Bug#597725: linux-image-2.6.32-5-amd64: Errors resuming from suspend after upgrade from .32-3 to .32-5
Package: linux-2.6
Version: 2.6.32-21
Severity: minor
I recently got around to updating a testing laptop to the most recent 2.6.32
kernel, which is debian version 5. After this upgrade I get errors in all my
open consoles whne resuming from suspend. This seems to be cosmetic only,
as I do not see any issues aside from the errors appearing.
Here they are:
Message from syslogd@debtop at Sep 22 09:27:57 ...
kernel:[45254.160231] Uhhuh. NMI received for unknown reason 80 on CPU 0.
Message from syslogd@debtop at Sep 22 09:27:57 ...
kernel:[45254.160232] You have some hardware problem, likely on the PCI bus.
Message from syslogd@debtop at Sep 22 09:27:57 ...
kernel:[45254.160234] Dazed and confused, but trying to continue
And a dmesg snippet around the same time, which does not appear to include errors:
[45250.565472] tg3 0000:09:00.0: PME# enabled
[45250.565502] tg3 0000:09:00.0: wake-up capability enabled by ACPI
[45250.847769] PM: Syncing filesystems ... done.
[45250.895493] PM: Preparing system for mem sleep
[45251.104579] Freezing user space processes ... (elapsed 0.00 seconds) done.
[45251.105294] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[45251.105332] PM: Entering mem sleep
[45251.105345] Suspending console(s) (use no_console_suspend to debug)
[45251.200036] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[45251.200261] sd 0:0:0:0: [sda] Stopping disk
[45252.697723] serial 00:0c: disabled
[45252.712074] [drm] nouveau 0000:01:00.0: Evicting buffers...
[45252.769095] [drm] nouveau 0000:01:00.0: Idling channels...
[45252.769368] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
[45252.995751] [drm] nouveau 0000:01:00.0: And we're gone!
[45252.995789] nouveau 0000:01:00.0: PCI INT A disabled
[45253.008147] ata_piix 0000:00:1f.2: PCI INT B disabled
[45253.024034] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[45253.024041] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[45253.024048] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[45253.024054] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[45253.024060] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[45253.128162] HDA Intel 0000:00:1b.0: PCI INT A disabled
[45253.164041] ACPI: Preparing to enter system sleep state S3
[45253.180008] Disabling non-boot CPUs ...
[45253.180029] CPU0 attaching NULL sched-domain.
[45253.180033] CPU1 attaching NULL sched-domain.
[45253.244023] CPU0 attaching NULL sched-domain.
[45253.348018] CPU 1 is now offline
[45253.348022] SMP alternatives: switching to UP code
[45253.353523] Back to C!
[45253.353523] CPU0: Thermal monitoring enabled (TM2)
[45253.353523] Enabling non-boot CPUs ...
[45253.353523] SMP alternatives: switching to SMP code
[45253.358709] Booting processor 1 APIC 0x1 ip 0x6000
[45253.353144] Initializing CPU#1
[45253.353144] CPU: L1 I cache: 32K, L1 D cache: 32K
[45253.353144] CPU: L2 cache: 4096K
[45253.353144] CPU 1/0x1 -> Node 0
[45253.353144] CPU: Physical Processor ID: 0
[45253.353144] CPU: Processor Core ID: 1
[45253.353144] CPU1: Thermal monitoring enabled (TM2)
[45253.448080] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[45253.448154] CPU0 attaching NULL sched-domain.
[45253.476030] CPU0 attaching sched-domain:
[45253.476033] domain 0: span 0-1 level MC
[45253.476035] groups: 0 1
[45253.476040] CPU1 attaching sched-domain:
[45253.476042] domain 0: span 0-1 level MC
[45253.476044] groups: 1 0
[45253.476642] CPU1 is up
[45253.477222] ACPI: Waking up from system sleep state S3
[45254.043874] pcieport 0000:00:01.0: restoring config space at offset 0xf (was 0x100, writing 0x1a0100)
[45254.043881] pcieport 0000:00:01.0: restoring config space at offset 0xa (was 0xf, writing 0x0)
[45254.043885] pcieport 0000:00:01.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xdff1d001)
[45254.043889] pcieport 0000:00:01.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xefe0ed00)
[45254.043893] pcieport 0000:00:01.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)
[45254.043898] pcieport 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[45254.043902] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100507)
[45254.043930] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[45254.043944] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xffa7c004, writing 0xefffc004)
[45254.043948] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[45254.043954] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102)
[45254.043976] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x20100)
[45254.043985] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8a318a21)
[45254.043990] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x8a108a00)
[45254.043994] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x2020)
[45254.043998] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0b00)
[45254.044011] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[45254.044017] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[45254.044050] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20200)
[45254.044059] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x8a518a41)
[45254.044063] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xecf0ecf0)
[45254.044067] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030)
[45254.044072] pcieport 0000:00:1c.1: restoring config space at offset 0x6 (was 0x0, writing 0xc0c00)
[45254.044078] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[45254.044083] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[45254.044116] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x20300)
[45254.044126] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x8a718a61)
[45254.044130] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xece0ece0)
[45254.044134] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x0, writing 0x4040)
[45254.044139] pcieport 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0x90900)
[45254.044145] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[45254.044150] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[45254.044191] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[45254.044201] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[45254.044212] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0xbf61)
[45254.044222] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[45254.044231] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x309)
[45254.044242] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0xbf41)
[45254.044253] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[45254.044262] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x405)
[45254.044273] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0xbf21)
[45254.044283] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[45254.044315] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[45254.044339] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x100f1, writing 0x83f18001)
[45254.044344] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xf0, writing 0x89f08400)
[45254.044348] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x2280e0f0, writing 0x22805050)
[45254.044352] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20030300, writing 0x20070300)
[45254.044360] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[45254.044395] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107)
[45254.044411] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x203)
[45254.044428] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00005, writing 0x2b80005)
[45254.044439] i801_smbus 0000:00:1f.3: restoring config space at offset 0xf (was 0x200, writing 0x203)
[45254.044462] i801_smbus 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800101)
[45254.044480] nouveau 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x109)
[45254.044492] nouveau 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xee000004)
[45254.044500] nouveau 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
[45254.044506] nouveau 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xed000000)
[45254.044512] nouveau 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[45254.044520] nouveau 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x20100007)
[45254.044602] iwl3945 0000:0c:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
[45254.044661] iwl3945 0000:0c:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xecfff000)
[45254.044673] iwl3945 0000:0c:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[45254.044690] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506)
[45254.044852] tg3 0000:09:00.0: restoring config space at offset 0xc (was 0x0, writing 0xa5200000)
[45254.044869] tg3 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[45254.044876] tg3 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[45254.044906] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xf (was 0x800100, writing 0x58001ff)
[45254.044911] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xe (was 0x1, writing 0x54fd)
[45254.044916] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xd (was 0x1, writing 0x5401)
[45254.044921] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xc (was 0x1, writing 0x50fd)
[45254.044926] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xb (was 0x1, writing 0x5001)
[45254.044931] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xa (was 0x0, writing 0x87fff000)
[45254.044936] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x9 (was 0x0, writing 0x84000000)
[45254.044941] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x8 (was 0x0, writing 0x83fff000)
[45254.044946] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x7 (was 0x0, writing 0x80000000)
[45254.044951] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x6 (was 0x20000000, writing 0xb0070403)
[45254.044957] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x4 (was 0x0, writing 0x88000000)
[45254.044962] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x3 (was 0x24000, writing 0x2a800)
[45254.044968] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x1 (was 0x4100007, writing 0x4100087)
[45254.044989] yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
[45254.044991] yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
[45254.082079] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[45254.082084] HDA Intel 0000:00:1b.0: setting latency timer to 64
[45254.082107] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[45254.082112] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[45254.082133] usb usb2: root hub lost power or was reset
[45254.082160] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[45254.082165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[45254.082184] usb usb3: root hub lost power or was reset
[45254.082200] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[45254.082205] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[45254.082225] usb usb4: root hub lost power or was reset
[45254.082241] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[45254.082246] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[45254.082265] usb usb5: root hub lost power or was reset
[45254.082281] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[45254.082286] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[45254.082307] pci 0000:00:1e.0: setting latency timer to 64
[45254.082315] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[45254.082319] ata_piix 0000:00:1f.2: setting latency timer to 64
[45254.082658] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[45254.082667] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[45254.082673] nouveau 0000:01:00.0: setting latency timer to 64
[45254.082678] [drm] nouveau 0000:01:00.0: POSTing device...
[45254.082685] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF12D
[45254.082770] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF42C
[45254.152230] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF91E
[45254.152281] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFA76
[45254.160148] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFB44
[45254.160153] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[45254.160231] Uhhuh. NMI received for unknown reason 80 on CPU 0.
[45254.160232] You have some hardware problem, likely on the PCI bus.
[45254.160234] Dazed and confused, but trying to continue
[45254.160237] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[45254.176424] [drm] nouveau 0000:01:00.0: Restoring mode...
[45254.176430] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[45254.176433] [drm] nouveau 0000:01:00.0: 0xE4B3: Parsing digital output script table
[45254.176441] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[45254.176444] [drm] nouveau 0000:01:00.0: 0xE514: Parsing digital output script table
[45254.252241] ata2.00: configured for UDMA/33
[45254.328026] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[45254.328029] [drm] nouveau 0000:01:00.0: 0xE4A4: Parsing digital output script table
[45254.328040] [drm] nouveau 0000:01:00.0: 0xE772: Parsing digital output script table
[45254.384780] [drm] nouveau 0000:01:00.0: Restoring CRTC_OWNER to 0.
[45254.390674] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
[45254.390676] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[45254.390680] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[45254.390682] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[45254.410979] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[45254.410981] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[45254.410983] [drm] nouveau 0000:01:00.0: 0xE4B3: Parsing digital output script table
[45254.410990] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[45254.410992] [drm] nouveau 0000:01:00.0: 0xE514: Parsing digital output script table
[45254.560027] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
[45254.560029] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[45254.560031] [drm] nouveau 0000:01:00.0: 0xE4A4: Parsing digital output script table
[45254.560038] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[45254.724075] serial 00:0c: activated
[45255.224038] sd 0:0:0:0: [sda] Starting disk
[45256.092220] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[45256.124247] ata1.00: configured for UDMA/100
[45256.248026] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[45256.697109] usb 2-2.3: reset full speed USB device using uhci_hcd and address 3
[45257.113123] usb 2-2.3.2: reset full speed USB device using uhci_hcd and address 4
[45257.221848] PM: Finishing wakeup.
[45257.221849] Restarting tasks ... done.
[45257.674485] composite sync not supported
[45257.871902] Registered led device: iwl-phy0::radio
[45257.871923] Registered led device: iwl-phy0::assoc
[45257.871999] Registered led device: iwl-phy0::RX
[45257.872035] Registered led device: iwl-phy0::TX
[45257.887747] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[45257.888703] tg3 0000:09:00.0: wake-up capability disabled by ACPI
[45257.888710] tg3 0000:09:00.0: PME# disabled
[45257.888773] tg3 0000:09:00.0: irq 29 for MSI/MSI-X
[45257.937395] ADDRCONF(NETDEV_UP): eth0: link is not ready
[45257.998588] composite sync not supported
[45261.340471] wlan0: direct probe to AP 22:26:18:93:db:96 (try 1)
[45261.343284] wlan0: direct probe responded
[45261.343291] wlan0: authenticate with AP 22:26:18:93:db:96 (try 1)
[45261.345161] wlan0: authenticated
[45261.345191] wlan0: associate with AP 22:26:18:93:db:96 (try 1)
[45261.347398] wlan0: RX AssocResp from 22:26:18:93:db:96 (capab=0x401 status=0 aid=5)
[45261.347404] wlan0: associated
[45261.349483] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[45271.784033] wlan0: no IPv6 routers present
[45305.051714] lo: Disabled Privacy Extensions
[45437.089413] lo: Disabled Privacy Extensions
[45443.828195] CE: hpet increasing min_delta_ns to 33750 nsec
There are a couple bugs similar to this but they all seem to be related to
radeon graphics. This is not the case here. Sorry if it is a duplicate.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-21) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 13:59:41 UTC 2010
** Kernel log:
[45254.044921] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xc (was 0x1, writing 0x50fd)
[45254.044926] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xb (was 0x1, writing 0x5001)
[45254.044931] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xa (was 0x0, writing 0x87fff000)
[45254.044936] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x9 (was 0x0, writing 0x84000000)
[45254.044941] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x8 (was 0x0, writing 0x83fff000)
[45254.044946] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x7 (was 0x0, writing 0x80000000)
[45254.044951] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x6 (was 0x20000000, writing 0xb0070403)
[45254.044957] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x4 (was 0x0, writing 0x88000000)
[45254.044962] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x3 (was 0x24000, writing 0x2a800)
[45254.044968] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x1 (was 0x4100007, writing 0x4100087)
[45254.044989] yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
[45254.044991] yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
[45254.082079] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[45254.082084] HDA Intel 0000:00:1b.0: setting latency timer to 64
[45254.082107] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[45254.082112] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[45254.082133] usb usb2: root hub lost power or was reset
[45254.082160] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[45254.082165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[45254.082184] usb usb3: root hub lost power or was reset
[45254.082200] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[45254.082205] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[45254.082225] usb usb4: root hub lost power or was reset
[45254.082241] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[45254.082246] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[45254.082265] usb usb5: root hub lost power or was reset
[45254.082281] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[45254.082286] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[45254.082307] pci 0000:00:1e.0: setting latency timer to 64
[45254.082315] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[45254.082319] ata_piix 0000:00:1f.2: setting latency timer to 64
[45254.082658] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[45254.082667] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[45254.082673] nouveau 0000:01:00.0: setting latency timer to 64
[45254.082678] [drm] nouveau 0000:01:00.0: POSTing device...
[45254.082685] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF12D
[45254.082770] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF42C
[45254.152230] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF91E
[45254.152281] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFA76
[45254.160148] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFB44
[45254.160153] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[45254.160231] Uhhuh. NMI received for unknown reason 80 on CPU 0.
[45254.160232] You have some hardware problem, likely on the PCI bus.
[45254.160234] Dazed and confused, but trying to continue
[45254.160237] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[45254.176424] [drm] nouveau 0000:01:00.0: Restoring mode...
[45254.176430] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[45254.176433] [drm] nouveau 0000:01:00.0: 0xE4B3: Parsing digital output script table
[45254.176441] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[45254.176444] [drm] nouveau 0000:01:00.0: 0xE514: Parsing digital output script table
[45254.252241] ata2.00: configured for UDMA/33
[45254.328026] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[45254.328029] [drm] nouveau 0000:01:00.0: 0xE4A4: Parsing digital output script table
[45254.328040] [drm] nouveau 0000:01:00.0: 0xE772: Parsing digital output script table
[45254.384780] [drm] nouveau 0000:01:00.0: Restoring CRTC_OWNER to 0.
[45254.390674] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
[45254.390676] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[45254.390680] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[45254.390682] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[45254.410979] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[45254.410981] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[45254.410983] [drm] nouveau 0000:01:00.0: 0xE4B3: Parsing digital output script table
[45254.410990] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[45254.410992] [drm] nouveau 0000:01:00.0: 0xE514: Parsing digital output script table
[45254.560027] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
[45254.560029] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[45254.560031] [drm] nouveau 0000:01:00.0: 0xE4A4: Parsing digital output script table
[45254.560038] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[45254.724075] serial 00:0c: activated
[45255.224038] sd 0:0:0:0: [sda] Starting disk
[45256.092220] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[45256.124247] ata1.00: configured for UDMA/100
[45256.248026] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[45256.697109] usb 2-2.3: reset full speed USB device using uhci_hcd and address 3
[45257.113123] usb 2-2.3.2: reset full speed USB device using uhci_hcd and address 4
[45257.221848] PM: Finishing wakeup.
[45257.221849] Restarting tasks ... done.
[45257.674485] composite sync not supported
[45257.871902] Registered led device: iwl-phy0::radio
[45257.871923] Registered led device: iwl-phy0::assoc
[45257.871999] Registered led device: iwl-phy0::RX
[45257.872035] Registered led device: iwl-phy0::TX
[45257.887747] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[45257.888703] tg3 0000:09:00.0: wake-up capability disabled by ACPI
[45257.888710] tg3 0000:09:00.0: PME# disabled
[45257.888773] tg3 0000:09:00.0: irq 29 for MSI/MSI-X
[45257.937395] ADDRCONF(NETDEV_UP): eth0: link is not ready
[45257.998588] composite sync not supported
[45261.340471] wlan0: direct probe to AP 22:26:18:93:db:96 (try 1)
[45261.343284] wlan0: direct probe responded
[45261.343291] wlan0: authenticate with AP 22:26:18:93:db:96 (try 1)
[45261.345161] wlan0: authenticated
[45261.345191] wlan0: associate with AP 22:26:18:93:db:96 (try 1)
[45261.347398] wlan0: RX AssocResp from 22:26:18:93:db:96 (capab=0x401 status=0 aid=5)
[45261.347404] wlan0: associated
[45261.349483] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[45271.784033] wlan0: no IPv6 routers present
[45305.051714] lo: Disabled Privacy Extensions
[45437.089413] lo: Disabled Privacy Extensions
[45443.828195] CE: hpet increasing min_delta_ns to 33750 nsec
** Model information
sys_vendor: Dell Inc.
product_name: Latitude D620
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A08
board_vendor: Dell Inc.
board_name:
board_version:
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:18:8b:c8:c2:71 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:19:d2:ae:50:bf brd ff:ff:ff:ff:ff:ff
inet 172.17.168.201/16 brd 172.17.255.255 scope global wlan0
inet6 fe80::219:d2ff:feae:50bf/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether c2:1c:91:56:5d:76 brd ff:ff:ff:ff:ff:ff
*** Protocol statistics:
Ip:
466172 total packets received
4 with invalid addresses
0 forwarded
0 incoming packets discarded
466168 incoming packets delivered
339339 requests sent out
68 outgoing packets dropped
78 dropped because of missing route
Icmp:
171 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 83
timeout in transit: 3
echo requests: 80
echo replies: 5
168 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 80
echo request: 8
echo replies: 80
IcmpMsg:
InType0: 5
InType3: 83
InType8: 80
InType11: 3
OutType0: 80
OutType3: 80
OutType8: 8
Tcp:
2354 active connections openings
0 passive connection openings
4 failed connection attempts
102 connection resets received
7 connections established
460487 segments received
333180 segments send out
480 segments retransmited
0 bad segments received.
831 resets sent
Udp:
5432 packets received
80 packets to unknown port received.
0 packet receive errors
5591 packets sent
UdpLite:
TcpExt:
883 TCP sockets finished time wait in fast timer
1 time wait sockets recycled by time stamp
11 packets rejects in established connections because of timestamp
8715 delayed acks sent
Quick ack mode was activated 470 times
72324 packets directly queued to recvmsg prequeue.
70496 bytes directly in process context from backlog
101311867 bytes directly received in process context from prequeue
319843 packet headers predicted
70545 packets header predicted and directly queued to user
4992 acknowledgments not containing data payload received
36273 predicted acknowledgments
2 times recovered from packet loss by selective acknowledgements
5 congestion windows recovered without slow start by DSACK
200 congestion windows recovered without slow start after partial ack
14 timeouts after SACK recovery
2 fast retransmits
7 retransmits in slow start
334 other TCP timeouts
2 times receiver scheduled too late for direct processing
470 DSACKs sent for old packets
275 DSACKs received
147 connections reset due to unexpected data
20 connections reset due to early user close
13 connections aborted due to timeout
TCPDSACKIgnoredOld: 76
TCPDSACKIgnoredNoUndo: 55
TCPSackShiftFallback: 34
IpExt:
InOctets: 586945514
OutOctets: 25220660
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader
Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.2 tools for generating an initramfs
ii linux-base 2.6.32-21 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-21 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-63 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.26 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100922135457.5402.54782.reportbug@debtop.local"> http://lists.debian.org/20100922135457.5402.54782.reportbug@debtop.local