FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 11-18-2010, 02:23 PM
Micah Anderson
 
Default Bug#603927: linux-image-2.6.32-5-xen-686: booting with xen enabled fails to bring up ATA devices

Package: linux-2.6
Version: 2.6.32-27
Severity: normal

If I boot the linux-image-2.6.32-5-xen-686 kernel without Xen (ie. without the
"multiboot /xen-4.0-i386.gz" option set in grub, things boot fine. If I add
that line, the system fails to bring up the ATA devices properly, and it gets
stuck in some crazy loop.

The boot messages from the functioning kernel are attached below, the boot
messages from when Xen is enabled are as follows (note: at some point I had
to stop things):

[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-27) AuthenticAMD
[ 00] Cyrix Cyriges of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] Xen: 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
[ 0.000000] Xen: 00000000f7f80000 - 00000000f8000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fec80000 - 00000000fec81000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] RAMDISK: 0164c000 - 02e0de00
[ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 512MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 20000000
[ 0.000000] low ram: 0 - 20000000
[ 0.000000] node 0 low ram: 00000000 - 20000000
[ 0.000000] node 0 bootmap 00010000 - 00014000
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 0020000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0002e8f000 - 0002eac000] XEN PAGETABLES ==> [0002e8f000 - 0002eac000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #4 [0001000000 - 00015268d4] TEXT DATA BSS ==> [0001000000 - 00015268d4]
[ 0.000000] #5 [000164c000 - 0002e0de00] RAMDISK ==> [000164c000 - 0002e0de00]
[ 0.000000] #6 [0002e0e000 - 0002e8f000] XEN START INFO ==> [0002e0e000 - 0002e8f000]
[ 0.000000] #7 [0001527000 - 0001527114] BRK ==> [0001527000 - 0001527114]
[ 0.000000] #8 [0000100000 - 00001e7000] PGTABLE ==> [0000100000 - 00001e7000]
[ 0.000000] #9 [0000010000 - 0000014000] BOOTMAP ==> [0000010000 - 0000014000]
[ 0.000000] found SMP MP-table at [c00f6ca0] f6ca0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00020000
[ 0.000000] HighMem 0x00020000 -> 0x00020000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID:
[ 0.000000] MPTABLE: Product ID: Kings Canyon
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000.
[ 0.000000] I/O APIC #3 Version 32 at 0xFEC80000.
[ 0.000000] I/O APIC #4 Version 32 at 0xFEC80400.
[ 0.000000] Processors: 1
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:d7ef9000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c32b0000 s37656 r0 d23784 u65536
[ 0.000000] pcpu-alloc: s37656 r0 d23784 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
[ 0.000000] Kernel command line: placeholder root=/dev/mapper/quelea0-root ro console=tty0 console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between c3322000 - c7322000
[ 0.000000] DMA: software IO TLB at phys 0x3322000 - 0x7322000
[ 0.000000] xen_swiotlb_fixup: buf=c3322000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=c7382000 size=32768
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 421776k/524288k available (2631k kernel code, 101704k reserved, 1450k data, 396k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xf5556000 - 0xf57ff000 (2724 kB)
[ 0.000000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf4ffe000 ( 327 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] .init : 0xc13fd000 - 0xc1460000 ( 396 kB)
[ 0.000000] .data : 0xc1291e51 - 0xc13fc998 (1450 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1291e51 (2631 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1536
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 3199.098 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6398.19 BogoMIPS (lpj=12796392)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004270] Initializing cgroup subsys ns
[ 0.008000] Initializing cgroup subsys cpuacct
[ 0.008000] Initializing cgroup subsys devices
[ 0.008000] Initializing cgroup subsys freezer
[ 0.008000] Initializing cgroup subsys net_cls
[ 0.008037] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.012000] CPU: L2 cache: 512K
[ 0.012000] CPU: L3 cache: 1024K
[ 0.012010] CPU: Unsupported number of siblings 2
[ 0.016013] mce: CPU supports 4 MCE banks
[ 0.020039] Performance Events: no PMU driver, software events only.
[ 0.024949] SMP alternatives: switching to UP code
[ 0.028001] Freeing SMP alternatives: 14k freed
[ 0.028468] Brought up 1 CPUs
[ 0.031772] devtmpfs: initialized
[ 0.032844] Grant table initialized
[ 0.036001] regulator: core version 0.5
[ 0.036095] NET: Registered protocol family 16
[ 0.042081] PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=4
[ 0.044001] PCI: Using configuration type 1 for base access
[ 0.044855] bio: create slab <bio-0> at 0
[ 0.048134] ACPI: Interpreter disabled.
[ 0.052141] xen_balloon: Initialising balloon driver with page order 0.
[ 0.056065] vgaarb: loaded
[ 0.058974] PCI: Probing PCI hardware
[ 0.061236] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.064001] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.064644] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.068001] pci 0000:02:03.0: PME# disabled
[ 0.068001] pci 0000:02:03.1: PME# supported from D0 D3hot D3cold
[ 0.068001] pci 0000:02:03.1: PME# disabled
[ 0.068001] pci 0000:00:1e.0: transparent bridge
[ 0.068802] vgaarb: device added: PCI:0000:04:01.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.072213] PCI: Discovered primary peer bus 10 [IRQ]
[ 0.076158] PCI: Discovered primary peer bus 11 [IRQ]
[ 0.080001] PCI: Discovered primary peer bus 12 [IRQ]
[ 0.080001] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2480]
[ 0.080010] pci 0000:00:1f.1: found PCI INT A -> IRQ 7
[ 0.084051] Switching to clocksource xen
[ 0.090871] pnp: PnP ACPI: disabled
[ 0.092001] PnPBIOS: Disabled
[ 0.098142] pci 0000:01:1d.0: PCI bridge, secondary bus 0000:02
[ 0.101452] pci 0000:01:1d.0: IO window: 0x3000-0x3fff
[ 0.101452] pci 0000:01:1d.0: MEM window: 0xfc200000-0xfc7fffff
[ 0.101452] pci 0000:01:1d.0: PREFETCH window: disabled
[ 0.101452] pci 0000:01:1f.0: PCI bridge, secondary bus 0000:03
[ 0.101452] pci 0000:01:1f.0: IO window: 0x4000-0x4fff
[ 0.101452] pci 0000:01:1f.0: MEM window: 0xfc800000-0xfc8fffff
[ 0.101452] pci 0000:01:1f.0: PREFETCH window: 0x20000000-0x200fffff
[ 0.101452] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.101452] pci 0000:00:02.0: IO window: 0x3000-0x4fff
[ 0.101452] pci 0000:00:02.0: MEM window: 0xfc100000-0xfc8fffff
[ 0.101452] pci 0000:00:02.0: PREFETCH window: 0x20000000-0x200fffff
[ 0fff
[ 0.10145es)
[ 0.206200ed (established 1ed
[ 0.343095] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.344020] DMA: Placing 64MB software IO TLB between c3322000 - c7322000
[ 0.344020] DMA: software IO TLB at phys 0x3322000 - 0x7322000
[ 0.362585] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.370987] audit: initializing netlink socket (disabled)
[ 0.376498] type=2000 audit(1290053841.119:1): initialized
[ 0.385030] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.393778] VFS: Disk quotas dquot_6.5.2
[ 0.396007] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.404574] msgmni has been set to 872
[ 0.408762] alg: No test for stdrng (krng)
[ 0.413043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.416944] io scheduler noop registered
[ 0.416944] io scheduler anticipatory registered
[ 0.416944] io scheduler deadline registered
[ 0.433670] io scheduler cfq registered (default)
[ 0.438922] isapnp: Scanning for PnP cards...
[ 0.800386] isapnp: No Plug & Play device found
[ 0.813321] registering netback
[ 0.819572] Linux agpgart interface v0.103
[ 0.823976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.830529] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.834337] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.843200] PNP: No PS/2 controller found. Probing ports directly.
[ 1.100406] serio: i8042 KBD port at 0x60,0x64 ires nvram
[ 1.1otocol family 10
[ 1.143058] lo: Disabled Privacy Extensions
[ 1.147643] Mobile IPv6
[ 1.150171] NET: Registered protocol family 17
[ 1.154730] Using IPI No-Shortcut mode
[ 1.158714] registered taskstats version 1
[ 1.163623] rtc_cmos rtc_cmos: setting system clock to 2010-11-18 04:17:21 UTC (1290053841)
[ 1.172121] Initalizing network drop monitor service
[ 1.177224] Freeing unused kernel memory: 396k freed
[ 1.183969] Write protecting the kernel text: 2632k
[ 1.189426] Write protecting the kernel read-only data: 968k
Loading, please wait...
[ 1.248326] udev[48]: starting version 163
[ 1.499041] usbcore: registered new interface driver usbfs
[ 1.505529] usbcore: registered new interface driver hub
[ 1.511815] usbcore: registered new device driver usb
[ 1.523928] SCSI subsystem initialized
[ 1.550684] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.569853] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 1.572012] Copyright (c) 1999-2006 Intel Corporation.
[ 1.592728] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.611113] aic79xx 0000:03:02.0: found PCI INT A -> IRQ 5
[ 1.612030] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:01.0
[ 1.612030] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:03.0
[ 1.612030] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:03.1
[ 1.612030] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:03:02.1
[ 1.757200] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
[ 1.760007] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:04:01.0
[ 1.760007] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.760007] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.784562] e1000 0000:02:03.0: found PCI INT A -> IRQ 5
[ 1.788461] e1000 0000:02:03.0: sharing IRQ 5 with 0000:02:01.0
[ 1.788461] e1000 0000:02:03.0: sharing IRQ 5 with 0000:02:03.1
[ 1.788461] e1000 0000:02:03.0: sharing IRQ 5 with 0000:03:02.0
[ 1.788461] e1000 0000:02:03.0: sharing IRQ 5 with 0000:03:02.1
[ 1.816751] uhci_hcd 0000:00:1d.0: request interrupt 11 failed
[ 1.820544] uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
[ 1.820544] uhci_hcd 0000:00:1d.0: init 0000:00:1d.0 fail, -38
[ 1.820544] uhci_hcd: probe of 0000:00:1d.0 failed with error -38
[ 1.842416] ata_piix 0000:00:1f.1: found PCI INT A -> IRQ 7
[ 1.849013] scsi0 : ata_piix
[ 1.852664] scsi1 : ata_piix
[ 1.856158] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2060 irq 14
[ 1.860011] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2068 irq 15
[ 1.872469] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.876010] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 1
[ 2.132556] e1000: 0000:02:03.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2d:3e:d2
[ 2.142147] uhci_hcd 0000:00:1d.1: request interrupt 10 failed
[ 2.145264] uhci_hcd 0000:00:1d.1: USB bus 1 deregistered
[ 2.145264] uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -38
[ 2.145264] uhci_hcd: probe of 0000:00:1d.1 failed with error -38
[ 2.167751] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.171687] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 1
[ 2.181803] uhci_hcd 0000:00:1d.2: irq 7, io base 0x00002040
[ 2.188158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.192089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.192089] usb usb1: Product: UHCI Host Controller
[ 2.192089] usb usb1: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[ 2.192089] usb usb1: SerialNumber: 0000:00:1d.2
[ 2.228762] usb usb1: configuration #1 chosen from 1 choice
[ 2.235130] hub 1-0:1.0: USB hub found
[ 2.239350] hub 1-0:1.0: 2 ports detected
[ 2.266301] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 2.274127] sata_mv 0000:02:01.0: version 1.28
[ 2.277900] sata_mv 0000:02:01.0: found PCI INT A -> IRQ 5
[ 2.277900] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:02:03.0
[ 2.277900] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:02:03.1
[ 2.277900] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:03:02.0
[ 2.277900] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:03:02.1
[ 2.313432] sata_mv 0000:02:01.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
[ 2.321949] ata2.00: ATAPI: CD-224E, 1.9A, max UDMA/33
[ 2.332447] scsi3 : sata_mv
[ 2.336027] scsi4 : sata_mv
[ 2.339456] scsi5 : sata_mv
[ 2.342818] ata2.00: configured for UDMA/33
[ 2.354302] scsi6 : sata_mv
[ 2.357747] scsi 1:0:0:0: CD-ROM TEAC CD-224E 1.9A PQ: 0 ANSI: 5
[ 2.371535] scsi7 : sata_mv
[ 2.382529] scsi8 : sata_mv
[ 2.391689] scsi9 : sata_mv
[ 2.399346] scsi10 : sata_mv
[ 2.402872] ata3: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc222000 irq 5
[ 2.406609] ata4: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc224000 irq 5
[ 2.406609] ata5: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc226000 irq 5
[ 2.406609] ata6: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc228000 irq 5
[ 2.406609] ata7: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc232000 irq 5
[ 2.406609] ata8: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc234000 irq 5
[ 2.406609] ata9: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc236000 irq 5
[ 2.406609] ata10: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc238000 irq 5
[ 2.471695] e1000 0000:02:03.1: found PCI INT B -> IRQ 5
[ 2.473886] e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:01.0
[ 2.473886] e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:03.0
[ 2.473886] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.0
[ 2.473886] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.1
[ 2.508785] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 2.512737] Uniform CD-ROM driver Revision: 3.20
[ 2.767020] e1000: 0000:02:03.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2d:3e:d3
[ 2.803144] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.040059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.060081] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA39C, max UDMA/133
[ 3.064011] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.096102] ata3.00: configured for UDMA/133
[ 3.101030] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 3.584052] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.604081] ata4.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
[ 3.608010] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.640103] ata4.00: configured for UDMA/133
[ 3.645002] scsi 4:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 3.972054] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.296054] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.620054] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.944054] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.268054] ata9: SATA link down (SStatus 0 SControl 300)
[ 5.592049] ata10: SATA link down (SStatus 0 SControl 300)
[ 5.635029] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 5.641712] scsi 3:0:0:0: Attached scsi generic sg1 type 0
[ 5.650067] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.659103] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.668170] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 5.674538] sd 4:0:0:0: [sdb] Write Protect is off
[ 5ache: enabled, rltra320 SCSI ada 0000:03:02.1: sharing IRQ 5 with 0000:02:01.0
[ 17.258477] aic79xx 002.408044] scsi11 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 32.408047] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 32.408049] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
[ 35.820011] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 35.820011] ata3.00: failed command: READ FPDMA QUEUED
[ 35.820011] ata3.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 35.820011] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 35.820011] ata3.00: status: { DRDY }
[ 35.820011] ata3: hard resetting link
[ 35.876030] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 35.876030] ata4.00: failed command: READ FPDMA QUEUED
[ 35.876030] ata4.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 35.876030] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 35.876030] ata4.00: status: { DRDY }
[ 35.876030] ata4: hard resetting link
[ 36.340053] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 36.384104] ata3.00: configured for UDMA/133
[ 36.388011] ata3.00: device reported invalid CHS sector 0
[ 36.394842] ata3: EH complete
[ 36.398238] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 36.444106] ata4.00: configured for UDMA/133
[ 36.448011] ata4.00: device reported invalid CHS sector 0
[ 36.454822] ata4: EH complete
[ 38.816054] scsi 2:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 38.820011] scsi 2:0:0:0: Command already completed
[ 48.832048] scsi 2:0:0:0: Attempting0x12 0x0 0x0 0x0 Command already completed
[ 53.860036] scsi2: Device reset timer expired (active 1)
[ 53.864010] scsi2: Device reset returning 0x2003
[ 53.864010] Recovery SCB completes
[ 63.832044] scsi 11:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 63.836010] scsi 11:0:0:0: Command already completed
[ 63.836010] scsi 11:0:0:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 63.836010] scsi11: Device reset code sleeping
[ 66.820009] ata3.00: NCQ disabled due to excessive errors
[ 66.820009] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 66.820009] ata3.00: failed command: READ FPDMA QUEUED
[ 66.820009] ata3.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 66.820009] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 66.820009] ata3.00: status: { DRDY }
[ 66.820009] ata3: hard resetting link
[ 66.881899] ata4.00: NCQ disabled due to excessive errors
[ 66.881899] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 66.881899] ata4.00: failed command: READ FPDMA QUEUED
[ 66.881899] ata4.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 66.881899] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 66.881899] ata4.00: status: { DRDY }
[ 66.881899] ata4: hard resetting link
[ 67.344052] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 67.388105] ata3.00: configured for UDMA/133
[ 67.392010] ata3.00: device reported invalid CHS sector 0
[ 67.398791] ata3: EH complete
[ 67.408053] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 67.452101] ata4.00: configured for UDMA/133
[ 67.456010] ata4.00: device reported invalid CHS sector 0
[ 67.462824] ata4: EH complete
[ 68.864038] scsi11: Device reset timer expired (active 1)
[ 68.868010] scsi11: Device reset returning 0x2003
[ 68.868010] Recovery SCB completes
[ 73.864031] scsi 2:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 73.868010] scsi 2:0:0:0: Command already completed
[ 73.868010] scsi 2:0:0:0: Device offlined - not ready after error recovery
[ 88.868038] scsi 11:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 88.872011] scsi 11:0:0:0: Command already completed
[ 88.872011] scsi 11:0:0:0: Device offlined - not ready after error recovery
[ 94.816051] scsi 2:0:1:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 94.820010] scsi 2:0:1:0: Command already completed
[ 97.820010] ata3: limiting SATA link speed to 1.5 Gbps
[ 97.820010] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 97.820010] ata3.00: failed command: READ DMA
[ 97.820010] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 97.820010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 97.820010] ata3.00: status: { DRDY }
[ 97.820010] ata3: hard resetting link
[ 97.880736] ata4: limiting SATA link speed to 1.5 Gbps
[ 97.880736] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 97.880736] ata4.00: failed command: READ DMA
[ 97.880736] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 97.880736] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 97.880736] ata4.00: status: { DRDY }
[ 97.880736] ata4: hard resetting link
[ 98.344052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 98.388101] ata3.00: configured for UDMA/133
[ 98.392010] ata3.00: device reported invalid CHS sector 0
[ 98.398778] ata3: EH complete
[ 98.404055] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 98.448105] ata4.00: configured for UDMA/133
[ 98.452010] ata4.00: device reported invalid CHS sector 0
[ 98.458821] ata4: EH complete
[ 104.832048] scsi 2:0:1:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 104.836009] scsi 2:0:1:0: Command already completed
[ 104.836009] scsi 2:0:1:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 104.836009] scsi2: Device reset code sleeping
[ 109.816050] scsi 11:0:1:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 109.820009] scsi 11:0:1:0: Command already completed
[ 109.864037] scsi2: Device reset timer expired (active 1)
[ 109.868009] scsi2: Device reset returning 0x2003
[ 109.868009] Recovery SCB completes
[ 119.832030] scsi 11:0:1:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 119.836010] scsi 11:0:1:0: Command already completed
[ 119.836010] scsi 11:0:1:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 119.836010] scsi11: Device reset code sleeping
[ 124.864037] scsi11: Device reset timer expired (active 1)
[ 124.868010] scsi11: Device reset returning 0x2003
[ 124.868010] Recovery SCB completes
[ 128.820009] ata3.00: limiting speed to UDMA/100:PIO4
[ 128.820009] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 128.820009] ata3.00: failed command: READ DMA
[ 128.820009] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 128.820009] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 128.820009] ata3.00: status: { DRDY }
[ 128.820009] ata3: hard resetting link
[ 128.880543] ata4.00: limiting speed to UDMA/100:PIO4
[ 128.880543] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 128.880543] ata4.00: failed command: READ DMA
[ 128.880543] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 128.880543] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 128.880543] ata4.00: status: { DRDY }
[ 128.880543] ata4: hard resetting link
[ 129.344052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 129.388100] ata3.00: configured for UDMA/100
[ 129.392009] ata3.00: device reported invalid CHS sector 0
[ 129.398821] ata3: EH complete
[ 129.412059] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 129.456102] ata4.00: configured for UDMA/100
[ 129.460010] ata4.00: device reported invalid CHS sector 0
[ 129.466822] ata4: EH complete
[ 129.868035] scsi 2:0:1:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 129.872009] scsi 2:0:1:0: Command already completed
[ 129.872009] scsi 2:0:1:0: Device offlined - not ready after error recovery
[ 144.868037] scsi 11:0:1:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 144.872010] scsi 11:0:1:0: Command already completed
[ 144.872010] scsi 11:0:1:0: Device offlined - not ready after error recovery
[ 150.816048] scsi 2:0:2:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 150.820010] scsi 2:0:2:0: Command already completed
[ 159.820009] ata3.00: limiting speed to UDMA/33:PIO4
[ 159.82 dma 4096 in
[ 1limiting speed t0:00/00:00:00:00nk
[ 160.404059] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 160.410953] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 160.448373] ata4.00: configured for UDMA/33
[ 160.452010] ata4.00: device reported invalid CHS sector 0
[ 160.459004] ata4: EH complete
[ 160.468105] ata3.00: configured for UDMA/33
[ 160.472010] ata3.00: device reported invalid CHS sector 0
[ 160.478695] ata3: EH complete
[ 160.832049] scsi 2:0:2:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 160.836010] scsi 2:0:2:0: Command already completed
[ 160.836010] scsi 2:0:2:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 160.836010] scsi2: Device reset code sleeping
[ 165.816040] scsi 11:0:2:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 165.820009] scsi 11:0:2:0: Command already completed
[ 165.864038] scsi2: Device reset timer expired (active 1)
[ 165.868010] scsi2: Device reset returning 0x2003
[ 165.868010] Recovery SCB completes
[ 175.832049] scsi 11:0:2:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 175.836010] scsi 11:0:2:0: Command already completed
[ 175.836010] scsi 11:0:2:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 175.836010] scsi11: Device reset code sleeping
[ 180.864037] scsi11: Device reset timer expired (active 1)
[ 180.868010] scsi11: Device reset returning 0x2003
[ 180.868010] Recovery SCB completes

udevadm settle - timeout of 180 seconds reached, the event queue contains:
/sys/devices/pci0000.0/0000:02:01.0/h.0/0000:01:1d.0/0000:02:01.0/host3/target3:0:0/3:0:0:0/bsg/3:0:0:0 (541)
/sys/devices/pci0000:00/0000:00:02.0/0000:01:1d.0/0000:02:01.0/host3/target3:0:0/3:0:0:0/scsi_generic/sg1 (550)
/sys/devices/pci0000:00/0000:00:02.0/0000:01:1d.0/0000:02:01.0/host3/target3:0:0/3:0:0:0/scsi_disk/3:0:0:0 (554)
/sys/devices/pci0000:00/0000:00:02.0/0000:01:1f.0/0000:03:02.1/host11 (560)
/sys/devices/pci0000:00/0000:00:02.0/0000:01:1f.0/0000:03:02.1/host11/scsi_host/host11 (561)
/sys/devices/pci0000:00/0000:00:02.0/0000:01:1f.0/0000:03:02.1/host11/spi_host/host11 (562)
udevd[48]: worker [57] unexpectedly returned with status 0x0100

udevd[48]: worker [57] failed while handling '/devices/pci0000:00/0000:00:02.0/0000:01:1f.0/0000:03:02.1'

udevd[48]: worker [58] unexpectedly returned with status 0x0100

udevd[48]: worker [58] failed while handling '/devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0/scsi_device/1:0:0:0'

udevd[48]: worker [51] unexpectedly returned with status 0x0100

udevd[48]: worker [51] failed while handling '/devices/pci0000:00/0000:00:02.0/0000:01:1d.0/0000:02:01.0/host3/target3:0:0/3:0:0:0'

[ 185.868036] scsi 2:0:2:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 185.872011] scsi 2:0:2:0: Command already completed
[ 185.872011] scsi 2:0:2:0: Device offlined - not ready after error recovery
[ 190.820010] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 190.820010] ata4.00: failed command: READ DMA
[ 190.820010] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 190.820010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 190.820010] ata4.00: status: { DRDY }
[ 190.820010] ata4: hard resetting link
[ 190.876250] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 190.876250] ata3.00: failed command: READ DMA
[ 190.876250] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 190.876250] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 190.876250] ata3.00: status: { DRDY }
[ 190.876250] ata3: hard resetting link
[ 191.392055] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 191.399001] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 191.436366] ata3.00: configured for UDMA/33
[ 191.440010] ata3.00: device reported invalid CHS sector 0
[ 191.440010] sd 3:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 191.440010] sd 3:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[ 191.440010] Descriptor sense data with sense descriptors (in hex):
[ 191.440010] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 191.440010] 00 00 00 00
[ 191.440010] sd 3:0:0:0: [sda] Add. Sense: No additional sense information
[ 191.440010] sd 3:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 191.440010] end_request: I/O error, dev sda, sector 0
[ 191.440010] Buffer I/O error on device sda, logical block 0
[ 191.440010] ata3: EH complete
[ 191.520102] ata4.00: configured for UDMA/33
[ 191.524011] ata4.00: device reported invalid CHS sector 0
[ 191.524011] sd 4:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 191.524011] sd 4:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
[ 191.524011] Descriptor sense data with sense descriptors (in hex):
[ 191.524011] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 191.524011] 00 00 00 00
[ 191.524011] sd 4:0:0:0: [sdb] Add. Sense: No additional sense information
[ 191.524011] sd 4:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 191.524011] end_request: I/O error, dev sdb, sector 0
[ 191.524011] Buffer I/O error on device sdb, logical block 0
[ 191.524011] ata4: EH complete
[ 200.924033] scsi 11:0:2:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 200.928009] scsi 11:0:2:0: Command already completed
[ 200.928009] scsi 11:0:2:0: Device offlined - not ready after error recovery
[ 206.816034] scsi 2:0:3:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 206.820009] scsi 2:0:3:0: Command already completed
[ 216.832030] scsi 2:0:3:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 216.836009] scsi 2:0:3:0: Command already completed
[ 216.836009] scsi 2:0:3:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 216.836009] scsi2: Device reset code sleeping
[ 221.820010] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 221.820010] ata3.00: failed command: READ DMA
[ 221.820010] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 221.820010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 221.820010] ata3.00: status: { DRDY }
[ 221.820010] ata3: hard resetting link
[ 221.870863] scsi 11:0:3:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 221.874840] scsi 11:0:3:0: Command already completed
[ 221.887981] scsi2: Device reset timer expired (active 1)
[ 221.891952] scsi2: Device reset returning 0x2003
[ 221.891952] Recovery SCB completes
[ 221.914105] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 221.914105] ata4.00: failed command: READ DMA
[ 221.914105] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 221.914105] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 221.914105] ata4.00: status: { DRDY }
[ 221.914105] ata4: hard resetting link
[ 222.376054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 222.420098] ata3.00: configured for UDMA/33
[ 222.424010] ata3.00: device reported invalid CHS sector 0
[ 222.430739] ata3: EH complete
[ 222.434122] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 222.480098] ata4.00: configured for UDMA/33
[ 222.484010] ata4.00: device reported invalid CHS sector 0
[ 222.490631] ata4: EH complete
[ 231.884033] scsi 11:0:3:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 231.888010] scsi 11:0:3:0: Command already completed
[ 231.888010] scsi 11:0:3:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 231.888010] scsi11: Device reset code sleeping
[ 236.916031] scsi11: Device reset timer expired (active 1)
[ 236.920010] scsi11: Device reset returning 0x2003
[ 236.920010] Recovery SCB completes
[ 240.384044] INFO: task modprobe:91 blocked for more than 120 seconds.
[ 240.388009] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.388009] modprobe D df550168 0 91 1 0x00000000
[ 240.388009] c2b36ec0 00000286 c10ca12b df550168 c10fbea8 c145ee20 c145ee20 c10fbbbf
[ 240.388009] c2b3707c c32b8e20 00000000 8d12580e 00000007 c1005fb4 0000000b 00000000
[ 240.388009] c14a02e4 c2b3707c c14a02e4 00008b8b c14a02e4 c10066d3 c128e2f9 00000000
[ 240.388009] Call Trace:
[ 240.388009] [<c10ca12b>] ? iput+0x21/0x4a
[ 240.388009] [<c10fbea8>] ? sysfs_addrm_finish+0x46/0x199
[ 240.388009] [<c10fbbbf>] ? sysfs_add_one+0x11/0xb8
[ 240.388009] [<c1005fb4>] ? xen_force_evtchn_callback+0xc/0x10
[ 240.388009] 0.388009] [<c1041008efc>] ? sysca88009] ata_aux 00
[ 240.388009]0 c2a6c5fc df804600 df4027b8 c3312764 c10ca2d3 00000002 df402678
[ 240.388009] Call Trace:
[ 240.388009] [<c10ca2d3>] ? wait_on_inode+0x21/0x24
[ 240.388009] [<c128d8ef>] ? __mutex_lock_common+0xe8/0x13b
[ 240.388009] [<c128d951>] ? __mutex_lock_slowpath+0xf/0x11
[ 240.388009] [<c128d9e2>] ? mutex_lock+0x17/0x24
[ 240.388009] [<c128d9e2>] ? mutex_lock+0x17/0x24
[ 240.388009] [<c10da461>] ? revalidate_disk+0x34/0x53
[ 240.388009] [<e0962a9c>] ? sd_rescan+0x17/0x1e [sd_mod]
[ 240.388009] [<e083f8cf>] ? scsi_rescan_device+0x7f/0x94 [scsi_mod]
[ 240.388009] [<e08de42f>] ? ata_scsi_dev_rescan+0x50/0x94 [libata]
[ 240.388009] [<c10483b3>] ? worker_thread+0x141/0x1bd
[ 240.388009] [<e08de3df>] ? ata_scsi_dev_rescan+0x0/0x94 [libata]
[ 240.388009] [<c104b0ea>] ? autoremove_wake_function+0x0/0x2d
[ 240.388009] [<c1048272>] ? worker_thread+0x0/0x1bd
[ 240.388009] [<c104aeb8>] ? kthread+0x61/0x66
[ 240.388009] [<c104ae57>] ? kthread+0x0/0x66
[ 240.388009] [<c1009a67>] ? kernel_thread_helper+0x7/0x10
[ 240.388009] INFO: task modprobe:119 blocked for more than 120 seconds.
[ 240.388009] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.388009] modprobe D 40c124f6 0 119 1 0x00000000
[ 240.388009] df886640 00000286 00000000 40c124f6 00000000 c145ee20 c145ee20 c246a6c0
[ 240.388009] df8867fc c32b8e20 00000000 52140a60 00000001 e09664be 00000000 c10846e8
[ 240.388009] c128d9d6 df8867fc c128e201 c1290834 013d4850 c13d3ef8 c128e2f9 00000000
[ 240.388009] Call Trace:
[ 240.388009] [<c10846e8>] ? trace_module_notify+0x394/0x39e
[ 009] [<c128e2f9>009] [<c104fedf>] ? async_synchronize_full+0x10/0x29
[ 240.388009] [<c105e98d>] ? sys_init_module+0x15b/0x1d7
[ 240.388009] [<c1008efc>] ? syscall_call+0x7/0xb
[ 240.388009] INFO: task modprobe:123 blocked for more than 120 seconds.
[ 240.388009] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.388009] modprobe D fffffffe 0 123 1 0x00000000
[ 240.388009] c24d4440 00000286 dde02510 fffffffe c10fbbbf c145ee20 c145ee20 c2b4d9c0
[ 240.388009] c24d45fc c32b8e20 00000000 51d9293e 00000001 c1005fb4 0000000b 00000000
[ 240.388009] c14a02e4 c24d45fc c14a02e4 00008787 c14a02e4 c10066d3 c128e2f9 00000000
[ 240.388009] Call Trace:
[ 240.388009] [<c10fbbbf>] ? sysfs_add_one+0x11/0xb8
[ 240.388009] [<c1005fb4>] ? xen_force_evtchn_callback+0xc/0x10
[ 240.388009] [<c10066d3>] ? xen_restore_fl_direct_end+0x0/0x1
[ 240.388009] [<c128e2f9>] ? _spin_unlock_irqrestore+0xd/0xf
[ 240.388009] [<c104fe6f>] ? async_synchronize_cookie_domain+0xbb/0x111
[ 240.388009] [<c104b0ea>] ? autoremove_wake_function+0x0/0x2d
[ 240.388009] [<c104fedf>] ? async_synchronize_full+0x10/0x29
[ 240.388009] [<c105e98d>] ? sys_init_module+0x15b/0x1d7
[ 240.388009] [<c1008efc>] ? syscall_call+0x7/0xb
[ 241.916030] scsi 2:0:3:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 241.920010] scsi 2:0:3:0: Command already completed
[ 241.920010] scsi 2:0:3:0: Device offlined - not ready after error recovery
[ 252.820009] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 252.820009] ata3.00: failed command: READ DMA
[ 252.820009] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 252.820009] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 252.820009] ata3.00: status: { DRDY }
[ 252.820009] ata3: hard resetting link
[ 252.874950] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 252.874950] ata4.00: failed command: READ DMA
[ 252.874950] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 252.874950] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 252.874950] ata4.00: status: { DRDY }
[ 252.874950] ata4: hard resetting link
[ 253.336053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 253.380099] ata3.00: configured for UDMA/33
[ 253.384010] ata3.00: device reported invalid CHS sector 0
[ 253.390633] ata3: EH complete
[ 253.394008] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 253.440099] ata4.00: configured for UDMA/33
[ 253.444010] ata4.00: device reported invalid CHS sector 0
[ 253.450742] ata4: EH complete
[ 256.920033] scsi 11:0:3:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 256.924010] scsi 11:0:3:0: Command already completed
[ 256.924010] scsi 11:0:3:0: Device offlined - not ready after error recovery
[ 262.816035] scsi 2:0:4:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 262.820010] scsi 2:0:4:0: Command already completed
[ 272.832039] scsi 2:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 272.836010] scsi 2:0:4:0: Command already completed
[ 272.836010] scsi 2:0:4:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 272.836010] scsi2: Device reset code sleeping
[ 277.816036] scsi 11:0:4:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 277.820010] scsi 11:0:4:0: Command already completed
[ 277.864031] scsi2: Device reset timer expired (active 1)
[ 277.868010] scsi2: Device reset returning 0x2003
[ 277.868010] Recovery SCB completes
[ 283.820010] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 283.820010] ata3.00: failed command: READ DMA
[ 283.820010] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 283.820010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 283.820010] ata3.00: status: { DRDY }
[ 283.820010] ata3: hard resetting link
[ 283.874696] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 283.874696] ata4.00: failed command: READ DMA
[ 283.874696] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 283.874696] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 283.874696] ata4.00: status: { DRDY }
[ 283.874696] ata4: hard resetting link
[ 284.392054] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 284.398986] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 284.436366] ata4.00: configured for UDMA/33
[ 284.440010] ata4.00: device reported invalid CHS sector 0
[ 284.446876] ata4: EH complete
[ 284.456100] ata3.00: configured for UDMA/33
[ 284.460011] ata3.00: device reported invalid CHS sector 0
[ 284.466689] ata3: EH complete
[ 287.832030] scsi 11:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 287.836009] scsi 11:0:4:0: Command already completed
[ 287.836009] scsi 11:0:4:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 287.836009] scsi11: Device reset code sleeping
[ 292.864039] scsi11: Device reset timer expired (active 1)
[ 292.868009] scsi11: Device reset returning 0x2003
[ 292.868009] Recovery SCB completes
[ 297.868034] scsi 2:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 297.872010] scsi 2:0:4:0: Command already completed
[ 297.872010] scsi 2:0:4:0: Device offlined - not ready after error recovery
[ 312.868030] scsi 11:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 312.872010] scsi 11:0:4:0: Command already completed
[ 312.872010] scsi 11:0:4:0: Device offlined - not ready after error recovery
[ 315.004010] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 315.004010] ata4.00: failed command: READ DMA
[ 315.004010] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 315.004010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 315.004010] ata4.00: status: { DRDY }
[ 315.004010] ata4: hard resetting link
[ 315.058967] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 315.058967] ata3.00: failed command: READ DMA
[ 315.058967] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 315.058967] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 315.058967] ata3.00: status: { DRDY }
[ 315.058967] ata3: hard resetting link
[ 315.520051] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 315.564098] ata4.00: configured for UDMA/33
[ 315.568010] ata4.00: device reported invalid CHS.608006] ata3.00 320.576032] atlid CHS sector 028.412010] scsi 2:0:5:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 328.412010] scsi2: Device reset code sleeping
[ 333.436030] scsi2: Device reset timer expired (active 1)
[ 333.440009] scsi2: Device reset returning 0x2003
[ 333.440009] Recovery SCB completes
[ 334.000043] scsi 11:0:5:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 334.004010] scsi 11:0:5:0: Command already completed
[ 344.016029] scsi 11:0:5:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 344.020009] scsi 11:0:5:0: Command already completed
[ 344.020009] scsi 11:0:5:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 344.020009] scsi11: Device reset code sleeping
[ 346.004010] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 346.004010] ata4.00: failed command: READ DMA
[ 346.004010] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 346.004010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 346.004010] ata4.00: status: { DRDY }
[ 346.004010] ata4: hard resetting link
[ 346.528052] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 346.572097] ata4.00: configured for UDMA/33
[ 346.576011] ata4.00: device reported invalid CHS sector 0
[ 346.582652] ata4: EH complete
[ 349.048030] scsi11: Device reset timer expired (active 1)
[ 349.052009] scsi11: Device reset returning 0x2003
[ 349.052009] Recovery SCB completes
[ 352.004010] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 352.004010] ata3.00: failed command: READ DMA
[ 352.004010] ata3.00: cmd c8/00:08:00:00:00/00:00:00:g link
[ 352.528ta3: EH complete
[ 353.440031] scsi 2:0:5:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 353.444010] scsi 2:0:5:0: Command already completed
[ 353.444010] scsi 2:0:5:0: Device offlined - not ready after error recovery
[ 360.384039] INFO: task modprobe:91 blocked for more than 120 seconds.
[ 360.388010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.388010] modprobe D df550168 0 91 1 0x00000000
[ 360.388010] c2b36ec0 00000286 c10ca12b df550168 c10fbea8 c145ee20 c145ee20 c10fbbbf
[ 360.388010] c2b3707c c32b8e20 00000000 8d12580e 00000007 c1005fb4 0000000b 00000000
[ 360.388010] c14a02e4 c2b3707c c14a02e4 00008b8b c14a02e4 c10066d3 c128e2f9 00000000
[ 360.388010] Call Trace:
[ 360.388010] [<c10ca12b>] ? iput+0x21/0x4a
[ 360.388010] [<c10fbea8>] ? sysfs_addrm_finish+0x46/0x199
[ 360.388010] [<c10fbbbf>] ? sysfs_add_one+0x11/0xb8
[ 360.388010] [<c1005fb4>] ? xen_force_evtchn_callback+0xc/0x10
[ 360.388010] [<c10066d3>] ? xen_restore_fl_direct_end+0x0/0x1
[ 360.388010] [<c128e2f9>] ? _spin_unlock_irqrestore+0xd/0xf
[ 360.388010] [<c104fe6f>] ? async_synchronize_cookie_domain+0xbb/0x111
[ 360.388010] [<c104b0ea>] ? autoremove_wake_function+0x0/0x2d
[ 360.388010] [<c104fedf>] ? async_synchronize_full+0x10/0x29
[ 360.388010] [<c105e98d>] ? sys_init_module+0x15b/0x1d7
[ 360.388010] [<c1008efc>] ? syscall_call+0x7/0xb
[ 360.388010] INFO: task ata_aux:95 blocked for more than 120 seconds.
[ 360.388010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.388010] ata_aux D c24abefc 0 95 2 0x00000000
[ 360.388010] c2a6c440 00000246 00000005 c24abefc 00000000 c145ee20 c145ee20 00000000
[ 360.388010] c2a6c5fc c32b8e20 00000000 79f0e2cb 00000008 00000000 00000000 c2b5d800
[ 360.388010] 00000200 c2a6c5fc df804600 df4027b8 c3312764 c10ca2d3 00000002 df402678
[ 360.388010] Call Trace:
[ 360.388010] [<c10ca2d3>] ? wait_on_inode+0x21/0x24
[ 360.388010] [<c128d8ef>] ? __mutex_lock_common+0xe8/0x13b
[ 360.388010] [<c128d951>] ? __mutex_lock_slowpath+0xf/0x11
[ 360.388010] [<c128d9e2>] ? mutex_lock+0x17/0x24
[ 360.388010] [<c128d9e2>] ? mutex_lock+0x17/0x24
[ 360.388010] [<c10da461>] ? revalidate_disk+0x34/0x53
[ 360.388010] [<e0962a9c>] ? sd_rescan+0x17/0x1e [sd_mod]
[ 360.388010] [<e083f8cf>] ? scsi_rescan_device+0x7f/0x94 [scsi_mod]
[ 360.388010] [<e08de42f>] ? ata_scsi_dev_rescan+0x50/0x94 [libata]
[ 360.388010] [<c10483b3>] ? worker_thread+0x141/0x1bd
[ 360.388010] [<e08de3df>] ? ata_scsi_dev_rescan+0x0/0x94 [libata]
[ 360.388010] [<c104b0ea>] ? autoremove_wake_function+0x0/0x2d
[ 360.388010] [<c1048272>] ? worker_thread+0x0/0x1bd
[ 360.388010] [<c104aeb8>] ? kthread+0x61/0x66
[ 360.388010] [<c104ae57>] ? kthread+0x0/0x66
[ 360.388010] [<c1009a67>] ? kernel_thread_helper+0x7/0x10
[ 360.388010] INFO: task async/6:116 blocked for more than 120 seconds.
[ 360.388010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.388010] async/6 D b219ec32 0 116 2 0x00000000
[ 360.388010] c2b35980 00000246 0000002e b219ec32 0000002e c145ee20 c145ee20 c145a354
[ 360.388010] c2b35b3c c32b8e20 00000000 0000002e ae79d2c2 00000094 00000184 c13f9d80
[ 360.388010] 19d8b41a c2b35b3c ffff971d 00000000 19d8b41a 00000000 c2b70918 000061e2
[ 360.388010] Call Trace:
[ 360.388010] [<c128d242>] ? io_schedule+0x5f/0x98
[ 360.388010] [<c108e911>] ? sync_page+0x3a/0x3d
[ 360.388010] [<c128d6c9>] ? __wait_on_bit+0x33/0x58
[ 360.388010] [<c108e8d7>] ? sync_page+0x0/0x3d
[ 360.388010] [<c108eae2>] ? wait_on_page_bit+0x7f/0x88
[ 360.388010] [<c104b117>] ? wake_bit_function+0x0/0x3c
[ 360.388010] [<c108eb01>] ? wait_on_page_read+0x16/0x2d
[ 360.388010] [<c10f5c14>] ? read_dev_sector+0x26/0x60
[ 360.388010] [<c10f6880>] ? adfspart_check_ICS+0x20/0x14c
[ 360.388010] [<c128c8a4>] ? printk+0xe/0x12
[ 360.388010] [<c10f6650>] ? rescan_partitions+0x17e/0x378
[ 360.388010] [<c10f6860>] ? adfspart_check_ICS+0x0/0x14c
[ 360.388010] [<c113ebe4>] ? kobject_get+0xf/0x13
[ 360.388010] [<c10dac1b>] ? __blkdev_get+0x225/0x2c7
[ 360.388010] [<c10f5cfe>] ? register_disk+0xb0/0xfd
[ 360.388010] [<c1136a6f>] ? add_disk+0x9a/0xe8
[ 360.388010] [<c1136231>] ? exact_match+0x0/0x4
[ 360.388010] [<c11365e2>] ? exact_lock+0x0/0xd
[ 360.388010] [<e0964fb2>] ? sd_probe_async+0xfc/0x18d [sd_mod]
[ 360.388010] [<c104fcc1>] ? async_thread+0xe5/0x1d8
[ 360.388010] [<c10341cb>] ? default_wake_function+0x0/0x8
[ 360.388010] [<c104fbdc>] ? async_thread+0x0/0x1d8
[ 360.388010] [<c104aeb8>] ? kthread+0x61/0x66
[ 360.388010] [<c104ae57>] ? kthread+0x0/0x66
[ 360.388010] [<c1009a67>] ? kernel_thread_helper+0x7/0x10
[ 360.388010] INFO: task async/7:117 blocked for more than 120 seconds.
[ 360.388010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.388010] async/7 D ad1e94b0 0 117 2 0x00000000
[ 360.388010] c2b34cc0 00000246 0000002e ad1e94b0 0000002e c145ee20 c145ee20 c145a354
[ 360.388010] c2b34e7c c32b8e20 00000000 0000002e ae79d2c2 00000094 00000184 c13f9d80
[ 360.388010] 14dd5c98 c2b34e7c ffff9708 00000000 14dd5c98 00000000 c2b70968 000061de
[ 360.388010] Call Trace:
[ 360.388010] [<c128d242>] ? io_schedule+0x5f/0x98
[ 360.388010] [<c108e911>] ? sync_page+0x3a/0x3d
[ 360.388010] [<c128d6c9>] ? __wait_on_bit+0x33/0x58
[ 360.388010] [<c108e8d7>] ? sync_page+0x0/0x3d
[ 360.388010] [<c108eae2>] ? wait_on_page_bit+0x7f/0x88
[ 360.388010] [<c104b117>] ? wake_bit_function+0x0/0x3c
[ 360.388010] [<c108eb01>] ? wait_on_page_read+0x16/0x2d
[ 360.388010] [<c10f5c14>] ? read_dev_sector+0x26/0x60
[ 360.388010] [<c10f6880>] ? adfspart_check_ICS+0x20/0x14c
[ 360.388010] [<c128c8a4>] ? printk+0xe/0x12
[ 360.388010] [<c10f6650>] ? rescan_partitions+0x17e/0x378
[ 360.388010] [<c10f6860>] ? adfspart_check_ICS+0x0/0x14c
[ 360.388010] [<c113ebe4>] ? kobject_get+0xf/0x13
[ 360.388010] [<c10dac1b>] ? __blkdev_get+0x225/0x2c7
[ 360.388010] [<c10f5cfe>] ? register_disk+0xb0/0xfd
[ 360.388010] [<c1136a6f>] ? add_disk+0x9a/0xe8
[ 360.388010] [<c1136231>] ? exact_match+0x0/0x4
[ 360.388010] [<c11365e2>] ? exact_lock+0x0/0xd
[ 360.388010] [<e0964fb2>] ? sd_probe_async+0xfc/0x18d [sd_mod]
[ 360.388010] [<c104fcc1>] ? async_thread+0xe5/0x1d8
[ 360.388010] [<c10341cb>] ? default_wake_function+0x0/0x8
[ 360.388010] [<c104fbdc>] ? async_thread+0x0/0x1d8
[ 360.388010] [<c104aeb8>] ? kthread+0x61/0x66
[ 360.388010] [<c104ae57>] ? kthread+0x0/0x66
[ 360.388010] [<c1009a67>] ? kernel_thread_helper+0x7/0x10
[ 360.388010] INFO: task modprobe:119 blocked for more than 120 seconds.
[ 360.388010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.388010] modprobe D 40c124f6 0 119 1 0x00000000
[ 360.388010] df886640 00000286 00000000 40c124f6 00000000 c145ee20 c145ee20 c246a6c0
[ 360.388010] df8867fc c32b8e20 00000000 52140a60 00000001 e09664be 00000000 c10846e8
[ 360.388010] c128d9d6 df8867fc c128e201 c1290834 013d4850 c13d3ef8 c128e2f9 00000000
[ 360.388010] Call Trace:
[ 360.388010] [<c10846e_module_callback+ve_wake_function
[ 360.388010] In 120 seconds.
[000286 dde02510 fffffffe c10fbbbf c145ee20 c145ee20 c2b4d9c0
[ 360.388010] c24d45fc c32b8e20 00000000 51d9293e 00000001 c1005fb4 0000000b 00000000
[ 360.388010] c14a02e4 c24d45fc c14a02e4 00008787 c14a02e4 c10066d3 c128e2f9 00000000
[ 360.388010] Call Trace:
[ 360.388010] [<c10fbbbf>] ? sysfs_add_one+0x11/0xb8
[ 360.388010] [<c1005fb4>] ? xen_force_evtchn_callback+0xc/0x10
[ 360.388010] [<c10066d3>] ? xen_restore_fl_direct_end+0x0/0x1
[ 360.388010] [<c128e2f9>] ? _spin_unlock_irqrestore+0xd/0xf
[ 360.388010] [<c104fe6f>] ? async_synchronize_cookie_domain+0xbb/0x111
[ 360.388010] [<c104b0ea>] ? autoremove_wake_function+0x0/0x2d
[ 360.388010] [<c104fedf>] ? async_synchronize_full+0x10/0x29
[ 360.388010] [<c105e98d>] ? sys_init_module+0x15b/0x1d7
[ 360.388010] [<c1008efc>] ? syscall_call+0x7/0xb
[ 369.052030] scsi 11:0:5:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 369.056010] scsi 11:0:5:0: Command already completed
[ 369.056010] scsi 11:0:5:0: Device offlined - not ready after error recovery
[ 374.000036] scsi 2:0:6:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 374.004010] scsi 2:0:6:0: Command already completed

-- Package-specific info:
** Version:
Linux version 2.6.32-5-xen-686 (Debian 2.6.32-27) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Oct 31 02:38:31 UTC 2010

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-xen-686 root=/dev/mapper/quelea0-root ro console=tty0 console=ttyS0,115200n8

** Not tainted

** Kernel log:
[ 3.073378] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.076473] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.095287] ata4.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
[ 3.102310] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.132507] ata4.00: configured for UDMA/133
[ 3.137021] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 3.467213] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.792372] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.119125] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.447083] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.775039] ata9: SATA link down (SStatus 0 SControl 300)
[ 5.102996] ata10: SATA link down (SStatus 0 SControl 300)
[ 5.121569] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.121702] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.121804] sd 3:0:0:0: [sdb] Write Protect is off
[ 5.121808] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.121847] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.122077] sdb: sdb1 sdb2 sdb3 sdb4
[ 5.154946] sd 2:0:0:0: [sda] Write Protect is off
[ 5.155138] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 5.164473] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.164504] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.173784] sda: sda1 sda2 sda3 sda4
[ 5.187734] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.202558] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 5.208896] Uniform CD-ROM driver Revision: 3.20
[ 5.213793] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.220070] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 5.226118] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.231740] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 17.169398] scsi10 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 17.169400] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 17.169402] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
[ 17.190011] aic79xx 0000:03:02.1: PCI->APIC IRQ transform: INT B -> IRQ 29
[ 32.319397] scsi11 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 32.319399] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 32.319401] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
[ 32.468914] md: raid1 personality registered for level 1
[ 32.495058] md: md0 stopped.
[ 32.499399] md: bind<sdb1>
[ 32.502428] md: bind<sda1>
[ 32.506914] raid1: raid set md0 active with 2 out of 2 mirrors
[ 32.512840] md0: detected capacity change from 0 to 501612544
[ 32.520200] md0: unknown partition table
[ 32.536981] md: md1 stopped.
[ 32.541384] md: bind<sdb2>
[ 32.544500] md: bind<sda2>
[ 32.549187] raid1: raid set md1 active with 2 out of 2 mirrors
[ 32.555125] md1: detected capacity change from 0 to 1003356160
[ 32.562849] md1: unknown partition table
[ 32.692551] md: md2 stopped.
[ 32.696479] md: bind<sdb3>
[ 32.699484] md: bind<sda3>
[ 32.705657] raid1: raid set md2 active with 2 out of 2 mirrors
[ 32.711577] md2: detected capacity change from 0 to 29997465600
[ 32.720012] md2: unknown partition table
[ 32.739258] md: md3 stopped.
[ 32.745113] md: bind<sdb4>
[ 32.748121] md: bind<sda4>
[ 32.753506] raid1: raid set md3 active with 2 out of 2 mirrors
[ 32.759448] md3: detected capacity change from 0 to 968699346944
[ 32.767257] md3: unknown partition table
[ 32.777468] device-mapper: uevent: version 1.0.3
[ 32.782641] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 43.532470] alg: No test for xts(serpent) (xts(serpent-generic))
[ 44.294711] kjournald starting. Commit interval 5 seconds
[ 44.294729] EXT3-fs: mounted filesystem with ordered data mode.
[ 45.863655] udev[383]: starting version 163
[ 46.061212] EDAC MC: Ver: 2.1.0 Oct 31 2010
[ 46.063253] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 46.063669] i801_smbus 0000:00:1f.3: can't find IRQ for PCI INT B; probably buggy MP table
[ 46.071999] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 46.078896] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 46.125639] EDAC e7xxx: tolm = f8000, remapbase = 200000, remaplimit = 208000
[ 46.133015] EDAC MC0: Giving out device to 'e7xxx_edac' 'E7501': DEV 0000:00:00.0
[ 46.140782] EDAC PCI0: Giving out device to module 'e7xxx_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 46.195973] Intel 82802 RNG detected
[ 46.558698] Error: Driver 'pcspkr' is already registered, aborting...
[ 47.686885] EXT3 FS on dm-1, internal journal
[ 48.221293] Clocksource tsc unstable (delta = 70832644 ns)
[ 48.226983] Switching to clocksource jiffies
[ 52.604346] loop: module loaded
[ 54.100002] Adding 979832k swap on /dev/mapper/md1_crypt. Priority:-1 extents:1 across:979832k
[ 55.259543] kjournald starting. Commit interval 5 seconds
[ 55.311539] EXT3 FS on md0, internal journal
[ 55.315508] EXT3-fs: mounted filesystem with ordered data mode.
[ 55.375520] kjournald starting. Commit interval 5 seconds
[ 55.375667] EXT3 FS on dm-2, internal journal
[ 55.375667] EXT3-fs: mounted filesystem with ordered data mode.
[ 55.435516] kjournald starting. Commit interval 5 seconds
[ 55.435659] EXT3 FS on dm-3, internal journal
[ 55.435659] EXT3-fs: mounted filesystem with ordered data mode.
[ 56.560725] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 56.563869] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 56.576450] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 56.621084] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 56.627873] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 56.639472] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 66.763519] eth0: no IPv6 routers present
[ 67.235519] eth1: no IPv6 routers present

** Model information
not available

** Loaded modules:
Module Size Used by
loop 9761 0
evdev 5609 0
snd_pcm 47402 0
snd_timer 12258 1 snd_pcm
snd 34375 2 snd_pcm,snd_timer
soundcore 3450 1 snd
snd_page_alloc 5109 1 snd_pcm
intel_rng 1965 0
rng_core 2178 1 intel_rng
e7xxx_edac 2876 0
shpchp 21264 0
pci_hotplug 18065 1 shpchp
pcspkr 1207 0
i2c_i801 6466 0
edac_core 23121 3 e7xxx_edac
serio_raw 2916 0
i2c_core 12696 1 i2c_i801
ext3 94196 4
jbd 32161 1 ext3
mbcache 3762 1 ext3
serpent 16187 6
xts 1701 3
gf128mul 5106 1 xts
dm_crypt 9264 3
dm_mod 46086 18 dm_crypt
raid1 16363 4
md_mod 67325 5 raid1
sg 15972 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25865 10
crc_t10dif 1012 1 sd_mod
ata_generic 2047 0
uhci_hcd 16141 0
ehci_hcd 28255 0
sata_mv 19820 8
aic79xx 112740 0
ata_piix 17784 0
e1000 77809 0
scsi_transport_spi 14866 1 aic79xx
libata 116045 3 ata_generic,sata_mv,ata_piix
usbcore 98721 3 uhci_hcd,ehci_hcd
floppy 40931 0
nls_base 4541 1 usbcore
scsi_mod 101405 6 sg,sr_mod,sd_mod,aic79xx,scsi_transport_spi,libata

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 444756 3020 0 0 0 0 0 0 13445 176 0 0 0 0 0 0
eth1: 420 7 0 0 0 0 0 0 468 6 0 0 0 0 0 0

*** Protocol statistics:
Ip:
239 total packets received
10 with invalid addresses
0 forwarded
0 incoming packets discarded
229 incoming packets delivered
166 requests sent out
Icmp:
2 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo replies: 2
2 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
echo request: 2
IcmpMsg:
InType0: 2
OutType8: 2
Tcp:
7 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
213 segments received
150 segments send out
0 segments retransmited
0 bad segments received.
3 resets sent
Udp:
14 packets received
0 packets to unknown port received.
0 packet receive errors
14 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
174 packet headers predicted
13 acknowledgments not containing data payload received
IpExt:
InOctets: 274550
OutOctets: 10485

*** Device features:
eth0: 0x10ba9
eth1: 0x10ba9
lo: 0x13865

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation E7501 Memory Controller Hub [8086:254c] (rev 01)
Subsystem: Super Micro Computer Inc Device [15d9:3580]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGA
 
Old 11-23-2010, 12:23 PM
Ian Campbell
 
Default Bug#603927: linux-image-2.6.32-5-xen-686: booting with xen enabled fails to bring up ATA devices

Hi Micah,

I am assuming that this the same issue as you reported on xen-devel in
the "aic79xx failures with pvops dom0 2.6.32.25"[0] / "ATA driver
failures with pvops dom0"[1] thread recently?

If not please let me know otherwise I'll just monitor that thread,
although please let this ticket know if you reach a resolution on the
list.

Thanks,
Ian.

[0] http://lists.xensource.com/archives/html/xen-devel/2010-11/msg01228.html
[1] http://lists.xensource.com/archives/html/xen-devel/2010-11/msg01310.html

On Thu, 2010-11-18 at 10:23 -0500, Micah Anderson wrote:
> Package: linux-2.6
> Version: 2.6.32-27
> Severity: normal
>
> If I boot the linux-image-2.6.32-5-xen-686 kernel without Xen (ie. without the
> "multiboot /xen-4.0-i386.gz" option set in grub, things boot fine. If I add
> that line, the system fails to bring up the ATA devices properly, and it gets
> stuck in some crazy loop.
>
> The boot messages from the functioning kernel are attached below, the boot
> messages from when Xen is enabled are as follows (note: at some point I had
> to stop things):
>
> [ 0.000000] Reserving virtual address space above 0xf5800000
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-27) AuthenticAMD
> [ 00] Cyrix Cyriges of unused memory
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable)
> [ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved)
> [ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable)
> [ 0.000000] Xen: 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
> [ 0.000000] Xen: 00000000f7f80000 - 00000000f8000000 (reserved)
> [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] Xen: 00000000fec80000 - 00000000fec81000 (reserved)
> [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] Xen: 00000000ff800000 - 00000000ffc00000 (reserved)
> [ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved)
> [ 0.000000] DMI present.
> [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
> [ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x1000000
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
> [ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
> [ 0.000000] RAMDISK: 0164c000 - 02e0de00
> [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
> [ 0.000000] 0MB HIGHMEM available.
> [ 0.000000] 512MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 20000000
> [ 0.000000] low ram: 0 - 20000000
> [ 0.000000] node 0 low ram: 00000000 - 20000000
> [ 0.000000] node 0 bootmap 00010000 - 00014000
> [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 0020000000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> [ 0.000000] #1 [0002e8f000 - 0002eac000] XEN PAGETABLES ==> [0002e8f000 - 0002eac000]
> [ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
> [ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
> [ 0.000000] #4 [0001000000 - 00015268d4] TEXT DATA BSS ==> [0001000000 - 00015268d4]
> [ 0.000000] #5 [000164c000 - 0002e0de00] RAMDISK ==> [000164c000 - 0002e0de00]
> [ 0.000000] #6 [0002e0e000 - 0002e8f000] XEN START INFO ==> [0002e0e000 - 0002e8f000]
> [ 0.000000] #7 [0001527000 - 0001527114] BRK ==> [0001527000 - 0001527114]
> [ 0.000000] #8 [0000100000 - 00001e7000] PGTABLE ==> [0000100000 - 00001e7000]
> [ 0.000000] #9 [0000010000 - 0000014000] BOOTMAP ==> [0000010000 - 0000014000]
> [ 0.000000] found SMP MP-table at [c00f6ca0] f6ca0
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] Normal 0x00001000 -> 0x00020000
> [ 0.000000] HighMem 0x00020000 -> 0x00020000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009f
> [ 0.000000] 0: 0x00000100 -> 0x00020000
> [ 0.000000] Using APIC driver default
> [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
> [ 0.000000] Intel MultiProcessor Specification v1.4
> [ 0.000000] Virtual Wire compatibility mode.
> [ 0.000000] MPTABLE: OEM ID:
> [ 0.000000] MPTABLE: Product ID: Kings Canyon
> [ 0.000000] MPTABLE: APIC at: 0xFEE00000
> [ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000.
> [ 0.000000] I/O APIC #3 Version 32 at 0xFEC80000.
> [ 0.000000] I/O APIC #4 Version 32 at 0xFEC80400.
> [ 0.000000] Processors: 1
> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:d7ef9000)
> [ 0.000000] Booting paravirtualized kernel on Xen
> [ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
> [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 15 pages/cpu @c32b0000 s37656 r0 d23784 u65536
> [ 0.000000] pcpu-alloc: s37656 r0 d23784 u65536 alloc=16*4096
> [ 0.000000] pcpu-alloc: [0] 0
> [ 0.000000] Xen: using vcpu_info placement
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
> [ 0.000000] Kernel command line: placeholder root=/dev/mapper/quelea0-root ro console=tty0 console=ttyS0,115200n8
> [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
> [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] DMA: Placing 64MB software IO TLB between c3322000 - c7322000
> [ 0.000000] DMA: software IO TLB at phys 0x3322000 - 0x7322000
> [ 0.000000] xen_swiotlb_fixup: buf=c3322000 size=67108864
> [ 0.000000] xen_swiotlb_fixup: buf=c7382000 size=32768
> [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
> [ 0.000000] Memory: 421776k/524288k available (2631k kernel code, 101704k reserved, 1450k data, 396k init, 0k highmem)
> [ 0.000000] virtual kernel memory layout:
> [ 0.000000] fixmap : 0xf5556000 - 0xf57ff000 (2724 kB)
> [ 0.000000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
> [ 0.000000] vmalloc : 0xe0800000 - 0xf4ffe000 ( 327 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
> [ 0.000000] .init : 0xc13fd000 - 0xc1460000 ( 396 kB)
> [ 0.000000] .data : 0xc1291e51 - 0xc13fc998 (1450 kB)
> [ 0.000000] .text : 0xc1000000 - 0xc1291e51 (2631 kB)
> [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] NR_IRQS:1536
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] installing Xen timer for CPU 0
> [ 0.000000] Detected 3199.098 MHz processor.
> [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6398.19 BogoMIPS (lpj=12796392)
> [ 0.004000] Security Framework initialized
> [ 0.004000] SELinux: Disabled at boot.
> [ 0.004000] Mount-cache hash table entries: 512
> [ 0.004270] Initializing cgroup subsys ns
> [ 0.008000] Initializing cgroup subsys cpuacct
> [ 0.008000] Initializing cgroup subsys devices
> [ 0.008000] Initializing cgroup subsys freezer
> [ 0.008000] Initializing cgroup subsys net_cls
> [ 0.008037] CPU: Trace cache: 12K uops, L1 D cache: 8K
> [ 0.012000] CPU: L2 cache: 512K
> [ 0.012000] CPU: L3 cache: 1024K
> [ 0.012010] CPU: Unsupported number of siblings 2
> [ 0.016013] mce: CPU supports 4 MCE banks
> [ 0.020039] Performance Events: no PMU driver, software events only.
> [ 0.024949] SMP alternatives: switching to UP code
> [ 0.028001] Freeing SMP alternatives: 14k freed
> [ 0.028468] Brought up 1 CPUs
> [ 0.031772] devtmpfs: initialized
> [ 0.032844] Grant table initialized
> [ 0.036001] regulator: core version 0.5
> [ 0.036095] NET: Registered protocol family 16
> [ 0.042081] PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=4
> [ 0.044001] PCI: Using configuration type 1 for base access
> [ 0.044855] bio: create slab <bio-0> at 0
> [ 0.048134] ACPI: Interpreter disabled.
> [ 0.052141] xen_balloon: Initialising balloon driver with page order 0.
> [ 0.056065] vgaarb: loaded
> [ 0.058974] PCI: Probing PCI hardware
> [ 0.061236] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
> [ 0.064001] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
> [ 0.064644] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
> [ 0.068001] pci 0000:02:03.0: PME# disabled
> [ 0.068001] pci 0000:02:03.1: PME# supported from D0 D3hot D3cold
> [ 0.068001] pci 0000:02:03.1: PME# disabled
> [ 0.068001] pci 0000:00:1e.0: transparent bridge
> [ 0.068802] vgaarb: device added: PCI:0000:04:01.0,decodes=io+mem,owns=io+mem,locks= none
> [ 0.072213] PCI: Discovered primary peer bus 10 [IRQ]
> [ 0.076158] PCI: Discovered primary peer bus 11 [IRQ]
> [ 0.080001] PCI: Discovered primary peer bus 12 [IRQ]
> [ 0.080001] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2480]
> [ 0.080010] pci 0000:00:1f.1: found PCI INT A -> IRQ 7
> [ 0.084051] Switching to clocksource xen
> [ 0.090871] pnp: PnP ACPI: disabled
> [ 0.092001] PnPBIOS: Disabled
> [ 0.098142] pci 0000:01:1d.0: PCI bridge, secondary bus 0000:02
> [ 0.101452] pci 0000:01:1d.0: IO window: 0x3000-0x3fff
> [ 0.101452] pci 0000:01:1d.0: MEM window: 0xfc200000-0xfc7fffff
> [ 0.101452] pci 0000:01:1d.0: PREFETCH window: disabled
> [ 0.101452] pci 0000:01:1f.0: PCI bridge, secondary bus 0000:03
> [ 0.101452] pci 0000:01:1f.0: IO window: 0x4000-0x4fff
> [ 0.101452] pci 0000:01:1f.0: MEM window: 0xfc800000-0xfc8fffff
> [ 0.101452] pci 0000:01:1f.0: PREFETCH window: 0x20000000-0x200fffff
> [ 0.101452] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
> [ 0.101452] pci 0000:00:02.0: IO window: 0x3000-0x4fff
> [ 0.101452] pci 0000:00:02.0: MEM window: 0xfc100000-0xfc8fffff
> [ 0.101452] pci 0000:00:02.0: PREFETCH window: 0x20000000-0x200fffff
> [ 0fff
> [ 0.10145es)
> [ 0.206200ed (established 1ed
> [ 0.343095] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.344020] DMA: Placing 64MB software IO TLB between c3322000 - c7322000
> [ 0.344020] DMA: software IO TLB at phys 0x3322000 - 0x7322000
> [ 0.362585] platform rtc_cmos: registered platform RTC device (no PNP device found)
> [ 0.370987] audit: initializing netlink socket (disabled)
> [ 0.376498] type=2000 audit(1290053841.119:1): initialized
> [ 0.385030] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.393778] VFS: Disk quotas dquot_6.5.2
> [ 0.396007] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.404574] msgmni has been set to 872
> [ 0.408762] alg: No test for stdrng (krng)
> [ 0.413043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 0.416944] io scheduler noop registered
> [ 0.416944] io scheduler anticipatory registered
> [ 0.416944] io scheduler deadline registered
> [ 0.433670] io scheduler cfq registered (default)
> [ 0.438922] isapnp: Scanning for PnP cards...
> [ 0.800386] isapnp: No Plug & Play device found
> [ 0.813321] registering netback
> [ 0.819572] Linux agpgart interface v0.103
> [ 0.823976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.830529] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.834337] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 0.843200] PNP: No PS/2 controller found. Probing ports directly.
> [ 1.100406] serio: i8042 KBD port at 0x60,0x64 ires nvram
> [ 1.1otocol family 10
> [ 1.143058] lo: Disabled Privacy Extensions
> [ 1.147643] Mobile IPv6
> [ 1.150171] NET: Registered protocol family 17
> [ 1.154730] Using IPI No-Shortcut mode
> [ 1.158714] registered taskstats version 1
> [ 1.163623] rtc_cmos rtc_cmos: setting system clock to 2010-11-18 04:17:21 UTC (1290053841)
> [ 1.172121] Initalizing network drop monitor service
> [ 1.177224] Freeing unused kernel memory: 396k freed
> [ 1.183969] Write protecting the kernel text: 2632k
> [ 1.189426] Write protecting the kernel read-only data: 968k
> Loading, please wait...
> [ 1.248326] udev[48]: starting version 163
> [ 1.499041] usbcore: registered new interface driver usbfs
> [ 1.505529] usbcore: registered new interface driver hub
> [ 1.511815] usbcore: registered new device driver usb
> [ 1.523928] SCSI subsystem initialized
> [ 1.550684] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.569853] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
> [ 1.572012] Copyright (c) 1999-2006 Intel Corporation.
> [ 1.592728] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.611113] aic79xx 0000:03:02.0: found PCI INT A -> IRQ 5
> [ 1.612030] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:01.0
> [ 1.612030] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:03.0
> [ 1.612030] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:03.1
> [ 1.612030] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:03:02.1
> [ 1.757200] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
> [ 1.760007] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:04:01.0
> [ 1.760007] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 1.760007] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> [ 1.784562] e1000 0000:02:03.0: found PCI INT A -> IRQ 5
> [ 1.788461] e1000 0000:02:03.0: sharing IRQ 5 with 0000:02:01.0
> [ 1.788461] e1000 0000:02:03.0: sharing IRQ 5 with 0000:02:03.1
> [ 1.788461] e1000 0000:02:03.0: sharing IRQ 5 with 0000:03:02.0
> [ 1.788461] e1000 0000:02:03.0: sharing IRQ 5 with 0000:03:02.1
> [ 1.816751] uhci_hcd 0000:00:1d.0: request interrupt 11 failed
> [ 1.820544] uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
> [ 1.820544] uhci_hcd 0000:00:1d.0: init 0000:00:1d.0 fail, -38
> [ 1.820544] uhci_hcd: probe of 0000:00:1d.0 failed with error -38
> [ 1.842416] ata_piix 0000:00:1f.1: found PCI INT A -> IRQ 7
> [ 1.849013] scsi0 : ata_piix
> [ 1.852664] scsi1 : ata_piix
> [ 1.856158] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2060 irq 14
> [ 1.860011] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2068 irq 15
> [ 1.872469] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 1.876010] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 1
> [ 2.132556] e1000: 0000:02:03.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2d:3e:d2
> [ 2.142147] uhci_hcd 0000:00:1d.1: request interrupt 10 failed
> [ 2.145264] uhci_hcd 0000:00:1d.1: USB bus 1 deregistered
> [ 2.145264] uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -38
> [ 2.145264] uhci_hcd: probe of 0000:00:1d.1 failed with error -38
> [ 2.167751] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 2.171687] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 1
> [ 2.181803] uhci_hcd 0000:00:1d.2: irq 7, io base 0x00002040
> [ 2.188158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
> [ 2.192089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.192089] usb usb1: Product: UHCI Host Controller
> [ 2.192089] usb usb1: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
> [ 2.192089] usb usb1: SerialNumber: 0000:00:1d.2
> [ 2.228762] usb usb1: configuration #1 chosen from 1 choice
> [ 2.235130] hub 1-0:1.0: USB hub found
> [ 2.239350] hub 1-0:1.0: 2 ports detected
> [ 2.266301] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> [ 2.274127] sata_mv 0000:02:01.0: version 1.28
> [ 2.277900] sata_mv 0000:02:01.0: found PCI INT A -> IRQ 5
> [ 2.277900] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:02:03.0
> [ 2.277900] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:02:03.1
> [ 2.277900] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:03:02.0
> [ 2.277900] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:03:02.1
> [ 2.313432] sata_mv 0000:02:01.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
> [ 2.321949] ata2.00: ATAPI: CD-224E, 1.9A, max UDMA/33
> [ 2.332447] scsi3 : sata_mv
> [ 2.336027] scsi4 : sata_mv
> [ 2.339456] scsi5 : sata_mv
> [ 2.342818] ata2.00: configured for UDMA/33
> [ 2.354302] scsi6 : sata_mv
> [ 2.357747] scsi 1:0:0:0: CD-ROM TEAC CD-224E 1.9A PQ: 0 ANSI: 5
> [ 2.371535] scsi7 : sata_mv
> [ 2.382529] scsi8 : sata_mv
> [ 2.391689] scsi9 : sata_mv
> [ 2.399346] scsi10 : sata_mv
> [ 2.402872] ata3: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc222000 irq 5
> [ 2.406609] ata4: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc224000 irq 5
> [ 2.406609] ata5: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc226000 irq 5
> [ 2.406609] ata6: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc228000 irq 5
> [ 2.406609] ata7: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc232000 irq 5
> [ 2.406609] ata8: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc234000 irq 5
> [ 2.406609] ata9: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc236000 irq 5
> [ 2.406609] ata10: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc238000 irq 5
> [ 2.471695] e1000 0000:02:03.1: found PCI INT B -> IRQ 5
> [ 2.473886] e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:01.0
> [ 2.473886] e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:03.0
> [ 2.473886] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.0
> [ 2.473886] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.1
> [ 2.508785] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
> [ 2.512737] Uniform CD-ROM driver Revision: 3.20
> [ 2.767020] e1000: 0000:02:03.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2d:3e:d3
> [ 2.803144] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
> [ 3.040059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 3.060081] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA39C, max UDMA/133
> [ 3.064011] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 3.096102] ata3.00: configured for UDMA/133
> [ 3.101030] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
> [ 3.584052] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 3.604081] ata4.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
> [ 3.608010] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 3.640103] ata4.00: configured for UDMA/133
> [ 3.645002] scsi 4:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
> [ 3.972054] ata5: SATA link down (SStatus 0 SControl 300)
> [ 4.296054] ata6: SATA link down (SStatus 0 SControl 300)
> [ 4.620054] ata7: SATA link down (SStatus 0 SControl 300)
> [ 4.944054] ata8: SATA link down (SStatus 0 SControl 300)
> [ 5.268054] ata9: SATA link down (SStatus 0 SControl 300)
> [ 5.592049] ata10: SATA link down (SStatus 0 SControl 300)
> [ 5.635029] sr 1:0:0:0: Attached scsi generic sg0 type 5
> [ 5.641712] scsi 3:0:0:0: Attached scsi generic sg1 type 0
> [ 5.650067] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 5.659103] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 5.668170] sd 4:0:0:0: Attached scsi generic sg2 type 0
> [ 5.674538] sd 4:0:0:0: [sdb] Write Protect is off
> [ 5ache: enabled, rltra320 SCSI ada 0000:03:02.1: sharing IRQ 5 with 0000:02:01.0
> [ 17.258477] aic79xx 002.408044] scsi11 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
> [ 32.408047] <Adaptec AIC7902 Ultra320 SCSI adapter>
> [ 32.408049] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
> [ 35.820011] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
> [ 35.820011] ata3.00: failed command: READ FPDMA QUEUED
> [ 35.820011] ata3.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> [ 35.820011] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 35.820011] ata3.00: status: { DRDY }
> [ 35.820011] ata3: hard resetting link
> [ 35.876030] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
> [ 35.876030] ata4.00: failed command: READ FPDMA QUEUED
> [ 35.876030] ata4.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> [ 35.876030] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 35.876030] ata4.00: status: { DRDY }
> [ 35.876030] ata4: hard resetting link
> [ 36.340053] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 36.384104] ata3.00: configured for UDMA/133
> [ 36.388011] ata3.00: device reported invalid CHS sector 0
> [ 36.394842] ata3: EH complete
> [ 36.398238] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 36.444106] ata4.00: configured for UDMA/133
> [ 36.448011] ata4.00: device reported invalid CHS sector 0
> [ 36.454822] ata4: EH complete
> [ 38.816054] scsi 2:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 38.820011] scsi 2:0:0:0: Command already completed
> [ 48.832048] scsi 2:0:0:0: Attempting0x12 0x0 0x0 0x0 Command already completed
> [ 53.860036] scsi2: Device reset timer expired (active 1)
> [ 53.864010] scsi2: Device reset returning 0x2003
> [ 53.864010] Recovery SCB completes
> [ 63.832044] scsi 11:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 63.836010] scsi 11:0:0:0: Command already completed
> [ 63.836010] scsi 11:0:0:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 63.836010] scsi11: Device reset code sleeping
> [ 66.820009] ata3.00: NCQ disabled due to excessive errors
> [ 66.820009] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
> [ 66.820009] ata3.00: failed command: READ FPDMA QUEUED
> [ 66.820009] ata3.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> [ 66.820009] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 66.820009] ata3.00: status: { DRDY }
> [ 66.820009] ata3: hard resetting link
> [ 66.881899] ata4.00: NCQ disabled due to excessive errors
> [ 66.881899] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
> [ 66.881899] ata4.00: failed command: READ FPDMA QUEUED
> [ 66.881899] ata4.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> [ 66.881899] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 66.881899] ata4.00: status: { DRDY }
> [ 66.881899] ata4: hard resetting link
> [ 67.344052] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 67.388105] ata3.00: configured for UDMA/133
> [ 67.392010] ata3.00: device reported invalid CHS sector 0
> [ 67.398791] ata3: EH complete
> [ 67.408053] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 67.452101] ata4.00: configured for UDMA/133
> [ 67.456010] ata4.00: device reported invalid CHS sector 0
> [ 67.462824] ata4: EH complete
> [ 68.864038] scsi11: Device reset timer expired (active 1)
> [ 68.868010] scsi11: Device reset returning 0x2003
> [ 68.868010] Recovery SCB completes
> [ 73.864031] scsi 2:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 73.868010] scsi 2:0:0:0: Command already completed
> [ 73.868010] scsi 2:0:0:0: Device offlined - not ready after error recovery
> [ 88.868038] scsi 11:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 88.872011] scsi 11:0:0:0: Command already completed
> [ 88.872011] scsi 11:0:0:0: Device offlined - not ready after error recovery
> [ 94.816051] scsi 2:0:1:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 94.820010] scsi 2:0:1:0: Command already completed
> [ 97.820010] ata3: limiting SATA link speed to 1.5 Gbps
> [ 97.820010] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 97.820010] ata3.00: failed command: READ DMA
> [ 97.820010] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 97.820010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 97.820010] ata3.00: status: { DRDY }
> [ 97.820010] ata3: hard resetting link
> [ 97.880736] ata4: limiting SATA link speed to 1.5 Gbps
> [ 97.880736] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 97.880736] ata4.00: failed command: READ DMA
> [ 97.880736] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 97.880736] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 97.880736] ata4.00: status: { DRDY }
> [ 97.880736] ata4: hard resetting link
> [ 98.344052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 98.388101] ata3.00: configured for UDMA/133
> [ 98.392010] ata3.00: device reported invalid CHS sector 0
> [ 98.398778] ata3: EH complete
> [ 98.404055] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 98.448105] ata4.00: configured for UDMA/133
> [ 98.452010] ata4.00: device reported invalid CHS sector 0
> [ 98.458821] ata4: EH complete
> [ 104.832048] scsi 2:0:1:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 104.836009] scsi 2:0:1:0: Command already completed
> [ 104.836009] scsi 2:0:1:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 104.836009] scsi2: Device reset code sleeping
> [ 109.816050] scsi 11:0:1:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 109.820009] scsi 11:0:1:0: Command already completed
> [ 109.864037] scsi2: Device reset timer expired (active 1)
> [ 109.868009] scsi2: Device reset returning 0x2003
> [ 109.868009] Recovery SCB completes
> [ 119.832030] scsi 11:0:1:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 119.836010] scsi 11:0:1:0: Command already completed
> [ 119.836010] scsi 11:0:1:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 119.836010] scsi11: Device reset code sleeping
> [ 124.864037] scsi11: Device reset timer expired (active 1)
> [ 124.868010] scsi11: Device reset returning 0x2003
> [ 124.868010] Recovery SCB completes
> [ 128.820009] ata3.00: limiting speed to UDMA/100:PIO4
> [ 128.820009] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 128.820009] ata3.00: failed command: READ DMA
> [ 128.820009] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 128.820009] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 128.820009] ata3.00: status: { DRDY }
> [ 128.820009] ata3: hard resetting link
> [ 128.880543] ata4.00: limiting speed to UDMA/100:PIO4
> [ 128.880543] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 128.880543] ata4.00: failed command: READ DMA
> [ 128.880543] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 128.880543] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 128.880543] ata4.00: status: { DRDY }
> [ 128.880543] ata4: hard resetting link
> [ 129.344052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 129.388100] ata3.00: configured for UDMA/100
> [ 129.392009] ata3.00: device reported invalid CHS sector 0
> [ 129.398821] ata3: EH complete
> [ 129.412059] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 129.456102] ata4.00: configured for UDMA/100
> [ 129.460010] ata4.00: device reported invalid CHS sector 0
> [ 129.466822] ata4: EH complete
> [ 129.868035] scsi 2:0:1:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 129.872009] scsi 2:0:1:0: Command already completed
> [ 129.872009] scsi 2:0:1:0: Device offlined - not ready after error recovery
> [ 144.868037] scsi 11:0:1:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 144.872010] scsi 11:0:1:0: Command already completed
> [ 144.872010] scsi 11:0:1:0: Device offlined - not ready after error recovery
> [ 150.816048] scsi 2:0:2:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 150.820010] scsi 2:0:2:0: Command already completed
> [ 159.820009] ata3.00: limiting speed to UDMA/33:PIO4
> [ 159.82 dma 4096 in
> [ 1limiting speed t0:00/00:00:00:00nk
> [ 160.404059] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 160.410953] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 160.448373] ata4.00: configured for UDMA/33
> [ 160.452010] ata4.00: device reported invalid CHS sector 0
> [ 160.459004] ata4: EH complete
> [ 160.468105] ata3.00: configured for UDMA/33
> [ 160.472010] ata3.00: device reported invalid CHS sector 0
> [ 160.478695] ata3: EH complete
> [ 160.832049] scsi 2:0:2:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 160.836010] scsi 2:0:2:0: Command already completed
> [ 160.836010] scsi 2:0:2:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 160.836010] scsi2: Device reset code sleeping
> [ 165.816040] scsi 11:0:2:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 165.820009] scsi 11:0:2:0: Command already completed
> [ 165.864038] scsi2: Device reset timer expired (active 1)
> [ 165.868010] scsi2: Device reset returning 0x2003
> [ 165.868010] Recovery SCB completes
> [ 175.832049] scsi 11:0:2:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 175.836010] scsi 11:0:2:0: Command already completed
> [ 175.836010] scsi 11:0:2:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 175.836010] scsi11: Device reset code sleeping
> [ 180.864037] scsi11: Device reset timer expired (active 1)
> [ 180.868010] scsi11: Device reset returning 0x2003
> [ 180.868010] Recovery SCB completes
>
> udevadm settle - timeout of 180 seconds reached, the event queue contains:
> /sys/devices/pci0000.0/0000:02:01.0/h.0/0000:01:1d.0/0000:02:01.0/host3/target3:0:0/3:0:0:0/bsg/3:0:0:0 (541)
> /sys/devices/pci0000:00/0000:00:02.0/0000:01:1d.0/0000:02:01.0/host3/target3:0:0/3:0:0:0/scsi_generic/sg1 (550)
> /sys/devices/pci0000:00/0000:00:02.0/0000:01:1d.0/0000:02:01.0/host3/target3:0:0/3:0:0:0/scsi_disk/3:0:0:0 (554)
> /sys/devices/pci0000:00/0000:00:02.0/0000:01:1f.0/0000:03:02.1/host11 (560)
> /sys/devices/pci0000:00/0000:00:02.0/0000:01:1f.0/0000:03:02.1/host11/scsi_host/host11 (561)
> /sys/devices/pci0000:00/0000:00:02.0/0000:01:1f.0/0000:03:02.1/host11/spi_host/host11 (562)
> udevd[48]: worker [57] unexpectedly returned with status 0x0100
>
> udevd[48]: worker [57] failed while handling '/devices/pci0000:00/0000:00:02.0/0000:01:1f.0/0000:03:02.1'
>
> udevd[48]: worker [58] unexpectedly returned with status 0x0100
>
> udevd[48]: worker [58] failed while handling '/devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0/scsi_device/1:0:0:0'
>
> udevd[48]: worker [51] unexpectedly returned with status 0x0100
>
> udevd[48]: worker [51] failed while handling '/devices/pci0000:00/0000:00:02.0/0000:01:1d.0/0000:02:01.0/host3/target3:0:0/3:0:0:0'
>
> [ 185.868036] scsi 2:0:2:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 185.872011] scsi 2:0:2:0: Command already completed
> [ 185.872011] scsi 2:0:2:0: Device offlined - not ready after error recovery
> [ 190.820010] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 190.820010] ata4.00: failed command: READ DMA
> [ 190.820010] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 190.820010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 190.820010] ata4.00: status: { DRDY }
> [ 190.820010] ata4: hard resetting link
> [ 190.876250] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 190.876250] ata3.00: failed command: READ DMA
> [ 190.876250] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 190.876250] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 190.876250] ata3.00: status: { DRDY }
> [ 190.876250] ata3: hard resetting link
> [ 191.392055] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 191.399001] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 191.436366] ata3.00: configured for UDMA/33
> [ 191.440010] ata3.00: device reported invalid CHS sector 0
> [ 191.440010] sd 3:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 191.440010] sd 3:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
> [ 191.440010] Descriptor sense data with sense descriptors (in hex):
> [ 191.440010] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
> [ 191.440010] 00 00 00 00
> [ 191.440010] sd 3:0:0:0: [sda] Add. Sense: No additional sense information
> [ 191.440010] sd 3:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
> [ 191.440010] end_request: I/O error, dev sda, sector 0
> [ 191.440010] Buffer I/O error on device sda, logical block 0
> [ 191.440010] ata3: EH complete
> [ 191.520102] ata4.00: configured for UDMA/33
> [ 191.524011] ata4.00: device reported invalid CHS sector 0
> [ 191.524011] sd 4:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 191.524011] sd 4:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
> [ 191.524011] Descriptor sense data with sense descriptors (in hex):
> [ 191.524011] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
> [ 191.524011] 00 00 00 00
> [ 191.524011] sd 4:0:0:0: [sdb] Add. Sense: No additional sense information
> [ 191.524011] sd 4:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
> [ 191.524011] end_request: I/O error, dev sdb, sector 0
> [ 191.524011] Buffer I/O error on device sdb, logical block 0
> [ 191.524011] ata4: EH complete
> [ 200.924033] scsi 11:0:2:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 200.928009] scsi 11:0:2:0: Command already completed
> [ 200.928009] scsi 11:0:2:0: Device offlined - not ready after error recovery
> [ 206.816034] scsi 2:0:3:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 206.820009] scsi 2:0:3:0: Command already completed
> [ 216.832030] scsi 2:0:3:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 216.836009] scsi 2:0:3:0: Command already completed
> [ 216.836009] scsi 2:0:3:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 216.836009] scsi2: Device reset code sleeping
> [ 221.820010] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 221.820010] ata3.00: failed command: READ DMA
> [ 221.820010] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 221.820010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 221.820010] ata3.00: status: { DRDY }
> [ 221.820010] ata3: hard resetting link
> [ 221.870863] scsi 11:0:3:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 221.874840] scsi 11:0:3:0: Command already completed
> [ 221.887981] scsi2: Device reset timer expired (active 1)
> [ 221.891952] scsi2: Device reset returning 0x2003
> [ 221.891952] Recovery SCB completes
> [ 221.914105] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 221.914105] ata4.00: failed command: READ DMA
> [ 221.914105] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 221.914105] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 221.914105] ata4.00: status: { DRDY }
> [ 221.914105] ata4: hard resetting link
> [ 222.376054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 222.420098] ata3.00: configured for UDMA/33
> [ 222.424010] ata3.00: device reported invalid CHS sector 0
> [ 222.430739] ata3: EH complete
> [ 222.434122] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 222.480098] ata4.00: configured for UDMA/33
> [ 222.484010] ata4.00: device reported invalid CHS sector 0
> [ 222.490631] ata4: EH complete
> [ 231.884033] scsi 11:0:3:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 231.888010] scsi 11:0:3:0: Command already completed
> [ 231.888010] scsi 11:0:3:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 231.888010] scsi11: Device reset code sleeping
> [ 236.916031] scsi11: Device reset timer expired (active 1)
> [ 236.920010] scsi11: Device reset returning 0x2003
> [ 236.920010] Recovery SCB completes
> [ 240.384044] INFO: task modprobe:91 blocked for more than 120 seconds.
> [ 240.388009] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 240.388009] modprobe D df550168 0 91 1 0x00000000
> [ 240.388009] c2b36ec0 00000286 c10ca12b df550168 c10fbea8 c145ee20 c145ee20 c10fbbbf
> [ 240.388009] c2b3707c c32b8e20 00000000 8d12580e 00000007 c1005fb4 0000000b 00000000
> [ 240.388009] c14a02e4 c2b3707c c14a02e4 00008b8b c14a02e4 c10066d3 c128e2f9 00000000
> [ 240.388009] Call Trace:
> [ 240.388009] [<c10ca12b>] ? iput+0x21/0x4a
> [ 240.388009] [<c10fbea8>] ? sysfs_addrm_finish+0x46/0x199
> [ 240.388009] [<c10fbbbf>] ? sysfs_add_one+0x11/0xb8
> [ 240.388009] [<c1005fb4>] ? xen_force_evtchn_callback+0xc/0x10
> [ 240.388009] 0.388009] [<c1041008efc>] ? sysca88009] ata_aux 00
> [ 240.388009]0 c2a6c5fc df804600 df4027b8 c3312764 c10ca2d3 00000002 df402678
> [ 240.388009] Call Trace:
> [ 240.388009] [<c10ca2d3>] ? wait_on_inode+0x21/0x24
> [ 240.388009] [<c128d8ef>] ? __mutex_lock_common+0xe8/0x13b
> [ 240.388009] [<c128d951>] ? __mutex_lock_slowpath+0xf/0x11
> [ 240.388009] [<c128d9e2>] ? mutex_lock+0x17/0x24
> [ 240.388009] [<c128d9e2>] ? mutex_lock+0x17/0x24
> [ 240.388009] [<c10da461>] ? revalidate_disk+0x34/0x53
> [ 240.388009] [<e0962a9c>] ? sd_rescan+0x17/0x1e [sd_mod]
> [ 240.388009] [<e083f8cf>] ? scsi_rescan_device+0x7f/0x94 [scsi_mod]
> [ 240.388009] [<e08de42f>] ? ata_scsi_dev_rescan+0x50/0x94 [libata]
> [ 240.388009] [<c10483b3>] ? worker_thread+0x141/0x1bd
> [ 240.388009] [<e08de3df>] ? ata_scsi_dev_rescan+0x0/0x94 [libata]
> [ 240.388009] [<c104b0ea>] ? autoremove_wake_function+0x0/0x2d
> [ 240.388009] [<c1048272>] ? worker_thread+0x0/0x1bd
> [ 240.388009] [<c104aeb8>] ? kthread+0x61/0x66
> [ 240.388009] [<c104ae57>] ? kthread+0x0/0x66
> [ 240.388009] [<c1009a67>] ? kernel_thread_helper+0x7/0x10
> [ 240.388009] INFO: task modprobe:119 blocked for more than 120 seconds.
> [ 240.388009] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 240.388009] modprobe D 40c124f6 0 119 1 0x00000000
> [ 240.388009] df886640 00000286 00000000 40c124f6 00000000 c145ee20 c145ee20 c246a6c0
> [ 240.388009] df8867fc c32b8e20 00000000 52140a60 00000001 e09664be 00000000 c10846e8
> [ 240.388009] c128d9d6 df8867fc c128e201 c1290834 013d4850 c13d3ef8 c128e2f9 00000000
> [ 240.388009] Call Trace:
> [ 240.388009] [<c10846e8>] ? trace_module_notify+0x394/0x39e
> [ 009] [<c128e2f9>009] [<c104fedf>] ? async_synchronize_full+0x10/0x29
> [ 240.388009] [<c105e98d>] ? sys_init_module+0x15b/0x1d7
> [ 240.388009] [<c1008efc>] ? syscall_call+0x7/0xb
> [ 240.388009] INFO: task modprobe:123 blocked for more than 120 seconds.
> [ 240.388009] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 240.388009] modprobe D fffffffe 0 123 1 0x00000000
> [ 240.388009] c24d4440 00000286 dde02510 fffffffe c10fbbbf c145ee20 c145ee20 c2b4d9c0
> [ 240.388009] c24d45fc c32b8e20 00000000 51d9293e 00000001 c1005fb4 0000000b 00000000
> [ 240.388009] c14a02e4 c24d45fc c14a02e4 00008787 c14a02e4 c10066d3 c128e2f9 00000000
> [ 240.388009] Call Trace:
> [ 240.388009] [<c10fbbbf>] ? sysfs_add_one+0x11/0xb8
> [ 240.388009] [<c1005fb4>] ? xen_force_evtchn_callback+0xc/0x10
> [ 240.388009] [<c10066d3>] ? xen_restore_fl_direct_end+0x0/0x1
> [ 240.388009] [<c128e2f9>] ? _spin_unlock_irqrestore+0xd/0xf
> [ 240.388009] [<c104fe6f>] ? async_synchronize_cookie_domain+0xbb/0x111
> [ 240.388009] [<c104b0ea>] ? autoremove_wake_function+0x0/0x2d
> [ 240.388009] [<c104fedf>] ? async_synchronize_full+0x10/0x29
> [ 240.388009] [<c105e98d>] ? sys_init_module+0x15b/0x1d7
> [ 240.388009] [<c1008efc>] ? syscall_call+0x7/0xb
> [ 241.916030] scsi 2:0:3:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 241.920010] scsi 2:0:3:0: Command already completed
> [ 241.920010] scsi 2:0:3:0: Device offlined - not ready after error recovery
> [ 252.820009] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 252.820009] ata3.00: failed command: READ DMA
> [ 252.820009] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 252.820009] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 252.820009] ata3.00: status: { DRDY }
> [ 252.820009] ata3: hard resetting link
> [ 252.874950] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 252.874950] ata4.00: failed command: READ DMA
> [ 252.874950] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 252.874950] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 252.874950] ata4.00: status: { DRDY }
> [ 252.874950] ata4: hard resetting link
> [ 253.336053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 253.380099] ata3.00: configured for UDMA/33
> [ 253.384010] ata3.00: device reported invalid CHS sector 0
> [ 253.390633] ata3: EH complete
> [ 253.394008] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 253.440099] ata4.00: configured for UDMA/33
> [ 253.444010] ata4.00: device reported invalid CHS sector 0
> [ 253.450742] ata4: EH complete
> [ 256.920033] scsi 11:0:3:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 256.924010] scsi 11:0:3:0: Command already completed
> [ 256.924010] scsi 11:0:3:0: Device offlined - not ready after error recovery
> [ 262.816035] scsi 2:0:4:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 262.820010] scsi 2:0:4:0: Command already completed
> [ 272.832039] scsi 2:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 272.836010] scsi 2:0:4:0: Command already completed
> [ 272.836010] scsi 2:0:4:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 272.836010] scsi2: Device reset code sleeping
> [ 277.816036] scsi 11:0:4:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 277.820010] scsi 11:0:4:0: Command already completed
> [ 277.864031] scsi2: Device reset timer expired (active 1)
> [ 277.868010] scsi2: Device reset returning 0x2003
> [ 277.868010] Recovery SCB completes
> [ 283.820010] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 283.820010] ata3.00: failed command: READ DMA
> [ 283.820010] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 283.820010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 283.820010] ata3.00: status: { DRDY }
> [ 283.820010] ata3: hard resetting link
> [ 283.874696] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 283.874696] ata4.00: failed command: READ DMA
> [ 283.874696] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 283.874696] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 283.874696] ata4.00: status: { DRDY }
> [ 283.874696] ata4: hard resetting link
> [ 284.392054] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 284.398986] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 284.436366] ata4.00: configured for UDMA/33
> [ 284.440010] ata4.00: device reported invalid CHS sector 0
> [ 284.446876] ata4: EH complete
> [ 284.456100] ata3.00: configured for UDMA/33
> [ 284.460011] ata3.00: device reported invalid CHS sector 0
> [ 284.466689] ata3: EH complete
> [ 287.832030] scsi 11:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 287.836009] scsi 11:0:4:0: Command already completed
> [ 287.836009] scsi 11:0:4:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 287.836009] scsi11: Device reset code sleeping
> [ 292.864039] scsi11: Device reset timer expired (active 1)
> [ 292.868009] scsi11: Device reset returning 0x2003
> [ 292.868009] Recovery SCB completes
> [ 297.868034] scsi 2:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 297.872010] scsi 2:0:4:0: Command already completed
> [ 297.872010] scsi 2:0:4:0: Device offlined - not ready after error recovery
> [ 312.868030] scsi 11:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 312.872010] scsi 11:0:4:0: Command already completed
> [ 312.872010] scsi 11:0:4:0: Device offlined - not ready after error recovery
> [ 315.004010] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 315.004010] ata4.00: failed command: READ DMA
> [ 315.004010] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 315.004010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 315.004010] ata4.00: status: { DRDY }
> [ 315.004010] ata4: hard resetting link
> [ 315.058967] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 315.058967] ata3.00: failed command: READ DMA
> [ 315.058967] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 315.058967] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 315.058967] ata3.00: status: { DRDY }
> [ 315.058967] ata3: hard resetting link
> [ 315.520051] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 315.564098] ata4.00: configured for UDMA/33
> [ 315.568010] ata4.00: device reported invalid CHS.608006] ata3.00 320.576032] atlid CHS sector 028.412010] scsi 2:0:5:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 328.412010] scsi2: Device reset code sleeping
> [ 333.436030] scsi2: Device reset timer expired (active 1)
> [ 333.440009] scsi2: Device reset returning 0x2003
> [ 333.440009] Recovery SCB completes
> [ 334.000043] scsi 11:0:5:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 334.004010] scsi 11:0:5:0: Command already completed
> [ 344.016029] scsi 11:0:5:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 344.020009] scsi 11:0:5:0: Command already completed
> [ 344.020009] scsi 11:0:5:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 344.020009] scsi11: Device reset code sleeping
> [ 346.004010] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 346.004010] ata4.00: failed command: READ DMA
> [ 346.004010] ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 346.004010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 346.004010] ata4.00: status: { DRDY }
> [ 346.004010] ata4: hard resetting link
> [ 346.528052] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 346.572097] ata4.00: configured for UDMA/33
> [ 346.576011] ata4.00: device reported invalid CHS sector 0
> [ 346.582652] ata4: EH complete
> [ 349.048030] scsi11: Device reset timer expired (active 1)
> [ 349.052009] scsi11: Device reset returning 0x2003
> [ 349.052009] Recovery SCB completes
> [ 352.004010] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 352.004010] ata3.00: failed command: READ DMA
> [ 352.004010] ata3.00: cmd c8/00:08:00:00:00/00:00:00:g link
> [ 352.528ta3: EH complete
> [ 353.440031] scsi 2:0:5:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 353.444010] scsi 2:0:5:0: Command already completed
> [ 353.444010] scsi 2:0:5:0: Device offlined - not ready after error recovery
> [ 360.384039] INFO: task modprobe:91 blocked for more than 120 seconds.
> [ 360.388010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 360.388010] modprobe D df550168 0 91 1 0x00000000
> [ 360.388010] c2b36ec0 00000286 c10ca12b df550168 c10fbea8 c145ee20 c145ee20 c10fbbbf
> [ 360.388010] c2b3707c c32b8e20 00000000 8d12580e 00000007 c1005fb4 0000000b 00000000
> [ 360.388010] c14a02e4 c2b3707c c14a02e4 00008b8b c14a02e4 c10066d3 c128e2f9 00000000
> [ 360.388010] Call Trace:
> [ 360.388010] [<c10ca12b>] ? iput+0x21/0x4a
> [ 360.388010] [<c10fbea8>] ? sysfs_addrm_finish+0x46/0x199
> [ 360.388010] [<c10fbbbf>] ? sysfs_add_one+0x11/0xb8
> [ 360.388010] [<c1005fb4>] ? xen_force_evtchn_callback+0xc/0x10
> [ 360.388010] [<c10066d3>] ? xen_restore_fl_direct_end+0x0/0x1
> [ 360.388010] [<c128e2f9>] ? _spin_unlock_irqrestore+0xd/0xf
> [ 360.388010] [<c104fe6f>] ? async_synchronize_cookie_domain+0xbb/0x111
> [ 360.388010] [<c104b0ea>] ? autoremove_wake_function+0x0/0x2d
> [ 360.388010] [<c104fedf>] ? async_synchronize_full+0x10/0x29
> [ 360.388010] [<c105e98d>] ? sys_init_module+0x15b/0x1d7
> [ 360.388010] [<c1008efc>] ? syscall_call+0x7/0xb
> [ 360.388010] INFO: task ata_aux:95 blocked for more than 120 seconds.
> [ 360.388010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 360.388010] ata_aux D c24abefc 0 95 2 0x00000000
> [ 360.388010] c2a6c440 00000246 00000005 c24abefc 00000000 c145ee20 c145ee20 00000000
> [ 360.388010] c2a6c5fc c32b8e20 00000000 79f0e2cb 00000008 00000000 00000000 c2b5d800
> [ 360.388010] 00000200 c2a6c5fc df804600 df4027b8 c3312764 c10ca2d3 00000002 df402678
> [ 360.388010] Call Trace:
> [ 360.388010] [<c10ca2d3>] ? wait_on_inode+0x21/0x24
> [ 360.388010] [<c128d8ef>] ? __mutex_lock_common+0xe8/0x13b
> [ 360.388010] [<c128d951>] ? __mutex_lock_slowpath+0xf/0x11
> [ 360.388010] [<c128d9e2>] ? mutex_lock+0x17/0x24
> [ 360.388010] [<c128d9e2>] ? mutex_lock+0x17/0x24
> [ 360.388010] [<c10da461>] ? revalidate_disk+0x34/0x53
> [ 360.388010] [<e0962a9c>] ? sd_rescan+0x17/0x1e [sd_mod]
> [ 360.388010] [<e083f8cf>] ? scsi_rescan_device+0x7f/0x94 [scsi_mod]
> [ 360.388010] [<e08de42f>] ? ata_scsi_dev_rescan+0x50/0x94 [libata]
> [ 360.388010] [<c10483b3>] ? worker_thread+0x141/0x1bd
> [ 360.388010] [<e08de3df>] ? ata_scsi_dev_rescan+0x0/0x94 [libata]
> [ 360.388010] [<c104b0ea>] ? autoremove_wake_function+0x0/0x2d
> [ 360.388010] [<c1048272>] ? worker_thread+0x0/0x1bd
> [ 360.388010] [<c104aeb8>] ? kthread+0x61/0x66
> [ 360.388010] [<c104ae57>] ? kthread+0x0/0x66
> [ 360.388010] [<c1009a67>] ? kernel_thread_helper+0x7/0x10
> [ 360.388010] INFO: task async/6:116 blocked for more than 120 seconds.
> [ 360.388010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 360.388010] async/6 D b219ec32 0 116 2 0x00000000
> [ 360.388010] c2b35980 00000246 0000002e b219ec32 0000002e c145ee20 c145ee20 c145a354
> [ 360.388010] c2b35b3c c32b8e20 00000000 0000002e ae79d2c2 00000094 00000184 c13f9d80
> [ 360.388010] 19d8b41a c2b35b3c ffff971d 00000000 19d8b41a 00000000 c2b70918 000061e2
> [ 360.388010] Call Trace:
> [ 360.388010] [<c128d242>] ? io_schedule+0x5f/0x98
> [ 360.388010] [<c108e911>] ? sync_page+0x3a/0x3d
> [ 360.388010] [<c128d6c9>] ? __wait_on_bit+0x33/0x58
> [ 360.388010] [<c108e8d7>] ? sync_page+0x0/0x3d
> [ 360.388010] [<c108eae2>] ? wait_on_page_bit+0x7f/0x88
> [ 360.388010] [<c104b117>] ? wake_bit_function+0x0/0x3c
> [ 360.388010] [<c108eb01>] ? wait_on_page_read+0x16/0x2d
> [ 360.388010] [<c10f5c14>] ? read_dev_sector+0x26/0x60
> [ 360.388010] [<c10f6880>] ? adfspart_check_ICS+0x20/0x14c
> [ 360.388010] [<c128c8a4>] ? printk+0xe/0x12
> [ 360.388010] [<c10f6650>] ? rescan_partitions+0x17e/0x378
> [ 360.388010] [<c10f6860>] ? adfspart_check_ICS+0x0/0x14c
> [ 360.388010] [<c113ebe4>] ? kobject_get+0xf/0x13
> [ 360.388010] [<c10dac1b>] ? __blkdev_get+0x225/0x2c7
> [ 360.388010] [<c10f5cfe>] ? register_disk+0xb0/0xfd
> [ 360.388010] [<c1136a6f>] ? add_disk+0x9a/0xe8
> [ 360.388010] [<c1136231>] ? exact_match+0x0/0x4
> [ 360.388010] [<c11365e2>] ? exact_lock+0x0/0xd
> [ 360.388010] [<e0964fb2>] ? sd_probe_async+0xfc/0x18d [sd_mod]
> [ 360.388010] [<c104fcc1>] ? async_thread+0xe5/0x1d8
> [ 360.388010] [<c10341cb>] ? default_wake_function+0x0/0x8
> [ 360.388010] [<c104fbdc>] ? async_thread+0x0/0x1d8
> [ 360.388010] [<c104aeb8>] ? kthread+0x61/0x66
> [ 360.388010] [<c104ae57>] ? kthread+0x0/0x66
> [ 360.388010] [<c1009a67>] ? kernel_thread_helper+0x7/0x10
> [ 360.388010] INFO: task async/7:117 blocked for more than 120 seconds.
> [ 360.388010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 360.388010] async/7 D ad1e94b0 0 117 2 0x00000000
> [ 360.388010] c2b34cc0 00000246 0000002e ad1e94b0 0000002e c145ee20 c145ee20 c145a354
> [ 360.388010] c2b34e7c c32b8e20 00000000 0000002e ae79d2c2 00000094 00000184 c13f9d80
> [ 360.388010] 14dd5c98 c2b34e7c ffff9708 00000000 14dd5c98 00000000 c2b70968 000061de
> [ 360.388010] Call Trace:
> [ 360.388010] [<c128d242>] ? io_schedule+0x5f/0x98
> [ 360.388010] [<c108e911>] ? sync_page+0x3a/0x3d
> [ 360.388010] [<c128d6c9>] ? __wait_on_bit+0x33/0x58
> [ 360.388010] [<c108e8d7>] ? sync_page+0x0/0x3d
> [ 360.388010] [<c108eae2>] ? wait_on_page_bit+0x7f/0x88
> [ 360.388010] [<c104b117>] ? wake_bit_function+0x0/0x3c
> [ 360.388010] [<c108eb01>] ? wait_on_page_read+0x16/0x2d
> [ 360.388010] [<c10f5c14>] ? read_dev_sector+0x26/0x60
> [ 360.388010] [<c10f6880>] ? adfspart_check_ICS+0x20/0x14c
> [ 360.388010] [<c128c8a4>] ? printk+0xe/0x12
> [ 360.388010] [<c10f6650>] ? rescan_partitions+0x17e/0x378
> [ 360.388010] [<c10f6860>] ? adfspart_check_ICS+0x0/0x14c
> [ 360.388010] [<c113ebe4>] ? kobject_get+0xf/0x13
> [ 360.388010] [<c10dac1b>] ? __blkdev_get+0x225/0x2c7
> [ 360.388010] [<c10f5cfe>] ? register_disk+0xb0/0xfd
> [ 360.388010] [<c1136a6f>] ? add_disk+0x9a/0xe8
> [ 360.388010] [<c1136231>] ? exact_match+0x0/0x4
> [ 360.388010] [<c11365e2>] ? exact_lock+0x0/0xd
> [ 360.388010] [<e0964fb2>] ? sd_probe_async+0xfc/0x18d [sd_mod]
> [ 360.388010] [<c104fcc1>] ? async_thread+0xe5/0x1d8
> [ 360.388010] [<c10341cb>] ? default_wake_function+0x0/0x8
> [ 360.388010] [<c104fbdc>] ? async_thread+0x0/0x1d8
> [ 360.388010] [<c104aeb8>] ? kthread+0x61/0x66
> [ 360.388010] [<c104ae57>] ? kthread+0x0/0x66
> [ 360.388010] [<c1009a67>] ? kernel_thread_helper+0x7/0x10
> [ 360.388010] INFO: task modprobe:119 blocked for more than 120 seconds.
> [ 360.388010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 360.388010] modprobe D 40c124f6 0 119 1 0x00000000
> [ 360.388010] df886640 00000286 00000000 40c124f6 00000000 c145ee20 c145ee20 c246a6c0
> [ 360.388010] df8867fc c32b8e20 00000000 52140a60 00000001 e09664be 00000000 c10846e8
> [ 360.388010] c128d9d6 df8867fc c128e201 c1290834 013d4850 c13d3ef8 c128e2f9 00000000
> [ 360.388010] Call Trace:
> [ 360.388010] [<c10846e_module_callback+ve_wake_function
> [ 360.388010] In 120 seconds.
> [000286 dde02510 fffffffe c10fbbbf c145ee20 c145ee20 c2b4d9c0
> [ 360.388010] c24d45fc c32b8e20 00000000 51d9293e 00000001 c1005fb4 0000000b 00000000
> [ 360.388010] c14a02e4 c24d45fc c14a02e4 00008787 c14a02e4 c10066d3 c128e2f9 00000000
> [ 360.388010] Call Trace:
> [ 360.388010] [<c10fbbbf>] ? sysfs_add_one+0x11/0xb8
> [ 360.388010] [<c1005fb4>] ? xen_force_evtchn_callback+0xc/0x10
> [ 360.388010] [<c10066d3>] ? xen_restore_fl_direct_end+0x0/0x1
> [ 360.388010] [<c128e2f9>] ? _spin_unlock_irqrestore+0xd/0xf
> [ 360.388010] [<c104fe6f>] ? async_synchronize_cookie_domain+0xbb/0x111
> [ 360.388010] [<c104b0ea>] ? autoremove_wake_function+0x0/0x2d
> [ 360.388010] [<c104fedf>] ? async_synchronize_full+0x10/0x29
> [ 360.388010] [<c105e98d>] ? sys_init_module+0x15b/0x1d7
> [ 360.388010] [<c1008efc>] ? syscall_call+0x7/0xb
> [ 369.052030] scsi 11:0:5:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
> [ 369.056010] scsi 11:0:5:0: Command already completed
> [ 369.056010] scsi 11:0:5:0: Device offlined - not ready after error recovery
> [ 374.000036] scsi 2:0:6:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
> [ 374.004010] scsi 2:0:6:0: Command already completed
>
> -- Package-specific info:
> ** Version:
> Linux version 2.6.32-5-xen-686 (Debian 2.6.32-27) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Oct 31 02:38:31 UTC 2010
>
> ** Command line:
> BOOT_IMAGE=/vmlinuz-2.6.32-5-xen-686 root=/dev/mapper/quelea0-root ro console=tty0 console=ttyS0,115200n8
>
> ** Not tainted
>
> ** Kernel log:
> [ 3.073378] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
> [ 3.076473] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 3.095287] ata4.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
> [ 3.102310] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 3.132507] ata4.00: configured for UDMA/133
> [ 3.137021] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
> [ 3.467213] ata5: SATA link down (SStatus 0 SControl 300)
> [ 3.792372] ata6: SATA link down (SStatus 0 SControl 300)
> [ 4.119125] ata7: SATA link down (SStatus 0 SControl 300)
> [ 4.447083] ata8: SATA link down (SStatus 0 SControl 300)
> [ 4.775039] ata9: SATA link down (SStatus 0 SControl 300)
> [ 5.102996] ata10: SATA link down (SStatus 0 SControl 300)
> [ 5.121569] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 5.121702] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 5.121804] sd 3:0:0:0: [sdb] Write Protect is off
> [ 5.121808] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 5.121847] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5.122077] sdb: sdb1 sdb2 sdb3 sdb4
> [ 5.154946] sd 2:0:0:0: [sda] Write Protect is off
> [ 5.155138] sd 3:0:0:0: [sdb] Attached SCSI disk
> [ 5.164473] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.164504] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5.173784] sda: sda1 sda2 sda3 sda4
> [ 5.187734] sd 2:0:0:0: [sda] Attached SCSI disk
> [ 5.202558] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
> [ 5.208896] Uniform CD-ROM driver Revision: 3.20
> [ 5.213793] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 5.220070] sr 1:0:0:0: Attached scsi generic sg0 type 5
> [ 5.226118] sd 2:0:0:0: Attached scsi generic sg1 type 0
> [ 5.231740] sd 3:0:0:0: Attached scsi generic sg2 type 0
> [ 17.169398] scsi10 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
> [ 17.169400] <Adaptec AIC7902 Ultra320 SCSI adapter>
> [ 17.169402] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
> [ 17.190011] aic79xx 0000:03:02.1: PCI->APIC IRQ transform: INT B -> IRQ 29
> [ 32.319397] scsi11 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
> [ 32.319399] <Adaptec AIC7902 Ultra320 SCSI adapter>
> [ 32.319401] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
> [ 32.468914] md: raid1 personality registered for level 1
> [ 32.495058] md: md0 stopped.
> [ 32.499399] md: bind<sdb1>
> [ 32.502428] md: bind<sda1>
> [ 32.506914] raid1: raid set md0 active with 2 out of 2 mirrors
> [ 32.512840] md0: detected capacity change from 0 to 501612544
> [ 32.520200] md0: unknown partition table
> [ 32.536981] md: md1 stopped.
> [ 32.541384] md: bind<sdb2>
> [ 32.544500] md: bind<sda2>
> [ 32.549187] raid1: raid set md1 active with 2 out of 2 mirrors
> [ 32.555125] md1: detected capacity change from 0 to 1003356160
> [ 32.562849] md1: unknown partition table
> [ 32.692551] md: md2 stopped.
> [ 32.696479] md: bind<sdb3>
> [ 32.699484] md: bind<sda3>
> [ 32.705657] raid1: raid set md2 active with 2 out of 2 mirrors
> [ 32.711577] md2: detected capacity change from 0 to 29997465600
> [ 32.720012] md2: unknown partition table
> [ 32.739258] md: md3 stopped.
> [ 32.745113] md: bind<sdb4>
> [ 32.748121] md: bind<sda4>
> [ 32.753506] raid1: raid set md3 active with 2 out of 2 mirrors
> [ 32.759448] md3: detected capacity change from 0 to 968699346944
> [ 32.767257] md3: unknown partition table
> [ 32.777468] device-mapper: uevent: version 1.0.3
> [ 32.782641] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
> [ 43.532470] alg: No test for xts(serpent) (xts(serpent-generic))
> [ 44.294711] kjournald starting. Commit interval 5 seconds
> [ 44.294729] EXT3-fs: mounted filesystem with ordered data mode.
> [ 45.863655] udev[383]: starting version 163
> [ 46.061212] EDAC MC: Ver: 2.1.0 Oct 31 2010
> [ 46.063253] input: PC Speaker as /devices/platform/pcspkr/input/input0
> [ 46.063669] i801_smbus 0000:00:1f.3: can't find IRQ for PCI INT B; probably buggy MP table
> [ 46.071999] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 46.078896] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 46.125639] EDAC e7xxx: tolm = f8000, remapbase = 200000, remaplimit = 208000
> [ 46.133015] EDAC MC0: Giving out device to 'e7xxx_edac' 'E7501': DEV 0000:00:00.0
> [ 46.140782] EDAC PCI0: Giving out device to module 'e7xxx_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
> [ 46.195973] Intel 82802 RNG detected
> [ 46.558698] Error: Driver 'pcspkr' is already registered, aborting...
> [ 47.686885] EXT3 FS on dm-1, internal journal
> [ 48.221293] Clocksource tsc unstable (delta = 70832644 ns)
> [ 48.226983] Switching to clocksource jiffies
> [ 52.604346] loop: module loaded
> [ 54.100002] Adding 979832k swap on /dev/mapper/md1_crypt. Priority:-1 extents:1 across:979832k
> [ 55.259543] kjournald starting. Commit interval 5 seconds
> [ 55.311539] EXT3 FS on md0, internal journal
> [ 55.315508] EXT3-fs: mounted filesystem with ordered data mode.
> [ 55.375520] kjournald starting. Commit interval 5 seconds
> [ 55.375667] EXT3 FS on dm-2, internal journal
> [ 55.375667] EXT3-fs: mounted filesystem with ordered data mode.
> [ 55.435516] kjournald starting. Commit interval 5 seconds
> [ 55.435659] EXT3 FS on dm-3, internal journal
> [ 55.435659] EXT3-fs: mounted filesystem with ordered data mode.
> [ 56.560725] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 56.563869] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
> [ 56.576450] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> [ 56.621084] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 56.627873] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
> [ 56.639472] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 66.763519] eth0: no IPv6 routers present
> [ 67.235519] eth1: no IPv6 routers present
>
> ** Model information
> not available
>
> ** Loaded modules:
> Module Size Used by
> loop 9761 0
> evdev 5609 0
> snd_pcm 47402 0
> snd_timer 12258 1 snd_pcm
> snd 34375 2 snd_pcm,snd_timer
> soundcore 3450 1 snd
> snd_page_alloc 5109 1 snd_pcm
> intel_rng 1965 0
> rng_core 2178 1 intel_rng
> e7xxx_edac 2876 0
> shpchp 21264 0
> pci_hotplug 18065 1 shpchp
> pcspkr 1207 0
> i2c_i801 6466 0
> edac_core 23121 3 e7xxx_edac
> serio_raw 2916 0
> i2c_core 12696 1 i2c_i801
> ext3 94196 4
> jbd 32161 1 ext3
> mbcache 3762 1 ext3
> serpent 16187 6
> xts 1701 3
> gf128mul 5106 1 xts
> dm_crypt 9264 3
> dm_mod 46086 18 dm_crypt
> raid1 16363 4
> md_mod 67325 5 raid1
> sg 15972 0
> sr_mod
 
Old 11-23-2010, 02:15 PM
micah anderson
 
Default Bug#603927: linux-image-2.6.32-5-xen-686: booting with xen enabled fails to bring up ATA devices

Hi Ian,

On Tue, 23 Nov 2010 13:23:41 +0000, Ian Campbell <ijc@hellion.org.uk> wrote:
> I am assuming that this the same issue as you reported on xen-devel in
> the "aic79xx failures with pvops dom0 2.6.32.25"[0] / "ATA driver
> failures with pvops dom0"[1] thread recently?

Indeed, I got some purchase with upstream Xen folks, and decided to keep
discussing it there. I had meant to update this bug report once I had
gotten something useful.

> If not please let me know otherwise I'll just monitor that thread,
> although please let this ticket know if you reach a resolution on the
> list.

Sounds good, thanks for checking in!

micah
 

Thread Tools




All times are GMT. The time now is 07:21 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org