FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 07-10-2010, 07:37 PM
Moritz Muehlenhoff
 
Default Bug#530557: linux-image-2.6.26-2-686: segfault when cat or view files under /proc/megaraid/hba0 to check status

tags 530557 moreinfo
thanks

On Mon, May 25, 2009 at 02:12:37PM -0400, Douglas A. Tutty wrote:
> Package: linux-image-2.6.26-2-686
> Version: 2.6.26-15lenny2
> Severity: normal
>
> On up-to-date Etch, I could check the status of my raid array by viewing
> or catting files under /proc/megaraid. On Lenny (with the 1.6.26
> kernel), I get a segfault the first time (per boot) but subsequent tries
> result in a hung process. The process is immortal, it cannot be killed,
> not even by init on shutdown.
>
> The raid card is a HP NetRaid 1Si.

Hi,
The next release of Debian (6.0, code name Squeeze) will be based
on 2.6.32. Please test the current 2.6.32 from unstable/testing and tell
us whether the problem persists. If so, we should report it upstream
to the kernel.org developers.

The 2.6.32 kernel is available from packages.debian.org and can
be installed in both Debian stable, testing and unstable
installations.

Thanks,
Moritz



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100710193731.GA5223@galadriel.inutil.org">http://lists.debian.org/20100710193731.GA5223@galadriel.inutil.org
 
Old 07-13-2010, 11:55 PM
"Douglas A. Tutty"
 
Default Bug#530557: linux-image-2.6.26-2-686: segfault when cat or view files under /proc/megaraid/hba0 to check status

It seems to work OK.

I got the linux-image .deb and dpkg -i'd it but it also needed
linux-base, so I got that too. dpkg -i'd it, but it needed
libuuid-perl. That exists in Etch so aptitude was able to fix things by
installing that from etch.

I then rebooted and tested catting the files under /proc/megaraid.

I'll attach the dmesg and the contents of those files. Note that the
driver still can't get the cache data and assumnes write-through. This
is a good assumption (since I have that set on the raid card), but it is
only an assumption. If the card had a battery-backup, I may have the
cache set differently.

Thanks for your help.

Doug.




On Sat, Jul 10, 2010 at 09:37:31PM +0200, Moritz Muehlenhoff wrote:
> tags 530557 moreinfo
> thanks
>
> On Mon, May 25, 2009 at 02:12:37PM -0400, Douglas A. Tutty wrote:
> > Package: linux-image-2.6.26-2-686
> > Version: 2.6.26-15lenny2
> > Severity: normal
> >
> > On up-to-date Etch, I could check the status of my raid array by viewing
> > or catting files under /proc/megaraid. On Lenny (with the 1.6.26
> > kernel), I get a segfault the first time (per boot) but subsequent tries
> > result in a hung process. The process is immortal, it cannot be killed,
> > not even by init on shutdown.
> >
> > The raid card is a HP NetRaid 1Si.
>
> Hi,
> The next release of Debian (6.0, code name Squeeze) will be based
> on 2.6.32. Please test the current 2.6.32 from unstable/testing and tell
> us whether the problem persists. If so, we should report it upstream
> to the kernel.org developers.
>
> The 2.6.32 kernel is available from packages.debian.org and can
> be installed in both Debian stable, testing and unstable
> installations.
>
> Thanks,
> Moritz
>
Battery Status:[9] Module Missing Pack Missing
v2.00.4 (Release Date: Thu Feb 9 08:51:30 EST 2006)
Controller Type: 438/466/467/471/493/518/520/531/532
Controller is not using 64-bit memory addressing
Base = f7c88000, Irq = 17, Logical Drives = 2, Channels = 1
Version =F :B , DRAM = 16Mb
Controller Queue Depth = 254, Driver Queue Depth = 126
support_ext_cdb = 0
support_random_del = 0
boot_ldrv_enabled = 1
boot_ldrv = 0
boot_pdrv_enabled = 0
boot_pdrv_ch = 0
boot_pdrv_tgt = 0
quiescent = 0
has_cluster = 0

Module Parameters:
max_cmd_per_lun = 63
max_sectors_per_io = 128
Channel: 0 Id: 0 State: Online.
Vendor: HP Model: 36.4GB C 80-D94N Rev: D94N
Type: Direct-Access ANSI SCSI revision: 02
Channel: 0 Id: 1 State: Online.
Vendor: HP Model: 36.4GB C 80-D94N Rev: D94N
Type: Direct-Access ANSI SCSI revision: 02
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003ffffc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffffc00 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffe9400 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.1 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 37dcb000 - 37fefac5
[ 0.000000] Allocated new RAMDISK: 00100000 - 00324ac5
[ 0.000000] Move RAMDISK from 0000000037dcb000 - 0000000037fefac4 to 00100000 - 00324ac4
[ 0.000000] ACPI: RSDP 000f72c0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 3fffde8f 00030 (v01 HP HWPC203 00000001 LTP 00000000)
[ 0.000000] ACPI: FACP 3ffffb13 00074 (v01 HP HWPC203 00000002 PTL 001E8480)
[ 0.000000] ACPI: DSDT 3fffdebf 01C54 (v01 HP HWPC203 00000001 MSFT 0100000A)
[ 0.000000] ACPI: FACS 3fffffc0 00040
[ 0.000000] ACPI: APIC 3ffffb87 00052 (v01 PTLTD APIC 00000001 LTP 00000001)
[ 0.000000] ACPI: BOOT 3ffffbd9 00027 (v01 PTLTD $SBFTBL$ 00000001 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 139MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==> [0001000000 - 00014c3154]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00014c4000 - 00014ca170] BRK ==> [00014c4000 - 00014ca170]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000100000 - 0000324ac5] NEW RAMDISK ==> [0000100000 - 0000324ac5]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f7330] f7330
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c13ae680, node_mem_map c14cc200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 280 pages used for memmap
[ 0.000000] HighMem zone: 35546 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ea000
[ 0.000000] PM: Registered nosave memory: 00000000000ea000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34136 r0 d23208 u2097152
[ 0.000000] pcpu-alloc: s34136 r0 d23208 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: root=LABEL=root ro apm=power-off
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003fff0)
[ 0.000000] Memory: 1031372k/1048512k available (2490k kernel code, 16252k reserved, 1318k data, 372k init, 143304k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB)
[ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 449.246 MHz processor.
[ 0.004022] Calibrating delay loop (skipped), value calculated using timer frequency.. 898.49 BogoMIPS (lpj=1796984)
[ 0.004230] Security Framework initialized
[ 0.004325] SELinux: Disabled at boot.
[ 0.004422] Mount-cache hash table entries: 512
[ 0.005259] Initializing cgroup subsys ns
[ 0.005335] Initializing cgroup subsys cpuacct
[ 0.005412] Initializing cgroup subsys devices
[ 0.005480] Initializing cgroup subsys freezer
[ 0.005546] Initializing cgroup subsys net_cls
[ 0.005714] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.005819] CPU: L2 cache: 512K
[ 0.005890] mce: CPU supports 5 MCE banks
[ 0.006026] Performance Events: p6 PMU driver.
[ 0.006146] ... version: 0
[ 0.006207] ... bit width: 32
[ 0.006269] ... generic registers: 2
[ 0.006331] ... value mask: 00000000ffffffff
[ 0.006396] ... max period: 000000007fffffff
[ 0.006461] ... fixed-purpose events: 0
[ 0.006522] ... event mask: 0000000000000003
[ 0.008034] Checking 'hlt' instruction... OK.
[ 0.027771] ACPI: Core revision 20090903
[ 0.035941] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.037657] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.040001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.040001] ..... (found apic 0 pin 2) ...
[ 0.040001] ....... failed.
[ 0.040001] ...trying to set up timer as Virtual Wire IRQ...
[ 0.081223] ..... works.
[ 0.081285] CPU0: Intel Pentium II (Deschutes) stepping 02
[ 0.084001] Booting processor 1 APIC 0x0 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.008000] CPU: L2 cache: 512K
[ 0.172151] CPU1: Intel Pentium II (Deschutes) stepping 02
[ 0.172514] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176348] Brought up 2 CPUs
[ 0.176432] Total of 2 processors activated (1797.04 BogoMIPS).
[ 0.177936] CPU0 attaching sched-domain:
[ 0.177954] domain 0: span 0-1 level CPU
[ 0.177968] groups: 0 1
[ 0.177994] CPU1 attaching sched-domain:
[ 0.178007] domain 0: span 0-1 level CPU
[ 0.178020] groups: 1 0
[ 0.178445] devtmpfs: initialized
[ 0.181367] regulator: core version 0.5
[ 0.181367] NET: Registered protocol family 16
[ 0.181367] ACPI: bus type pci registered
[ 0.199629] PCI: PCI BIOS revision 2.10 entry at 0xfdb02, last bus=2
[ 0.199703] PCI: Using configuration type 1 for base access
[ 0.201750] bio: create slab <bio-0> at 0
[ 0.204393] ACPI: EC: Look up EC in DSDT
[ 0.242172] ACPI: Interpreter enabled
[ 0.242285] ACPI: (supports S0)
[ 0.242416] ACPI: Using IOAPIC for interrupt routing
[ 0.304154] ACPI: No dock devices found.
[ 0.309382] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.309660] pci 0000:00:00.0: reg 10 32bit mmio pref: [0x000000-0xfffffff]
[ 0.309896] pci 0000:00:04.1: reg 20 io port: [0x1020-0x102f]
[ 0.310008] pci 0000:00:04.2: reg 20 io port: [0x1000-0x101f]
[ 0.310081] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.310089] * this clock source is slow. Consider trying other clock sources
[ 0.310297] pci 0000:00:04.3: quirk: region 8000-803f claimed by PIIX4 ACPI
[ 0.310375] pci 0000:00:04.3: quirk: region 1040-104f claimed by PIIX4 SMB
[ 0.310631] pci 0000:00:08.0: reg 10 32bit mmio: [0xfa000000-0xfa000fff]
[ 0.310708] pci 0000:00:08.0: PME# supported from D0 D1 D3hot D3cold
[ 0.310784] pci 0000:00:08.0: PME# disabled
[ 0.310912] pci 0000:00:08.1: reg 10 32bit mmio: [0xfa001000-0xfa001fff]
[ 0.310987] pci 0000:00:08.1: PME# supported from D0 D1 D3hot D3cold
[ 0.311062] pci 0000:00:08.1: PME# disabled
[ 0.311189] pci 0000:00:08.2: reg 10 32bit mmio: [0xfa002000-0xfa002fff]
[ 0.311264] pci 0000:00:08.2: PME# supported from D0 D1 D3hot D3cold
[ 0.311339] pci 0000:00:08.2: PME# disabled
[ 0.311474] pci 0000:00:08.3: reg 10 32bit mmio: [0xfa004000-0xfa0040ff]
[ 0.311554] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
[ 0.311628] pci 0000:00:08.3: PME# disabled
[ 0.311840] pci 0000:00:09.1: reg 10 32bit mmio pref: [0xfa010000-0xfa01ffff]
[ 0.311907] pci 0000:00:09.1: reg 30 32bit mmio pref: [0x000000-0x007fff]
[ 0.312035] pci 0000:00:0d.0: reg 10 32bit mmio pref: [0xfc000000-0xfdffffff]
[ 0.312060] pci 0000:00:0d.0: reg 14 32bit mmio: [0xfa003000-0xfa003fff]
[ 0.312106] pci 0000:00:0d.0: reg 30 32bit mmio pref: [0x000000-0x007fff]
[ 0.312259] pci 0000:01:03.0: reg 10 32bit mmio pref: [0xfa500000-0xfa500fff]
[ 0.312285] pci 0000:01:03.0: reg 14 io port: [0x9400-0x941f]
[ 0.312309] pci 0000:01:03.0: reg 18 32bit mmio: [0xfa100000-0xfa1fffff]
[ 0.312353] pci 0000:01:03.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]
[ 0.312447] pci 0000:01:04.0: reg 10 io port: [0x9000-0x90ff]
[ 0.312472] pci 0000:01:04.0: reg 14 32bit mmio: [0xfa201000-0xfa2010ff]
[ 0.312496] pci 0000:01:04.0: reg 18 32bit mmio: [0xfa200000-0xfa200fff]
[ 0.312623] pci 0000:00:07.0: bridge io port: [0x9000-0x9fff]
[ 0.312642] pci 0000:00:07.0: bridge 32bit mmio: [0xfa100000-0xfa2fffff]
[ 0.312665] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfa500000-0xfa5fffff]
[ 0.312813] pci_bus 0000:00: on NUMA node 0
[ 0.312841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.313426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.318878] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.319929] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.321002] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.322052] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.323093] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.324028] vgaarb: loaded
[ 0.324309] PCI: Using ACPI for IRQ routing
[ 0.325014] Switching to clocksource tsc
[ 0.331279] pnp: PnP ACPI init
[ 0.331415] ACPI: bus type pnp registered
[ 0.498328] pnp: PnP ACPI: found 14 devices
[ 0.498399] ACPI: ACPI bus type pnp unregistered
[ 0.498472] PnPBIOS: Disabled by ACPI PNP
[ 0.498596] system 00:05: iomem range 0xfffd0000-0xfffeffff could not be reserved
[ 0.534796] pci 0000:01:03.0: BAR 6: can't allocate mem resource [0xfa600000-0xfa5fffff]
[ 0.534889] pci 0000:00:07.0: PCI bridge, secondary bus 0000:01
[ 0.534962] pci 0000:00:07.0: IO window: 0x9000-0x9fff
[ 0.535035] pci 0000:00:07.0: MEM window: 0xfa100000-0xfa2fffff
[ 0.535110] pci 0000:00:07.0: PREFETCH window: 0x000000fa500000-0x000000fa5fffff
[ 0.535199] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.535266] pci 0000:00:09.0: IO window: disabled
[ 0.535336] pci 0000:00:09.0: MEM window: disabled
[ 0.535404] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.535521] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.535538] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.535555] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.535571] pci_bus 0000:01: resource 1 mem: [0xfa100000-0xfa2fffff]
[ 0.535587] pci_bus 0000:01: resource 2 pref mem [0xfa500000-0xfa5fffff]
[ 0.535772] NET: Registered protocol family 2
[ 0.536377] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.538807] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.544632] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.547728] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.547818] TCP reno registered
[ 0.548466] NET: Registered protocol family 1
[ 0.548625] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.548924] pci 0000:00:0d.0: Boot video device
[ 0.548957] pci 0000:01:03.0: Firmware left e100 interrupts enabled; disabling
[ 0.549338] Unpacking initramfs...
[ 0.880507] Freeing initrd memory: 2194k freed
[ 0.893395] Simple Boot Flag at 0x35 set to 0x1
[ 0.894827] audit: initializing netlink socket (disabled)
[ 0.894953] type=2000 audit(1279064414.894:1): initialized
[ 0.895979] highmem bounce pool size: 64 pages
[ 0.896070] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.906685] VFS: Disk quotas dquot_6.5.2
[ 0.907137] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.907703] msgmni has been set to 1739
[ 0.909292] alg: No test for stdrng (krng)
[ 0.909562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.909653] io scheduler noop registered
[ 0.909716] io scheduler anticipatory registered
[ 0.909780] io scheduler deadline registered
[ 0.910158] io scheduler cfq registered (default)
[ 0.911142] isapnp: Scanning for PnP cards...
[ 1.265628] isapnp: No Plug & Play device found
[ 1.276318] Linux agpgart interface v0.103
[ 1.277125] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.277449] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.277868] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.278373] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[ 1.279513] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.280133] 00:0a: ttyS3 at I/O 0x2e8 (irq = 10) is a 16550A
[ 1.280824] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.281692] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.284762] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.284861] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.285363] mice: PS/2 mouse device common for all mice
[ 1.285895] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.286039] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.286181] cpuidle: using governor ladder
[ 1.286248] cpuidle: using governor menu
[ 1.286328] No iBFT detected.
[ 1.288836] TCP cubic registered
[ 1.290003] NET: Registered protocol family 10
[ 1.293081] lo: Disabled Privacy Extensions
[ 1.295252] Mobile IPv6
[ 1.295322] NET: Registered protocol family 17
[ 1.295461] Using IPI No-Shortcut mode
[ 1.296050] PM: Resume from disk failed.
[ 1.296089] registered taskstats version 1
[ 1.296953] rtc_cmos 00:02: setting system clock to 2010-07-13 23:40:16 UTC (1279064416)
[ 1.297187] Initalizing network drop monitor service
[ 1.297404] Freeing unused kernel memory: 372k freed
[ 1.299558] Write protecting the kernel text: 2492k
[ 1.299742] Write protecting the kernel read-only data: 916k
[ 1.303621] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.624604] SCSI subsystem initialized
[ 1.645058] megaraid_legacy 0000:00:09.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.645166] megaraid: found 0x8086:0x1960:bus 0:slot 9:func 1
[ 1.645585] scsi0:Found MegaRAID controller at 0xf7c88000, IRQ:17
[ 1.722104] megaraid: [F :B ] detected 2 logical drives.
[ 1.800225] megaraid: channel[0] is raid.
[ 1.859945] scsi0 : LSI Logic MegaRAID F 254 commands 16 targs 4 chans 7 luns
[ 1.861671] scsi0: scanning scsi channel 0 for logical drives.
[ 1.862491] scsi 0:0:0:0: Direct-Access MegaRAID LD0 RAID1 21000R F PQ: 0 ANSI: 2
[ 1.863558] scsi 0:0:1:0: Direct-Access MegaRAID LD1 RAID0 27462R F PQ: 0 ANSI: 2
[ 1.875956] scsi0: scanning scsi channel 4 [P0] for physical devices.
[ 5.817202] sd 0:0:0:0: [sda] 43008000 512-byte logical blocks: (22.0 GB/20.5 GiB)
[ 5.817409] sd 0:0:0:0: [sda] Write Protect is off
[ 5.817485] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 5.817584] sd 0:0:0:0: [sda] Asking for cache data failed
[ 5.817658] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.818110] sd 0:0:1:0: [sdb] 56242176 512-byte logical blocks: (28.7 GB/26.8 GiB)
[ 5.818439] sd 0:0:0:0: [sda] Asking for cache data failed
[ 5.818518] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.818598] sda: sda1 sda2 sda3 sda4 <
[ 5.819726] sd 0:0:1:0: [sdb] Write Protect is off
[ 5.819847] sd 0:0:1:0: [sdb] Mode Sense: 00 00 00 00
[ 5.820402] sd 0:0:1:0: [sdb] Asking for cache data failed
[ 5.820477] sd 0:0:1:0: [sdb] Assuming drive cache: write through
[ 5.821333] sd 0:0:1:0: [sdb] Asking for cache data failed
[ 5.821409] sd 0:0:1:0: [sdb] Assuming drive cache: write through
[ 5.821483] sdb: sda5 sdb1 sdb2
[ 5.829809] sd 0:0:1:0: [sdb] Asking for cache data failed
[ 5.829885] sd 0:0:1:0: [sdb] Assuming drive cache: write through
[ 5.829957] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 5.837891] sda6 >
[ 5.840307] sd 0:0:0:0: [sda] Asking for cache data failed
[ 5.840382] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.840455] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.775298] JFS: nTxBlock = 8081, nTxLock = 64648
[ 9.268938] udevd version 125 started
[ 12.912609] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 15.061398] usbcore: registered new interface driver usbfs
[ 15.061645] usbcore: registered new interface driver hub
[ 15.081615] usbcore: registered new device driver usb
[ 15.169897] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.257834] Floppy drive(s): fd0 is 1.44M
[ 15.287397] FDC 0 is a National Semiconductor PC87306
[ 15.345897] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.681598] uhci_hcd: USB Universal Host Controller Interface driver
[ 15.682003] uhci_hcd 0000:00:04.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 15.682114] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 15.682368] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 15.682594] uhci_hcd 0000:00:04.2: irq 19, io base 0x00001000
[ 15.682939] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 15.683025] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.683115] usb usb1: Product: UHCI Host Controller
[ 15.683189] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 15.683264] usb usb1: SerialNumber: 0000:00:04.2
[ 15.683832] usb usb1: configuration #1 chosen from 1 choice
[ 15.720187] hub 1-0:1.0: USB hub found
[ 15.720324] hub 1-0:1.0: 2 ports detected
[ 15.753104] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 15.753302] ohci_hcd 0000:00:08.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.753438] ohci_hcd 0000:00:08.0: OHCI Host Controller
[ 15.753563] ohci_hcd 0000:00:08.0: new USB bus registered, assigned bus number 2
[ 15.753747] ohci_hcd 0000:00:08.0: irq 17, io mem 0xfa000000
[ 15.814211] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 15.814313] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.814414] usb usb2: Product: OHCI Host Controller
[ 15.814489] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 15.814568] usb usb2: SerialNumber: 0000:00:08.0
[ 15.815236] usb usb2: configuration #1 chosen from 1 choice
[ 15.815513] hub 2-0:1.0: USB hub found
[ 15.815656] hub 2-0:1.0: 2 ports detected
[ 15.816077] ohci_hcd 0000:00:08.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 15.816227] ohci_hcd 0000:00:08.1: OHCI Host Controller
[ 15.817358] ohci_hcd 0000:00:08.1: new USB bus registered, assigned bus number 3
[ 15.817570] ohci_hcd 0000:00:08.1: irq 18, io mem 0xfa001000
[ 15.824111] hub 1-0:1.0: over-current change on port 1
[ 15.863904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 15.863998] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 15.884850] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 15.884940] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.885024] usb usb3: Product: OHCI Host Controller
[ 15.885099] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 15.885175] usb usb3: SerialNumber: 0000:00:08.1
[ 15.885792] usb usb3: configuration #1 chosen from 1 choice
[ 15.886072] hub 3-0:1.0: USB hub found
[ 15.886208] hub 3-0:1.0: 2 ports detected
[ 15.886703] ehci_hcd 0000:00:08.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.886876] ehci_hcd 0000:00:08.3: EHCI Host Controller
[ 15.887012] ehci_hcd 0000:00:08.3: new USB bus registered, assigned bus number 4
[ 15.887237] ehci_hcd 0000:00:08.3: debug port 1
[ 15.909224] ehci_hcd 0000:00:08.3: irq 16, io mem 0xfa004000
[ 15.921290] ehci_hcd 0000:00:08.3: USB 2.0 started, EHCI 1.00
[ 15.921555] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.921645] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.921737] usb usb4: Product: EHCI Host Controller
[ 15.921818] usb usb4: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 15.921895] usb usb4: SerialNumber: 0000:00:08.3
[ 15.922498] usb usb4: configuration #1 chosen from 1 choice
[ 15.922808] hub 4-0:1.0: USB hub found
[ 15.922930] hub 4-0:1.0: 6 ports detected
[ 15.923418] ohci_hcd 0000:00:08.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 15.923591] ohci_hcd 0000:00:08.2: OHCI Host Controller
[ 15.923726] ohci_hcd 0000:00:08.2: new USB bus registered, assigned bus number 5
[ 15.923895] ohci_hcd 0000:00:08.2: irq 19, io mem 0xfa002000
[ 15.928100] hub 1-0:1.0: over-current change on port 2
[ 16.158530] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 16.158626] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.158708] usb usb5: Product: OHCI Host Controller
[ 16.158777] usb usb5: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 16.158845] usb usb5: SerialNumber: 0000:00:08.2
[ 16.159460] usb usb5: configuration #1 chosen from 1 choice
[ 16.159769] hub 5-0:1.0: USB hub found
[ 16.159892] hub 5-0:1.0: 2 ports detected
[ 16.649100] libata version 3.00 loaded.
[ 17.721366] piix4_smbus 0000:00:04.3: Host SMBus controller not enabled!
[ 17.972990] processor LNXCPU:00: registered as cooling_device0
[ 17.973349] processor LNXCPU:01: registered as cooling_device1
[ 18.150938] parport_pc 00:0b: reported by Plug and Play ACPI
[ 18.151085] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 18.284802] ata_piix 0000:00:04.1: version 2.13
[ 18.301421] scsi1 : ata_piix
[ 18.313158] scsi2 : ata_piix
[ 18.313557] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1020 irq 14
[ 18.313639] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1028 irq 15
[ 18.344238] ata2: port disabled. ignoring.
[ 18.508600] ata1.00: ATAPI: CD-ROM CDR_U240, 1.09, max MWDMA2
[ 18.524426] ata1.00: configured for MWDMA2
[ 18.526045] scsi 1:0:0:0: CD-ROM TORiSAN CD-ROM CDR_U240 1.09 PQ: 0 ANSI: 5
[ 19.013810] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 19.013915] e100: Copyright(c) 1999-2006 Intel Corporation
[ 19.014181] e100 0000:01:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 19.407412] e100: eth0: e100_probe: addr 0xfa500000, irq 19, MAC addr 00:a0:c9:dd:5f:e2
[ 19.407642] sym53c8xx 0000:01:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 19.565278] sym0: <895> rev 0x1 at pci 0000:01:04.0 irq 18
[ 19.707972] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 20.054201] sym0: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
[ 20.054289] sym0: open drain IRQ line driver, using on-chip SRAM
[ 20.054357] sym0: using LOAD/STORE-based firmware.
[ 20.056025] sym0: SCSI BUS has been reset.
[ 20.061171] sym0: SCSI BUS mode change from SE to SE.
[ 20.061205] scsi3 : sym-2.2.3
[ 20.063509] sym0: SCSI BUS has been reset.
[ 20.516979] Error: Driver 'pcspkr' is already registered, aborting...
[ 22.761590] sr0: scsi3-mmc drive: 10x/23x xa/form2 cdda tray
[ 22.761687] Uniform CD-ROM driver Revision: 3.20
[ 22.762335] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 23.054001] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.054337] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 23.054637] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 25.928776] loop: module loaded
[ 26.129740] lp0: using parport0 (interrupt-driven).
[ 26.579855] device-mapper: uevent: version 1.0.3
[ 26.580865] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 28.251537] padlock: VIA PadLock not detected.
[ 30.156628] padlock: VIA PadLock Hash Engine not detected.
[ 54.234698] Adding 489972k swap on /dev/mapper/sda2_crypt. Priority:-1 extents:1 across:489972k
[ 57.222059] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 57.576675] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 58.082522] Netfilter messages via NETLINK v0.30.
[ 58.337487] nf_conntrack version 0.5.0 (16162 buckets, 64648 max)
[ 58.341299] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 58.341318] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 58.341331] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 60.758577] ctnetlink v0.93: registering with nfnetlink.
[ 62.136871] ClusterIP Version 0.8 loaded successfully
[ 95.954665] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 110.624360] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
Contents of Mail Box Structure
Fw Command = 0x02
Cmd Sequence = 0x7a
No of Sectors= 0008
LBA = 0xeeba7
DTA = 0x36620000
Logical Drive= 0x00
No of SG Elmt= 0x00
Busy = 0
Status = 0x00
Logical drive: 0:, state: optimal
Span depth: 1, RAID level: 1, Stripe size: 64, Row size: 2
Read Policy: Adaptive, Write Policy: Write thru, Cache Policy: Cached IO

Logical drive: 1:, state: optimal
Span depth: 0, RAID level: 0, Stripe size:128, Row size: 0
Read Policy: No read ahead, Write Policy: Write thru, Cache Policy: Cached IO

Rebuild Rate: [50%]
Statistical Information for this controller
pend_cmds = 0
IO and error counters not compiled in driver.
 

Thread Tools




All times are GMT. The time now is 12:48 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org