FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 02-01-2011, 02:27 PM
Johann Glaser
 
Default Bug#611732: linux-image-2.6.32-5-amd64: PCI interrupt problem with e1000e driver

Package: linux-2.6
Version: 2.6.32-30
Severity: normal

After installing Debian on my PC the network card sometimes refuses to work.
dmesg shows the following problem:
e1000e 0000:00:19.0: PCI INT A disabled
e1000e: probe of 0000:00:19.0 failed with error -3
Rebooting the PC always helps, then the PCI problems disappear. It seems that
the problem only appears if the PC was switched off before for a longer time
(e.g. during night). Switching off the PC for a few seconds doesn't let the
problem reappear.

I'm using an Intel Core i7 860 CPU with an on-board Intel 82578DC Gigabit
Network controller. Previously I had Ubuntu 9.10 installed which I now replaced
with Debian sid. Ubuntu used linux-image-2.6.31-22-generic (AMD64) which never
had these problems. In Debian I now use linux-image-2.6.32-5-amd64 which shows
the mentioned problem. Upgrading to the experimental 2.6.37 is (currently) not
possible due to missing nvidia kernel module packages for this version.

I'll attach the full kernel boot output with the problem and one without the
problem. In the latter one I rearranged some output lines and modified some
numbers (times, bogo-mips) to match the former one. The remaining differences
are for the e1000e driver and a difference in the CPU MCA banks.



-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/vg0-debroot ro quiet

** Tainted: P (1)
* Proprietary module has been loaded.

** Kernel log:
[ 5.978810] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.978814] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=nonew ns=io+mem
[ 5.979039] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.31 Thu Jun 3 08:19:50 PDT 2010
[ 6.424877] usbcore: registered new interface driver snd-usb-audio
[ 6.934274] Adding 9767512k swap on /dev/sda2. Priority:-1 extents:1 across:9767512k
[ 7.339385] loop: module loaded
[ 7.542143] usb-storage: device scan complete
[ 7.542812] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 7.543475] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 7.544061] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 7.544681] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 7.544989] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 7.545076] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 7.545158] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 7.545259] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 7.547540] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7.548160] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 7.549402] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 7.550032] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 9.107392] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 9.169282] EXT4-fs (dm-6): mounted filesystem with ordered data mode
[ 9.173772] EXT4-fs (dm-2): mounted filesystem with ordered data mode
[ 9.220151] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[ 9.222987] EXT4-fs (dm-5): mounted filesystem with ordered data mode
[ 9.225878] EXT4-fs (dm-7): mounted filesystem with ordered data mode
[ 9.974878] e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
[ 10.030614] e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
[ 10.032142] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.067200] fuse init (API version 7.13)
[ 10.799311] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 11.544621] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 11.544626] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 11.547605] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.183004] input: G15 Extra Keys as /devices/virtual/input/input8
[ 14.954008] Bluetooth: Core ver 2.15
[ 14.954162] NET: Registered protocol family 31
[ 14.954165] Bluetooth: HCI device and connection manager initialized
[ 14.954170] Bluetooth: HCI socket layer initialized
[ 15.000990] Bluetooth: L2CAP ver 2.14
[ 15.000994] Bluetooth: L2CAP socket layer initialized
[ 15.021751] Bluetooth: RFCOMM TTY layer initialized
[ 15.021760] Bluetooth: RFCOMM socket layer initialized
[ 15.021763] Bluetooth: RFCOMM ver 1.11
[ 15.331496] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.331500] Bluetooth: BNEP filters: protocol multicast
[ 15.653542] Bluetooth: SCO (Voice Link) ver 0.6
[ 15.653546] Bluetooth: SCO socket layer initialized
[ 15.831430] lp: driver loaded but no devices found
[ 15.942528] ppdev: user-space parallel port driver
[ 21.549625] eth0: no IPv6 routers present
[ 23.135560] CPU0 attaching NULL sched-domain.
[ 23.135566] CPU1 attaching NULL sched-domain.
[ 23.135570] CPU2 attaching NULL sched-domain.
[ 23.135573] CPU3 attaching NULL sched-domain.
[ 23.135576] CPU4 attaching NULL sched-domain.
[ 23.135579] CPU5 attaching NULL sched-domain.
[ 23.135582] CPU6 attaching NULL sched-domain.
[ 23.135585] CPU7 attaching NULL sched-domain.
[ 23.211159] CPU0 attaching sched-domain:
[ 23.211164] domain 0: span 0-1 level SIBLING
[ 23.211168] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 23.211177] domain 1: span 0-7 level MC
[ 23.211180] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178)
[ 23.211194] CPU1 attaching sched-domain:
[ 23.211197] domain 0: span 0-1 level SIBLING
[ 23.211201] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 23.211208] domain 1: span 0-7 level MC
[ 23.211211] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178)
[ 23.211224] CPU2 attaching sched-domain:
[ 23.211227] domain 0: span 2-3 level SIBLING
[ 23.211230] groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[ 23.211238] domain 1: span 0-7 level MC
[ 23.211241] groups: 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 23.211254] CPU3 attaching sched-domain:
[ 23.211257] domain 0: span 2-3 level SIBLING
[ 23.211260] groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[ 23.211267] domain 1: span 0-7 level MC
[ 23.211270] groups: 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 23.211283] CPU4 attaching sched-domain:
[ 23.211286] domain 0: span 4-5 level SIBLING
[ 23.211289] groups: 4 (cpu_power = 589) 5 (cpu_power = 589)
[ 23.211297] domain 1: span 0-7 level MC
[ 23.211300] groups: 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 23.211313] CPU5 attaching sched-domain:
[ 23.211315] domain 0: span 4-5 level SIBLING
[ 23.211319] groups: 5 (cpu_power = 589) 4 (cpu_power = 589)
[ 23.211326] domain 1: span 0-7 level MC
[ 23.211329] groups: 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 23.211342] CPU6 attaching sched-domain:
[ 23.211345] domain 0: span 6-7 level SIBLING
[ 23.211348] groups: 6 (cpu_power = 589) 7 (cpu_power = 589)
[ 23.211355] domain 1: span 0-7 level MC
[ 23.211358] groups: 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178)
[ 23.211371] CPU7 attaching sched-domain:
[ 23.211374] domain 0: span 6-7 level SIBLING
[ 23.211377] groups: 7 (cpu_power = 589) 6 (cpu_power = 589)
[ 23.211385] domain 1: span 0-7 level MC
[ 23.211388] groups: 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178)
[ 247.383006] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 358.071827] CE: hpet increasing min_delta_ns to 15000 nsec

** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corp.
bios_version: WBIBX10J.86A.0122.2009.0802.2219
board_vendor: Intel Corporation
board_name: DP55WB
board_version: AAE64798-204

** Loaded modules:
Module Size Used by
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
sco 7209 2
bnep 9427 2
rfcomm 29597 0
l2cap 24736 6 bnep,rfcomm
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
rfkill 13044 3 bluetooth
fuse 50625 1
acpi_cpufreq 5571 0
adt7475 13260 0
loop 11799 0
firewire_sbp2 11514 0
snd_usb_audio 64070 2
snd_pcm 60503 2 snd_usb_audio
snd_page_alloc 6249 1 snd_pcm
snd_usb_lib 13928 1 snd_usb_audio
snd_seq_midi 4400 0
snd_seq_midi_event 4628 1 snd_seq_midi
snd_rawmidi 15515 2 snd_usb_lib,snd_seq_midi
snd_hwdep 5380 1 snd_usb_audio
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 46446 10 snd_usb_audio,snd_pcm,snd_rawmidi,snd_hwdep,snd_se q,snd_timer,snd_seq_device
soundcore 4598 1 snd
nvidia 10670090 42
i2c_i801 7830 0
i2c_core 15712 3 adt7475,nvidia,i2c_i801
uinput 6376 2
evdev 7352 15
button 4650 0
pcspkr 1699 0
processor 29935 9 acpi_cpufreq
ext4 289033 7
mbcache 5050 1 ext4
jbd2 67015 1 ext4
crc16 1319 2 l2cap,ext4
usb_storage 39625 0
dm_mod 53754 22
usbhid 33292 0
hid 63225 1 usbhid
sg 18744 0
sr_mod 12602 0
sd_mod 29889 4
cdrom 29415 1 sr_mod
crc_t10dif 1276 1 sd_mod
ata_generic 3047 0
firewire_ohci 19676 0
ata_piix 21124 4
firewire_core 36848 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
libata 133632 2 ata_generic,ata_piix
ehci_hcd 31151 0
scsi_mod 122149 6 firewire_sbp2,usb_storage,sg,sr_mod,sd_mod,libata
usbcore 122034 7 snd_usb_audio,snd_usb_lib,usb_storage,usbhid,ehci_ hcd
e1000e 110047 0
nls_base 6377 1 usbcore
thermal 11674 0
thermal_sys 11942 2 processor,thermal

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e2000000-e30fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000e1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:19.0 Ethernet controller [0200]: Intel Corporation 82578DC Gigabit Network Connection [8086:10f0] (rev 05)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at e3200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e3224000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 2020 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e3225400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
Subsystem: Intel Corporation Device [8086:0034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e3220000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e3300000-e34fffff
Prefetchable memory behind bridge: 00000000e3500000-00000000e36fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: e3700000-e38fffff
Prefetchable memory behind bridge: 00000000e3900000-00000000e3afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.6 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 [8086:3b4e] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: e3b00000-e3cfffff
Prefetchable memory behind bridge: 00000000e3d00000-00000000e3efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e3225000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: e3100000-e31fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b02] (rev 05)
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b20] (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 2098 [size=8]
Region 1: I/O ports at 20ac [size=4]
Region 2: I/O ports at 2090 [size=8]
Region 3: I/O ports at 20a8 [size=4]
Region 4: I/O ports at 2070 [size=16]
Region 5: I/O ports at 2060 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e3225800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2000 [size=32]
Kernel driver in use: i801_smbus

00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller [8086:3b26] (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 2088 [size=8]
Region 1: I/O ports at 20a4 [size=4]
Region 2: I/O ports at 2080 [size=8]
Region 3: I/O ports at 20a0 [size=4]
Region 4: I/O ports at 2050 [size=16]
Region 5: I/O ports at 2040 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

01:00.0 VGA compatible controller [0300]: nVidia Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Device [1acc:27d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
[virtual] Expansion ROM at e3080000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia

01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio Controller [10de:0be3] (rev a1)
Subsystem: Device [1acc:27d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>

05:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:4257]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e3104000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e3100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci


** USB devices:
Bus 002 Device 004: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 001 Device 003: ID 046d:0a07 Logitech, Inc.
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_AT.utf8, LC_CTYPE=de_AT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/vg0-debroot ro quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf671000 (usable)
BIOS-e820: 00000000cf671000 - 00000000cf6bf000 (reserved)
BIOS-e820: 00000000cf6bf000 - 00000000cf6d7000 (usable)
BIOS-e820: 00000000cf6d7000 - 00000000cf7bf000 (ACPI NVS)
BIOS-e820: 00000000cf7bf000 - 00000000cf7e8000 (usable)
BIOS-e820: 00000000cf7e8000 - 00000000cf7f2000 (ACPI data)
BIOS-e820: 00000000cf7f2000 - 00000000cf7f3000 (usable)
BIOS-e820: 00000000cf7f3000 - 00000000cf7ff000 (ACPI data)
BIOS-e820: 00000000cf7ff000 - 00000000cf800000 (usable)
BIOS-e820: 00000000cf800000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100002000 - 0000000230000000 (usable)
DMI 2.5 present.
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask F00000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcf800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cf800000
0000000000 - 00cf800000 page 2M
kernel direct mapping tables up to cf800000 @ 8000-d000
init_memory_mapping: 0000000100000000-0000000230000000
0100000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ b000-15000
RAMDISK: 37666000 - 37feff8d
ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
ACPI: XSDT 00000000cf7fd120 0006C (v01 INTEL WBIBX10J 0000007A 01000013)
ACPI: FACP 00000000cf7fc000 000F4 (v03 INTEL WBIBX10J 0000007A MSFT 0100000D)
ACPI: DSDT 00000000cf7f8000 03432 (v02 INTEL WBIBX10J 0000007A MSFT 0100000D)
ACPI: FACS 00000000cf76c000 00040
ACPI: APIC 00000000cf7f7000 000BC (v02 INTEL WBIBX10J 0000007A MSFT 0100000D)
ACPI: WDDT 00000000cf7f6000 00040 (v01 INTEL WBIBX10J 0000007A MSFT 0100000D)
ACPI: MCFG 00000000cf7f5000 0003C (v01 INTEL WBIBX10J 0000007A MSFT 0100000D)
ACPI: ASF! 00000000cf7f4000 000A5 (v32 INTEL WBIBX10J 0000007A MSFT 0100000D)
ACPI: HPET 00000000cf7f3000 00038 (v01 INTEL WBIBX10J 0000007A MSFT 0100000D)
ACPI: ASPT 00000000cf7f1000 00034 (v05 INTEL WBIBX10J 0000007A MSFT 0100000D)
ACPI: WDTT 00000000cf7f0000 00224 (v02 INTEL WBIBX10J 0000007A MSFT 0100000D)
ACPI: SSDT 00000000cf7e9000 06F74 (v01 INTEL SSDT PM 0000007A MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000230000000
Bootmem setup node 0 0000000000000000-0000000230000000
NODE_DATA [0000000000010000 - 0000000000017fff]
bootmap [0000000000018000 - 000000000005dfff] pages 46
(8 early reservations) ==> bootmem [0000000000 - 0230000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000168a414] TEXT DATA BSS ==> [0001000000 - 000168a414]
#3 [0037666000 - 0037feff8d] RAMDISK ==> [0037666000 - 0037feff8d]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#5 [000168b000 - 000168b15e] BRK ==> [000168b000 - 000168b15e]
#6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
#7 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000]
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880001800000-ffff8800089fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000000 -> 0x0000008f
0: 0x00000100 -> 0x000cf671
0: 0x000cf6bf -> 0x000cf6d7
0: 0x000cf7bf -> 0x000cf7e8
0: 0x000cf7f2 -> 0x000cf7f3
0: 0x000cf7ff -> 0x000cf800
0: 0x00100002 -> 0x00230000
On node 0 totalpages: 2094657
DMA zone: 56 pages used for memmap
DMA zone: 108 pages reserved
DMA zone: 3819 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 831212 pages, LIFO batch:31
Normal zone: 17024 pages used for memmap
Normal zone: 1228158 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cf671000 - 00000000cf6bf000
PM: Registered nosave memory: 00000000cf6d7000 - 00000000cf7bf000
PM: Registered nosave memory: 00000000cf7e8000 - 00000000cf7f2000
PM: Registered nosave memory: 00000000cf7f3000 - 00000000cf7ff000
PM: Registered nosave memory: 00000000cf800000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100002000
Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880008c00000 s90328 r8192 d24360 u262144
pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063189
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/vg0-debroot ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880008dde000 - ffff88000cdde000
software IO TLB at phys 0x8dde000 - 0xcdde000
Memory: 8178056k/9175040k available (3079k kernel code, 796412k absent, 200572k reserved, 1892k data, 592k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2800.026 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.05 BogoMIPS (lpj=11200104)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 -> Node 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0x1 -> Node 0
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/0x2 -> Node 0
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/0x3 -> Node 0
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4 APIC 0x4 ip 0x6000
Initializing CPU#4
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 4/0x4 -> Node 0
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU4: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5 APIC 0x5 ip 0x6000
Initializing CPU#5
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 5/0x5 -> Node 0
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU5: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6 APIC 0x6 ip 0x6000
Initializing CPU#6
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 6/0x6 -> Node 0
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU6: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 7/0x7 -> Node 0
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU7: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Brought up 8 CPUs
Total of 8 processors activated (44799.93 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 2-3 level SIBLING
groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 2-3 level SIBLING
groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178)
CPU4 attaching sched-domain:
domain 0: span 4-5 level SIBLING
groups: 4 (cpu_power = 589) 5 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
CPU5 attaching sched-domain:
domain 0: span 4-5 level SIBLING
groups: 5 (cpu_power = 589) 4 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
CPU6 attaching sched-domain:
domain 0: span 6-7 level SIBLING
groups: 6 (cpu_power = 589) 7 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178)
CPU7 attaching sched-domain:
domain 0: span 6-7 level SIBLING
groups: 7 (cpu_power = 589) 6 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178)
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xe3200000-0xe321ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xe3224000-0xe3224fff]
pci 0000:00:19.0: reg 18 io port: [0x2020-0x203f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xe3225400-0xe32257ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xe3220000-0xe3223fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xe3225000-0xe32253ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x2098-0x209f]
pci 0000:00:1f.2: reg 14 io port: [0x20ac-0x20af]
pci 0000:00:1f.2: reg 18 io port: [0x2090-0x2097]
pci 0000:00:1f.2: reg 1c io port: [0x20a8-0x20ab]
pci 0000:00:1f.2: reg 20 io port: [0x2070-0x207f]
pci 0000:00:1f.2: reg 24 io port: [0x2060-0x206f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xe3225800-0xe32258ff]
pci 0000:00:1f.3: reg 20 io port: [0x2000-0x201f]
pci 0000:00:1f.5: reg 10 io port: [0x2088-0x208f]
pci 0000:00:1f.5: reg 14 io port: [0x20a4-0x20a7]
pci 0000:00:1f.5: reg 18 io port: [0x2080-0x2087]
pci 0000:00:1f.5: reg 1c io port: [0x20a0-0x20a3]
pci 0000:00:1f.5: reg 20 io port: [0x2050-0x205f]
pci 0000:00:1f.5: reg 24 io port: [0x2040-0x204f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xe0000000-0xe1ffffff]
pci 0000:01:00.0: reg 24 io port: [0x1000-0x107f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfff80000-0xffffffff]
pci 0000:01:00.1: reg 10 32bit mmio: [0xe3000000-0xe3003fff]
pci 0000:00:03.0: bridge io port: [0x1000-0x1fff]
pci 0000:00:03.0: bridge 32bit mmio: [0xe2000000-0xe30fffff]
pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xe1ffffff]
pci 0000:05:03.0: reg 10 32bit mmio: [0xe3104000-0xe31047ff]
pci 0000:05:03.0: reg 14 32bit mmio: [0xe3100000-0xe3103fff]
pci 0000:05:03.0: supports D1 D2
pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xe3100000-0xe31fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
hpet: hpet6 irq 28 for MSI
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed1b000-0xfed1bfff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfed1a000-0xfed1afff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
system 00:01: iomem range 0xc0000-0xdffff has been reserved
system 00:01: iomem range 0xe0000-0xfffff could not be reserved
system 00:01: iomem range 0xff000000-0xffffffff could not be reserved
system 00:06: ioport range 0x500-0x57f has been reserved
system 00:06: ioport range 0x400-0x47f has been reserved
system 00:06: ioport range 0x680-0x6ff has been reserved
pci 0000:01:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
pci 0000:00:03.0: IO window: 0x1000-0x1fff
pci 0000:00:03.0: MEM window: 0xe2000000-0xe30fffff
pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000e1ffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x3000-0x3fff
pci 0000:00:1c.0: MEM window: 0xe3300000-0xe34fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000e3500000-0x000000e36fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.4: IO window: 0x4000-0x4fff
pci 0000:00:1c.4: MEM window: 0xe3700000-0xe38fffff
pci 0000:00:1c.4: PREFETCH window: 0x000000e3900000-0x000000e3afffff
pci 0000:00:1c.6: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.6: IO window: 0x5000-0x5fff
pci 0000:00:1c.6: MEM window: 0xe3b00000-0xe3cfffff
pci 0000:00:1c.6: PREFETCH window: 0x000000e3d00000-0x000000e3efffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xe3100000-0xe31fffff
pci 0000:00:1e.0: PREFETCH window: disabled
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0000 -> 0003)
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: enabling device (0000 -> 0003)
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.6: enabling device (0000 -> 0003)
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:01: resource 1 mem: [0xe2000000-0xe30fffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xe1ffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xe3300000-0xe34fffff]
pci_bus 0000:02: resource 2 pref mem [0xe3500000-0xe36fffff]
pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:03: resource 1 mem: [0xe3700000-0xe38fffff]
pci_bus 0000:03: resource 2 pref mem [0xe3900000-0xe3afffff]
pci_bus 0000:04: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:04: resource 1 mem: [0xe3b00000-0xe3cfffff]
pci_bus 0000:04: resource 2 pref mem [0xe3d00000-0xe3efffff]
pci_bus 0000:05: resource 1 mem: [0xe3100000-0xe31fffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 9767k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1296469873.952:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15991
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.6: irq 32 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
aer 0000:00:03.0cie02: service driver aer loaded
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2011-01-31 10:31:15 UTC (1296469875)
Initalizing network drop monitor service
Freeing unused kernel memory: 592k freed
Write protecting the kernel read-only data: 4236k
udev[116]: starting version 164
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe3225400
libata version 3.00 loaded.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI version 1.10
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 1-1.1: new full speed USB device using ehci_hcd and address 3
usb 1-1.1: New USB device found, idVendor=046d, idProduct=0a07
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: Z-10 USB Speaker
usb 1-1.1: Manufacturer: Logitech
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.3: new low speed USB device using ehci_hcd and address 4
usb 1-1.3: New USB device found, idVendor=046d, idProduct=c505
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: USB Receiver
usb 1-1.3: Manufacturer: Logitech
usb 1-1.3: configuration #1 chosen from 1 choice
e1000e 0000:00:19.0: PCI INT A disabled
e1000e: probe of 0000:00:19.0 failed with error -3
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
firewire_core: created device fw0: GUID 009027000253efff, S400
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x2098 ctl 0x20ac bmdma 0x2070 irq 19
ata2: SATA max UDMA/133 cmd 0x2090 ctl 0x20a8 bmdma 0x2078 irq 19
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xe3225000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x2088 ctl 0x20a4 bmdma 0x2050 irq 19
ata4: SATA max UDMA/133 cmd 0x2080 ctl 0x20a0 bmdma 0x2058 irq 19
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 2-1.5: new high speed USB device using ehci_hcd and address 3
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100
ata1.00: ATA-8: ST31000528AS, CC35, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC35 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL01 PQ: 0 ANSI: 5
usb 2-1.5: New USB device found, idVendor=058f, idProduct=6362
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: Mass Storage Device
usb 2-1.5: Manufacturer: Generic
usb 2-1.5: SerialNumber: 058F312D81B1
usb 2-1.5: configuration #1 chosen from 1 choice
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
generic-usb 0003:046D:0A07.0001: hiddev0,hidraw0: USB HID v1.10 Device [Logitech Z-10 USB Speaker] on usb-0000:00:1a.0-1.1/input2
input: Logitech Z-10 USB Speaker as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.3/input/input1
generic-usb 0003:046D:0A07.0002: input,hidraw1: USB HID v1.10 Device [Logitech Z-10 USB Speaker] on usb-0000:00:1a.0-1.1/input3
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
generic-usb 0003:046D:C505.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input3
generic-usb 0003:046D:C505.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sda1 sda2 sda3
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 2-1.7: new high speed USB device using ehci_hcd and address 4
usb 2-1.7: New USB device found, idVendor=0409, idProduct=005a
usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.7: configuration #1 chosen from 1 choice
hub 2-1.7:1.0: USB hub found
hub 2-1.7:1.0: 4 ports detected
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
PM: Starting manual resume from disk
PM: Resume from partition 8:2
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
EXT4-fs (dm-0): mounted filesystem with ordered data mode
udev[420]: starting version 164
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input6
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=nonew ns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.31 Thu Jun 3 08:19:50 PDT 2010
usbcore: registered new interface driver snd-usb-audio
Adding 9767512k swap on /dev/sda2. Priority:-1 extents:1 across:9767512k
loop: module loaded
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:1: Attached scsi generic sg3 type 0
sd 4:0:0:2: Attached scsi generic sg4 type 0
sd 4:0:0:3: Attached scsi generic sg5 type 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:3: [sde] Attached SCSI removable disk
EXT4-fs (sda1): mounted filesystem with ordered data mode
EXT4-fs (dm-6): mounted filesystem with ordered data mode
EXT4-fs (dm-2): mounted filesystem with ordered data mode
EXT4-fs (dm-3): mounted filesystem with ordered data mode
EXT4-fs (dm-5): mounted filesystem with ordered data mode
EXT4-fs (dm-7): mounted filesystem with ordered data mode
fuse init (API version 7.13)
input: G15 Extra Keys as /devices/virtual/input/input7
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/vg0-debroot ro quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf671000 (usable)
BIOS-e820: 00000000cf671000 - 00000000cf6bf000 (reserved)
BIOS-e820: 00000000cf6bf000 - 00000000cf6d7000 (usable)
BIOS-e820: 00000000cf6d7000 - 00000000cf7bf000 (ACPI NVS)
BIOS-e820: 00000000cf7bf000 - 00000000cf7e8000 (usab
 
Old 02-13-2011, 07:32 PM
Johann Glaser
 
Default Bug#611732: linux-image-2.6.32-5-amd64: PCI interrupt problem with e1000e driver

still not working with 2.6.37-trunk-amd64
(package /var/cache/apt/archives/linux-image-2.6.37-trunk-amd64_2.6.37-1~experimental.1_amd64.deb)





--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 1297629120.2515.1.camel@hansi.donbosco.sth.ac.at"> http://lists.debian.org/1297629120.2515.1.camel@hansi.donbosco.sth.ac.at
 
Old 08-06-2011, 09:17 AM
Johann Glaser
 
Default Bug#611732: linux-image-2.6.32-5-amd64: PCI interrupt problem with e1000e driver

still not working with 3.0.0-1-amd64
(package /var/cache/apt/archives/linux-image-3.0.0-1-amd64_3.0.0-1_amd64.de)






--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 1312622234.3147.2.camel@hansi.donbosco.sth.ac.at"> http://lists.debian.org/1312622234.3147.2.camel@hansi.donbosco.sth.ac.at
 
Old 08-06-2011, 12:54 PM
Jonathan Nieder
 
Default Bug#611732: linux-image-2.6.32-5-amd64: PCI interrupt problem with e1000e driver

found 611732 linux-2.6/2.6.37-1~experimental.1
found 611732 linux-2.6/3.0.0-1
quit

Hi Johann,

Johann Glaser wrote:

> After installing Debian on my PC the network card sometimes refuses to work.
> dmesg shows the following problem:
> e1000e 0000:00:19.0: PCI INT A disabled
> e1000e: probe of 0000:00:19.0 failed with error -3
> Rebooting the PC always helps, then the PCI problems disappear. It seems that
> the problem only appears if the PC was switched off before for a longer time
> (e.g. during night). Switching off the PC for a few seconds doesn't let the
> problem reappear.

Interesting. I suspect v2.6.35-rc1~473^2~251 (e1000e: Reset
82577/82578 PHY before first PHY register read, 2010-05-05) was meant
to address this problem. Alas:

> still not working with 3.0.0-1-amd64

Could you report this to e1000-devel@lists.sourceforge.net, cc-ing
Bruce Allan <bruce.w.allan@intel.com>, Pete Zaitcev
<zaitcev@redhat.com>, and Andy Gospodarek <andy@greyhouse.net> and
either cc this bug log or send the message-id?

Alternatively, if you like the sourceforge bugtracker interface, a
report at the bug tracker under Tracker → Bugs at
<http://e1000.sf.net/> (sending us the bug number) would also work.

Thanks and hope that helps,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110806125418.GB10903@elie.gateway.2wire.net">htt p://lists.debian.org/20110806125418.GB10903@elie.gateway.2wire.net
 
Old 08-06-2011, 04:03 PM
Johann Glaser
 
Default Bug#611732: linux-image-2.6.32-5-amd64: PCI interrupt problem with e1000e driver

Hi!

> Alternatively, if you like the sourceforge bugtracker interface, a
> report at the bug tracker under Tracker → Bugs at
> <http://e1000.sf.net/> (sending us the bug number) would also work.

Thanks. My submission to the SF.net tracker can be reached at
https://sourceforge.net/tracker/?func=detail&aid=3387252&group_id=42302&atid=44744 9

Thanks
Hansi





--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 1312646604.3147.4.camel@hansi.donbosco.sth.ac.at"> http://lists.debian.org/1312646604.3147.4.camel@hansi.donbosco.sth.ac.at
 
Old 08-06-2011, 04:14 PM
Jonathan Nieder
 
Default Bug#611732: linux-image-2.6.32-5-amd64: PCI interrupt problem with e1000e driver

forwarded 611732 http://sourceforge.net/tracker/?func=detail&aid=3387252&group_id=42302&atid=44744 9
quit

Johann Glaser wrote:

> My submission to the SF.net tracker can be reached at
> https://sourceforge.net/tracker/?func=detail&aid=3387252&group_id=42302&atid=44744 9

Thanks much. Marking accordingly.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110806161413.GE10903@elie.gateway.2wire.net">htt p://lists.debian.org/20110806161413.GE10903@elie.gateway.2wire.net
 

Thread Tools




All times are GMT. The time now is 11:39 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org