Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#611493: Test with /boot on a standard partition (http://www.linux-archive.org/debian-kernel/484827-bug-611493-test-boot-standard-partition.html)

Pascal BERNARD 02-03-2011 07:37 PM

Bug#611493: Test with /boot on a standard partition
 
I updated grub after copying boot under a standard partition. I still
have the same problem.

At the initrd prompt, I can see that the only LVM partitions not mapped
under /dev/mapper are those belonging to the same physical volume as the
partition mounted on /. The others are there, and pvdisplay and
lvdisplay are reporting normally.

The attached file shows the result of dmesg, followed by the result of
mount and the /dev/mapper list.

Hope this will help.

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/lainie-sqroot ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ff90000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ff90000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ff90000 @ 10000-14000
[ 0.000000] RAMDISK: 37579000 - 37feff98
[ 0.000000] ACPI: RSDP 00000000000fae70 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ff90000 00038 (v01 MSTEST TESTONLY 09000830 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ff90200 00084 (v02 MSTEST OEMFACP 09000830 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ff9e000 00040
[ 0.000000] ACPI: APIC 000000007ff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ff90000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff90000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 0000000000029ff7] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007ff90000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a414] TEXT DATA BSS ==> [0001000000 - 000168a414]
[ 0.000000] #3 [0037579000 - 0037feff98] RAMDISK ==> [0037579000 - 0037feff98]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b290] BRK ==> [000168b000 - 000168b290]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ff90
[ 0.000000] On node 0 totalpages: 524063
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3826 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 512969 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516795
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/lainie-sqroot ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2049360k/2096704k available (3079k kernel code, 452k absent, 46892k reserved, 1892k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3400.654 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6801.30 BogoMIPS (lpj=13602616)
[ 0.004020] Security Framework initialized
[ 0.004025] SELinux: Disabled at boot.
[ 0.004130] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005119] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005570] Mount-cache hash table entries: 256
[ 0.005683] Initializing cgroup subsys ns
[ 0.005687] Initializing cgroup subsys cpuacct
[ 0.005690] Initializing cgroup subsys devices
[ 0.005691] Initializing cgroup subsys freezer
[ 0.005692] Initializing cgroup subsys net_cls
[ 0.005711] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005712] CPU: L2 cache: 3072K
[ 0.005714] CPU 0/0x0 -> Node 0
[ 0.005716] CPU: Physical Processor ID: 0
[ 0.005717] CPU: Processor Core ID: 0
[ 0.005719] mce: CPU supports 6 MCE banks
[ 0.005724] CPU0: Thermal monitoring enabled (TM2)
[ 0.005728] using mwait in idle threads.
[ 0.005729] Performance Events: Core2 events, Intel PMU driver.
[ 0.005732] ... version: 2
[ 0.005733] ... bit width: 40
[ 0.005734] ... generic registers: 2
[ 0.005735] ... value mask: 000000ffffffffff
[ 0.005736] ... max period: 000000007fffffff
[ 0.005737] ... fixed-purpose events: 3
[ 0.005738] ... event mask: 0000000700000003
[ 0.006414] ACPI: Core revision 20090903
[ 0.016064] Setting APIC routing to flat
[ 0.016353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057555] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.060001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.144019] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.144024] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.148083] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.008000] Initializing CPU#2
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 2/0x2 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 2
[ 0.008000] CPU2: Thermal monitoring enabled (TM2)
[ 0.236040] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.236045] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.240056] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.008000] Initializing CPU#3
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 3/0x3 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 3
[ 0.008000] CPU3: Thermal monitoring enabled (TM2)
[ 0.328084] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.328089] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.332010] Brought up 4 CPUs
[ 0.332012] Total of 4 processors activated (27205.34 BogoMIPS).
[ 0.333166] CPU0 attaching sched-domain:
[ 0.333168] domain 0: span 0-1 level MC
[ 0.333170] groups: 0 1
[ 0.333172] domain 1: span 0-3 level CPU
[ 0.333174] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.333179] CPU1 attaching sched-domain:
[ 0.333180] domain 0: span 0-1 level MC
[ 0.333181] groups: 1 0
[ 0.333183] domain 1: span 0-3 level CPU
[ 0.333184] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.333188] CPU2 attaching sched-domain:
[ 0.333189] domain 0: span 2-3 level MC
[ 0.333190] groups: 2 3
[ 0.333192] domain 1: span 0-3 level CPU
[ 0.333194] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.333197] CPU3 attaching sched-domain:
[ 0.333198] domain 0: span 2-3 level MC
[ 0.333199] groups: 3 2
[ 0.333201] domain 1: span 0-3 level CPU
[ 0.333203] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.333284] devtmpfs: initialized
[ 0.333707] regulator: core version 0.5
[ 0.333707] NET: Registered protocol family 16
[ 0.333707] ACPI: bus type pci registered
[ 0.333707] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.333707] PCI: Not using MMCONFIG.
[ 0.333707] PCI: Using configuration type 1 for base access
[ 0.336030] bio: create slab <bio-0> at 0
[ 0.336398] ACPI: EC: Look up EC in DSDT
[ 0.337818] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.345201] ACPI: Interpreter enabled
[ 0.345203] ACPI: (supports S0 S1 S4 S5)
[ 0.345219] ACPI: Using IOAPIC for interrupt routing
[ 0.345253] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.346769] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.350216] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.354757] ACPI Warning: Incorrect checksum in table [OEMB] - DB, should be DA (20090903/tbutils-314)
[ 0.354833] ACPI: No dock devices found.
[ 0.354912] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.354972] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.354974] pci 0000:00:01.0: PME# disabled
[ 0.355015] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbcfc000-0xfbcfffff]
[ 0.355043] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.355046] pci 0000:00:1b.0: PME# disabled
[ 0.355088] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.355090] pci 0000:00:1c.0: PME# disabled
[ 0.355135] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.355137] pci 0000:00:1c.4: PME# disabled
[ 0.355169] pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f]
[ 0.355202] pci 0000:00:1d.1: reg 20 io port: [0xb800-0xb81f]
[ 0.355236] pci 0000:00:1d.2: reg 20 io port: [0xb880-0xb89f]
[ 0.355270] pci 0000:00:1d.3: reg 20 io port: [0xbc00-0xbc1f]
[ 0.355308] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbcfbc00-0xfbcfbfff]
[ 0.355344] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.355346] pci 0000:00:1d.7: PME# disabled
[ 0.355433] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.355436] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.355438] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.355474] pci 0000:00:1f.2: reg 10 io port: [0xa480-0xa487]
[ 0.355478] pci 0000:00:1f.2: reg 14 io port: [0xa400-0xa403]
[ 0.355481] pci 0000:00:1f.2: reg 18 io port: [0xa080-0xa087]
[ 0.355485] pci 0000:00:1f.2: reg 1c io port: [0xa000-0xa003]
[ 0.355489] pci 0000:00:1f.2: reg 20 io port: [0x9c00-0x9c0f]
[ 0.355492] pci 0000:00:1f.2: reg 24 io port: [0x9880-0x988f]
[ 0.355505] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.355508] pci 0000:00:1f.2: PME# disabled
[ 0.355521] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.355532] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.355558] pci 0000:00:1f.5: reg 10 io port: [0xb400-0xb407]
[ 0.355562] pci 0000:00:1f.5: reg 14 io port: [0xb080-0xb083]
[ 0.355565] pci 0000:00:1f.5: reg 18 io port: [0xb000-0xb007]
[ 0.355569] pci 0000:00:1f.5: reg 1c io port: [0xac00-0xac03]
[ 0.355573] pci 0000:00:1f.5: reg 20 io port: [0xa880-0xa88f]
[ 0.355576] pci 0000:00:1f.5: reg 24 io port: [0xa800-0xa80f]
[ 0.355590] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.355592] pci 0000:00:1f.5: PME# disabled
[ 0.355621] pci 0000:00:01.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.355651] pci 0000:03:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.355660] pci 0000:03:00.0: reg 18 64bit mmio: [0xfbee0000-0xfbeeffff]
[ 0.355665] pci 0000:03:00.0: reg 20 io port: [0xd000-0xd0ff]
[ 0.355674] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfbec0000-0xfbedffff]
[ 0.355695] pci 0000:03:00.0: supports D1 D2
[ 0.355731] pci 0000:03:00.1: reg 10 64bit mmio: [0xfbefc000-0xfbefffff]
[ 0.355770] pci 0000:03:00.1: supports D1 D2
[ 0.360058] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.360061] pci 0000:00:1c.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 0.360065] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.360153] pci 0000:02:00.0: reg 24 32bit mmio: [0xfbdfe000-0xfbdfffff]
[ 0.360160] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbde0000-0xfbdeffff]
[ 0.360186] pci 0000:02:00.0: PME# supported from D3hot
[ 0.360190] pci 0000:02:00.0: PME# disabled
[ 0.360233] pci 0000:02:00.1: reg 10 io port: [0xcc00-0xcc07]
[ 0.360240] pci 0000:02:00.1: reg 14 io port: [0xc880-0xc883]
[ 0.360247] pci 0000:02:00.1: reg 18 io port: [0xc800-0xc807]
[ 0.360254] pci 0000:02:00.1: reg 1c io port: [0xc480-0xc483]
[ 0.360260] pci 0000:02:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.360317] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.360369] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 0.360371] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
[ 0.360400] pci 0000:04:02.0: reg 10 io port: [0xec00-0xec1f]
[ 0.360405] pci 0000:04:02.0: reg 14 io port: [0xe880-0xe8ff]
[ 0.360436] pci 0000:04:02.0: supports D2
[ 0.360464] pci 0000:04:03.0: reg 10 32bit mmio: [0xfbfff800-0xfbffffff]
[ 0.360469] pci 0000:04:03.0: reg 14 32bit mmio: [0xfbff8000-0xfbffbfff]
[ 0.360502] pci 0000:04:03.0: supports D1 D2
[ 0.360503] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.360506] pci 0000:04:03.0: PME# disabled
[ 0.360539] pci 0000:04:04.0: reg 10 32bit mmio: [0xfbff4000-0xfbff7fff]
[ 0.360544] pci 0000:04:04.0: reg 14 io port: [0xe400-0xe4ff]
[ 0.360563] pci 0000:04:04.0: reg 30 32bit mmio pref: [0xfbfc0000-0xfbfdffff]
[ 0.360580] pci 0000:04:04.0: supports D1 D2
[ 0.360581] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.360584] pci 0000:04:04.0: PME# disabled
[ 0.360618] pci 0000:00:1e.0: transparent bridge
[ 0.360621] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.360623] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.360638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.360730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.360765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.360837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.360877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.363254] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.363325] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.363395] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.363465] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.363535] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.363608] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.363677] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.363748] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.363819] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.363823] vgaarb: loaded
[ 0.363831] PCI: Using ACPI for IRQ routing
[ 0.364011] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.364013] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.368015] Switching to clocksource tsc
[ 0.368820] pnp: PnP ACPI init
[ 0.368834] ACPI: bus type pnp registered
[ 0.370602] pnp: PnP ACPI: found 14 devices
[ 0.370603] ACPI: ACPI bus type pnp unregistered
[ 0.370615] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.370620] system 00:07: ioport range 0x290-0x297 has been reserved
[ 0.370624] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.370626] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.370627] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.370629] system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved
[ 0.370631] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.370633] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.370635] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.370637] system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved
[ 0.370639] system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved
[ 0.370642] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.370644] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.370648] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.370652] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.370654] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.370656] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.370658] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.375376] pci 0000:04:04.0: BAR 6: address space collision on of device [0xfbfc0000-0xfbfdffff]
[ 0.375441] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.375442] pci 0000:00:01.0: IO window: disabled
[ 0.375444] pci 0000:00:01.0: MEM window: disabled
[ 0.375446] pci 0000:00:01.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff
[ 0.375449] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.375451] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.375454] pci 0000:00:1c.0: MEM window: 0xfbe00000-0xfbefffff
[ 0.375457] pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.375461] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[ 0.375462] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.375465] pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff
[ 0.375468] pci 0000:00:1c.4: PREFETCH window: 0x00000080000000-0x000000801fffff
[ 0.375472] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.375474] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.375477] pci 0000:00:1e.0: MEM window: 0xfbf00000-0xfbffffff
[ 0.375480] pci 0000:00:1e.0: PREFETCH window: 0x80200000-0x802fffff
[ 0.375489] alloc irq_desc for 16 on node -1
[ 0.375492] alloc kstat_irqs on node -1
[ 0.375496] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.375498] pci 0000:00:01.0: setting latency timer to 64
[ 0.375503] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.375506] pci 0000:00:1c.0: setting latency timer to 64
[ 0.375511] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.375514] pci 0000:00:1c.4: setting latency timer to 64
[ 0.375518] pci 0000:00:1e.0: setting latency timer to 64
[ 0.375520] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.375522] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.375523] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.375525] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.375526] pci_bus 0000:03: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 0.375528] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.375529] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.375531] pci_bus 0000:02: resource 1 mem: [0xfbd00000-0xfbdfffff]
[ 0.375532] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
[ 0.375533] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.375535] pci_bus 0000:04: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.375536] pci_bus 0000:04: resource 2 pref mem [0x80200000-0x802fffff]
[ 0.375538] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.375539] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.375559] NET: Registered protocol family 2
[ 0.375642] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.376059] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.377479] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.377965] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.377967] TCP reno registered
[ 0.378068] NET: Registered protocol family 1
[ 0.378162] pci 0000:03:00.0: Boot video device
[ 0.378220] Unpacking initramfs...
[ 0.532131] Freeing initrd memory: 10715k freed
[ 0.536075] audit: initializing netlink socket (disabled)
[ 0.536087] type=2000 audit(1296753391.535:1): initialized
[ 0.538093] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.539063] VFS: Disk quotas dquot_6.5.2
[ 0.539096] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.539149] msgmni has been set to 4023
[ 0.539418] alg: No test for stdrng (krng)
[ 0.539459] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.539462] io scheduler noop registered
[ 0.539463] io scheduler anticipatory registered
[ 0.539464] io scheduler deadline registered
[ 0.539482] io scheduler cfq registered (default)
[ 0.539553] alloc irq_desc for 24 on node -1
[ 0.539555] alloc kstat_irqs on node -1
[ 0.539562] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.539566] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.539626] alloc irq_desc for 25 on node -1
[ 0.539627] alloc kstat_irqs on node -1
[ 0.539632] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.539636] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.539710] alloc irq_desc for 26 on node -1
[ 0.539711] alloc kstat_irqs on node -1
[ 0.539715] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.539720] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.540687] Linux agpgart interface v0.103
[ 0.540722] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.540796] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.540995] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.541107] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.541141] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.541142] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.541600] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.541650] mice: PS/2 mouse device common for all mice
[ 0.541677] rtc_cmos 00:03: RTC can wake from S4
[ 0.541697] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.541716] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.541726] cpuidle: using governor ladder
[ 0.541727] cpuidle: using governor menu
[ 0.541730] No iBFT detected.
[ 0.541918] TCP cubic registered
[ 0.541983] NET: Registered protocol family 10
[ 0.542256] lo: Disabled Privacy Extensions
[ 0.542414] Mobile IPv6
[ 0.542416] NET: Registered protocol family 17
[ 0.542462] PM: Resume from disk failed.
[ 0.542468] registered taskstats version 1
[ 0.542748] rtc_cmos 00:03: setting system clock to 2011-02-03 17:16:32 UTC (1296753392)
[ 0.542770] Initalizing network drop monitor service
[ 0.542799] Freeing unused kernel memory: 592k freed
[ 0.542947] Write protecting the kernel read-only data: 4236k
[ 0.565950] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.586992] udev[79]: starting version 164
[ 0.625231] usbcore: registered new interface driver usbfs
[ 0.625264] usbcore: registered new interface driver hub
[ 0.625302] usbcore: registered new device driver usb
[ 0.626214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.626253] alloc irq_desc for 23 on node -1
[ 0.626255] alloc kstat_irqs on node -1
[ 0.626263] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.626281] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.626283] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.626303] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.626328] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.630213] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.630227] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfbc00
[ 0.634388] SCSI subsystem initialized
[ 0.642616] libata version 3.00 loaded.
[ 0.643302] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.643310] alloc irq_desc for 17 on node -1
[ 0.643311] alloc kstat_irqs on node -1
[ 0.643317] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.643346] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 0.643396] scsi0 : pata_jmicron
[ 0.643457] scsi1 : pata_jmicron
[ 0.643847] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.643875] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.643877] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.643878] usb usb1: Product: EHCI Host Controller
[ 0.643879] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.643881] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.643945] usb usb1: configuration #1 chosen from 1 choice
[ 0.643967] hub 1-0:1.0: USB hub found
[ 0.643972] hub 1-0:1.0: 8 ports detected
[ 0.644046] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
[ 0.644048] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
[ 0.644658] ata_piix 0000:00:1f.2: version 2.13
[ 0.644677] alloc irq_desc for 19 on node -1
[ 0.644679] alloc kstat_irqs on node -1
[ 0.644687] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.644691] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.644728] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.644777] scsi2 : ata_piix
[ 0.644818] scsi3 : ata_piix
[ 0.645695] skge 0000:04:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.645729] skge 1.13 addr 0xfbff4000 irq 19 chip Yukon-Lite rev 9
[ 0.646138] skge eth0: addr 00:17:31:67:bb:30
[ 0.646256] ata3: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0x9c00 irq 19
[ 0.646259] ata4: SATA max UDMA/133 cmd 0xa080 ctl 0xa000 bmdma 0x9c08 irq 19
[ 0.646294] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.646297] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.646339] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.646374] scsi4 : ata_piix
[ 0.646411] scsi5 : ata_piix
[ 0.647297] ata5: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 19
[ 0.647299] ata6: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 19
[ 0.647985] ahci 0000:02:00.0: version 3.0
[ 0.648000] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.663853] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.663856] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.663861] ahci 0000:02:00.0: setting latency timer to 64
[ 0.664009] scsi6 : ahci
[ 0.664085] scsi7 : ahci
[ 0.664153] ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16
[ 0.664155] ata8: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16
[ 0.728760] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.728816] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.728826] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.728828] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.728837] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.728861] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 0.728893] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.728894] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.728895] usb usb2: Product: UHCI Host Controller
[ 0.728897] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.728898] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.728947] usb usb2: configuration #1 chosen from 1 choice
[ 0.728966] hub 2-0:1.0: USB hub found
[ 0.728970] hub 2-0:1.0: 2 ports detected
[ 0.729006] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.729010] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.729012] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.729017] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.729035] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
[ 0.729053] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.729055] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.729056] usb usb3: Product: UHCI Host Controller
[ 0.729057] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.729058] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.729092] usb usb3: configuration #1 chosen from 1 choice
[ 0.729108] hub 3-0:1.0: USB hub found
[ 0.729112] hub 3-0:1.0: 2 ports detected
[ 0.729139] alloc irq_desc for 18 on node -1
[ 0.729140] alloc kstat_irqs on node -1
[ 0.729145] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.729149] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.729151] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.729155] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.729179] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 0.729197] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.729199] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.729200] usb usb4: Product: UHCI Host Controller
[ 0.729201] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.729202] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.729235] usb usb4: configuration #1 chosen from 1 choice
[ 0.729250] hub 4-0:1.0: USB hub found
[ 0.729254] hub 4-0:1.0: 2 ports detected
[ 0.729287] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.729295] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.729297] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.729301] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.729320] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 0.729339] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.729341] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.729342] usb usb5: Product: UHCI Host Controller
[ 0.729343] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.729344] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.729420] usb usb5: configuration #1 chosen from 1 choice
[ 0.729456] hub 5-0:1.0: USB hub found
[ 0.729460] hub 5-0:1.0: 2 ports detected
[ 0.816325] ata1.00: ATAPI: ATAPI DVD RW 4XMax, 2.11, max UDMA/33
[ 0.816349] ata1.01: ATAPI: PLEXTOR DVD-ROM PX-130A, 1.01, max UDMA/100
[ 0.832337] ata1.00: configured for UDMA/33
[ 0.848338] ata1.01: configured for UDMA/100
[ 0.864736] scsi 0:0:0:0: CD-ROM ATAPI DVD RW 4XMax 2.11 PQ: 0 ANSI: 5
[ 0.865562] scsi 0:0:1:0: CD-ROM PLEXTOR DVD-ROM PX-130A 1.01 PQ: 0 ANSI: 5
[ 0.978304] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.983808] ata8: SATA link down (SStatus 0 SControl 300)
[ 0.987808] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.132036] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.156268] ata6.00: HPA detected: current 625140335, native 625142448
[ 1.156272] ata6.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 1.156275] ata6.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.164283] ata6.00: configured for UDMA/133
[ 1.197007] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.444065] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.444077] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.444083] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.444092] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 1.452399] ata3.00: ATA-7: WDC WD2500JS-00NCB1, 10.02E02, max UDMA/133
[ 1.452400] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.460290] ata3.00: configured for UDMA/133
[ 1.460355] scsi 2:0:0:0: Direct-Access ATA WDC WD2500JS-00N 10.0 PQ: 0 ANSI: 5
[ 1.495420] ata4.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
[ 1.495422] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.562076] ata4.00: configured for UDMA/133
[ 1.562166] scsi 3:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 1.562336] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 1.564958] alloc irq_desc for 21 on node -1
[ 1.564960] alloc kstat_irqs on node -1
[ 1.564966] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.568996] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.569038] sd 2:0:0:0: [sda] Write Protect is off
[ 1.569043] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.569050] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.569068] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.569075] sd 5:0:0:0: [sdc] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 1.569151] sd 5:0:0:0: [sdc] Write Protect is off
[ 1.569153] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.569172] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.569175] sda:
[ 1.569179] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.569181] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.569194] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.569326] sdc:
[ 1.569403] sdb:
[ 1.572483] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.572508] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.572530] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.572551] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.572571] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 1.573755] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.573758] Uniform CD-ROM driver Revision: 3.20
[ 1.573826] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.579268] sr1: scsi3-mmc drive: 0x/50x cd/rw xa/form2 cdda tray
[ 1.579341] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1.593737] sda1 sda2 sda3
[ 1.593937] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.601723] sdb1 sdb2 sdb3
[ 1.601942] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.620096] sdc1 sdc2 sdc3 < sdc5
[ 1.636006] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.10
[ 1.645065] sdc6 sdc7 > sdc4
[ 1.703963] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 2.039890] md: raid0 personality registered for level 0
[ 2.041735] md: raid1 personality registered for level 1
[ 2.078321] md: md0 stopped.
[ 2.078939] md: bind<sdb3>
[ 2.079075] md: bind<sda3>
[ 2.079893] raid0: looking at sda3
[ 2.079895] raid0: comparing sda3(235882240)
[ 2.079896] with sda3(235882240)
[ 2.079897] raid0: END
[ 2.079897] raid0: ==> UNIQUE
[ 2.079898] raid0: 1 zones
[ 2.079899] raid0: looking at sdb3
[ 2.079900] raid0: comparing sdb3(235882240)
[ 2.079901] with sda3(235882240)
[ 2.079902] raid0: EQUAL
[ 2.079903] raid0: FINAL 1 zones
[ 2.079904] raid0: done.
[ 2.079905] raid0 : md_size is 471764480 sectors.
[ 2.079906] ******* md0 configuration *********
[ 2.079907] zone0=[sda3/sdb3/]
[ 2.079909] zone offset=0kb device offset=0kb size=235882240kb
[ 2.079910] **********************************
[ 2.079910]
[ 2.079915] md0: detected capacity change from 0 to 241543413760
[ 2.080483] md0: unknown partition table
[ 2.103836] md: md1 stopped.
[ 2.136058] firewire_core: created device fw0: GUID 0011d80000c7e76a, S400
[ 2.153551] md: bind<sdb2>
[ 2.153669] md: bind<sda2>
[ 2.154446] raid1: raid set md1 active with 2 out of 2 mirrors
[ 2.154459] md1: detected capacity change from 0 to 129029898240
[ 2.154965] md1: unknown partition table
[ 2.159604] device-mapper: uevent: version 1.0.3
[ 2.159749] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.333414] PM: Starting manual resume from disk
[ 2.333416] PM: Resume from partition 8:34
[ 2.333417] PM: Checking hibernation image.
[ 2.333583] PM: Error -22 checking image file
[ 2.333585] PM: Resume from disk failed.
[ 2.359403] kjournald starting. Commit interval 5 seconds
[ 2.359406] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.553078] usb 3-1: New USB device found, idVendor=0463, idProduct=ffff
[ 2.553081] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 2.553083] usb 3-1: Product: ELLIPSE
[ 2.553084] usb 3-1: Manufacturer: MGE OPS SYSTEMS
[ 2.553086] usb 3-1: SerialNumber: BDCJ510H2
[ 2.553169] usb 3-1: configuration #1 chosen from 1 choice
[ 2.800009] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 2.976077] usb 3-2: New USB device found, idVendor=046d, idProduct=c00e
[ 2.976079] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.976081] usb 3-2: Product: USB-PS/2 Optical Mouse
[ 2.976082] usb 3-2: Manufacturer: Logitech
[ 2.976141] usb 3-2: configuration #1 chosen from 1 choice
[ 3.488407] udev[526]: starting version 164
[ 3.617128] ACPI: SSDT 000000007ff9e0c0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 3.617303] processor LNXCPU:00: registered as cooling_device0
[ 3.617644] ACPI: SSDT 000000007ff9e290 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 3.617797] processor LNXCPU:01: registered as cooling_device1
[ 3.618014] ACPI:
[ 3.618016] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 3.618018] SSDT 000000007ff9e3d0 0013A (v01 AMI CPU3PM 00000001 INTL 20060113)
[ 3.618023] ACPI: Power Button [PWRB]
[ 3.618416] processor LNXCPU:02: registered as cooling_device2
[ 3.618453] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.618456] ACPI: Power Button [PWRF]
[ 3.618843] ACPI: SSDT 000000007ff9e510 0013A (v01 AMI CPU4PM 00000001 INTL 20060113)
[ 3.619037] processor LNXCPU:03: registered as cooling_device3
[ 3.756340] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.890239] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 3.890246] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.890249] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[ 3.890294] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.127331] usbcore: registered new interface driver hiddev
[ 4.225281] [drm] Initialized drm 1.1.0 20060810
[ 4.539044] [drm] radeon kernel modesetting enabled.
[ 4.539120] radeon 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.539126] radeon 0000:03:00.0: setting latency timer to 64
[ 4.540764] [drm] radeon: Initializing kernel modesetting.
[ 4.540995] [drm] register mmio base: 0xFBEE0000
[ 4.540996] [drm] register mmio size: 65536
[ 4.545808] ATOM BIOS: 11X
[ 4.545820] [drm] Clocks initialized !
[ 4.547079] [drm] Detected VRAM RAM=256M, BAR=256M
[ 4.547082] [drm] RAM width 256bits DDR
[ 4.547434] [TTM] Zone kernel: Available graphics memory: 1030334 kiB.
[ 4.547448] [drm] radeon: 256M of VRAM memory ready
[ 4.547449] [drm] radeon: 512M of GTT memory ready.
[ 4.547500] alloc irq_desc for 27 on node -1
[ 4.547502] alloc kstat_irqs on node -1
[ 4.547519] radeon 0000:03:00.0: irq 27 for MSI/MSI-X
[ 4.547525] radeon 0000:03:00.0: radeon: using MSI.
[ 4.547559] [drm] radeon: irq initialized.
[ 4.547561] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.548192] [drm] Loading RV670 Microcode
[ 4.548195] platform radeon_cp.0: firmware: requesting radeon/RV670_pfp.bin
[ 4.576297] r600_cp: Failed to load firmware "radeon/RV670_pfp.bin"
[ 4.576344] [drm:r600_startup] *ERROR* Failed to load firmware!
[ 4.576385] radeon 0000:03:00.0: disabling GPU acceleration
[ 4.576453] radeon 0000:03:00.0: ffff88007e484000 unpin not necessary
[ 4.576455] radeon 0000:03:00.0: ffff88007e484000 unpin not necessary
[ 4.576466] [drm] Enabling audio support
[ 4.576542] [drm] Default TV standard: PAL
[ 4.576585] [drm] Radeon Display Connectors
[ 4.576586] [drm] Connector 0:
[ 4.576587] [drm] DVI-I
[ 4.576588] [drm] HPD1
[ 4.576589] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 4.576590] [drm] Encoders:
[ 4.576591] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 4.576592] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 4.576593] [drm] Connector 1:
[ 4.576594] [drm] DIN
[ 4.576594] [drm] Encoders:
[ 4.576595] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 4.576596] [drm] Connector 2:
[ 4.576597] [drm] DVI-I
[ 4.576597] [drm] HPD2
[ 4.576599] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 4.576600] [drm] Encoders:
[ 4.576601] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.576602] [drm] DFP2: INTERNAL_LVTM1
[ 4.861779] alloc irq_desc for 22 on node -1
[ 4.861782] alloc kstat_irqs on node -1
[ 4.861789] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.861816] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.934541] [drm] fb mappable at 0xD0040000
[ 4.934543] [drm] vram apper at 0xD0000000
[ 4.934544] [drm] size 9216000
[ 4.934544] [drm] fb depth is 24
[ 4.934545] [drm] pitch is 7680
[ 4.970647] Console: switching to colour frame buffer device 240x75
[ 4.972733] ICE1724 0000:04:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.992869] fb0: radeondrmfb frame buffer device
[ 4.992870] registered panic notifier
[ 4.992873] [drm] Initialized radeon 2.0.0 20080528 for 0000:03:00.0 on minor 0
[ 5.282412] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 5.284530] HDA Intel 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.284551] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 7.810209] generic-usb 0003:0463:FFFF.0001: hiddev0,hidraw0: USB HID v1.00 Device [MGE OPS SYSTEMS ELLIPSE] on usb-0000:00:1d.1-1/input0
[ 7.823294] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
[ 7.823348] generic-usb 0003:046D:C00E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 7.823362] usbcore: registered new interface driver usbhid
[ 7.823364] usbhid: v2.6:USB HID core driver
[ 8.242560] Adding 1951888k swap on /dev/sdc2. Priority:-1 extents:1 across:1951888k
[ 8.375818] EXT3 FS on dm-0, internal journal
[ 8.664965] loop: module loaded
[ 9.326945] general protection fault: 0000 [#1] SMP
[ 9.327095] last sysfs file: /sys/devices/virtual/block/dm-3/removable
[ 9.327207] CPU 2
[ 9.327272] Modules linked in: loop firewire_sbp2 dm_crypt snd_hda_codec_atihdmi snd_hda_codec_analog snd_ice1724 snd_seq_midi snd_seq_midi_event snd_rawmidi snd_ice17xx_ak4xxx snd_ac97_codec snd_hda_intel ac97_bus snd_ak4xxx_adda snd_hda_codec snd_ak4114 snd_pt2258 snd_hwdep snd_i2c snd_pcm radeon ttm snd_seq drm_kms_helper snd_timer snd_seq_device drm snd usbhid i2c_algo_bit soundcore snd_page_alloc i2c_i801 pcspkr hid i2c_core evdev button processor asus_atk0110 ext3 jbd mbcache dm_mod raid1 raid0 md_mod sg sr_mod sd_mod crc_t10dif cdrom firewire_ohci firewire_core uhci_hcd ata_generic ahci crc_itu_t skge ata_piix pata_jmicron libata scsi_mod thermal ehci_hcd usbcore nls_base thermal_sys [last unloaded: scsi_wait_scan]
[ 9.329008] Pid: 1068, comm: vgchange Not tainted 2.6.32-5-amd64 #1 System Product Name
[ 9.329008] RIP: 0010:[<ffffffff810e7c50>] [<ffffffff810e7c50>] __kmalloc+0xd2/0x141
[ 9.329008] RSP: 0018:ffff88007e541b88 EFLAGS: 00010086
[ 9.329008] RAX: 0000000000000000 RBX: f000eef3f000eef3 RCX: 0000000000000008
[ 9.329008] RDX: ffff8800019120b0 RSI: 00000000000000d0 RDI: ffffffff811966fd
[ 9.329008] RBP: 0000000000000246 R08: 0000000000000002 R09: ffffffff813a1db4
[ 9.329008] R10: 0000000000000004 R11: ffff88007e9ff960 R12: ffffffff81453f10
[ 9.329008] R13: 00000000000000d0 R14: 00000000000000d0 R15: 0000000000000006
[ 9.329008] FS: 00007f82a6b7d7a0(0000) GS:ffff880001900000(0000) knlGS:0000000000000000
[ 9.329008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9.329008] CR2: 00007f82a6b91000 CR3: 000000007e99a000 CR4: 00000000000406e0
[ 9.329008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9.329008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 9.329008] Process vgchange (pid: 1068, threadinfo ffff88007e540000, task ffff8800377bf810)
[ 9.329008] Stack:
[ 9.329008] ffffffffffffffff ffffffff811966fd 00000008fffff801 00000000000000d0
[ 9.329008] <0> ffff88007e541c78 0000000000000006 ffffffff813a1db4 ffff8800378b8058
[ 9.329008] <0> ffffc90012409030 ffffffff811966fd 00000000000000d0 ffff88007e541c7c
[ 9.329008] Call Trace:
[ 9.329008] [<ffffffff811966fd>] ? kvasprintf+0x41/0x68
[ 9.329008] [<ffffffff811966fd>] ? kvasprintf+0x41/0x68
[ 9.329008] [<ffffffff8118f627>] ? kobject_set_name_vargs+0x22/0x56
[ 9.329008] [<ffffffff8118f670>] ? kobject_add_varg+0x15/0x40
[ 9.329008] [<ffffffff8118f777>] ? kobject_add+0x74/0x7c
[ 9.329008] [<ffffffff8114133f>] ? internal_create_group+0xdc/0x15a
[ 9.329008] [<ffffffff8118f3df>] ? kobject_get+0x12/0x17
[ 9.329008] [<ffffffff81180a03>] ? blk_register_queue+0x5f/0xcc
[ 9.329008] [<ffffffff81184869>] ? add_disk+0xb8/0x108
[ 9.329008] [<ffffffffa0192048>] ? dm_create+0x420/0x545 [dm_mod]
[ 9.329008] [<ffffffffa0197690>] ? dev_create+0x0/0x2e9 [dm_mod]
[ 9.329008] [<ffffffffa01976f9>] ? dev_create+0x69/0x2e9 [dm_mod]
[ 9.329008] [<ffffffffa0197690>] ? dev_create+0x0/0x2e9 [dm_mod]
[ 9.329008] [<ffffffffa0197bf0>] ? ctl_ioctl+0x1c6/0x20e [dm_mod]
[ 9.329008] [<ffffffffa0197c46>] ? dm_ctl_ioctl+0xe/0x12 [dm_mod]
[ 9.329008] [<ffffffff810fa68e>] ? vfs_ioctl+0x21/0x6c
[ 9.329008] [<ffffffff810fabdc>] ? do_vfs_ioctl+0x48d/0x4cb
[ 9.335570] [<ffffffff810f1e4f>] ? sys_newstat+0x23/0x30
[ 9.335570] [<ffffffff810fac6b>] ? sys_ioctl+0x51/0x70
[ 9.335570] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[ 9.335570] Code: fa 66 0f 1f 44 00 00 65 8b 04 25 a8 e3 00 00 48 98 49 8b 94 c4 f0 02 00 00 8b 4a 18 89 4c 24 14 48 8b 1a 48 85 db 74 0c 8b 42 14 <48> 8b 04 c3 48 89 02 eb 19 48 8b 4c 24 08 49 89 d0 44 89 ee 83
[ 9.335570] RIP [<ffffffff810e7c50>] __kmalloc+0xd2/0x141
[ 9.335570] RSP <ffff88007e541b88>
[ 9.335570] ---[ end trace efff86078497c7c4 ]---
/dev/mapper/lainie-sqroot on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
archive-olDebian
archive-sauvegardes
control
hmint-lhmint
lainie-sqroot


All times are GMT. The time now is 03:36 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.