FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 11-15-2010, 11:52 AM
"Timo Z."
 
Default Bug#603563: linux-image-2.6.36-trunk-686-bigmem: Enable the CONFIG_PM_ADVANCED_DEBUG option

Package: linux-2.6
Version: 2.6.36-1~experimental.1
Severity: wishlist
Tags: experimental

Hi there,

when I start powertop, after a while I get this message:

Suggestion: Enable the CONFIG_PM_ADVANCED_DEBUG kernel configuration option.
This option will allow PowerTOP to collect runtime power management statistics.

I'd like to ask, if it would be possible to enable this option in the next
kernel release?

Thanks a lot in advance!

All the best!

Timo



-- Package-specific info:
** Version:
Linux version 2.6.36-trunk-686-bigmem (Debian 2.6.36-1~experimental.1) (max@stro.at) (gcc version 4.4.5 20100902 (prerelease) (Debian 4.4.4-13) ) #1 SMP Thu Oct 28 14:50:48 UTC 2010

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.36-trunk-686-bigmem root=/dev/mapper/debian-root ro quiet

** Tainted: P (1)
* Proprietary module has been loaded.

** Kernel log:
[ 53.358846] [fglrx] Gart cacheable size:497 M.
[ 53.358851] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 53.358853] [fglrx] Reserved FB block: Unshared offset:fc11000, size:3ef000
[ 53.358856] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[ 58.418339] tg3 0000:08:00.0: irq 45 for MSI/MSI-X
[ 58.532555] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 65.042673] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 65.792564] tg3 0000:08:00.0: irq 45 for MSI/MSI-X
[ 65.894529] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 66.178494] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 71.672939] wlan0: authenticate with 00:15:0c:de:fb:de (try 1)
[ 71.675228] wlan0: authenticated
[ 71.675278] wlan0: associate with 00:15:0c:de:fb:de (try 1)
[ 71.678747] wlan0: RX AssocResp from 00:15:0c:de:fb:de (capab=0x411 status=0 aid=2)
[ 71.678754] wlan0: associated
[ 71.686808] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 82.352018] wlan0: no IPv6 routers present
[ 151.955989] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 335.453958] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 666.296093] usb 3-1: USB disconnect, address 2
[ 666.296097] usb 3-1.1: USB disconnect, address 3
[ 666.340257] usb 3-1.2: USB disconnect, address 4
[ 4421.122756] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 5505.328814] mmc0: new high speed SDHC card at address aaaa
[ 5505.392839] mmcblk0: mmc0:aaaa SD08G 7.40 GiB
[ 5505.394554] mmcblk0: p1
[ 5511.412373] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 5573.904213] mmc0: card aaaa removed
[ 5573.908483] mmcblk0: error -123 sending status comand
[ 5573.908492] mmcblk0: error -123 sending read/write command, response 0x0, card status 0x0
[ 5573.920551] mmcblk0: error -123 requesting status
[ 5573.922558] end_request: I/O error, dev mmcblk0, sector 8193
[ 5573.922562] Buffer I/O error on device mmcblk0p1, logical block 1
[ 5573.922564] lost page write due to I/O error on mmcblk0p1
[ 5573.926631] mmcblk0: error -123 sending status comand
[ 5573.926635] mmcblk0: error -123 sending read/write command, response 0x0, card status 0x0
[ 5573.938743] mmcblk0: error -123 requesting status
[ 5573.940794] end_request: I/O error, dev mmcblk0, sector 17287
[ 5573.940799] Buffer I/O error on device mmcblk0p1, logical block 9095
[ 5573.940801] lost page write due to I/O error on mmcblk0p1
[ 5573.940809] end_request: I/O error, dev mmcblk0, sector 17288
[ 5573.940812] Buffer I/O error on device mmcblk0p1, logical block 9096
[ 5573.940814] lost page write due to I/O error on mmcblk0p1
[ 5573.940816] end_request: I/O error, dev mmcblk0, sector 17289
[ 5573.940818] Buffer I/O error on device mmcblk0p1, logical block 9097
[ 5573.940820] lost page write due to I/O error on mmcblk0p1
[ 5573.940822] end_request: I/O error, dev mmcblk0, sector 17290
[ 5573.940824] Buffer I/O error on device mmcblk0p1, logical block 9098
[ 5573.940826] lost page write due to I/O error on mmcblk0p1
[ 6711.720066] CE: hpet increased min_delta_ns to 7500 nsec
[ 7230.987187] /build/buildd-linux-2.6_2.6.36-1~experimental.1-i386-PYc776/linux-2.6-2.6.36/debian/build/source_i386_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-2.3.4/input0, status -71
[ 7231.002839] /build/buildd-linux-2.6_2.6.36-1~experimental.1-i386-PYc776/linux-2.6-2.6.36/debian/build/source_i386_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-2.3.4/input0, status -71
[ 7231.019623] /build/buildd-linux-2.6_2.6.36-1~experimental.1-i386-PYc776/linux-2.6-2.6.36/debian/build/source_i386_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-2.3.4/input0, status -71
[ 7231.034794] /build/buildd-linux-2.6_2.6.36-1~experimental.1-i386-PYc776/linux-2.6-2.6.36/debian/build/source_i386_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-2.3.4/input0, status -71
[ 7231.050785] /build/buildd-linux-2.6_2.6.36-1~experimental.1-i386-PYc776/linux-2.6-2.6.36/debian/build/source_i386_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-2.3.4/input0, status -71
[ 7231.054262] hub 2-2.3:1.0: port 4 disabled by hub (EMI?), re-enabling...
[ 7231.054520] usb 2-2.3.4: USB disconnect, address 5
[ 7231.276555] usb 2-2.3.4: new low speed USB device using ehci_hcd and address 6
[ 7231.374253] usb 2-2.3.4: New USB device found, idVendor=046d, idProduct=c01e
[ 7231.374263] usb 2-2.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7231.374270] usb 2-2.3.4: Product: USB-PS/2 Optical Mouse
[ 7231.374276] usb 2-2.3.4: Manufacturer: Logitech
[ 7231.379525] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.3/2-2.3.4/2-2.3.4:1.0/input/input20
[ 7231.379776] generic-usb 0003:046D:C01E.0006: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-2.3.4/input0
[ 7233.611823] /build/buildd-linux-2.6_2.6.36-1~experimental.1-i386-PYc776/linux-2.6-2.6.36/debian/build/source_i386_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-2.3.4/input0, status -71
[ 7233.614405] hub 2-2.3:1.0: port 4 disabled by hub (EMI?), re-enabling...
[ 7233.614778] usb 2-2.3.4: USB disconnect, address 6
[ 7233.836441] usb 2-2.3.4: new low speed USB device using ehci_hcd and address 7
[ 7233.934369] usb 2-2.3.4: New USB device found, idVendor=046d, idProduct=c01e
[ 7233.934380] usb 2-2.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7233.934386] usb 2-2.3.4: Product: USB-PS/2 Optical Mouse
[ 7233.934392] usb 2-2.3.4: Manufacturer: Logitech
[ 7233.939372] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.3/2-2.3.4/2-2.3.4:1.0/input/input21
[ 7233.939621] generic-usb 0003:046D:C01E.0007: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-2.3.4/input0
[12688.855893] unopkg.bin[14577]: segfault at 8 ip b72adf80 sp b171a240 error 4 in libuno_cppu.so.3[b728c000+2b000]
[12798.691026] reportbug[15133]: segfault at aaaaaaae ip b6694aac sp b6071330 error 4 in libpango-1.0.so.0.2800.3[b6673000+42000]
[12899.908063] usb 2-3: new high speed USB device using ehci_hcd and address 8
[12900.042547] usb 2-3: New USB device found, idVendor=067b, idProduct=3507
[12900.042552] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12900.042555] usb 2-3: Product: Mass Storage Device
[12900.042558] usb 2-3: Manufacturer: Prolific Technology Inc.
[12900.042560] usb 2-3: SerialNumber: 0
[12900.451208] Initializing USB Mass Storage driver...
[12900.451305] usb-storage 2-3:1.0: Quirks match for vid 067b pid 3507: 110
[12900.451335] scsi6 : usb-storage 2-3:1.0
[12900.451437] usbcore: registered new interface driver usb-storage
[12900.451439] USB Mass Storage support registered.
[12901.453609] scsi 6:0:0:0: Direct-Access WDC WD20 00JB-00GVA0 08.0 PQ: 0 ANSI: 0
[12901.454568] sd 6:0:0:0: Attached scsi generic sg2 type 0
[12901.455046] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 390721968
[12901.455053] sd 6:0:0:0: [sdb] 390721967 512-byte logical blocks: (200 GB/186 GiB)
[12901.455900] sd 6:0:0:0: [sdb] Write Protect is off
[12901.455904] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[12901.455908] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[12901.456897] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 390721968
[12901.458028] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[12901.481307] sdb: sdb1 sdb2 sdb3
[12901.482395] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 390721968
[12901.483273] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[12901.483277] sd 6:0:0:0: [sdb] Attached SCSI disk

** Model information
not available

** Loaded modules:
Module Size Used by
usb_storage 30119 0
nls_utf8 920 0
nls_cp437 4501 0
vfat 6508 0
fat 34934 1 vfat
mmc_block 7223 0
ip6table_filter 928 0
ip6_tables 8693 1 ip6table_filter
iptable_filter 964 0
ip_tables 7810 1 iptable_filter
x_tables 9273 4 ip6table_filter,ip6_tables,iptable_filter,ip_table s
parport_pc 15705 0
ppdev 4459 0
lp 5798 0
parport 21222 3 parport_pc,ppdev,lp
acpi_cpufreq 4539 1
mperf 959 1 acpi_cpufreq
cpufreq_conservative 6190 0
cpufreq_userspace 1500 0
cpufreq_powersave 614 0
cpufreq_stats 1934 0
sco 5947 2
bnep 7490 2
rfcomm 24320 7
l2cap 26406 6 bnep,rfcomm
crc16 1035 1 l2cap
bluetooth 37018 6 sco,bnep,rfcomm,l2cap
vboxnetadp 5018 0
vboxnetflt 11924 0
vboxdrv 125789 2 vboxnetadp,vboxnetflt
binfmt_misc 4974 1
uinput 5106 1
fuse 47270 1
tun 9536 0
loop 10184 0
firewire_sbp2 9713 0
joydev 7004 0
snd_hda_codec_atihdmi 1703 1
snd_hda_codec_idt 37349 1
arc4 1002 2
snd_hda_intel 16641 5
ecb 1413 2
snd_hda_codec 55937 3 snd_hda_codec_atihdmi,snd_hda_codec_idt,snd_hda_in tel
snd_hwdep 4038 1 snd_hda_codec
snd_pcm_oss 27474 0
snd_mixer_oss 10359 1 snd_pcm_oss
snd_pcm 47052 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3602 0
snd_rawmidi 12629 1 snd_seq_midi
iwlagn 94832 0
snd_seq_midi_event 3750 1 snd_seq_midi
fglrx 2204755 972
snd_seq 34688 3 snd_seq_midi,snd_seq_midi_event
r852 7412 0
sm_common 2822 1 r852
nand 27227 2 r852,sm_common
nand_ids 2573 1 nand
nand_ecc 2996 1 nand
iwlcore 52983 1 iwlagn
mac80211 143631 2 iwlagn,iwlcore
uvcvideo 45373 0
cfg80211 97919 3 iwlagn,iwlcore,mac80211
videodev 45494 1 uvcvideo
video 15297 0
snd_timer 12485 3 snd_pcm,snd_seq
dell_wmi 2207 0
snd_seq_device 3659 3 snd_seq_midi,snd_rawmidi,snd_seq
dell_laptop 4620 0
i2c_i801 6346 0
output 1212 1 video
tpm_tis 5365 0
rfkill 10806 5 bluetooth,cfg80211,dell_laptop
v4l1_compat 10366 2 uvcvideo,videodev
battery 4122 0
wmi 6073 1 dell_wmi
ac 1656 0
psmouse 38325 0
snd 34129 20 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_ hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmid i,snd_seq,snd_timer,snd_seq_device
tpm 7955 1 tpm_tis
tpm_bios 3573 1 tpm
i2c_core 12882 2 videodev,i2c_i801
evdev 5563 35
button 3610 0
dcdbas 3804 1 dell_laptop
serio_raw 2902 0
mtd 12458 2 sm_common,nand
processor 22783 3 acpi_cpufreq
pcspkr 1219 0
soundcore 3426 1 snd
snd_page_alloc 5125 2 snd_hda_intel,snd_pcm
shpchp 18179 0
pci_hotplug 16971 1 shpchp
ext3 92361 3
jbd 31860 1 ext3
mbcache 3776 1 ext3
sha256_generic 9077 2
aes_i586 6828 5
aes_generic 25766 1 aes_i586
cbc 1975 1
usbhid 26620 0
hid 50479 1 usbhid
dm_crypt 8911 1
dm_mod 49160 12 dm_crypt
sg 15859 0
sd_mod 24186 3
sr_mod 11029 0
cdrom 25872 1 sr_mod
crc_t10dif 1020 1 sd_mod
uhci_hcd 15814 0
ahci 16601 2
libahci 13292 1 ahci
libata 115612 2 ahci,libahci
ehci_hcd 28209 0
sdhci_pci 4961 0
sdhci 12236 1 sdhci_pci
firewire_ohci 19311 0
tg3 94567 0
scsi_mod 128096 6 usb_storage,firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore 95058 6 usb_storage,uvcvideo,usbhid,uhci_hcd,ehci_hcd
mmc_core 44484 2 mmc_block,sdhci
firewire_core 35432 2 firewire_sbp2,firewire_ohci
crc_itu_t 1039 1 firewire_core
libphy 12040 1 tg3
led_class 1567 1 sdhci
thermal 9458 0
thermal_sys 9328 3 video,processor,thermal
nls_base 4521 5 nls_utf8,nls_cp437,vfat,fat,usbcore

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet static
address 192.168.1.10
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
dns-nameservers 192.168.1.1

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:26:b9:04:23:52 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:21:6a:03:fa:8e brd ff:ff:ff:ff:ff:ff
inet 192.168.178.26/24 brd 192.168.178.255 scope global wlan0
inet6 fe80::221:6aff:fe03:fa8e/64 scope link
valid_lft forever preferred_lft forever
4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 38936 938 0 0 0 0 0 0 38936 938 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 329859740 240720 0 0 0 0 0 0 20470164 152032 0 0 0 0 0 0
vboxnet0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

*** Protocol statistics:
Ip:
241664 total packets received
0 forwarded
0 incoming packets discarded
241383 incoming packets delivered
152212 requests sent out
11 dropped because of missing route
Icmp:
155 ICMP messages received
10 input ICMP message failed.
ICMP input histogram:
destination unreachable: 155
6 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 6
IcmpMsg:
InType3: 155
OutType3: 6
Tcp:
2277 active connections openings
21 passive connection openings
153 failed connection attempts
27 connection resets received
3 connections established
232259 segments received
142288 segments send out
93 segments retransmited
0 bad segments received.
844 resets sent
Udp:
9049 packets received
2 packets to unknown port received.
0 packet receive errors
9839 packets sent
UdpLite:
TcpExt:
1174 TCP sockets finished time wait in fast timer
1162 delayed acks sent
Quick ack mode was activated 106 times
914 packets directly queued to recvmsg prequeue.
1070935 bytes directly received in process context from prequeue
206617 packet headers predicted
709 packets header predicted and directly queued to user
3316 acknowledgments not containing data payload received
1990 predicted acknowledgments
34 congestion windows recovered without slow start after partial ack
85 other TCP timeouts
95 DSACKs sent for old packets
34 DSACKs received
111 connections reset due to unexpected data
4 connections reset due to early user close
1 connections aborted due to timeout
TCPDSACKIgnoredOld: 3
TCPDSACKIgnoredNoUndo: 22
IpExt:
InMcastPkts: 359
OutMcastPkts: 375
InBcastPkts: 87
OutBcastPkts: 85
InOctets: 326589788
OutOctets: 15260398
InMcastOctets: 60476
OutMcastOctets: 62915
InBcastOctets: 16814
OutBcastOctets: 15662

*** Device features:
eth1: 0x1949b3
lo: 0x13865
vboxnet0: 0x0
wlan0: 0x2000

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc000000-fc0fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 0: Memory at fc504800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fc500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: fc100000-fc1fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc504c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=32
Memory behind bridge: fc200000-fc2fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 40
Region 0: I/O ports at 18f0 [size=8]
Region 1: I/O ports at 18e4 [size=4]
Region 2: I/O ports at 18e8 [size=8]
Region 3: I/O ports at 18e0 [size=4]
Region 4: I/O ports at 18c0 [size=32]
Region 5: Memory at fc504000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c0200000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] [1002:9553] (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fc020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci

01:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38]
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 43
Region 0: Memory at fc010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

04:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn

08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3

09:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fc200000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

09:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) (prog-if 01)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fc200800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci

09:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at fc201000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

09:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fc201400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r852


** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c313 Logitech, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 008: ID 067b:3507 Prolific Technology, Inc. PL3507 ATAPI6 Bridge
Bus 002 Device 007: ID 046d:c01e Logitech, Inc. MX518 Optical Mouse
Bus 002 Device 004: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0c45:63ea Microdia
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.36-trunk-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.36-trunk-686-bigmem depends on:
ii debconf [debconf 1.5.36 Debian configuration management sy
ii initramfs-tools 0.98.5 tools for generating an initramfs
ii linux-base 2.6.36-1~experimental.1 Linux image base package
ii module-init-tool 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.36-trunk-686-bigmem recommends:
ii firmware-linux-f 2.6.36-1~experimental.1 Binary firmware for various driver
ii libc6-i686 2.11.2-6+squeeze1 Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.36-trunk-686-bigmem suggests:
ii grub 0.97-63 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.36 <none> (no description available)

Versions of packages linux-image-2.6.36-trunk-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.27 Binary firmware for Intel Wireless
ii firmware-linux 0.27 Binary firmware for various driver
ii firmware-linux-nonfree 0.27 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information excluded



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20101115125254.15299.21841.reportbug@rincewind">ht tp://lists.debian.org/20101115125254.15299.21841.reportbug@rincewind
 

Thread Tools




All times are GMT. The time now is 10:07 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org