FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 07-08-2010, 08:36 AM
Vincent Danjean
 
Default Bug#588426: linux-image-2.6.32-5-amd64: fail to boot in a kvm virtual machine

Package: linux-2.6
Version: 2.6.32-16
Severity: important

Hi,

I tried to install linux-image-2.6.32-5-amd64/2.6.32-16 in a kvm virtual
machine. With this kernel, it fails to boot. The virtual machine freeze after
the line:
[ 0.324387] Write protecting the kernel read-only data: 4220k
(see below the full boot log taken from a serial console)
I tried to boot both with a serial console (attached to a tty in the host)
and with a vga video emulated screen. Same things happened.

The kvm machine is a lenny with a few package from unstable

Regards,
Vincent

PS: the severity can be increased if lots of people experiments the same thing
or lowered if this is specific to my configuration.

-- Package-specific info:
[log of a boot with a serial console with linux-image-2.6.32-5-amd64/2.6.32-16]

Booting a command list

Loading Linux 2.6.32-5-amd64 ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-16) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jul 6 14:14:38 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/ran-root ro console=ttyS0,9600n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffb000 (usable)
[ 0.000000] BIOS-e820: 000000001fffb000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x1fffb max_arch_pfn = 0x400000000
[ 0.000000] PAT not supported by CPU.
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fffb000
[ 0.000000] RAMDISK: 17cf4000 - 1803b6c6
[ 0.000000] ACPI: RSDP 00000000000f8940 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000001fffde30 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000001ffffe70 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000001fffdfd0 01E22 (v01 BXPC BXDSDT 00000001 INTL 20090123)
[ 0.000000] ACPI: FACS 000000001ffffe00 00040
[ 0.000000] ACPI: SSDT 000000001fffdf90 00037 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000001fffdeb0 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000001fffde70 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000001fffb000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000001fffb000
[ 0.000000] NODE_DATA [0000000000009000 - 0000000000010fff]
[ 0.000000] bootmap [0000000000011000 - 0000000000014fff] pages 4
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001fffb000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001684754] TEXT DATA BSS ==> [0001000000 - 0001684754]
[ 0.000000] #3 [0017cf4000 - 001803b6c6] RAMDISK ==> [0017cf4000 - 001803b6c6]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0001685000 - 0001685071] BRK ==> [0001685000 - 0001685071]
[ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] found SMP MP-table at [ffff8800000f8990] f8990
[ 0.000000] kvm-clock: cpu 0, msr 0:14ed701, boot clock
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fffb
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dffbc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u2097152
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] kvm-clock: cpu 0, msr 0:1815701, primary cpu clock
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129077
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/ran-root ro console=ttyS0,9600n8
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 505220k/524268k available (3067k kernel code, 388k absent, 18660k reserved, 1887k data, 588k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Detected 2399.828 MHz processor.
[ 0.024001] Calibrating delay loop (skipped) preset value.. 4799.65 BogoMIPS (lpj=9599312)
[ 0.024001] Security Framework initialized
[ 0.024001] SELinux: Disabled at boot.
[ 0.024061] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.025894] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.027354] Mount-cache hash table entries: 256
[ 0.028410] Initializing cgroup subsys ns
[ 0.029076] Initializing cgroup subsys cpuacct
[ 0.029763] Initializing cgroup subsys devices
[ 0.030481] Initializing cgroup subsys freezer
[ 0.031165] Initializing cgroup subsys net_cls
[ 0.032088] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.032884] CPU: L2 cache: 4096K
[ 0.033435] CPU 0/0x0 -> Node 0
[ 0.033914] mce: CPU supports 10 MCE banks
[ 0.034688] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
[ 0.036568] SMP alternatives: switching to UP code
[ 0.124899] Freeing SMP alternatives: 28k freed
[ 0.125637] ACPI: Core revision 20090903
[ 0.127344] Setting APIC routing to flat
[ 0.129829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.130842] CPU0: Intel QEMU Virtual CPU version 0.12.4 stepping 03
[ 0.136001] Brought up 1 CPUs
[ 0.136001] Total of 1 processors activated (4799.65 BogoMIPS).
[ 0.136001] devtmpfs: initialized
[ 0.137978] regulator: core version 0.5
[ 0.138695] NET: Registered protocol family 16
[ 0.140118] PCI: Using configuration type 1 for base access
[ 0.141522] bio: create slab <bio-0> at 0
[ 0.145091] ACPI: Interpreter enabled
[ 0.145716] ACPI: (supports S0 S3 S4 S5)
[ 0.146478] ACPI: Using IOAPIC for interrupt routing
[ 0.150132] ACPI: No dock devices found.
[ 0.150807] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.153739] pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
[ 0.154899] pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
[ 0.180020] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.181953] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.184041] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.185753] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.188203] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.191177] vgaarb: loaded
[ 0.192378] PCI: Using ACPI for IRQ routing
[ 0.194575] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.196007] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.204073] Switching to clocksource kvm-clock
[ 0.207990] pnp: PnP ACPI init
[ 0.208654] ACPI: bus type pnp registered
[ 0.210913] pnp: PnP ACPI: found 6 devices
[ 0.212251] ACPI: ACPI bus type pnp unregistered
[ 0.219099] NET: Registered protocol family 2
[ 0.220479] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.223112] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.225629] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.227485] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.228641] TCP reno registered
[ 0.229311] NET: Registered protocol family 1
[ 0.230091] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.231118] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.232136] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.233328] Unpacking initramfs...
[ 0.341424] Freeing initrd memory: 3357k freed
[ 0.344303] audit: initializing netlink socket (disabled)
[ 0.345540] type=2000 audit(1278576652.344:1): initialized
[ 0.352015] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.355247] VFS: Disk quotas dquot_6.5.2
[ 0.356256] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.357799] msgmni has been set to 993
[ 0.359044] alg: No test for stdrng (krng)
[ 0.360064] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.361677] io scheduler noop registered
[ 0.362543] io scheduler anticipatory registered
[ 0.363573] io scheduler deadline registered
[ 0.364583] io scheduler cfq registered (default)
[ 0.367858] Linux agpgart interface v0.103
[ 0.368851] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.370658] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.372476] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.374228] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.376927] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.378119] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.379431] mice: PS/2 mouse device common for all mice
[ 0.381254] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.383565] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.385163] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.386701] cpuidle: using governor ladder
[ 0.387623] cpuidle: using governor menu
[ 0.388523] No iBFT detected.
[ 0.389559] TCP cubic registered
[ 0.390469] NET: Registered protocol family 10
[ 0.392257] lo: Disabled Privacy Extensions
[ 0.393505] Mobile IPv6
[ 0.394066] NET: Registered protocol family 17
[ 0.395205] registered taskstats version 1
[ 0.396761] rtc_cmos 00:01: setting system clock to 2010-07-08 08:10:52 UTC (1278576652)
[ 0.398539] Initalizing network drop monitor service
[ 0.399764] Freeing unused kernel memory: 588k freed
[ 0.401412] Write protecting the kernel read-only data: 4220k


[log of a boot with a serial console with linux-image-2.6.32-5-amd64
reverted to 2.6.32-15]

Booting a command list

Loading Linux 2.6.32-5-amd64 ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/ran-root ro console=ttyS0,9600n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffb000 (usable)
[ 0.000000] BIOS-e820: 000000001fffb000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x1fffb max_arch_pfn = 0x400000000
[ 0.000000] PAT not supported by CPU.
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fffb000
[ 0.000000] RAMDISK: 17cf4000 - 1803b6c9
[ 0.000000] ACPI: RSDP 00000000000f8940 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000001fffde30 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000001ffffe70 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000001fffdfd0 01E22 (v01 BXPC BXDSDT 00000001 INTL 20090123)
[ 0.000000] ACPI: FACS 000000001ffffe00 00040
[ 0.000000] ACPI: SSDT 000000001fffdf90 00037 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000001fffdeb0 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000001fffde70 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000001fffb000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000001fffb000
[ 0.000000] NODE_DATA [0000000000009000 - 0000000000010fff]
[ 0.000000] bootmap [0000000000011000 - 0000000000014fff] pages 4
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001fffb000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001680314] TEXT DATA BSS ==> [0001000000 - 0001680314]
[ 0.000000] #3 [0017cf4000 - 001803b6c9] RAMDISK ==> [0017cf4000 - 001803b6c9]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0001681000 - 0001681071] BRK ==> [0001681000 - 0001681071]
[ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] found SMP MP-table at [ffff8800000f8990] f8990
[ 0.000000] kvm-clock: cpu 0, msr 0:14eb5c1, boot clock
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fffb
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dffbc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001800000 s90008 r8192 d20584 u2097152
[ 0.000000] pcpu-alloc: s90008 r8192 d20584 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] kvm-clock: cpu 0, msr 0:18155c1, primary cpu clock
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129077
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/ran-root ro console=ttyS0,9600n8
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 505240k/524268k available (3060k kernel code, 388k absent, 18640k reserved, 1885k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Detected 2399.828 MHz processor.
[ 0.024001] Calibrating delay loop (skipped) preset value.. 4799.65 BogoMIPS (lpj=9599312)
[ 0.024001] Security Framework initialized
[ 0.024001] SELinux: Disabled at boot.
[ 0.024058] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.025723] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.027068] Mount-cache hash table entries: 256
[ 0.028341] Initializing cgroup subsys ns
[ 0.029024] Initializing cgroup subsys cpuacct
[ 0.029771] Initializing cgroup subsys devices
[ 0.030471] Initializing cgroup subsys freezer
[ 0.031176] Initializing cgroup subsys net_cls
[ 0.032113] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.032914] CPU: L2 cache: 4096K
[ 0.033410] CPU 0/0x0 -> Node 0
[ 0.033956] mce: CPU supports 10 MCE banks
[ 0.034704] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
[ 0.036046] SMP alternatives: switching to UP code
[ 0.124501] Freeing SMP alternatives: 28k freed
[ 0.125278] ACPI: Core revision 20090903
[ 0.126865] Setting APIC routing to flat
[ 0.129714] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.130737] CPU0: Intel QEMU Virtual CPU version 0.12.4 stepping 03
[ 0.132001] Brought up 1 CPUs
[ 0.132001] Total of 1 processors activated (4799.65 BogoMIPS).
[ 0.132001] devtmpfs: initialized
[ 0.134131] regulator: core version 0.5
[ 0.134897] NET: Registered protocol family 16
[ 0.135759] ACPI: bus type pci registered
[ 0.136160] PCI: Using configuration type 1 for base access
[ 0.137513] bio: create slab <bio-0> at 0
[ 0.141183] ACPI: Interpreter enabled
[ 0.141820] ACPI: (supports S0 S3 S4 S5)
[ 0.142598] ACPI: Using IOAPIC for interrupt routing
[ 0.146193] ACPI: No dock devices found.
[ 0.146890] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.149850] pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
[ 0.151053] pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
[ 0.177149] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.178906] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.180560] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.182291] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.184571] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.186545] vgaarb: loaded
[ 0.187660] PCI: Using ACPI for IRQ routing
[ 0.188872] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.190193] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.196070] Switching to clocksource kvm-clock
[ 0.200000] pnp: PnP ACPI init
[ 0.200245] ACPI: bus type pnp registered
[ 0.202532] pnp: PnP ACPI: found 6 devices
[ 0.203604] ACPI: ACPI bus type pnp unregistered
[ 0.209925] NET: Registered protocol family 2
[ 0.211237] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.213543] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.215700] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.217732] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.219353] TCP reno registered
[ 0.220264] NET: Registered protocol family 1
[ 0.221419] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.222955] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.224388] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.226158] Unpacking initramfs...
[ 0.331386] Freeing initrd memory: 3357k freed
[ 0.333439] audit: initializing netlink socket (disabled)
[ 0.334400] type=2000 audit(1278576834.332:1): initialized
[ 0.336257] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.338487] VFS: Disk quotas dquot_6.5.2
[ 0.339212] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.340376] msgmni has been set to 993
[ 0.341254] alg: No test for stdrng (krng)
[ 0.342078] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.343282] io scheduler noop registered
[ 0.343919] io scheduler anticipatory registered
[ 0.344698] io scheduler deadline registered
[ 0.345421] io scheduler cfq registered (default)
[ 0.350181] Linux agpgart interface v0.103
[ 0.350889] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.352212] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.353480] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.354780] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.356761] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.357563] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.358499] mice: PS/2 mouse device common for all mice
[ 0.359748] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.361456] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.362599] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.363712] cpuidle: using governor ladder
[ 0.364395] cpuidle: using governor menu
[ 0.365032] No iBFT detected.
[ 0.365773] TCP cubic registered
[ 0.366424] NET: Registered protocol family 10
[ 0.367639] lo: Disabled Privacy Extensions
[ 0.368553] Mobile IPv6
[ 0.368966] NET: Registered protocol family 17
[ 0.369794] registered taskstats version 1
[ 0.370892] rtc_cmos 00:01: setting system clock to 2010-07-08 08:13:53 UTC (1278576833)
[ 0.372247] Initalizing network drop monitor service
[ 0.373161] Freeing unused kernel memory: 584k freed
[ 0.374310] Write protecting the kernel read-only data: 4208k
Loading, please wait...
[ 0.432596] udev: starting version 158
[ 0.601629] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.602652] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[ 0.730089] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.731066] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[ 0.774789] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.775741] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 0.866491] vda: vda1 vda2 vda3 vda4
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... [ 0.969755] device-mapper: uevent: version 1.0.3
[ 0.971601] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
done.
Begin: Running /scripts/local-premount ... done.
[ 1.144046] EXT4-fs (dm-0): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 1.513649] udev: starting version 158
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 2.527255] SCSI subsystem initialized
[ 2.580888] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[ 2.591120] usbcore: registered new interface driver usbfs
[ 2.592170] usbcore: registered new interface driver hub
[ 2.602943] usbcore: registered new device driver usb
[ 2.665518] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.666611] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[ 2.667990] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 2.791772] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 2.876185] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c020
[ 2.877200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.878516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.879935] usb usb1: Product: UHCI Host Controller
[ 2.880935] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 2.882072] usb usb1: SerialNumber: 0000:00:01.2
[ 3.118051] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 3.160186] usb usb1: configuration #1 chosen from 1 choice
[ 3.176033] hub 1-0:1.0: USB hub found
[ 3.176679] hub 1-0:1.0: 2 ports detected
[ 3.185431] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.204595] FDC 0 is a S82078B
[ 3.208129] ACPI: Power Button [PWRF]
[ 3.222062] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.228263] processor LNXCPU:00: registered as cooling_device0
[ 3.585727] scsi0 : ata_piix
[ 3.604515] Error: Driver 'pcspkr' is already registered, aborting...
[ 3.624073] scsi1 : ata_piix
[ 3.624793] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 3.626122] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
done.
@Activating swap...[ 4.675731] Adding 524280k swap on /dev/vda3. Priority:-1 extents:1 across:524280k
done.
Checking root file system...fsck from util-linux-ng 2.17.2
ran_ROOTFS: clean, 42968/196608 files, 408259/786432 blocks
done.
Cleaning up ifupdown....
Loading kernel modules...[ 4.991857] loop: module loaded
done.
Setting up LVM Volume Groups Reading all physical volumes. This may take a while...
Found volume group "ran" using metadata type lvm2
2 logical volume(s) in volume group "ran" now active
.
Checking file systems...fsck from util-linux-ng 2.17.2
ran_BOOTFS: clean, 431/12048 files, 25468/48128 blocks
ran_HOMEFS: clean, 733/65536 files, 118776/262144 blocks
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...[ 5.352266] kjournald starting. Commit interval 5 seconds
[ 5.363948] EXT3 FS on vda2, internal journal
[ 5.364710] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.382994] EXT4-fs (dm-1): mounted filesystem with ordered data mode
done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

Listening on LPF/eth0/06:a4:a9:60:01:00
Sending on LPF/eth0/06:a4:a9:60:01:00
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
DHCPOFFER from 10.77.16.1
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 10.77.16.1
bound to 10.77.16.2 -- renewal in 1388 seconds.
done.
Setting console screen modes and fonts.
cannot (un)set powersave mode
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting OpenBSD Secure Shell server: sshd.
Starting MySQL database server: mysqld.
Checking for corrupt, not cleanly closed and upgrade needing tables..
Starting mail-transfer-agent: nullmailer.
Starting periodic command scheduler: crond.
Starting web server: apache2[Thu Jul 08 10:14:03 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
.
Starting Munin-Node: done.

Debian GNU/Linux 5.0 ran ttyS0

ran login:

** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/ran-root ro console=ttyS0,9600n8

** Not tainted

** Kernel log:
[see above]

** Model information
sys_vendor: Bochs
product_name: Bochs
product_version:
chassis_vendor: Bochs
chassis_version:
bios_vendor: Bochs
bios_version: Bochs

** Loaded modules:
Module Size Used by
ext3 106518 1
jbd 37085 1 ext3
loop 11783 0
ata_piix 21012 0
ata_generic 2983 0
snd_pcsp 6579 0
processor 30231 0
button 4650 0
floppy 49087 0
libata 133520 2 ata_piix,ata_generic
uhci_hcd 18521 0
virtio_net 10529 0
psmouse 49777 0
tpm_tis 7336 0
snd_pcm 60471 1 snd_pcsp
i2c_piix4 8328 0
usbcore 121959 2 uhci_hcd
snd_timer 15582 1 snd_pcm
serio_raw 3752 0
evdev 7352 0
tpm 9917 1 tpm_tis
tpm_bios 4521 1 tpm
scsi_mod 122117 1 libata
nls_base 6361 1 usbcore
virtio_balloon 2961 0
i2c_core 15712 1 i2c_piix4
snd 46446 3 snd_pcsp,snd_pcm,snd_timer
soundcore 4598 1 snd
snd_page_alloc 6249 1 snd_pcm
ext4 285611 2
mbcache 5050 2 ext3,ext4
jbd2 66919 1 ext4
crc16 1319 1 ext4
dm_mod 53754 6
virtio_blk 4225 4
thermal 11674 0
thermal_sys 11942 2 processor,thermal
virtio_pci 5535 0
virtio_ring 3258 1 virtio_pci
virtio 3309 4 virtio_net,virtio_balloon,virtio_blk,virtio_pci

** Network interface configuration:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 06:a4:a9:60:01:00 brd ff:ff:ff:ff:ff:ff
inet 10.77.16.2/24 brd 10.77.16.255 scope global eth0
inet6 fe80::4a4:a9ff:fe60:100/64 scope link
valid_lft forever preferred_lft forever

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 37670 421 0 0 0 0 0 0 144496 379 0 0 0 0 0 0

*** Protocol statistics:
Ip:
401 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
399 incoming packets delivered
359 requests sent out
Icmp:
12 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo requests: 12
12 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
echo replies: 12
IcmpMsg:
InType8: 12
OutType0: 12
Tcp:
2 active connections openings
10 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
376 segments received
341 segments send out
0 segments retransmited
0 bad segments received.
2 resets sent
Udp:
6 packets received
0 packets to unknown port received.
0 packet receive errors
6 packets sent
UdpLite:
TcpExt:
5 TCP sockets finished time wait in fast timer
16 delayed acks sent
211 packets directly queued to recvmsg prequeue.
1656 bytes directly received in process context from prequeue
20 packet headers predicted
90 packets header predicted and directly queued to user
99 acknowledgments not containing data payload received
134 predicted acknowledgments
IpExt:
InMcastPkts: 5
InOctets: 31146
OutOctets: 137814
InMcastOctets: 160

*** Device features:
eth0: 0x220
lo: 0x13865

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
Subsystem: Qumranet, Inc. Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
Subsystem: Qumranet, Inc. Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] (prog-if 80 [Master])
Subsystem: Qumranet, Inc. Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at c000 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic

00:01.2 USB Controller [0c03]: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] [8086:7020] (rev 01) (prog-if 00 [UHCI])
Subsystem: Qumranet, Inc. Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at c020 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
Subsystem: Qumranet, Inc. Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4

00:02.0 VGA compatible controller [0300]: Technical Corp. Device [1234:1111] (prog-if 00 [VGA controller])
Subsystem: Qumranet, Inc. Device [1af4:1100]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled]

00:03.0 RAM memory [0500]: Qumranet, Inc. Virtio memory balloon [1af4:1002]
Subsystem: Qumranet, Inc. Device [1af4:0005]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c040 [size=32]
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci

00:04.0 SCSI storage controller [0100]: Qumranet, Inc. Virtio block device [1af4:1001]
Subsystem: Qumranet, Inc. Device [1af4:0002]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c080 [size=64]
Region 1: Memory at f1000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI-X: Enable+ Count=2 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci

00:05.0 Ethernet controller [0200]: Qumranet, Inc. Virtio network device [1af4:1000]
Subsystem: Qumranet, Inc. Device [1af4:0001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c0c0 [size=32]
Region 1: Memory at f1001000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f1008000 [disabled] [size=32K]
Capabilities: [40] MSI-X: Enable+ Count=3 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci


** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

-- System Information:
Debian Release: 5.0.5
APT prefers stable
APT policy: (990, 'stable'), (500, 'unstable'), (500, 'testing'), (1, 'experi$
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf 1.5.24 Debian configuration management sy
ii initramfs-tools 0.97.2 tools for generating an initramfs
ii linux-base 2.6.34-1~experimental.2 Linux image base package
ii module-init-tool 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-f 2.6.34-1~experimental.2 Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-61 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64:$



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100708083647.11551.386.reportbug@eyak.vpn.danjea n.fr">http://lists.debian.org/20100708083647.11551.386.reportbug@eyak.vpn.danjea n.fr
 

Thread Tools




All times are GMT. The time now is 12:57 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org