FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 07-25-2010, 01:57 PM
OC
 
Default Bug#590280: linux-image-2.6.32-5-amd64: Kernel module for wireless PCI card Realtek RTL8191SE/RTL8192SE

Package: linux-2.6
Version: 2.6.32-18
Severity: normal

Hello,

I did not manage to use my PCI wireless card RTL8191SE with linux-
image-2.6.32-5-amd64 version 2.6.32-18.

The commad "modprobe r8192_pci" does not bring device to life.
Note that I did install the firmware-realtek package version 0.26.
$ ls /lib/firmware/
hp RTL8192E RTL8192SE RTL8192SU

Here is what I did to use the device:

I downloaded rtl8192se_linux_2.6.0017.0507.2010.tar.gz from
http://www.realtek.com/products/productsView.aspx?Langid=1&PNid=21&PFid=48&Level=5 &Conn=4&ProdID=226
and compiled the module.
I also copied the firmware RTL8192SE in /lib/firmware (as already seen in the
ls output above).
Apart from a "make install" problem signaled in Bug#590189, I could bring the
device to life with "insmod r8192se_pci.ko".

My conclusion is that the driver modules provided by the current version of
linux-image-2.6.32-5-amd64 do not allow to use the RTL8191SE card.
Could you include the driver for this card ?

Best regards,

O.C.

Details:
----------------------------------------------------------------
lspci -s 02:00.0 -v
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller
Flags: fast devsel, IRQ 16
I/O ports at 2000 [size=256]
Memory at f8500000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
----------------------------------------------------------------
lspci -s 02:00.0 -vn
02:00.0 0280: 10ec:8172 (rev 10)
Subsystem: 10ec:8172
----------------------------------------------------------------



-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-18) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Sat Jul 24 01:47:24 UTC 2010

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/mon_groupe-volume_logique_root ro quiet

** Tainted: C (1024)
* Module from drivers/staging has been loaded.

** Kernel log:
[11380.508040] =====>rtl8192_set_chan()====ch:6
[11380.620330] =====>rtl8192_set_chan()====ch:7
[11380.736035] =====>rtl8192_set_chan()====ch:8
[11380.848053] =====>rtl8192_set_chan()====ch:9
[11380.961267] =====>rtl8192_set_chan()====ch:10
[11381.072041] =====>rtl8192_set_chan()====ch:11
[11381.184042] =====>rtl8192_set_chan()====ch:12
[11381.296037] =====>rtl8192_set_chan()====ch:13
[11381.409097] =====>rtl8192_set_chan()====ch:11
[11381.419086] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11381.419093] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[11403.669929] rtl8192_hw_sleep_down(): RF Change in progress!
[11439.889937] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[11439.890029] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11439.944062] =====>rtl8192_set_chan()====ch:1
[11440.056318] =====>rtl8192_set_chan()====ch:2
[11440.168040] =====>rtl8192_set_chan()====ch:3
[11440.280080] =====>rtl8192_set_chan()====ch:4
[11440.392046] =====>rtl8192_set_chan()====ch:5
[11440.504030] =====>rtl8192_set_chan()====ch:6
[11440.616034] =====>rtl8192_set_chan()====ch:7
[11440.728087] =====>rtl8192_set_chan()====ch:8
[11440.840673] =====>rtl8192_set_chan()====ch:9
[11440.956072] =====>rtl8192_set_chan()====ch:10
[11441.068741] =====>rtl8192_set_chan()====ch:11
[11441.180050] =====>rtl8192_set_chan()====ch:12
[11441.292036] =====>rtl8192_set_chan()====ch:13
[11441.404299] =====>rtl8192_set_chan()====ch:11
[11441.414289] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11441.414295] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[11443.673218] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again
[11467.669105] rtl8192_hw_sleep_down(): RF Change in progress!
[11471.665106] rtl8192_hw_sleep_down(): RF Change in progress!
[11519.886017] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[11519.886113] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11519.941020] =====>rtl8192_set_chan()====ch:1
[11520.052043] =====>rtl8192_set_chan()====ch:2
[11520.164109] =====>rtl8192_set_chan()====ch:3
[11520.276036] =====>rtl8192_set_chan()====ch:4
[11520.388188] =====>rtl8192_set_chan()====ch:5
[11520.500315] =====>rtl8192_set_chan()====ch:6
[11520.616385] =====>rtl8192_set_chan()====ch:7
[11520.728136] =====>rtl8192_set_chan()====ch:8
[11520.840041] =====>rtl8192_set_chan()====ch:9
[11520.952047] =====>rtl8192_set_chan()====ch:10
[11521.064034] =====>rtl8192_set_chan()====ch:11
[11521.176053] =====>rtl8192_set_chan()====ch:12
[11521.288393] =====>rtl8192_set_chan()====ch:13
[11521.400110] =====>rtl8192_set_chan()====ch:11
[11521.410106] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11521.410113] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[11561.673715] rtl8192_hw_sleep_down(): RF Change in progress!
[11565.668890] rtl8192_hw_sleep_down(): RF Change in progress!
[11619.891540] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[11619.891635] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11619.945102] =====>rtl8192_set_chan()====ch:1
[11620.057042] =====>rtl8192_set_chan()====ch:2
[11620.169041] =====>rtl8192_set_chan()====ch:3
[11620.281030] =====>rtl8192_set_chan()====ch:4
[11620.392034] =====>rtl8192_set_chan()====ch:5
[11620.505035] =====>rtl8192_set_chan()====ch:6
[11620.617051] =====>rtl8192_set_chan()====ch:7
[11620.729037] =====>rtl8192_set_chan()====ch:8
[11620.841131] =====>rtl8192_set_chan()====ch:9
[11620.952091] =====>rtl8192_set_chan()====ch:10
[11621.065031] =====>rtl8192_set_chan()====ch:11
[11621.178258] =====>rtl8192_set_chan()====ch:12
[11621.289049] =====>rtl8192_set_chan()====ch:13
[11621.401216] =====>rtl8192_set_chan()====ch:11
[11621.411212] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11621.411219] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[11635.668031] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again
[11639.664415] MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(0).
[11659.672700] rtl8192_hw_sleep_down(): RF Change in progress!
[11663.665138] rtl8192_hw_sleep_down(): RF Change in progress!
[11723.671917] rtl8192_hw_sleep_down(): RF Change in progress!
[11739.889057] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[11739.889136] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11739.944058] =====>rtl8192_set_chan()====ch:1
[11740.056046] =====>rtl8192_set_chan()====ch:2
[11740.168034] =====>rtl8192_set_chan()====ch:3
[11740.284030] =====>rtl8192_set_chan()====ch:4
[11740.396076] =====>rtl8192_set_chan()====ch:5
[11740.508030] =====>rtl8192_set_chan()====ch:6
[11740.620237] =====>rtl8192_set_chan()====ch:7
[11740.732103] =====>rtl8192_set_chan()====ch:8
[11740.844047] =====>rtl8192_set_chan()====ch:9
[11740.956037] =====>rtl8192_set_chan()====ch:10
[11741.068037] =====>rtl8192_set_chan()====ch:11
[11741.180042] =====>rtl8192_set_chan()====ch:12
[11741.292120] =====>rtl8192_set_chan()====ch:13
[11741.404049] =====>rtl8192_set_chan()====ch:11
[11741.414039] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11741.414045] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[11741.674999] GPIOChangeRF - HW Radio OFF
[11741.675009] ===========>RemovePeerTS,00:25:15:35:ab:64
[11741.675012] ====>remove Tx_TS_admin_list
[11741.675016] ====>remove Tx_TS_admin_list
[11741.935523] =========>r8192_wx_set_essid():hw radio off,or Rf state is eRfOff, return
[11741.936027] =========>r8192_wx_set_essid():hw radio off,or Rf state is eRfOff, return

** Model information
sys_vendor: CLEVO CO.
product_name: W830T/W840T
product_version: Not Applicable
chassis_vendor: No Enclosure
chassis_version: N/A
bios_vendor: Phoenix Technologies LTD
bios_version: 6.00
board_vendor: CLEVO CO.
board_name: W830T/W840T
board_version: Not Applicable

** Loaded modules:
Module Size Used by
r8192se_pci 481728 0
jme 23910 0
michael_mic 1874 4
arc4 1274 2
ecb 1841 2
aes_x86_64 7340 1
aes_generic 25714 1 aes_x86_64
cpufreq_userspace 1992 0
cpufreq_stats 2659 0
cpufreq_powersave 902 0
cpufreq_conservative 5162 0
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
sco 7209 2
bridge 39598 0
stp 1440 1 bridge
bnep 9427 2
rfcomm 29581 0
l2cap 24736 6 bnep,rfcomm
crc16 1319 1 l2cap
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
rfkill 13044 3 bluetooth
binfmt_misc 6431 1
uinput 6376 1
fuse 50190 1
ext2 52969 1
loop 11783 0
snd_hda_codec_intelhdmi 10695 1
snd_hda_codec_realtek 235522 1
snd_hda_intel 19987 1
snd_hda_codec 54244 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_ hda_intel
snd_hwdep 5380 1 snd_hda_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60471 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4400 0
snd_rawmidi 15515 1 snd_seq_midi
uvcvideo 51743 0
videodev 29993 1 uvcvideo
v4l1_compat 11442 2 uvcvideo,videodev
v4l2_compat_ioctl32 8538 1 videodev
joydev 8411 0
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
i915 253184 2
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
drm_kms_helper 20065 1 i915
snd 46446 14 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_ hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_ mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,sn d_seq_device
drm 142551 3 i915,drm_kms_helper
soundcore 4598 1 snd
i2c_i801 7830 0
i2c_algo_bit 4225 1 i915
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
jmb38x_ms 6686 0
wmi 4323 0
i2c_core 15712 6 videodev,i915,drm_kms_helper,drm,i2c_i801,i2c_algo _bit
video 17445 1 i915
output 1692 1 video
pcspkr 1699 0
memstick 5632 1 jmb38x_ms
evdev 7352 22
psmouse 49777 0
serio_raw 3752 0
battery 4998 0
button 4650 1 i915
ac 2192 0
processor 30231 2
ext3 106518 5
jbd 37085 1 ext3
mbcache 5050 2 ext2,ext3
dm_mod 53754 18
sd_mod 29777 3
crc_t10dif 1276 1 sd_mod
ahci 32358 2
sdhci_pci 5581 0
sdhci 13966 1 sdhci_pci
libata 133584 1 ahci
uhci_hcd 18521 0
thermal 11674 0
thermal_sys 11942 3 video,processor,thermal
mii 3210 1 jme
mmc_core 45472 1 sdhci
led_class 2433 1 sdhci
ehci_hcd 31135 0
scsi_mod 122117 2 sd_mod,libata
usbcore 121959 4 uvcvideo,uhci_hcd,ehci_hcd
nls_base 6361 1 usbcore

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 22:16:27:03:04:56 brd ff:ff:ff:ff:ff:ff
5: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:90:f5:96:16:51 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.56/24 brd 192.168.1.255 scope global eth0
inet6 fe80::290:f5ff:fe96:1651/64 scope link
valid_lft forever preferred_lft forever
6: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:01:38:fc:e0:7b brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 6150 66 0 0 0 0 0 0 6150 66 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0:199668702 136191 0 0 0 0 0 146 7063328 86248 0 0 0 0 0 0
wlan0: 3959 21 0 0 0 0 0 0 6484 32 0 0 0 0 0 0

*** Protocol statistics:
Ip:
149376 total packets received
5 with invalid addresses
0 forwarded
0 incoming packets discarded
149329 incoming packets delivered
96923 requests sent out
8 outgoing packets dropped
23 dropped because of missing route
Icmp:
8 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 8
8 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 8
IcmpMsg:
InType3: 8
OutType3: 8
Tcp:
941 active connections openings
5 passive connection openings
1 failed connection attempts
36 connection resets received
0 connections established
146489 segments received
94275 segments send out
41 segments retransmited
0 bad segments received.
88 resets sent
Udp:
2552 packets received
8 packets to unknown port received.
0 packet receive errors
2550 packets sent
UdpLite:
TcpExt:
286 TCP sockets finished time wait in fast timer
499 delayed acks sent
Quick ack mode was activated 19 times
27 packets directly queued to recvmsg prequeue.
14685 bytes directly received in process context from prequeue
115766 packet headers predicted
6 packets header predicted and directly queued to user
1765 acknowledgments not containing data payload received
119 predicted acknowledgments
3 congestion windows recovered without slow start after partial ack
19 other TCP timeouts
5 DSACKs sent for old packets
1 DSACKs received
16 connections reset due to unexpected data
29 connections reset due to early user close
3 connections aborted due to timeout
IpExt:
InMcastPkts: 360
OutMcastPkts: 152
InBcastPkts: 3
InOctets: 211404491
OutOctets: 7149153
InMcastOctets: 22023
OutMcastOctets: 14088
InBcastOctets: 984

*** Device features:
eth0: 0x1109a9
lo: 0x13865
pan0: 0xff3865
wlan0: 0x0

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 0: Memory at f8904800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f8700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8500000-f85fffff
Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f4000000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f8600000-f86fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f8904c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at 1818 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1810 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 18e0 [size=32]
Region 5: Memory at f8904000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at 80400000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]

02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8172] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8172]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at f8500000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl819xSE

06:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382] (rev 80)
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f8604000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci

06:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381] (rev 80) (prog-if 01)
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f8604400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

06:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383] (rev 80)
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f8604800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms

06:00.5 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 03)
Subsystem: CLEVO/KAPOK Computer Device [1558:8430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 29
Region 0: Memory at f8600000 (32-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 4400 [size=128]
Region 3: I/O ports at 4000 [size=256]
Capabilities: <access denied>
Kernel driver in use: jme


** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy
ii initramfs-tools [linux-initra 0.97.2 tools for generating an initramfs
ii linux-base 2.6.32-18 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100725135702.7793.107.reportbug@surcouf">http://lists.debian.org/20100725135702.7793.107.reportbug@surcouf
 

Thread Tools




All times are GMT. The time now is 07:15 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org