FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 02-13-2011, 07:43 PM
Johann Glaser
 
Default Bug#613275: linux-image-2.6.37-trunk-amd64: em28xx/ir_core crashes on USB disconnect

Package: linux-2.6
Version: 2.6.37-1~experimental.1
Severity: normal
Tags: upstream

Using the USB Hauppauge WinTV-HVR 900 (version B2C0) TV card mostly works ok.
But when the device is disconnected from the USB-bus it reproducably triggers a
kernel oops.

The error happens at
[35045.833703] BUG: unable to handle kernel NULL pointer dereference at
0000000000000298
[35045.833711] IP: [<ffffffffa01f30b8>] ir_close+0x10/0x22 [ir_core]

See the attached log file for the full trace.



-- Package-specific info:
** Version:
Linux version 2.6.37-trunk-amd64 (Debian 2.6.37-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 SMP Thu Jan 6 14:13:28 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.37-trunk-amd64 root=/dev/mapper/vg0-debroot ro quiet

** Tainted: P (1)
* Proprietary module has been loaded.

** Kernel log:
[ 35.624845] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 35.660672] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 35.688549] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 35.691686] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 35.725774] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[ 36.545346] fuse init (API version 7.15)
[ 36.935013] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 36.990707] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 36.991981] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.025886] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6
[ 38.449099] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 38.449103] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 38.449858] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 41.973676] Bluetooth: Core ver 2.15
[ 41.973684] NET: Registered protocol family 31
[ 41.973685] Bluetooth: HCI device and connection manager initialized
[ 41.973686] Bluetooth: HCI socket layer initialized
[ 42.065014] Bluetooth: L2CAP ver 2.15
[ 42.065016] Bluetooth: L2CAP socket layer initialized
[ 42.067921] Bluetooth: RFCOMM TTY layer initialized
[ 42.067924] Bluetooth: RFCOMM socket layer initialized
[ 42.067925] Bluetooth: RFCOMM ver 1.11
[ 42.119809] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 42.119811] Bluetooth: BNEP filters: protocol multicast
[ 42.139828] input: G15 Extra Keys as /devices/virtual/input/input7
[ 42.426163] Bluetooth: SCO (Voice Link) ver 0.6
[ 42.426165] Bluetooth: SCO socket layer initialized
[ 42.939086] lp: driver loaded but no devices found
[ 43.057980] ppdev: user-space parallel port driver
[ 44.075141] pcieport 0000:00:03.0: AER: Corrected error received: id=0018
[ 44.075146] pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=0018(Transmitter ID)
[ 44.075148] pcieport 0000:00:03.0: device [8086:d138] error status/mask=00001000/00002000
[ 44.075150] pcieport 0000:00:03.0: [12] Replay Timer Timeout
[ 49.250076] eth0: no IPv6 routers present
[ 49.805106] usb 2-1.8: new high speed USB device using ehci_hcd and address 6
[ 49.917385] usb 2-1.8: New USB device found, idVendor=0c0b, idProduct=b159
[ 49.917390] usb 2-1.8: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 49.917395] usb 2-1.8: Product: DataStation maxi m.u
[ 49.917398] usb 2-1.8: Manufacturer: Trekstor
[ 49.917401] usb 2-1.8: SerialNumber: 00011405
[ 49.919380] usb 2-1.8: selecting invalid altsetting 1
[ 49.919747] scsi6 : usb-storage 2-1.8:1.0
[ 52.085688] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0
[ 52.146899] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 52.148292] EXT4-fs (dm-6): re-mounted. Opts: commit=0
[ 52.150047] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[ 52.151796] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[ 52.330603] EXT4-fs (dm-5): re-mounted. Opts: commit=0
[ 53.154151] CE: hpet4 increased min_delta_ns to 7500 nsec
[ 53.154162] CE: hpet4 increased min_delta_ns to 11250 nsec
[ 53.523674] EXT4-fs (dm-7): re-mounted. Opts: commit=0
[ 54.762923] CE: hpet2 increased min_delta_ns to 7500 nsec
[ 54.762935] CE: hpet2 increased min_delta_ns to 11250 nsec
[ 55.042553] CE: hpet increased min_delta_ns to 20113 nsec
[ 71.916775] usb 2-1.8: reset high speed USB device using ehci_hcd and address 6
[ 72.702908] CE: hpet5 increased min_delta_ns to 7500 nsec
[ 72.702919] CE: hpet5 increased min_delta_ns to 11250 nsec
[ 92.866607] usb 2-1.8: reset high speed USB device using ehci_hcd and address 6
[ 113.816645] usb 2-1.8: reset high speed USB device using ehci_hcd and address 6
[ 114.939390] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 121.956035] CE: hpet6 increased min_delta_ns to 7500 nsec
[ 121.956047] CE: hpet6 increased min_delta_ns to 11250 nsec
[ 134.766515] usb 2-1.8: reset high speed USB device using ehci_hcd and address 6
[ 196.649620] usb 2-1.8: USB disconnect, address 6
[ 199.400834] usb 2-1.8: new high speed USB device using ehci_hcd and address 7
[ 199.513135] usb 2-1.8: New USB device found, idVendor=0c0b, idProduct=b159
[ 199.513141] usb 2-1.8: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 199.513145] usb 2-1.8: Product: DataStation maxi m.u
[ 199.513149] usb 2-1.8: Manufacturer: Trekstor
[ 199.513152] usb 2-1.8: SerialNumber: 00011405
[ 199.515145] usb 2-1.8: selecting invalid altsetting 1
[ 199.515253] scsi7 : usb-storage 2-1.8:1.0
[ 221.632174] usb 2-1.8: reset high speed USB device using ehci_hcd and address 7
[ 242.582221] usb 2-1.8: reset high speed USB device using ehci_hcd and address 7
[ 263.599995] usb 2-1.8: reset high speed USB device using ehci_hcd and address 7
[ 284.545864] usb 2-1.8: reset high speed USB device using ehci_hcd and address 7
[ 296.553365] usb 2-1.8: USB disconnect, address 7
[ 468.963605] usb 2-1.8: new high speed USB device using ehci_hcd and address 8
[ 469.075919] usb 2-1.8: New USB device found, idVendor=0c0b, idProduct=b159
[ 469.075925] usb 2-1.8: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 469.075929] usb 2-1.8: Product: DataStation maxi m.u
[ 469.075933] usb 2-1.8: Manufacturer: Trekstor
[ 469.075936] usb 2-1.8: SerialNumber: 00011405
[ 469.077646] usb 2-1.8: selecting invalid altsetting 1
[ 469.077770] scsi8 : usb-storage 2-1.8:1.0
[ 470.097286] scsi 8:0:0:0: Direct-Access SAMSUNG HD501LJ PQ: 0 ANSI: 2
[ 470.098442] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 470.099171] sd 8:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 470.101783] sd 8:0:0:0: [sdf] Write Protect is off
[ 470.101791] sd 8:0:0:0: [sdf] Mode Sense: 38 00 00 00
[ 470.101796] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 470.105147] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 470.116319] sdf: sdf1
[ 470.119736] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 470.119740] sd 8:0:0:0: [sdf] Attached SCSI disk
[ 470.895270] REISERFS (device sdf1): found reiserfs format "3.6" with standard journal
[ 470.895286] REISERFS (device sdf1): using ordered data mode
[ 470.904866] REISERFS (device sdf1): journal params: device sdf1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 470.905266] REISERFS (device sdf1): checking transaction log (sdf1)
[ 470.958954] REISERFS (device sdf1): Using r5 hash to sort names

** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corp.
bios_version: WBIBX10J.86A.0122.2009.0802.2219
board_vendor: Intel Corporation
board_name: DP55WB
board_version: AAE64798-204

** Loaded modules:
Module Size Used by
reiserfs 194515 1
parport_pc 18869 0
ppdev 5139 0
lp 7966 0
parport 25742 3 parport_pc,ppdev,lp
sco 7563 2
bnep 9960 2
rfcomm 28534 0
l2cap 30438 6 bnep,rfcomm
bluetooth 44517 6 sco,bnep,rfcomm,l2cap
rfkill 13886 3 bluetooth
fuse 54779 1
acpi_cpufreq 5351 0
mperf 1259 1 acpi_cpufreq
adt7475 16382 0
hwmon_vid 1820 1 adt7475
loop 13835 0
firewire_sbp2 11535 0
snd_usb_audio 75158 1
snd_pcm 61869 1 snd_usb_audio
snd_page_alloc 6321 1 snd_pcm
snd_hwdep 5484 1 snd_usb_audio
snd_usbmidi_lib 15618 1 snd_usb_audio
snd_seq_midi 4486 0
snd_seq_midi_event 4786 1 snd_seq_midi
snd_rawmidi 15945 2 snd_usbmidi_lib,snd_seq_midi
snd_seq 42518 2 snd_seq_midi,snd_seq_midi_event
snd_timer 16304 2 snd_pcm,snd_seq
snd_seq_device 4531 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 47164 10 snd_usb_audio,snd_pcm,snd_hwdep,snd_usbmidi_lib,sn d_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 4614 1 snd
nvidia 10019555 38
tpm_tis 7141 0
tpm 9907 1 tpm_tis
uinput 6942 2
evdev 8115 14
tpm_bios 4709 1 tpm
processor 25140 9 acpi_cpufreq
button 4722 0
pcspkr 1739 0
thermal_sys 11764 1 processor
i2c_i801 7318 0
i2c_core 16458 3 adt7475,nvidia,i2c_i801
ext4 279593 7
mbcache 5104 1 ext4
jbd2 57995 1 ext4
crc16 1327 2 l2cap,ext4
dm_mod 56131 22
usb_storage 39639 1
uas 6917 0
sg 19095 0
sr_mod 12759 0
sd_mod 28370 6
cdrom 29865 1 sr_mod
crc_t10dif 1300 1 sd_mod
usbhid 30874 0
hid 65142 1 usbhid
ata_generic 3151 0
ata_piix 20999 4
firewire_ohci 22186 0
e1000e 117358 0
libata 143334 2 ata_generic,ata_piix
scsi_mod 154687 7 firewire_sbp2,usb_storage,uas,sg,sr_mod,sd_mod,lib ata
firewire_core 42353 2 firewire_sbp2,firewire_ohci
ehci_hcd 31486 0
usbcore 118919 8 snd_usb_audio,snd_usbmidi_lib,usb_storage,uas,usbh id,ehci_hcd
crc_itu_t 1331 1 firewire_core
nls_base 6369 1 usbcore

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e2000000-e30fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000e1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:19.0 Ethernet controller [0200]: Intel Corporation 82578DC Gigabit Network Connection [8086:10f0] (rev 05)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at e3200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e3224000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 2020 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e3225400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
Subsystem: Intel Corporation Device [8086:0034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e3220000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e3300000-e34fffff
Prefetchable memory behind bridge: 00000000e3500000-00000000e36fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: e3700000-e38fffff
Prefetchable memory behind bridge: 00000000e3900000-00000000e3afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.6 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 [8086:3b4e] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: e3b00000-e3cfffff
Prefetchable memory behind bridge: 00000000e3d00000-00000000e3efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e3225000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: e3100000-e31fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b02] (rev 05)
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b20] (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 2098 [size=8]
Region 1: I/O ports at 20ac [size=4]
Region 2: I/O ports at 2090 [size=8]
Region 3: I/O ports at 20a8 [size=4]
Region 4: I/O ports at 2070 [size=16]
Region 5: I/O ports at 2060 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e3225800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2000 [size=32]
Kernel driver in use: i801_smbus

00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller [8086:3b26] (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 2088 [size=8]
Region 1: I/O ports at 20a4 [size=4]
Region 2: I/O ports at 2080 [size=8]
Region 3: I/O ports at 20a0 [size=4]
Region 4: I/O ports at 2050 [size=16]
Region 5: I/O ports at 2040 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

01:00.0 VGA compatible controller [0300]: nVidia Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Device [1acc:27d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
[virtual] Expansion ROM at e3080000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia

01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio Controller [10de:0be3] (rev a1)
Subsystem: Device [1acc:27d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>

05:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e3104000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e3100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 046d:0a07 Logitech, Inc.
Bus 001 Device 004: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 002 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 002 Device 004: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 008: ID 0c0b:b159 Dura Micro, Inc. (Acomdata)


-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.37-trunk-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_AT.utf8, LC_CTYPE=de_AT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.37-trunk-amd64 depends on:
ii debconf [debconf 1.5.38 Debian configuration management sy
ii initramfs-tools 0.98.8 tools for generating an initramfs
ii linux-base 2.6.37-1~experimental.1 Linux image base package
ii module-init-tool 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.37-trunk-amd64 recommends:
ii firmware-linux-f 2.6.37-1~experimental.1 Binary firmware for various driver

Versions of packages linux-image-2.6.37-trunk-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.37 <none> (no description available)

Versions of packages linux-image-2.6.37-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.37-trunk-amd64/prerm/removing-running-kernel-2.6.37-trunk-amd64: true
linux-image-2.6.37-trunk-amd64/postinst/missing-firmware-2.6.37-trunk-amd64:
linux-image-2.6.37-trunk-amd64/postinst/depmod-error-initrd-2.6.37-trunk-amd64: false
linux-image-2.6.37-trunk-amd64/postinst/ignoring-do-bootloader-2.6.37-trunk-amd64:
 

Thread Tools




All times are GMT. The time now is 09:47 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org