FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 09-29-2010, 12:25 PM
Pierre Habouzit
 
Default Bug#598492: linux-image-2.6.35-trunk-amd64: suspend/hibernate is totally fucked up

Package: linux-2.6
Version: 2.6.35-1~experimental.3
Severity: grave


With the 2.6.35 kernel, suspend and hibernation result is various kind
of issues on a random basis at "exit" time, meaning that sometimes the
suspend/hibernation doesn't put the machine to sleep, but instead I've
gotten:
- 100% CPUs instead of stopping the machine;
- blank screens with nothing able to wake up the machine (not even
sysrqs);
- kernel errors (for hibernation), though for some reason this wasn't
logged to /var/log.


In addition to that, for some reason, when I come back from suspend, my
keyboard mapping in X is lost, which doesn't happen if I boot a .32
kernel.


-- Package-specific info:
** Version:
Linux version 2.6.35-trunk-amd64 (Debian 2.6.35-1~experimental.3) (maks@debian.org) (gcc version 4.4.5 20100902 (prerelease) (Debian 4.4.4-13) ) #1 SMP Mon Sep 6 15:15:26 UTC 2010

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.35-trunk-amd64 root=/dev/mapper/ssd-root ro quiet i915.modeset=1

** Not tainted

** Kernel log:
[ 1788.609537] PM: Saving platform NVS memory
[ 1788.610392] PM: Saving platform NVS memory
[ 1788.611095] Disabling non-boot CPUs ...
[ 1788.716024] CPU 1 is now offline
[ 1788.716026] SMP alternatives: switching to UP code
[ 1788.720681] Extended CMOS year: 2000
[ 1788.720763] PM: Creating hibernation image:
[ 1788.724006] PM: Need to copy 128129 pages
[ 1788.724006] PM: Normal pages needed: 128129 + 1024, available pages: 908063
[ 1788.724006] PM: Restoring platform NVS memory
[ 1788.724006] Extended CMOS year: 2000
[ 1788.724006] Enabling non-boot CPUs ...
[ 1788.724006] SMP alternatives: switching to SMP code
[ 1788.725136] Booting Node 0 Processor 1 APIC 0x1
[ 1788.840807] CPU1 is up
[ 1788.841542] ACPI: Waking up from system sleep state S4
[ 1788.917419] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 1788.917434] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xefe1)
[ 1788.917438] e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xf6adb000)
[ 1788.917443] e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6ae0000)
[ 1788.917450] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 1788.917634] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 1788.918111] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[ 1788.918327] firewire_ohci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 1788.918328] firewire_ohci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[ 1788.933015] sdhci-pci 0000:03:01.1: BAR 0: set to [mem 0xf65ff600-0xf65ff6ff] (PCI address [0xf65ff600-0xf65ff6ff]
[ 1788.933041] sdhci-pci 0000:03:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[ 1788.933047] sdhci-pci 0000:03:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 1788.933136] PM: early restore of devices complete after 15.789 msecs
[ 1788.966805] i915 0000:00:02.0: setting latency timer to 64
[ 1788.966843] pci0000:00: wake-up capability disabled by ACPI
[ 1788.966848] e1000e 0000:00:19.0: PME# disabled
[ 1788.966923] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 1788.968978] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1788.969003] usb usb2: root hub lost power or was reset
[ 1788.969050] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1788.969087] usb usb3: root hub lost power or was reset
[ 1788.969106] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1788.969143] usb usb4: root hub lost power or was reset
[ 1788.969159] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1788.969180] usb usb1: root hub lost power or was reset
[ 1788.973056] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1788.973071] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1788.973108] usb usb5: root hub lost power or was reset
[ 1788.973126] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1788.973163] usb usb6: root hub lost power or was reset
[ 1788.973181] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1788.973219] usb usb7: root hub lost power or was reset
[ 1788.973237] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1788.973251] usb usb8: root hub lost power or was reset
[ 1788.977145] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1788.977157] pci 0000:00:1e.0: setting latency timer to 64
[ 1788.977169] ahci 0000:00:1f.2: setting latency timer to 64
[ 1788.977266] iwlagn 0000:0c:00.0: RF_KILL bit toggled to disable radio.
[ 1788.977271] sdhci-pci 0000:03:01.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1788.978344] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1788.978350] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1788.978385] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 1788.978688] sd 0:0:0:0: [sda] Starting disk
[ 1789.066105] firewire_core: skipped bus generations, destroying all nodes
[ 1789.113770] serial 00:09: activated
[ 1789.300048] ata6: SATA link down (SStatus 0 SControl 300)
[ 1789.316047] ata5: SATA link down (SStatus 0 SControl 300)
[ 1789.449034] usb 1-3: reset high speed USB device using ehci_hcd and address 3
[ 1789.464047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1789.467178] ata1.00: configured for UDMA/100
[ 1789.472042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1789.511482] ata2.00: configured for UDMA/100
[ 1789.522585] dell-wmi: Received unknown WMI event (0x11)
[ 1789.696037] usb 1-6: reset high speed USB device using ehci_hcd and address 6
[ 1789.911846] firewire_core: rediscovered device fw0
[ 1789.936019] usb 4-1: reset full speed USB device using uhci_hcd and address 2
[ 1790.188066] usb 1-4: reset high speed USB device using ehci_hcd and address 4
[ 1790.231948] dell-wmi: Received unknown WMI event (0x11)
[ 1790.580118] usb 1-3.1: reset low speed USB device using ehci_hcd and address 7
[ 1791.120118] usb 1-4.2: reset low speed USB device using ehci_hcd and address 8
[ 1791.414528] PM: restore of devices complete after 2447.986 msecs
[ 1791.414727] PM: Image restored successfully.
[ 1791.414728] Restarting tasks ...
[ 1791.414779] usb 2-1: USB disconnect, address 2
[ 1791.414781] usb 2-1.1: USB disconnect, address 3
[ 1791.415249] done.
[ 1791.415268] PM: Basic memory bitmaps freed
[ 1791.415271] video LNXVIDEO:01: Restoring backlight state
[ 1791.419828] usb 2-1.2: USB disconnect, address 4
[ 1793.304276] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 1793.360101] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 1793.360673] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1796.373933] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 1796.374356] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1806.656078] eth0: no IPv6 routers present
[ 2059.049409] Registering the dns_resolver key type
[ 2059.095180] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 2059.095196] CIFS VFS: Send error in SessSetup = -13
[ 2059.095215] CIFS VFS: cifs_mount failed w/return code = -13
[ 2077.962749] CIFS VFS: server 192.168.2.2 of type Samba 3.2.5 returned unexpected error on SMB posix open, disabling posix open support. Check if server update available.
[ 2549.717974] lo: Disabled Privacy Extensions
[ 3799.330727] lo: Disabled Privacy Extensions
[ 4223.341128] lo: Disabled Privacy Extensions
[ 7324.890054] lo: Disabled Privacy Extensions

** Model information
sys_vendor: Dell Inc.
product_name: Latitude E6400
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A19
board_vendor: Dell Inc.
board_name: 0U692R
board_version:

** Loaded modules:
Module Size Used by
nls_utf8 1357 1
cifs 228177 2
acpi_cpufreq 5893 1
mperf 1499 1 acpi_cpufreq
cpufreq_userspace 2296 0
cpufreq_conservative 9744 0
cpufreq_powersave 1026 0
cpufreq_stats 3052 0
sco 7932 2
bnep 10476 2
rfcomm 31435 0
l2cap 30128 6 bnep,rfcomm
crc16 1659 1 l2cap
bluetooth 49885 6 sco,bnep,rfcomm,l2cap
binfmt_misc 7037 1
kvm_intel 41978 0
kvm 248733 1 kvm_intel
microcode 22533 0
fuse 57953 3
ext3 112373 1
jbd 44134 1 ext3
mbcache 7044 1 ext3
coretemp 5524 0
i2c_dev 5012 0
firewire_sbp2 12277 0
loop 13422 0
snd_hda_codec_intelhdmi 9434 1
snd_hda_codec_idt 53360 1
arc4 1401 2
ecb 1959 2
iwlagn 108002 0
snd_hda_intel 22582 2
iwlcore 95177 1 iwlagn
mac80211 167357 2 iwlagn,iwlcore
snd_hda_codec 84698 3 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_ intel
snd_hwdep 5938 1 snd_hda_codec
snd_pcm 74040 2 snd_hda_intel,snd_hda_codec
uvcvideo 52022 0
videodev 41850 1 uvcvideo
v4l1_compat 11997 2 uvcvideo,videodev
joydev 9301 0
snd_timer 19068 1 snd_pcm
dell_wmi 2947 0
v4l2_compat_ioctl32 9658 1 videodev
tpm_tis 8758 0
battery 6220 0
tpm 14227 1 tpm_tis
tpm_bios 5425 1 tpm
wmi 8103 1 dell_wmi
cfg80211 135431 3 iwlagn,iwlcore,mac80211
dell_laptop 6242 0
snd 59675 10 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_ hwdep,snd_pcm,snd_timer
soundcore 6914 1 snd
psmouse 51060 0
snd_page_alloc 7724 2 snd_hda_intel,snd_pcm
pcspkr 1862 0
ac 2470 0
rfkill 17395 5 bluetooth,cfg80211,dell_laptop
dcdbas 6286 1 dell_laptop
evdev 7833 20
serio_raw 4102 0
i2c_i801 8901 0
processor 32368 3 acpi_cpufreq
xfs 645404 1
exportfs 3602 1 xfs
sha256_generic 9551 2
aes_x86_64 7808 2
aes_generic 27263 1 aes_x86_64
cbc 2689 1
hid_microsoft 2789 0
usbhid 36390 0
hid 69989 2 hid_microsoft,usbhid
dm_crypt 10920 1
dm_mod 62748 9 dm_crypt
btrfs 399431 1
zlib_deflate 19035 1 btrfs
crc32c 2703 1
libcrc32c 1332 1 btrfs
sg 20312 0
sd_mod 32903 4
sr_mod 13230 0
crc_t10dif 1515 1 sd_mod
cdrom 33007 1 sr_mod
i915 276744 2
ahci 20381 0
drm_kms_helper 26939 1 i915
uhci_hcd 19093 0
libahci 20639 4 ahci
sdhci_pci 6919 0
libata 168236 2 ahci,libahci
ehci_hcd 32311 0
drm 180695 3 i915,drm_kms_helper
sdhci 15070 1 sdhci_pci
thermal 13320 0
firewire_ohci 19932 0
scsi_mod 183302 5 firewire_sbp2,sg,sd_mod,sr_mod,libata
i2c_algo_bit 4914 1 i915
mmc_core 58857 1 sdhci
firewire_core 44899 2 firewire_sbp2,firewire_ohci
crc_itu_t 1691 1 firewire_core
led_class 3073 1 sdhci
button 5734 1 i915
i2c_core 22507 7 i2c_dev,videodev,i2c_i801,i915,drm_kms_helper,drm, i2c_algo_bit
e1000e 123562 0
usbcore 151756 5 uvcvideo,usbhid,uhci_hcd,ehci_hcd
video 20623 1 i915
nls_base 8021 3 nls_utf8,cifs,usbcore
thermal_sys 14244 3 processor,thermal,video
output 2271 1 video

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ef98 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f6ae0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6adb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at efe0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6adc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0200000-f03fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6900000-f69fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0800000-f09fffff
Prefetchable memory behind bridge: 00000000f0a00000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6600000-f68fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: f6500000-f65fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 45
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6adaf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus

03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f65ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f65ff600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci

03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 11)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 7
Region 0: Memory at f65ff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

0c:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f69fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn


** USB devices:
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse
Bus 001 Device 007: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 001 Device 006: ID 0c45:63f1 Microdia Integrated Webcam
Bus 001 Device 004: ID 413c:2513 Dell Computer Corp.
Bus 001 Device 003: ID 413c:2513 Dell Computer Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.35-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.35-trunk-amd64 depends on:
ii debconf [debconf 1.5.35 Debian configuration management sy
pn initramfs-tools <none> (no description available)
ii linux-base 2.6.35-1~experimental.3 Linux image base package
ii module-init-tool 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.35-trunk-amd64 recommends:
ii firmware-linux-free 2.6.32-23 Binary firmware for various driver

Versions of packages linux-image-2.6.35-trunk-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.35 <none> (no description available)

Versions of packages linux-image-2.6.35-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
* linux-image-2.6.35-trunk-amd64/postinst/missing-firmware-2.6.35-trunk-amd64:
linux-image-2.6.35-trunk-amd64/postinst/depmod-error-initrd-2.6.35-trunk-amd64: false
linux-image-2.6.35-trunk-amd64/prerm/removing-running-kernel-2.6.35-trunk-amd64: true
linux-image-2.6.35-trunk-amd64/postinst/ignoring-do-bootloader-2.6.35-trunk-amd64:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100929122511.25613.39677.reportbug@apollon.madis m.org">http://lists.debian.org/20100929122511.25613.39677.reportbug@apollon.madis m.org
 
Old 09-29-2010, 01:03 PM
Bastian Blank
 
Default Bug#598492: linux-image-2.6.35-trunk-amd64: suspend/hibernate is totally fucked up

severity 598492 important
thanks

On Wed, Sep 29, 2010 at 02:25:11PM +0200, Pierre Habouzit wrote:
> Version: 2.6.35-1~experimental.3

There is a 2.6.36-rc5 based version in experimental now. Does it show
similar symptoms?

> Severity: grave

You should know better.

> With the 2.6.35 kernel, suspend and hibernation result is various kind
> of issues on a random basis at "exit" time, meaning that sometimes the
> suspend/hibernation doesn't put the machine to sleep, but instead I've
> gotten:

Works fine here.

> - kernel errors (for hibernation), though for some reason this wasn't
> logged to /var/log.

You could use a camera to save them.

> In addition to that, for some reason, when I come back from suspend, my
> keyboard mapping in X is lost, which doesn't happen if I boot a .32
> kernel.

Which sort of keyboard mapping? Which Xorg?

> ** Command line:
> BOOT_IMAGE=/vmlinuz-2.6.35-trunk-amd64 root=/dev/mapper/ssd-root ro quiet i915.modeset=1

Why do you set the modeset parameter here?

Bastian

--
I have never understood the female capacity to avoid a direct answer to
any question.
-- Spock, "This Side of Paradise", stardate 3417.3



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100929130321.GA23281@wavehammer.waldi.eu.org">ht tp://lists.debian.org/20100929130321.GA23281@wavehammer.waldi.eu.org
 
Old 09-30-2010, 07:40 AM
Pierre Habouzit
 
Default Bug#598492: linux-image-2.6.35-trunk-amd64: suspend/hibernate is totally fucked up

On Wed, Sep 29, 2010 at 03:03:21PM +0200, Bastian Blank wrote:
> severity 598492 important
> thanks
>
> On Wed, Sep 29, 2010 at 02:25:11PM +0200, Pierre Habouzit wrote:
> > Version: 2.6.35-1~experimental.3
>
> There is a 2.6.36-rc5 based version in experimental now. Does it show
> similar symptoms?

I'll try.

>
> > Severity: grave
>
> You should know better.

really, each time I close the lid of my computer it crashes losing all
my session data, so yeah, I think it's grave. though I couldn't care
less for an experimental version so I won't do a severity-war on that.

> > With the 2.6.35 kernel, suspend and hibernation result is various kind
> > of issues on a random basis at "exit" time, meaning that sometimes the
> > suspend/hibernation doesn't put the machine to sleep, but instead I've
> > gotten:
>
> Works fine here.

*shrug*

> > - kernel errors (for hibernation), though for some reason this wasn't
> > logged to /var/log.
>
> You could use a camera to save them.

Which I hadn't at work when it failed and it's random so…

> > In addition to that, for some reason, when I come back from suspend, my
> > keyboard mapping in X is lost, which doesn't happen if I boot a .32
> > kernel.
>
> Which sort of keyboard mapping? Which Xorg?

setxkbmap one. I have a custome keyboard mapping, and it reverts to
standard 'fr' one on resume for no good reason. The Xorg is just the
unstable default one. which Xorg is probably irelevant as the problem
doesn't happen with a .32

> > ** Command line:
> > BOOT_IMAGE=/vmlinuz-2.6.35-trunk-amd64 root=/dev/mapper/ssd-root ro quiet i915.modeset=1
>
> Why do you set the modeset parameter here?

leftover from the time when it wasn't done in /etc/modprobe.d/ I should
indeed remove it.
--
·O· Pierre Habouzit
··O madcoder@debian.org
OOO http://www.madism.org



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100930074007.GB6752@madism.org">http://lists.debian.org/20100930074007.GB6752@madism.org
 
Old 09-30-2010, 07:45 AM
Pierre Habouzit
 
Default Bug#598492: linux-image-2.6.35-trunk-amd64: suspend/hibernate is totally fucked up

On Thu, Sep 30, 2010 at 09:40:07AM +0200, Pierre Habouzit wrote:
> On Wed, Sep 29, 2010 at 03:03:21PM +0200, Bastian Blank wrote:
> > severity 598492 important
> > thanks
> >
> > On Wed, Sep 29, 2010 at 02:25:11PM +0200, Pierre Habouzit wrote:
> > > Version: 2.6.35-1~experimental.3
> >
> > There is a 2.6.36-rc5 based version in experimental now. Does it show
> > similar symptoms?
>
> I'll try.

I've tried 5-6 suspends, and all of them worked fine for now (whereas 2
over 3 failed with .35). I'll keep trying it for a few more days, and
will mark the bug not-found in the .36 version if it's confirmed.

> > > In addition to that, for some reason, when I come back from suspend, my
> > > keyboard mapping in X is lost, which doesn't happen if I boot a .32
> > > kernel.
> >
> > Which sort of keyboard mapping? Which Xorg?
>
> setxkbmap one. I have a custome keyboard mapping, and it reverts to
> standard 'fr' one on resume for no good reason. The Xorg is just the
> unstable default one. which Xorg is probably irelevant as the problem
> doesn't happen with a .32

This "problem" went away with .36 too, that I'm sure

--
O Pierre Habouzit
O madcoder@debian.org
OOO http://www.madism.org



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100930074505.GA2979@madism.org">http://lists.debian.org/20100930074505.GA2979@madism.org
 
Old 09-30-2010, 12:22 PM
Bastian Blank
 
Default Bug#598492: linux-image-2.6.35-trunk-amd64: suspend/hibernate is totally fucked up

On Thu, Sep 30, 2010 at 09:40:07AM +0200, Pierre Habouzit wrote:
> On Wed, Sep 29, 2010 at 03:03:21PM +0200, Bastian Blank wrote:
> > > Severity: grave
> > You should know better.
> really, each time I close the lid of my computer it crashes losing all
> my session data, so yeah, I think it's grave.

The bug neither makes the package unusable for everyone (or at least a
large amount of system), nor does it cause data loss, nor does it
introduce a security hole. This are all the reasons for grave.

> though I couldn't care
> less for an experimental version so I won't do a severity-war on that.

No, this is the same for every version.

> > > With the 2.6.35 kernel, suspend and hibernation result is various kind
> > > of issues on a random basis at "exit" time, meaning that sometimes the
> > > suspend/hibernation doesn't put the machine to sleep, but instead I've
> > > gotten:
> > Works fine here.
> *shrug*

That is what I mean. Some of us maintainers use our own packages and
therefor see rather fast what is really broken.

> > > - kernel errors (for hibernation), though for some reason this wasn't
> > > logged to /var/log.
> > You could use a camera to save them.
> Which I hadn't at work when it failed and it's random so…

No mobile phone with a camera?

> > > In addition to that, for some reason, when I come back from suspend, my
> > > keyboard mapping in X is lost, which doesn't happen if I boot a .32
> > > kernel.
> > Which sort of keyboard mapping? Which Xorg?
> setxkbmap one. I have a custome keyboard mapping, and it reverts to
> standard 'fr' one on resume for no good reason. The Xorg is just the
> unstable default one. which Xorg is probably irelevant as the problem
> doesn't happen with a .32

That is rather unlikely a bug in the kernel. The kernel does not know
about keyboard mappings or so. However a kernel change may have
triggered a bug similar to the one fixed in xorg-server/2:1.7.7-4.

Bastian

--
Spock: We suffered 23 casualties in that attack, Captain.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100930122249.GA20078@wavehammer.waldi.eu.org">ht tp://lists.debian.org/20100930122249.GA20078@wavehammer.waldi.eu.org
 
Old 09-30-2010, 04:17 PM
Pierre Habouzit
 
Default Bug#598492: linux-image-2.6.35-trunk-amd64: suspend/hibernate is totally fucked up

On Thu, Sep 30, 2010 at 02:22:49PM +0200, Bastian Blank wrote:
> On Thu, Sep 30, 2010 at 09:40:07AM +0200, Pierre Habouzit wrote:
> > On Wed, Sep 29, 2010 at 03:03:21PM +0200, Bastian Blank wrote:
> > > > - kernel errors (for hibernation), though for some reason this wasn't
> > > > logged to /var/log.
> > > You could use a camera to save them.
> > Which I hadn't at work when it failed and it's random so…
>
> No mobile phone with a camera?

No, not during a staff meeting I couldn't leave.

> > > > In addition to that, for some reason, when I come back from suspend, my
> > > > keyboard mapping in X is lost, which doesn't happen if I boot a .32
> > > > kernel.
> > > Which sort of keyboard mapping? Which Xorg?
> > setxkbmap one. I have a custome keyboard mapping, and it reverts to
> > standard 'fr' one on resume for no good reason. The Xorg is just the
> > unstable default one. which Xorg is probably irelevant as the problem
> > doesn't happen with a .32
>
> That is rather unlikely a bug in the kernel. The kernel does not know
> about keyboard mappings or so. However a kernel change may have
> triggered a bug similar to the one fixed in xorg-server/2:1.7.7-4.

Well, it only happens with .35, not with .32, not with .36-rc5, and fwiw
I'm using 1.7.7-7

--
·O· Pierre Habouzit
··O madcoder@debian.org
OOO http://www.madism.org



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100930161731.GB18968@madism.org">http://lists.debian.org/20100930161731.GB18968@madism.org
 
Old 09-30-2010, 07:09 PM
Pierre Habouzit
 
Default Bug#598492: linux-image-2.6.35-trunk-amd64: suspend/hibernate is totally fucked up

fixed 598492 2.6.36~rc5-1~experimental.1
thanks

> > > > > In addition to that, for some reason, when I come back from suspend, my
> > > > > keyboard mapping in X is lost, which doesn't happen if I boot a .32
> > > > > kernel.
> > > > Which sort of keyboard mapping? Which Xorg?
> > > setxkbmap one. I have a custome keyboard mapping, and it reverts to
> > > standard 'fr' one on resume for no good reason. The Xorg is just the
> > > unstable default one. which Xorg is probably irelevant as the problem
> > > doesn't happen with a .32
> >
> > That is rather unlikely a bug in the kernel. The kernel does not know
> > about keyboard mappings or so. However a kernel change may have
> > triggered a bug similar to the one fixed in xorg-server/2:1.7.7-4.
>
> Well, it only happens with .35, not with .32, not with .36-rc5, and fwiw
> I'm using 1.7.7-7

Okay it seems it still happens with .36 so let's say it's an X bug then.
--
O Pierre Habouzit
O madcoder@debian.org
OOO http://www.madism.org



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100930190917.GA21423@madism.org">http://lists.debian.org/20100930190917.GA21423@madism.org
 
Old 09-30-2010, 07:28 PM
Julien Cristau
 
Default Bug#598492: linux-image-2.6.35-trunk-amd64: suspend/hibernate is totally fucked up

On Thu, Sep 30, 2010 at 21:09:17 +0200, Pierre Habouzit wrote:

> Okay it seems it still happens with .36 so let's say it's an X bug then.

It's a separate issue from what you reported initially, and it doesn't
even sound like a bug.

Cheers,
Julien
 
Old 09-30-2010, 07:30 PM
Pierre Habouzit
 
Default Bug#598492: linux-image-2.6.35-trunk-amd64: suspend/hibernate is totally fucked up

On Thu, Sep 30, 2010 at 09:28:27PM +0200, Julien Cristau wrote:
> On Thu, Sep 30, 2010 at 21:09:17 +0200, Pierre Habouzit wrote:
>
> > Okay it seems it still happens with .36 so let's say it's an X bug then.
>
> It's a separate issue from what you reported initially, and it doesn't
> even sound like a bug.

I know it's a separate issue, hence me closing the bug, and it is a bug:
coming back from resume state, the program isn't in the state I left it.

--
O Pierre Habouzit
O madcoder@debian.org
OOO http://www.madism.org



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100930193018.GD21423@madism.org">http://lists.debian.org/20100930193018.GD21423@madism.org
 

Thread Tools




All times are GMT. The time now is 11:02 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org