Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#573264: Also with 2.6.32-5-686 (Debian 2.6.32-15) (http://www.linux-archive.org/debian-kernel/403589-bug-573264-also-2-6-32-5-686-debian-2-6-32-15-a.html)

Robert Scott 07-24-2010 12:46 PM

Bug#573264: Also with 2.6.32-5-686 (Debian 2.6.32-15)
 
FWIW I am also getting this on squeeze with

ii xserver-xorg 1:7.4+4
ii xserver-xorg-core 2:1.6.3.901-1
ii xserver-xorg-video-intel 2:2.8.1-2

Linux version 2.6.32-5-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010

It's very rare - only happened once to me at random while I was working.

Logs attached.


robert.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004f6e0000 (usable)
[ 0.000000] BIOS-e820: 000000004f6e0000 - 000000004f6f7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004f6f7000 - 000000004f6f9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000004f700000 - 0000000050000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x4f6e0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FF0000000 write-back
[ 0.000000] 2 base 04FF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 377f3000 - 37fef924
[ 0.000000] Allocated new RAMDISK: 00100000 - 008fc924
[ 0.000000] Move RAMDISK from 00000000377f3000 - 0000000037fef923 to 00100000 - 008fc923
[ 0.000000] ACPI: RSDP 000f6e40 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 4f6ef33d 0004C (v01 IBM TP-1W 00002080 LTP 00000000)
[ 0.000000] ACPI: FACP 4f6ef400 000F4 (v03 IBM TP-1W 00002080 IBM 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 4f6ef5e7 07865 (v01 IBM TP-1W 00002080 MSFT 0100000E)
[ 0.000000] ACPI: FACS 4f6f8000 00040
[ 0.000000] ACPI: SSDT 4f6ef5b4 00033 (v01 IBM TP-1W 00002080 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 4f6f6e4c 00052 (v01 IBM TP-1W 00002080 IBM 00000001)
[ 0.000000] ACPI: TCPA 4f6f6e9e 00032 (v01 IBM TP-1W 00002080 PTL 00000001)
[ 0.000000] ACPI: BOOT 4f6f6fd8 00028 (v01 IBM TP-1W 00002080 LTP 00000001)
[ 0.000000] 386MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==> [0001000000 - 00014c3154]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00014c4000 - 00014ca128] BRK ==> [00014c4000 - 00014ca128]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 00008fc924] NEW RAMDISK ==> [0000100000 - 00008fc924]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0004f6e0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0004f6e0
[ 0.000000] On node 0 totalpages: 325247
[ 0.000000] free_area_init_node: node 0, pgdat c13ae680, node_mem_map c14cc000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 774 pages used for memmap
[ 0.000000] HighMem zone: 98268 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:af800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34136 r0 d23208 u4194304
[ 0.000000] pcpu-alloc: s34136 r0 d23208 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 322705
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=99005700-4148-4c8f-b292-063d21c30cf2 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0004f6e0)
[ 0.000000] Memory: 1275792k/1301376k available (2490k kernel code, 24172k reserved, 1318k data, 372k init, 396168k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB)
[ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1398.684 MHz processor.
[ 0.012010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2797.36 BogoMIPS (lpj=5594736)
[ 0.012044] Security Framework initialized
[ 0.012058] SELinux: Disabled at boot.
[ 0.012071] Mount-cache hash table entries: 512
[ 0.012269] Initializing cgroup subsys ns
[ 0.012276] Initializing cgroup subsys cpuacct
[ 0.012282] Initializing cgroup subsys devices
[ 0.012288] Initializing cgroup subsys freezer
[ 0.012292] Initializing cgroup subsys net_cls
[ 0.012329] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012333] CPU: L2 cache: 1024K
[ 0.012342] mce: CPU supports 5 MCE banks
[ 0.012367] Performance Events:
[ 0.012370] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.012373] no hardware sampling interrupt available.
[ 0.012376] p6 PMU driver.
[ 0.012383] ... version: 0
[ 0.012386] ... bit width: 32
[ 0.012388] ... generic registers: 2
[ 0.012391] ... value mask: 00000000ffffffff
[ 0.012394] ... max period: 000000007fffffff
[ 0.012396] ... fixed-purpose events: 0
[ 0.012399] ... event mask: 0000000000000003
[ 0.012407] Checking 'hlt' instruction... OK.
[ 0.028505] SMP alternatives: switching to UP code
[ 0.033285] Freeing SMP alternatives: 13k freed
[ 0.033294] ACPI: Core revision 20090903
[ 0.049052] ACPI: setting ELCR to 0200 (from 0800)
[ 0.052085] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.052089] weird, boot CPU (#0) not listed by the BIOS.
[ 0.052091] SMP motherboard not detected.
[ 0.052095] Local APIC not detected. Using dummy APIC emulation.
[ 0.052097] SMP disabled
[ 0.052367] Brought up 1 CPUs
[ 0.052370] Total of 1 processors activated (2797.36 BogoMIPS).
[ 0.056051] CPU0 attaching NULL sched-domain.
[ 0.056199] devtmpfs: initialized
[ 0.056726] regulator: core version 0.5
[ 0.056788] NET: Registered protocol family 16
[ 0.056906] ACPI: bus type pci registered
[ 0.057144] PCI: PCI BIOS revision 2.10 entry at 0xfd8c6, last bus=5
[ 0.057148] PCI: Using configuration type 1 for base access
[ 0.057627] bio: create slab <bio-0> at 0
[ 0.058598] ACPI: EC: EC description table is found, configuring boot EC
[ 0.065467] ACPI: Interpreter enabled
[ 0.065467] ACPI: (supports S0 S3 S4 S5)
[ 0.065467] ACPI: Using PIC for interrupt routing
[ 0.072814] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.072864] ACPI: Power Resource [PUBS] (on)
[ 0.072864] ACPI: No dock devices found.
[ 0.072864] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.072864] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.072864] pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff]
[ 0.072864] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
[ 0.072864] pci 0000:00:02.0: supports D1
[ 0.072864] pci 0000:00:02.1: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.072864] pci 0000:00:02.1: reg 14 32bit mmio: [0xd0080000-0xd00fffff]
[ 0.072864] pci 0000:00:02.1: supports D1
[ 0.072864] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.072864] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.072864] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.072864] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0100000-0xd01003ff]
[ 0.072864] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.072864] pci 0000:00:1d.7: PME# disabled
[ 0.072938] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.072943] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.072968] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.072976] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.072984] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.072991] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.072999] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.073008] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.073058] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[ 0.073100] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.073108] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.073115] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0100c00-0xd0100dff]
[ 0.073123] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0100800-0xd01008ff]
[ 0.073152] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.073157] pci 0000:00:1f.5: PME# disabled
[ 0.073187] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.073194] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.073230] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.073235] pci 0000:00:1f.6: PME# disabled
[ 0.073274] pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff]
[ 0.073293] pci 0000:02:00.0: supports D1 D2
[ 0.073296] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.073302] pci 0000:02:00.0: PME# disabled
[ 0.073343] pci 0000:02:08.0: reg 10 32bit mmio: [0xd0200000-0xd0200fff]
[ 0.073351] pci 0000:02:08.0: reg 14 io port: [0x7000-0x703f]
[ 0.073386] pci 0000:02:08.0: supports D1 D2
[ 0.073389] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.073394] pci 0000:02:08.0: PME# disabled
[ 0.073427] pci 0000:00:1e.0: transparent bridge
[ 0.073432] pci 0000:00:1e.0: bridge io port: [0x3000-0x7fff]
[ 0.073438] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
[ 0.073444] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.073468] pci_bus 0000:00: on NUMA node 0
[ 0.073475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.073567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.079563] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.079778] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.079990] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.080213] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.080423] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.080613] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.080803] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.081016] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.081169] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.081179] vgaarb: loaded
[ 0.081261] PCI: Using ACPI for IRQ routing
[ 0.081526] Switching to clocksource tsc
[ 0.083357] pnp: PnP ACPI init
[ 0.083378] ACPI: bus type pnp registered
[ 0.084282] pnp: PnP ACPI: found 10 devices
[ 0.084285] ACPI: ACPI bus type pnp unregistered
[ 0.084290] PnPBIOS: Disabled by ACPI PNP
[ 0.084304] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.084309] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.084314] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.084318] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.084323] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 0.084328] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.084333] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.084337] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.084342] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.084347] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.084352] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.084356] system 00:00: iomem range 0x100000-0x4fffffff could not be reserved
[ 0.084362] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.084372] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.084376] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.084381] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.084386] system 00:02: ioport range 0x1600-0x167f has been reserved
[ 0.119173] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
[ 0.119177] pci 0000:02:00.0: IO window: 0x003000-0x0030ff
[ 0.119183] pci 0000:02:00.0: IO window: 0x003400-0x0034ff
[ 0.119189] pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
[ 0.119195] pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff
[ 0.119200] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.119205] pci 0000:00:1e.0: IO window: 0x3000-0x7fff
[ 0.119212] pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff
[ 0.119218] pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf7ffffff
[ 0.119234] pci 0000:00:1e.0: setting latency timer to 64
[ 0.119619] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.119623] PCI: setting IRQ 11 as level-triggered
[ 0.119630] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.119638] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.119642] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.119647] pci_bus 0000:02: resource 0 io: [0x3000-0x7fff]
[ 0.119651] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
[ 0.119655] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 0.119659] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.119663] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.119667] pci_bus 0000:03: resource 0 io: [0x3000-0x30ff]
[ 0.119671] pci_bus 0000:03: resource 1 io: [0x3400-0x34ff]
[ 0.119675] pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
[ 0.119679] pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
[ 0.119723] NET: Registered protocol family 2
[ 0.119833] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.120236] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.121829] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.122969] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.122975] TCP reno registered
[ 0.123162] NET: Registered protocol family 1
[ 0.123205] pci 0000:00:02.0: Boot video device
[ 0.123302] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.123389] Unpacking initramfs...
[ 0.482083] Freeing initrd memory: 8178k freed
[ 0.490571] Simple Boot Flag at 0x35 set to 0x1
[ 0.490930] audit: initializing netlink socket (disabled)
[ 0.490956] type=2000 audit(1279641324.490:1): initialized
[ 0.491258] highmem bounce pool size: 64 pages
[ 0.491265] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.493290] VFS: Disk quotas dquot_6.5.2
[ 0.493382] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.493490] msgmni has been set to 1736
[ 0.493771] alg: No test for stdrng (krng)
[ 0.493848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.493853] io scheduler noop registered
[ 0.493856] io scheduler anticipatory registered
[ 0.493859] io scheduler deadline registered
[ 0.493907] io scheduler cfq registered (default)
[ 0.494126] isapnp: Scanning for PnP cards...
[ 0.846871] isapnp: No Plug & Play device found
[ 0.848657] Linux agpgart interface v0.103
[ 0.848753] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 0.849357] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 0.851144] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 0.851236] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.852040] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.852047] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.852056] serial 0000:00:1f.6: PCI INT B disabled
[ 0.852170] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.858676] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.858689] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.858817] mice: PS/2 mouse device common for all mice
[ 0.858872] rtc_cmos 00:06: RTC can wake from S4
[ 0.858922] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.858941] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.858955] cpuidle: using governor ladder
[ 0.858957] cpuidle: using governor menu
[ 0.858963] No iBFT detected.
[ 0.859430] TCP cubic registered
[ 0.859622] NET: Registered protocol family 10
[ 0.860214] lo: Disabled Privacy Extensions
[ 0.860619] Mobile IPv6
[ 0.860623] NET: Registered protocol family 17
[ 0.860642] Using IPI No-Shortcut mode
[ 0.860727] PM: Resume from disk failed.
[ 0.860736] registered taskstats version 1
[ 0.860971] rtc_cmos 00:06: setting system clock to 2010-07-20 15:55:25 UTC (1279641325)
[ 0.861018] Initalizing network drop monitor service
[ 0.861051] Freeing unused kernel memory: 372k freed
[ 0.861296] Write protecting the kernel text: 2492k
[ 0.861324] Write protecting the kernel read-only data: 916k
[ 0.862958] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.886739] udev: starting version 158
[ 1.138218] usbcore: registered new interface driver usbfs
[ 1.138407] usbcore: registered new interface driver hub
[ 1.138593] usbcore: registered new device driver usb
[ 1.143295] SCSI subsystem initialized
[ 1.180112] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.180373] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.180783] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.181172] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 1.181179] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 1.181204] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.181209] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.181253] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.181291] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.185161] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.193290] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.193313] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.193647] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.193659] ACPI: Thermal Zone [THM0] (44 C)
[ 1.194595] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 1.194603] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 1.217322] e100 0000:02:08.0: PME# disabled
[ 1.217554] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000
[ 1.221456] libata version 3.00 loaded.
[ 1.229274] e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:0a:e4:c4:14:a5
[ 1.240026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.240069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.240073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240077] usb usb1: Product: EHCI Host Controller
[ 1.240081] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.240084] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.240206] usb usb1: configuration #1 chosen from 1 choice
[ 1.240251] hub 1-0:1.0: USB hub found
[ 1.240263] hub 1-0:1.0: 6 ports detected
[ 1.243565] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.243639] ata_piix 0000:00:1f.1: version 2.13
[ 1.243655] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.244122] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.244128] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.244180] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.244740] scsi0 : ata_piix
[ 1.244916] scsi1 : ata_piix
[ 1.245728] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.245733] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.246263] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.246475] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.246484] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.246493] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.246498] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.246522] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.246549] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
[ 1.246610] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.246614] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.246618] usb usb2: Product: UHCI Host Controller
[ 1.246621] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.246625] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.246738] usb usb2: configuration #1 chosen from 1 choice
[ 1.246784] hub 2-0:1.0: USB hub found
[ 1.246794] hub 2-0:1.0: 2 ports detected
[ 1.247066] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.247226] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.247597] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.247603] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.247611] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.247615] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.247628] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.247653] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[ 1.247694] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.247698] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.247702] usb usb3: Product: UHCI Host Controller
[ 1.247705] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.247709] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.247845] usb usb3: configuration #1 chosen from 1 choice
[ 1.247931] hub 3-0:1.0: USB hub found
[ 1.247941] hub 3-0:1.0: 2 ports detected
[ 1.247999] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.248034] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.248038] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.248049] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.248072] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
[ 1.248112] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.248116] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.248120] usb usb4: Product: UHCI Host Controller
[ 1.248123] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.248126] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.248255] usb usb4: configuration #1 chosen from 1 choice
[ 1.248348] hub 4-0:1.0: USB hub found
[ 1.248357] hub 4-0:1.0: 2 ports detected
[ 1.408548] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, 1.02, max UDMA/33
[ 1.408992] ata1.00: ATA-6: HTS541040G9AT00, MB2IA60A, max UDMA/100
[ 1.408997] ata1.00: 78140160 sectors, multi 16: LBA
[ 1.424336] ata2.00: configured for UDMA/33
[ 1.424729] ata1.00: configured for UDMA/100
[ 1.424900] scsi 0:0:0:0: Direct-Access ATA HTS541040G9AT00 MB2I PQ: 0 ANSI: 5
[ 1.429586] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4244N 1.02 PQ: 0 ANSI: 5
[ 1.456734] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.456809] sd 0:0:0:0: [sda] Write Protect is off
[ 1.456814] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.456845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.457042] sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.468981] Uniform CD-ROM driver Revision: 3.20
[ 1.469338] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.476277] sda1 sda2 sda3 < sda5 sda6 >
[ 1.549257] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.565043] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.565533] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.037562] PM: Starting manual resume from disk
[ 2.037568] PM: Resume from partition 8:2
[ 2.037571] PM: Checking hibernation image.
[ 2.037782] PM: Error -22 checking image file
[ 2.037784] PM: Resume from disk failed.
[ 2.063487] kjournald starting. Commit interval 5 seconds
[ 2.063500] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.330644] udev: starting version 158
[ 4.761867] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 4.762618] ACPI: Lid Switch [LID]
[ 4.762705] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 4.762714] ACPI: Sleep Button [SLPB]
[ 4.762802] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.762808] ACPI: Power Button [PWRF]
[ 4.839583] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 4.839597] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 5.093427] Marking TSC unstable due to TSC halts in idle
[ 5.094678] processor LNXCPU:00: registered as cooling_device0
[ 5.100601] Switching to clocksource acpi_pm
[ 5.105500] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.121279] ACPI: AC Adapter [AC] (on-line)
[ 5.122058] Non-volatile memory driver v1.3
[ 5.122073] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.155521] ACPI: Battery Slot [BAT0] (battery present)
[ 5.168137] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.168180] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 5.224711] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 5.225993] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.227656] intel_rng: FWH not detected
[ 5.338445] thinkpad_acpi: ThinkPad ACPI Extras v0.23
[ 5.338449] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.338452] thinkpad_acpi: ThinkPad BIOS 1WET88WW (2.08 ), EC 1VHT28WW-1.04
[ 5.338455] thinkpad_acpi: IBM ThinkPad R50e, model 1834S3G
[ 5.338459] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[ 5.338462] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[ 5.345919] Registered led device: tpacpi::thinklight
[ 5.346173] Registered led device: tpacpi::power
[ 5.346411] Registered led device: tpacpi::standby
[ 5.348444] thinkpad_acpi: brightness: will use unverified default: brightness_mode=3
[ 5.348448] thinkpad_acpi: brightness: please report to ibm-acpi-devel@lists.sourceforge.net whether it works well or not on your ThinkPad
[ 5.352213] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 5.359152] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
[ 5.359173] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
[ 5.359177] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
[ 5.359183] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
[ 5.418532] [drm] Initialized drm 1.1.0 20060810
[ 5.588833] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0478, PCI irq 11
[ 5.588839] yenta_cardbus 0000:02:00.0: Socket status: 30000007
[ 5.588852] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
[ 5.588858] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: clean.
[ 5.590653] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
[ 5.590658] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[ 5.666110] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 5.681212] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[ 5.841174] pci 0000:00:02.0: power state changed by ACPI to D0
[ 5.841224] pci 0000:00:02.0: power state changed by ACPI to D0
[ 5.841235] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 5.841243] pci 0000:00:02.0: setting latency timer to 64
[ 5.847811] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.175621] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 6.176574] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 6.176961] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 6.177282] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 6.177754] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 6.734862] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 6.734886] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 6.836175] MC'97 1 converters and GPIO not ready (0xff00)
[ 6.840585] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 6.840663] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 7.764042] intel8x0_measure_ac97_clock: measured 55338 usecs (2666 samples)
[ 7.764046] intel8x0: clocking to 48000
[ 8.404625] Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
[ 8.777472] EXT3 FS on sda1, internal journal
[ 9.029751] Uniform Multi-Platform E-IDE driver
[ 9.037746] ide-cd driver 5.00
[ 9.046413] ide-gd driver 1.18
[ 9.050115] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 9.125436] device-mapper: uevent: version 1.0.3
[ 9.126195] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 10.349469] fuse init (API version 7.13)
[ 10.873724] kjournald starting. Commit interval 5 seconds
[ 10.874012] EXT3 FS on sda5, internal journal
[ 10.874018] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.905627] kjournald starting. Commit interval 5 seconds
[ 10.905947] EXT3 FS on sda6, internal journal
[ 10.905952] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.738366] IBM machine detected. Enabling interrupts during APM calls.
[ 14.738371] apm: BIOS not found.
[ 17.281409] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
[ 17.281415] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
[ 17.321962] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input8
[ 20.073234] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.076171] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 20.078109] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.081092] lp0: using parport0 (interrupt-driven).
[ 20.100147] ppdev: user-space parallel port driver
[ 30.912026] eth0: no IPv6 routers present
[35020.256562] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[35020.256569] PM: Basic memory bitmaps created
[35020.256572] PM: Syncing filesystems ... done.
[35020.484166] Freezing user space processes ... (elapsed 0.05 seconds) done.
[35020.536502] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[35020.536570] PM: Preallocating image memory... done (allocated 191188 pages)
[35024.279787] PM: Allocated 764752 kbytes in 3.74 seconds (204.47 MB/s)
[35024.279791] Suspending console(s) (use no_console_suspend to debug)
[35024.484134] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[35024.500956] parport_pc 00:09: disabled
[35024.501061] e100 0000:02:08.0: PCI INT A disabled
[35024.501069] e100 0000:02:08.0: PME# enabled
[35024.501078] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[35024.516274] Intel ICH Modem 0000:00:1f.6: PCI INT B disabled
[35024.532314] Intel ICH 0000:00:1f.5: PCI INT B disabled
[35024.532520] ata_piix 0000:00:1f.1: PCI INT A disabled
[35024.532531] pci 0000:00:02.0: PCI INT A disabled
[35024.533411] ACPI: Preparing to enter system sleep state S4
[35024.604093] PM: Saving platform NVS memory
[35024.605086] Disabling non-boot CPUs ...
[35024.605198] Extended CMOS year: 2000
[35024.605215] PM: Creating hibernation image:
[35024.608013] PM: Need to copy 103812 pages
[35024.608013] PM: Normal pages needed: 61350 + 1024, available pages: 164832
[35024.608013] PM: Restoring platform NVS memory
[35024.608013] Extended CMOS year: 2000
[35024.608013] ACPI: Waking up from system sleep state S4
[35024.880162] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x980007)
[35024.888072] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[35024.896071] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[35024.904069] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[35024.912070] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[35024.920070] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[35024.928069] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[35024.936069] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[35024.944069] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[35024.952070] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[35024.960070] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[35024.960132] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800003, writing 0x2800007)
[35024.960178] Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[35024.960217] yenta_cardbus 0000:02:00.0: restoring config space at offset 0xf (was 0x3c0010b, writing 0x5c0010b)
[35024.960235] yenta_cardbus 0000:02:00.0: restoring config space at offset 0x3 (was 0x24008, writing 0x2a808)
[35024.960242] yenta_cardbus 0000:02:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007)
[35024.976035] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x3808010b)
[35024.976051] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4208)
[35024.976058] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900117)
[35025.042253] pci 0000:00:02.0: power state changed by ACPI to D0
[35025.042300] pci 0000:00:02.0: power state changed by ACPI to D0
[35025.042311] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[35025.042317] pci 0000:00:02.0: setting latency timer to 64
[35025.042328] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[35025.042357] usb usb2: root hub lost power or was reset
[35025.042375] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[35025.042402] usb usb3: root hub lost power or was reset
[35025.042417] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[35025.042445] usb usb4: root hub lost power or was reset
[35025.042461] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[35025.042466] usb usb1: root hub lost power or was reset
[35025.046348] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[35025.046375] pci 0000:00:1e.0: setting latency timer to 64
[35025.046390] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[35025.046395] ata_piix 0000:00:1f.1: setting latency timer to 64
[35025.049367] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[35025.049374] Intel ICH 0000:00:1f.5: setting latency timer to 64
[35025.212650] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[35025.212656] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[35025.213120] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[35025.213125] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[35025.213131] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[35025.213136] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[35025.213824] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[35025.214788] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[35025.236446] ata2.00: configured for UDMA/33
[35025.236956] ata1.00: configured for UDMA/100
[35025.260702] ata1.00: configured for UDMA/100
[35025.260706] ata1: EH complete
[35026.062001] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[35026.062008] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[35027.204140] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[35027.204146] e100 0000:02:08.0: PME# disabled
[35027.204836] parport_pc 00:09: activated
[35027.336154] sd 0:0:0:0: [sda] Starting disk
[35027.363517] pci 0000:00:02.0: setting latency timer to 64
[35027.365034] PM: Image restored successfully.
[35027.365037] Restarting tasks ... done.
[35027.376140] PM: Basic memory bitmaps freed
[35034.689235] ADDRCONF(NETDEV_UP): eth0: link is not ready
[35034.692174] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[35034.692644] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[35044.848149] eth0: no IPv6 routers present
[52246.892634] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[52246.892641] PM: Basic memory bitmaps created
[52246.892643] PM: Syncing filesystems ... done.
[52246.916149] Freezing user space processes ... (elapsed 0.00 seconds) done.
[52246.917388] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[52246.917461] PM: Preallocating image memory... done (allocated 191188 pages)
[52247.597581] PM: Allocated 764752 kbytes in 0.68 seconds (1124.63 MB/s)
[52247.597585] Suspending console(s) (use no_console_suspend to debug)
[52247.800137] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[52247.858909] parport_pc 00:09: disabled
[52247.859015] e100 0000:02:08.0: PME# enabled
[52247.859026] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[52247.872277] Intel ICH Modem 0000:00:1f.6: PCI INT B disabled
[52247.888316] Intel ICH 0000:00:1f.5: PCI INT B disabled
[52247.888519] ata_piix 0000:00:1f.1: PCI INT A disabled
[52247.888530] pci 0000:00:02.0: PCI INT A disabled
[52247.889426] ACPI: Preparing to enter system sleep state S4
[52247.960093] PM: Saving platform NVS memory
[52247.960769] Disabling non-boot CPUs ...
[52247.960877] Extended CMOS year: 2000
[52247.960894] PM: Creating hibernation image:
[52247.964012] PM: Need to copy 109900 pages
[52247.964012] PM: Normal pages needed: 67750 + 1024, available pages: 158432
[52247.964012] PM: Restoring platform NVS memory
[52247.964012] Extended CMOS year: 2000
[52247.964012] ACPI: Waking up from system sleep state S4
[52248.236163] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x980007)
[52248.244072] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[52248.252070] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[52248.260070] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[52248.268070] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[52248.276069] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[52248.284070] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[52248.292069] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[52248.300070] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[52248.308070] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[52248.316070] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[52248.316133] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800003, writing 0x2800007)
[52248.316178] Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[52248.316218] yenta_cardbus 0000:02:00.0: restoring config space at offset 0xf (was 0x3c0010b, writing 0x5c0010b)
[52248.316235] yenta_cardbus 0000:02:00.0: restoring config space at offset 0x3 (was 0x24008, writing 0x2a808)
[52248.316243] yenta_cardbus 0000:02:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007)
[52248.332035] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x3808010b)
[52248.332051] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4208)
[52248.332058] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900117)
[52248.401393] pci 0000:00:02.0: power state changed by ACPI to D0
[52248.401440] pci 0000:00:02.0: power state changed by ACPI to D0
[52248.401452] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[52248.401459] pci 0000:00:02.0: setting latency timer to 64
[52248.401469] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[52248.401499] usb usb2: root hub lost power or was reset
[52248.401516] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[52248.401544] usb usb3: root hub lost power or was reset
[52248.401559] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[52248.401587] usb usb4: root hub lost power or was reset
[52248.401602] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[52248.401608] usb usb1: root hub lost power or was reset
[52248.405505] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[52248.405522] pci 0000:00:1e.0: setting latency timer to 64
[52248.405536] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[52248.405541] ata_piix 0000:00:1f.1: setting latency timer to 64
[52248.407642] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[52248.407668] Intel ICH 0000:00:1f.5: setting latency timer to 64
[52248.568651] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[52248.568657] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[52248.569118] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[52248.569124] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[52248.569130] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[52248.569135] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[52248.569539] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[52248.570499] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[52248.592446] ata2.00: configured for UDMA/33
[52248.592956] ata1.00: configured for UDMA/100
[52248.616702] ata1.00: configured for UDMA/100
[52248.616706] ata1: EH complete
[52249.418006] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[52249.418013] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[52250.560139] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[52250.560145] e100 0000:02:08.0: PME# disabled
[52250.560829] parport_pc 00:09: activated
[52250.692152] sd 0:0:0:0: [sda] Starting disk
[52250.717522] pci 0000:00:02.0: setting latency timer to 64
[52250.718918] PM: Image restored successfully.
[52250.718921] Restarting tasks ... done.
[52250.741282] PM: Basic memory bitmaps freed
[52252.745389] ADDRCONF(NETDEV_UP): eth0: link is not ready
[52252.748169] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[52252.748651] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[52263.392149] eth0: no IPv6 routers present
[52277.000429] e100: eth0 NIC Link is Down
[52283.000281] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[52521.000377] e100: eth0 NIC Link is Down
[52527.000280] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[86935.672520] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[86935.672526] PM: Basic memory bitmaps created
[86935.672529] PM: Syncing filesystems ... done.
[86935.696080] Freezing user space processes ... (elapsed 0.00 seconds) done.
[86935.699664] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[86935.699737] PM: Preallocating image memory... done (allocated 191188 pages)
[86949.567586] PM: Allocated 764752 kbytes in 13.86 seconds (55.17 MB/s)
[86949.567590] Suspending console(s) (use no_console_suspend to debug)
[86949.772137] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[86949.807273] parport_pc 00:09: disabled
[86949.807379] e100 0000:02:08.0: PME# enabled
[86949.807389] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[86949.820297] Intel ICH Modem 0000:00:1f.6: PCI INT B disabled
[86949.836315] Intel ICH 0000:00:1f.5: PCI INT B disabled
[86949.836525] ata_piix 0000:00:1f.1: PCI INT A disabled
[86949.836535] pci 0000:00:02.0: PCI INT A disabled
[86949.837520] ACPI: Preparing to enter system sleep state S4
[86949.908093] PM: Saving platform NVS memory
[86949.909034] Disabling non-boot CPUs ...
[86949.909146] Extended CMOS year: 2000
[86949.909164] PM: Creating hibernation image:
[86949.912013] PM: Need to copy 107618 pages
[86949.912013] PM: Normal pages needed: 76043 + 1024, available pages: 150139
[86949.912013] PM: Restoring platform NVS memory
[86949.912013] Extended CMOS year: 2000
[86949.912013] ACPI: Waking up from system sleep state S4
[86950.184165] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x980007)
[86950.192071] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[86950.200070] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[86950.208070] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[86950.216070] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[86950.224070] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[86950.232069] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[86950.240070] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[86950.248070] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[86950.256070] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[86950.264070] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[86950.264132] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800003, writing 0x2800007)
[86950.264177] Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[86950.264217] yenta_cardbus 0000:02:00.0: restoring config space at offset 0xf (was 0x3c0010b, writing 0x5c0010b)
[86950.264234] yenta_cardbus 0000:02:00.0: restoring config space at offset 0x3 (was 0x24008, writing 0x2a808)
[86950.264242] yenta_cardbus 0000:02:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007)
[86950.280040] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x3808010b)
[86950.280056] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4208)
[86950.280063] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900117)
[86950.345038] pci 0000:00:02.0: power state changed by ACPI to D0
[86950.345085] pci 0000:00:02.0: power state changed by ACPI to D0
[86950.345095] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[86950.345102] pci 0000:00:02.0: setting latency timer to 64
[86950.345112] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[86950.345142] usb usb2: root hub lost power or was reset
[86950.345159] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[86950.345186] usb usb3: root hub lost power or was reset
[86950.345201] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[86950.345229] usb usb4: root hub lost power or was reset
[86950.345244] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[86950.345250] usb usb1: root hub lost power or was reset
[86950.349120] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[86950.349136] pci 0000:00:1e.0: setting latency timer to 64
[86950.349151] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[86950.349156] ata_piix 0000:00:1f.1: setting latency timer to 64
[86950.351258] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[86950.351284] Intel ICH 0000:00:1f.5: setting latency timer to 64
[86950.512652] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[86950.512658] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[86950.513120] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[86950.513125] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[86950.513131] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[86950.513136] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[86950.513540] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[86950.514501] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[86950.536446] ata2.00: configured for UDMA/33
[86950.536957] ata1.00: configured for UDMA/100
[86950.560703] ata1.00: configured for UDMA/100
[86950.560707] ata1: EH complete
[86951.362016] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[86951.362023] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[86952.504141] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[86952.504147] e100 0000:02:08.0: PME# disabled
[86952.504837] parport_pc 00:09: activated
[86952.636154] sd 0:0:0:0: [sda] Starting disk
[86952.658355] pci 0000:00:02.0: setting latency timer to 64
[86952.659846] PM: Image restored successfully.
[86952.659849] Restarting tasks ... done.
[86952.665328] PM: Basic memory bitmaps freed
[86966.637267] ADDRCONF(NETDEV_UP): eth0: link is not ready
[86966.640178] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[86966.641183] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[86977.168033] eth0: no IPv6 routers present
[105993.000429] e100: eth0 NIC Link is Down
[105995.000285] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[118548.392624] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[118548.392631] PM: Basic memory bitmaps created
[118548.392634] PM: Syncing filesystems ... done.
[118548.416043] Freezing user space processes ... (elapsed 0.00 seconds) done.
[118548.418779] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[118548.418850] PM: Preallocating image memory... done (allocated 191188 pages)
[118552.197379] PM: Allocated 764752 kbytes in 3.77 seconds (202.85 MB/s)
[118552.197383] Suspending console(s) (use no_console_suspend to debug)
[118552.400134] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[118552.400571] parport_pc 00:09: disabled
[118552.400681] e100 0000:02:08.0: PME# enabled
[118552.400691] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[118552.416287] Intel ICH Modem 0000:00:1f.6: PCI INT B disabled
[118552.432326] Intel ICH 0000:00:1f.5: PCI INT B disabled
[118552.432540] ata_piix 0000:00:1f.1: PCI INT A disabled
[118552.432550] pci 0000:00:02.0: PCI INT A disabled
[118552.433583] ACPI: Preparing to enter system sleep state S4
[118552.504091] PM: Saving platform NVS memory
[118552.504977] Disabling non-boot CPUs ...
[118552.505088] Extended CMOS year: 2000
[118552.505105] PM: Creating hibernation image:
[118552.508011] PM: Need to copy 121000 pages
[118552.508011] PM: Normal pages needed: 92623 + 1024, available pages: 175847
[118552.508011] PM: Restoring platform NVS memory
[118552.508011] Extended CMOS year: 2000
[118552.508011] ACPI: Waking up from system sleep state S4
[118552.780162] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x980007)
[118552.788071] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[118552.796070] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[118552.804069] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[118552.812070] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[118552.820071] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[118552.828070] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[118552.836069] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[118552.844069] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[118552.852070] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[118552.860070] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[118552.860132] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800003, writing 0x2800007)
[118552.860178] Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[118552.860218] yenta_cardbus 0000:02:00.0: restoring config space at offset 0xf (was 0x3c0010b, writing 0x5c0010b)
[118552.860236] yenta_cardbus 0000:02:00.0: restoring config space at offset 0x3 (was 0x24008, writing 0x2a808)
[118552.860243] yenta_cardbus 0000:02:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007)
[118552.876034] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x3808010b)
[118552.876050] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4208)
[118552.876057] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900117)
[118552.944502] pci 0000:00:02.0: power state changed by ACPI to D0
[118552.944548] pci 0000:00:02.0: power state changed by ACPI to D0
[118552.944560] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[118552.944566] pci 0000:00:02.0: setting latency timer to 64
[118552.944576] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[118552.944606] usb usb2: root hub lost power or was reset
[118552.944624] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[118552.944652] usb usb3: root hub lost power or was reset
[118552.944667] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[118552.944695] usb usb4: root hub lost power or was reset
[118552.944710] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[118552.944716] usb usb1: root hub lost power or was reset
[118552.948594] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[118552.948610] pci 0000:00:1e.0: setting latency timer to 64
[118552.948624] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[118552.948630] ata_piix 0000:00:1f.1: setting latency timer to 64
[118552.950734] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[118552.950760] Intel ICH 0000:00:1f.5: setting latency timer to 64
[118553.112649] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[118553.112655] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[118553.113118] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[118553.113123] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[118553.113129] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[118553.113135] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[118553.113819] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[118553.114783] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[118553.136449] ata2.00: configured for UDMA/33
[118553.136958] ata1.00: configured for UDMA/100
[118553.160705] ata1.00: configured for UDMA/100
[118553.160709] ata1: EH complete
[118553.962008] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[118553.962015] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[118555.104142] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[118555.104148] e100 0000:02:08.0: PME# disabled
[118555.104836] parport_pc 00:09: activated
[118555.236156] sd 0:0:0:0: [sda] Starting disk
[118555.256667] pci 0000:00:02.0: setting latency timer to 64
[118555.258061] PM: Image restored successfully.
[118555.258064] Restarting tasks ... done.
[118555.276824] PM: Basic memory bitmaps freed
[118559.797259] ADDRCONF(NETDEV_UP): eth0: link is not ready
[118559.800172] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[118559.800792] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[118570.624130] eth0: no IPv6 routers present
[122357.104134] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[122357.104146] render error detected, EIR: 0x00000000
[122357.104171] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 13672159 at 13672158)
[122359.408132] [drm:i915_gem_idle] *ERROR* hardware wedged
[122366.211604] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck
[122366.612133] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[122366.612142] render error detected, EIR: 0x00000000
[122366.612787] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 13672167 at 13672158)
[122368.660159] [drm:i915_gem_idle] *ERROR* hardware wedged
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: IBM ThinkPad R50e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: [40] Vendor Specific Information: Len=05 <?>
Kernel driver in use: agpgart-intel

00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: IBM ThinkPad R50e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: IBM ThinkPad R50e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA controller])
Subsystem: IBM ThinkPad R50e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: IBM ThinkPad R50e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: IBM ThinkPad
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbor


All times are GMT. The time now is 08:31 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.