Package: linux-2.6
Version: 2.6.32-17
Severity: normal


xserver-xorg-video-intel > 2.9.1 can't be tested with debian kernels (i've tried 2.6.34 and 2.6.35-rc5 from experimental)

Version 2.12 work with sidux kernel which have KMS enabled for i915.

My Xorg.0.log:

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-amd64 i686 Debian
Current Operating System: Linux thana-portable 2.6.32-5-686 #1 SMP Sun Jul 11 02:12:03 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=8515365c-124e-4e18-ad10-e5df0c80e4b2 ro quiet init=/sbin/bootchartd splash
Build Date: 15 July 2010 04:10:53PM
xorg-server 2:1.7.7-3 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.18.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 17 13:32:07 2010
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81eaca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2592:1025:008f Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0000000/262144, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2792:1025:008f Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x44c00000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.12.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(EE) intel(0): No kernel modesetting driver detected.
(II) UnloadModule: "intel"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.



-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-17) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Sun Jul 11 02:12:03 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=8515365c-124e-4e18-ad10-e5df0c80e4b2 ro quiet init=/sbin/bootchartd splash

** Not tainted

** Kernel log:
[ 2.982889] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.982894] EXT4-fs (sda1): write access will be enabled during recovery
[ 8.820356] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 8.820366] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3763
[ 8.820461] EXT4-fs (sda1): 1 orphan inode deleted
[ 8.820465] EXT4-fs (sda1): recovery complete
[ 9.006885] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 13.708756] udev: starting version 160
[ 14.576888] ACPI: AC Adapter [ACAD] (on-line)
[ 14.595653] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 14.596315] Marking TSC unstable due to TSC halts in idle
[ 14.598447] processor LNXCPU:00: registered as cooling_device0
[ 14.611953] Switching to clocksource hpet
[ 14.925802] name_count maxed, losing inode data: dev=00:05, inode=3558
[ 14.925874] name_count maxed, losing inode data: dev=00:05, inode=1474
[ 14.925880] name_count maxed, losing inode data: dev=00:05, inode=1474
[ 14.925942] name_count maxed, losing inode data: dev=00:05, inode=1474
[ 14.925947] name_count maxed, losing inode data: dev=00:05, inode=1474
[ 14.987334] ACPI: WMI: Mapper loaded
[ 15.306308] lib80211: common routines for IEEE802.11 drivers
[ 15.306312] lib80211_crypt: registered algorithm 'NULL'
[ 15.330713] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000/0x0
[ 15.368848] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 15.432451] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 15.432457] ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI region SMBI [0x18e0-0x18ef]
[ 15.432576] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.488176] ACPI Warning for \_SB_.BAT1._BST: Return Package type mismatch at index 2 - found [NULL Object Descriptor], expected Integer (20090903/nspredef-1012)
[ 15.684195] ACPI: Battery Slot [BAT1] (battery present)
[ 15.801466] intel_rng: FWH not detected
[ 15.826019] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 15.826023] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 16.460659] yenta_cardbus 0000:06:01.0: CardBus bridge found [1025:008f]
[ 16.460681] yenta_cardbus 0000:06:01.0: Enabling burst memory read transactions
[ 16.460688] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI
[ 16.460691] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI
[ 16.460697] yenta_cardbus 0000:06:01.0: TI: mfunc 0x01111112, devctl 0x66
[ 16.460724] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 16.460741] acer-wmi: No or unsupported WMI interface, unable to load
[ 16.460861] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 16.460864] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 16.692939] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0cf8, PCI irq 18
[ 16.692944] yenta_cardbus 0000:06:01.0: Socket status: 30000006
[ 16.692949] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #08
[ 16.692960] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 16.692965] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[ 16.693215] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
[ 16.693219] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[ 16.693873] ipw2200 0000:06:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 16.695234] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 16.695286] ipw2200 0000:06:04.0: firmware: requesting ipw2200-bss.fw
[ 17.422987] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 18.088690] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.088722] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 18.308543] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 18.310304] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 18.311069] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 18.311706] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 18.313225] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 18.580834] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 28.519561] Adding 996020k swap on /dev/sda3. Priority:-1 extents:1 across:996020k
[ 29.057381] name_count maxed, losing inode data: dev=00:05, inode=4
[ 29.058007] name_count maxed, losing inode data: dev=00:07, inode=8
[ 29.058011] name_count maxed, losing inode data: dev=00:07, inode=5198
[ 29.058023] name_count maxed, losing inode data: dev=00:05, inode=4
[ 29.058028] name_count maxed, losing inode data: dev=00:05, inode=4
[ 29.058697] name_count maxed, losing inode data: dev=00:07, inode=8
[ 29.058701] name_count maxed, losing inode data: dev=00:07, inode=5203
[ 29.058718] name_count maxed, losing inode data: dev=00:05, inode=4
[ 29.058723] name_count maxed, losing inode data: dev=00:05, inode=4
[ 29.059354] name_count maxed, losing inode data: dev=00:07, inode=8
[ 29.059358] name_count maxed, losing inode data: dev=00:07, inode=5208
[ 29.059370] name_count maxed, losing inode data: dev=00:05, inode=4
[ 29.059376] name_count maxed, losing inode data: dev=00:05, inode=4
[ 29.060054] name_count maxed, losing inode data: dev=00:07, inode=8
[ 29.060058] name_count maxed, losing inode data: dev=00:07, inode=5213
[ 29.060070] name_count maxed, losing inode data: dev=00:05, inode=4
[ 29.060076] name_count maxed, losing inode data: dev=00:05, inode=4
[ 29.060724] name_count maxed, losing inode data: dev=00:07, inode=8
[ 29.060728] name_count maxed, losing inode data: dev=00:07, inode=5218
[ 29.060734] loop: module loaded
[ 36.983901] kjournald starting. Commit interval 5 seconds
[ 36.984263] EXT3 FS on sda2, internal journal
[ 36.984268] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.134974] kjournald starting. Commit interval 5 seconds
[ 37.135354] EXT3 FS on sda4, internal journal
[ 37.135359] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.176602] fuse init (API version 7.13)
[ 38.570824] lp: driver loaded but no devices found
[ 38.592829] ppdev: user-space parallel port driver
[ 38.853700] eth0: link down
[ 38.854356] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.325645] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 41.023855] eth0: link down
[ 41.024169] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.142748] Program wdm tried to access /dev/mem between 100000->102000.
[ 46.445744] eth0: link down
[ 46.446272] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 51.610592] type=1305 audit(1279366337.993:40783): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
[ 51.987753] lib80211_crypt: registered algorithm 'CCMP'
[ 52.362963] padlock: VIA PadLock not detected.

** Model information
not available

** Loaded modules:
Module Size Used by
aes_i586 6816 2
aes_generic 25738 1 aes_i586
lib80211_crypt_ccmp 3643 2
acpi_cpufreq 4943 0
cpufreq_stats 1940 0
cpufreq_conservative 4018 1
cpufreq_userspace 1480 0
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
cpufreq_powersave 602 0
uinput 4796 1
fuse 43758 1
ext3 94204 2
jbd 32169 1 ext3
loop 9757 0
snd_hda_codec_realtek 163226 1
snd_hda_intel 16787 0
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm 47214 2 snd_hda_intel,snd_hda_codec
pcmcia 17442 0
snd_seq 35463 0
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 1 snd_seq
yenta_socket 16403 1
ipw2200 108368 0
rsrc_nonstatic 7057 1 yenta_socket
snd 34363 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec, snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
rfkill 10264 0
libipw 18439 1 ipw2200
led_class 1757 0
soundcore 3450 1 snd
i2c_i801 6462 0
joydev 6771 0
rng_core 2178 0
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
lib80211 2870 3 lib80211_crypt_ccmp,ipw2200,libipw
pcmcia_core 20450 3 pcmcia,yenta_socket,rsrc_nonstatic
serio_raw 2916 0
wmi 3575 0
battery 3782 0
evdev 5609 16
psmouse 44657 0
pcspkr 1207 0
processor 26599 2 acpi_cpufreq
ac 1640 0
ext4 254973 1
mbcache 3762 2 ext3,ext4
jbd2 56091 1 ext4
crc16 1027 1 ext4
sg 15968 0
usbhid 27980 0
hid 50645 1 usbhid
sr_mod 10770 0
sd_mod 25869 5
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
i915 220208 0
drm_kms_helper 18305 1 i915
ata_generic 2019 0
drm 112020 2 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
uhci_hcd 16057 0
ata_piix 17640 5
8139too 14949 0
i2c_core 12696 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
libata 115721 2 ata_generic,ata_piix
thermal 9206 0
8139cp 13421 0
mii 2714 2 8139too,8139cp
video 14605 1 i915
ehci_hcd 27851 0
scsi_mod 101401 4 sg,sr_mod,sd_mod,libata
thermal_sys 9378 3 processor,thermal,video
output 1204 1 video
usbcore 98402 4 usbhid,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
button 3598 1 i915

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at b0000000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>

00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at 44c00000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d000c000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 44000000-441fffff
Prefetchable memory behind bridge: 0000000044200000-00000000443fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 44400000-445fffff
Prefetchable memory behind bridge: 0000000044600000-00000000447fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 44800000-449fffff
Prefetchable memory behind bridge: 0000000044a00000-0000000044bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=08, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: b0100000-b01fffff
Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18e0 [size=32]

06:01.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
Subsystem: Acer Incorporated [ALI] Device [1025:008f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=08, sec-latency=176
Memory window 0: 40000000-43fff000 (prefetchable)
Memory window 1: 48000000-4bfff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

06:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
Subsystem: Intel Corporation Device [8086:2701]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at b0101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200

06:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at b0102000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c521 Logitech, Inc. Cordless Mouse Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (900, 'unstable'), (800, 'testing'), (500, 'experimental'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy
ii initramfs-tools [linux-initra 0.97.2 tools for generating an initramfs
ii linux-base 2.6.32-17 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-lin 2.6.35~rc5-1~experimental.1 Binary firmware for various driver
ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
ii firmware-ipw2x00 0.26 Binary firmware for Intel Pro Wire
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.26 Binary firmware for various driver
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100717114638.3534.27294.reportbug@thana-portable">http://lists.debian.org/20100717114638.3534.27294.reportbug@thana-portable