FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 11-06-2010, 02:48 PM
alex
 
Default Bug#577211: I'm experiencing similar problems...

Hi,

From a few upgrades (~one or two months) my system is unusable
while making disk I/O operations, mainly related with kjournald and
flush-8:0 processes (at least, iotop show them as the problem)


I found some people with similar problems which are runing hdparm
for sleep/iddle hd, but I don't set this feature on my disk. Also, I'm
using acpi for slowing down cpu frequency on iddle, but I tried to disable
it and the problem persists


I am running sid (dist-upgrade daily) on intel dual core with 4 Gb
RAM.


Linux aspirex1700 2.6.32-5-amd64 #1 SMP Wed Oct 20 00:05:22 UTC 2010
x86_64 GNU/Linux


Also I attached more sysinfo, feel free to request more...processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Pentium(R) Dual-Core CPU E5300 @ 2.60GHz
stepping : 10
cpu MHz : 1203.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm
bogomips : 5200.58
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Pentium(R) Dual-Core CPU E5300 @ 2.60GHz
stepping : 10
cpu MHz : 1203.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm
bogomips : 5199.94
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-26) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Oct 20 00:05:22 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=6724c0e7-4868-48de-8782-ecd541978601 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000affa0000 (usable)
[ 0.000000] BIOS-e820: 00000000affa0000 - 00000000affae000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000affae000 - 00000000affe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000affe0000 - 00000000c0100000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xaffa0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000affa0000
[ 0.000000] 0000000000 - 00afe00000 page 2M
[ 0.000000] 00afe00000 - 00affa0000 page 4k
[ 0.000000] kernel direct mapping tables up to affa0000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000
[ 0.000000] RAMDISK: 3774c000 - 37fefa99
[ 0.000000] ACPI: RSDP 00000000000fa8e0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000affa0000 0004C (v01 ACRSYS ACRPRDCT 20090226 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000affa0200 00084 (v01 022609 FACP2241 20090226 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000affa0620 060BA (v01 1AAAA 1AAAA000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000affae000 00040
[ 0.000000] ACPI: APIC 00000000affa0390 00080 (v01 022609 APIC2241 20090226 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000affa0410 0003C (v01 022609 OEMMCFG 20090226 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000affa0450 00176 (v01 ACRSYS ACRPRDCT 20090226 MSFT 00000097)
[ 0.000000] ACPI: WDRT 00000000affa05d0 00047 (v01 022609 NV-WDRT 20090226 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000affae040 00071 (v01 022609 OEMB2241 20090226 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000affa66e0 00038 (v01 022609 OEMHPET0 20090226 MSFT 00000097)
[ 0.000000] ACPI: NVHD 00000000affae0c0 00554 (v01 022609 NVHDCP 20090226 MSFT 00000097)
[ 0.000000] ACPI: AWMI 00000000affae620 0004E (v01 022609 OEMB2241 20090226 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000affaeb70 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [0000000000014000 - 000000000001bfff]
[ 0.000000] bootmap [000000000001c000 - 0000000000043fff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001688414] TEXT DATA BSS ==> [0001000000 - 0001688414]
[ 0.000000] #3 [003774c000 - 0037fefa99] RAMDISK ==> [003774c000 - 0037fefa99]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0001689000 - 00016891ec] BRK ==> [0001689000 - 00016891ec]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff880004dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000affa0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 982831
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3824 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 702424 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000affa0000 - 00000000affae000
[ 0.000000] PM: Registered nosave memory: 00000000affae000 - 00000000affe0000
[ 0.000000] PM: Registered nosave memory: 00000000affe0000 - 00000000c0100000
[ 0.000000] PM: Registered nosave memory: 00000000c0100000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0100000 (gap: c0100000:3eb00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005000000 s90328 r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 964808
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=6724c0e7-4868-48de-8782-ecd541978601 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000519e000 - ffff88000919e000
[ 0.000000] software IO TLB at phys 0x519e000 - 0x919e000
[ 0.000000] Memory: 3793628k/5242880k available (3076k kernel code, 1311556k absent, 137696k reserved, 1894k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2600.294 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.58 BogoMIPS (lpj=10401176)
[ 0.004027] Security Framework initialized
[ 0.004033] SELinux: Disabled at boot.
[ 0.004305] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008597] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009727] Mount-cache hash table entries: 256
[ 0.009896] Initializing cgroup subsys ns
[ 0.009901] Initializing cgroup subsys cpuacct
[ 0.009904] Initializing cgroup subsys devices
[ 0.009906] Initializing cgroup subsys freezer
[ 0.009908] Initializing cgroup subsys net_cls
[ 0.009933] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.009935] CPU: L2 cache: 2048K
[ 0.009938] CPU 0/0x0 -> Node 0
[ 0.009939] CPU: Physical Processor ID: 0
[ 0.009941] CPU: Processor Core ID: 0
[ 0.009944] mce: CPU supports 6 MCE banks
[ 0.009951] CPU0: Thermal monitoring enabled (TM2)
[ 0.009956] using mwait in idle threads.
[ 0.009958] Performance Events: Core2 events, Intel PMU driver.
[ 0.009963] ... version: 2
[ 0.009964] ... bit width: 40
[ 0.009965] ... generic registers: 2
[ 0.009967] ... value mask: 000000ffffffffff
[ 0.009968] ... max period: 000000007fffffff
[ 0.009969] ... fixed-purpose events: 3
[ 0.009970] ... event mask: 0000000700000003
[ 0.010837] ACPI: Core revision 20090903
[ 0.016071] Setting APIC routing to flat
[ 0.016463] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056562] CPU0: Intel Pentium(R) Dual-Core CPU E5300 @ 2.60GHz stepping 0a
[ 0.060001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.144078] CPU1: Intel Pentium(R) Dual-Core CPU E5300 @ 2.60GHz stepping 0a
[ 0.144086] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.148019] Brought up 2 CPUs
[ 0.148021] Total of 2 processors activated (10400.53 BogoMIPS).
[ 0.148450] CPU0 attaching sched-domain:
[ 0.148453] domain 0: span 0-1 level MC
[ 0.148455] groups: 0 1
[ 0.148459] CPU1 attaching sched-domain:
[ 0.148461] domain 0: span 0-1 level MC
[ 0.148462] groups: 1 0
[ 0.148514] devtmpfs: initialized
[ 0.150471] regulator: core version 0.5
[ 0.150471] NET: Registered protocol family 16
[ 0.150471] ACPI: bus type pci registered
[ 0.150471] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.150471] PCI: Not using MMCONFIG.
[ 0.150471] PCI: Using configuration type 1 for base access
[ 0.150471] bio: create slab <bio-0> at 0
[ 0.152527] ACPI: EC: Look up EC in DSDT
[ 0.154856] ACPI: BIOS _OSI(Linux) query ignored
[ 0.156695] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.160947] ACPI: Interpreter enabled
[ 0.160949] ACPI: (supports S0 S3 S4 S5)
[ 0.160965] ACPI: Using IOAPIC for interrupt routing
[ 0.161179] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.167319] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.176322] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.184123] ACPI Warning: Incorrect checksum in table [OEMB] - 16, should be 15 (20090903/tbutils-314)
[ 0.184313] ACPI: No dock devices found.
[ 0.184602] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.185540] pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff]
[ 0.185584] pci 0000:00:03.1: reg 10 io port: [0x4900-0x493f]
[ 0.185597] pci 0000:00:03.1: reg 20 io port: [0x4d00-0x4d3f]
[ 0.185601] pci 0000:00:03.1: reg 24 io port: [0x4e00-0x4e3f]
[ 0.185622] pci 0000:00:03.1: PME# supported from D3hot D3cold
[ 0.185627] pci 0000:00:03.1: PME# disabled
[ 0.185779] pci 0000:00:04.0: reg 10 32bit mmio: [0xfeaff000-0xfeafffff]
[ 0.185806] pci 0000:00:04.0: supports D1 D2
[ 0.185808] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.185811] pci 0000:00:04.0: PME# disabled
[ 0.185837] pci 0000:00:04.1: reg 10 32bit mmio: [0xfeafec00-0xfeafecff]
[ 0.185869] pci 0000:00:04.1: supports D1 D2
[ 0.185870] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.185873] pci 0000:00:04.1: PME# disabled
[ 0.185916] pci 0000:00:08.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.185957] pci 0000:00:09.0: reg 10 32bit mmio: [0xfeaf8000-0xfeafbfff]
[ 0.185987] pci 0000:00:09.0: PME# supported from D3hot D3cold
[ 0.185990] pci 0000:00:09.0: PME# disabled
[ 0.186061] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.186064] pci 0000:00:0b.0: PME# disabled
[ 0.186105] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.186107] pci 0000:00:0c.0: PME# disabled
[ 0.186148] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.186150] pci 0000:00:0d.0: PME# disabled
[ 0.186175] pci 0000:00:0e.0: reg 10 io port: [0xd480-0xd487]
[ 0.186179] pci 0000:00:0e.0: reg 14 io port: [0xd400-0xd403]
[ 0.186182] pci 0000:00:0e.0: reg 18 io port: [0xd080-0xd087]
[ 0.186186] pci 0000:00:0e.0: reg 1c io port: [0xd000-0xd003]
[ 0.186190] pci 0000:00:0e.0: reg 20 io port: [0xcc00-0xcc0f]
[ 0.186194] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfeafc000-0xfeafdfff]
[ 0.186234] pci 0000:00:0f.0: reg 10 32bit mmio: [0xfeaf7000-0xfeaf7fff]
[ 0.186238] pci 0000:00:0f.0: reg 14 io port: [0xc880-0xc887]
[ 0.186242] pci 0000:00:0f.0: reg 18 32bit mmio: [0xfeafe800-0xfeafe8ff]
[ 0.186246] pci 0000:00:0f.0: reg 1c 32bit mmio: [0xfeafe400-0xfeafe40f]
[ 0.186269] pci 0000:00:0f.0: supports D1 D2
[ 0.186271] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.186275] pci 0000:00:0f.0: PME# disabled
[ 0.186296] pci 0000:00:10.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.186302] pci 0000:00:10.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.186308] pci 0000:00:10.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
[ 0.186314] pci 0000:00:10.0: reg 30 32bit mmio pref: [0xfeac0000-0xfeadffff]
[ 0.186382] pci 0000:00:0a.0: transparent bridge
[ 0.186506] pci 0000:04:00.0: reg 10 64bit mmio: [0xfebff800-0xfebfffff]
[ 0.186512] pci 0000:04:00.0: reg 18 io port: [0xe800-0xe8ff]
[ 0.186553] pci 0000:04:00.0: supports D2
[ 0.186554] pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
[ 0.186558] pci 0000:04:00.0: PME# disabled
[ 0.192097] pci 0000:00:0d.0: bridge io port: [0xe000-0xefff]
[ 0.192102] pci 0000:00:0d.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.192128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.192323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.192404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.192458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.192511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.202303] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.202487] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.202669] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.202850] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.203032] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.203213] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.203394] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.203583] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *7
[ 0.203769] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
[ 0.203953] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.204150] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7
[ 0.204341] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.204525] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
[ 0.204714] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.204899] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.205084] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *9
[ 0.205294] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.205394] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.205396] vgaarb: loaded
[ 0.205416] PCI: Using ACPI for IRQ routing
[ 0.205416] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.205416] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.208032] Switching to clocksource tsc
[ 0.209023] pnp: PnP ACPI init
[ 0.209030] ACPI: bus type pnp registered
[ 0.213800] pnp: PnP ACPI: found 14 devices
[ 0.213801] ACPI: ACPI bus type pnp unregistered
[ 0.213810] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.213813] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.213815] system 00:05: ioport range 0x4000-0x407f has been reserved
[ 0.213817] system 00:05: ioport range 0x4080-0x40ff has been reserved
[ 0.213820] system 00:05: ioport range 0x4400-0x447f has been reserved
[ 0.213822] system 00:05: ioport range 0x4480-0x44ff has been reserved
[ 0.213824] system 00:05: ioport range 0x4800-0x487f has been reserved
[ 0.213827] system 00:05: ioport range 0x4880-0x48ff has been reserved
[ 0.213830] system 00:05: iomem range 0xfec80000-0x1fd93ffff could not be reserved
[ 0.213832] system 00:05: iomem range 0xfed02000-0xfed03fff has been reserved
[ 0.213834] system 00:05: iomem range 0xfed04000-0xfed04fff has been reserved
[ 0.213837] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.213842] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.213844] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.213849] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.213851] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.213853] system 00:0b: ioport range 0xa20-0xa2f has been reserved
[ 0.213856] system 00:0b: ioport range 0xa30-0xa3f has been reserved
[ 0.213860] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.213864] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.213866] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.213869] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.213871] system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.213874] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.218552] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.218553] pci 0000:00:0a.0: IO window: disabled
[ 0.218557] pci 0000:00:0a.0: MEM window: disabled
[ 0.218559] pci 0000:00:0a.0: PREFETCH window: disabled
[ 0.218563] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.218565] pci 0000:00:0b.0: IO window: disabled
[ 0.218567] pci 0000:00:0b.0: MEM window: disabled
[ 0.218570] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.218573] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.218575] pci 0000:00:0c.0: IO window: disabled
[ 0.218577] pci 0000:00:0c.0: MEM window: disabled
[ 0.218580] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.218583] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
[ 0.218585] pci 0000:00:0d.0: IO window: 0xe000-0xefff
[ 0.218589] pci 0000:00:0d.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.218591] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.218599] pci 0000:00:0a.0: setting latency timer to 64
[ 0.218604] pci 0000:00:0b.0: setting latency timer to 64
[ 0.218609] pci 0000:00:0c.0: setting latency timer to 64
[ 0.218615] pci 0000:00:0d.0: setting latency timer to 64
[ 0.218618] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.218620] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.218622] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.218624] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.218626] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.218628] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.218654] NET: Registered protocol family 2
[ 0.218795] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.220295] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.224827] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.225393] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.225396] TCP reno registered
[ 0.225542] NET: Registered protocol family 1
[ 0.255888] pci 0000:00:10.0: Boot video device
[ 0.255968] Unpacking initramfs...
[ 0.428158] Freeing initrd memory: 8846k freed
[ 0.435158] audit: initializing netlink socket (disabled)
[ 0.435173] type=2000 audit(1288433516.431:1): initialized
[ 0.437882] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.439001] VFS: Disk quotas dquot_6.5.2
[ 0.439041] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.439110] msgmni has been set to 7426
[ 0.439269] alg: No test for stdrng (krng)
[ 0.439307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.439309] io scheduler noop registered
[ 0.439311] io scheduler anticipatory registered
[ 0.439312] io scheduler deadline registered
[ 0.439338] io scheduler cfq registered (default)
[ 0.439439] alloc irq_desc for 24 on node -1
[ 0.439440] alloc kstat_irqs on node -1
[ 0.439450] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 0.439456] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.439527] alloc irq_desc for 25 on node -1
[ 0.439529] alloc kstat_irqs on node -1
[ 0.439534] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
[ 0.439538] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.439610] alloc irq_desc for 26 on node -1
[ 0.439611] alloc kstat_irqs on node -1
[ 0.439616] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
[ 0.439621] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.440883] Linux agpgart interface v0.103
[ 0.440917] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.441007] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.441231] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.441390] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.441441] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.441818] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.441823] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.441874] mice: PS/2 mouse device common for all mice
[ 0.441908] rtc_cmos 00:07: RTC can wake from S4
[ 0.441937] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.441969] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.441978] cpuidle: using governor ladder
[ 0.441980] cpuidle: using governor menu
[ 0.441983] No iBFT detected.
[ 0.442234] TCP cubic registered
[ 0.442315] NET: Registered protocol family 10
[ 0.442684] lo: Disabled Privacy Extensions
[ 0.442890] Mobile IPv6
[ 0.442892] NET: Registered protocol family 17
[ 0.442958] PM: Resume from disk failed.
[ 0.442966] registered taskstats version 1
[ 0.443275] rtc_cmos 00:07: setting system clock to 2010-10-30 10:11:57 UTC (1288433517)
[ 0.443300] Initalizing network drop monitor service
[ 0.443321] Freeing unused kernel memory: 584k freed
[ 0.443635] Write protecting the kernel read-only data: 4232k
[ 0.454523] udev[56]: starting version 164
[ 0.461580] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.535972] SCSI subsystem initialized
[ 0.538879] usbcore: registered new interface driver usbfs
[ 0.538902] usbcore: registered new interface driver hub
[ 0.538928] usbcore: registered new device driver usb
[ 0.552635] libata version 3.00 loaded.
[ 0.553890] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.554251] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 0.554255] alloc irq_desc for 23 on node -1
[ 0.554257] alloc kstat_irqs on node -1
[ 0.554265] forcedeth 0000:00:0f.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 0.554269] forcedeth 0000:00:0f.0: setting latency timer to 64
[ 0.557866] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.559365] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.559372] ACPI: Thermal Zone [THRM] (26 C)
[ 0.561295] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.562614] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[ 0.562619] alloc irq_desc for 19 on node -1
[ 0.562621] alloc kstat_irqs on node -1
[ 0.562629] firewire_ohci 0000:04:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
[ 0.562634] firewire_ohci 0000:04:00.0: setting latency timer to 64
[ 0.616899] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:21:97:c7:6d:6c
[ 0.616902] forcedeth 0000:00:0f.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 0.617218] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.617223] alloc irq_desc for 22 on node -1
[ 0.617224] alloc kstat_irqs on node -1
[ 0.617229] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.617248] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.617250] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.617273] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.617304] ehci_hcd 0000:00:04.1: debug port 1
[ 0.617312] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 0.617327] ehci_hcd 0000:00:04.1: irq 22, io mem 0xfeafec00
[ 0.627772] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.627802] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.627806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.627810] usb usb1: Product: EHCI Host Controller
[ 0.627814] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.627817] usb usb1: SerialNumber: 0000:00:04.1
[ 0.627891] usb usb1: configuration #1 chosen from 1 choice
[ 0.627916] hub 1-0:1.0: USB hub found
[ 0.627922] hub 1-0:1.0: 10 ports detected
[ 0.627974] ahci 0000:00:0e.0: version 3.0
[ 0.628272] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 0.628275] alloc irq_desc for 21 on node -1
[ 0.628276] alloc kstat_irqs on node -1
[ 0.628282] ahci 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 0.628325] alloc irq_desc for 27 on node -1
[ 0.628326] alloc kstat_irqs on node -1
[ 0.628334] ahci 0000:00:0e.0: irq 27 for MSI/MSI-X
[ 0.628340] ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
[ 0.628404] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.628407] ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pmp pio
[ 0.628410] ahci 0000:00:0e.0: setting latency timer to 64
[ 0.628735] scsi0 : ahci
[ 0.628854] scsi1 : ahci
[ 0.628908] scsi2 : ahci
[ 0.628961] scsi3 : ahci
[ 0.629066] ata1: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc100 irq 27
[ 0.629069] ata2: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc180 irq 27
[ 0.629071] ata3: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc200 irq 27
[ 0.629073] ata4: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc280 irq 27
[ 0.629100] pata_amd 0000:00:08.0: version 0.4.1
[ 0.629149] pata_amd 0000:00:08.0: setting latency timer to 64
[ 0.629443] scsi4 : pata_amd
[ 0.629523] scsi5 : pata_amd
[ 0.630488] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.630491] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.630825] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 0.630829] alloc irq_desc for 20 on node -1
[ 0.630831] alloc kstat_irqs on node -1
[ 0.630837] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 0.630862] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.630865] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.630879] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[ 0.630908] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfeaff000
[ 0.639759] firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI version 1.10
[ 0.685599] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.685602] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.685603] usb usb2: Product: OHCI Host Controller
[ 0.685605] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.685607] usb usb2: SerialNumber: 0000:00:04.0
[ 0.685670] usb usb2: configuration #1 chosen from 1 choice
[ 0.685695] hub 2-0:1.0: USB hub found
[ 0.685703] hub 2-0:1.0: 10 ports detected
[ 0.939288] usb 1-7: new high speed USB device using ehci_hcd and address 2
[ 0.947378] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.947394] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.071798] usb 1-7: New USB device found, idVendor=0bda, idProduct=0151
[ 1.071803] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.071807] usb 1-7: Product: USB2.0-CRW
[ 1.071810] usb 1-7: Manufacturer: Generic
[ 1.071813] usb 1-7: SerialNumber: 20060413092100000
[ 1.071902] usb 1-7: configuration #1 chosen from 1 choice
[ 1.077433] Initializing USB Mass Storage driver...
[ 1.077514] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.077584] usbcore: registered new interface driver usb-storage
[ 1.077586] USB Mass Storage support registered.
[ 1.077590] usb-storage: device found at 2
[ 1.077591] usb-storage: waiting for device to settle before scanning
[ 1.096016] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.096514] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.096981] ata2.00: ATAPI: ATAPI DVD A DH16A6S, YA16, max UDMA/100
[ 1.097632] ata2.00: configured for UDMA/100
[ 1.104538] ata1.00: ATA-8: WDC WD5000AAJS-00YFA0, 12.01C02, max UDMA/133
[ 1.104543] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.105338] ata1.00: configured for UDMA/133
[ 1.105435] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAJS-0 12.0 PQ: 0 ANSI: 5
[ 1.106534] scsi 1:0:0:0: CD-ROM ATAPI DVD A DH16A6S YA16 PQ: 0 ANSI: 5
[ 1.106739] ata6: port disabled. ignoring.
[ 1.115578] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.115620] sd 0:0:0:0: [sda] Write Protect is off
[ 1.115622] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.115640] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.115784] sda:sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.118242] Uniform CD-ROM driver Revision: 3.20
[ 1.118371] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.124099] firewire_core: created device fw0: GUID 00000ae6ffe84e6d, S400
[ 1.125788] sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
[ 1.177103] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.180263] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.181109] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.750950] PM: Starting manual resume from disk
[ 1.750953] PM: Resume from partition 8:11
[ 1.750954] PM: Checking hibernation image.
[ 1.751143] PM: Error -22 checking image file
[ 1.751145] PM: Resume from disk failed.
[ 1.760941] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 1.760946] EXT3-fs: write access will be enabled during recovery.
[ 1.776284] kjournald starting. Commit interval 5 seconds
[ 1.776301] EXT3-fs: recovery complete.
[ 1.776548] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.185491] udev[329]: starting version 164
[ 3.445151] ACPI: WMI: Mapper loaded
[ 3.525643] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 3.525654] ACPI: Power Button [PWRB]
[ 3.525728] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.525731] ACPI: Power Button [PWRF]
[ 3.555012] ACPI: SSDT 00000000affae670 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 3.555249] processor LNXCPU:00: registered as cooling_device0
[ 3.555562] ACPI: SSDT 00000000affae8f0 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 3.555766] processor LNXCPU:01: registered as cooling_device1
[ 3.608925] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.650234] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[ 3.650249] i2c i2c-1: nForce2 SMBus adapter at 0x4e00
[ 3.887208] input: PS2++ Logitech TrackMan as /devices/platform/i8042/serio1/input/input5
[ 4.045391] nvidia: module license 'NVIDIA' taints kernel.
[ 4.045394] Disabling lock debugging due to kernel taint
[ 4.548921] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23
[ 4.548926] nvidia 0000:00:10.0: PCI INT A -> Link[SGRU] -> GSI 23 (level, low) -> IRQ 23
[ 4.548932] nvidia 0000:00:10.0: setting latency timer to 64
[ 4.548936] vgaarb: device changed decodes: PCI:0000:00:10.0,olddecodes=io+mem,decodes=nonew ns=io+mem
[ 4.549202] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.31 Thu Jun 3 08:19:50 PDT 2010
[ 4.645493] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 4.645501] acer-wmi: No or unsupported WMI interface, unable to load
[ 5.276383] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[ 5.276411] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[ 5.276690] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 5.276695] HDA Intel 0000:00:09.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 5.276697] hda_intel: Disable MSI for Nvidia chipset
[ 5.276737] HDA Intel 0000:00:09.0: setting latency timer to 64
[ 6.076142] usb-storage: device scan complete
[ 6.081513] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 6.086381] scsi 6:0:0:1: Direct-Access Generic- SM/xD/SD/MMC/MS 1.00 PQ: 0 ANSI: 0 CCS
[ 6.086777] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.087232] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 6.089365] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.090234] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 6.264097] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.0/input/input6
[ 6.909522] Adding 979924k swap on /dev/sda11. Priority:-1 extents:1 across:979924k
[ 7.306855] EXT3 FS on sda5, internal journal
[ 7.409689] loop: module loaded
[ 7.470411] it87: Found IT8718F chip at 0xa10, revision 4
[ 7.470425] it87: in3 is VCC (+5V)
[ 7.470426] it87: in7 is VCCH (+5V Stand-By)
[ 7.470451] ACPI: I/O resource it87 [0xa15-0xa16] conflicts with ACPI region HHHD [0xa15-0xa16]
[ 7.470506] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.522486] kjournald starting. Commit interval 5 seconds
[ 11.522710] EXT3 FS on sda6, internal journal
[ 11.522716] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.567276] kjournald starting. Commit interval 5 seconds
[ 11.567490] EXT3 FS on sda7, internal journal
[ 11.567496] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.633967] kjournald starting. Commit interval 5 seconds
[ 11.634219] EXT3 FS on sda10, internal journal
[ 11.634224] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.775584] kjournald starting. Commit interval 5 seconds
[ 11.775805] EXT3 FS on sda8, internal journal
[ 11.775810] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.840728] kjournald starting. Commit interval 5 seconds
[ 11.840926] EXT3 FS on sda9, internal journal
[ 11.840931] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.063507] kjournald starting. Commit interval 5 seconds
[ 12.063853] EXT3 FS on sda12, internal journal
[ 12.063860] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.753175] fuse init (API version 7.13)
[ 15.074559] alloc irq_desc for 28 on node -1
[ 15.074564] alloc kstat_irqs on node -1
[ 15.074580] forcedeth 0000:00:0f.0: irq 28 for MSI/MSI-X
[ 25.588505] eth0: no IPv6 routers present
[ 25.644143] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 25.644145] vboxdrv: Successfully done.
[ 25.644147] vboxdrv: Found 2 processor cores.
[ 25.644198] VBoxDrv: dbg - g_abExecMemory=ffffffffa0d4e6c0
[ 25.644217] vboxdrv: fAsync=0 offMin=0x186 offMax=0x6db
[ 25.644258] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 25.644259] vboxdrv: Successfully loaded version 3.2.10_OSE (interface 0x00140001).
[ 655.032212] lo: Disabled Privacy Extensions
[ 1027.060220] lo: Disabled Privacy Extensions
[ 2692.638084] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2692.639850] SGI XFS Quota Management subsystem
[ 2692.680891] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2692.755859] NTFS driver 2.1.29 [Flags: R/W MODULE].
[ 2692.834607] QNX4 filesystem 0.2.3 registered.
[ 2692.928069] Btrfs loaded
[13666.744034] usb 1-9: new high speed USB device using ehci_hcd and address 3
[13666.878188] usb 1-9: New USB device found, idVendor=05e3, idProduct=0702
[13666.878194] usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[13666.878199] usb 1-9: Product: USB TO IDE
[13666.878336] usb 1-9: configuration #1 chosen from 1 choice
[13666.878747] scsi7 : SCSI emulation for USB Mass Storage devices
[13666.878969] usb-storage: device found at 3
[13666.878972] usb-storage: waiting for device to settle before scanning
[13671.876798] usb-storage: device scan complete
[13671.887157] scsi 7:0:0:0: Direct-Access FUJITSU MHT2040AT 0811 PQ: 0 ANSI: 0
[13671.887844] sd 7:0:0:0: Attached scsi generic sg4 type 0
[13671.889386] sd 7:0:0:0: [sdd] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[13671.892005] sd 7:0:0:0: [sdd] Test WP failed, assume Write Enabled
[13671.892010] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[13671.898997] sd 7:0:0:0: [sdd] Test WP failed, assume Write Enabled
[13671.899002] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[13671.899008] sdd: sdd1
[13671.916993] sd 7:0:0:0: [sdd] Test WP failed, assume Write Enabled
[13671.916996] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[13671.916999] sd 7:0:0:0: [sdd] Attached SCSI disk
[16632.289482] lo: Disabled Privacy Extensions
[21806.306504] lo: Disabled Privacy Extensions
[22367.109390] lo: Disabled Privacy Extensions
[22934.997872] usb 1-9: USB disconnect, address 3
[43272.498236] lo: Disabled Privacy Extensions
[84527.113101] lo: Disabled Privacy Extensions
[130897.218695] lo: Disabled Privacy Extensions
[131304.971504] lo: Disabled Privacy Extensions
[132825.296810] lo: Disabled Privacy Extensions
[133650.690381] lo: Disabled Privacy Extensions
[148018.895161] amulegui[2298]: segfault at 7f67ffffffef ip 0000000000433c66 sp 00007fffb9b3f590 error 4 in amulegui[400000+256000]
[193498.979234] lo: Disabled Privacy Extensions
[218104.226573] WindowMaker[2252]: segfault at 8 ip 000000000042d056 sp 00007ffffa5b2750 error 4 in WindowMaker[400000+9d000]
[548160.484080] INFO: task java:18145 blocked for more than 120 seconds.
[548160.484087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[548160.484091] java D ffff88000508fb30 0 18145 4126 0x00000000
[548160.484099] ffff88013fa5b880 0000000000000086 ffff88006a599e38 ffff88006a599e34
[548160.484107] ffff88008cdaf150 ffff88006a599e18 000000000000f9e0 ffff88006a599fd8
[548160.484113] 0000000000015780 0000000000015780 ffff880037bb8e20 ffff880037bb9118
[548160.484120] Call Trace:
[548160.484135] [<ffffffff810b4700>] ? wait_on_page_writeback_range+0xce/0x11b
[548160.484169] [<ffffffffa0129f74>] ? log_wait_commit+0xbf/0x112 [jbd]
[548160.484176] [<ffffffff81064ad6>] ? autoremove_wake_function+0x0/0x2e
[548160.484188] [<ffffffffa013a3f8>] ? ext3_sync_file+0x94/0xc8 [ext3]
[548160.484196] [<ffffffff8110b5b4>] ? vfs_fsync_range+0x73/0x9e
[548160.484201] [<ffffffff8110b65e>] ? do_fsync+0x28/0x39
[548160.484206] [<ffffffff8110b68d>] ? sys_fsync+0xb/0x10
[548160.484212] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[548400.484061] INFO: task java:18145 blocked for more than 120 seconds.
[548400.484067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[548400.484071] java D ffff88000508fb30 0 18145 4126 0x00000000
[548400.484078] ffff88013fa5b880 0000000000000086 ffff88006a599e38 ffff88006a599e34
[548400.484086] ffff88008cdaf150 ffff88006a599e18 000000000000f9e0 ffff88006a599fd8
[548400.484092] 0000000000015780 0000000000015780 ffff880037bb8e20 ffff880037bb9118
[548400.484099] Call Trace:
[548400.484111] [<ffffffff810b4700>] ? wait_on_page_writeback_range+0xce/0x11b
[548400.484136] [<ffffffffa0129f74>] ? log_wait_commit+0xbf/0x112 [jbd]
[548400.484142] [<ffffffff81064ad6>] ? autoremove_wake_function+0x0/0x2e
[548400.484153] [<ffffffffa013a3f8>] ? ext3_sync_file+0x94/0xc8 [ext3]
[548400.484160] [<ffffffff8110b5b4>] ? vfs_fsync_range+0x73/0x9e
[548400.484166] [<ffffffff8110b65e>] ? do_fsync+0x28/0x39
[548400.484170] [<ffffffff8110b68d>] ? sys_fsync+0xb/0x10
[548400.484176] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[552870.952022] usb 1-9: new high speed USB device using ehci_hcd and address 4
[552871.091239] usb 1-9: New USB device found, idVendor=041e, idProduct=4152
[552871.091245] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[552871.091249] usb 1-9: Product: Creative ZEN V Plus
[552871.091253] usb 1-9: Manufacturer: Creative Technology Ltd
[552871.091256] usb 1-9: SerialNumber: D55C0C164003035C
[552871.091398] usb 1-9: configuration #1 chosen from 1 choice
[565146.559138] gnome-mplayer[18563]: segfault at 8 ip 00007f5a30544370 sp 00007fffddbb6998 error 4 in libdbus-1.so.3.4.0[7f5a3051d000+3e000]
[612715.615484] usb 1-9: USB disconnect, address 4
Module Size Used by
tcp_diag 880 0
inet_diag 6882 1 tcp_diag
btrfs 375287 0
zlib_deflate 17746 1 btrfs
crc32c 2560 1
libcrc32c 1074 1 btrfs
ufs 56474 0
qnx4 6194 0
hfsplus 65270 0
hfs 37455 0
minix 21197 0
ntfs 162796 0
vfat 7884 0
msdos 6202 0
fat 40038 2 vfat,msdos
jfs 140105 0
xfs 436941 0
exportfs 3170 1 xfs
reiserfs 194156 0
ext4 289033 0
jbd2 67015 1 ext4
crc16 1319 1 ext4
ext2 52969 0
vboxnetadp 4193 0
vboxnetflt 12525 0
vboxdrv 1723671 2 vboxnetadp,vboxnetflt
binfmt_misc 6431 1
fuse 50273 1
cpufreq_conservative 5162 0
acpi_cpufreq 5555 0
hwmon_vid 1828 0
coretemp 4325 0
firewire_sbp2 11514 0
loop 11799 0
snd_hda_codec_nvhdmi 3279 1
snd_hda_codec_realtek 235538 1
snd_hda_intel 19987 6
snd_hda_codec 54244 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda _intel
snd_hwdep 5380 1 snd_hda_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60503 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4400 0
snd_rawmidi 15515 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15582 3 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 46446 21 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec, snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_ra wmidi,snd_seq,snd_timer,snd_seq_device
rfkill 13044 0
nvidia 10670090 28
soundcore 4598 1 snd
i2c_nforce2 5280 0
pcspkr 1699 0
psmouse 49777 0
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
led_class 2433 0
evdev 7352 8
serio_raw 3752 0
processor 30303 1 acpi_cpufreq
button 4650 0
i2c_core 15712 2 nvidia,i2c_nforce2
wmi 4323 0
ext3 106518 7
jbd 37085 1 ext3
mbcache 5050 3 ext4,ext2,ext3
sg 18744 0
sd_mod 29777 9
crc_t10dif 1276 1 sd_mod
sr_mod 12602 0
cdrom 29415 1 sr_mod
ata_generic 3015 0
usb_storage 39561 0
firewire_ohci 19468 0
ohci_hcd 19212 0
pata_amd 9869 0
thermal 11674 0
ehci_hcd 31135 0
ahci 32374 8
forcedeth 45448 0
libata 133616 3 ata_generic,pata_amd,ahci
thermal_sys 11942 2 processor,thermal
firewire_core 36800 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
usbcore 121938 4 usb_storage,ohci_hcd,ehci_hcd
scsi_mod 122117 6 firewire_sbp2,sg,sd_mod,sr_mod,usb_storage,libata
nls_base 6377 7 hfsplus,hfs,ntfs,vfat,fat,jfs,usbcore
00:00.0 Host bridge: nVidia Corporation MCP73 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a2)
00:01.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.2 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.3 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.4 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.5 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.6 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:02.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:03.0 ISA bridge: nVidia Corporation MCP73 LPC Bridge (rev a2)
00:03.1 SMBus: nVidia Corporation MCP73 SMBus (rev a1)
00:03.2 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1)
00:03.4 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation GeForce 7100/nForce 630i USB (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP73 [nForce 630i] USB 2.0 Controller (EHCI) (rev a1)
00:08.0 IDE interface: nVidia Corporation MCP73 IDE (rev a1)
00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
00:0a.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1)
00:0b.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1)
00:0c.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1)
00:0d.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1)
00:0e.0 SATA controller: nVidia Corporation GeForce 7100/nForce 630i SATA (rev a2)
00:0f.0 Ethernet controller: nVidia Corporation MCP73 Ethernet (rev a2)
00:10.0 VGA compatible controller: nVidia Corporation C73 [GeForce 7100 / nForce 630i] (rev a2)
04:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller
 

Thread Tools




All times are GMT. The time now is 04:39 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org