FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 07-05-2010, 11:52 AM
Bruno Boettcher
 
Default Bug#588140: linux-image-2.6.32-5-amd64: can't install: dpkg: error processing linux-image-2.6-amd64

Package: linux-2.6
Version: 2.6.32-15
Severity: normal


Hello

i have quite a fear at the moment about rebooting my comp, since i don't know if it will get up again...

an upgrade run gives the following:
Setting up initramfs-tools (0.97) ...
update-initramfs: deferring update (trigger activated)
Setting up linux-image-2.6.26-2-amd64 (2.6.26-24) ...
Running depmod.
Running mkinitramfs-kpkg.
Deprecation WARNING: use update-initramfs(8)
mkinitramfs-kpkg failed to create initrd image.
Failed to create initrd image.
dpkg: error processing linux-image-2.6.26-2-amd64 (--configure):
subprocess installed post-installation script returned error exit status 9
Setting up linux-image-2.6.32-5-amd64 (2.6.32-15) ...
Running depmod.
Running update-initramfs.
update-initramfs: Generating /boot/initrd.img-2.6.32-5-amd64
update-initramfs: failed for /boot/initrd.img-2.6.32-5-amd64
update-initramfs failed to create initrd image.
Failed to create initrd image.
dpkg: error processing linux-image-2.6.32-5-amd64 (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of linux-image-2.6-amd64:
linux-image-2.6-amd64 depends on linux-image-2.6.32-5-amd64; however:
Package linux-image-2.6.32-5-amd64 is not configured yet.
dpkg: error processing linux-image-2.6-amd64 (--configure):
dependency problems - leaving unconfigured
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.32-trunk-amd64
update-initramfs: failed for /boot/initrd.img-2.6.32-trunk-amd64
dpkg: error processing initramfs-tools (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.26-2-amd64
linux-image-2.6.32-5-amd64
linux-image-2.6-amd64
initramfs-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)

this problem persists since some weeks now...

ciao
Bruno


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 2002
board_vendor: ASUSTeK Computer INC.
board_name: P5Q
board_version: Rev 1.xx

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at a800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at a880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ac00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe7f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0000000-f03fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at a080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at a400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at a480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000f0800000-00000000f08fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 8c00 [size=4]
Region 2: I/O ports at 8880 [size=8]
Region 3: I/O ports at 8800 [size=4]
Region 4: I/O ports at 8480 [size=16]
Region 5: I/O ports at 8400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7ff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]

00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at 9880 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9480 [size=16]
Region 5: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon HD 3600 Series [1002:9598] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:01da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at b000 [size=256]
Expansion ROM at fe8c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci

01:00.1 Audio device [0403]: ATI Technologies Inc RV635 Audio device [Radeon HD 3600 Series] [1002:aa20]
Subsystem: ASUSTeK Computer Inc. Device [1043:aa20]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe8fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

02:00.0 Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8226]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at cc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E

03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell

05:01.0 RAID bus controller [0104]: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249] (rev 50)
Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at ec00 [size=16]
Region 1: I/O ports at e880 [size=16]
Region 2: I/O ports at e800 [size=16]
Region 3: I/O ports at e480 [size=16]
Region 4: I/O ports at e400 [size=32]
Region 5: I/O ports at e000 [size=256]
Expansion ROM at f0800000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: sata_via

05:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. IEEE 1394a Firewire Controller [1043:8294]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febef000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci


** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 0d62:a100 Darfon Electronics Corp. Optical Mouse
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 0463:ffff MGE UPS Systems UPS
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 0471:0329 Philips (or NXP) SPC 900NC PC Camera / ORITE CCD Webcam(PC370R)
Bus 003 Device 002: ID 093a:2600 Pixart Imaging, Inc. Typhoon Easycam USB 330K (newer)/Typhoon Easycam USB 2.0 VGA 1.3M/Sansun SN-508
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 012: ID 152d:2336 JMicron Technology Corp. / JMicron USA Technology Corp. Hard Disk Drive
Bus 002 Device 008: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard
Bus 002 Device 007: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Bus 002 Device 006: ID 04b8:0131 Seiko Epson Corp.
Bus 002 Device 004: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
pn initramfs-tools | linux-initr <none> (no description available)
ii linux-base 2.6.32-15 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-15 Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100705115226.25609.26537.reportbug@hayate.bboett .free.fr">http://lists.debian.org/20100705115226.25609.26537.reportbug@hayate.bboett .free.fr
 
Old 07-05-2010, 12:12 PM
maximilian attems
 
Default Bug#588140: linux-image-2.6.32-5-amd64: can't install: dpkg: error processing linux-image-2.6-amd64

On Mon, Jul 05, 2010 at 01:52:26PM +0200, Bruno Boettcher wrote:
> Package: linux-2.6
> Version: 2.6.32-15
> Severity: normal

wrong package, but who reads text one copies and pastes?


> Hello
>
> i have quite a fear at the moment about rebooting my comp, since i don't know if it will get up again...

yep.

> an upgrade run gives the following:
> Setting up initramfs-tools (0.97) ...
> update-initramfs: deferring update (trigger activated)
> Setting up linux-image-2.6.26-2-amd64 (2.6.26-24) ...
> Running depmod.
> Running mkinitramfs-kpkg.
> Deprecation WARNING: use update-initramfs(8)
> mkinitramfs-kpkg failed to create initrd image.

so here we have the failure.

> Failed to create initrd image.
> dpkg: error processing linux-image-2.6.26-2-amd64 (--configure):
> subprocess installed post-installation script returned error exit status 9
> Setting up linux-image-2.6.32-5-amd64 (2.6.32-15) ...
> Running depmod.
> Running update-initramfs.
> update-initramfs: Generating /boot/initrd.img-2.6.32-5-amd64
> update-initramfs: failed for /boot/initrd.img-2.6.32-5-amd64
> update-initramfs failed to create initrd image.
> Failed to create initrd image.
> dpkg: error processing linux-image-2.6.32-5-amd64 (--configure):
> subprocess installed post-installation script returned error exit status 2
> dpkg: dependency problems prevent configuration of linux-image-2.6-amd64:
> linux-image-2.6-amd64 depends on linux-image-2.6.32-5-amd64; however:
> Package linux-image-2.6.32-5-amd64 is not configured yet.
> dpkg: error processing linux-image-2.6-amd64 (--configure):
> dependency problems - leaving unconfigured
> Processing triggers for initramfs-tools ...
> update-initramfs: Generating /boot/initrd.img-2.6.32-trunk-amd64
> update-initramfs: failed for /boot/initrd.img-2.6.32-trunk-amd64
> dpkg: error processing initramfs-tools (--configure):
> subprocess installed post-installation script returned error exit status 1
> Errors were encountered while processing:
> linux-image-2.6.26-2-amd64
> linux-image-2.6.32-5-amd64
> linux-image-2.6-amd64
> initramfs-tools
> E: Sub-process /usr/bin/dpkg returned an error code (1)
>

please provide output of:
cat /etc/initramfs-tools/initramfs.conf

and

dpkg -l iscan*



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100705121232.GP9869@baikonur.stro.at">http://lists.debian.org/20100705121232.GP9869@baikonur.stro.at
 
Old 07-05-2010, 04:36 PM
Bruno Boettcher
 
Default Bug#588140: linux-image-2.6.32-5-amd64: can't install: dpkg: error processing linux-image-2.6-amd64

On Mon, Jul 05, 2010 at 02:12:32PM +0200, maximilian attems wrote:
> wrong package, but who reads text one copies and pastes?
hmmm i did but i was unsure whose fault it is this time ....

> yep.
yes i am right to fear? or yes it will start up again?

> > mkinitramfs-kpkg failed to create initrd image.
so for future reference i should have posted the bug for that program?
just for my culture, how do i find to which package that one belongs?

> please provide output of:
> cat /etc/initramfs-tools/initramfs.conf
>
> and
>
> dpkg -l iscan*
how did you know i have those installed?


#
# initramfs.conf
# Configuration file for mkinitramfs(8). See initramfs.conf(5).
#
# Note that configuration options from this file can be overriden
# by config files in the /etc/initramfs-tools/conf.d directory.

#
# MODULES: [ most | netboot | dep | list ]
#
# most - Add most filesystem and all harddrive drivers.
#
# dep - Try and guess which modules to load.
#
# netboot - Add the base modules, network modules, but skip block devices.
#
# list - Only include modules from the 'additional modules' list
#

MODULES=most

#
# BUSYBOX: [ y | n ]
#
# Use busybox if available.
#

BUSYBOX=y

#
# KEYMAP: [ y | n ]
#
# Load a keymap during the initramfs stage.
#

KEYMAP=n

#
# COMPRESS: [ gzip | bzip2 | lzma | lzop ]
#

COMPRESS=gzip

#
# NFS Section of the config.
#

#
# BOOT: [ local | nfs ]
#
# local - Boot off of local media (harddrive, USB stick).
#
# nfs - Boot using an NFS drive as the root of the drive.
#

BOOT=local

#
# DEVICE: ...
#
# Specify a specific network interface, like eth0
# Overriden by optional ip= bootarg
#

DEVICE=

#
# NFSROOT: [ auto | HOST:MOUNT ]
#

NFSROOT=auto

###############################

Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
||/ Name Version Beschreibung
+++-======================================-=================================-================================================== ====
ii iscan 2.22.1-2 simple, easy to use scanner utility for EPSON scanners
un iscan-network-nt <keine> (keine Beschreibung vorhanden)
un iscan-plugin-cx4400 <keine> (keine Beschreibung vorhanden)
un iscan-plugin-gt-7200 <keine> (keine Beschreibung vorhanden)
un iscan-plugin-gt-7300 <keine> (keine Beschreibung vorhanden)
un iscan-plugin-gt-9400 <keine> (keine Beschreibung vorhanden)
un iscan-plugin-gt-f500 <keine> (keine Beschreibung vorhanden)
un iscan-plugin-gt-f520 <keine> (keine Beschreibung vorhanden)
un iscan-plugin-gt-f600 <keine> (keine Beschreibung vorhanden)
un iscan-plugin-gt-f670 <keine> (keine Beschreibung vorhanden)
un iscan-plugin-gt-f700 <keine> (keine Beschreibung vorhanden)
un iscan-plugin-gt-s600 <keine> (keine Beschreibung vorhanden)
un iscan-plugin-gt-x750 <keine> (keine Beschreibung vorhanden)

--
ciao bboett
================================================== ============
bboett@adlp.org
http://inforezo.u-strasbg.fr/~bboett/
================================================== =============
 
Old 07-05-2010, 05:21 PM
maximilian attems
 
Default Bug#588140: linux-image-2.6.32-5-amd64: can't install: dpkg: error processing linux-image-2.6-amd64

forcemerge 586554 588140
stop

On Mon, Jul 05, 2010 at 06:36:33PM +0200, Bruno Boettcher wrote:
> On Mon, Jul 05, 2010 at 02:12:32PM +0200, maximilian attems wrote:
> > wrong package, but who reads text one copies and pastes?
> hmmm i did but i was unsure whose fault it is this time ....

well the one that shows the first error message is usally the one
to hit

dpkg -S mkinitramfs-kpkg would have shown you that initramfs-tools
is the package who carries the mkinitramfs command.

> > yep.
> yes i am right to fear? or yes it will start up again?

won't boot with that initramfs, so correct fear.

> > > mkinitramfs-kpkg failed to create initrd image.
> so for future reference i should have posted the bug for that program?
> just for my culture, how do i find to which package that one belongs?

see above, hope it helped?

> > please provide output of:
> > cat /etc/initramfs-tools/initramfs.conf

ok that one is fine, so no trouble.

> > and
> >
> > dpkg -l iscan*
> how did you know i have those installed?

well we already got hit by people having it installed,
their hook script is bogus, see
bugs.debian.org/586554 for the whole story.




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100705172134.GQ9869@baikonur.stro.at">http://lists.debian.org/20100705172134.GQ9869@baikonur.stro.at
 
Old 07-05-2010, 08:41 PM
Bruno Boettcher
 
Default Bug#588140: linux-image-2.6.32-5-amd64: can't install: dpkg: error processing linux-image-2.6-amd64

On Mon, Jul 05, 2010 at 07:21:34PM +0200, maximilian attems wrote:
> dpkg -S mkinitramfs-kpkg would have shown you that initramfs-tools
> is the package who carries the mkinitramfs command.
that's what i needed !
thanks!

> see above, hope it helped?
absolutely!

> > > dpkg -l iscan*
> > how did you know i have those installed?
>
> well we already got hit by people having it installed,
> their hook script is bogus, see
> bugs.debian.org/586554 for the whole story.
argh....
purging that one did it!
awww very annoying....

but anyway thanks! now the next storm can hit my house without fear on
my side

--
ciao bboett
================================================== ============
bboett@adlp.org
http://inforezo.u-strasbg.fr/~bboett/
================================================== =============
 

Thread Tools




All times are GMT. The time now is 10:38 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org