Package: linux-2.6
Version: 2.6.32-21
Severity: normal

connect() function that is hanging because SYNACK is not recieved resends
SYNs only 2 times by default. But net.ipv4.tcp_syn_retries by default is
equal to 5. If net.ipv4.tcp_syn_retries is equal to 6 then connect()
resends SYN 3 times. The function getsockopt(IPPROTO_TCP, TCP_SYNCNT)
returned the same value as net.ipv4.tcp_syn_retries.

-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-21) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 15:39:44 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=e710436e-0f84-4848-9bc7-0b6021edc2f8 ro yes quiet

** Tainted: W (512)
* Taint on warning.

** Kernel log:
[75498.137521] sky2 eth2: Link is down.
[75498.160391] br0: port 1(eth2) entering disabled state
[75499.832642] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[75499.833037] br0: port 1(eth2) entering forwarding state
[75509.917468] sky2 eth2: Link is down.
[75509.928388] br0: port 1(eth2) entering disabled state
[75511.665631] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[75511.666043] br0: port 1(eth2) entering forwarding state
[75514.961507] sky2 eth2: Link is down.
[75514.972395] br0: port 1(eth2) entering disabled state
[75516.642555] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[75516.642952] br0: port 1(eth2) entering forwarding state
[79832.008036] sky2 eth2: Link is down.
[79832.020411] br0: port 1(eth2) entering disabled state
[79835.325751] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[79835.326147] br0: port 1(eth2) entering forwarding state
[79835.754850] sky2 eth2: Link is down.
[79836.340472] br0: port 1(eth2) entering disabled state
[79837.411896] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[79837.412426] br0: port 1(eth2) entering forwarding state
[80045.678841] sky2 eth2: Link is down.
[80045.692443] br0: port 1(eth2) entering disabled state
[80047.511940] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80047.512332] br0: port 1(eth2) entering forwarding state
[80057.456285] sky2 eth2: Link is down.
[80057.464931] br0: port 1(eth2) entering disabled state
[80059.143111] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80059.143538] br0: port 1(eth2) entering forwarding state
[80167.405953] sky2 eth2: Link is down.
[80167.416424] br0: port 1(eth2) entering disabled state
[80169.091461] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80169.091851] br0: port 1(eth2) entering forwarding state
[80198.991249] sky2 eth2: Link is down.
[80199.000936] br0: port 1(eth2) entering disabled state
[80200.929114] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80200.929506] br0: port 1(eth2) entering forwarding state
[80210.761441] sky2 eth2: Link is down.
[80210.772931] br0: port 1(eth2) entering disabled state
[80212.505220] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80212.505612] br0: port 1(eth2) entering forwarding state
[80376.510530] sky2 eth2: Link is down.
[80376.524422] br0: port 1(eth2) entering disabled state
[80378.206144] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80378.206536] br0: port 1(eth2) entering forwarding state
[80408.095830] sky2 eth2: Link is down.
[80408.108987] br0: port 1(eth2) entering disabled state
[80409.731843] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80409.732245] br0: port 1(eth2) entering forwarding state
[80419.855446] sky2 eth2: Link is down.
[80419.868437] br0: port 1(eth2) entering disabled state
[80421.638206] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80421.638597] br0: port 1(eth2) entering forwarding state
[80487.373675] sky2 eth2: Link is down.
[80487.384438] br0: port 1(eth2) entering disabled state
[80489.040318] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80489.040732] br0: port 1(eth2) entering forwarding state
[80518.948878] sky2 eth2: Link is down.
[80518.960925] br0: port 1(eth2) entering disabled state
[80520.859592] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80520.859983] br0: port 1(eth2) entering forwarding state
[80530.721367] sky2 eth2: Link is down.
[80530.732935] br0: port 1(eth2) entering disabled state
[80532.454078] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80532.454485] br0: port 1(eth2) entering forwarding state
[80634.708853] sky2 eth2: Link is down.
[80634.716985] br0: port 1(eth2) entering disabled state
[80636.392888] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80636.393281] br0: port 1(eth2) entering forwarding state
[80666.303817] sky2 eth2: Link is down.
[80666.312939] br0: port 1(eth2) entering disabled state
[80668.120414] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80668.120808] br0: port 1(eth2) entering forwarding state
[80678.086545] sky2 eth2: Link is down.
[80678.096938] br0: port 1(eth2) entering disabled state
[80679.861648] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[80679.862038] br0: port 1(eth2) entering forwarding state
[80998.468855] sky2 eth2: Link is down.
[80998.484449] br0: port 1(eth2) entering disabled state
[81057.995180] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[81057.995575] br0: port 1(eth2) entering forwarding state
[81135.126046] sky2 eth2: Link is down.
[81135.136445] br0: port 1(eth2) entering disabled state
[81136.894742] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[81136.895135] br0: port 1(eth2) entering forwarding state
[81140.633636] sky2 eth2: Link is down.
[81140.644935] br0: port 1(eth2) entering disabled state
[81142.283156] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[81142.283548] br0: port 1(eth2) entering forwarding state
[81143.603064] sky2 eth2: Link is down.
[81143.616462] br0: port 1(eth2) entering disabled state
[81145.401905] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[81145.402295] br0: port 1(eth2) entering forwarding state
[81214.792110] sky2 eth2: Link is down.
[81214.800946] br0: port 1(eth2) entering disabled state
[81217.980064] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[81217.980461] br0: port 1(eth2) entering forwarding state
[81218.397545] sky2 eth2: Link is down.
[81218.988897] br0: port 1(eth2) entering disabled state
[81220.100313] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both
[81220.100705] br0: port 1(eth2) entering forwarding state

** Model information
sys_vendor: System manufacturer
product_name: P5Q Premium
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1306
board_vendor: ASUSTeK Computer INC.
board_name: P5Q Premium
board_version: Rev 1.xx

** Loaded modules:
Module Size Used by
iptable_raw 1867 0
iptable_nat 4299 0
nf_nat 13228 1 iptable_nat
nf_conntrack_ipv4 9753 3 iptable_nat,nf_nat
nf_conntrack 46375 3 iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 1139 1 nf_conntrack_ipv4
iptable_mangle 2817 0
iptable_filter 2258 0
ip_tables 13675 4 iptable_raw,iptable_nat,iptable_mangle,iptable_fil ter
x_tables 12685 2 iptable_nat,ip_tables
des_generic 15475 96
cbc 2507 96
tun 10780 28
autofs4 20677 1
rpcsec_gss_krb5 8164 51
nfsd 253350 13
exportfs 3122 1 nfsd
nfs 239834 3
lockd 57299 2 nfsd,nfs
fscache 29818 1 nfs
nfs_acl 2031 2 nfsd,nfs
auth_rpcgss 33428 7 rpcsec_gss_krb5,nfsd,nfs
sunrpc 160085 29 rpcsec_gss_krb5,nfsd,nfs,lockd,nfs_acl,auth_rpcgss
8021q 17062 0
garp 5050 1 8021q
bridge 39486 0
stp 1440 2 garp,bridge
ext4 288745 1
jbd2 66887 1 ext4
crc16 1319 1 ext4
fuse 49998 1
md_mod 73200 0
kvm_intel 38050 15
kvm 213672 1 kvm_intel
hwmon_vid 1828 0
coretemp 4325 0
pci_stub 1309 0
firewire_sbp2 11418 0
firewire_core 36656 1 firewire_sbp2
crc_itu_t 1307 1 firewire_core
loop 11623 0
radeon 572395 0
ttm 39986 1 radeon
drm_kms_helper 20017 1 radeon
shpchp 26232 0
drm 142199 3 radeon,ttm,drm_kms_helper
pci_hotplug 21203 1 shpchp
i2c_i801 7750 0
i2c_algo_bit 4225 1 radeon
i2c_core 15328 5 radeon,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
parport_pc 18855 0
snd_pcsp 6579 0
parport 27682 1 parport_pc
asus_atk0110 7686 0
evdev 7352 2
snd_pcm 60119 1 snd_pcsp
psmouse 49777 0
snd_timer 15486 1 snd_pcm
processor 30239 0
button 4650 0
snd 45918 3 snd_pcsp,snd_pcm,snd_timer
soundcore 4566 1 snd
snd_page_alloc 6217 1 snd_pcm
serio_raw 3752 0
ext3 106326 2
jbd 36861 1 ext3
mbcache 5050 2 ext4,ext3
sg 18632 0
usbhid 33260 0
sr_mod 12250 0
hid 62809 1 usbhid
cdrom 28631 1 sr_mod
sd_mod 29553 5
crc_t10dif 1276 1 sd_mod
ahci 32310 0
ata_generic 2983 0
uhci_hcd 18521 0
pata_marvell 2629 0
floppy 49087 0
e100 25860 0
skge 33500 0
ata_piix 21124 4
r8169 28877 0
mii 3210 2 e100,r8169
libata 133072 4 ahci,ata_generic,pata_marvell,ata_piix
ehci_hcd 31119 0
scsi_mod 121717 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
sky2 39182 0
thermal 11610 0
thermal_sys 11942 2 processor,thermal
usbcore 121650 5 usbhid,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: c0000000-dfffffff
Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:06.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e29] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: fe000000-fe0fffff
Prefetchable memory behind bridge: 00000000b0000000-00000000b00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 4800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 4880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 4c00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at bffffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00009000-0000cfff
Memory behind bridge: fe300000-fe6fffff
Prefetchable memory behind bridge: 00000000b0100000-00000000b02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fe200000-fe2fffff
Prefetchable memory behind bridge: 00000000b0300000-00000000b04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: fe100000-fe1fffff
Prefetchable memory behind bridge: 00000000b0500000-00000000b06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 4080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 4400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 4480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at bffff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=32
I/O behind bridge: 0000d000-0000efff
Memory behind bridge: fe700000-febfffff
Prefetchable memory behind bridge: 00000000bef00000-00000000beffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 3000 [size=8]
Region 1: I/O ports at 2c00 [size=4]
Region 2: I/O ports at 2880 [size=8]
Region 3: I/O ports at 2800 [size=4]
Region 4: I/O ports at 2480 [size=16]
Region 5: I/O ports at 2400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at bffff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]

00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 4000 [size=8]
Region 1: I/O ports at 3c00 [size=4]
Region 2: I/O ports at 3880 [size=8]
Region 3: I/O ports at 3800 [size=4]
Region 4: I/O ports at 3480 [size=16]
Region 5: I/O ports at 3400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] [1002:5b60] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:0083]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 5000 [size=256]
Region 2: Memory at c0000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at dffc0000 [disabled] [size=128K]
Capabilities: <access denied>

01:00.1 Display controller [0380]: ATI Technologies Inc RV370 [Radeon X300SE] [1002:5b70]
Subsystem: ASUSTeK Computer Inc. Device [1043:0082]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Region 0: Memory at dfff0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 39
Region 0: I/O ports at 6800 [size=256]
Region 2: Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at b0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169

03:00.0 Serial controller [0700]: NetMos Technology PCIe 9901 Multi-I/O Controller [9710:9901] (prog-if 02 [16550])
Subsystem: Device [a000:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 7480 [size=8]
Region 1: Memory at fe1fb000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fe1fa000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial

03:00.1 Serial controller [0700]: NetMos Technology PCIe 9901 Multi-I/O Controller [9710:9901] (prog-if 02 [16550])
Subsystem: Device [a000:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 7800 [size=8]
Region 1: Memory at fe1fd000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fe1fc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial

03:00.2 Parallel controller [0701]: NetMos Technology PCIe 9901 Multi-I/O Controller [9710:9901] (prog-if 03 [IEEE1284])
Subsystem: Device [a000:2000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 19
Region 0: I/O ports at 7c00 [size=8]
Region 1: I/O ports at 7880 [size=4]
Region 2: Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fe1fe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: parport_pc

04:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8212]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 8c00 [size=8]
Region 1: I/O ports at 8880 [size=4]
Region 2: I/O ports at 8800 [size=8]
Region 3: I/O ports at 8480 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at fe2ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell

05:00.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=05, secondary=06, subordinate=0c, sec-latency=0
I/O behind bridge: 00009000-0000cfff
Memory behind bridge: fe300000-fe6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

06:01.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=06, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

06:02.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=06, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fe300000-fe3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

06:03.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=06, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

06:04.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=06, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe500000-fe5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

06:05.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=06, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe600000-fe6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

06:06.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=06, secondary=0c, subordinate=0c, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

08:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at fe3fc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 9800 [size=256]
Expansion ROM at fe3c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2

09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 36
Region 0: Memory at fe4fc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at a800 [size=256]
Expansion ROM at fe4c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2

0a:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 37
Region 0: Memory at fe5fc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at b800 [size=256]
Expansion ROM at fe5c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2

0b:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 38
Region 0: Memory at fe6fc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at c800 [size=256]
Expansion ROM at fe6c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2

0d:00.0 Ethernet controller [0200]: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) [1186:4b01] (rev 11)
Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) [1186:4b01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Expansion ROM at fe700000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge

0d:01.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152 [1011:0024] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Bus: primary=0d, secondary=0e, subordinate=0e, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe800000-febfffff
Prefetchable memory behind bridge: 00000000bef00000-00000000beffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat+ DiscTmrSERREn-
Capabilities: <access denied>

0e:04.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 05)
Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter [8086:10f0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at befff000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at ec00 [size=32]
Region 2: Memory at feb00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at fea00000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: e100

0e:05.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 05)
Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter [8086:10f0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at beffe000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at e880 [size=32]
Region 2: Memory at fe900000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at fe800000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: e100


** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 06da:0003 Phoenixtec Power Co., Ltd
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (900, 'testing')
Architecture: i386 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.2 tools for generating an initramfs
ii linux-base 2.6.32-21 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-21 Binary firmware for various driver
ii libc6-i686 2.11.2-5 Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-63 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.26 Binary firmware for various driver
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100916111008.31246.88247.reportbug@ori.oktetlabs .ru">http://lists.debian.org/20100916111008.31246.88247.reportbug@ori.oktetlabs .ru