Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#590480: linux-image-2.6.32-5-amd64: webcam does not work with gspca driver (http://www.linux-archive.org/debian-kernel/404333-bug-590480-linux-image-2-6-32-5-amd64-webcam-does-not-work-gspca-driver.html)

Marco Bajo 07-26-2010 04:16 PM

Bug#590480: linux-image-2.6.32-5-amd64: webcam does not work with gspca driver
 
Package: linux-2.6
Version: 2.6.32-15
Severity: important

Webcam worked before the dist-upgrade from Lenny (with drivers found at:
http://mxhaard.free.fr/download.html).
Now the drivers are loaded but webcam does not work.

lsmod | grep gspca :
gspca_vc032x 21444 0
gspca_main 18727 1 gspca_vc032x
videodev 29993 1 gspca_main
usbcore 121959 6 gspca_vc032x,gspca_main,btusb,uhci_hcd,ehci_hcd



-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=b6b0606a-326b-4bfb-a795-36d2a2c40c5b ro acpi_enforce_resources=lax quiet

** Tainted: P (1)
* Proprietary module has been loaded.

** Kernel log:
[ 9.403193] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.461272] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 9.542581] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 10.694073] Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k
[ 11.286988] loop: module loaded
[ 11.760512] REISERFS (device sda4): found reiserfs format "3.6" with standard journal
[ 11.760559] REISERFS (device sda4): using ordered data mode
[ 11.760894] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 11.761500] REISERFS (device sda4): checking transaction log (sda4)
[ 11.814706] REISERFS (device sda4): Using r5 hash to sort names
[ 12.064579] fuse init (API version 7.13)
[ 23.424212] iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 23.548059] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
[ 23.617213] Registered led device: iwl-phy0::radio
[ 23.617251] Registered led device: iwl-phy0::assoc
[ 23.617286] Registered led device: iwl-phy0::RX
[ 23.617324] Registered led device: iwl-phy0::TX
[ 23.631167] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.756369] lp: driver loaded but no devices found
[ 23.764725] ppdev: user-space parallel port driver
[ 76.526563] alloc irq_desc for 30 on node -1
[ 76.526570] alloc kstat_irqs on node -1
[ 76.526595] tg3 0000:04:00.0: irq 30 for MSI/MSI-X
[ 76.690764] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 78.768095] usb 4-2: USB disconnect, address 2
[ 84.081154] Registered led device: iwl-phy0::radio
[ 84.081260] Registered led device: iwl-phy0::assoc
[ 84.081303] Registered led device: iwl-phy0::RX
[ 84.081345] Registered led device: iwl-phy0::TX
[ 84.095866] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 84.524517] tg3 0000:04:00.0: PME# enabled
[ 84.524644] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 84.547634] tg3 0000:04:00.0: wake-up capability disabled by ACPI
[ 84.547682] tg3 0000:04:00.0: PME# disabled
[ 84.561255] tg3 0000:04:00.0: irq 30 for MSI/MSI-X
[ 84.726173] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 84.878204] Registered led device: iwl-phy0::radio
[ 84.878315] Registered led device: iwl-phy0::assoc
[ 84.878351] Registered led device: iwl-phy0::RX
[ 84.878384] Registered led device: iwl-phy0::TX
[ 84.890074] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 89.964101] wlan0: direct probe to AP 00:1b:11:38:66:d0 (try 1)
[ 89.966588] wlan0: direct probe responded
[ 89.966594] wlan0: authenticate with AP 00:1b:11:38:66:d0 (try 1)
[ 89.970080] wlan0: authenticated
[ 89.970108] wlan0: associate with AP 00:1b:11:38:66:d0 (try 1)
[ 89.972913] wlan0: RX AssocResp from 00:1b:11:38:66:d0 (capab=0x471 status=0 aid=1)
[ 89.972919] wlan0: associated
[ 89.975608] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 100.580115] wlan0: no IPv6 routers present
[ 133.949899] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 133.949906] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 133.949997] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[ 133.950002] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.111492] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.111499] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.111591] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.111596] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.268600] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.268606] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.268694] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.268699] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.416727] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.416734] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.416826] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.416831] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.569353] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.569360] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.569453] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.569458] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.708735] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.708741] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.708822] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.708827] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.845091] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.845098] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.845192] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.845197] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.991962] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.991969] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 134.992062] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[ 134.992066] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 135.130438] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 135.130444] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 135.130530] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[ 135.130535] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 136.692462] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 136.692469] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 136.692562] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[ 136.692567] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 407.325072] CE: hpet increasing min_delta_ns to 15000 nsec
[ 1298.869086] CE: hpet increasing min_delta_ns to 22500 nsec
[ 2033.426095] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
[ 2033.426102] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[ 2033.669479] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
[ 2033.669486] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[ 2033.701318] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
[ 2033.701324] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[ 2033.717745] atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
[ 2033.717751] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.

** Model information
sys_vendor:
product_name:
product_version: V3.50
chassis_vendor: Acer
chassis_version: N/A
bios_vendor: Acer
bios_version: V3.50
board_vendor: Acer
board_name: Grapevine
board_version: N/A

** Loaded modules:
Module Size Used by
snd_seq_dummy 1343 0
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
fuse 50190 3
cpufreq_conservative 5162 0
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
cpufreq_powersave 902 0
firewire_sbp2 11514 0
loop 11783 0
snd_hda_codec_realtek 235506 1
arc4 1274 2
ecb 1841 2
snd_hda_intel 19907 1
iwl3945 52876 0
snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel
iwlcore 77442 1 iwl3945
snd_hwdep 5380 1 snd_hda_codec
gspca_vc032x 21444 0
snd_pcm 60471 2 snd_hda_intel,snd_hda_codec
mac80211 136844 2 iwl3945,iwlcore
gspca_main 18727 1 gspca_vc032x
snd_seq 42881 1 snd_seq_dummy
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 2 snd_seq_dummy,snd_seq
videodev 29993 1 gspca_main
v4l1_compat 11442 1 videodev
btusb 9785 0
pcmcia 19474 0
snd 46446 10 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec, snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
i2c_i801 7830 0
cfg80211 101432 3 iwl3945,iwlcore,mac80211
soundcore 4598 1 snd
yenta_socket 19115 1
rsrc_nonstatic 7294 1 yenta_socket
bluetooth 41827 1 btusb
v4l2_compat_ioctl32 8538 1 videodev
nvidia 10646314 41
joydev 8411 0
i2c_core 15712 3 videodev,i2c_i801,nvidia
acer_wmi 12640 0
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
tpm_tis 7336 0
tpm 9917 1 tpm_tis
rfkill 13044 3 cfg80211,bluetooth,acer_wmi
video 17445 0
rng_core 3006 0
wmi 4323 1 acer_wmi
serio_raw 3752 0
pcmcia_core 24118 3 pcmcia,yenta_socket,rsrc_nonstatic
tpm_bios 4521 1 tpm
output 1692 1 video
battery 4998 0
container 2389 0
button 4650 0
ac 2192 0
pcspkr 1699 0
processor 30231 2
evdev 7352 19
irda 90114 0
psmouse 49777 0
crc_ccitt 1323 1 irda
reiserfs 194124 2
sg 18744 0
sr_mod 12602 0
sd_mod 29777 5
crc_t10dif 1276 1 sd_mod
cdrom 29415 1 sr_mod
ata_generic 2983 0
ata_piix 21012 4
sdhci_pci 5581 0
sdhci 13966 1 sdhci_pci
uhci_hcd 18521 0
firewire_ohci 19468 0
tg3 95663 0
libata 133520 2 ata_generic,ata_piix
thermal 11674 0
ehci_hcd 31039 0
mmc_core 45472 1 sdhci
led_class 2433 4 iwl3945,iwlcore,acer_wmi,sdhci
firewire_core 36736 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
libphy 14054 1 tg3
usbcore 121959 6 gspca_vc032x,gspca_main,btusb,uhci_hcd,ehci_hcd
nls_base 6361 1 usbcore
thermal_sys 11942 3 video,processor,thermal
scsi_mod 122117 5 firewire_sbp2,sg,sr_mod,sd_mod,libata

** Network interface configuration:

auto lo
iface lo inet loopback

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:16:d4:d6:4a:3d brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:18:de:8e:d6:1a brd ff:ff:ff:ff:ff:ff
inet 192.168.1.3/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::218:deff:fe8e:d61a/64 scope link
valid_lft forever preferred_lft forever

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 3100 58 0 0 0 0 0 0 3100 58 0 0 0 0 0 0
eth3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 9762586 13063 0 0 0 0 0 0 2146360 12620 0 0 0 0 0 0

*** Protocol statistics:
Ip:
12691 total packets received
0 forwarded
0 incoming packets discarded
12691 incoming packets delivered
12511 requests sent out
Icmp:
1 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo replies: 1
1 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
echo request: 1
IcmpMsg:
InType0: 1
OutType8: 1
Tcp:
535 active connections openings
0 passive connection openings
28 failed connection attempts
10 connection resets received
2 connections established
10668 segments received
10462 segments send out
19 segments retransmited
0 bad segments received.
98 resets sent
Udp:
2023 packets received
0 packets to unknown port received.
0 packet receive errors
2029 packets sent
UdpLite:
TcpExt:
1 packets pruned from receive queue because of socket buffer overrun
194 TCP sockets finished time wait in fast timer
366 delayed acks sent
Quick ack mode was activated 8 times
27 packets directly queued to recvmsg prequeue.
33606 bytes directly received in process context from prequeue
7065 packet headers predicted
25 packets header predicted and directly queued to user
1009 acknowledgments not containing data payload received
220 predicted acknowledgments
5 congestion windows recovered without slow start after partial ack
14 other TCP timeouts
27 packets collapsed in receive queue due to low socket buffer
7 DSACKs sent for old packets
2 DSACKs received
18 connections reset due to unexpected data
4 connections reset due to early user close
2 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 1
IpExt:
InMcastPkts: 140
OutMcastPkts: 142
InOctets: 9585576
OutOctets: 1726137
InMcastOctets: 18816
OutMcastOctets: 18896

*** Device features:
eth3: 0x1109b3
lo: 0x13865
wlan0: 0x2000

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: d0000000-d1ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d2500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 84000000-841fffff
Prefetchable memory behind bridge: 0000000084200000-00000000843fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 84400000-845fffff
Prefetchable memory behind bridge: 0000000084600000-00000000847fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d2000000-d20fffff
Prefetchable memory behind bridge: 0000000084800000-00000000849fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: d2100000-d21fffff
Prefetchable memory behind bridge: 0000000084a00000-0000000084bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 50a0 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 50c0 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 50e0 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 5400 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d2504000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32
I/O behind bridge: 00007000-00007fff
Memory behind bridge: d2200000-d22fffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 5440 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 5420 [size=32]
Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: nVidia Corporation G73 [GeForce Go 7600] [10de:0398] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at 6000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: nvidia

04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at d2000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3

05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:1001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at d2100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945

06:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d2201000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at 7000 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

06:04.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller [1524:1412] (rev 10)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00007400-000074ff
I/O window 1: 00007800-000078ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

06:04.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0530] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d2201800 (32-bit, non-prefetchable) [disabled] [size=128]
Capabilities: <access denied>

06:04.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller [1524:0550] (rev 01) (prog-if 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d2201c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci

06:04.3 FLASH memory [0501]: ENE Technology Inc FLASH memory: ENE Technology Inc: [1524:0520] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d2202000 (32-bit, non-prefetchable) [disabled] [size=128]
Capabilities: <access denied>

06:04.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller [1524:0551] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d2201900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:0896 Logitech, Inc. OrbiCam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy
ii initramfs-tools [linux-initra 0.97.2 tools for generating an initramfs
ii linux-base 2.6.32-15 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-15 Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-61 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.26 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100726161613.10721.48175.reportbug@localhost">ht tp://lists.debian.org/20100726161613.10721.48175.reportbug@localhost

Ben Hutchings 07-28-2010 02:53 AM

Bug#590480: linux-image-2.6.32-5-amd64: webcam does not work with gspca driver
 
On Mon, 2010-07-26 at 18:16 +0200, Marco Bajo wrote:
> Package: linux-2.6
> Version: 2.6.32-15
> Severity: important
>
> Webcam worked before the dist-upgrade from Lenny (with drivers found at:
> http://mxhaard.free.fr/download.html).
> Now the drivers are loaded but webcam does not work.
[...]

Can you be more specific? Which webcam program are you using?

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

Ben Hutchings 07-29-2010 12:27 AM

Bug#590480: linux-image-2.6.32-5-amd64: webcam does not work with gspca driver
 
On Wed, 2010-07-28 at 10:11 +0200, Marco Bajo wrote:
> Hi Ben,
>
> I tried with camstream and skype (32bit version forced). With
> camstream
> nothing happened,

camstream versions before 0.27+dfsg-4 don't work with most recent camera
drivers.

> with skype the led near the webcam makes a single pulse,
> then nothing happens.

Skype used to have a similar problem. It's not clear to me whether it
has been fixed.

You may have to install lib32v4l-0 and then run Skype using the command
'LD_PRELOAD=/usr/lib32/libv4l/v4l2convert.so skype'

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.


All times are GMT. The time now is 09:52 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.