FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 01-29-2011, 09:50 PM
Pascal BERNARD
 
Default Bug#611493: linux-2.6: 611126 follow-up

Package: linux-2.6
Severity: important



-- System Information:
Debian Release: 6.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

After an upgrade and two successful boots, I thought bug 611126 was over. On one failure
I could log as root when the init-script stopped. The raid was assembled and the root
partition mounted. I could catch the "dmesg" and stored it under /root. It is attached
to this report.

It also happens that the raid is not even assembled, or the init-script does not give
me the opportunity to log on.

With the same grub, I boot another linux system hosted on a standard partition without
any concern, even if its /home is on a lvm/raid1 partition.


The system is usally booting fine if I wait for a minute in grub before booting.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/lainie-sqroot ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ff90000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ff90000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ff90000 @ 10000-14000
[ 0.000000] RAMDISK: 37578000 - 37fef18c
[ 0.000000] ACPI: RSDP 00000000000fae70 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ff90000 00038 (v01 MSTEST TESTONLY 09000830 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ff90200 00084 (v02 MSTEST OEMFACP 09000830 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ff9e000 00040
[ 0.000000] ACPI: APIC 000000007ff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ff90000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff90000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 0000000000029ff7] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007ff90000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a414] TEXT DATA BSS ==> [0001000000 - 000168a414]
[ 0.000000] #3 [0037578000 - 0037fef18c] RAMDISK ==> [0037578000 - 0037fef18c]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b290] BRK ==> [000168b000 - 000168b290]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ff90
[ 0.000000] On node 0 totalpages: 524063
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3826 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 512969 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516795
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/lainie-sqroot ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2049356k/2096704k available (3079k kernel code, 452k absent, 46896k reserved, 1892k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3400.762 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6801.52 BogoMIPS (lpj=13603048)
[ 0.004019] Security Framework initialized
[ 0.004024] SELinux: Disabled at boot.
[ 0.004129] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005117] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005568] Mount-cache hash table entries: 256
[ 0.005682] Initializing cgroup subsys ns
[ 0.005685] Initializing cgroup subsys cpuacct
[ 0.005688] Initializing cgroup subsys devices
[ 0.005689] Initializing cgroup subsys freezer
[ 0.005690] Initializing cgroup subsys net_cls
[ 0.005708] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005709] CPU: L2 cache: 3072K
[ 0.005712] CPU 0/0x0 -> Node 0
[ 0.005713] CPU: Physical Processor ID: 0
[ 0.005714] CPU: Processor Core ID: 0
[ 0.005716] mce: CPU supports 6 MCE banks
[ 0.005722] CPU0: Thermal monitoring enabled (TM2)
[ 0.005725] using mwait in idle threads.
[ 0.005727] Performance Events: Core2 events, Intel PMU driver.
[ 0.005731] ... version: 2
[ 0.005731] ... bit width: 40
[ 0.005732] ... generic registers: 2
[ 0.005733] ... value mask: 000000ffffffffff
[ 0.005734] ... max period: 000000007fffffff
[ 0.005735] ... fixed-purpose events: 3
[ 0.005736] ... event mask: 0000000700000003
[ 0.006413] ACPI: Core revision 20090903
[ 0.016064] Setting APIC routing to flat
[ 0.016354] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057034] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.060001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.144021] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.144026] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.148083] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.008000] Initializing CPU#2
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 2/0x2 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 2
[ 0.008000] CPU2: Thermal monitoring enabled (TM2)
[ 0.236094] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.236098] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.240055] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.008000] Initializing CPU#3
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 3/0x3 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 3
[ 0.008000] CPU3: Thermal monitoring enabled (TM2)
[ 0.328088] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.328092] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.332010] Brought up 4 CPUs
[ 0.332012] Total of 4 processors activated (27205.37 BogoMIPS).
[ 0.333167] CPU0 attaching sched-domain:
[ 0.333170] domain 0: span 0-1 level MC
[ 0.333171] groups: 0 1
[ 0.333174] domain 1: span 0-3 level CPU
[ 0.333175] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.333180] CPU1 attaching sched-domain:
[ 0.333182] domain 0: span 0-1 level MC
[ 0.333183] groups: 1 0
[ 0.333185] domain 1: span 0-3 level CPU
[ 0.333186] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.333190] CPU2 attaching sched-domain:
[ 0.333191] domain 0: span 2-3 level MC
[ 0.333192] groups: 2 3
[ 0.333194] domain 1: span 0-3 level CPU
[ 0.333195] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.333199] CPU3 attaching sched-domain:
[ 0.333200] domain 0: span 2-3 level MC
[ 0.333201] groups: 3 2
[ 0.333203] domain 1: span 0-3 level CPU
[ 0.333204] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.333285] devtmpfs: initialized
[ 0.333707] regulator: core version 0.5
[ 0.333707] NET: Registered protocol family 16
[ 0.333707] ACPI: bus type pci registered
[ 0.333707] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.333707] PCI: Not using MMCONFIG.
[ 0.333707] PCI: Using configuration type 1 for base access
[ 0.336024] bio: create slab <bio-0> at 0
[ 0.336398] ACPI: EC: Look up EC in DSDT
[ 0.337814] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.345203] ACPI: Interpreter enabled
[ 0.345204] ACPI: (supports S0 S1 S4 S5)
[ 0.345220] ACPI: Using IOAPIC for interrupt routing
[ 0.345254] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.346769] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.350207] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.354750] ACPI Warning: Incorrect checksum in table [OEMB] - DB, should be DA (20090903/tbutils-314)
[ 0.354826] ACPI: No dock devices found.
[ 0.354906] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.354966] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.354968] pci 0000:00:01.0: PME# disabled
[ 0.355009] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbcfc000-0xfbcfffff]
[ 0.355037] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.355040] pci 0000:00:1b.0: PME# disabled
[ 0.355082] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.355084] pci 0000:00:1c.0: PME# disabled
[ 0.355129] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.355131] pci 0000:00:1c.4: PME# disabled
[ 0.355163] pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f]
[ 0.355196] pci 0000:00:1d.1: reg 20 io port: [0xb800-0xb81f]
[ 0.355229] pci 0000:00:1d.2: reg 20 io port: [0xb880-0xb89f]
[ 0.355264] pci 0000:00:1d.3: reg 20 io port: [0xbc00-0xbc1f]
[ 0.355301] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbcfbc00-0xfbcfbfff]
[ 0.355337] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.355340] pci 0000:00:1d.7: PME# disabled
[ 0.355427] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.355430] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.355432] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.355467] pci 0000:00:1f.2: reg 10 io port: [0xa480-0xa487]
[ 0.355471] pci 0000:00:1f.2: reg 14 io port: [0xa400-0xa403]
[ 0.355475] pci 0000:00:1f.2: reg 18 io port: [0xa080-0xa087]
[ 0.355479] pci 0000:00:1f.2: reg 1c io port: [0xa000-0xa003]
[ 0.355482] pci 0000:00:1f.2: reg 20 io port: [0x9c00-0x9c0f]
[ 0.355486] pci 0000:00:1f.2: reg 24 io port: [0x9880-0x988f]
[ 0.355499] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.355501] pci 0000:00:1f.2: PME# disabled
[ 0.355514] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.355526] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.355551] pci 0000:00:1f.5: reg 10 io port: [0xb400-0xb407]
[ 0.355555] pci 0000:00:1f.5: reg 14 io port: [0xb080-0xb083]
[ 0.355559] pci 0000:00:1f.5: reg 18 io port: [0xb000-0xb007]
[ 0.355563] pci 0000:00:1f.5: reg 1c io port: [0xac00-0xac03]
[ 0.355566] pci 0000:00:1f.5: reg 20 io port: [0xa880-0xa88f]
[ 0.355570] pci 0000:00:1f.5: reg 24 io port: [0xa800-0xa80f]
[ 0.355583] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.355586] pci 0000:00:1f.5: PME# disabled
[ 0.355615] pci 0000:00:01.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.355645] pci 0000:03:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.355654] pci 0000:03:00.0: reg 18 64bit mmio: [0xfbee0000-0xfbeeffff]
[ 0.355659] pci 0000:03:00.0: reg 20 io port: [0xd000-0xd0ff]
[ 0.355668] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfbec0000-0xfbedffff]
[ 0.355688] pci 0000:03:00.0: supports D1 D2
[ 0.355725] pci 0000:03:00.1: reg 10 64bit mmio: [0xfbefc000-0xfbefffff]
[ 0.355764] pci 0000:03:00.1: supports D1 D2
[ 0.360058] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.360061] pci 0000:00:1c.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 0.360066] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.360153] pci 0000:02:00.0: reg 24 32bit mmio: [0xfbdfe000-0xfbdfffff]
[ 0.360160] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbde0000-0xfbdeffff]
[ 0.360185] pci 0000:02:00.0: PME# supported from D3hot
[ 0.360189] pci 0000:02:00.0: PME# disabled
[ 0.360232] pci 0000:02:00.1: reg 10 io port: [0xcc00-0xcc07]
[ 0.360239] pci 0000:02:00.1: reg 14 io port: [0xc880-0xc883]
[ 0.360246] pci 0000:02:00.1: reg 18 io port: [0xc800-0xc807]
[ 0.360253] pci 0000:02:00.1: reg 1c io port: [0xc480-0xc483]
[ 0.360260] pci 0000:02:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.360315] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.360367] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 0.360370] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
[ 0.360398] pci 0000:04:02.0: reg 10 io port: [0xec00-0xec1f]
[ 0.360403] pci 0000:04:02.0: reg 14 io port: [0xe880-0xe8ff]
[ 0.360434] pci 0000:04:02.0: supports D2
[ 0.360463] pci 0000:04:03.0: reg 10 32bit mmio: [0xfbfff800-0xfbffffff]
[ 0.360468] pci 0000:04:03.0: reg 14 32bit mmio: [0xfbff8000-0xfbffbfff]
[ 0.360500] pci 0000:04:03.0: supports D1 D2
[ 0.360501] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.360504] pci 0000:04:03.0: PME# disabled
[ 0.360538] pci 0000:04:04.0: reg 10 32bit mmio: [0xfbff4000-0xfbff7fff]
[ 0.360543] pci 0000:04:04.0: reg 14 io port: [0xe400-0xe4ff]
[ 0.360561] pci 0000:04:04.0: reg 30 32bit mmio pref: [0xfbfc0000-0xfbfdffff]
[ 0.360579] pci 0000:04:04.0: supports D1 D2
[ 0.360580] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.360583] pci 0000:04:04.0: PME# disabled
[ 0.360617] pci 0000:00:1e.0: transparent bridge
[ 0.360619] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.360622] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.360637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.360729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.360763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.360835] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.360875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.363250] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.363321] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.363391] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.363461] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.363530] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.363603] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.363672] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.363742] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.363813] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.363816] vgaarb: loaded
[ 0.363825] PCI: Using ACPI for IRQ routing
[ 0.364009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.364012] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.372015] Switching to clocksource tsc
[ 0.372822] pnp: PnP ACPI init
[ 0.372836] ACPI: bus type pnp registered
[ 0.374608] pnp: PnP ACPI: found 14 devices
[ 0.374609] ACPI: ACPI bus type pnp unregistered
[ 0.374621] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.374626] system 00:07: ioport range 0x290-0x297 has been reserved
[ 0.374630] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.374632] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.374633] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.374635] system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved
[ 0.374637] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.374639] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.374641] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.374643] system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved
[ 0.374645] system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved
[ 0.374648] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.374650] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.374654] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.374658] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.374660] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.374662] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.374664] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.379383] pci 0000:04:04.0: BAR 6: address space collision on of device [0xfbfc0000-0xfbfdffff]
[ 0.379449] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.379450] pci 0000:00:01.0: IO window: disabled
[ 0.379452] pci 0000:00:01.0: MEM window: disabled
[ 0.379454] pci 0000:00:01.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff
[ 0.379456] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.379458] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.379461] pci 0000:00:1c.0: MEM window: 0xfbe00000-0xfbefffff
[ 0.379464] pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.379468] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[ 0.379470] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.379473] pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff
[ 0.379476] pci 0000:00:1c.4: PREFETCH window: 0x00000080000000-0x000000801fffff
[ 0.379480] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.379482] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.379485] pci 0000:00:1e.0: MEM window: 0xfbf00000-0xfbffffff
[ 0.379488] pci 0000:00:1e.0: PREFETCH window: 0x80200000-0x802fffff
[ 0.379497] alloc irq_desc for 16 on node -1
[ 0.379500] alloc kstat_irqs on node -1
[ 0.379504] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.379506] pci 0000:00:01.0: setting latency timer to 64
[ 0.379511] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.379514] pci 0000:00:1c.0: setting latency timer to 64
[ 0.379519] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.379521] pci 0000:00:1c.4: setting latency timer to 64
[ 0.379526] pci 0000:00:1e.0: setting latency timer to 64
[ 0.379528] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.379530] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.379531] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.379533] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.379534] pci_bus 0000:03: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 0.379536] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.379537] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.379538] pci_bus 0000:02: resource 1 mem: [0xfbd00000-0xfbdfffff]
[ 0.379540] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
[ 0.379541] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.379543] pci_bus 0000:04: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.379544] pci_bus 0000:04: resource 2 pref mem [0x80200000-0x802fffff]
[ 0.379545] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.379547] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.379567] NET: Registered protocol family 2
[ 0.379649] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.380063] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.381496] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.381978] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.381980] TCP reno registered
[ 0.382083] NET: Registered protocol family 1
[ 0.382175] pci 0000:03:00.0: Boot video device
[ 0.382233] Unpacking initramfs...
[ 0.536007] Freeing initrd memory: 10716k freed
[ 0.539950] audit: initializing netlink socket (disabled)
[ 0.539961] type=2000 audit(1296338685.539:1): initialized
[ 0.541968] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.542934] VFS: Disk quotas dquot_6.5.2
[ 0.542966] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.543019] msgmni has been set to 4023
[ 0.543289] alg: No test for stdrng (krng)
[ 0.543328] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.543331] io scheduler noop registered
[ 0.543332] io scheduler anticipatory registered
[ 0.543333] io scheduler deadline registered
[ 0.543351] io scheduler cfq registered (default)
[ 0.543421] alloc irq_desc for 24 on node -1
[ 0.543423] alloc kstat_irqs on node -1
[ 0.543430] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.543434] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.543495] alloc irq_desc for 25 on node -1
[ 0.543496] alloc kstat_irqs on node -1
[ 0.543501] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.543505] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.543579] alloc irq_desc for 26 on node -1
[ 0.543580] alloc kstat_irqs on node -1
[ 0.543584] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.543589] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.544556] Linux agpgart interface v0.103
[ 0.544590] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.544664] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.544862] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.544974] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.545008] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.545009] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.545675] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.545728] mice: PS/2 mouse device common for all mice
[ 0.545755] rtc_cmos 00:03: RTC can wake from S4
[ 0.545773] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.545792] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.545803] cpuidle: using governor ladder
[ 0.545804] cpuidle: using governor menu
[ 0.545807] No iBFT detected.
[ 0.545994] TCP cubic registered
[ 0.546059] NET: Registered protocol family 10
[ 0.546331] lo: Disabled Privacy Extensions
[ 0.546490] Mobile IPv6
[ 0.546492] NET: Registered protocol family 17
[ 0.546536] PM: Resume from disk failed.
[ 0.546542] registered taskstats version 1
[ 0.546822] rtc_cmos 00:03: setting system clock to 2011-01-29 22:04:46 UTC (1296338686)
[ 0.546843] Initalizing network drop monitor service
[ 0.546872] Freeing unused kernel memory: 592k freed
[ 0.547023] Write protecting the kernel read-only data: 4236k
[ 0.568423] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.590715] udev[79]: starting version 164
[ 0.628588] SCSI subsystem initialized
[ 0.630539] usbcore: registered new interface driver usbfs
[ 0.630557] usbcore: registered new interface driver hub
[ 0.630743] usbcore: registered new device driver usb
[ 0.637891] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.637920] alloc irq_desc for 23 on node -1
[ 0.637922] alloc kstat_irqs on node -1
[ 0.637928] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.637940] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.637943] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.637957] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.637982] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.638113] libata version 3.00 loaded.
[ 0.638763] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.641869] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.641881] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfbc00
[ 0.642657] alloc irq_desc for 21 on node -1
[ 0.642659] alloc kstat_irqs on node -1
[ 0.642665] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.645598] ahci 0000:02:00.0: version 3.0
[ 0.645612] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.655861] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.655878] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.655880] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.655882] usb usb1: Product: EHCI Host Controller
[ 0.655883] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.655885] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.655953] usb usb1: configuration #1 chosen from 1 choice
[ 0.655972] hub 1-0:1.0: USB hub found
[ 0.655976] hub 1-0:1.0: 8 ports detected
[ 0.656027] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.656037] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.656039] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.656044] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.656064] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 0.656086] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.656088] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.656089] usb usb2: Product: UHCI Host Controller
[ 0.656090] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.656091] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.656128] usb usb2: configuration #1 chosen from 1 choice
[ 0.656149] hub 2-0:1.0: USB hub found
[ 0.656152] hub 2-0:1.0: 2 ports detected
[ 0.656189] ata_piix 0000:00:1f.2: version 2.13
[ 0.656197] alloc irq_desc for 19 on node -1
[ 0.656199] alloc kstat_irqs on node -1
[ 0.656202] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.656205] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.656237] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.656280] scsi0 : ata_piix
[ 0.656379] scsi1 : ata_piix
[ 0.657821] ata1: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0x9c00 irq 19
[ 0.657825] ata2: SATA max UDMA/133 cmd 0xa080 ctl 0xa000 bmdma 0x9c08 irq 19
[ 0.657851] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.657861] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.657867] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.657874] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.657905] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
[ 0.657927] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.657929] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.657930] usb usb3: Product: UHCI Host Controller
[ 0.657931] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.657932] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.657971] usb usb3: configuration #1 chosen from 1 choice
[ 0.657989] hub 3-0:1.0: USB hub found
[ 0.657993] hub 3-0:1.0: 2 ports detected
[ 0.658038] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.658041] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.658064] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.658105] scsi2 : ata_piix
[ 0.658159] scsi3 : ata_piix
[ 0.659050] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 19
[ 0.659052] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 19
[ 0.659087] alloc irq_desc for 18 on node -1
[ 0.659089] alloc kstat_irqs on node -1
[ 0.659095] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.659100] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.659102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.659108] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.659136] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 0.659159] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.659161] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.659162] usb usb4: Product: UHCI Host Controller
[ 0.659163] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.659164] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.659200] usb usb4: configuration #1 chosen from 1 choice
[ 0.659216] hub 4-0:1.0: USB hub found
[ 0.659220] hub 4-0:1.0: 2 ports detected
[ 0.659252] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.659256] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.659258] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.659264] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.659286] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 0.659305] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.659306] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.659307] usb usb5: Product: UHCI Host Controller
[ 0.659309] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.659310] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.659342] usb usb5: configuration #1 chosen from 1 choice
[ 0.659360] hub 5-0:1.0: USB hub found
[ 0.659363] hub 5-0:1.0: 2 ports detected
[ 0.659818] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.659822] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.659827] ahci 0000:02:00.0: setting latency timer to 64
[ 0.659972] scsi4 : ahci
[ 0.660041] scsi5 : ahci
[ 0.660103] ata5: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16
[ 0.660106] ata6: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16
[ 0.711751] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.10
[ 0.711769] skge 0000:04:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.711810] skge 1.13 addr 0xfbff4000 irq 19 chip Yukon-Lite rev 9
[ 0.712201] skge eth0: addr 00:17:31:67:bb:30
[ 0.740412] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.740417] alloc irq_desc for 17 on node -1
[ 0.740418] alloc kstat_irqs on node -1
[ 0.740422] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.740445] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 0.740572] scsi6 : pata_jmicron
[ 0.740622] scsi7 : pata_jmicron
[ 0.741214] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
[ 0.741216] ata8: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
[ 0.912350] ata7.00: ATAPI: ATAPI DVD RW 4XMax, 2.11, max UDMA/33
[ 0.912373] ata7.01: ATAPI: PLEXTOR DVD-ROM PX-130A, 1.01, max UDMA/100
[ 0.928358] ata7.00: configured for UDMA/33
[ 0.944363] ata7.01: configured for UDMA/100
[ 0.986363] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.986368] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.986394] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.133534] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.140267] ata4.00: HPA detected: current 625140335, native 625142448
[ 1.140272] ata4.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 1.140274] ata4.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.148280] ata4.00: configured for UDMA/133
[ 1.153506] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.212061] firewire_core: created device fw0: GUID 0011d80000c7e76a, S400
[ 1.328913] usb 3-2: New USB device found, idVendor=046d, idProduct=c00e
[ 1.328915] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.328917] usb 3-2: Product: USB-PS/2 Optical Mouse
[ 1.328918] usb 3-2: Manufacturer: Logitech
[ 1.328967] usb 3-2: configuration #1 chosen from 1 choice
[ 1.452065] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.452078] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.452083] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.452093] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.460440] ata1.00: ATA-7: WDC WD2500JS-00NCB1, 10.02E02, max UDMA/133
[ 1.460442] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.468294] ata1.00: configured for UDMA/133
[ 1.468370] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-00N 10.0 PQ: 0 ANSI: 5
[ 1.503758] ata2.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
[ 1.503760] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.570410] ata2.00: configured for UDMA/133
[ 1.570503] scsi 1:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 1.570668] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 1.571717] scsi 6:0:0:0: CD-ROM ATAPI DVD RW 4XMax 2.11 PQ: 0 ANSI: 5
[ 1.572558] scsi 6:0:1:0: CD-ROM PLEXTOR DVD-ROM PX-130A 1.01 PQ: 0 ANSI: 5
[ 1.744048] usbcore: registered new interface driver hiddev
[ 1.746329] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.746353] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.746382] sd 3:0:0:0: [sdc] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 1.746392] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.746394] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.746428] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.746431] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.746433] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.746446] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.746497] sd 0:0:0:0: [sda] Write Protect is off
[ 1.746499] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.746517] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.746586] sdc:
[ 1.746716] sdb:
[ 1.746821] sda:sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.750770] Uniform CD-ROM driver Revision: 3.20
[ 1.750836] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 1.754428] sr1: scsi3-mmc drive: 0x/50x cd/rw xa/form2 cdda tray
[ 1.754487] sr 6:0:1:0: Attached scsi CD-ROM sr1
[ 1.757077] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input2
[ 1.757121] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 1.757138] usbcore: registered new interface driver usbhid
[ 1.757140] usbhid: v2.6:USB HID core driver
[ 1.768319] sdb1 sdb2 sdb3
[ 1.768514] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.771286] sda1 sda2 sda3
[ 1.771468] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.817972] sdc1 sdc2 sdc3 < sdc5 sdc6
[ 1.846632] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.846657] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.846679] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.846699] sr 6:0:0:0: Attached scsi generic sg3 type 5
[ 1.846725] sr 6:0:1:0: Attached scsi generic sg4 type 5
[ 1.862387] sdc7 > sdc4
[ 1.881011] usb 3-1: new low speed USB device using uhci_hcd and address 3
[ 1.893548] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.241368] md: raid0 personality registered for level 0
[ 2.243201] md: raid1 personality registered for level 1
[ 2.293398] md: md0 stopped.
[ 2.293989] md: bind<sdb3>
[ 2.294127] md: bind<sda3>
[ 2.294921] raid0: looking at sda3
[ 2.294922] raid0: comparing sda3(235882240)
[ 2.294924] with sda3(235882240)
[ 2.294924] raid0: END
[ 2.294925] raid0: ==> UNIQUE
[ 2.294926] raid0: 1 zones
[ 2.294927] raid0: looking at sdb3
[ 2.294928] raid0: comparing sdb3(235882240)
[ 2.294929] with sda3(235882240)
[ 2.294930] raid0: EQUAL
[ 2.294930] raid0: FINAL 1 zones
[ 2.294932] raid0: done.
[ 2.294933] raid0 : md_size is 471764480 sectors.
[ 2.294934] ******* md0 configuration *********
[ 2.294935] zone0=[sda3/sdb3/]
[ 2.294937] zone offset=0kb device offset=0kb size=235882240kb
[ 2.294938] **********************************
[ 2.294939]
[ 2.294944] md0: detected capacity change from 0 to 241543413760
[ 2.295476] md0:
[ 2.298705] md: md1 stopped.
[ 2.299440] md: bind<sdb2>
[ 2.299576] md: bind<sda2>
[ 2.300415] raid1: raid set md1 active with 2 out of 2 mirrors
[ 2.300427] md1: detected capacity change from 0 to 129029898240
[ 2.301107] md1: unknown partition table
[ 2.305919] device-mapper: uevent: version 1.0.3
[ 2.306063] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.340143] unknown partition table
[ 2.516718] PM: Starting manual resume from disk
[ 2.516720] PM: Resume from partition 8:34
[ 2.516721] PM: Checking hibernation image.
[ 2.517507] PM: Error -22 checking image file
[ 2.517509] PM: Resume from disk failed.
[ 2.525006] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 2.525008] EXT3-fs: write access will be enabled during recovery.
[ 2.544984] kjournald starting. Commit interval 5 seconds
[ 2.544987] EXT3-fs: recovery complete.
[ 2.545304] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.217870] usb 3-1: New USB device found, idVendor=0463, idProduct=ffff
[ 3.217873] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 3.217875] usb 3-1: Product: ELLIPSE
[ 3.217876] usb 3-1: Manufacturer: MGE OPS SYSTEMS
[ 3.217878] usb 3-1: SerialNumber: BDCJ510H2
[ 3.217948] usb 3-1: configuration #1 chosen from 1 choice
[ 3.799120] udev[511]: starting version 164
[ 3.901304] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 3.901309] ACPI: Power Button [PWRB]
[ 3.901352] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.901355] ACPI: Power Button [PWRF]
[ 3.933548] ACPI: SSDT 000000007ff9e0c0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 3.933716] processor LNXCPU:00: registered as cooling_device0
[ 3.933936] ACPI: SSDT 000000007ff9e290 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 3.934088] processor LNXCPU:01: registered as cooling_device1
[ 3.934299] ACPI: SSDT 000000007ff9e3d0 0013A (v01 AMI CPU3PM 00000001 INTL 20060113)
[ 3.934455] processor LNXCPU:02: registered as cooling_device2
[ 3.934666] ACPI: SSDT 000000007ff9e510 0013A (v01 AMI CPU4PM 00000001 INTL 20060113)
[ 3.934823] processor LNXCPU:03: registered as cooling_device3
[ 3.989521] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.034398] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 4.034404] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.034408] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[ 4.034452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.437357] [drm] Initialized drm 1.1.0 20060810
[ 4.769901] [drm] radeon kernel modesetting enabled.
[ 4.769957] radeon 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.769962] radeon 0000:03:00.0: setting latency timer to 64
[ 4.771705] [drm] radeon: Initializing kernel modesetting.
[ 4.771870] [drm] register mmio base: 0xFBEE0000
[ 4.771871] [drm] register mmio size: 65536
[ 4.776583] ATOM BIOS: 11X
[ 4.776596] [drm] Clocks initialized !
[ 4.777903] [drm] Detected VRAM RAM=256M, BAR=256M
[ 4.777905] [drm] RAM width 256bits DDR
[ 4.777988] [TTM] Zone kernel: Available graphics memory: 1030334 kiB.
[ 4.778006] [drm] radeon: 256M of VRAM memory ready
[ 4.778007] [drm] radeon: 512M of GTT memory ready.
[ 4.778065] alloc irq_desc for 27 on node -1
[ 4.778066] alloc kstat_irqs on node -1
[ 4.778076] radeon 0000:03:00.0: irq 27 for MSI/MSI-X
[ 4.778082] radeon 0000:03:00.0: radeon: using MSI.
[ 4.778113] [drm] radeon: irq initialized.
[ 4.778115] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.778634] [drm] Loading RV670 Microcode
[ 4.778636] platform radeon_cp.0: firmware: requesting radeon/RV670_pfp.bin
[ 4.828650] r600_cp: Failed to load firmware "radeon/RV670_pfp.bin"
[ 4.828695] [drm:r600_startup] *ERROR* Failed to load firmware!
[ 4.828742] radeon 0000:03:00.0: disabling GPU acceleration
[ 4.828809] radeon 0000:03:00.0: ffff880037b2de00 unpin not necessary
[ 4.828811] radeon 0000:03:00.0: ffff880037b2de00 unpin not necessary
[ 4.828824] [drm] Enabling audio support
[ 4.828901] [drm] Default TV standard: PAL
[ 4.828940] [drm] Radeon Display Connectors
[ 4.828941] [drm] Connector 0:
[ 4.828942] [drm] DVI-I
[ 4.828942] [drm] HPD1
[ 4.828944] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 4.828945] [drm] Encoders:
[ 4.828946] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 4.828947] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 4.828948] [drm] Connector 1:
[ 4.828948] [drm] DIN
[ 4.828949] [drm] Encoders:
[ 4.828950] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 4.828951] [drm] Connector 2:
[ 4.828951] [drm] DVI-I
[ 4.828952] [drm] HPD2
[ 4.828953] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 4.828954] [drm] Encoders:
[ 4.828955] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.828956] [drm] DFP2: INTERNAL_LVTM1
[ 4.889948] alloc irq_desc for 22 on node -1
[ 4.889950] alloc kstat_irqs on node -1
[ 4.889956] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.889990] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.194886] [drm] fb mappable at 0xD0040000
[ 5.194888] [drm] vram apper at 0xD0000000
[ 5.194889] [drm] size 9216000
[ 5.194890] [drm] fb depth is 24
[ 5.194891] [drm] pitch is 7680
[ 5.227486] Console: switching to colour frame buffer device 240x75
[ 5.242145] ICE1724 0000:04:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.249981] fb0: radeondrmfb frame buffer device
[ 5.249982] registered panic notifier
[ 5.249986] [drm] Initialized radeon 2.0.0 20080528 for 0000:03:00.0 on minor 0
[ 5.323749] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 5.325896] HDA Intel 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.325918] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 6.900877] generic-usb 0003:0463:FFFF.0002: hiddev0,hidraw1: USB HID v1.00 Device [MGE OPS SYSTEMS ELLIPSE] on usb-0000:00:1d.1-1/input0
[ 7.368658] Adding 1951888k swap on /dev/sdc2. Priority:-1 extents:1 across:1951888k
[ 23.043046] EXT3 FS on dm-0, internal journal
[ 23.264848] general protection fault: 0000 [#1] SMP
[ 23.264990] last sysfs file: /sys/bus/firewire/drivers/sbp2/uevent
[ 23.265106] CPU 0
[ 23.265171] Modules linked in: loop(+) firewire_sbp2 dm_crypt snd_hda_codec_atihdmi snd_hda_codec_analog snd_ice1724 snd_seq_midi snd_seq_midi_event snd_rawmidi snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_hda_intel snd_ak4xxx_adda snd_hda_codec snd_ak4114 radeon snd_hwdep ttm snd_seq snd_pcm drm_kms_helper snd_timer snd_pt2258 snd_seq_device drm snd_i2c i2c_algo_bit snd soundcore snd_page_alloc evdev i2c_i801 pcspkr i2c_core processor asus_atk0110 button ext3 jbd mbcache dm_mod raid1 raid0 md_mod sg sr_mod sd_mod cdrom crc_t10dif usbhid hid ata_generic pata_jmicron ahci skge firewire_ohci firewire_core crc_itu_t ata_piix uhci_hcd ehci_hcd libata usbcore nls_base scsi_mod thermal thermal_sys [last unloaded: scsi_wait_scan]
[ 23.267689] Pid: 1106, comm: modprobe Not tainted 2.6.32-5-amd64 #1 System Product Name
[ 23.267816] RIP: 0010:[<ffffffff810e74ec>] [<ffffffff810e74ec>] __kmalloc_track_caller+0xcd/0x13c
[ 23.267982] RSP: 0018:ffff88007d88dd68 EFLAGS: 00010086
[ 23.268077] RAX: 0000000000000000 RBX: f000eef3f000eef3 RCX: 0000000000000008
[ 23.268191] RDX: ffff880001811d30 RSI: 00000000000000d0 RDI: 0000000000000003
[ 23.268261] RBP: 0000000000000246 R08: 00000000000000d0 R09: ffffffffa04a8960
[ 23.268261] R10: 0000000000000005 R11: fffffffffffffc00 R12: ffffffff81453f10
[ 23.268261] R13: 00000000000000d0 R14: 00000000000000d0 R15: 0000000000000008
[ 23.268261] FS: 00007f46840bf700(0000) GS:ffff880001800000(0000) knlGS:0000000000000000
[ 23.268261] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.268261] CR2: 00007f46840d1000 CR3: 000000006fd3a000 CR4: 00000000000406f0
[ 23.268261] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 23.268261] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 23.268261] Process modprobe (pid: 1106, threadinfo ffff88007d88c000, task ffff88007ddc7100)
[ 23.268261] Stack:
[ 23.268261] 00000000000080d0 ffffffff8107a216 0000000800000600 0000000000000008
[ 23.268261] <0> ffffc90011ec8e27 ffff880037b25000 ffffc90011ec97b0 ffffc90011ec8f70
[ 23.268261] <0> ffff880037b255e8 ffffffff810c6f93 ffffffffa04a8960 ffff880037b254d0
[ 23.268261] Call Trace:
[ 23.268261] [<ffffffff8107a216>] ? load_module+0x14c5/0x18be
[ 23.268261] [<ffffffff810c6f93>] ? kstrdup+0x2b/0x40
[ 23.268261] [<ffffffff8107a216>] ? load_module+0x14c5/0x18be
[ 23.268261] [<ffffffff8107a664>] ? sys_init_module+0x55/0x21a
[ 23.268261] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[ 23.268261] Code: fa 66 0f 1f 44 00 00 65 8b 04 25 a8 e3 00 00 48 98 49 8b 94 c4 f0 02 00 00 8b 4a 18 89 4c 24 14 48 8b 1a 48 85 db 74 0c 8b 42 14 <48> 8b 04 c3 48 89 02 eb 19 48 8b 4c 24 08 49 89 d0 44 89 ee 83
[ 23.268261] RIP [<ffffffff810e74ec>] __kmalloc_track_caller+0xcd/0x13c
[ 23.268261] RSP <ffff88007d88dd68>
[ 23.268261] ---[ end trace 41c4029874257fd5 ]---
[ 23.557847] general protection fault: 0000 [#2] SMP
[ 23.557992] last sysfs file: /sys/devices/virtual/block/dm-0/dev
[ 23.558097] CPU 0
[ 23.558162] Modules linked in: loop(+) firewire_sbp2 dm_crypt snd_hda_codec_atihdmi snd_hda_codec_analog snd_ice1724 snd_seq_midi snd_seq_midi_event snd_rawmidi snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_hda_intel snd_ak4xxx_adda snd_hda_codec snd_ak4114 radeon snd_hwdep ttm snd_seq snd_pcm drm_kms_helper snd_timer snd_pt2258 snd_seq_device drm snd_i2c i2c_algo_bit snd soundcore snd_page_alloc evdev i2c_i801 pcspkr i2c_core processor asus_atk0110 button ext3 jbd mbcache dm_mod raid1 raid0 md_mod sg sr_mod sd_mod cdrom crc_t10dif usbhid hid ata_generic pata_jmicron ahci skge firewire_ohci firewire_core crc_itu_t ata_piix uhci_hcd ehci_hcd libata usbcore nls_base scsi_mod thermal thermal_sys [last unloaded: scsi_wait_scan]
[ 23.560673] Pid: 1110, comm: vgchange Tainted: G D 2.6.32-5-amd64 #1 System Product Name
[ 23.560818] RIP: 0010:[<ffffffff810e7c50>] [<ffffffff810e7c50>] __kmalloc+0xd2/0x141
[ 23.561540] RSP: 0018:ffff88006fcabb98 EFLAGS: 00010086
[ 23.561540] RAX: 0000000000000000 RBX: f000eef3f000eef3 RCX: 0000000000000008
[ 23.561540] RDX: ffff880001811d30 RSI: 00000000000000d0 RDI: ffffffff811966fd
[ 23.561540] RBP: 0000000000000246 R08: 0000000000000004 R09: ffff8800378a7c10
[ 23.561540] R10: 0000000000000000 R11: 00000000000186a0 R12: ffffffff81453f10
[ 23.561540] R13: 00000000000000d0 R14: 00000000000000d0 R15: 0000000000000005
[ 23.561540] FS: 00007fc6d2eaf7a0(0000) GS:ffff880001800000(0000) knlGS:0000000000000000
[ 23.561540] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.649005] CR2: 00007fc6d2ec3000 CR3: 000000007d249000 CR4: 00000000000406f0
[ 23.649005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 23.649005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 23.649005] Process vgchange (pid: 1110, threadinfo ffff88006fcaa000, task ffff8800378e3880)
[ 23.649005] Stack:
[ 23.649005] 0000000000000000 ffffffff811966fd 0000000881459dc0 00000000000000d0
[ 23.649005] <0> ffff88006fcabc68 0000000000000005 ffff8800378a7c0c ffff88006fcabe08
[ 23.649005] <0> ffffc90011f83030 ffffffff811966fd 0000000000000200 ffff88006fcabcd8
[ 23.649005] Call Trace:
[ 23.649005] [<ffffffff811966fd>] ? kvasprintf+0x41/0x68
[ 23.649005] [<ffffffff811966fd>] ? kvasprintf+0x41/0x68
[ 23.649005] [<ffffffff8118f627>] ? kobject_set_name_vargs+0x22/0x56
[ 23.649005] [<ffffffff8121dd00>] ? dev_set_name+0x4d/0x55
[ 23.649005] [<ffffffff811841eb>] ? exact_lock+0x0/0x14
[ 23.649005] [<ffffffff810e7cad>] ? __kmalloc+0x12f/0x141
[ 23.649005] [<ffffffff812226bd>] ? kobj_map+0x67/0x126
[ 23.649005] [<ffffffff812fb175>] ? mutex_lock+0xd/0x31
[ 23.649005] [<ffffffff8122276a>] ? kobj_map+0x114/0x126
[ 23.649005] [<ffffffff811841eb>] ? exact_lock+0x0/0x14
[ 23.649005] [<ffffffff81183e0d>] ? exact_match+0x0/0x5
[ 23.649005] [<ffffffff8113944d>] ? register_disk+0x28/0x12c
[ 23.649005] [<ffffffff81184861>] ? add_disk+0xb0/0x108
[ 23.649005] [<ffffffffa01ba048>] ? dm_create+0x420/0x545 [dm_mod]
[ 23.649005] [<ffffffffa01bf690>] ? dev_create+0x0/0x2e9 [dm_mod]
[ 23.649005] [<ffffffffa01bf6f9>] ? dev_create+0x69/0x2e9 [dm_mod]
[ 23.649005] [<ffffffffa01bf690>] ? dev_create+0x0/0x2e9 [dm_mod]
[ 23.649005] [<ffffffffa01bfbf0>] ? ctl_ioctl+0x1c6/0x20e [dm_mod]
[ 23.649005] [<ffffffffa01bfc46>] ? dm_ctl_ioctl+0xe/0x12 [dm_mod]
[ 23.649005] [<ffffffff810fa68e>] ? vfs_ioctl+0x21/0x6c
[ 23.649005] [<ffffffff810fabdc>] ? do_vfs_ioctl+0x48d/0x4cb
[ 23.649005] [<ffffffff810f1e4f>] ? sys_newstat+0x23/0x30
[ 23.649005] [<ffffffff810fac6b>] ? sys_ioctl+0x51/0x70
[ 23.649005] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[ 23.649005] Code: fa 66 0f 1f 44 00 00 65 8b 04 25 a8 e3 00 00 48 98 49 8b 94 c4 f0 02 00 00 8b 4a 18 89 4c 24 14 48 8b 1a 48 85 db 74 0c 8b 42 14 <48> 8b 04 c3 48 89 02 eb 19 48 8b 4c 24 08 49 89 d0 44 89 ee 83
[ 23.649005] RIP [<ffffffff810e7c50>] __kmalloc+0xd2/0x141
[ 23.649005] RSP <ffff88006fcabb98>
[ 23.649005] ---[ end trace 41c4029874257fd6 ]---
[ 313.120024] stack segment: 0000 [#3] SMP
[ 313.124005] last sysfs file: /sys/devices/virtual/net/lo/operstate
[ 313.124005] CPU 0
[ 313.124005] Modules linked in: loop(+) firewire_sbp2 dm_crypt snd_hda_codec_atihdmi snd_hda_codec_analog snd_ice1724 snd_seq_midi snd_seq_midi_event snd_rawmidi snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_hda_intel snd_ak4xxx_adda snd_hda_codec snd_ak4114 radeon snd_hwdep ttm snd_seq snd_pcm drm_kms_helper snd_timer snd_pt2258 snd_seq_device drm snd_i2c i2c_algo_bit snd soundcore snd_page_alloc evdev i2c_i801 pcspkr i2c_core processor asus_atk0110 button ext3 jbd mbcache dm_mod raid1 raid0 md_mod sg sr_mod sd_mod cdrom crc_t10dif usbhid hid ata_generic pata_jmicron ahci skge firewire_ohci firewire_core crc_itu_t ata_piix uhci_hcd ehci_hcd libata usbcore nls_base scsi_mod thermal thermal_sys [last unloaded: scsi_wait_scan]
[ 313.124005] Pid: 268, comm: khubd Tainted: G D 2.6.32-5-amd64 #1 System Product Name
[ 313.124005] RIP: 0010:[<ffffffff810e6e4a>] [<ffffffff810e6e4a>] kmem_cache_alloc+0x61/0xf0
[ 313.124005] RSP: 0018:ffff88007c855c40 EFLAGS: 00010086
[ 313.124005] RAX: 0000000000000000 RBX: 0000000000000246 RCX: 00000000000000a3
[ 313.220015] RDX: ffff880001811d30 RSI: 0000000000000010 RDI: ffffffff81453f10
[ 313.220015] RBP: f000eef3f000eef3 R08: 0000000000000000 R09: 0000000000000006
[ 313.220015] R10: 0000000000000001 R11: ffff88007cf515a8 R12: 0000000000000010
[ 313.220015] R13: ffffffff81453f10 R14: ffffffffa00525d5 R15: 0000000000000008
[ 313.220015] FS: 0000000000000000(0000) GS:ffff880001800000(0000) knlGS:0000000000000000
[ 313.220015] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 313.220015] CR2: 0000000000618d50 CR3: 000000003767a000 CR4: 00000000000406f0
[ 313.220015] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 313.220015] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 313.220015] Process khubd (pid: 268, threadinfo ffff88007c854000, task ffff88007c868000)
[ 313.220015] Stack:
[ 313.220015] 0000001037825c00 0000000000000006 00000000ffffff92 ffff88007cff7c00
[ 313.220015] <0> 0000000000000004 ffff88007cf510a3 0000000000000000 ffffffffa00525d5
[ 313.220015] <0> 0000000000000000 80000180008a0006 ffff88007cf51000 ffffffff81041b51
[ 313.220015] Call Trace:
[ 313.220015] [<ffffffffa00525d5>] ? usb_control_msg+0x3d/0x135 [usbcore]
[ 313.220015] [<ffffffff81041b51>] ? enqueue_task_fair+0x3e/0x82
[ 313.220015] [<ffffffffa004aca0>] ? hub_port_status+0x7d/0x104 [usbcore]
[ 313.220015] [<ffffffffa004df34>] ? hub_thread+0x22c/0x11bc [usbcore]
[ 313.220015] [<ffffffff81064d2a>] ? autoremove_wake_function+0x0/0x2e
[ 313.220015] [<ffffffffa004dd08>] ? hub_thread+0x0/0x11bc [usbcore]
[ 313.220015] [<ffffffff81064a5d>] ? kthread+0x79/0x81
[ 313.220015] [<ffffffff81011baa>] ? child_rip+0xa/0x20
[ 313.220015] [<ffffffff810649e4>] ? kthread+0x0/0x81
[ 313.220015] [<ffffffff81011ba0>] ? child_rip+0x0/0x20
[ 313.220015] Code: 48 89 c3 fa 66 0f 1f 44 00 00 65 8b 04 25 a8 e3 00 00 48 98 49 8b 94 c5 f0 02 00 00 48 8b 2a 44 8b 7a 18 48 85 ed 74 0d 8b 42 14 <48> 8b 44 c5 00 48 89 02 eb 17 49 89 d0 4c 89 f1 83 ca ff 44 89
[ 313.220015] RIP [<ffffffff810e6e4a>] kmem_cache_alloc+0x61/0xf0
[ 313.220015] RSP <ffff88007c855c40>
[ 313.220015] ---[ end trace 41c4029874257fd7 ]---
[ 313.220015] note: khubd[268] exited with preempt_count 1
 

Thread Tools




All times are GMT. The time now is 09:30 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org