Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#590090: linux-image-2.6.35-rc5-686: HP Compaq 6715s with radeon KMS does not shutdown anymore (http://www.linux-archive.org/debian-kernel/403254-bug-590090-linux-image-2-6-35-rc5-686-hp-compaq-6715s-radeon-kms-does-not-shutdown-anymore.html)

Patrick Matthäi 07-23-2010 03:22 PM

Bug#590090: linux-image-2.6.35-rc5-686: HP Compaq 6715s with radeon KMS does not shutdown anymore
 
Package: linux-2.6
Version: 2.6.35~rc5-1~experimental.1
Severity: important


Hello,

since I have updated from 2.6.34 from experimental to 2.6.35-rc5, my notebook does not shutdown anymore.
I am using KDE4 (and so on kdm). If I choose shutdown, kdm exits and then I can not do anything.
Switching to another console etc does not work and there is no shutdown :(

I am using the radeon driver with KMS (per default) enabled.


-- Package-specific info:
** Version:
Linux version 2.6.35-rc5-686 (Debian 2.6.35~rc5-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.4 (Debian 4.4.4-6) ) #1 SMP Tue Jul 13 16:16:00 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc5-686 root=UUID=fc14f80e-bb68-45b3-b227-b76e7d9349c1 ro quiet

** Not tainted

** Kernel log:
[ 9.399137] ACPI: AC Adapter [C1EB] (off-line)
[ 9.488311] ACPI: Battery Slot [C1ED] (battery present)
[ 9.488512] ACPI: Battery Slot [C1EC] (battery absent)
[ 9.525607] ACPI: WMI: Mapper loaded
[ 9.913968] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 9.971567] acpi device:01: registered as cooling_device6
[ 9.972392] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input4
[ 9.972450] ACPI: Video Device [C08D] (multi-head: yes rom: no post: no)
[ 9.991457] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
[ 9.991463] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 10.031984] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[ 10.104149] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8200, revision 0
[ 10.363810] cfg80211: Calling CRDA to update world regulatory domain
[ 10.371204] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 10.817300] b43-phy0: Broadcom 4311 WLAN found (core revision 13)
[ 11.355314] phy0: Selected rate control algorithm 'minstrel'
[ 11.356004] Registered led device: b43-phy0::tx
[ 11.356030] Registered led device: b43-phy0::rx
[ 11.356052] Registered led device: b43-phy0::radio
[ 11.356122] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 11.573387] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 11.573433] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 11.573445] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.632993] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7
[ 13.204665] Adding 971928k swap on /dev/sda2. Priority:-1 extents:1 across:971928k
[ 13.462621] EXT3-fs (sda3): using internal journal
[ 13.625575] loop: module loaded
[ 14.981640] fuse init (API version 7.14)
[ 16.443936] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 18.200398] apm: BIOS not found.
[ 19.676954] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 (2 cpu cores) (version 2.20.00)
[ 19.677023] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x12
[ 19.677026] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14
[ 19.677029] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1e
[ 20.173039] Clocksource tsc unstable (delta = -178542988 ns)
[ 22.256921] tg3 0000:10:00.0: irq 43 for MSI/MSI-X
[ 22.287685] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.764068] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 22.850434] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.798950] pci 0000:01:05.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 26.049163] [drm] Initialized drm 1.1.0 20060810
[ 26.342856] [drm] radeon kernel modesetting enabled.
[ 26.351239] [drm] initializing kernel modesetting (RS690 0x1002:0x791F).
[ 26.351447] [drm] register mmio base: 0xD0200000
[ 26.351453] [drm] register mmio size: 65536
[ 26.351800] ATOM BIOS: ATI
[ 26.351861] radeon 0000:01:05.0: VRAM: 128M 0x78000000 - 0x7FFFFFFF (128M used)
[ 26.351869] radeon 0000:01:05.0: GTT: 512M 0x80000000 - 0x9FFFFFFF
[ 26.352058] [drm] radeon: irq initialized.
[ 26.352445] [drm] Detected VRAM RAM=128M, BAR=128M
[ 26.352455] [drm] RAM width 128bits DDR
[ 26.353256] [TTM] Zone kernel: Available graphics memory: 443796 kiB.
[ 26.353263] [TTM] Zone highmem: Available graphics memory: 972024 kiB.
[ 26.353269] [TTM] Initializing pool allocator.
[ 26.353320] [drm] radeon: 128M of VRAM memory ready
[ 26.353326] [drm] radeon: 512M of GTT memory ready.
[ 26.353376] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 26.371089] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 26.391224] [drm] Loading RS690/RS740 Microcode
[ 26.472365] [drm] radeon: ring at 0x0000000080000000
[ 26.472395] [drm] ring test succeeded in 1 usecs
[ 26.472751] [drm] radeon: ib pool ready.
[ 26.472913] [drm] ib test succeeded in 0 usecs
[ 26.473034] [drm] Default TV standard: NTSC
[ 26.473322] [drm] Default TV standard: NTSC
[ 26.473406] [drm] Radeon Display Connectors
[ 26.473411] [drm] Connector 0:
[ 26.473415] [drm] VGA
[ 26.473422] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[ 26.473427] [drm] Encoders:
[ 26.473432] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 26.473437] [drm] Connector 1:
[ 26.473440] [drm] LVDS
[ 26.473447] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[ 26.473452] [drm] Encoders:
[ 26.473456] [drm] LCD1: INTERNAL_LVTM1
[ 26.473460] [drm] Connector 2:
[ 26.473464] [drm] S-video
[ 26.473468] [drm] Encoders:
[ 26.473472] [drm] TV1: INTERNAL_KLDSCP_DAC1
[ 26.529736] [drm] radeon: power management initialized
[ 27.135912] [drm] fb mappable at 0xC0040000
[ 27.135918] [drm] vram apper at 0xC0000000
[ 27.135922] [drm] size 4096000
[ 27.135927] [drm] fb depth is 24
[ 27.135931] [drm] pitch is 5120
[ 27.136458] Console: switching to colour frame buffer device 160x50
[ 27.136475] fb0: radeondrmfb frame buffer device
[ 27.136480] drm: registered panic notifier
[ 27.136488] Slow work thread pool: Starting up
[ 27.136605] Slow work thread pool: Ready
[ 27.136619] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0
[ 106.673839] wlan0: authenticate with 00:1f:3f:10:70:73 (try 1)
[ 106.675339] wlan0: authenticated
[ 106.675703] wlan0: associate with 00:1f:3f:10:70:73 (try 1)
[ 106.678860] wlan0: RX AssocResp from 00:1f:3f:10:70:73 (capab=0x411 status=0 aid=1)
[ 106.678871] wlan0: associated
[ 106.680639] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 106.755066] padlock: VIA PadLock not detected.
[ 117.360041] wlan0: no IPv6 routers present

** Model information
not available

** Loaded modules:
Module Size Used by
aes_i586 7176 2
aes_generic 26723 1 aes_i586
radeon 616284 1
ttm 46995 1 radeon
drm_kms_helper 23707 1 radeon
drm 143179 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 4026 1 radeon
powernow_k8 11394 1
mperf 1179 1 powernow_k8
cpufreq_powersave 682 0
cpufreq_userspace 1703 0
cpufreq_stats 2257 0
cpufreq_conservative 7744 1
uinput 5059 1
fuse 49756 1
loop 10863 0
snd_hda_codec_analog 52325 1
snd_hda_intel 18797 1
snd_hda_codec 70970 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 4408 1 snd_hda_codec
snd_pcm_oss 28040 0
snd_mixer_oss 10670 1 snd_pcm_oss
snd_pcm 57079 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
arc4 1057 2
ecb 1475 2
snd_seq_midi 3998 0
snd_rawmidi 15712 1 snd_seq_midi
snd_seq_midi_event 5101 1 snd_seq_midi
snd_seq 38600 2 snd_seq_midi,snd_seq_midi_event
b43 140474 0
snd_timer 14813 2 snd_pcm,snd_seq
snd_seq_device 4816 3 snd_seq_midi,snd_rawmidi,snd_seq
rng_core 2912 1 b43
mac80211 147621 1 b43
snd 44392 13 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,s nd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_raw midi,snd_seq,snd_timer,snd_seq_device
joydev 7137 0
hp_wmi 4439 0
cfg80211 113616 2 b43,mac80211
i2c_piix4 7723 0
i2c_core 18039 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
rfkill 13690 2 hp_wmi,cfg80211
tpm_tis 6546 0
tpm 11821 1 tpm_tis
tpm_bios 4225 1 tpm
video 16979 0
k8temp 2807 0
soundcore 5386 1 snd
output 1647 1 video
wmi 6751 1 hp_wmi
snd_page_alloc 6256 2 snd_hda_intel,snd_pcm
led_class 2301 1 b43
serio_raw 3190 0
battery 4628 0
ac 1846 0
processor 27831 1 powernow_k8
shpchp 23331 0
psmouse 43066 0
container 1998 0
button 4474 0
pci_hotplug 20657 1 shpchp
evdev 5954 21
ext3 96850 1
jbd 37883 1 ext3
mbcache 5436 1 ext3
sg 16784 0
sd_mod 28350 3
sr_mod 11256 0
cdrom 28530 1 sr_mod
crc_t10dif 1195 1 sd_mod
ata_generic 2343 0
ahci 17433 0
libahci 16751 3 ahci
pata_atiixp 2996 0
ssb 37710 1 b43
ohci_hcd 17239 0
libata 143944 4 ata_generic,ahci,libahci,pata_atiixp
ehci_hcd 28753 0
fan 2759 0
mmc_core 49141 2 b43,ssb
usbcore 121253 3 ohci_hcd,ehci_hcd
scsi_mod 151927 4 sg,sr_mod,sd_mod,libata
pcmcia 29419 2 b43,ssb
tg3 98067 0
thermal 10520 0
pcmcia_core 12525 1 pcmcia
libphy 18100 1 tg3
thermal_sys 11304 4 video,processor,fan,thermal
nls_base 5877 1 usbcore

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
#allow-hotplug eth0
#iface eth0 inet dhcp


** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:1a:4b:5d:54:53 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:1a:73:6f:57:8e brd ff:ff:ff:ff:ff:ff
inet 192.168.0.26/24 brd 192.168.0.255 scope global wlan0
inet6 fe80::21a:73ff:fe6f:578e/64 scope link
valid_lft forever preferred_lft forever

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 6240 108 0 0 0 0 0 0 6240 108 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 5311327 5459 0 0 0 0 0 0 857227 4960 0 0 0 0 0 0

*** Protocol statistics:
Ip:
5501 total packets received
0 forwarded
0 incoming packets discarded
5490 incoming packets delivered
4995 requests sent out
2 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
169 active connections openings
0 passive connection openings
54 failed connection attempts
14 connection resets received
15 connections established
5235 segments received
4724 segments send out
11 segments retransmited
0 bad segments received.
152 resets sent
Udp:
297 packets received
0 packets to unknown port received.
0 packet receive errors
302 packets sent
UdpLite:
TcpExt:
21 TCP sockets finished time wait in fast timer
229 delayed acks sent
Quick ack mode was activated 2 times
2 packets directly queued to recvmsg prequeue.
2 bytes directly received in process context from prequeue
3346 packet headers predicted
261 acknowledgments not containing data payload received
169 predicted acknowledgments
5 congestion windows recovered without slow start after partial ack
10 other TCP timeouts
2 DSACKs sent for old packets
11 DSACKs received
3 connections reset due to unexpected data
13 connections reset due to early user close
TCPDSACKIgnoredOld: 4
TCPDSACKIgnoredNoUndo: 5
IpExt:
InBcastPkts: 1
InOctets: 5237313
OutOctets: 700259
InBcastOctets: 576

*** Device features:
eth0: 0x49a3
lo: 0x13865
wlan0: 0x2000

** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64

00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0200000-d03fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:04.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:7914] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
Memory behind bridge: d0000000-d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: cc000000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=30, subordinate=30, sec-latency=0
Memory behind bridge: c8000000-c80fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 9008 [size=4]
Region 2: I/O ports at 9010 [size=8]
Region 3: I/O ports at 5018 [size=4]
Region 4: I/O ports at 5020 [size=16]
Region 5: Memory at d0409000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0401000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0402000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at d0403000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at d0405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 23
Region 0: Memory at d0406000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8200 [size=16]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus

00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 82 [Master PriP])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 5040 [size=16]
Kernel driver in use: pata_atiixp

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at 84000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=03, sec-latency=64
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: 80000000-83ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=128M]
Region 2: Memory at d0200000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 4000 [size=256]
Region 5: Memory at d0300000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon

02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6)
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 88000000-8bfff000 (prefetchable)
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001

10:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3

30:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 02)
Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN [103c:1371]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge


** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (200, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.35-rc5-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.35-rc5-686 depends on:
ii debconf [deb 1.5.33 Debian configuration management sy
ii initramfs-to 0.97.2 tools for generating an initramfs
ii linux-base 2.6.35~rc5-1~experimental.1 Linux image base package
ii module-init- 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.35-rc5-686 recommends:
ii firmware-lin 2.6.35~rc5-1~experimental.1 Binary firmware for various driver
ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.35-rc5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.35 <none> (no description available)

Versions of packages linux-image-2.6.35-rc5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.26 Binary firmware for various driver
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.35-rc5-686/prerm/removing-running-kernel-2.6.35-rc5-686: true
linux-image-2.6.35-rc5-686/prerm/would-invalidate-boot-loader-2.6.35-rc5-686: true
linux-image-2.6.35-rc5-686/postinst/bootloader-error-2.6.35-rc5-686:
linux-image-2.6.35-rc5-686/postinst/depmod-error-initrd-2.6.35-rc5-686: false
linux-image-2.6.35-rc5-686/postinst/bootloader-test-error-2.6.35-rc5-686:
* linux-image-2.6.35-rc5-686/postinst/missing-firmware-2.6.35-rc5-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100723152206.3104.32462.reportbug@gnu">http://lists.debian.org/20100723152206.3104.32462.reportbug@gnu


All times are GMT. The time now is 01:40 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.