2cfff]
[ 0.237547] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xf0f18000-0xf0f1bfff]
[ 0.237617] pci 0000:05:00.0: supports D1 D2
[ 0.237622] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.237632] pci 0000:05:00.0: PME# disabled
[ 0.244136] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.244152] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0f00000-0xf0ffffff]
[ 0.244260] pci 0000:07:00.0: reg 10 io port: [0x3000-0x30ff]
[ 0.244301] pci 0000:07:00.0: reg 18 64bit mmio: [0xf0100000-0xf0103fff]
[ 0.244412] pci 0000:07:00.0: supports D1 D2
[ 0.244417] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.244429] pci 0000:07:00.0: PME# disabled
[ 0.252162] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.252171] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[ 0.252244] pci 0000:00:1e.0: transparent bridge
[ 0.252290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.252499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.252626] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.252764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.253111] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.253124] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f1a86c0), AE_ALREADY_EXISTS
[ 0.265001] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.265199] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.265393] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.265587] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.265804] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.266012] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.266217] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.266421] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.266650] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.266670] vgaarb: loaded
[ 0.266714] PCI: Using ACPI for IRQ routing
[ 0.266714] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.266714] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.272030] Switching to clocksource tsc
[ 0.274333] pnp: PnP ACPI init
[ 0.274368] ACPI: bus type pnp registered
[ 0.296684] pnp: PnP ACPI: found 8 devices
[ 0.296689] ACPI: ACPI bus type pnp unregistered
[ 0.296717] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.296724] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.296731] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.296738] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.296746] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.296753] system 00:01: ioport range 0x164e-0x174c has been reserved
[ 0.296761] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.296769] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.296777] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.296784] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[ 0.301836] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.301844] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.301854] pci 0000:00:1c.0: MEM window: 0x40000000-0x403fffff
[ 0.301863] pci 0000:00:1c.0: PREFETCH window: 0x000000f0f00000-0x000000f0ffffff
[ 0.301875] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:07
[ 0.301881] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.301891] pci 0000:00:1c.1: MEM window: 0xf0100000-0xf01fffff
[ 0.301900] pci 0000:00:1c.1: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.301911] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:11
[ 0.301916] pci 0000:00:1e.0: IO window: disabled
[ 0.301924] pci 0000:00:1e.0: MEM window: disabled
[ 0.301931] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.301958] alloc irq_desc for 16 on node -1
[ 0.301963] alloc kstat_irqs on node -1
[ 0.301982] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.301992] pci 0000:00:1c.0: setting latency timer to 64
[ 0.302008] alloc irq_desc for 17 on node -1
[ 0.302012] alloc kstat_irqs on node -1
[ 0.302021] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.302029] pci 0000:00:1c.1: setting latency timer to 64
[ 0.302042] pci 0000:00:1e.0: setting latency timer to 64
[ 0.302051] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.302057] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.302064] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff]
[ 0.302070] pci_bus 0000:05: resource 1 mem: [0x40000000-0x403fffff]
[ 0.302076] pci_bus 0000:05: resource 2 pref mem [0xf0f00000-0xf0ffffff]
[ 0.302082] pci_bus 0000:07: resource 0 io: [0x3000-0x3fff]
[ 0.302087] pci_bus 0000:07: resource 1 mem: [0xf0100000-0xf01fffff]
[ 0.302093] pci_bus 0000:07: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.302100] pci_bus 0000:11: resource 3 io: [0x00-0xffff]
[ 0.302106] pci_bus 0000:11: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.302177] NET: Registered protocol family 2
[ 0.302407] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.303368] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.305098] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305833] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.305840] TCP reno registered
[ 0.306054] NET: Registered protocol family 1
[ 0.306116] pci 0000:00:02.0: Boot video device
[ 0.306357] Unpacking initramfs...
[ 0.749760] Freeing initrd memory: 8954k freed
[ 0.756919] Simple Boot Flag at 0x35 set to 0x1
[ 0.757594] audit: initializing netlink socket (disabled)
[ 0.757620] type=2000 audit(1297778017.755:1): initialized
[ 0.763524] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.766712] VFS: Disk quotas dquot_6.5.2
[ 0.766846] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.767014] msgmni has been set to 1984
[ 0.767474] alg: No test for stdrng (krng)
[ 0.767610] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.767617] io scheduler noop registered
[ 0.767621] io scheduler anticipatory registered
[ 0.767625] io scheduler deadline registered
[ 0.767705] io scheduler cfq registered (default)
[ 0.768375] alloc irq_desc for 24 on node -1
[ 0.768382] alloc kstat_irqs on node -1
[ 0.768404] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.768420] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.768653] alloc irq_desc for 25 on node -1
[ 0.768658] alloc kstat_irqs on node -1
[ 0.768673] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.768687] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.772155] Linux agpgart interface v0.103
[ 0.772188] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 0.772424] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 0.785339] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.785430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.786085] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.786201] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.800204] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.800223] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.800429] mice: PS/2 mouse device common for all mice
[ 0.800502] rtc_cmos 00:04: RTC can wake from S4
[ 0.800607] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.800654] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.800682] cpuidle: using governor ladder
[ 0.800688] cpuidle: using governor menu
[ 0.800700] No iBFT detected.
[ 0.801353] TCP cubic registered
[ 0.801614] NET: Registered protocol family 10
[ 0.802558] lo: Disabled Privacy Extensions
[ 0.803158] Mobile IPv6
[ 0.803166] NET: Registered protocol family 17
[ 0.803384] PM: Resume from disk failed.
[ 0.803416] registered taskstats version 1
[ 0.804016] rtc_cmos 00:04: setting system clock to 2011-02-15 13:53:38 UTC (1297778018)
[ 0.804109] Initalizing network drop monitor service
[ 0.804170] Freeing unused kernel memory: 592k freed
[ 0.804456] Write protecting the kernel read-only data: 4236k
[ 0.813087] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.840874] udev[56]: starting version 166
[ 1.145632] usbcore: registered new interface driver usbfs
[ 1.145704] usbcore: registered new interface driver hub
[ 1.145829] usbcore: registered new device driver usb
[ 1.153133] SCSI subsystem initialized
[ 1.154858] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.154933] alloc irq_desc for 23 on node -1
[ 1.154940] alloc kstat_irqs on node -1
[ 1.154960] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.155001] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.155011] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.155070] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.155132] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.155153] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.159063] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.159623] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504000
[ 1.166825] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.166870] r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.166942] r8169 0000:05:00.0: setting latency timer to 64
[ 1.166955] r8169 0000:05:00.0: unknown MAC, using family default
[ 1.167020] alloc irq_desc for 26 on node -1
[ 1.167027] alloc kstat_irqs on node -1
[ 1.167057] r8169 0000:05:00.0: irq 26 for MSI/MSI-X
[ 1.168802] eth0: RTL8101e at 0xffffc900001fe000, 5c:26:0a:07:cc:cf, XID 00900000 IRQ 26
[ 1.172066] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.172136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.172145] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.172154] usb usb1: Product: EHCI Host Controller
[ 1.172160] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.172167] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.172408] usb usb1: configuration #1 chosen from 1 choice
[ 1.172512] hub 1-0:1.0: USB hub found
[ 1.172535] hub 1-0:1.0: 8 ports detected
[ 1.224130] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.224237] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.224257] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.224266] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.224303] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.224366] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.224473] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.224482] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.224490] usb usb2: Product: UHCI Host Controller
[ 1.224497] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.224504] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.224736] usb usb2: configuration #1 chosen from 1 choice
[ 1.224858] hub 2-0:1.0: USB hub found
[ 1.224884] hub 2-0:1.0: 2 ports detected
[ 1.225047] alloc irq_desc for 19 on node -1
[ 1.225055] alloc kstat_irqs on node -1
[ 1.225074] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.225092] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.225101] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.225137] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.225210] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.225317] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.225326] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.225334] usb usb3: Product: UHCI Host Controller
[ 1.225340] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.225346] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.225579] usb usb3: configuration #1 chosen from 1 choice
[ 1.225690] hub 3-0:1.0: USB hub found
[ 1.225715] hub 3-0:1.0: 2 ports detected
[ 1.225903] alloc irq_desc for 18 on node -1
[ 1.225911] alloc kstat_irqs on node -1
[ 1.225931] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.225950] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.225960] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.225999] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.226082] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.226191] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.226200] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.226208] usb usb4: Product: UHCI Host Controller
[ 1.226214] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.226220] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.226473] usb usb4: configuration #1 chosen from 1 choice
[ 1.226577] hub 4-0:1.0: USB hub found
[ 1.226603] hub 4-0:1.0: 2 ports detected
[ 1.226777] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.228178] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.228190] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.228238] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.228318] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.228429] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.228438] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.228446] usb usb5: Product: UHCI Host Controller
[ 1.228453] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.228459] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.228716] usb usb5: configuration #1 chosen from 1 choice
[ 1.228815] hub 5-0:1.0: USB hub found
[ 1.228840] hub 5-0:1.0: 2 ports detected
[ 1.230010] libata version 3.00 loaded.
[ 1.243115] ahci 0000:00:1f.2: version 3.0
[ 1.243152] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.243242] alloc irq_desc for 27 on node -1
[ 1.243249] alloc kstat_irqs on node -1
[ 1.243276] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.243408] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.243421] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.243433] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.244094] scsi0 : ahci
[ 1.244657] scsi1 : ahci
[ 1.245045] scsi2 : ahci
[ 1.249213] scsi3 : ahci
[ 1.249687] ata1: SATA max UDMA/133 abar m1024@0xf0504400 port 0xf0504500 irq 27
[ 1.249699] ata2: SATA max UDMA/133 abar m1024@0xf0504400 port 0xf0504580 irq 27
[ 1.249709] ata3: SATA max UDMA/133 abar m1024@0xf0504400 port 0xf0504600 irq 27
[ 1.249719] ata4: SATA max UDMA/133 abar m1024@0xf0504400 port 0xf0504680 irq 27
[ 1.484031] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 1.568035] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.568069] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.572034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.572068] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.573038] ata1.00: ATA-8: Hitachi HTS545016B9A300, PBBOC60S, max UDMA/133
[ 1.573046] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.574269] ata1.00: configured for UDMA/133
[ 1.589226] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54501 PBBO PQ: 0 ANSI: 5
[ 1.603961] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.604197] sd 0:0:0:0: [sda] Write Protect is off
[ 1.604208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.604304] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.604884] sda: sda1 sda2 sda3 sda4
[ 1.654258] usb 1-4: New USB device found, idVendor=04f2, idProduct=b201
[ 1.654266] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.654272] usb 1-4: Product: Laptop_Integrated_Webcam_0.3M
[ 1.654277] usb 1-4: Manufacturer: CNFA025G185010000SQ0
[ 1.654458] usb 1-4: configuration #1 chosen from 1 choice
[ 1.662347] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.768036] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 1.910925] usb 1-8: New USB device found, idVendor=0bda, idProduct=0158
[ 1.910933] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.910939] usb 1-8: Product: USB2.0-CRW
[ 1.910944] usb 1-8: Manufacturer: Generic
[ 1.910948] usb 1-8: SerialNumber: 20071114173400000
[ 1.911133] usb 1-8: configuration #1 chosen from 1 choice
[ 1.930572] Initializing USB Mass Storage driver...
[ 1.930883] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.931144] usbcore: registered new interface driver usb-storage
[ 1.931155] USB Mass Storage support registered.
[ 1.931499] usb-storage: device found at 3
[ 1.931506] usb-storage: waiting for device to settle before scanning
[ 2.240009] PM: Starting manual resume from disk
[ 2.240020] PM: Resume from partition 8:4
[ 2.240024] PM: Checking hibernation image.
[ 2.240210] PM: Error -22 checking image file
[ 2.240214] PM: Resume from disk failed.
[ 2.323793] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 3.632810] udev[321]: starting version 166
[ 4.118959] ACPI: SSDT 000000003f5d8fea 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 4.120327] ACPI: SSDT 000000003f5d8852 00609 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 4.183796] Monitor-Mwait will be used to enter C-1 state
[ 4.184991] Monitor-Mwait will be used to enter C-2 state
[ 4.185107] Monitor-Mwait will be used to enter C-3 state
[ 4.185131] Marking TSC unstable due to TSC halts in idle
[ 4.185399] processor LNXCPU:00: registered as cooling_device0
[ 4.186776] ACPI: SSDT 000000003f5d91ed 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 4.187773] ACPI: SSDT 000000003f5d8e5b 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 4.189714] Switching to clocksource hpet
[ 4.198784] processor LNXCPU:01: registered as cooling_device1
[ 4.214239] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input2
[ 4.214390] ACPI: Lid Switch [LID0]
[ 4.215395] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input3
[ 4.215415] ACPI: Power Button [PWRB]
[ 4.215641] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.215656] ACPI: Power Button [PWRF]
[ 4.236237] ACPI: AC Adapter [ACAD] (off-line)
[ 4.248910] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.260480] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.538632] ACPI: Battery Slot [BAT1] (battery present)
[ 4.930121] rtllib_crypt: registered algorithm 'NULL'
[ 4.930131] rtllib_crypt: registered algorithm 'TKIP'
[ 4.930137] rtllib_crypt: registered algorithm 'CCMP'
[ 4.930142] rtllib_crypt: registered algorithm 'WEP'
[ 4.930147]
[ 4.930149] Linux kernel driver for RTL8192 based WLAN cards
[ 4.930155] Copyright (c) 2007-2008, Realsil Wlan Driver
[ 4.930258] rtl8192CE 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.930275] rtl8192CE 0000:07:00.0: setting latency timer to 64
[ 4.930580] Memory mapped space start: 0xf0100000
[ 4.933362] GetPciBusInfo(): Find Device(10EC:8176) bus=7 dev=0, func=0
[ 4.934429] GetPciBridegInfo : Find Device(8086:27D2) bus=0 dev=28, func=1
[ 4.934437] Pci Bridge Vendor is found index: 0
[ 4.934443] Pci Bridge Vendor is 8086
[ 4.945041] =========>rtl8192ce_ReadBluetoothCoexistInfoFromHW PG(): EEPROMBluetoothCoexist:0, EEPROMBluetoothType:3
[ 4.945052] SWAS: bHwAntDiv = 1
[ 4.983012] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0xa0400
[ 5.038841] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.078553] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 5.196782] [drm] Initialized drm 1.1.0 20060810
[ 5.244929] Linux video capture interface: v2.00
[ 5.310930] Error: Driver 'pcspkr' is already registered, aborting...
[ 6.157058] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.157071] i915 0000:00:02.0: setting latency timer to 64
[ 6.185479] alloc irq_desc for 28 on node -1
[ 6.185489] alloc kstat_irqs on node -1
[ 6.185511] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 6.185526] [drm] set up 7M of stolen space
[ 6.205886] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (04f2:b201)
[ 6.216225] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
[ 6.216367] usbcore: registered new interface driver uvcvideo
[ 6.216375] USB Video Class driver (v0.1.0)
[ 6.290374] [drm] initialized overlay support
[ 6.760075] [drm] Big FIFO is enabled
[ 6.760099] [drm] Big FIFO is enabled
[ 6.928342] usb-storage: device scan complete
[ 6.930576] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.946187] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 6.964225] Console: switching to colour frame buffer device 128x37
[ 6.971461] fb0: inteldrmfb frame buffer device
[ 6.971468] registered panic notifier
[ 6.978985] acpi device:00: registered as cooling_device2
[ 6.981781] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.987882] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 6.988801] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.988901] alloc irq_desc for 22 on node -1
[ 6.988909] alloc kstat_irqs on node -1
[ 6.988930] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.989116] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.126489] hda_codec: ALC272: BIOS auto-probing.
[ 7.127768] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 7.912360] Adding 1992696k swap on /dev/sda4. Priority:-1 extents:1 across:1992696k
[ 8.593563] loop: module loaded
[ 9.419957] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 9.513230] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 10.534754] fuse init (API version 7.13)
[ 11.134478] r8169: eth0: link down
[ 11.134879] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.595465] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 14.805683] lp: driver loaded but no devices found
[ 14.887791] ppdev: user-space parallel port driver
[ 16.463141] Bluetooth: Core ver 2.15
[ 16.463286] NET: Registered protocol family 31
[ 16.463292] Bluetooth: HCI device and connection manager initialized
[ 16.463299] Bluetooth: HCI socket layer initialized
[ 16.483988] Bluetooth: L2CAP ver 2.14
[ 16.483995] Bluetooth: L2CAP socket layer initialized
[ 16.498831] Bluetooth: RFCOMM TTY layer initialized
[ 16.498844] Bluetooth: RFCOMM socket layer initialized
[ 16.498850] Bluetooth: RFCOMM ver 1.11
[ 16.530849] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.530858] Bluetooth: BNEP filters: protocol multicast
[ 16.602535] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.602542] Bluetooth: SCO socket layer initialized
[ 20.245358] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:1
[ 20.245423] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:0
[ 20.246705] gen_RefreshLedState first init
[ 20.459580] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 20.459677] InitializeAdapter8190(): ????
[ 20.572622] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.593976] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:11
[ 20.594043] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:10
[ 20.595307] gen_RefreshLedState first init
[ 20.808296] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 20.808411] InitializeAdapter8190(): ????
[ 26.103962] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:11
[ 26.104055] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:10
[ 26.105339] gen_RefreshLedState first init
[ 26.317660] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 26.317759] InitializeAdapter8190(): ????
[ 28.465329] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:11
[ 28.465394] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:10
[ 28.466653] gen_RefreshLedState first init
[ 28.679423] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 28.679523] InitializeAdapter8190(): ????
[ 28.780373] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.975425] r8169: eth0: link down
[ 28.976111] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.050731] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:11
[ 29.050796] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:10
[ 29.052068] gen_RefreshLedState first init
[ 29.264909] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 29.265046] InitializeAdapter8190(): ????
[ 29.458195] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:11
[ 29.458256] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:10
[ 29.459509] gen_RefreshLedState first init
[ 29.672352] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 29.672446] InitializeAdapter8190(): ????
[ 29.773226] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.848864] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:11
[ 31.848927] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:10
[ 31.850188] gen_RefreshLedState first init
[ 32.062891] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 32.062993] InitializeAdapter8190(): ????
[ 32.163462] Linking with Me caga la vecina gritaperros,channel:4, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406
[ 32.163595] rtllib_associate_procedure_wq(), chan:4
[ 32.163608] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 32.173766] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 32.175301] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 32.177184] Associated successfully
[ 32.177191] normal associate
[ 32.177209] Using G rates:108
[ 32.177213] Successfully associated, ht not enabled(0, 0)
[ 32.177713] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 32.180620] notify_wx_assoc_event(): Tell user space disconnected
[ 32.180663] Linking with Me caga la vecina gritaperros,channel:4, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[ 32.180772] rtllib_associate_procedure_wq(), chan:4
[ 32.180777] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 32.191012] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 32.192823] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 32.196509] Associated successfully
[ 32.196519] normal associate
[ 32.196548] Using G rates:108
[ 32.196554] Successfully associated, ht not enabled(0, 0)
[ 35.307528] DHCP pkt src port:68, dest port:67!!
[ 36.931576] DHCP pkt src port:68, dest port:67!!
[ 37.774868] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 42.733029] wlan0: no IPv6 routers present
[ 67.871172] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 67.871196] notify_wx_assoc_event(): Tell user space disconnected
[ 67.871214] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 67.889123] rtllib_associate_procedure_wq(), chan:4
[ 67.889134] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 67.899278] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 67.900603] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 67.902504] Associated successfully
[ 67.902511] normal associate
[ 67.902539] Using G rates:108
[ 67.902546] Successfully associated, ht not enabled(0, 0)
[ 67.973126] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 67.973147] notify_wx_assoc_event(): Tell user space disconnected
[ 67.973170] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 67.992142] rtllib_associate_procedure_wq(), chan:4
[ 67.992152] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 68.002285] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 68.004047] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 68.006348] Associated successfully
[ 68.006355] normal associate
[ 68.006385] Using G rates:108
[ 68.006389] Successfully associated, ht not enabled(0, 0)
[ 68.075459] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 68.075476] notify_wx_assoc_event(): Tell user space disconnected
[ 68.075496] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 68.092132] rtllib_associate_procedure_wq(), chan:4
[ 68.092142] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 68.102281] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 68.103688] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 68.105551] Associated successfully
[ 68.105558] normal associate
[ 68.105583] Using G rates:108
[ 68.105587] Successfully associated, ht not enabled(0, 0)
[ 68.177818] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 68.177835] notify_wx_assoc_event(): Tell user space disconnected
[ 68.177855] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 68.196147] rtllib_associate_procedure_wq(), chan:4
[ 68.196157] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 68.206291] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 68.207624] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 68.209614] Associated successfully
[ 68.209622] normal associate
[ 68.209650] Using G rates:108
[ 68.209654] Successfully associated, ht not enabled(0, 0)
[ 68.280274] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 68.280291] notify_wx_assoc_event(): Tell user space disconnected
[ 68.280310] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 68.300143] rtllib_associate_procedure_wq(), chan:4
[ 68.300153] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 68.310286] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 68.311654] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 68.313655] Associated successfully
[ 68.313662] normal associate
[ 68.313687] Using G rates:108
[ 68.313693] Successfully associated, ht not enabled(0, 0)
[ 68.382628] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 68.382648] notify_wx_assoc_event(): Tell user space disconnected
[ 68.382668] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 68.400143] rtllib_associate_procedure_wq(), chan:4
[ 68.400153] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 68.410296] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 68.411966] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 68.414205] Associated successfully
[ 68.414212] normal associate
[ 68.414237] Using G rates:108
[ 68.414247] Successfully associated, ht not enabled(0, 0)
[ 68.485015] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 68.485032] notify_wx_assoc_event(): Tell user space disconnected
[ 68.485051] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 68.504140] rtllib_associate_procedure_wq(), chan:4
[ 68.504149] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 68.514283] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 68.515707] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 68.517638] Associated successfully
[ 68.517646] normal associate
[ 68.517671] Using G rates:108
[ 68.517678] Successfully associated, ht not enabled(0, 0)
[ 68.587501] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 68.587518] notify_wx_assoc_event(): Tell user space disconnected
[ 68.587537] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 68.604127] rtllib_associate_procedure_wq(), chan:4
[ 68.604136] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 68.614270] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 68.615616] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 68.617567] Associated successfully
[ 68.617575] normal associate
[ 68.617603] Using G rates:108
[ 68.617607] Successfully associated, ht not enabled(0, 0)
[ 68.689933] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 68.689950] notify_wx_assoc_event(): Tell user space disconnected
[ 68.689970] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 68.708141] rtllib_associate_procedure_wq(), chan:4
[ 68.708151] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 68.718282] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 68.719717] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 68.721691] Associated successfully
[ 68.721699] normal associate
[ 68.721721] Using G rates:108
[ 68.721728] Successfully associated, ht not enabled(0, 0)
[ 68.792218] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 68.792235] notify_wx_assoc_event(): Tell user space disconnected
[ 68.792256] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 68.812146] rtllib_associate_procedure_wq(), chan:4
[ 68.812156] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 68.822285] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 68.823881] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 68.826069] Associated successfully
[ 68.826076] normal associate
[ 68.826101] Using G rates:108
[ 68.826105] Successfully associated, ht not enabled(0, 0)
[ 68.894738] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 68.894760] notify_wx_assoc_event(): Tell user space disconnected
[ 68.894781] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 68.912142] rtllib_associate_procedure_wq(), chan:4
[ 68.912152] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 68.922292] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 68.923687] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 68.925575] Associated successfully
[ 68.925582] normal associate
[ 68.925606] Using G rates:108
[ 68.925613] Successfully associated, ht not enabled(0, 0)
[ 68.997223] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 68.997240] notify_wx_assoc_event(): Tell user space disconnected
[ 68.997261] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 69.016145] rtllib_associate_procedure_wq(), chan:4
[ 69.016155] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 69.026286] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 69.027701] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 69.029574] Associated successfully
[ 69.029582] normal associate
[ 69.029604] Using G rates:108
[ 69.029614] Successfully associated, ht not enabled(0, 0)
[ 69.099783] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 69.099799] notify_wx_assoc_event(): Tell user space disconnected
[ 69.099820] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 69.116133] rtllib_associate_procedure_wq(), chan:4
[ 69.116142] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 69.126273] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 69.127646] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 69.129706] Associated successfully
[ 69.129713] normal associate
[ 69.129738] Using G rates:108
[ 69.129745] Successfully associated, ht not enabled(0, 0)
[ 69.202227] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 69.202245] notify_wx_assoc_event(): Tell user space disconnected
[ 69.202266] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 69.220141] rtllib_associate_procedure_wq(), chan:4
[ 69.220150] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 69.230285] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 69.231919] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 69.234031] Associated successfully
[ 69.234038] normal associate
[ 69.234062] Using G rates:108
[ 69.234073] Successfully associated, ht not enabled(0, 0)
[ 69.304631] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 69.304648] notify_wx_assoc_event(): Tell user space disconnected
[ 69.304667] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 69.324129] rtllib_associate_procedure_wq(), chan:4
[ 69.324138] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 69.334272] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 69.335692] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 69.337651] Associated successfully
[ 69.337658] normal associate
[ 69.337687] Using G rates:108
[ 69.337691] Successfully associated, ht not enabled(0, 0)
[ 69.407129] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 69.407148] notify_wx_assoc_event(): Tell user space disconnected
[ 69.407171] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 69.424142] rtllib_associate_procedure_wq(), chan:4
[ 69.424153] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 69.434292] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 69.435699] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 69.437635] Associated successfully
[ 69.437642] normal associate
[ 69.437671] Using G rates:108
[ 69.437675] Successfully associated, ht not enabled(0, 0)
[ 69.509071] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 69.509090] notify_wx_assoc_event(): Tell user space disconnected
[ 69.509110] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 69.528141] rtllib_associate_procedure_wq(), chan:4
[ 69.528150] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 69.538284] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 69.539618] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 69.541539] Associated successfully
[ 69.541546] normal associate
[ 69.541570] Using G rates:108
[ 69.541581] Successfully associated, ht not enabled(0, 0)
[ 69.611440] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 69.611457] notify_wx_assoc_event(): Tell user space disconnected
[ 69.611476] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 69.628141] rtllib_associate_procedure_wq(), chan:4
[ 69.628150] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 69.638286] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 69.639915] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 69.642075] Associated successfully
[ 69.642082] normal associate
[ 69.642107] Using G rates:108
[ 69.642117] Successfully associated, ht not enabled(0, 0)
[ 69.713811] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 69.713828] notify_wx_assoc_event(): Tell user space disconnected
[ 69.713848] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 69.732143] rtllib_associate_procedure_wq(), chan:4
[ 69.732153] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 69.742292] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 69.743615] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 69.745577] Associated successfully
[ 69.745585] normal associate
[ 69.745609] Using G rates:108
[ 69.745613] Successfully associated, ht not enabled(0, 0)
[ 69.816345] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 69.816364] notify_wx_assoc_event(): Tell user space disconnected
[ 69.816386] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 69.836145] rtllib_associate_procedure_wq(), chan:4
[ 69.836155] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 69.846289] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 69.847734] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 69.849631] Associated successfully
[ 69.849639] normal associate
[ 69.849663] Using G rates:108
[ 69.849669] Successfully associated, ht not enabled(0, 0)
[ 69.918838] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 69.918862] notify_wx_assoc_event(): Tell user space disconnected
[ 69.918884] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 69.936144] rtllib_associate_procedure_wq(), chan:4
[ 69.936154] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 69.946286] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 69.947654] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 69.949560] Associated successfully
[ 69.949567] normal associate
[ 69.949596] Using G rates:108
[ 69.949600] Successfully associated, ht not enabled(0, 0)
[ 70.021133] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 70.021151] notify_wx_assoc_event(): Tell user space disconnected
[ 70.021171] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 70.040140] rtllib_associate_procedure_wq(), chan:4
[ 70.040149] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 70.050289] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 70.051803] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 70.054091] Associated successfully
[ 70.054099] normal associate
[ 70.054123] Using G rates:108
[ 70.054130] Successfully associated, ht not enabled(0, 0)
[ 70.123539] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 70.123556] notify_wx_assoc_event(): Tell user space disconnected
[ 70.123578] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 70.140130] rtllib_associate_procedure_wq(), chan:4
[ 70.140140] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 70.150271] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 70.151580] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 70.153521] Associated successfully
[ 70.153528] normal associate
[ 70.153556] Using G rates:108
[ 70.153560] Successfully associated, ht not enabled(0, 0)
[ 70.225914] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 70.225932] notify_wx_assoc_event(): Tell user space disconnected
[ 70.225954] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 70.244139] rtllib_associate_procedure_wq(), chan:4
[ 70.244148] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 70.254292] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 70.255666] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 70.257517] Associated successfully
[ 70.257524] normal associate
[ 70.257549] Using G rates:108
[ 70.257556] Successfully associated, ht not enabled(0, 0)
[ 70.328244] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 70.328261] notify_wx_assoc_event(): Tell user space disconnected
[ 70.328280] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 70.348140] rtllib_associate_procedure_wq(), chan:4
[ 70.348150] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 70.358288] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 70.359640] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 70.361620] Associated successfully
[ 70.361628] normal associate
[ 70.361652] Using G rates:108
[ 70.361656] Successfully associated, ht not enabled(0, 0)
[ 70.430741] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 70.430759] notify_wx_assoc_event(): Tell user space disconnected
[ 70.430778] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 70.448102] rtllib_associate_procedure_wq(), chan:4
[ 70.448114] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 70.458251] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 70.459873] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 70.461977] Associated successfully
[ 70.461985] normal associate
[ 70.462012] Using G rates:108
[ 70.462019] Successfully associated, ht not enabled(0, 0)
[ 70.533104] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 70.533121] notify_wx_assoc_event(): Tell user space disconnected
[ 70.533142] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 70.552133] rtllib_associate_procedure_wq(), chan:4
[ 70.552143] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 70.562285] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 70.563674] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 70.565631] Associated successfully
[ 70.565638] normal associate
[ 70.565668] Using G rates:108
[ 70.565672] Successfully associated, ht not enabled(0, 0)
[ 70.635499] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 70.635516] notify_wx_assoc_event(): Tell user space disconnected
[ 70.635535] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 70.652137] rtllib_associate_procedure_wq(), chan:4
[ 70.652146] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 70.662278] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 70.663602] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 70.665561] Associated successfully
[ 70.665569] normal associate
[ 70.665594] Using G rates:108
[ 70.665601] Successfully associated, ht not enabled(0, 0)
[ 70.737925] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 70.737943] notify_wx_assoc_event(): Tell user space disconnected
[ 70.737963] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 70.756140] rtllib_associate_procedure_wq(), chan:4
[ 70.756150] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 70.766288] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 70.767630] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 70.769573] Associated successfully
[ 70.769581] normal associate
[ 70.769606] Using G rates:108
[ 70.769610] Successfully associated, ht not enabled(0, 0)
[ 70.840571] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 70.840590] notify_wx_assoc_event(): Tell user space disconnected
[ 70.840610] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 70.860135] rtllib_associate_procedure_wq(), chan:4
[ 70.860150] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 70.870304] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 70.871787] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 70.874044] Associated successfully
[ 70.874052] normal associate
[ 70.874077] Using G rates:108
[ 70.874084] Successfully associated, ht not enabled(0, 0)
[ 70.942856] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 70.942877] notify_wx_assoc_event(): Tell user space disconnected
[ 70.942896] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 70.961120] rtllib_associate_procedure_wq(), chan:4
[ 70.961131] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 70.971265] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 70.972670] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 70.974645] Associated successfully
[ 70.974652] normal associate
[ 70.974679] Using G rates:108
[ 70.974685] Successfully associated, ht not enabled(0, 0)
[ 71.045154] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 71.045171] notify_wx_assoc_event(): Tell user space disconnected
[ 71.045190] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 71.064141] rtllib_associate_procedure_wq(), chan:4
[ 71.064151] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 71.074284] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 71.075643] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 71.077550] Associated successfully
[ 71.077557] normal associate
[ 71.077582] Using G rates:108
[ 71.077594] Successfully associated, ht not enabled(0, 0)
[ 71.147579] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 71.147595] notify_wx_assoc_event(): Tell user space disconnected
[ 71.147615] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 71.165120] rtllib_associate_procedure_wq(), chan:4
[ 71.165129] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 71.175269] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 71.176686] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 71.178655] Associated successfully
[ 71.178662] normal associate
[ 71.178686] Using G rates:108
[ 71.178692] Successfully associated, ht not enabled(0, 0)
[ 71.250153] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 71.250172] notify_wx_assoc_event(): Tell user space disconnected
[ 71.250193] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 71.268142] rtllib_associate_procedure_wq(), chan:4
[ 71.268152] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 71.278288] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 71.279832] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 71.282092] Associated successfully
[ 71.282099] normal associate
[ 71.282123] Using G rates:108
[ 71.282134] Successfully associated, ht not enabled(0, 0)
[ 71.352838] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 71.352858] notify_wx_assoc_event(): Tell user space disconnected
[ 71.352882] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 71.372102] rtllib_associate_procedure_wq(), chan:4
[ 71.372113] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 71.382259] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 71.383679] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 71.385661] Associated successfully
[ 71.385668] normal associate
[ 71.385695] Using G rates:108
[ 71.385702] Successfully associated, ht not enabled(0, 0)
[ 71.455261] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 71.455280] notify_wx_assoc_event(): Tell user space disconnected
[ 71.455301] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 71.472143] rtllib_associate_procedure_wq(), chan:4
[ 71.472153] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 71.482293] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 71.483653] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 71.485591] Associated successfully
[ 71.485598] normal associate
[ 71.485628] Using G rates:108
[ 71.485632] Successfully associated, ht not enabled(0, 0)
[ 71.557645] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 71.557662] notify_wx_assoc_event(): Tell user space disconnected
[ 71.557683] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 71.576139] rtllib_associate_procedure_wq(), chan:4
[ 71.576149] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 71.586291] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 71.587721] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 71.589695] Associated successfully
[ 71.589703] normal associate
[ 71.589727] Using G rates:108
[ 71.589734] Successfully associated, ht not enabled(0, 0)
[ 71.659551] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 71.659568] notify_wx_assoc_event(): Tell user space disconnected
[ 71.659590] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 71.676146] rtllib_associate_procedure_wq(), chan:4
[ 71.676156] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 71.686290] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 71.687724] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 71.690091] Associated successfully
[ 71.690098] normal associate
[ 71.690124] Using G rates:108
[ 71.690134] Successfully associated, ht not enabled(0, 0)
[ 71.761881] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 71.761898] notify_wx_assoc_event(): Tell user space disconnected
[ 71.761919] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 71.781734] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:11
[ 71.781798] ################>rtl8192ce_InitMAC()Reg0xEC:98053f 15:10
[ 71.783056] gen_RefreshLedState first init
[ 71.995839] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 71.995940] InitializeAdapter8190(): ????
[ 72.096263] rtllib_associate_procedure_wq(), chan:4
[ 72.096274] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 72.106408] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 72.107895] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 72.109861] Associated successfully
[ 72.109868] normal associate
[ 72.109894] Using G rates:108
[ 72.109900] Successfully associated, ht not enabled(0, 0)
[ 83.775314] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 98.635971] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 98.635997] notify_wx_assoc_event(): Tell user space disconnected
[ 98.636015] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 98.656079] rtllib_associate_procedure_wq(), chan:4
[ 98.656088] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 98.666230] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 98.667581] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 98.669725] Associated successfully
[ 98.669731] normal associate
[ 98.669750] Using G rates:108
[ 98.669754] Successfully associated, ht not enabled(0, 0)
[ 98.737944] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 98.737970] notify_wx_assoc_event(): Tell user space disconnected
[ 98.737988] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 98.757053] rtllib_associate_procedure_wq(), chan:4
[ 98.757060] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 98.767192] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 98.768546] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 98.770444] Associated successfully
[ 98.770452] normal associate
[ 98.770479] Using G rates:108
[ 98.770486] Successfully associated, ht not enabled(0, 0)
[ 98.840231] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 98.840246] notify_wx_assoc_event(): Tell user space disconnected
[ 98.840264] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 98.860057] rtllib_associate_procedure_wq(), chan:4
[ 98.860064] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 98.870194] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 98.871570] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 98.873518] Associated successfully
[ 98.873526] normal associate
[ 98.873549] Using G rates:108
[ 98.873554] Successfully associated, ht not enabled(0, 0)
[ 98.942797] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 98.942817] notify_wx_assoc_event(): Tell user space disconnected
[ 98.942832] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 98.961050] rtllib_associate_procedure_wq(), chan:4
[ 98.961057] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 98.971189] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 98.972907] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 98.975251] Associated successfully
[ 98.975259] normal associate
[ 98.975282] Using G rates:108
[ 98.975289] Successfully associated, ht not enabled(0, 0)
[ 99.045132] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 99.045150] notify_wx_assoc_event(): Tell user space disconnected
[ 99.045171] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 99.065081] rtllib_associate_procedure_wq(), chan:4
[ 99.065090] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 99.075232] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 99.076575] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 99.078453] Associated successfully
[ 99.078461] normal associate
[ 99.078487] Using G rates:108
[ 99.078493] Successfully associated, ht not enabled(0, 0)
[ 99.147625] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 99.147645] notify_wx_assoc_event(): Tell user space disconnected
[ 99.147666] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 99.164144] rtllib_associate_procedure_wq(), chan:4
[ 99.164154] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 99.174294] ==============>rtllib_associate_procedure_wq():iee e->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 99.175913] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 99.178329] Associated successfully
[ 99.178336] normal associate
[ 99.178362] Using G rates:108
[ 99.178369] Successfully associated, ht not enabled(0, 0)
[ 99.249964] ==========>received disassoc/deauth(c0) frame, reason code:7
[ 99.249981] notify_wx_assoc_event(): Tell user space disconnected
[ 99.250003] ===========>RemovePeerTS,00:22:a4:5c:28:59
[ 99.268138] rtllib_associate_procedure_wq(), chan:4
[ 99.268147] HTSetConnectBwMode()HTInfo->bCurBW40MHz:0
[ 99.278278] ==============>rtllib_associate_procedure_wq():iee e->current_network.qo
 

Thread Tools




All times are GMT. The time now is 06:22 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org