FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 09-15-2010, 01:09 PM
maximilian attems
 
Default Bug#596961: missing radeon firmware (from firmware-linux-nonfree) in initramfs

On Wed, Sep 15, 2010 at 02:59:33PM +0200, Anarky wrote:
> Le mercredi 15 septembre 2010 14:07:18, maximilian attems a écrit :
> > On Wed, Sep 15, 2010 at 01:50:08PM +0200, Anarky wrote:
> > > Package: initramfs-tools
> > > Version: 0.98.3
> > > Severity: normal
> > >
> > > --- Please enter the report below this line. ---
> > >
> > > The radeon driver seems to be loaded at initramfs stage for KMS reasons
> > > but the firmware is not present in the initramfs resulting in missing
> > > functionalities (HDMI audio).
> > > Other people on #debian IRC with a similar setup seem to have these
> > > firmware in the initramfs ...
> >
> > why?
> >
> > there is no valid point to load it in initramfs, just don't do it.
>
> I didn't change anything in that purpose.

please post the following file:
cat /etc/initramfs-tools/modules

> It is seems that with Kernel Mode Settings, the radeon driver must be loaded
> for the framebuffer console to be activated and that it has to be done before X
> is started in order not to get a broken X.
> I'm no expert in that regard, but it seems to be the default debian bahavior
> anyway, so if you really think that's not a "initramfs-utils" bug maybe you
> can reassign it to the radeon maintainer.

what are you talking about?
the radeon linux-2.6 module should not be loaded in initramfs
unless you know what you are doing, empty your
/etc/initramfs-tools/modules if it is in there and regenerate
update-initramfs.


currently you have brought zero evidence of a bug,
even the dmesg snippet just looks fine.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100915130909.GM19138@baikonur.stro.at">http://lists.debian.org/20100915130909.GM19138@baikonur.stro.at
 
Old 09-15-2010, 03:25 PM
Anarky
 
Default Bug#596961: missing radeon firmware (from firmware-linux-nonfree) in initramfs

on the 15th of September 2010, 15:09:09, maximilian attems wrote :
> > > [...]
> > >
> > > there is no valid point to load it in initramfs, just don't do it.
> >
> > I didn't change anything in that purpose.
>
> please post the following file:
> cat /etc/initramfs-tools/modules

It is actually empty (or more exactly completely commented) :
% cat /etc/initramfs-tools/modules
[17:15]
# List of modules that you want to include in your initramfs.
#
# Syntax: module_name [args ...]
#
# You must run update-initramfs(8) to effect this change.
#
# Examples:
#
# raid1
# sd_mod

> > It is seems that with Kernel Mode Settings, the radeon driver must be
> > loaded for the framebuffer console to be activated and that it has to be
> > done before X is started in order not to get a broken X.
> > I'm no expert in that regard, but it seems to be the default debian
> > bahavior anyway, so if you really think that's not a "initramfs-utils"
> > bug maybe you can reassign it to the radeon maintainer.
>
> what are you talking about?
> the radeon linux-2.6 module should not be loaded in initramfs
> unless you know what you are doing, empty your
> /etc/initramfs-tools/modules if it is in there and regenerate
> update-initramfs.
>
> currently you have brought zero evidence of a bug,
> even the dmesg snippet just looks fine.

In that case, it might just be an error from my part.
I am trying to get HDMI audio to work and while doing that, people helping me
on IRC told me that these two lines mean that the problem comes from missing
firmware.
I checked and the fact is that I have the firmware on my filesystem, however it
seems that the radeon driver is loaded early so as to get KMS working
correctly and therefore I looked at initramfs.
Comparing my initramfs with the one of someone with a similar setting (radeon
driver / debian sid / update-initramfs generated initramfs) has shown one main
difference: he has the radeon firmware in his initramfs and I don't.
so I assumed this might be the reason for the problem.

I'm sorry if I'm mistaken and wasting your time. Could you provide me some
test that I could run to check for sure that the driver is loaded after the
root FS has been mounted.

Thank you
 
Old 09-15-2010, 03:28 PM
maximilian attems
 
Default Bug#596961: missing radeon firmware (from firmware-linux-nonfree) in initramfs

reassign 596961 linux-2.6
stop

On Wed, Sep 15, 2010 at 05:25:14PM +0200, Anarky wrote:
>
> In that case, it might just be an error from my part.
> I am trying to get HDMI audio to work and while doing that, people helping me
> on IRC told me that these two lines mean that the problem comes from missing
> firmware.

well it be cool to get such info upfront.

did you try 2.6.35 from experimental?
it installs just fine in squeeze.

also your bug report is lacking info that would have been sent
if you would have reported it upfront against linux-2.6,
please send in:

* dmesg
* lspci
* lspci -vvv






--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100915152854.GN19138@baikonur.stro.at">http://lists.debian.org/20100915152854.GN19138@baikonur.stro.at
 
Old 09-15-2010, 03:38 PM
Julien Cristau
 
Default Bug#596961: missing radeon firmware (from firmware-linux-nonfree) in initramfs

On Wed, Sep 15, 2010 at 17:25:14 +0200, Anarky wrote:

> I'm sorry if I'm mistaken and wasting your time. Could you provide me some
> test that I could run to check for sure that the driver is loaded after the
> root FS has been mounted.
>
zcat /boot/initrd.img-`uname -r` | cpio -t | grep drm

This should be empty.

Cheers,
Julien
 
Old 09-15-2010, 08:59 PM
maximilian attems
 
Default Bug#596961: missing radeon firmware (from firmware-linux-nonfree) in initramfs

On Wed, Sep 15, 2010 at 11:03:02PM +0200, Anarky wrote:
> The 15th of September 2010 17:28:54, maximilian attems wrote:
> > reassign 596961 linux-2.6
> > stop
> >
> > On Wed, Sep 15, 2010 at 05:25:14PM +0200, Anarky wrote:
> > > In that case, it might just be an error from my part.
> > > I am trying to get HDMI audio to work and while doing that, people
> > > helping me on IRC told me that these two lines mean that the problem
> > > comes from missing firmware.
> >
> > well it be cool to get such info upfront.
>
> Sorry, but it's always difficult to draw the line between missing important
> information and too much unrelated information. Especially when you are
> mistaken about the importance of a given bit of information.
>
> > did you try 2.6.35 from experimental?
> > it installs just fine in squeeze.
> >
> > also your bug report is lacking info that would have been sent
> > if you would have reported it upfront against linux-2.6,
> > please send in:
> >
> > * dmesg
> > * lspci
> > * lspci -vvv
>
> I'm using sid and I rebooted many times on multiple kernels from 2.6.32 to
> 2.6.35 all from debian repositories.
>
> Anyway I ran the command stated above and got nothing, so I guess you can
> close this bug as invalid.
>
> This time I booted on 2.6.35-trunk-amd64 from experimental and you'll find the
> info requested in the attachment if you're still interested.

thanks afair your issue is only fixed in 2.6.36-rcX, which we
will soon provide.

sorry to be so short but on the run atm.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100915205909.GP19138@baikonur.stro.at">http://lists.debian.org/20100915205909.GP19138@baikonur.stro.at
 
Old 09-15-2010, 09:03 PM
Anarky
 
Default Bug#596961: missing radeon firmware (from firmware-linux-nonfree) in initramfs

The 15th of September 2010 17:28:54, maximilian attems wrote:
> reassign 596961 linux-2.6
> stop
>
> On Wed, Sep 15, 2010 at 05:25:14PM +0200, Anarky wrote:
> > In that case, it might just be an error from my part.
> > I am trying to get HDMI audio to work and while doing that, people
> > helping me on IRC told me that these two lines mean that the problem
> > comes from missing firmware.
>
> well it be cool to get such info upfront.

Sorry, but it's always difficult to draw the line between missing important
information and too much unrelated information. Especially when you are
mistaken about the importance of a given bit of information.

> did you try 2.6.35 from experimental?
> it installs just fine in squeeze.
>
> also your bug report is lacking info that would have been sent
> if you would have reported it upfront against linux-2.6,
> please send in:
>
> * dmesg
> * lspci
> * lspci -vvv

I'm using sid and I rebooted many times on multiple kernels from 2.6.32 to
2.6.35 all from debian repositories.

Anyway I ran the command stated above and got nothing, so I guess you can
close this bug as invalid.

This time I booted on 2.6.35-trunk-amd64 from experimental and you'll find the
info requested in the attachment if you're still interested.

Regards,
00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller (rev 01)
00:06.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870
01:00.1 Audio device: ATI Technologies Inc Radeon HD 3870 Audio device
03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:00.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
06:00.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
06:00.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
06:01.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller (rev 01)
Subsystem: Giga-byte Technology Device 5000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: x38_edac

00:06.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d500 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d100 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device 5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ed305000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
Subsystem: Giga-byte Technology Device a022
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at ed300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: ed400000-ed5fffff
Prefetchable memory behind bridge: 00000000ed600000-00000000ed7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: ed000000-ed0fffff
Prefetchable memory behind bridge: 00000000ed800000-00000000ed9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e6000000-e6ffffff
Prefetchable memory behind bridge: 00000000ed200000-00000000ed2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: e7000000-e7ffffff
Prefetchable memory behind bridge: 00000000ed100000-00000000ed1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d200 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d300 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device 5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ed304000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e8000000-ecffffff
Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
Subsystem: Giga-byte Technology Device 5001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology Device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d600 [size=8]
Region 1: I/O ports at d700 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d900 [size=4]
Region 4: I/O ports at da00 [size=16]
Region 5: I/O ports at db00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
Subsystem: Giga-byte Technology Device 5001
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ed306000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus

00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at dd00 [size=8]
Region 1: I/O ports at de00 [size=4]
Region 2: I/O ports at df00 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at e100 [size=16]
Region 5: I/O ports at e200 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870 (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Sapphire Radeon HD 3870 PCIe 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at e5000000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 8000 [size=256]
[virtual] Expansion ROM at e4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon

01:00.1 Audio device: ATI Technologies Inc Radeon HD 3870 Audio device
Subsystem: PC Partner Limited Device aa18
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 48
Region 0: Memory at e5010000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at ed000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci

03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 9100 [size=4]
Region 2: I/O ports at 9200 [size=8]
Region 3: I/O ports at 9300 [size=4]
Region 4: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at a000 [size=256]
Region 2: Memory at ed210000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at ed200000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at ed220000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169

05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 46
Region 0: I/O ports at b000 [size=256]
Region 2: Memory at ed110000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at ed100000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at ed120000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169

06:00.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800

06:00.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-T DVB-T Model 909
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e9000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88-mpeg driver manager

06:00.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-T DVB-T Model 909
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 12
Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>

06:01.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at c000 [size=128]
Region 1: Memory at ec005000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at cff00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x

06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at ec004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ec000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-trunk-amd64 (Debian 2.6.35-1~experimental.3) (maks@debian.org) (gcc version 4.4.5 20100902 (prerelease) (Debian 4.4.4-13) ) #1 SMP Mon Sep 6 15:15:26 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.35-trunk-amd64 root=UUID=78966ba0-a9a6-4743-86bf-a8d922cc33c7 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 130000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f5470] f5470
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000
[ 0.000000] RAMDISK: 37593000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f6e60 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee3180 04C2E (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: HPET 00000000cfee7f00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee7f80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cfee7e00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cfee8000 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000cfee8490 00324 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] bootmap [0000000100005000 - 000000010002afff] pages 26
[ 0.000000] (14/32 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0001000000 - 000189ffa4] TEXT DATA BSS ==> [0001000000 - 000189ffa4]
[ 0.000000] #1 [0037593000 - 0037ff0000] RAMDISK ==> [0037593000 - 0037ff0000]
[ 0.000000] #2 [00018a0000 - 00018a00f6] BRK ==> [00018a0000 - 00018a00f6]
[ 0.000000] #3 [00000f5480 - 0000100000] BIOS reserved ==> [00000f5480 - 0000100000]
[ 0.000000] #4 [00000f5470 - 00000f5480] MP-table mpf ==> [00000f5470 - 00000f5480]
[ 0.000000] #5 [000009f800 - 00000f0d00] BIOS reserved ==> [000009f800 - 00000f0d00]
[ 0.000000] #6 [00000f0ecc - 00000f5470] BIOS reserved ==> [00000f0ecc - 00000f5470]
[ 0.000000] #7 [00000f0d00 - 00000f0ecc] MP-table mpc ==> [00000f0d00 - 00000f0ecc]
[ 0.000000] #8 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
[ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
[ 0.000000] #10 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #11 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
[ 0.000000] #12 [0100000000 - 0100005000] NODE_DATA ==> [0100000000 - 0100005000]
[ 0.000000] #13 [0100005000 - 010002b000] BOOTMAP ==> [0100005000 - 010002b000]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880100600000-ffff880103ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048190
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 106 pages reserved
[ 0.000000] DMA zone: 3836 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001a00000 s90240 r8192 d24448 u524288
[ 0.000000] pcpu-alloc: s90240 r8192 d24448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031060
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.35-trunk-amd64 root=UUID=78966ba0-a9a6-4743-86bf-a8d922cc33c7 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4047064k/4980736k available (3128k kernel code, 787976k absent, 145696k reserved, 3708k data, 596k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.910 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.82 BogoMIPS (lpj=11999640)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004025] Security Framework initialized
[ 0.004028] SELinux: Disabled at boot.
[ 0.004282] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005848] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008506] Mount-cache hash table entries: 256
[ 0.008617] Initializing cgroup subsys ns
[ 0.008620] Initializing cgroup subsys cpuacct
[ 0.008623] Initializing cgroup subsys devices
[ 0.008625] Initializing cgroup subsys freezer
[ 0.008626] Initializing cgroup subsys net_cls
[ 0.008628] Initializing cgroup subsys blkio
[ 0.008653] CPU: Physical Processor ID: 0
[ 0.008654] CPU: Processor Core ID: 0
[ 0.008655] mce: CPU supports 6 MCE banks
[ 0.008661] CPU0: Thermal monitoring enabled (TM2)
[ 0.008664] using mwait in idle threads.
[ 0.008666] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.008672] ... version: 2
[ 0.008673] ... bit width: 40
[ 0.008674] ... generic registers: 2
[ 0.008675] ... value mask: 000000ffffffffff
[ 0.008676] ... max period: 000000007fffffff
[ 0.008677] ... fixed-purpose events: 3
[ 0.008678] ... event mask: 0000000700000003
[ 0.009405] ACPI: Core revision 20100428
[ 0.016061] Setting APIC routing to flat
[ 0.016362] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058240] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.060000] Booting Node 0, Processors #1
[ 0.148012] Brought up 2 CPUs
[ 0.148014] Total of 2 processors activated (11999.04 BogoMIPS).
[ 0.148767] devtmpfs: initialized
[ 0.150328] regulator: core version 0.5
[ 0.150328] NET: Registered protocol family 16
[ 0.150328] ACPI: bus type pci registered
[ 0.150328] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.150328] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.155704] PCI: Using configuration type 1 for base access
[ 0.156016] bio: create slab <bio-0> at 0
[ 0.156526] ACPI: EC: Look up EC in DSDT
[ 0.160441] ACPI: SSDT 00000000cfee8400 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.160582] ACPI: Dynamic OEM Table Load:
[ 0.160585] ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.160628] ACPI: Interpreter enabled
[ 0.160630] ACPI: (supports S0 S3 S4 S5)
[ 0.160645] ACPI: Using IOAPIC for interrupt routing
[ 0.164576] ACPI: No dock devices found.
[ 0.164579] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.164651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.164789] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.164791] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.164793] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.164795] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.164796] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
[ 0.164847] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.164850] pci 0000:00:06.0: PME# disabled
[ 0.164894] pci 0000:00:1a.0: reg 20: [io 0xd500-0xd51f]
[ 0.164944] pci 0000:00:1a.1: reg 20: [io 0xd000-0xd01f]
[ 0.164995] pci 0000:00:1a.2: reg 20: [io 0xd100-0xd11f]
[ 0.165036] pci 0000:00:1a.7: reg 10: [mem 0xed305000-0xed3053ff]
[ 0.165092] pci 0000:00:1b.0: reg 10: [mem 0xed300000-0xed303fff 64bit]
[ 0.165123] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.165125] pci 0000:00:1b.0: PME# disabled
[ 0.165173] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.165176] pci 0000:00:1c.0: PME# disabled
[ 0.165226] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.165229] pci 0000:00:1c.3: PME# disabled
[ 0.165278] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.165280] pci 0000:00:1c.4: PME# disabled
[ 0.165329] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.165332] pci 0000:00:1c.5: PME# disabled
[ 0.165369] pci 0000:00:1d.0: reg 20: [io 0xd200-0xd21f]
[ 0.165419] pci 0000:00:1d.1: reg 20: [io 0xd300-0xd31f]
[ 0.165469] pci 0000:00:1d.2: reg 20: [io 0xd400-0xd41f]
[ 0.165510] pci 0000:00:1d.7: reg 10: [mem 0xed304000-0xed3043ff]
[ 0.165630] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.165633] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.165636] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.165638] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.165676] pci 0000:00:1f.2: reg 10: [io 0xd600-0xd607]
[ 0.165680] pci 0000:00:1f.2: reg 14: [io 0xd700-0xd703]
[ 0.165683] pci 0000:00:1f.2: reg 18: [io 0xd800-0xd807]
[ 0.165687] pci 0000:00:1f.2: reg 1c: [io 0xd900-0xd903]
[ 0.165691] pci 0000:00:1f.2: reg 20: [io 0xda00-0xda0f]
[ 0.165695] pci 0000:00:1f.2: reg 24: [io 0xdb00-0xdb0f]
[ 0.165728] pci 0000:00:1f.3: reg 10: [mem 0xed306000-0xed3060ff 64bit]
[ 0.165738] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.165766] pci 0000:00:1f.5: reg 10: [io 0xdd00-0xdd07]
[ 0.165770] pci 0000:00:1f.5: reg 14: [io 0xde00-0xde03]
[ 0.165774] pci 0000:00:1f.5: reg 18: [io 0xdf00-0xdf07]
[ 0.165778] pci 0000:00:1f.5: reg 1c: [io 0xe000-0xe003]
[ 0.165782] pci 0000:00:1f.5: reg 20: [io 0xe100-0xe10f]
[ 0.165786] pci 0000:00:1f.5: reg 24: [io 0xe200-0xe20f]
[ 0.165838] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.165845] pci 0000:01:00.0: reg 18: [mem 0xe5000000-0xe500ffff 64bit]
[ 0.165849] pci 0000:01:00.0: reg 20: [io 0x8000-0x80ff]
[ 0.165855] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.165869] pci 0000:01:00.0: supports D1 D2
[ 0.165890] pci 0000:01:00.1: reg 10: [mem 0xe5010000-0xe5013fff 64bit]
[ 0.165916] pci 0000:01:00.1: supports D1 D2
[ 0.165939] pci 0000:00:06.0: PCI bridge to [bus 01-01]
[ 0.165941] pci 0000:00:06.0: bridge window [io 0x8000-0x8fff]
[ 0.165943] pci 0000:00:06.0: bridge window [mem 0xe4000000-0xe5ffffff]
[ 0.165946] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.165977] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.165980] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
[ 0.165983] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.165987] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.166080] pci 0000:03:00.0: reg 24: [mem 0xed000000-0xed001fff]
[ 0.166113] pci 0000:03:00.0: PME# supported from D3hot
[ 0.166117] pci 0000:03:00.0: PME# disabled
[ 0.166156] pci 0000:03:00.1: reg 10: [io 0x9000-0x9007]
[ 0.166164] pci 0000:03:00.1: reg 14: [io 0x9100-0x9103]
[ 0.166171] pci 0000:03:00.1: reg 18: [io 0x9200-0x9207]
[ 0.166178] pci 0000:03:00.1: reg 1c: [io 0x9300-0x9303]
[ 0.166185] pci 0000:03:00.1: reg 20: [io 0x9400-0x940f]
[ 0.166238] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.166249] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.166252] pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
[ 0.166254] pci 0000:00:1c.3: bridge window [mem 0xed000000-0xed0fffff]
[ 0.166259] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.166311] pci 0000:04:00.0: reg 10: [io 0xa000-0xa0ff]
[ 0.166328] pci 0000:04:00.0: reg 18: [mem 0xed210000-0xed210fff 64bit pref]
[ 0.166339] pci 0000:04:00.0: reg 20: [mem 0xed200000-0xed20ffff 64bit pref]
[ 0.166346] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.166378] pci 0000:04:00.0: supports D1 D2
[ 0.166380] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166384] pci 0000:04:00.0: PME# disabled
[ 0.172015] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.172019] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 0.172023] pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
[ 0.172028] pci 0000:00:1c.4: bridge window [mem 0xed200000-0xed2fffff 64bit pref]
[ 0.172089] pci 0000:05:00.0: reg 10: [io 0xb000-0xb0ff]
[ 0.172107] pci 0000:05:00.0: reg 18: [mem 0xed110000-0xed110fff 64bit pref]
[ 0.172124] pci 0000:05:00.0: reg 20: [mem 0xed100000-0xed10ffff 64bit pref]
[ 0.172131] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.172164] pci 0000:05:00.0: supports D1 D2
[ 0.172165] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172169] pci 0000:05:00.0: PME# disabled
[ 0.180013] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.180016] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.180020] pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
[ 0.180025] pci 0000:00:1c.5: bridge window [mem 0xed100000-0xed1fffff 64bit pref]
[ 0.180068] pci 0000:06:00.0: reg 10: [mem 0xe8000000-0xe8ffffff]
[ 0.180139] pci 0000:06:00.2: reg 10: [mem 0xe9000000-0xe9ffffff]
[ 0.180196] pci 0000:06:00.4: reg 10: [mem 0xea000000-0xeaffffff]
[ 0.180255] pci 0000:06:01.0: reg 10: [io 0xc000-0xc07f]
[ 0.180260] pci 0000:06:01.0: reg 14: [mem 0xec005000-0xec00507f]
[ 0.180280] pci 0000:06:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.180294] pci 0000:06:01.0: supports D1 D2
[ 0.180295] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180299] pci 0000:06:01.0: PME# disabled
[ 0.180326] pci 0000:06:06.0: reg 10: [mem 0xec004000-0xec0047ff]
[ 0.180331] pci 0000:06:06.0: reg 14: [mem 0xec000000-0xec003fff]
[ 0.180366] pci 0000:06:06.0: supports D1 D2
[ 0.180367] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.180370] pci 0000:06:06.0: PME# disabled
[ 0.180400] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.180403] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.180406] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xecffffff]
[ 0.180410] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.180412] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.180414] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.180415] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.180417] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.180419] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[ 0.180438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.180544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.180585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.180631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.180669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.180705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.193531] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.193600] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.193666] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.193731] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.193797] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.193862] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.193927] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.193992] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.194022] HEST: Table is not found!
[ 0.194069] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.194075] vgaarb: loaded
[ 0.194085] PCI: Using ACPI for IRQ routing
[ 0.194085] PCI: pci_cache_line_size set to 64 bytes
[ 0.194085] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.194085] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
[ 0.194085] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.194085] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.194085] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.200026] Switching to clocksource tsc
[ 0.200827] pnp: PnP ACPI init
[ 0.200832] ACPI: bus type pnp registered
[ 0.202347] pnp: PnP ACPI: found 11 devices
[ 0.202349] ACPI: ACPI bus type pnp unregistered
[ 0.202354] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.202356] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.202358] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.202360] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.202362] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.202366] system 00:07: [io 0x0400-0x04bf] could not be reserved
[ 0.202369] system 00:08: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.202373] system 00:09: [mem 0x000d0800-0x000d3fff] has been reserved
[ 0.202375] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.202377] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.202378] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.202380] system 00:09: [mem 0xcfee0000-0xcfefffff] could not be reserved
[ 0.202382] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.202384] system 00:09: [mem 0x00100000-0xcfedffff] could not be reserved
[ 0.202386] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.202388] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.202390] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.202392] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.202394] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.202396] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.202397] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[ 0.207822] pci 0000:00:1c.0: BAR 14: assigned [mem 0xed400000-0xed5fffff]
[ 0.207825] pci 0000:00:1c.0: BAR 15: assigned [mem 0xed600000-0xed7fffff 64bit pref]
[ 0.207827] pci 0000:00:1c.3: BAR 15: assigned [mem 0xed800000-0xed9fffff 64bit pref]
[ 0.207830] pci 0000:00:1e.0: BAR 15: assigned [mem 0xcff00000-0xcfffffff pref]
[ 0.207832] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4000000-0xe401ffff pref]
[ 0.207834] pci 0000:00:06.0: PCI bridge to [bus 01-01]
[ 0.207836] pci 0000:00:06.0: bridge window [io 0x8000-0x8fff]
[ 0.207838] pci 0000:00:06.0: bridge window [mem 0xe4000000-0xe5ffffff]
[ 0.207841] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.207843] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.207846] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
[ 0.207849] pci 0000:00:1c.0: bridge window [mem 0xed400000-0xed5fffff]
[ 0.207852] pci 0000:00:1c.0: bridge window [mem 0xed600000-0xed7fffff 64bit pref]
[ 0.207856] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.207858] pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
[ 0.207862] pci 0000:00:1c.3: bridge window [mem 0xed000000-0xed0fffff]
[ 0.207865] pci 0000:00:1c.3: bridge window [mem 0xed800000-0xed9fffff 64bit pref]
[ 0.207870] pci 0000:04:00.0: BAR 6: assigned [mem 0xed220000-0xed22ffff pref]
[ 0.207871] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.207873] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 0.207882] pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
[ 0.207885] pci 0000:00:1c.4: bridge window [mem 0xed200000-0xed2fffff 64bit pref]
[ 0.207890] pci 0000:05:00.0: BAR 6: assigned [mem 0xed120000-0xed12ffff pref]
[ 0.207891] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.207893] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.207897] pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
[ 0.207900] pci 0000:00:1c.5: bridge window [mem 0xed100000-0xed1fffff 64bit pref]
[ 0.207905] pci 0000:06:01.0: BAR 6: assigned [mem 0xcff00000-0xcff1ffff pref]
[ 0.207906] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.207908] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.207912] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xecffffff]
[ 0.207915] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xcfffffff pref]
[ 0.207922] alloc irq_desc for 16 on node -1
[ 0.207923] alloc kstat_irqs on node -1
[ 0.207927] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.207930] pci 0000:00:06.0: setting latency timer to 64
[ 0.207935] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.207938] pci 0000:00:1c.0: setting latency timer to 64
[ 0.207943] alloc irq_desc for 19 on node -1
[ 0.207945] alloc kstat_irqs on node -1
[ 0.207947] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.207950] pci 0000:00:1c.3: setting latency timer to 64
[ 0.207955] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.207958] pci 0000:00:1c.4: setting latency timer to 64
[ 0.207964] alloc irq_desc for 17 on node -1
[ 0.207965] alloc kstat_irqs on node -1
[ 0.207967] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.207970] pci 0000:00:1c.5: setting latency timer to 64
[ 0.207974] pci 0000:00:1e.0: setting latency timer to 64
[ 0.207977] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.207978] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.207980] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.207981] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.207983] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.207984] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
[ 0.207986] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
[ 0.207987] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.207989] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
[ 0.207990] pci_bus 0000:02: resource 1 [mem 0xed400000-0xed5fffff]
[ 0.207992] pci_bus 0000:02: resource 2 [mem 0xed600000-0xed7fffff 64bit pref]
[ 0.207993] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 0.207995] pci_bus 0000:03: resource 1 [mem 0xed000000-0xed0fffff]
[ 0.207996] pci_bus 0000:03: resource 2 [mem 0xed800000-0xed9fffff 64bit pref]
[ 0.207998] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 0.207999] pci_bus 0000:04: resource 1 [mem 0xe6000000-0xe6ffffff]
[ 0.208001] pci_bus 0000:04: resource 2 [mem 0xed200000-0xed2fffff 64bit pref]
[ 0.208002] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.208004] pci_bus 0000:05: resource 1 [mem 0xe7000000-0xe7ffffff]
[ 0.208005] pci_bus 0000:05: resource 2 [mem 0xed100000-0xed1fffff 64bit pref]
[ 0.208007] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.208008] pci_bus 0000:06: resource 1 [mem 0xe8000000-0xecffffff]
[ 0.208010] pci_bus 0000:06: resource 2 [mem 0xcff00000-0xcfffffff pref]
[ 0.208011] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.208012] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.208014] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.208015] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.208017] pci_bus 0000:06: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.208037] NET: Registered protocol family 2
[ 0.208132] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.208852] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.211121] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.211489] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.211491] TCP reno registered
[ 0.211499] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.211529] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.211641] NET: Registered protocol family 1
[ 0.211790] pci 0000:01:00.0: Boot video device
[ 0.211811] PCI: CLS 32 bytes, default 64
[ 0.211856] Unpacking initramfs...
[ 0.393484] Freeing initrd memory: 10612k freed
[ 0.396408] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.396411] Placing 64MB software IO TLB between ffff880001b9e000 - ffff880005b9e000
[ 0.396413] software IO TLB at phys 0x1b9e000 - 0x5b9e000
[ 0.396712] audit: initializing netlink socket (disabled)
[ 0.396723] type=2000 audit(1284590864.392:1): initialized
[ 0.408373] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.409337] VFS: Disk quotas dquot_6.5.2
[ 0.409376] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.409438] msgmni has been set to 7925
[ 0.409565] alg: No test for stdrng (krng)
[ 0.409602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.409605] io scheduler noop registered
[ 0.409606] io scheduler deadline registered
[ 0.409630] io scheduler cfq registered (default)
[ 0.409699] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.409715] alloc irq_desc for 40 on node -1
[ 0.409716] alloc kstat_irqs on node -1
[ 0.409725] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
[ 0.409764] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.409787] alloc irq_desc for 41 on node -1
[ 0.409788] alloc kstat_irqs on node -1
[ 0.409793] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.409846] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.409868] alloc irq_desc for 42 on node -1
[ 0.409869] alloc kstat_irqs on node -1
[ 0.409874] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.409927] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.409949] alloc irq_desc for 43 on node -1
[ 0.409950] alloc kstat_irqs on node -1
[ 0.409955] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.410012] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.410034] alloc irq_desc for 44 on node -1
[ 0.410035] alloc kstat_irqs on node -1
[ 0.410040] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.410156] ERST: Table is not found!
[ 0.410317] Linux agpgart interface v0.103
[ 0.410361] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.410611] PNP: No PS/2 controller found. Probing ports directly.
[ 0.444162] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.444164] If AUX port is really absent please use the 'i8042.noaux' option.
[ 0.695921] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.695972] mice: PS/2 mouse device common for all mice
[ 0.695999] rtc_cmos 00:04: RTC can wake from S4
[ 0.696022] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.696044] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.696052] cpuidle: using governor ladder
[ 0.696053] cpuidle: using governor menu
[ 0.696056] No iBFT detected.
[ 0.696208] TCP cubic registered
[ 0.696285] NET: Registered protocol family 10
[ 0.696549] lo: Disabled Privacy Extensions
[ 0.696681] Mobile IPv6
[ 0.696683] NET: Registered protocol family 17
[ 0.696740] PM: Resume from disk failed.
[ 0.696746] registered taskstats version 1
[ 0.697065] rtc_cmos 00:04: setting system clock to 2010-09-15 22:47:48 UTC (1284590868)
[ 0.697087] Initalizing network drop monitor service
[ 0.697124] Freeing unused kernel memory: 596k freed
[ 0.697272] Write protecting the kernel read-only data: 6144k
[ 0.697385] Freeing unused kernel memory: 948k freed
[ 0.697669] Freeing unused kernel memory: 372k freed
[ 0.706735] udev: starting version 161
[ 0.792637] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.792659] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.792703] r8169 0000:04:00.0: setting latency timer to 64
[ 0.792741] alloc irq_desc for 45 on node -1
[ 0.792743] alloc kstat_irqs on node -1
[ 0.792755] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[ 0.793085] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc9000067c000, 00:1d:7d:09:8e:e8, XID 1c2000c0 IRQ 45
[ 0.817538] alloc irq_desc for 18 on node -1
[ 0.817541] alloc kstat_irqs on node -1
[ 0.817549] firewire_ohci 0000:06:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.820879] usbcore: registered new interface driver usbfs
[ 0.820968] usbcore: registered new interface driver hub
[ 0.820990] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.821006] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.821045] r8169 0000:05:00.0: setting latency timer to 64
[ 0.821081] alloc irq_desc for 46 on node -1
[ 0.821082] alloc kstat_irqs on node -1
[ 0.821093] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
[ 0.821482] r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xffffc9000065e000, 00:1d:7d:09:8e:e6, XID 1c2000c0 IRQ 46
[ 0.835108] usbcore: registered new device driver usb
[ 0.841783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.841807] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.841847] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.841850] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.841863] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.841972] SCSI subsystem initialized
[ 0.845767] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.857675] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xed305000
[ 0.864019] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.868391] libata version 3.00 loaded.
[ 0.871860] firewire_ohci: Added fw-ohci device 0000:06:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 0.871947] 3c59x 0000:06:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.871973] 3c59x: Donald Becker and others.
[ 0.871977] 0000:06:01.0: 3Com PCI 3c905C Tornado at ffffc9000066c000.
[ 0.876660] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.876665] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.876686] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.877067] scsi0 : pata_jmicron
[ 0.877117] scsi1 : pata_jmicron
[ 0.877616] ata1: PATA max UDMA/100 cmd 0x9000 ctl 0x9100 bmdma 0x9400 irq 16
[ 0.877618] ata2: PATA max UDMA/100 cmd 0x9200 ctl 0x9300 bmdma 0x9408 irq 16
[ 0.877638] ahci 0000:03:00.0: version 3.0
[ 0.877648] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.877823] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.877840] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.877842] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.877843] usb usb1: Product: EHCI Host Controller
[ 0.877844] usb usb1: Manufacturer: Linux 2.6.35-trunk-amd64 ehci_hcd
[ 0.877846] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.877920] hub 1-0:1.0: USB hub found
[ 0.877923] hub 1-0:1.0: 6 ports detected
[ 0.877978] alloc irq_desc for 23 on node -1
[ 0.877980] alloc kstat_irqs on node -1
[ 0.877985] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.877993] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.877995] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.878001] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.881897] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.881906] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xed304000
[ 0.891910] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.891913] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.891917] ahci 0000:03:00.0: setting latency timer to 64
[ 0.892019] scsi2 : ahci
[ 0.892084] scsi3 : ahci
[ 0.892144] ata3: SATA max UDMA/133 abar m8192@0xed000000 port 0xed000100 irq 19
[ 0.892148] ata4: SATA max UDMA/133 abar m8192@0xed000000 port 0xed000180 irq 19
[ 0.892727] ------------[ cut here ]------------
[ 0.892733] WARNING: at /build/mattems-linux-2.6_2.6.35-1~experimental.3-amd64-XReacf/linux-2.6-2.6.35/debian/build/source_amd64_none/lib/iomap.c:43 window_set+0x2d/0x37 [3c59x]()
[ 0.892735] Hardware name: EX38-DS4
[ 0.892736] Bad IO access at port 0xd (outw(val,port))
[ 0.892763] Modules linked in: ahci pata_jmicron libahci ata_piix(+) uhci_hcd(+) libata ehci_hcd(+) firewire_ohci firewire_core 3c59x(+) crc_itu_t thermal usbcore r8169 scsi_mod thermal_sys mii nls_base
[ 0.892772] Pid: 194, comm: modprobe Not tainted 2.6.35-trunk-amd64 #1
[ 0.892773] Call Trace:
[ 0.892779] [<ffffffff81044307>] ? warn_slowpath_common+0x78/0x8c
[ 0.892781] [<ffffffff810443ba>] ? warn_slowpath_fmt+0x45/0x4a
[ 0.892785] [<ffffffff8100938e>] ? apic_timer_interrupt+0xe/0x20
[ 0.892788] [<ffffffffa043c08a>] ? window_set+0x2d/0x37 [3c59x]
[ 0.892792] [<ffffffffa043c199>] ? window_write16+0x37/0x60 [3c59x]
[ 0.892794] [<ffffffff8100efb5>] ? native_read_tsc+0x2/0x11
[ 0.892798] [<ffffffffa043db8c>] ? T.921+0x27/0x59 [3c59x]
[ 0.892801] [<ffffffffa043ff4d>] ? vortex_probe1+0xa15/0xd09 [3c59x]
[ 0.892805] [<ffffffffa04402e7>] ? vortex_init_one+0xa6/0xcb [3c59x]
[ 0.892808] [<ffffffff811885b9>] ? kobject_get+0x12/0x17
[ 0.892812] [<ffffffff8119d811>] ? local_pci_probe+0x12/0x16
[ 0.892814] [<ffffffff8119e600>] ? pci_device_probe+0xc2/0xef
[ 0.892818] [<ffffffff81223946>] ? driver_sysfs_add+0x42/0x69
[ 0.892820] [<ffffffff81223a87>] ? driver_probe_device+0xa8/0x138
[ 0.892822] [<ffffffff81223b66>] ? __driver_attach+0x4f/0x6f
[ 0.892824] [<ffffffff81223b17>] ? __driver_attach+0x0/0x6f
[ 0.892826] [<ffffffff81223134>] ? bus_for_each_dev+0x44/0x78
[ 0.892828] [<ffffffff8122358c>] ? bus_add_driver+0xa8/0x1f0
[ 0.892831] [<ffffffff81223e0d>] ? driver_register+0x90/0xf8
[ 0.892833] [<ffffffff8119e84a>] ? __pci_register_driver+0x4e/0xbe
[ 0.892836] [<ffffffffa0447000>] ? vortex_init+0x0/0xae [3c59x]
[ 0.892839] [<ffffffffa0447024>] ? vortex_init+0x24/0xae [3c59x]
[ 0.892842] [<ffffffffa0447000>] ? vortex_init+0x0/0xae [3c59x]
[ 0.892845] [<ffffffff81002064>] ? do_one_initcall+0x63/0x175
[ 0.892849] [<ffffffff81070e75>] ? sys_init_module+0x97/0x1d6
[ 0.892851] [<ffffffff810089c2>] ? system_call_fastpath+0x16/0x1b
[ 0.892853] ---[ end trace dbb0126e379c12d6 ]---
[ 0.892855] ------------[ cut here ]------------
[ 0.892858] WARNING: at /build/mattems-linux-2.6_2.6.35-1~experimental.3-amd64-XReacf/linux-2.6-2.6.35/debian/build/source_amd64_none/lib/iomap.c:43
 
Old 09-15-2010, 09:16 PM
Anarky
 
Default Bug#596961: missing radeon firmware (from firmware-linux-nonfree) in initramfs

The 15th of September 2010 22:59:09, maximilian attems wrote:
> [...]
>
> thanks afair your issue is only fixed in 2.6.36-rcX, which we
> will soon provide.
>
> sorry to be so short but on the run atm.

No problem and thank you for the information !

Regards,
 

Thread Tools




All times are GMT. The time now is 07:21 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org